HYTERA-REPEATER-MIB: View SNMP OID List / Download MIB

VENDOR: HYTERA COMMUNICATIONS


 Home MIB: HYTERA-REPEATER-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hyteraRepeaterMIB 1.3.6.1.4.1.40297
             product 1.3.6.1.4.1.40297.1
                 repeater 1.3.6.1.4.1.40297.1.2
                     rptRealTimeInfo 1.3.6.1.4.1.40297.1.2.1
                         rptAlarmInfo 1.3.6.1.4.1.40297.1.2.1.1
                             rptVoltageAlarm 1.3.6.1.4.1.40297.1.2.1.1.1 integer read-only
The voltage alarm. normal(0), low voltage alarm(1), high voltage alarm(2), abnormal(3). The abnormal condition is used for RD960. For the RD960 do not distinguish low voltage alarm and high voltage alarm, we use abnormal to replace them.
                             rptTemperatureAlarm 1.3.6.1.4.1.40297.1.2.1.1.2 integer read-only
The temperature alarm. normal(0), low temperature alarm(1), high temperature alarm(2).
                             rptFanAlarm 1.3.6.1.4.1.40297.1.2.1.1.3 integer read-only
The fan alarm. normal(0), alarm(1). The object is not supported yet.
                             rptForwardAlarm 1.3.6.1.4.1.40297.1.2.1.1.4 integer read-only
The forward power alarm. undefined(-1), normal(0), alarm(1). The object is not supported yet.
                             rptReflectedAlarm 1.3.6.1.4.1.40297.1.2.1.1.5 integer read-only
The reflected power alarm. undefined(-1), normal(0), alarm(1). The object is not supported yet.
                             rptVswrAlarm 1.3.6.1.4.1.40297.1.2.1.1.6 integer read-only
The voltage standing wave radio alarm. normal(0), alarm(1).
                             rptTxPllAlarm 1.3.6.1.4.1.40297.1.2.1.1.7 integer read-only
The transmitting PLL alarm. normal(0), alarm(1).
                             rptRxPllAlarm 1.3.6.1.4.1.40297.1.2.1.1.8 integer read-only
The receiving PLL alarm. normal(0), alarm(1).
                             rptBatteryVoltageAlarm 1.3.6.1.4.1.40297.1.2.1.1.9 integer read-only
The battery voltage alarm. normal(0), abnormal(1).
                         rptDataInfo 1.3.6.1.4.1.40297.1.2.1.2
                             rptVoltage 1.3.6.1.4.1.40297.1.2.1.2.1 octet string read-only
The voltage. It should be changed to float format. If the repeater is rd620 and rd960, the value is invalid.
                             rptPaTemprature 1.3.6.1.4.1.40297.1.2.1.2.2 octet string read-only
The temperature. It should be changed to float format. The value is invalid, if the repeater is rd960.
                             rptFanSpeed 1.3.6.1.4.1.40297.1.2.1.2.3 integer read-only
The fan speed. The object is not supported yet.
                             rptVswr 1.3.6.1.4.1.40297.1.2.1.2.4 octet string read-only
The VSWR. It should be changed to float format.
                             rptTxFwdPower 1.3.6.1.4.1.40297.1.2.1.2.5 octet string read-only
The forward power. It should be changed to float format. The value is invalid, if the repeater is rd960 or rd620.
                             rptTxRefPower 1.3.6.1.4.1.40297.1.2.1.2.6 octet string read-only
The reflected power. It should be changed to float format. The value is invalid, if the repeater is rd960 or rd620.
                             rptDataInfoBak1 1.3.6.1.4.1.40297.1.2.1.2.7 octet string read-only
The backup object. The object is not supported yet.
                             rptDataInfoBak2 1.3.6.1.4.1.40297.1.2.1.2.8 octet string read-only
The backup object. The object is not supported yet.
                             rptSlot1Rssi 1.3.6.1.4.1.40297.1.2.1.2.9 integer read-only
The RSSI value of slot1. unit: dB.
                             rptSlot2Rssi 1.3.6.1.4.1.40297.1.2.1.2.10 integer read-only
The RSSI value of slot2. unit: dB. The value is valid only in digital model.
