IBMESCON-MIB: View SNMP OID List / Download MIB

VENDOR: IBM


 Home MIB: IBMESCON-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ibm 1.3.6.1.4.1.2
     ibmArchitecture 1.3.6.1.4.1.2.5
         ibmESCON 1.3.6.1.4.1.2.5.17
               esconPortData 1.3.6.1.4.1.2.5.17.1
                   esconPortTable 1.3.6.1.4.1.2.5.17.1.1 no-access
Table of objects that describe an ESCON channel port.
                       esconPortEntry 1.3.6.1.4.1.2.5.17.1.1.1 no-access
Table of objects that describe an ESCON channel port. This table is indexed by ifIndex from MIB-II.
                           esconPortControlUnitLinkAddress 1.3.6.1.4.1.2.5.17.1.1.1.1 octet string read-only
This address identifies the ESCON Director port to which the optical fiber from the ESCON device is attached.
                           esconPortInFiberStatus 1.3.6.1.4.1.2.5.17.1.1.1.2 integer read-only
Status of the fiber into this device from the host: inLoff = the light is off on the fiber into this device from the host inOls = the fiber into this device from the host is in an intermediate state between light-off and light-on inIdle = the fiber into this device from the host is in the light-on state, and is ready to transfer data from the host to this device inUnknown = the agent cannot determine the status of the fiber into this device from the host Enumeration: 'inIdle': 3, 'inOls': 2, 'inLoff': 1, 'inUnknown': 4.
                           esconPortOutFiberStatus 1.3.6.1.4.1.2.5.17.1.1.1.3 integer read-only
Status of the fiber out of this device to the host: outDisableReq = out disable obtained; the fiber out of this device into the host is not in the light-on state outDisableForced = out ESCON emits OLS; the fiber out of this device into the host is not in the light-on state outLoffForced = out ESCON forced light-off; the fiber out of this device into the host is not in the light-on state outOls = the fiber out of this device into the host is in an intermediate state between light-off and light-on outOlsforced = out ESCON forced OLS; the fiber out of this device into the host is not in the light-on state outEnable = the fiber out of this device into the host is in the light-on state, and is ready to transfer data from this device to the host outError = the status of the fiber out of this device to the host is none of those listed above. This is a state that should not occur Enumeration: 'outOls': 4, 'outOlsForced': 5, 'outEnable': 6, 'outDisableForced': 2, 'outError': 7, 'outLoffForced': 3, 'outDisableReq': 1.
               esconLinkData 1.3.6.1.4.1.2.5.17.2
                   esconLinkTable 1.3.6.1.4.1.2.5.17.2.1 no-access
Table of objects that describe an ESCON channel link.
                       esconLinkEntry 1.3.6.1.4.1.2.5.17.2.1.1 no-access
Table of objects that describe an ESCON channel link. This table is indexed by ifIndex from MIB-II, by host link address, and by (host) partition number.
                           esconLinkHostLinkAddress 1.3.6.1.4.1.2.5.17.2.1.1.1 octet string no-access
This address identifies the ESCON Director port to which the optical fiber between the ESCON Director and the host is attached.
                           esconLinkPartitionNumber 1.3.6.1.4.1.2.5.17.2.1.1.2 octet string no-access
A number identifying a logical host within an actual host.
                           esconLinkStatus 1.3.6.1.4.1.2.5.17.2.1.1.3 integer read-only
Gives the status of the link: hlpNotEstab = Host Logical Path not established hlpEstab = Host Logical Path established hlpError = Host Logical Path error Enumeration: 'hlpNotEstab': 1, 'hlpEstab': 2, 'hlpError': 3.
               esconStationData 1.3.6.1.4.1.2.5.17.3
                   esconStationTable 1.3.6.1.4.1.2.5.17.3.1 no-access
Table of objects that describe an ESCON channel station.
                       esconStationEntry 1.3.6.1.4.1.2.5.17.3.1.1 no-access
Table of objects that describe an ESCON channel station. This table is indexed by ifIndex from MIB-II, by host link address, by (host) partition number, and by ESCON device address.
                           esconStationHostLinkAddress 1.3.6.1.4.1.2.5.17.3.1.1.1 octet string no-access
This address identifies the ESCON Director port to which the optical fiber between the ESCON Director and the host is attached.
