INTEL-MPLINK-MIB: View SNMP OID List / Download MIB

VENDOR: INTEL CORPORATION


 Home MIB: INTEL-MPLINK-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, INTEL-GEN-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mpl 1.3.6.1.4.1.343.6.20
       mplService 1.3.6.1.4.1.343.6.20.1
           mplServiceTable 1.3.6.1.4.1.343.6.20.1.1 no-access
This table contains information on MP Links. These entries applies to LAN entries as well as WAN entries.
               mplServiceEntry 1.3.6.1.4.1.343.6.20.1.1.1 no-access
Information on a particular MP Link.
                   mplServiceNumber 1.3.6.1.4.1.343.6.20.1.1.1.1 integer read-only
The MP Link number. The MP Link number is the same as the ifIndex for the corresponding upper group in the MIB-2 ifGroup.
                   mplServiceSlotNumber 1.3.6.1.4.1.343.6.20.1.1.1.2 integer read-only
The Slot position of the card. Set to 0 for stand-alone products.
                   mplServicePlugNumber 1.3.6.1.4.1.343.6.20.1.1.1.3 integer read-only
The plug number of the physical interface to which the MP Link is associated.
                   mplServicePlugName 1.3.6.1.4.1.343.6.20.1.1.1.4 displaystring read-only
The name of the physical interface to which the MP Link is associated.
                   mplServiceAttachment 1.3.6.1.4.1.343.6.20.1.1.1.5 attachment read-only
The connector type used to connect the router to the LAN or WAN.
                   mplServiceProvider 1.3.6.1.4.1.343.6.20.1.1.1.6 integer read-only
The type of provider for this MP Link. For WAN links this specifies the actual protocol stack. Enumeration: 'x25Attachment': 10, 'lan': 1, 'pppTcpTunnel': 16, 'pppPcmcia': 15, 'pppPcmciaModem': 17, 'isdnAttachment': 8, 'asyncAttachment': 20, 'lapbHdlc': 2, 'frHdlc': 4, 'pppIsdn': 7, 'pppX31': 21, 'pppX25': 14, 'frAttachment': 5, 'padX25': 18, 'slip': 11, 'x25Lapb': 9, 'pppAsync': 19, 'pppMultiMaster': 12, 'pppHdlc': 3, 'lapbIsdn': 6, 'pppAodi': 13.
                   mplServiceBytesSentUpper 1.3.6.1.4.1.343.6.20.1.1.1.7 counter read-only
The upper 32 bits of the 64 bits counter which is the number of octets (bytes) sent via the MP Link.
                   mplServiceBytesSentLower 1.3.6.1.4.1.343.6.20.1.1.1.8 counter read-only
The lower 32 bits of the 64 bits counter which is the number of octets (bytes) sent via the MP Link.
                   mplServiceBytesReceivedUpper 1.3.6.1.4.1.343.6.20.1.1.1.9 counter read-only
The lower 32 bits of the 64 bits counter which is the number of octets (bytes) sent via the MP Link.
                   mplServiceBytesReceivedLower 1.3.6.1.4.1.343.6.20.1.1.1.10 counter read-only
The lower 32 bits of the 64 bits counter which is the number of octets (bytes) received via the MP Link.
                   mplServiceLock 1.3.6.1.4.1.343.6.20.1.1.1.11 onoff read-write
Indicates whether an MP Link has been locked from local management. The link may be unlocked by setting the value to 'off' and locked by setting the value to 'on'.
       mplLanSpecific 1.3.6.1.4.1.343.6.20.2
           mplLanTable 1.3.6.1.4.1.343.6.20.2.1 no-access
This table contains information on LAN MP Links.
               mplLanEntry 1.3.6.1.4.1.343.6.20.2.1.1 no-access
Information on a particular LAN MP Link.
                   mplLanNumber 1.3.6.1.4.1.343.6.20.2.1.1.1 integer read-only
The LAN MP Link number. The MP Link number is the same as the ifIndex for the corresponding upper group in the MIB-2 ifGroup.
                   mplLanRxCRCErrors 1.3.6.1.4.1.343.6.20.2.1.1.2 counter read-only
The number of frames received which were discarded due to Cyclic Redundancy Check (CRC) errors.
                   mplLanRxOverrun 1.3.6.1.4.1.343.6.20.2.1.1.3 counter read-only
The number of frames received which were lost due to RAM overloads within the router. This should not occur.
