HUAWEI-L2MULTICAST-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-L2MULTICAST-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, P-BRIDGE-MIB, HUAWEI-MIB, Q-BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwL2MultiCastMIB 1.3.6.1.4.1.2011.5.25.181
The MIB module for IGMP Snooping feature. Internet Group Management Protocol (IGMP) is the protocol used by IPv4 end hosts to indicate their interest in receiving multicast traffic for certain multicast groups to neighboring multicast routers. IGMP Snooping is a switch protocol. A switch that implements IGMP Snooping listens to the IGMP messages exchanged between the hosts and router, then provides selective transmission of multicast traffic based on multicast mac destination address or multicast group address.
         hwIgspMibObject 1.3.6.1.4.1.2011.5.25.181.1
             hwIgspSystemInfo 1.3.6.1.4.1.2011.5.25.181.1.1
                 hwIgmpSnoopingEnabled 1.3.6.1.4.1.2011.5.25.181.1.1.1 enabledstatus read-write
IGMP snooping is enabled or disabled in the global view: 1: enabled 2: disabled The default value is 2.
                 hwSendQueryEnabled 1.3.6.1.4.1.2011.5.25.181.1.1.2 enabledstatus read-write
The sending of query packets is enabled or disabled: 1: enabled 2: disabled The default value is 2. Note: Ensure that you query and configure this object after hwIgmpSnoopingEnabled is configured.
                 hwSendQuerySourceIpAddr 1.3.6.1.4.1.2011.5.25.181.1.1.3 ipaddress read-write
The source IP addresses of the Query messages sent by a device. The value ranges from 0.0.0.1 to 223.255.255.255. The default value is 192.168.0.1.
                 hwL2mcCacTrapInterval 1.3.6.1.4.1.2011.5.25.181.1.1.4 integer32 read-write
The CAC trap interval. The default is zero.
             hwL2mcCfgInfo 1.3.6.1.4.1.2011.5.25.181.1.2
                 hwL2mcCfgTable 1.3.6.1.4.1.2011.5.25.181.1.2.1 no-access
This table describes the configurations of IGMP snooping in a VLAN or a VSI.
                     hwL2mcCfgEntry 1.3.6.1.4.1.2011.5.25.181.1.2.1.1 no-access
An entry is created for each active VLAN or VSI in the device and deleted when the VLAN or VSI becomes inactive.
                         hwL2mcVlanIndex 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.1 vlanidorany no-access
The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
                         hwL2mcVsiName 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.2 displaystring no-access
The name of a VSI. If a VLAN is specified, the value is 0.
                         hwL2mcEnabled 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.3 enabledstatus read-only
Whether IGMP snooping is enabled in a VLAN or a VSI: 1:enabled 2:disabled The default value is 2.
                         hwL2mcRouterAgingTime 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.4 integer32 read-only
The aging time of an interface on a router. The value ranges from 1 to 1000, in seconds. The default value is 180, which router port is created by Igmp Query message. And when it is created by PIM hello messge, the default value is the time of Holdtime in the message.
                         hwL2mcMaxQueryRespTime 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.5 integer32 read-only
The maximum response time. The value ranges from 1 to 25, in seconds. The default value is 10, in seconds.
                         hwL2mcLastMemQueryInterval 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.6 integer32 read-only
The last member query interval. The value ranges from 1 to 5, in seconds. The default value is 1, in seconds.
                         hwL2mcQueryInterval 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.7 integer32 read-only
The query interval. The value ranges from 1 to 65535, in seconds. The default value is 60, in seconds.
                         hwL2mcRobustCount 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.8 integer32 read-only
The robustness variable. The value ranges from 2 to 5. The default value is 2.
                         hwL2mcCheckRouterAlert 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.9 truthvalue read-only
Whether to check the router-alert of a packet. The default value is False.
                         hwL2mcSendRouterAlert 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.10 truthvalue read-only
Whether to send the router-alert of a packet. The default value is true.
