HUAWEI-VDSL-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: HUAWEI-VDSL-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, SNMPv2-TC, VDSL-LINE-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
         hwVdslActualRate 1.3.6.1.2.1.10.97.1.1.2.1.65536 integer32 read-only
The actual rate of this Vtu.
         hwVdslCurrSnr 1.3.6.1.2.1.10.97.1.1.2.1.65537 integer32 read-only
Current Signal to Noise Ratio.
         hwVdslMse 1.3.6.1.2.1.10.97.1.1.2.1.65538 integer32 read-only
Minimum Square Error.
         hwVdslChipHrdVer 1.3.6.1.2.1.10.97.1.1.2.1.65539 integer32 read-only
VDSL chip hardware version VDSL
         hwVdslChipSftVer 1.3.6.1.2.1.10.97.1.1.2.1.65540 integer32 read-only
VDSL chip software version
         hwVdslChipPatchVer 1.3.6.1.2.1.10.97.1.1.2.1.65541 integer32 read-only
VDSL chip patch version
           hwVdslLineConfAutoTrain 1.3.6.1.2.1.10.97.1.1.11.1.65536 integer read-write
This object specifies if the modem is allowed to train automatically. Enumeration: 'disabled': 2, 'enabled': 1.
 hwVdslEtherStatsTable 1.3.6.1.2.1.10.97.1.1.65536 no-access
This table provides one row for each Vtu. Each row contains the ehternet statistic Parameters table for that Vtu.
             hwVdslEtherStatsEntry 1.3.6.1.2.1.10.97.1.1.65536.1 no-access
An entry in the hwVdslEtherStatsTable.
                 hwVdslEtherStatsAlignmentErrors 1.3.6.1.2.1.10.97.1.1.65536.1.1 counter32 read-only
The total number of frames received with alignment errors (an odd number of nibbles).
                 hwVdslEtherStatsSingleCollisionFrames 1.3.6.1.2.1.10.97.1.1.65536.1.2 counter32 read-only
A count of successfully transmitted frames for which transmission was inhibited by exactly one collision.
                 hwVdslEtherStatsMultipleCollisionFrames 1.3.6.1.2.1.10.97.1.1.65536.1.3 counter32 read-only
A count of successfully transmitted frames for which transmission was inhibited by more than one collision.
                 hwVdslEtherStatsDeferredTransmissions 1.3.6.1.2.1.10.97.1.1.65536.1.4 counter32 read-only
A count of frames for which the first transmission attempt was delayed because the Ethernet media was busy.
                 hwVdslEtherStatsLateCollisionFrames 1.3.6.1.2.1.10.97.1.1.65536.1.5 counter32 read-only
The total number of times that a collision was detected on a particular interface later than 512 bit-times into the transmission of a packet.
                 hwVdslEtherStatsExcessiveCollisionFrames 1.3.6.1.2.1.10.97.1.1.65536.1.6 counter32 read-only
A count of frames for which transmission failed due to excessive collisions.
                 hwVdslEtherStatsReceiveErrors 1.3.6.1.2.1.10.97.1.1.65536.1.7 counter32 read-only
The total number of frames received with less than 64 bytes.
                 hwVdslEtherStatsCarrierErrors 1.3.6.1.2.1.10.97.1.1.65536.1.8 counter32 read-only
The total number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface.
                 hwVdslEtherStatsTooLongErrors 1.3.6.1.2.1.10.97.1.1.65536.1.9 counter32 read-only
The total number of frames received with more than maximum length.
                 hwVdslEtherStatsSequenceErrors 1.3.6.1.2.1.10.97.1.1.65536.1.10 counter32 read-only
The total number of frames received that had a bad Frame Check Sequence (FCS).
                 hwVdslEtherStatsTransmitOctets 1.3.6.1.2.1.10.97.1.1.65536.1.11 counter32 read-only
A count of data and padding octets of frames that are successfully transmitted.
                 hwVdslEtherStatsReceiveOctets 1.3.6.1.2.1.10.97.1.1.65536.1.12 counter32 read-only
A count of data and padding octets of frames that are successfully received.
                 hwVdslEtherStatsReceiveBroadcastFrames 1.3.6.1.2.1.10.97.1.1.65536.1.13 counter32 read-only
A count of frames that are successfully received and are directed to the broadcast group address.
                 hwVdslEtherStatsReceivePauseFrames 1.3.6.1.2.1.10.97.1.1.65536.1.14 counter32 read-only
The total number of PAUSE packets received.
                 hwVdslEtherStatsTransmitPauseFrames 1.3.6.1.2.1.10.97.1.1.65536.1.15 counter32 read-only
The total number of PAUSE packets transmitted.
                 hwVdslEtherStatsTransmitFrames 1.3.6.1.2.1.10.97.1.1.65536.1.16 counter32 read-only
The total number of valid data frames that have been transferred over the transmit channel.
                 hwVdslEtherStatsReceiveFrames 1.3.6.1.2.1.10.97.1.1.65536.1.17 counter32 read-only
The total number of valid data frames that have been transferred over the receive channel.