                   mplLanRxLong 1.3.6.1.4.1.343.6.20.2.1.1.4 counter read-only
The number of frames received which were discarded due to being larger than the maximum allowable length on the LAN.
                   mplLanRxOverflow 1.3.6.1.4.1.343.6.20.2.1.1.5 counter read-only
The number of frames received which were discarded due to lack of buffer capacity.
                   mplLanRxAlnErrors 1.3.6.1.4.1.343.6.20.2.1.1.6 counter read-only
The number of frames received which were discarded due to having the wrong frame length.
                   mplLanRxOuts 1.3.6.1.4.1.343.6.20.2.1.1.7 counter read-only
The number of frames received which were processed by higher layer protocols.
                   mplLanRxShort 1.3.6.1.4.1.343.6.20.2.1.1.8 counter read-only
The number of frames received which were discarded due to being shorter than the smallest allowable length on the LAN.
                   mplLanTxDeferred 1.3.6.1.4.1.343.6.20.2.1.1.9 counter read-only
The number of outgoing frames which were discarded due to a busy link.
                   mplLanTxUnderrun 1.3.6.1.4.1.343.6.20.2.1.1.10 counter read-only
The number of outgoing frames which were discarded due to overload.
                   mplLanTxSQEFailure 1.3.6.1.4.1.343.6.20.2.1.1.11 counter read-only
The number of outbound frames which had Signal Quality Errors (SQE).
                   mplLanTxExcDeferral 1.3.6.1.4.1.343.6.20.2.1.1.12 counter read-only
The number of transmission attempts which were delayed for more than 3.2 ms.
                   mplLanTxCollExceed 1.3.6.1.4.1.343.6.20.2.1.1.13 counter read-only
The number of outbound frames which were discarded due to exceeding 16 collisions on the Ethernet.
                   mplLanTxLateColl 1.3.6.1.4.1.343.6.20.2.1.1.14 counter read-only
The number of collisions occurring after the first 512 bytes of a frame had been transmitted.
                   mplLanTxCollisions 1.3.6.1.4.1.343.6.20.2.1.1.15 counter read-only
The number of outgoing frames which were discarded due to collisions that occurred during transmissions.
                   mplLanTxNoCarrier 1.3.6.1.4.1.343.6.20.2.1.1.16 counter read-only
The number of No Carrier detections during transmissions.
       mplWanSpecific 1.3.6.1.4.1.343.6.20.3
           mplWanTable 1.3.6.1.4.1.343.6.20.3.1 no-access
This table contains information on WAN MP Links.
               mplWanEntry 1.3.6.1.4.1.343.6.20.3.1.1 no-access
Information on a particular WAN MP Link.
                   mplWanNumber 1.3.6.1.4.1.343.6.20.3.1.1.1 integer read-only
The WAN MP Link number. The MP Link number is the same as the ifIndex for the corresponding upper group in the MIB-2 ifGroup.
                   mplWanDataState 1.3.6.1.4.1.343.6.20.3.1.1.2 datastate read-only
The state of the MP Link seen from the higher layer protocol.
                   mplWanDataStateTimer 1.3.6.1.4.1.343.6.20.3.1.1.3 integer read-only
The time in seconds since the MP Link entered the Data State.
                   mplWanConnectState 1.3.6.1.4.1.343.6.20.3.1.1.4 connectstate read-only
Indicates the connection state of the WAN MP Link.
                   mplWanConnectStateTimer 1.3.6.1.4.1.343.6.20.3.1.1.5 integer read-only
The time in seconds since the MP Link entered the Connect State.
                   mplWanCompression 1.3.6.1.4.1.343.6.20.3.1.1.6 onoff read-only
Indicates if data compression is used over the WAN MP Link. For frame relay links compression is not negotiated. For all other WAN protocols the compression will remain 'off' if not configured in both routers over the link.
                   mplWanCompressionType 1.3.6.1.4.1.343.6.20.3.1.1.7 comptype read-only
Proprietary compression is used for LAPB and X.25 MP Links. For all other WAN protocols the Stac compression algorithm is used.
                   mplWanCallsSucceeded 1.3.6.1.4.1.343.6.20.3.1.1.8 counter read-only
The number of outgoing call which succeeded in making the connection.
                   mplWanCallsFailed 1.3.6.1.4.1.343.6.20.3.1.1.9 counter read-only
The number of outgoing call which failed to make the connection.