                         hwL2mcIgmpVersion 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.11 integer read-only
The version of the IGMP packets. The value ranges from 1 to 3. The default value is 2. Enumeration: 'version1': 1, 'version2': 2, 'version3': 3.
                         hwL2mcFwdMode 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.12 integer read-only
The forwarding mode: 1: IP 2: MAC The default value is 1. Enumeration: 'ip': 1, 'mac': 2.
                         hwL2mcPromptLeaveEnable 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.13 enabledstatus read-only
Whether the prompt leave is enabled: 1: enabled 2: disabled The default value is 2.
                         hwL2mcPromptLeaveAclNum 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.14 integer32 read-only
Whether the prompt leave complies with the ACL rules. The ACL number can be set. The ACL number ranges from 2000 to 3999. The default value is 0, indicating that no ACL number is set.
                         hwL2mcRouterPortLearningEnable 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.15 enabledstatus read-only
Whether interface learning is enabled or not in a VLAN: 1: enabled 2: disabled The default value is 1.
                         hwL2mcReportSuppressEnable 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.16 enabledstatus read-only
Whether the suppression of the IGMP Report message (proxy) is enabled: 1: enabled 2: disabled The default value is 2.
                         hwL2mcIgmpQuerierEnable 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.17 enabledstatus read-only
Whether the querier is enabled: 1: enabled 2: disabled The default value is 2.
                         hwL2mcIgmpSsmMappingEnable 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.18 enabledstatus read-only
Whether Ssm-Mapping is enabled: 1: enabled 2: disabled The default value is 2.
                         hwL2mcSsmAclNum 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.19 integer32 read-only
That SSM complies with the ACL number. The ACL number ranges from 2000 to 2999. The default value is 0, indicating that no ACL number is set.
                         hwL2mcRowStatus 1.3.6.1.4.1.2011.5.25.181.1.2.1.1.100 rowstatus read-only
The row status.
             hwL2mcStatisticsInfo 1.3.6.1.4.1.2011.5.25.181.1.3
                 hwL2mcStatisticsTable 1.3.6.1.4.1.2011.5.25.181.1.3.1 no-access
Table contains VLAN or VSI statistics information for IGMP Snooping.
                     hwL2mcStatisticsEntry 1.3.6.1.4.1.2011.5.25.181.1.3.1.1 no-access
An entry is created for each active VLAN or VSI in the device and deleted when the VLAN or VSI becomes inactive.
                         hwL2mcStatsVlanIndex 1.3.6.1.4.1.2011.5.25.181.1.3.1.1.1 vlanidorany no-access
The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
                         hwL2mcStatsVsiName 1.3.6.1.4.1.2011.5.25.181.1.3.1.1.2 displaystring no-access
The name of a VSI. If a VLAN is specified, the value is 0.
                         hwL2mcRecvIgmpV1ReportNum 1.3.6.1.4.1.2011.5.25.181.1.3.1.1.3 counter32 read-only
The number of IGMPv1 Report messages received in a VLAN or a VSI.
                         hwL2mcRecvIgmpV2ReportNum 1.3.6.1.4.1.2011.5.25.181.1.3.1.1.4 counter32 read-only
The number of IGMPv2 Report messages received in a VLAN or a VSI.
                         hwL2mcRecvIgmpV3ReportNum 1.3.6.1.4.1.2011.5.25.181.1.3.1.1.5 counter32 read-only
The number of IGMPv3 Report messages received in a VLAN or a VSI.
                         hwL2mcRecvIgmpLeaveNum 1.3.6.1.4.1.2011.5.25.181.1.3.1.1.6 counter32 read-only
The number of IGMP Leave messages received in a VLAN or a VSI.
                         hwL2mcRecvIgmpV1QueryNum 1.3.6.1.4.1.2011.5.25.181.1.3.1.1.7 counter32 read-only
The number of IGMPv1 Query messages received in a VLAN or a VSI.
                         hwL2mcRecvIgmpV2QueryNum 1.3.6.1.4.1.2011.5.25.181.1.3.1.1.8 counter32 read-only
The number of IGMPv2 Query messages received in a VLAN or a VSI.
