ITOUCH-BRIDGE-MIB: View SNMP OID List / Download MIB

VENDOR: MRV COMMUNICATIONS


 Home MIB: ITOUCH-BRIDGE-MIB
Download as:   
SNMPv2-CONF, ITOUCH-MIB, IF-MIB, SNMPv2-SMI, BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 bridgeDep 1.3.6.1.4.1.33.5
 xBridge 1.3.6.1.4.1.33.19
       xBridgeSystem 1.3.6.1.4.1.33.19.1
           bridgeState 1.3.6.1.4.1.33.19.1.1 integer read-write
Controls whether the bridge will perform bridging. Enumeration: 'disabled': 1, 'enabled': 2.
           bridgeEarlyLoopState 1.3.6.1.4.1.33.19.1.2 integer read-write
Controls whether the bridge will implement the early loop detection algorithm of restarting the Spanning Tree Protocol when a packet is received from a source on one interface when the source was learned on a different interface. Enumeration: 'disabled': 1, 'enabled': 2.
           bridgeEarlyLoopCount 1.3.6.1.4.1.33.19.1.3 counter read-only
The number of times that an early loop was detected while the early loop state was enabled.
           bridgeEarlyLoopAddress 1.3.6.1.4.1.33.19.1.4 macaddress read-only
The last address to cause an early loop to be detected while the early loop state was enabled.
           bridgeSpanningTreeState 1.3.6.1.4.1.33.19.1.5 integer read-write
Controls whether the bridge will run the Spanning Tree Protocol. Enumeration: 'disabled': 1, 'enabled': 2.
           bridgeFilterDiscardTimeout 1.3.6.1.4.1.33.19.1.6 integer read-write
The number of seconds before an inactive filter is deleted. Learned filters become inactive when the use timeout (dot1dTpAgingTime) has been exceeded.
           bridgeTopologyState 1.3.6.1.4.1.33.19.1.7 integer read-only
Indicates whether the Spanning Tree Protocol's topology is stable or changing. Enumeration: 'changing': 2, 'stable': 1.
           bridgeTopologyChangeAddr 1.3.6.1.4.1.33.19.1.8 macaddress read-only
The ethernet address of the last bridge from which a Topology Change Notification packet was received.
       xBridgeProtocol 1.3.6.1.4.1.33.19.3
           bridgeProtocolFilterState 1.3.6.1.4.1.33.19.3.1 integer read-write
Controls whether protocol filtering is active. Enumeration: 'disabled': 1, 'enabled': 2.
           bridgeProtocolDefaultPriority 1.3.6.1.4.1.33.19.3.2 integer read-write
Controls the default priority if no entry exists for the protocol. Enumeration: 'high': 5, 'discard': 101, 'medium': 3, 'low': 1.
           bridgeProtocolTable 1.3.6.1.4.1.33.19.3.3 no-access
A list of bridge protocol filters.
               bridgeProtocolEntry 1.3.6.1.4.1.33.19.3.3.1 no-access
Bridge protocol filter entry.
                   bridgeProtocolProtocol 1.3.6.1.4.1.33.19.3.3.1.1 octet string read-only
The protocol type associated with the entry. The value 65536 is for all 802.3 MAC frames.
                   bridgeProtocolName 1.3.6.1.4.1.33.19.3.3.1.2 displaystring read-write
The name associated with the protocol.
                   bridgeProtocolPriority 1.3.6.1.4.1.33.19.3.3.1.3 integer read-write
The priority or action to take with the protocol. Enumeration: 'high': 5, 'discard': 101, 'medium': 3, 'low': 1.
                   bridgeProtocolUses 1.3.6.1.4.1.33.19.3.3.1.4 counter read-only
The number of times the filter has been used.
                   bridgeProtocolStatus 1.3.6.1.4.1.33.19.3.3.1.5 integer read-write
The status of the protocol entry. Set to 'invalid' to remove the entry. Enumeration: 'valid': 2, 'invalid': 1.
       xBridgeFilter 1.3.6.1.4.1.33.19.4
           bridgeFilterTable 1.3.6.1.4.1.33.19.4.1 no-access
A list of bridge filters.
               bridgeFilterEntry 1.3.6.1.4.1.33.19.4.1.1 no-access
Bridge filter entry.
                   bridgeFilterForwardSubPort 1.3.6.1.4.1.33.19.4.1.1.1 integer read-write
The unique identifier from which the address has been seen within the port. It is the DLCI for frame relay or VC for X25.
                   bridgeFilterUses 1.3.6.1.4.1.33.19.4.1.1.2 counter read-only
The number of times the filter has been used for forwarding packets.
                   bridgeFilterAge 1.3.6.1.4.1.33.19.4.1.1.3 integer read-only
The number of seconds that a learned filter has been active or inactive. This value has no meaning for non-learned filters.
           bridgeFilterLinkTable 1.3.6.1.4.1.33.19.4.2 no-access
Bridge filtering characteristics of all links.
               bridgeFilterLinkEntry 1.3.6.1.4.1.33.19.4.2.1 no-access
Bridge filtering characteristics of a specific link.
                   bridgeFilterLinkOverflowCam 1.3.6.1.4.1.33.19.4.2.1.1 integer read-write
Identifies the number of extra entries in a hardware assist filter CAM that the user wants to have available to cover CAM entry overflow conditions. If filtering hardware is present, this field defaults to 400. Otherwise, it is zero.