                   mplWanCallsAccepted 1.3.6.1.4.1.343.6.20.3.1.1.10 counter read-only
The number of incoming calls which were accepted on this link.
                   mplWanCallsRejected 1.3.6.1.4.1.343.6.20.3.1.1.11 counter read-only
The number of incoming calls which were rejected on this link.
                   mplWanRetries 1.3.6.1.4.1.343.6.20.3.1.1.12 integer read-write
The number of retries made for outgoing calls. May be set to zero which causes the call sequence to restarted.
                   mplWanDirection 1.3.6.1.4.1.343.6.20.3.1.1.13 direction read-only
Shows who initiated the call. 'incoming' if the call was initiated by the remote router and 'outgoing' if the call was inititated by this router. For PPP Multi Links the direction refers the the direction of the first slave link.
                   mplWanHasBackup 1.3.6.1.4.1.343.6.20.3.1.1.14 onoff read-only
Indicates whether this link has a backup link configured for it.
                   mplWanBackupFor 1.3.6.1.4.1.343.6.20.3.1.1.15 integer read-only
Shows the primary link for which this link is the backup. The value 0 indicates that this is not a backup link.
                   mplWanBackupForAttachment 1.3.6.1.4.1.343.6.20.3.1.1.16 onoff read-only
Indicates whether this link is a backup for an attachment.
                   mplWanFlags 1.3.6.1.4.1.343.6.20.3.1.1.17 integer read-only
WAN Flags dataCompressionMask 0x0001 acceptIncomingMask 0x0002 permitOutgoingMask 0x0004 permitTimeCutMask 0x0008 chapMask 0x0010 - CHAP, PPP only papMask 0x0020 - PAP, PPP only onlyReplyChapMask 0x0040 slaveLink 0x0080 blockOutgoing 0x0100 blockIncoming 0x0200 isLeased 0x0400 dataCompressionMode 0x0800 - PPP new-stac compression flag activitySoft 0x1000 - Activity timer only sends trap
                   mplWanPppMaster 1.3.6.1.4.1.343.6.20.3.1.1.18 integer read-only
Indicates the master link for a slave link. For master links and links not associated with a PPP Multi Link the value is 0.
                   mplWanPppSlaveUpCount 1.3.6.1.4.1.343.6.20.3.1.1.19 integer read-only
The number of slave links in Connect State 'up'. For slave links and links not associated with a PPP Multi Link the value is 1.
                   mplWanActivityTimeLeft 1.3.6.1.4.1.343.6.20.3.1.1.20 integer read-only
The time remaining in seconds until the Daily Activity Limit will close and lock the link. When the Daily Activity Limit has been reached, the link can be activated by setting mplWanActivity to 'on'.
                   mplWanActivity 1.3.6.1.4.1.343.6.20.3.1.1.21 onoff read-write
Indicates whether the Daily Activity Limit has been reached and locked the link. To unlock the link set the value to 'off'. It is not possible to set to the value to 'on'.
                   mplWanTimer 1.3.6.1.4.1.343.6.20.3.1.1.22 onoff read-only
Indicates whether an MP Link timer has locked the link. 'on' means the link is locked.
                   mplWanTimeTillTimecut 1.3.6.1.4.1.343.6.20.3.1.1.23 integer read-only
Time left in seconds until time cut
                   mplWanLastPacket 1.3.6.1.4.1.343.6.20.3.1.1.24 octet string read-only
The first byte in this string identifies the type of packet that opened the link the last time. IP 1 Internet Protocols 0xcc IPX 2 Novell IPX 0x800000008137 STA_ETH 3 Bridge-Ether 0x800080c20007 STA_FRAG 4 Bridge-Frag 0x800080c2000d STA_BPDU 5 Bridge-BPDU 0x800080c2000e STA_CRAY 6 Bridge-Cray 0x800000800500 STA_ETH_FCS 15 Bridge-FCS After this byte follows a part of the packet header.
                   mplWanInCallsPlaced 1.3.6.1.4.1.343.6.20.3.1.1.25 counter read-only
??? Number of calls placed.
                   mplWanOutCallsPlaced 1.3.6.1.4.1.343.6.20.3.1.1.26 counter read-only
??? Number of calls placed.
                   mplWanInTimeActive 1.3.6.1.4.1.343.6.20.3.1.1.27 integer read-only
The time in seconds that the link was in the Up state for incoming calls.