                         hwL2mcRecvIgmpV3QueryNum 1.3.6.1.4.1.2011.5.25.181.1.3.1.1.9 counter32 read-only
The number of IGMPv3 Query messages received in a VLAN or a VSI.
                         hwL2mcRecvPimHelloNum 1.3.6.1.4.1.2011.5.25.181.1.3.1.1.10 counter32 read-only
The number of PIM Hello messages received in a VLAN or a VSI.
                         hwL2mcSendQueryNum 1.3.6.1.4.1.2011.5.25.181.1.3.1.1.11 counter32 read-only
The number of IGMP Query messages (the source address is 0) in a VLAN or a VSI.
                         hwL2mcSendQuerySourceNum 1.3.6.1.4.1.2011.5.25.181.1.3.1.1.12 counter32 read-only
The number of IGMP Query messages (the source address is not 0) in a VLAN or a VSI.
                         hwL2mcProxyGenQueryNum 1.3.6.1.4.1.2011.5.25.181.1.3.1.1.13 counter32 read-only
The number of Query messages sent by the proxy in a VLAN or a VSI.
                         hwL2mcProxyGroupQueryNum 1.3.6.1.4.1.2011.5.25.181.1.3.1.1.14 counter32 read-only
The number of Query messages sent by the proxy in a VLAN or a VSI to a specified group.
                         hwL2mcProxyGroupSourceQueryNum 1.3.6.1.4.1.2011.5.25.181.1.3.1.1.15 counter32 read-only
The number of Query messages sent by the proxy in a VLAN or a VSI to a specified source group.
                         hwL2mcIgmpPacketClearStats 1.3.6.1.4.1.2011.5.25.181.1.3.1.1.30 truthvalue read-write
Whether to clear the statistics of IGMP snooping. If the value is 1, it indicates that the statistics need to be cleared.
             hwL2mcFwdInfo 1.3.6.1.4.1.2011.5.25.181.1.4
                 hwL2mcFwdTable 1.3.6.1.4.1.2011.5.25.181.1.4.1 no-access
Table contains l2 multicast forward information for IGMP Snooping.
                     hwL2mcFwdEntry 1.3.6.1.4.1.2011.5.25.181.1.4.1.1 no-access
An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when a forwarding table entry deleted.
                         hwL2mcFwdVlanIndex 1.3.6.1.4.1.2011.5.25.181.1.4.1.1.1 vlanidorany no-access
The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
                         hwL2mcFwdVsiName 1.3.6.1.4.1.2011.5.25.181.1.4.1.1.2 displaystring no-access
The name of a VSI. If a VLAN is specified, the value is 0.
                         hwL2mcFwdGroupAddress 1.3.6.1.4.1.2011.5.25.181.1.4.1.1.3 ipaddress no-access
The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses.
                         hwL2mcFwdSourceAddress 1.3.6.1.4.1.2011.5.25.181.1.4.1.1.4 ipaddress no-access
The source IP address of a multicast group.
                         hwL2mcFwdPortType 1.3.6.1.4.1.2011.5.25.181.1.4.1.1.5 hwporttype no-access
The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface
                         hwL2mcFwdPortIfIndex 1.3.6.1.4.1.2011.5.25.181.1.4.1.1.6 interfaceindexorzero no-access
The interface index. The value 0 indicates that the interface index is invalid.
                         hwL2mcFwdPortPeId 1.3.6.1.4.1.2011.5.25.181.1.4.1.1.7 vlanidorany no-access
The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
                         hwL2mcFwdPortCeId 1.3.6.1.4.1.2011.5.25.181.1.4.1.1.8 vlanidorany no-access
The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the CE VID is invalid.
                         hwL2mcFwdPeerAddress 1.3.6.1.4.1.2011.5.25.181.1.4.1.1.9 ipaddress no-access
The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.
                         hwL2mcFwdVcOrSiteId 1.3.6.1.4.1.2011.5.25.181.1.4.1.1.10 unsigned32 no-access
The VC ID or SITE ID of a PW interface.