                             rptSupplyPowerType 1.3.6.1.4.1.40297.1.2.1.2.11 integer read-only
The type of power. DC(0), Battery(1).
                             rptBatteryConnect 1.3.6.1.4.1.40297.1.2.1.2.12 integer read-only
The battery connecting condition. disconnected(0), connected(1).
                             rptBatteryVoltage 1.3.6.1.4.1.40297.1.2.1.2.13 octet string read-only
The battery voltage. The object is not supported yet.
                     rptControl 1.3.6.1.4.1.40297.1.2.2
                         rptRestart 1.3.6.1.4.1.40297.1.2.2.1 integer read-write
Restart the repeater. do nothing(0), reset(1).
                         rptChannelNumber 1.3.6.1.4.1.40297.1.2.2.2 integer read-write
The current channel number in the zone.
                         rptChannelType 1.3.6.1.4.1.40297.1.2.2.3 integer read-only
The current channel type. digital(0), analog(1), mixed(2).
                         rptControlObjBak1 1.3.6.1.4.1.40297.1.2.2.4 integer read-only
The backup object. The object is not supported yet.
                         rptTxPowerLevel 1.3.6.1.4.1.40297.1.2.2.5 integer read-write
The transmit power level. high(0), low(2).
                         rptKnockdown 1.3.6.1.4.1.40297.1.2.2.6 integer read-write
The status of repeating. repeating(0), knockdown(1).
                         rptRadioState 1.3.6.1.4.1.40297.1.2.2.7 integer read-write
The status of the repeater's normal function. enable(0), disable(1).
                         rptSnmpTrapIp 1.3.6.1.4.1.40297.1.2.2.8 ipaddress read-write
The SNMP trapping IP address. The default value is 230.37.0.0.
                         rptSnmpTrapPort 1.3.6.1.4.1.40297.1.2.2.9 integer read-only
The SNMP trapping port.
                         rptchannelParaTable 1.3.6.1.4.1.40297.1.2.2.10 no-access
The table of channel's parameters relevant to the repeater's channels.
                               channelParaEntry 1.3.6.1.4.1.40297.1.2.2.10.1 no-access
The channel's parameters for one of the repeater's channels.
                                   channelParaIndex 1.3.6.1.4.1.40297.1.2.2.10.1.1 integer read-only
The index of the table which uniquely identifies the channel's parameters.
                                   actChannelAlias 1.3.6.1.4.1.40297.1.2.2.10.1.2 octet string read-only
The channel alias. It is an unicode string
                                   actChannelType 1.3.6.1.4.1.40297.1.2.2.10.1.3 integer read-only
The channel type. digital(0), analog(1), mixed(2).
                                   actTxPower 1.3.6.1.4.1.40297.1.2.2.10.1.4 integer read-only
The transmit power level. high(0), low(2).
                                   actChannelNo 1.3.6.1.4.1.40297.1.2.2.10.1.5 integer read-only
The channel number in the repeater's zone.
                                   actChannelSubNo 1.3.6.1.4.1.40297.1.2.2.10.1.6 integer read-only
The channel number in the group of same type.
                         rptForbid 1.3.6.1.4.1.40297.1.2.2.11 integer read-write
The status of the repeater's all function. nomal(0), forbid(1). If the repeater is forbided, you can only wake up it by setting the rptRadioStatus object to 0 in local RDAC model.
                     rptLog 1.3.6.1.4.1.40297.1.2.3
                         logTable 1.3.6.1.4.1.40297.1.2.3.1 no-access
The table of alarm records.
                             logEntry 1.3.6.1.4.1.40297.1.2.3.1.1 no-access
The record's content.
                                 logIndex 1.3.6.1.4.1.40297.1.2.3.1.1.1 integer read-only
The index of the table which uniquely identifies the alram record.
                                 alarmName 1.3.6.1.4.1.40297.1.2.3.1.1.2 integer read-only
The alarm name. temperature alarm(0), fan alarm(1), vswr alarm(2), low forward power alarm(3), low voltage alarm(4), high voltage alarm(5), tx unlock alarm(6), rx unlock alarm(7), battery voltage alarm(8), invalid(65535).
