HUAWEI-SEP-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-SEP-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, P-BRIDGE-MIB, HUAWEI-MIB, Q-BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwSepMIB 1.3.6.1.4.1.2011.5.25.223
The private mib file includes the general extent information of the device.hwDatacomm(165).hwSepMIB.
         hwSepObjects 1.3.6.1.4.1.2011.5.25.223.1
             hwSepResetPktCnt 1.3.6.1.4.1.2011.5.25.223.1.1 integer read-write
Reset the packet counter of all running SEP ports. The value of hwSepResetPktCnt is unused(65535) when it is read. The value of hwSepResetPktCnt must be clear(1) when it is set. Enumeration: 'unused': 65535, 'clear': 1.
             hwSepSegmentTable 1.3.6.1.4.1.2011.5.25.223.1.2 no-access
The table includes the information of SEP segments.
                 hwSepSegmentEntry 1.3.6.1.4.1.2011.5.25.223.1.2.1 no-access
The table includes the information of SEP segments. The index of the table is SEP segment id.
                     hwSepSegmentId 1.3.6.1.4.1.2011.5.25.223.1.2.1.1 integer32 no-access
SEP segment Identifier.
                     hwSepControlVlanId 1.3.6.1.4.1.2011.5.25.223.1.2.1.2 integer32 read-only
The control VLAN identifier of the SEP segment. If the value of the object is set 0, the operation is delete configuration.
                     hwSepPreemptManual 1.3.6.1.4.1.2011.5.25.223.1.2.1.3 integer32 read-only
Trigger the manual preemption by setting the object to be 1. When getting the object it will always be 0.
                     hwSepPreemptDelay 1.3.6.1.4.1.2011.5.25.223.1.2.1.4 integer32 read-only
The preemption delay timer of the SEP segment. If the value of the object is set 0, the operation is delete configuration.
                     hwSepBlockPortMode 1.3.6.1.4.1.2011.5.25.223.1.2.1.5 integer read-only
The way to choose the port to be blocked. if the value of the object is set 1, the optimal port. if the value of the object is set 2, the middle port. if the value of the object is set 3, the port with the designated hop(hwSepBlockPortHop). if the value of the object is set 4, the port with the designated system name(hwSepBlockPortSysname) and port name(hwSepBlockPortIfname). if the value of the object is set 5, the operation is delete configuration of the block port. BlockPortMode | BlockPortValue | active inactive -----------------------|------------------------------------------------------------------------------ optimal(1) | (1) (2/3/4) middle(2) | (2) (1/3/4) hop(3) | (3)(hwSepBlockPortHop) (1/2/4) name(4) | (4)(hwSepBlockPortSysname & hwSepBlockPortIfname) (1/2/3) Enumeration: 'optimal': 1, 'null': 5, 'name': 4, 'hop': 3, 'middle': 2.
                     hwSepBlockPortHop 1.3.6.1.4.1.2011.5.25.223.1.2.1.6 integer32 read-only
The hop count of the preffered blocking port. If the value of the object is set 0, the operation is delete configuration. If the mode of block port is not hop(3), the value is not have effect.
                     hwSepBlockPortSysname 1.3.6.1.4.1.2011.5.25.223.1.2.1.7 octet string read-only
The system name of the preffered blocking port. if not set the value of hwSepBlockPortIfname, this configuration is not take effect. if the mode of block port is not name(4), this configuration is not task effect.
                     hwSepBlockPortIfname 1.3.6.1.4.1.2011.5.25.223.1.2.1.8 octet string read-only
The interface name of the preffered blocking port. if not set the value of hwSepBlockPortSysname, this configuration is not take effect. if the mode of block port is not name(4), this configuration is not take effect.