                         hwL2mcFwdAddressType 1.3.6.1.4.1.2011.5.25.181.1.4.1.1.11 integer read-only
The address type of an entry: 1: IP 2: MAC The default value is 1. Enumeration: 'ip': 1, 'mac': 2.
                         hwL2mcFwdHostFlag1 1.3.6.1.4.1.2011.5.25.181.1.4.1.1.18 integer read-only
The mode to create an interface on the host: 1: static 2: dynamic 3: static and dynamic 4: invalid Enumeration: 'dynamic': 2, 'staticDynamic': 3, 'static': 1, 'invalid': 4.
                         hwL2mcFwdHostFlag2 1.3.6.1.4.1.2011.5.25.181.1.4.1.1.19 integer read-only
Whether an interface on the host is created through SSM-mapping: 1: non-mapping 2: mapping Enumeration: 'mapping': 2, 'nonMapping': 1.
                         hwL2mcFwdHostFlag3 1.3.6.1.4.1.2011.5.25.181.1.4.1.1.20 integer read-only
The type of an interface created on a router: 1: Interface connected to the host 2: Router interface that replicates multicast data flows Enumeration: 'router': 2, 'host': 1.
                         hwL2mcFwdHostFlag4 1.3.6.1.4.1.2011.5.25.181.1.4.1.1.21 integer read-only
Indicates (S, G) table created : 1: from port; 2: from static; 3: from both the default falue is 1 Enumeration: 'both': 3, 'static': 2, 'port': 1.
             hwL2mcGroupInfo 1.3.6.1.4.1.2011.5.25.181.1.5
                 hwL2mcGroupInfoTable 1.3.6.1.4.1.2011.5.25.181.1.5.1 no-access
Table contains l2 multicast group information for IGMP Snooping.
                     hwL2mcGroupInfoEntry 1.3.6.1.4.1.2011.5.25.181.1.5.1.1 no-access
An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when a forwarding table entry deleted.
                         hwL2mcGroupVlanIndex 1.3.6.1.4.1.2011.5.25.181.1.5.1.1.1 vlanidorany no-access
The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
                         hwL2mcGroupVsiName 1.3.6.1.4.1.2011.5.25.181.1.5.1.1.2 displaystring no-access
The name of a VSI. If a VLAN is specified, the value is 0.
                         hwL2mcGroupGroupAddress 1.3.6.1.4.1.2011.5.25.181.1.5.1.1.3 ipaddress no-access
The IP address of a multicast group.
                         hwL2mcGroupSourceAddress 1.3.6.1.4.1.2011.5.25.181.1.5.1.1.4 ipaddress no-access
The source IP address of a multicast group.
                         hwL2mcPortType 1.3.6.1.4.1.2011.5.25.181.1.5.1.1.5 hwporttype no-access
The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface
                         hwL2mcGroupPortIfIndex 1.3.6.1.4.1.2011.5.25.181.1.5.1.1.6 interfaceindexorzero no-access
The interface index. The value 0 indicates that the interface index is invalid.
                         hwL2mcGroupPortPeId 1.3.6.1.4.1.2011.5.25.181.1.5.1.1.7 vlanidorany no-access
The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
                         hwL2mcGroupPortCeId 1.3.6.1.4.1.2011.5.25.181.1.5.1.1.8 vlanidorany no-access
The CE VID of an interface. The value ranges from 1 to 4095. The value 0 indicates that the PE VID is invalid.
                         hwL2mcGroupPeerAddress 1.3.6.1.4.1.2011.5.25.181.1.5.1.1.9 ipaddress no-access
The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.
                         hwL2mcGroupVcOrSiteId 1.3.6.1.4.1.2011.5.25.181.1.5.1.1.10 unsigned32 no-access
The VC ID or SITE ID of a PW interface.
                         hwL2mcSourceUpTime 1.3.6.1.4.1.2011.5.25.181.1.5.1.1.14 counter32 read-only
How long the source group exists in the forwarding entry.
