IP-INTERFACE-MANAGEMENT-MIB: View SNMP OID List / Download MIB

VENDOR: LUCENT TECHNOLOGIES


 Home MIB: IP-INTERFACE-MANAGEMENT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, Cajun-ROOT, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cjnIpIfMgmt 1.3.6.1.4.1.1751.2.43.3.1
Cajun Private IP Interface Management MIB
     cjnIpIfGroup 1.3.6.1.4.1.1751.2.43.3.1.1
         cjnIpIfNextIndex 1.3.6.1.4.1.1751.2.43.3.1.1.1 integer read-only
The next available IfIndex. This number should be used to create new rows in the IpIfTable
         cjnIpIfTable 1.3.6.1.4.1.1751.2.43.3.1.1.2 no-access
A list of Cajun IP interface entries. The number of entries is given by the value of cjnIpIfNumber.
             cjnIpIfEntry 1.3.6.1.4.1.1751.2.43.3.1.1.2.1 no-access
An cajun IP Interface instance
                 cjnIpIfIndex 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.1 integer read-only
The globally unique identifier for this interface. This number MUST correlate with the IfTable's IfIndex in MIB-II or RFC2233
                 cjnIpIfRowStatus 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.2 rowstatus read-only
The Status of this entry in the table. Note the available states: active(1), -- Obviously Active. notInService(2) -- Interface configured but disabled. notReady(3), -- Interface NOT configured. createAndGo(4), createAndWait(5) or destroy(6)
                 cjnIpIfIpAddress 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.3 ipaddress read-only
The IP Address associated with this IP interface.
                 cjnIpIfIpSubnetMask 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.4 ipaddress read-only
The IP Subnet Mask associated with this IP interface.
                 cjnIpIfMacFormat 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.5 integer read-only
The ethernet framing type used on this IP interface. Enumeration: 'snap': 1, 'ethernetV2': 0.
                 cjnIpIfVlanIfIndex 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.6 integer read-only
The interface index of the VLAN or Ethernet or Serial console for this interface. This number MUST correlate with the IfTable's IfIndex in MIB-II or RFC2233.
                 cjnIpIfName 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.7 octet string read-only
The protocol Unique name associated with this interface. This name is limited to 32 characters and may appear in other protocol interface entry such as IPX, Appletalk but MAY NOT be duplicated within the cjnIpIfTable. In otherwords other protocols can use this interface name but IP may only have this name associated with one interface.
                 cjnIpIfIpRouting 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.8 integer read-only
The Consumption / Forwarding mode assocated with this IP Interface. The RoutingAndMgmt mode enables IP Routing and local Packet consumption. The MgmtOnly mode disables IP Forwarding but continues to allow local Packet consumption on this interface. The routingOnly mode is disables Local Packet consumption but continues to allow IP Forwarding on this interface Enumeration: 'routingAndMgmt': 0, 'mgmtOnly': 1, 'routingOnly': 2.
                 cjnIpIfSpoofCheckEnabled 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.9 integer read-only
This feature is not supported at this time. Enumeration: 'enable': 1, 'disable': 2.
                 cjnIpIfProxyArpEnabled 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.10 integer read-only
enables / disables Proxy Arp functionality on this interface. Enumeration: 'disabled': 2, 'enabled': 1.
                 cjnIpIfIcmpRedirEnabled 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.11 integer read-only
enables / disables Icmp Redirect messages from originating from this interface. Enumeration: 'disabled': 2, 'enabled': 1.
                 cjnIpIfUdpRbcastMode 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.12 integer read-only
configures the NetBIOS UDP Rebroadcast mode on this interface. Enumeration: 'inbound': 1, 'both': 3, 'disable': 0, 'outbound': 2.
                 cjnIpIfAdminStatus 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.13 integer read-only
The administrative state of this interface. Enumeration: 'down': 2, 'testing': 3, 'up': 1.
                 cjnIpIfStatus 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.14 integer read-only
The current state of this interface. Enumeration: 'down': 2, 'up': 1.
                 cjnIpIfBootpDhcpGateway 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.15 integer read-only
Enable or disable the designation of this interface as that which will 'receive' BOOTP/DHCP requests with a source IP address of 0.0.0.0. This is used on a multinetted interface when it is otherwise ambiguous as to which interface 'receives' the request, and is important because the IP address of the receiving interface is inserted into the giaddr field of the request before the request is relayed to the BOOTP/DHCP server. If this attribute is disabled, then: - if only one IP interface exists on a VLAN, that IP address is inserted into the request - if more than one IP address exists on a VLAN, the router will choose an interface If more than one IP interface on a given VLAN has this attribute enabled, the router will choose an interface among those with the attribute enabled. Enumeration: 'enable': 1, 'disable': 2.