                     hwSepTcNotifySep 1.3.6.1.4.1.2011.5.25.223.1.2.1.9 octet string read-only
The bitmap of the SEP segments to which the topology change event will be notified
                     hwSepTcNotifyRrpp 1.3.6.1.4.1.2011.5.25.223.1.2.1.10 enabledstatus read-only
If set 1, the topology change event of the SEP segment will be notified to RRPP
                     hwSepTcNotifyStp 1.3.6.1.4.1.2011.5.25.223.1.2.1.11 enabledstatus read-only
If set 1, the topology change event of the SEP segment will be notified to STP
                     hwSepTcNotifyVpls 1.3.6.1.4.1.2011.5.25.223.1.2.1.12 enabledstatus read-only
If set 1, the topology change event of the SEP segment will be notified to VPLS
                     hwSepTcNotifyVll 1.3.6.1.4.1.2011.5.25.223.1.2.1.13 enabledstatus read-only
If set 1, the topology change event of the SEP segment will be notified to VLL
                     hwSepTcNotifySmartLinkCtrlVlan 1.3.6.1.4.1.2011.5.25.223.1.2.1.14 integer32 read-only
If set control vlan, the topology change event of the SEP segment will be notified to Smart-Link. If the value of the object is set 0, the operation is delete configuration.
                     hwSepDealSmartLinkFlush 1.3.6.1.4.1.2011.5.25.223.1.2.1.15 enabledstatus read-only
If set 1, the SEP segment will deal the smart link flush-FDB packet
                     hwSepProtectedInstanceList 1.3.6.1.4.1.2011.5.25.223.1.2.1.16 octet string read-only
The protected instance list of the SEP segment
                     hwSepTcProtectionInterval 1.3.6.1.4.1.2011.5.25.223.1.2.1.17 integer32 read-only
The interval of tc-protection, the default value is 2.
                     hwSepSegmentRowStatus 1.3.6.1.4.1.2011.5.25.223.1.2.1.128 rowstatus read-only
Operation of CreateAndGo can be used to create a new SEP segment, and operation of Destroy be used to destroy an existent SEP segment.
             hwSepTopologyTable 1.3.6.1.4.1.2011.5.25.223.1.3 no-access
The table includes the information of the topology of the SEP segment.
                 hwSepTopologyEntry 1.3.6.1.4.1.2011.5.25.223.1.3.1 no-access
The table includes the information of the topology of the SEP segment. The index of the table is the segment identifier and the hop count of the port.
                     hwSepHop 1.3.6.1.4.1.2011.5.25.223.1.3.1.1 integer32 no-access
The hop count of the port.
                     hwSepPortId 1.3.6.1.4.1.2011.5.25.223.1.3.1.2 octet string read-only
The port identifier. For example: 00.E0.6E.70.23.00.00.00 (hex). The first 6 bytes is the mac address of the device
                     hwSepTopoSysname 1.3.6.1.4.1.2011.5.25.223.1.3.1.3 octet string read-only
The system name.
                     hwSepTopoPortname 1.3.6.1.4.1.2011.5.25.223.1.3.1.4 octet string read-only
The port name.
                     hwSepTopoPortConfigPriority 1.3.6.1.4.1.2011.5.25.223.1.3.1.5 integer32 read-only
The configured port priority.The default value is 64.
                     hwSepTopoPortActivePriority 1.3.6.1.4.1.2011.5.25.223.1.3.1.6 integer32 read-only
The active port priority.
                     hwSepTopoConfigPortRole 1.3.6.1.4.1.2011.5.25.223.1.3.1.7 integer32 read-only
The configued port role: role value common 0x10 edge secondary 0x21 edge primary 0x22 no neighbor edge secondary 0x31 no neighbor edge primary 0x32
                     hwSepTopoActivePortRole 1.3.6.1.4.1.2011.5.25.223.1.3.1.8 integer32 read-only
The active port role: role value common 0x10 edge secondary 0x21 edge primary 0x22 no neighbor edge secondary 0x31 no neighbor edge primary 0x32
                     hwSepTopoPortNbrState 1.3.6.1.4.1.2011.5.25.223.1.3.1.9 integer read-only
The state of the neighbor state machine: state value down 1 init 2 preup 3 up 4 conflict 5 Enumeration: 'down': 1, 'preup': 3, 'init': 2, 'up': 4, 'conflict': 5.
