IEEE8021-CFM-V2-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: IEEE8021-CFM-V2-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, IEEE8021-TC-MIB, SNMPv2-TC, IEEE8021-CFM-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ieee8021CfmV2Mib 1.3.111.2.802.1.1.7
Connectivity Fault Management V2 module. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q-2014. Copyright (C) IEEE (2014). This version of this MIB module is part of IEEE Std 802.1Q; see the draft itself for full legal notices.
             ieee8021CfmStackTable 1.3.111.2.802.1.1.8.1.1.2 no-access
There is one CFM Stack table per Bridge. It permits the retrieval of information about the Maintenance Points configured on any given interface.
                 ieee8021CfmStackEntry 1.3.111.2.802.1.1.8.1.1.2.1 no-access
The Stack table entry
                     ieee8021CfmStackifIndex 1.3.111.2.802.1.1.8.1.1.2.1.1 interfaceindex no-access
This object represents the Bridge Port or aggregated port on which MEPs or MHFs might be configured. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable, and rearrange the ieee8021CfmStackTable, so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the system restart. If no such entry exists, then the system SHALL delete all entries in the ieee8021CfmStackTable with the interface index.
                     ieee8021CfmStackServiceSelectorType 1.3.111.2.802.1.1.8.1.1.2.1.2 ieee8021serviceselectortype no-access
Type of the Service Selector identifier indicated by ieee8021CfmStackServiceSelectorOrNone. See textual convention IEEE8021ServiceSelectorType for details.
                     ieee8021CfmStackServiceSelectorOrNone 1.3.111.2.802.1.1.8.1.1.2.1.3 ieee8021serviceselectorvalueornone no-access
Service Selector identifier to which the MP is attached, or 0, if none. See textual convention IEEE8021ServiceSelectorValue for details.
                     ieee8021CfmStackMdLevel 1.3.111.2.802.1.1.8.1.1.2.1.4 dot1agcfmmdlevel no-access
MD Level of the Maintenance Point.
                     ieee8021CfmStackDirection 1.3.111.2.802.1.1.8.1.1.2.1.5 dot1agcfmmpdirection no-access
Direction in which the MP faces on the Bridge Port
                     ieee8021CfmStackMdIndex 1.3.111.2.802.1.1.8.1.1.2.1.6 unsigned32 read-only
The index of the Maintenance Domain in the ieee8021CfmMdTable to which the MP is associated, or 0, if none.
                     ieee8021CfmStackMaIndex 1.3.111.2.802.1.1.8.1.1.2.1.7 unsigned32 read-only
The index of the MA in the dot1agCfmMaNetTable and ieee8021CfmMaCompTable to which the MP is associated, or 0, if none.
                     ieee8021CfmStackMepId 1.3.111.2.802.1.1.8.1.1.2.1.8 dot1agcfmmepidorzero read-only
If an MEP is configured, the MEPID, else 0
                     ieee8021CfmStackMacAddress 1.3.111.2.802.1.1.8.1.1.2.1.9 macaddress read-only
MAC address of the MP.
             ieee8021CfmDefaultMdTable 1.3.111.2.802.1.1.8.1.2.5 no-access
For each Bridge component, the Default MD Level Managed Object controls MHF creation for VIDs that are not attached to a specific Maintenance Association Managed Object, and Sender ID TLV transmission by those MHFs. For each Bridge Port, and for each VLAN ID whose data can pass through that Bridge Port, an entry in this table is used by the algorithm in 22.2.3 only if there is no entry in the Maintenance Association table defining an MA for the same VLAN ID and MD Level as this table's entry, and on which MA an Up MEP is defined. If there exists such an MA, that MA's objects are used by the algorithm in 22.2.3 in place of this table entry's objects. The agent maintains the value of ieee8021CfmDefaultMdStatus to indicate whether this entry is overridden by an MA. When first initialized, the agent creates this table automatically with entries for all VLAN IDs, with the default values specified for each object. After this initialization, the writable objects in this table need to be persistent upon reboot or restart of a device.
                 ieee8021CfmDefaultMdEntry 1.3.111.2.802.1.1.8.1.2.5.1 no-access
The Default MD Level table entry.
                     ieee8021CfmDefaultMdComponentId 1.3.111.2.802.1.1.8.1.2.5.1.1 ieee8021pbbcomponentidentifier no-access
The Bridge component within the system to which the information in this ieee8021CfmDefaultMdEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1.
                     ieee8021CfmDefaultMdPrimarySelectorType 1.3.111.2.802.1.1.8.1.2.5.1.2 ieee8021serviceselectortype no-access
Type of the Primary Service Selector identifier indicated by ieee8021CfmDefaultMdPrimarySelector. See textual convention IEEE8021ServiceSelectorType for details.