                         hwL2mcSourceExpires 1.3.6.1.4.1.2011.5.25.181.1.5.1.1.15 counter32 read-only
The timeout period of the source group in the forwarding entry, that is, the aging time of the source group.
                         hwL2mcGroupUpTime 1.3.6.1.4.1.2011.5.25.181.1.5.1.1.16 counter32 read-only
How long the group exists in the forwarding entry.
                         hwL2mcGroupExpires 1.3.6.1.4.1.2011.5.25.181.1.5.1.1.17 counter32 read-only
When the group expires in the forwarding entry, that is, the aging time of the source group.
                         hwL2mcGroupFilterFlag 1.3.6.1.4.1.2011.5.25.181.1.5.1.1.18 integer read-only
The filtering mode: 1: include 2: exclude 3: invalid Enumeration: 'exclude': 2, 'include': 1, 'invalid': 3.
                         hwL2mcGroupHostFlag1 1.3.6.1.4.1.2011.5.25.181.1.5.1.1.19 integer read-only
The mode to create an interface on the host: 1: static 2: dynamic 3: static and dynamic 4: invalid Enumeration: 'dynamic': 2, 'staticDynamic': 3, 'static': 1, 'invalid': 4.
                         hwL2mcGroupHostFlag2 1.3.6.1.4.1.2011.5.25.181.1.5.1.1.20 integer read-only
Whether an interface on the host is created through SSM-mapping: 1: non-mapping 2: mapping Enumeration: 'mapping': 2, 'nonMapping': 1.
                         hwL2mcGroupRowStatus 1.3.6.1.4.1.2011.5.25.181.1.5.1.1.100 rowstatus read-only
The row status.
             hwL2mcGroupCfgInfo 1.3.6.1.4.1.2011.5.25.181.1.6
                 hwL2mcGroupCfgTable 1.3.6.1.4.1.2011.5.25.181.1.6.1 no-access
Table contains l2 multicast static group information for IGMP Snooping.
                     hwL2mcGroupCfgEntry 1.3.6.1.4.1.2011.5.25.181.1.6.1.1 no-access
An entry is created for each active VLAN or VSI in the device create a static group entry and delete when a static group entry deleted.
                         hwGroupCfgPortType 1.3.6.1.4.1.2011.5.25.181.1.6.1.1.1 hwporttype no-access
The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface
                         hwGroupCfgPortIfIndex 1.3.6.1.4.1.2011.5.25.181.1.6.1.1.2 interfaceindexorzero no-access
The interface index. The value 0 indicates that the interface index is invalid.
                         hwGroupCfgPortPeId 1.3.6.1.4.1.2011.5.25.181.1.6.1.1.3 vlanidorany no-access
The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
                         hwGroupCfgPortCeId 1.3.6.1.4.1.2011.5.25.181.1.6.1.1.4 vlanidorany no-access
The CE VID of an interface. The value ranges from 1 to 4095. The value 0 indicates that the PE VID is invalid.
                         hwGroupCfgPeerAddress 1.3.6.1.4.1.2011.5.25.181.1.6.1.1.5 ipaddress no-access
The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.
                         hwGroupCfgVcOrSiteId 1.3.6.1.4.1.2011.5.25.181.1.6.1.1.6 unsigned32 no-access
The VC ID or SITE ID of a PW interface.
                         hwGroupCfgVlanIndex 1.3.6.1.4.1.2011.5.25.181.1.6.1.1.7 vlanidorany no-access
The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
                         hwGroupCfgVsiName 1.3.6.1.4.1.2011.5.25.181.1.6.1.1.8 displaystring no-access
The name of a VSI. If a VLAN is specified, the value is 0.
                         hwGroupCfgGroupAddress 1.3.6.1.4.1.2011.5.25.181.1.6.1.1.9 ipaddress no-access
The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses.
                         hwGroupCfgSourceAddress 1.3.6.1.4.1.2011.5.25.181.1.6.1.1.10 ipaddress no-access
The source IP address of a multicast group.