                     hwSepTopoBrotherPortId 1.3.6.1.4.1.2011.5.25.223.1.3.1.10 octet string read-only
The brother port identifier. For example: 00.E0.6E.70.23.00.00.00 (hex). The first 6 bytes is the mac address of the device
                     hwSepTopoNbrPortId 1.3.6.1.4.1.2011.5.25.223.1.3.1.11 octet string read-only
The neighbor port identifier. For example: 00.E0.6E.70.23.00.00.00 (hex). The first 6 bytes is the mac address of the device
                     hwSepTopoPortLinkState 1.3.6.1.4.1.2011.5.25.223.1.3.1.12 integer read-only
The link state of the port: state value link down 1 link up 2 Enumeration: 'down': 1, 'up': 2.
                     hwSepTopoPortFwdState 1.3.6.1.4.1.2011.5.25.223.1.3.1.13 integer read-only
The forwarding state of the port: state value discarding 1 forwarding 2 Enumeration: 'discarding': 1, 'forwarding': 2.
             hwSepPortTable 1.3.6.1.4.1.2011.5.25.223.1.4 no-access
The table includes the information of SEP ports
                 hwSepPortEntry 1.3.6.1.4.1.2011.5.25.223.1.4.1 no-access
The table includes the information of SEP ports. The index of the table is SEP segment identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4. If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port. the other port identifier is for extension and not used currently, should be set 0.
                     hwSepPortType 1.3.6.1.4.1.2011.5.25.223.1.4.1.1 unsigned32 no-access
The port type.Currently SEP just support ethernet port and the value is 1.
                     hwSepPortId1 1.3.6.1.4.1.2011.5.25.223.1.4.1.2 unsigned32 no-access
The port identifier1, when the hwSepPortType is 1, the value of the object is the IfIndex of the port.
                     hwSepPortId2 1.3.6.1.4.1.2011.5.25.223.1.4.1.3 unsigned32 no-access
The port identifier2, Currently it is not used and only for extension, should be set 0.
                     hwSepPortId3 1.3.6.1.4.1.2011.5.25.223.1.4.1.4 unsigned32 no-access
The port identifier3, Currently it is not used and only for extension, should be set 0.
                     hwSepPortId4 1.3.6.1.4.1.2011.5.25.223.1.4.1.5 unsigned32 no-access
The port identifier4, Currently it is not used and only for extension, should be set 0.
                     hwSepSysname 1.3.6.1.4.1.2011.5.25.223.1.4.1.6 octet string read-only
The system name.
                     hwSepPortname 1.3.6.1.4.1.2011.5.25.223.1.4.1.7 octet string read-only
The port name
                     hwSepPortConfigPriority 1.3.6.1.4.1.2011.5.25.223.1.4.1.8 integer32 read-only
The configured port priority.The default value is 64.
                     hwSepPortActivePriority 1.3.6.1.4.1.2011.5.25.223.1.4.1.9 integer32 read-only
The active port priority.
                     hwSepConfigPortRole 1.3.6.1.4.1.2011.5.25.223.1.4.1.10 integer32 read-only
The configued port role: role value common 0x10 edge secondary 0x21 edge primary 0x22 no neighbor edge secondary 0x31 no neighbor edge primary 0x32
                     hwSepActivePortRole 1.3.6.1.4.1.2011.5.25.223.1.4.1.11 integer32 read-only
The active port role: role value common 0x10 edge secondary 0x21 edge primary 0x22 no neighbor edge secondary 0x31 no neighbor edge primary 0x32
                     hwSepPortNbrState 1.3.6.1.4.1.2011.5.25.223.1.4.1.12 integer read-only
The state of the neighbor state machine: state value down 1 init 2 preup 3 up 4 conflict 5 Enumeration: 'down': 1, 'preup': 3, 'init': 2, 'up': 4, 'conflict': 5.