                     ieee8021CfmDefaultMdPrimarySelector 1.3.111.2.802.1.1.8.1.2.5.1.3 ieee8021serviceselectorvalue no-access
Primary Service Selector identifier of a Service Instance with no MA configured. See IEEE8021ServiceSelectorValue for details.
                     ieee8021CfmDefaultMdStatus 1.3.111.2.802.1.1.8.1.2.5.1.4 truthvalue read-only
State of this Default MD Level table entry. True if there is no entry in the Maintenance Association table defining an MA for the same VLAN ID and MD Level as this table's entry, and on which MA an Up MEP is defined, else false.
                     ieee8021CfmDefaultMdLevel 1.3.111.2.802.1.1.8.1.2.5.1.5 dot1agcfmmdlevelornone read-write
A value indicating the MD Level at which MHFs are to be created, and Sender ID TLV transmission by those MHFs is to be controlled, for the VLAN to which this entry's objects apply.
                     ieee8021CfmDefaultMdMhfCreation 1.3.111.2.802.1.1.8.1.2.5.1.6 dot1agcfmmhfcreation read-write
A value indicating if the Management entity can create MHFs (MIP Half Function) for this VID at this MD Level. If this object has the value defMHFdefer, MHF creation for this VLAN is controlled by ieee8021CfmDefaultMdDefMhfCreation. The value of this variable is meaningless if the values of ieee8021CfmDefaultMdStatus is false.
                     ieee8021CfmDefaultMdIdPermission 1.3.111.2.802.1.1.8.1.2.5.1.7 dot1agcfmidpermission read-write
Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MHFs created by the Default Maintenance Domain. If this object has the value sendIdDefer, Sender ID TLV transmission for this VLAN is controlled by ieee8021CfmDefaultMdDefIdPermission. The value of this variable is meaningless if the values of ieee8021CfmDefaultMdStatus is false.
             ieee8021CfmVlanTable 1.3.111.2.802.1.1.8.1.3.2 no-access
This table defines the association of VIDs into VLANs. There is an entry in this table, for each component of the Bridge, for each VID that is: a) a VID belonging to a VLAN associated with more than one VID; and b) not the Primary VID of that VLAN. The entry in this table contains the Primary VID of the VLAN. By default, this table is empty, meaning that every VID is the Primary VID of a single-VID VLAN. VLANs that are associated with only one VID SHOULD NOT have an entry in this table. The writable objects in this table need to be persistent upon reboot or restart of a device.
                 ieee8021CfmVlanEntry 1.3.111.2.802.1.1.8.1.3.2.1 no-access
The VLAN table entry.
                     ieee8021CfmVlanComponentId 1.3.111.2.802.1.1.8.1.3.2.1.1 ieee8021pbbcomponentidentifier no-access
The Bridge component within the system to which the information in this ieee8021CfmVlanEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1.
                     ieee8021CfmVlanSelector 1.3.111.2.802.1.1.8.1.3.2.1.3 ieee8021serviceselectorvalue no-access
This is a service ID belonging to a service that is associated with more than one Service Selector identifiers, and this is not the Primary Service ID of the service. The type of this Service Selector is the same as the primary Service Selector's type defined by ieee8021CfmMaCompPrimarySelectorType in the ieee8021CfmMaCompTable.
                     ieee8021CfmVlanPrimarySelector 1.3.111.2.802.1.1.8.1.3.2.1.5 ieee8021serviceselectorvalue read-only
This is the Primary Service selector for a Service that is associated with more than one Service Selector identifiers. This value MUST not equal the value of ieee8021CfmVlanSelector. The type of this Service Selector is the same as the primary Service Selector's type defined by ieee8021CfmMaCompPrimarySelectorType in the ieee8021CfmMaCompTable.
                     ieee8021CfmVlanRowStatus 1.3.111.2.802.1.1.8.1.3.2.1.6 rowstatus read-only
The status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated.
             ieee8021CfmConfigErrorListTable 1.3.111.2.802.1.1.8.1.4.2 no-access
The CFM Configuration Error List table provides a list of Interfaces and VIDs that are incorrectly configured.
                 ieee8021CfmConfigErrorListEntry 1.3.111.2.802.1.1.8.1.4.2.1 no-access
The Config Error List Table entry
                     ieee8021CfmConfigErrorListSelectorType 1.3.111.2.802.1.1.8.1.4.2.1.1 ieee8021serviceselectortype no-access
Type of the Service Selector identifier indicated by ieee8021CfmConfigErrorListSelector. See textual convention IEEE8021ServiceSelectorType for details.