                         hwGroupCfgRowStatus 1.3.6.1.4.1.2011.5.25.181.1.6.1.1.100 rowstatus read-only
The row status.
             hwL2mcSsmSourceInfo 1.3.6.1.4.1.2011.5.25.181.1.7
                 hwL2mcSsmSourceTable 1.3.6.1.4.1.2011.5.25.181.1.7.1 no-access
This table contains the configuration of the source address list of SSM-Mapping.
                     hwL2mcSsmSourceEntry 1.3.6.1.4.1.2011.5.25.181.1.7.1.1 no-access
An entry is created for each active VLAN or VSI in the device add an entry for SSM-Mapping.
                         hwL2mcSsmSourceVlanIndex 1.3.6.1.4.1.2011.5.25.181.1.7.1.1.1 vlanidorany no-access
The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
                         hwL2mcSsmSourceVsiName 1.3.6.1.4.1.2011.5.25.181.1.7.1.1.2 displaystring no-access
The name of a VSI. If a VLAN is specified, the value is 0.
                         hwL2mcSsmGroupAddress 1.3.6.1.4.1.2011.5.25.181.1.7.1.1.3 ipaddress no-access
The IP address of a multicast group.
                         hwL2mcSsmGroupLen 1.3.6.1.4.1.2011.5.25.181.1.7.1.1.4 integer32 no-access
The mask length of a multicast group.
                         hwL2mcSsmSourceAddress 1.3.6.1.4.1.2011.5.25.181.1.7.1.1.5 ipaddress no-access
The source address of SSM-Mapping, which serves as an index of this table.
                         hwL2mcSsmSourceRowStatus 1.3.6.1.4.1.2011.5.25.181.1.7.1.1.100 rowstatus read-only
The row status.
             hwL2mcPortGroupPolicyCfgInfo 1.3.6.1.4.1.2011.5.25.181.1.8
                 hwL2mcPortGroupPolicyCfgTable 1.3.6.1.4.1.2011.5.25.181.1.8.1 no-access
In this table, you can query or configure a group policy to filter entries on a port.
                     hwL2mcPortGroupPolicyCfgEntry 1.3.6.1.4.1.2011.5.25.181.1.8.1.1 no-access
An entry is created for each active VLAN or VSI in the device when a group policy added.
                         hwPortGroupPolicyPortType 1.3.6.1.4.1.2011.5.25.181.1.8.1.1.1 hwporttype no-access
The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface
                         hwPortGroupPolicyPortIfIndex 1.3.6.1.4.1.2011.5.25.181.1.8.1.1.2 interfaceindexorzero no-access
The interface index. The value 0 indicates that the interface index is invalid.
                         hwPortGroupPolicyPortPeId 1.3.6.1.4.1.2011.5.25.181.1.8.1.1.3 vlanidorany no-access
The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
                         hwPortGroupPolicyPortCeId 1.3.6.1.4.1.2011.5.25.181.1.8.1.1.4 vlanidorany no-access
The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
                         hwPortGroupPolicyPeerAddress 1.3.6.1.4.1.2011.5.25.181.1.8.1.1.5 ipaddress no-access
The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.
                         hwPortGroupPolicyVcOrSiteId 1.3.6.1.4.1.2011.5.25.181.1.8.1.1.6 unsigned32 no-access
The VC ID or SITE ID of a PW interface.
                         hwPortGroupPolicyVlanIndex 1.3.6.1.4.1.2011.5.25.181.1.8.1.1.7 vlanidorany no-access
The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
                         hwPortGroupPolicyVsiName 1.3.6.1.4.1.2011.5.25.181.1.8.1.1.8 displaystring no-access
The name of a VSI. If a VLAN is specified, the value is 0.
                         hwPortGroupPolicyAclNum 1.3.6.1.4.1.2011.5.25.181.1.8.1.1.9 integer32 read-only
The number of a basic ACL. The ACL number ranges from 2000 to 3999. The default value is 0, indicating that the value is invalid.