                     hwSepNbrPortId 1.3.6.1.4.1.2011.5.25.223.1.4.1.13 octet string read-only
The identifier of the neighbor port. For example: 00.E0.6E.70.23.00.00.00 (hex)
                     hwSepPortFwdState 1.3.6.1.4.1.2011.5.25.223.1.4.1.14 integer read-only
The forwarding state of the port: state value discarding 1 forwarding 2 Enumeration: 'discarding': 1, 'forwarding': 2.
                     hwSepRxNbrPktCnt 1.3.6.1.4.1.2011.5.25.223.1.4.1.15 integer32 read-only
The number of received neighbor packets.
                     hwSepTxNbrPktCnt 1.3.6.1.4.1.2011.5.25.223.1.4.1.16 integer32 read-only
The number of transmited neighbor packets.
                     hwSepRxLsaInfoPktCnt 1.3.6.1.4.1.2011.5.25.223.1.4.1.17 integer32 read-only
The number of received LSA information packets.
                     hwSepTxLsaInfoPktCnt 1.3.6.1.4.1.2011.5.25.223.1.4.1.18 integer32 read-only
The number of transmitted LSA information packets.
                     hwSepRxLsaAckPktCnt 1.3.6.1.4.1.2011.5.25.223.1.4.1.19 integer32 read-only
The number of received LSA acknowledgement packets.
                     hwSepTxLsaAckPktCnt 1.3.6.1.4.1.2011.5.25.223.1.4.1.20 integer32 read-only
The number of transmitted LSA acknowledgement packets.
                     hwSepRxPreemptReqPktCnt 1.3.6.1.4.1.2011.5.25.223.1.4.1.21 integer32 read-only
The number of received preemption request packets.
                     hwSepTxPreemptReqPktCnt 1.3.6.1.4.1.2011.5.25.223.1.4.1.22 integer32 read-only
The number of transmitted preemption request packets.
                     hwSepRxPreemptAckPktCnt 1.3.6.1.4.1.2011.5.25.223.1.4.1.23 integer32 read-only
The number of received preemption acknowledgement packets.
                     hwSepTxPreemptAckPktCnt 1.3.6.1.4.1.2011.5.25.223.1.4.1.24 integer32 read-only
The number of transmitted preemption acknowledgement packets.
                     hwSepRxTcPktCnt 1.3.6.1.4.1.2011.5.25.223.1.4.1.25 integer32 read-only
The number of received topology change packets.
                     hwSepTxTcPktCnt 1.3.6.1.4.1.2011.5.25.223.1.4.1.26 integer32 read-only
The number of transmitted topology change packets.
                     hwSepRxEpaPktCnt 1.3.6.1.4.1.2011.5.25.223.1.4.1.27 integer32 read-only
The number of received topology change packets.
                     hwSepTxEpaPktCnt 1.3.6.1.4.1.2011.5.25.223.1.4.1.28 integer32 read-only
The number of transmitted topology change packets.
                     hwSepResetPortPktCnt 1.3.6.1.4.1.2011.5.25.223.1.4.1.29 integer read-write
Reset the packet counter of the port in the SEP segment. The value of hwSepResetPktCnt is unused(65535) when it is read. The value of hwSepResetPktCnt must be clear(1) when it is set. Enumeration: 'unused': 65535, 'clear': 1.
                     hwSepPortRowStatus 1.3.6.1.4.1.2011.5.25.223.1.4.1.128 rowstatus read-only
Operation of CreateAndGo can be used to have a port join the SEP segment. and operation of Destroy be used to have a port leave the SEP segment.
         hwSepGroups 1.3.6.1.4.1.2011.5.25.223.2
             hwSepGlobalInfoGroup 1.3.6.1.4.1.2011.5.25.223.2.1
The group of global information.
             hwSepSegmentInfoGroup 1.3.6.1.4.1.2011.5.25.223.2.2
The group of segment information.
             hwSepPortInfoGroup 1.3.6.1.4.1.2011.5.25.223.2.3
The group of port information.
             hwSepTopologyInfoGroup 1.3.6.1.4.1.2011.5.25.223.2.4
The group of topology information.