                                 alarmStatus 1.3.6.1.4.1.40297.1.2.3.1.1.3 integer read-only
The alarm status. alarm recove(0), alarm happen(1), invalid(65535).
                                 logTime 1.3.6.1.4.1.40297.1.2.3.1.1.4 integer read-only
The alarm time. unit: second. The time is the time lapsed since the repeater starting up. If the value is -1, the record is invalid.
                         clearLog 1.3.6.1.4.1.40297.1.2.3.2 integer read-write
Clear the log. do nothing(0), clear log(0).
                         recordCount 1.3.6.1.4.1.40297.1.2.3.3 integer read-only
The number of records.
                         latestRecordPosition 1.3.6.1.4.1.40297.1.2.3.4 integer read-only
The row number of the latest record. If the value is 0, there is no valid record in the table.
                     rptSystemInfo 1.3.6.1.4.1.40297.1.2.4
                         rptModelName 1.3.6.1.4.1.40297.1.2.4.1 octet string read-only
The model name. It is an unicode string.
                         rptModelNo 1.3.6.1.4.1.40297.1.2.4.2 octet string read-only
The model number. It is an unicode string.
                         rptFirmwareVersion 1.3.6.1.4.1.40297.1.2.4.3 octet string read-only
The firmware version. It is an unicode string.
                         rptRcdbVersion 1.3.6.1.4.1.40297.1.2.4.4 octet string read-only
The RCDB version. It is an unicode string.
                         rptSerialNo 1.3.6.1.4.1.40297.1.2.4.5 octet string read-only
The serial number. It is an unicode string.
                         rptRadioAlias 1.3.6.1.4.1.40297.1.2.4.6 octet string read-only
The repeater alias. It is an unicode string.
                         rptRadioID 1.3.6.1.4.1.40297.1.2.4.7 integer read-only
The ID of the repeater.
                         rptCurChannelType 1.3.6.1.4.1.40297.1.2.4.8 integer read-only
The type of the wroking channel. digital(0), analog(1), mixed(2).
                         rptChannelName 1.3.6.1.4.1.40297.1.2.4.9 octet string read-only
The name of the current channel. It is an unicode string.
                         rptCurTxFreq 1.3.6.1.4.1.40297.1.2.4.10 integer read-only
The current transmitting frequency. unit: Hz.
                         rptCurRxFreq 1.3.6.1.4.1.40297.1.2.4.11 integer read-only
The current receiving frequency. unit: Hz.
                         rptWorkState 1.3.6.1.4.1.40297.1.2.4.12 integer read-only
The work status of the repeater. receive(0), transmit(1).
                         rptCurZoneAlias 1.3.6.1.4.1.40297.1.2.4.13 octet string read-only
The alias of the current zone. It is an unicode string.
                     rptConfiguration 1.3.6.1.4.1.40297.1.2.5
                         rptBasicSetting 1.3.6.1.4.1.40297.1.2.5.1
                             powerOn 1.3.6.1.4.1.40297.1.2.5.1.1
                                 designatedPowerOnChn 1.3.6.1.4.1.40297.1.2.5.1.1.1 integer read-write
Designate the power on channel. disable(0), enable(1).
                                 powerOnChannelNo 1.3.6.1.4.1.40297.1.2.5.1.1.2 integer read-write
The the power on channel number. invalid(65535).
                             microphone 1.3.6.1.4.1.40297.1.2.5.1.2
                                 internalMicGain 1.3.6.1.4.1.40297.1.2.5.1.2.1 integer read-write
The gain of the internal microphone. It is double of the real value.
                                 externalMicGain 1.3.6.1.4.1.40297.1.2.5.1.2.2 integer read-write
The gain of the external microphone. It is double of the real value.
                             multiCTCCDCTable 1.3.6.1.4.1.40297.1.2.5.1.3 no-access
The table of subaudio frequency.
                                 multiCTCCDCEntry 1.3.6.1.4.1.40297.1.2.5.1.3.1 no-access
The subaudio frequency.
                                     ctcssIndex 1.3.6.1.4.1.40297.1.2.5.1.3.1.1 integer read-only
The index of the table which uniquely identifies the subaudio frequency.