                           esconStationPartitionNumber 1.3.6.1.4.1.2.5.17.3.1.1.2 octet string no-access
A number identifying a logical host within an actual host.
                           esconStationDeviceAddress 1.3.6.1.4.1.2.5.17.3.1.1.3 octet string no-access
A unique hexadecimal number allocated to each station on the same host link.
                           esconStationState 1.3.6.1.4.1.2.5.17.3.1.1.4 integer read-only
The current state of the station. Enumeration: 'cldpError': 9, 'cpXidExpected': 14, 'cldpDefinedl': 8, 'deleted': 13, 'cldpLoad': 10, 'cpDefined': 2, 'cpActive': 4, 'cpDelete': 5, 'idle': 1, 'deletePending': 12, 'cpAbend': 6, 'cldpWait': 7, 'cpReset': 3, 'cldpDump': 11.
                           esconStationAttentionDelay 1.3.6.1.4.1.2.5.17.3.1.1.5 integer read-write
Specifies the amount of time in seconds that elapses from the receipt of a packet at an ESCON station (when no other packets are queued) before that station sends buffered data to the Host. An update to this object takes effect the next time the station establishes communications with the host.
                           esconStationAttentionTimeOut 1.3.6.1.4.1.2.5.17.3.1.1.6 integer read-write
Specifies the amount of time in seconds that the station is to wait for a response to an attention signal it sent to the host before initiating channel disconnect. An update to this object takes effect the next time the station establishes communications with the host.
                           esconStationMaxBfru 1.3.6.1.4.1.2.5.17.3.1.1.7 integer read-only
Number of buffers in the host buffer pool for receiving data from this station.
                           esconStationUnitSize 1.3.6.1.4.1.2.5.17.3.1.1.8 integer read-only
Maximum size of a buffer, in bytes, that the host can receive from this station.
                           esconStationMaxMsgSizeReceived 1.3.6.1.4.1.2.5.17.3.1.1.9 integer read-write
The maximum length of a message that can be received on this station. An update to this object takes effect the next time the station establishes communications with the host.
                           esconStationMaxMsgSizeSent 1.3.6.1.4.1.2.5.17.3.1.1.10 integer read-write
The maximum length of a message that can be sent from this station to the host. An update to this object takes effect the next time the station establishes communications with the host.
                           esconStationDataPacketsOkReceived 1.3.6.1.4.1.2.5.17.3.1.1.11 counter32 read-only
The number of data packets received from the host by this station without Data Check.
                           esconStationDataPacketsKoReceived 1.3.6.1.4.1.2.5.17.3.1.1.12 counter32 read-only
The number of data packets received from the host by this station with Data Check.
                           esconStationDataPacketsSent 1.3.6.1.4.1.2.5.17.3.1.1.13 counter32 read-only
The number of data packets sent to the host by this station.
                           esconStationTotalFramesSent 1.3.6.1.4.1.2.5.17.3.1.1.14 counter32 read-only
The number of data packets and control packets sent to the host by this station.
                           esconStationDataPacketsRetransmitted 1.3.6.1.4.1.2.5.17.3.1.1.15 counter32 read-only
The number of data packets retransmitted by this station
                           esconStationPositiveAckDataPackets 1.3.6.1.4.1.2.5.17.3.1.1.16 counter32 read-only
The number of data packets sent by this station to the host that the host has positively acknowledged. When the host sends a positive acknowledgement for a group of n data packets, this counter is incremented by n.
                           esconStationSecondChanceAttentions 1.3.6.1.4.1.2.5.17.3.1.1.17 counter32 read-only
The number of times this station has sent a Second Chance Attention signal to the host.
                           esconStationCommandsRetried 1.3.6.1.4.1.2.5.17.3.1.1.18 counter32 read-only
The number of times a command has been retried on this station
               esconConformance 1.3.6.1.4.1.2.5.17.4
                   esconMibCompliances 1.3.6.1.4.1.2.5.17.4.1
                       esconMibCompliance 1.3.6.1.4.1.2.5.17.4.1.1
                   esconMibGroups 1.3.6.1.4.1.2.5.17.4.2
                       esconPortGroup 1.3.6.1.4.1.2.5.17.4.2.1
                       esconLinkGroup 1.3.6.1.4.1.2.5.17.4.2.2
                       esconStationGroup 1.3.6.1.4.1.2.5.17.4.2.3