                     ieee8021CfmConfigErrorListSelector 1.3.111.2.802.1.1.8.1.4.2.1.2 ieee8021serviceselectorvalue no-access
The Service Selector Identifier of the Service with interfaces in error. See IEEE8021ServiceSelectorValue for details.
                     ieee8021CfmConfigErrorListIfIndex 1.3.111.2.802.1.1.8.1.4.2.1.3 interfaceindex no-access
This object is the IfIndex of the interface. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the system restart. If no such entry exists, then the system SHALL delete any entries in ieee8021CfmConfigErrorListTable indexed by that InterfaceIndex value.
                     ieee8021CfmConfigErrorListErrorType 1.3.111.2.802.1.1.8.1.4.2.1.4 dot1agcfmconfigerrors read-only
A vector of Boolean error conditions from 22.2.4, any of which may be true: 0) CFMleak; 1) ConflictingVids; 2) ExcessiveLevels; 3) OverlappedLevels.
             ieee8021CfmMaCompTable 1.3.111.2.802.1.1.8.1.6.4 no-access
The Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. This is the part of the complete MA table that is variable across the Bridges in a Maintenance Domain, or across the components of a single Bridge. That part of the MA table that is constant across the Bridges and their components in a Maintenance Domain is contained in the dot1agCfmMaNetTable. This table uses three indices, first index is the IEEE8021PbbComponentIdentifier that identifies the component within the Bridge for which the information in the ieee8021CfmMaCompEntry applies. The second is the index of the Maintenance Domain table. The third index is the same as the index of the ieee8021CfmMaNetEntry for the same MA. The writable objects in this table need to be persistent upon reboot or restart of a device.
                 ieee8021CfmMaCompEntry 1.3.111.2.802.1.1.8.1.6.4.1 no-access
The MA table entry.
                     ieee8021CfmMaComponentId 1.3.111.2.802.1.1.8.1.6.4.1.1 ieee8021pbbcomponentidentifier no-access
The Bridge component within the system to which the information in this ieee8021CfmMaCompEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1.
                     ieee8021CfmMaCompPrimarySelectorType 1.3.111.2.802.1.1.8.1.6.4.1.2 ieee8021serviceselectortype read-only
Type of the Service Selector identifiers indicated by ieee8021CfmMaCompPrimarySelectorOrNone. If the service instance is defined by more than one Service Selector, this parameter also indicates the type of the ieee8021CfmVlanPrimarySelector and ieee8021CfmVlanSelector in the ieee8021CfmVlanTable. In Services instances made of multiple Service Selector identifiers, ensures that the type of the Service selector identifiers is the same. See textual convention IEEE8021ServiceSelectorType for details.
                     ieee8021CfmMaCompPrimarySelectorOrNone 1.3.111.2.802.1.1.8.1.6.4.1.3 ieee8021serviceselectorvalueornone read-only
Service Selector identifier to which the MP is attached, or 0, if none. If the MA is associated with more than one Service Selectors Identifiers, the ieee8021CfmVlanTable lists them.
                     ieee8021CfmMaCompMhfCreation 1.3.111.2.802.1.1.8.1.6.4.1.4 dot1agcfmmhfcreation read-only
Indicates if the Management entity can create MHFs (MIP Half Function) for this MA.
                     ieee8021CfmMaCompIdPermission 1.3.111.2.802.1.1.8.1.6.4.1.5 dot1agcfmidpermission read-only
Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this MA.
                     ieee8021CfmMaCompNumberOfVids 1.3.111.2.802.1.1.8.1.6.4.1.6 unsigned32 read-only
The number of VIDs associated with the MA.
                     ieee8021CfmMaCompRowStatus 1.3.111.2.802.1.1.8.1.6.4.1.7 rowstatus read-only
The status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated.
             ieee8021CfmComplianceV2 1.3.111.2.802.1.1.8.2.1.2
The compliance statement for support of the CFM MIB module.
             dot1agCfmWithPbbTeCompliance 1.3.111.2.802.1.1.8.2.1.3
The compliance statement for support of the CFM MIB for systems that support PBB-TE.
             ieee8021CfmStackGroup 1.3.111.2.802.1.1.8.2.2.12
Objects for the Stack group.
             ieee8021CfmMaGroup 1.3.111.2.802.1.1.8.2.2.13
Objects for the MA group.
             ieee8021CfmDefaultMdGroup 1.3.111.2.802.1.1.8.2.2.14
Objects for the Default MD Level group.
             ieee8021CfmVlanIdGroup 1.3.111.2.802.1.1.8.2.2.15
Objects for the VLAN ID group.
             ieee8021CfmConfigErrorListGroup 1.3.111.2.802.1.1.8.2.2.16
Objects for the CFM Configuration Error List Group.