                                     txCtcssFrequency 1.3.6.1.4.1.40297.1.2.5.1.3.1.2 integer read-write
The transmitting subaudio frequency. The value is limitted to the range. The range is changed with the type: 0 (txCtcssType: none) 19~492 (txCtcssType: CDCSS or CDCSS invert) 670~2541 (txCtcssType: CTCSS) The value is 10 times of the real value when the type is CTCSS. The value in first row is unable to be set. It's not able to be set, unless the rxCtcssType in the same row is not none. It will be set to the matched minimum available value automatically, when the txCtcssType in the same row is changed.
                                     txCtcssType 1.3.6.1.4.1.40297.1.2.5.1.3.1.3 integer read-write
The type of the transmitting subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3). The value in first row is unable to be set. It's not able to be set, unless the rxCtcssType in the same row is not none.
                                     rxCtcssFrequency 1.3.6.1.4.1.40297.1.2.5.1.3.1.4 integer read-write
The receiving subaudio frequency. The value is limitted to the range and is not allowed to duplicate but 0. The range is changed with the type:0 0 (rxCtcssType: none) 19~492 (rxCtcssType: CDCSS or CDCSS invert) 670~2541 (rxCtcssType: CTCSS) The value is 10 times of the real value when the type is CTCSS. The value in first row is unable to be set. It will be set to the matched minimum available value automatically, when the rxCtcssType in the same row is changed.
                                     rxCtcssType 1.3.6.1.4.1.40297.1.2.5.1.3.1.5 integer read-write
The type of the receiving subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3). It must be set according to line sequence. The value in first row is unable to be set.
                             audioPriority 1.3.6.1.4.1.40297.1.2.5.1.4
                                 pathPriority 1.3.6.1.4.1.40297.1.2.5.1.4.1 integer read-write
The transmit path priority. PTT request(0), repeat request(1), first come first send(2).
                                 pttPriority 1.3.6.1.4.1.40297.1.2.5.1.4.2 integer read-write
The PTT priority. external PTT(0), front PTT(1), remote PTT(2), first come first send(3).
                             jitterBufferLenth 1.3.6.1.4.1.40297.1.2.5.1.5 integer read-write
The jitter buffer length.
                             analogCallHangTime 1.3.6.1.4.1.40297.1.2.5.1.6 integer read-write
The analog call hang time. unit: second.
                             repeatRequestPriority 1.3.6.1.4.1.40297.1.2.5.1.7 integer read-write
The repeat request priority. local repeating(0), IP connect repeating(1), first come first send(2).
                         rptDigitalChannelSetting 1.3.6.1.4.1.40297.1.2.5.2
                             digitalChnTable 1.3.6.1.4.1.40297.1.2.5.2.1 no-access
The table of digital channel's configuration parameters relevant to the repeater's digital channels.
                                 digitalChnEntry 1.3.6.1.4.1.40297.1.2.5.2.1.1 no-access
The digital channel's configuration parameters for one of the repeater's digital channels.
                                     digitalChnIndex 1.3.6.1.4.1.40297.1.2.5.2.1.1.1 integer read-only
The index of the table which uniquely identifies the digital channel's parameter. It also represents the channel number which is counted from 1.
                                     digitalColorCode 1.3.6.1.4.1.40297.1.2.5.2.1.1.2 integer read-write
The color code.
                                     digitalIpMultisiteConnect 1.3.6.1.4.1.40297.1.2.5.2.1.1.3 integer read-write
The multisite connecting based on network. None(0), slot1(1), slot2(2), slot1&slot2(3).
                                     digitalReceiveFrequency 1.3.6.1.4.1.40297.1.2.5.2.1.1.4 integer read-write
The receiving frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5.
                                     digitalTransmitFrequency 1.3.6.1.4.1.40297.1.2.5.2.1.1.5 integer read-write
The transmitting frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5.
                                     digitalTxContactName 1.3.6.1.4.1.40297.1.2.5.2.1.1.6 integer read-write
The row number of transmitting contact name. none(0), row number(1~512). The value is limmited by the number of rows in contact table.
                         rptAnalogChannelSetting 1.3.6.1.4.1.40297.1.2.5.3
                             analogChnTable 1.3.6.1.4.1.40297.1.2.5.3.1 no-access
The table of analog channel's configuration parameters relevant to the repeater's analog channels.