                   mplWanOutTimeActive 1.3.6.1.4.1.343.6.20.3.1.1.28 integer read-only
The time in seconds that the link was in the Up state for outcoming calls.
                   mplWanTotalTime 1.3.6.1.4.1.343.6.20.3.1.1.29 integer read-only
???
           mplCompTable 1.3.6.1.4.1.343.6.20.3.2 no-access
Compression table with counters and other information regarding the Transmit and Receive Decoder.
               mplCompEntry 1.3.6.1.4.1.343.6.20.3.2.1 no-access
                   mplCompNumber 1.3.6.1.4.1.343.6.20.3.2.1.1 integer read-only
The WAN MP Link number. The MP Link number is the same as the ifIndex for the corresponding upper group in the MIB-2 ifGroup.
                   mplCompRxDecRxBytesTotalUpper 1.3.6.1.4.1.343.6.20.3.2.1.2 counter read-only
The upper 32 bits of the 64 bits counter which is the number of bytes received by the Receive Decoder.
                   mplCompRxDecRxBytesTotalLower 1.3.6.1.4.1.343.6.20.3.2.1.3 counter read-only
The lower 32 bits of the 64 bits counter which is the number of bytes received by the Receive Decoder.
                   mplCompRxDecRxBytesDecompUpper 1.3.6.1.4.1.343.6.20.3.2.1.4 counter read-only
The upper 32 bits of the 64 bits counter which is the number of bytes sent by the Receive Decoder.
                   mplCompRxDecRxBytesDecompLower 1.3.6.1.4.1.343.6.20.3.2.1.5 counter read-only
The lower 32 bits of the 64 bits counter which is the number of bytes sent by the Receive Decoder.
                   mplCompRxDecDecompressedUpper 1.3.6.1.4.1.343.6.20.3.2.1.6 counter read-only
The upper 32 bits of the 64 bits counter which is the number of packets decompressed by the Receive Decoder.
                   mplCompRxDecDecompressedLower 1.3.6.1.4.1.343.6.20.3.2.1.7 counter read-only
The lower 32 bits of the 64 bits counter which is the number of packets decompressed by the Receive Decoder.
                   mplCompRxDecAllocErrorsUpper 1.3.6.1.4.1.343.6.20.3.2.1.8 counter read-only
The upper 32 bits of the 64 bits counter which is the number of allocation errors in the Receive Decoder.
                   mplCompRxDecAllocErrorsLower 1.3.6.1.4.1.343.6.20.3.2.1.9 counter read-only
The lower 32 bits of the 64 bits counter which is the number of allocation errors in the Receive Decoder.
                   mplCompRxDecRemoteInits 1.3.6.1.4.1.343.6.20.3.2.1.10 counter read-only
Number of remote initializations by the Receive Decoder.
                   mplCompTxEncInBytesTotalUpper 1.3.6.1.4.1.343.6.20.3.2.1.11 counter read-only
The upper 32 bits of the 64 bits counter which is the number of bytes received by the Transmit Decoder.
                   mplCompTxEncInBytesTotalLower 1.3.6.1.4.1.343.6.20.3.2.1.12 counter read-only
The lower 32 bits of the 64 bits counter which is the number of bytes received by the Transmit Decoder.
                   mplCompTxEncTxBytesCompUpper 1.3.6.1.4.1.343.6.20.3.2.1.13 counter read-only
The upper 32 bits of the 64 bits counter which is the number of bytes sent by the Transmit Decoder.
                   mplCompTxEncTxBytesCompLower 1.3.6.1.4.1.343.6.20.3.2.1.14 counter read-only
The lower 32 bits of the 64 bits counter which is the number of bytes sent by the Transmit Decoder.
                   mplCompTxEncCompressedUpper 1.3.6.1.4.1.343.6.20.3.2.1.15 counter read-only
The upper 32 bits of the 64 bits counter which is the number of packets compressed by the Transmit Decoder.
                   mplCompTxEncCompressedLower 1.3.6.1.4.1.343.6.20.3.2.1.16 counter read-only
The lower 32 bits of the 64 bits counter which is the number of packets compressed by the Transmit Decoder.
                   mplCompTxEncAllocErrorsUpper 1.3.6.1.4.1.343.6.20.3.2.1.17 counter read-only
The upper 32 bits of the 64 bits counter which is the number of allocation errors in the Transmit Decoder.