                                 analogChnEntry 1.3.6.1.4.1.40297.1.2.5.3.1.1 no-access
The analog channel's configuration parameters for one of the repeater's analog channels.
                                     analogChnIndex 1.3.6.1.4.1.40297.1.2.5.3.1.1.1 integer read-only
The index of the table which uniquely identifies the analog channel's parameters. It also represents the channel number which is counted from 1.
                                     analogCarrierSquelchLevel 1.3.6.1.4.1.40297.1.2.5.3.1.1.2 integer read-write
The carrier squelch level. open(0), normal(1), tight(2)
                                     analogMultiCtcCdc 1.3.6.1.4.1.40297.1.2.5.3.1.1.3 integer read-write
The multiCtcCdc control. disable(0), enable(1). It can't be set to enable until the analogRxCtcCdcType is not 0 and there is some valid data is multiCTCCDCTable.
                                     analogPreEmp 1.3.6.1.4.1.40297.1.2.5.3.1.1.4 integer read-write
The pre-emphasis control. disable(0), enable(1).
                                     analogScrambler 1.3.6.1.4.1.40297.1.2.5.3.1.1.5 integer read-write
The scrambler control. disable(0), enable(1).
                                     analogFlatAudio 1.3.6.1.4.1.40297.1.2.5.3.1.1.6 integer read-write
The flat audio control. disable(0), enable(1).
                                     analogReceiveFrequency 1.3.6.1.4.1.40297.1.2.5.3.1.1.7 integer read-write
The receiving frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5.
                                     analogRxCtcCdcType 1.3.6.1.4.1.40297.1.2.5.3.1.1.8 integer read-write
The type of receiving subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3).
                                     analogRxCtcss 1.3.6.1.4.1.40297.1.2.5.3.1.1.9 integer read-write
The value of receiving CTCSS. It's 10 times of the real value. 65535 is an invalid value. The value is restricted by analogRxCtcCdcType.
                                     analogRxCdcss 1.3.6.1.4.1.40297.1.2.5.3.1.1.10 integer read-write
The value of receiving CDCSS. 65535 is an invalid value. The value is restricted by analogRxCtcCdcType.
                                     analogTransmitFrequency 1.3.6.1.4.1.40297.1.2.5.3.1.1.11 integer read-write
The transmitting frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5.
                                     analogTxCtcCdcType 1.3.6.1.4.1.40297.1.2.5.3.1.1.12 integer read-write
The type of transmitting subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3).
                                     analogTxCtcss 1.3.6.1.4.1.40297.1.2.5.3.1.1.13 integer read-write
The value of transmitting CTCSS. It's 10 times of the real value. 65535 is an invalid value. The value is limited by analogTxCtcCdcType.
                                     analogTxCdcss 1.3.6.1.4.1.40297.1.2.5.3.1.1.14 integer read-write
The value of transmitting CDCSS. 65535 is an invalid value. The value is restricted by analogTxCtcCdcType.
                         rptMixedChannelSetting 1.3.6.1.4.1.40297.1.2.5.4
                             mixedChnTable 1.3.6.1.4.1.40297.1.2.5.4.1 no-access
The table of mixed channel's configuration parameters relevant to the repeater's mixed channels.
                                 mixedChnEntry 1.3.6.1.4.1.40297.1.2.5.4.1.1 no-access
The mixed channel's configuration parameters for one of the repeater's mixed channels.
                                     mixedChnIndex 1.3.6.1.4.1.40297.1.2.5.4.1.1.1 integer read-only
The index of the table which uniquely identifies the mixed channel's parameters. It also represents the channel number which is counted from 1.
                                     mixedCarrierSquelchLevel 1.3.6.1.4.1.40297.1.2.5.4.1.1.2 integer read-write
The carrier squelch level control. open(0), normal(1), tight(2).
                                     mixedTxContactName 1.3.6.1.4.1.40297.1.2.5.4.1.1.3 integer read-write
The row number of transmitting contact name. none(0), row number(1~512). The value is limited to the numbers of row in the contact table.
                                     mixedIpMultisiteConnect 1.3.6.1.4.1.40297.1.2.5.4.1.1.4 integer read-write
The multisite connecting based on network. none(0), slot1(1), slot 2(2), slot1&slot2(3).
                                     mixedColorCode 1.3.6.1.4.1.40297.1.2.5.4.1.1.5 integer read-write
The color code.
                                     mixedTxChannelType 1.3.6.1.4.1.40297.1.2.5.4.1.1.6 integer read-write
The type of transmitting channel. digital(0), analog(1).
                                     mixedPreEmp 1.3.6.1.4.1.40297.1.2.5.4.1.1.7 integer read-write
The pre-emphasis control. disable(0), enable(1).
                                     mixedScrambler 1.3.6.1.4.1.40297.1.2.5.4.1.1.8 integer read-write
The scrambler control. disable(0), enable(1).
                                     mixedFlatAudio 1.3.6.1.4.1.40297.1.2.5.4.1.1.9 integer read-write
The flat audio control. disable(0), enable(1).
                                     mixedMultiCtcCdc 1.3.6.1.4.1.40297.1.2.5.4.1.1.10 integer read-write
The multiCtcCdc control. disable(0), enable(1). It can't be set to enable until the mixedRxCtcCdcType is not 0 and there is some valid data in multiCTCCDC Table.
                                     mixedReceiveFrequency 1.3.6.1.4.1.40297.1.2.5.4.1.1.11 integer read-write
The receiving frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5.
                                     mixedRxCtcCdcType 1.3.6.1.4.1.40297.1.2.5.4.1.1.12 integer read-write
The type of receiving subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3).
                                     mixedRxCtcss 1.3.6.1.4.1.40297.1.2.5.4.1.1.13 integer read-write
The value of receiving CTCSS. It's 10 times of the real value. 65535 is an invalid value. The value is restricted by analogRxCtcCdcType.
                                     mixedRxCdcss 1.3.6.1.4.1.40297.1.2.5.4.1.1.14 integer read-write
The value of receiving CDCSS. 65535 is an invalid value. The value is restricted by analogRxCtcCdcType.
                                     mixedTransmitFrequency 1.3.6.1.4.1.40297.1.2.5.4.1.1.15 integer read-write
The transmitting frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5.
                                     mixedTxCtcCdcType 1.3.6.1.4.1.40297.1.2.5.4.1.1.16 integer read-write
The type of transmitting subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3).
                                     mixedTxCtcss 1.3.6.1.4.1.40297.1.2.5.4.1.1.17 integer read-write
The value of transmitting CTCSS. It's 10 times of the real value. 65535 is an invalid value. The value is restricted by analogTxCtcCdcType.
                                     mixedTxCdcss 1.3.6.1.4.1.40297.1.2.5.4.1.1.18 integer read-write
The value of transmitting CDCSS. 65535 is an invalid value. The value is restricted by analogTxCtcCdcType.
                         rptServiceSetting 1.3.6.1.4.1.40297.1.2.5.5
                             groupCallHangTime 1.3.6.1.4.1.40297.1.2.5.5.1 integer read-write
The group call hang time. unit: second. The value is 2 times of the real value and should not be greater than the value of sit.
                             privateCallHangTime 1.3.6.1.4.1.40297.1.2.5.5.2 integer read-write
The private call hang time. unit: second. The value is 2 times of the real value and should not be greater than the value of sit.
                             emergencyCallHangTime 1.3.6.1.4.1.40297.1.2.5.5.3 integer read-write
The emergency call hang time. unit: second. The value is 2 times of the real value and should not be greater than the value of sit.
                             sit 1.3.6.1.4.1.40297.1.2.5.5.4 integer read-write
The sit. unit: second. transmit always(0), the value of sit(2~120). The value is 2 times of the real value and should not be less than groupCallHangTime, privateCallHangTime and emergencyCallHangTime.
                             txPreambleDuration 1.3.6.1.4.1.40297.1.2.5.5.5 integer read-write
The preamble duration. unit: milisecond. The value is 1/60 times of the real value.
                             beaconTxMode 1.3.6.1.4.1.40297.1.2.5.5.6 integer read-write
The beacon transmit mode. local(0), network(1).