                   mplCompTxEncAllocErrorsLower 1.3.6.1.4.1.343.6.20.3.2.1.18 counter read-only
The lower 32 bits of the 64 bits counter which is the number of allocation errors in the Transmit Decoder.
                   mplCompTxEncLocalInits 1.3.6.1.4.1.343.6.20.3.2.1.19 counter read-only
Number of local initializations by the Receive Decoder.
                   mplCompTxEncTransmitErrors 1.3.6.1.4.1.343.6.20.3.2.1.20 integer read-only
Number of transmit errors
                   mplCompTxEncQueueLength 1.3.6.1.4.1.343.6.20.3.2.1.21 integer read-only
Queue length
       mplIfSpecific 1.3.6.1.4.1.343.6.20.4
           mplIfStackTable 1.3.6.1.4.1.343.6.20.4.1 no-access
This table contains information on the relationships between the multiple sub-layers of network interfaces. In particular, it contains information on which sub- layers run 'on top of' which other sub-layers. Each sub-layer corresponds to a conceptual row in the ifTable.
               mplIfStackEntry 1.3.6.1.4.1.343.6.20.4.1.1 no-access
Information on a particular relationship between two sub-layers, specifying that one sub-layer runs on 'top' of the other sub-layer. Each sub-layer corresponds to a conceptual row in the ifTable.
                   mplIfStackNumber 1.3.6.1.4.1.343.6.20.4.1.1.1 integer read-only
The MP Link number. The MP Link number is the same as the ifIndex for the corresponding upper group in the MIB-2 ifGroup.
                   mplIfStackLowerLayer 1.3.6.1.4.1.343.6.20.4.1.1.2 integer read-only
The value of ifIndex corresponding to the lower sub- layer of the relationship, i.e., the sub-layer which runs 'below' the sub-layer identified by the corresponding instance of mplIfStackNumber. If there is no lower sub-layer, then this object has the value 0.
       mplGeneral 1.3.6.1.4.1.343.6.20.5
           mplGeneralOverviewChange 1.3.6.1.4.1.343.6.20.5.1 timeticks read-only
The value of sysUpTime at the time any MP Link seen from the overview changed state or the like.
           mplGeneralIfgroupStatus 1.3.6.1.4.1.343.6.20.5.2 octet string read-only
A table describing the status of all ifgroups. Bit 0-3: State: 001 = Up, 010 = Down, 011 = Timecut, 100 = Disabled 111 = Lock. Bit 4: Reserved for future use Bit 5: IP status: 1 = Up, 0 = Down. (This bit is only used for MPLinks) Bit 6: IPX status: 1 = Up, 0 = Down. (This bit is only used for MPLinks) Bit 7: Bridge status: 1 = Up, 0 = Down. (This bit is only used for MPLinks)
       mplUtilization 1.3.6.1.4.1.343.6.20.6
           mplUtilizationTable 1.3.6.1.4.1.343.6.20.6.1 no-access
Utilization table
               mplUtilizationEntry 1.3.6.1.4.1.343.6.20.6.1.1 no-access
                   mplUtilizationPlugNumber 1.3.6.1.4.1.343.6.20.6.1.1.1 integer read-only
                   mplUtilizationMplink 1.3.6.1.4.1.343.6.20.6.1.1.2 integer read-only
                   mplUtilizationUser 1.3.6.1.4.1.343.6.20.6.1.1.3 userenum read-only
                   mplUtilizationProtocol 1.3.6.1.4.1.343.6.20.6.1.1.4 protoenum read-only
                   mplUtilizationRxUtil 1.3.6.1.4.1.343.6.20.6.1.1.5 counter read-only
                   mplUtilizationTxUtil 1.3.6.1.4.1.343.6.20.6.1.1.6 counter read-only
         mplLockEvent 1.3.6.1.4.1.343.6.200.1
Lock state changed to for link . This trap is sent when an MP Link is locked or unlocked from local management or via SNMP.
         mplWanRetriesEvent 1.3.6.1.4.1.343.6.200.2
Max. retries exceeded () for link . This trap is sent when an MP Link has had more failed connect-attempts than allowed in the configuration.
         mplWanActivityEvent 1.3.6.1.4.1.343.6.200.3
Daily Activity Limit has been reached. Link locked. This trap is sent when the Daily Activity Limit has been reached and locked the link.
         mplWanTimerEvent 1.3.6.1.4.1.343.6.200.4
Link timer has changed lock state to for link . This trap is sent when an MP Link timer has locked or unlocked the link.