                             beaconDuration 1.3.6.1.4.1.40297.1.2.5.5.7 integer read-write
The beacon duration. unit: milisecond. disable(0), beacon duration(4~150). The value is 1/120 times of the real value
                             beaconInterval 1.3.6.1.4.1.40297.1.2.5.5.8 integer read-write
The beacon interval. unit: second.
                             multisiteAccessManagement 1.3.6.1.4.1.40297.1.2.5.5.9 integer read-write
The multisite access management control. disable(0), enable(1).
                             accessManagement 1.3.6.1.4.1.40297.1.2.5.5.10 integer read-write
The access management control. disable(0), enable(1).
                             multisiteAccessManageTable 1.3.6.1.4.1.40297.1.2.5.5.11 no-access
The table of multisite access management's parameters relevant to the multisite access management.
                                   multisiteAccessManageEntry 1.3.6.1.4.1.40297.1.2.5.5.11.1 no-access
The multisite management parameters.
                                       multisiteAccessManageIndex 1.3.6.1.4.1.40297.1.2.5.5.11.1.1 integer read-only
The index of the table which uniquely identifies the multisite access management's parameters.
                                       multisiteStartId 1.3.6.1.4.1.40297.1.2.5.5.11.1.2 integer read-write
The start ID. invalid record(0), start ID(1~16776415). It can't be set until multisiteAccessManagement is enable and the previous row is set. If it is set, the matched multisiteIdLength and multisiteAccessCallType will be set to 100 and 1 automaticly.
                                       multisiteIdLength 1.3.6.1.4.1.40297.1.2.5.5.11.1.3 integer read-write
The ID length. invalid(65535), ID length(1~255). It can't be set until the multisiteAccessManagement is enable and the matched multisiteStartId is set.
                                       multisiteAccessCallType 1.3.6.1.4.1.40297.1.2.5.5.11.1.4 integer read-write
The call type. private call(0), group call(1), invalid(65535). It can't be set until multisiteAccessManagement is enable.
                             contactTable 1.3.6.1.4.1.40297.1.2.5.5.12 no-access
The table of contacts. It is not allowed to add a new contact information.
                                   contactEntry 1.3.6.1.4.1.40297.1.2.5.5.12.1 no-access
The contact information.
                                       contactIndex 1.3.6.1.4.1.40297.1.2.5.5.12.1.1 integer read-only
The index of the table which uniquely identifies the contact information.
                                       callAlias 1.3.6.1.4.1.40297.1.2.5.5.12.1.2 octet string read-write
The call alias. It is an unicode string. The value should be exclusive.
                                       contactCallType 1.3.6.1.4.1.40297.1.2.5.5.12.1.3 integer read-write
The call type. private call(0), group call(1), all call(2), invalid(65535). If the contactCallType is all call, the matched callId will be set to 16777215 automatically. The number of all call contact must be less than 2.
                                       callId 1.3.6.1.4.1.40297.1.2.5.5.12.1.4 integer read-write
The call ID. invalid(0), call ID(1~16776415,16777215). The callId should be exclusive in the group of same call type.
                             accessManageTable 1.3.6.1.4.1.40297.1.2.5.5.13 no-access
The table of access management's parameters relevant to the access management.
                                   accessManageEntry 1.3.6.1.4.1.40297.1.2.5.5.13.1 no-access
The access management parameters.
                                       accessManageIndex 1.3.6.1.4.1.40297.1.2.5.5.13.1.1 integer read-only
The index of the table which uniquely identifies the access management's parameters.
                                       startId 1.3.6.1.4.1.40297.1.2.5.5.13.1.2 integer read-write
The start ID. invalid record(0), start ID(1~16776415). It can't be set until accessManagement is enable and the previous row is set. If it is set, the matched idLength will be set to 100 automaticly.
                                       idLength 1.3.6.1.4.1.40297.1.2.5.5.13.1.3 integer read-write
The ID length. invalid(65535), ID length(1~255). It can't be set until the accessManagement is enable and the matched startId is set.
                             repeatTOTTime 1.3.6.1.4.1.40297.1.2.5.5.14 integer read-only
The repeat TOT time. unit: second. The value is 1/5 times of the real value.
                             rerepeatTOTTime 1.3.6.1.4.1.40297.1.2.5.5.15 integer read-only
The rerepeat TOT time. unit: second.