                         hwPortGroupPolicyIgmpVersion 1.3.6.1.4.1.2011.5.25.181.1.8.1.1.10 integer read-only
The IGMP version. The value ranges from 0 to 3. The default is 0, indicating that no version is specified. Enumeration: 'version3': 3, 'version1': 1, 'version2': 2, 'versionAll': 0.
                         hwPortGroupPolicyRowStatus 1.3.6.1.4.1.2011.5.25.181.1.8.1.1.100 rowstatus read-only
The row status.
             hwL2mcChnlCfgInfo 1.3.6.1.4.1.2011.5.25.181.1.9
                 hwL2mcChnlCfgTable 1.3.6.1.4.1.2011.5.25.181.1.9.1 no-access
This table describes the configurations of a channel.
                     hwL2mcChnlCfgEntry 1.3.6.1.4.1.2011.5.25.181.1.9.1.1 no-access
An entry of channel is created for each VLAN or VSI in the device create an channel.
                         hwChnlCfgVlanIndex 1.3.6.1.4.1.2011.5.25.181.1.9.1.1.1 vlanidorany no-access
The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 0. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global. The value ranges from 1 to 4095.
                         hwChnlCfgVsiName 1.3.6.1.4.1.2011.5.25.181.1.9.1.1.2 displaystring no-access
The name of a VSI. If a VLAN is specified, the value is 0. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global.
                         hwChnlCfgChnlName 1.3.6.1.4.1.2011.5.25.181.1.9.1.1.3 displaystring no-access
The channel name.
                         hwChnlCfgChnlType 1.3.6.1.4.1.2011.5.25.181.1.9.1.1.9 integer read-only
The channel type: 1: SSM 2: ASM Enumeration: 'ssm': 1, 'asm': 2.
                         hwChnlCfgRowStatus 1.3.6.1.4.1.2011.5.25.181.1.9.1.1.100 rowstatus read-only
The row status.
             hwL2mcLimitInfo 1.3.6.1.4.1.2011.5.25.181.1.10
                   hwL2mcLimitTable 1.3.6.1.4.1.2011.5.25.181.1.10.1 no-access
This table describes the configurations of IGMP snooping CAC in a VLAN or a VSI.
                       hwL2mcLimitEntry 1.3.6.1.4.1.2011.5.25.181.1.10.1.1 no-access
An entry is created for each IGMP snooping CAC in a VLAN or a VSI.
                           hwL2mcLimitVlanIndex 1.3.6.1.4.1.2011.5.25.181.1.10.1.1.1 vlanidorany no-access
The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 0. If both hwVlanLimitVlanIndex and hwVlanLimitVSIName are invalid, the configuration is global. The value ranges from 1 to 4095.
                           hwL2mcLimitVsiName 1.3.6.1.4.1.2011.5.25.181.1.10.1.1.2 displaystring no-access
The name of a VSI. If a VLAN is specified, the value is 0. If both hwVlanLimitVlanIndex and hwVlanLimitVSIName are invalid, the configuration is global.
                           hwL2mcLimitChnlName 1.3.6.1.4.1.2011.5.25.181.1.10.1.1.3 displaystring no-access
The channel name.
                           hwL2mcLimitMaxEntry 1.3.6.1.4.1.2011.5.25.181.1.10.1.1.4 integer32 read-only
The maximum number of forwarding entries. The value 0 indicates that the number is invalid.
                           hwL2mcLimitEntryCnt 1.3.6.1.4.1.2011.5.25.181.1.10.1.1.5 counter32 read-only
The number of current forwarding entries.
                           hwL2mcLimitMaxBandWidth 1.3.6.1.4.1.2011.5.25.181.1.10.1.1.6 integer32 read-only
The maximum bandwidth. The value 0 indicates that the bandwidth is invalid.
                           hwL2mcLimitBandWidth 1.3.6.1.4.1.2011.5.25.181.1.10.1.1.7 counter32 read-only
The current bandwidth.
                           hwL2mcLimitAcl 1.3.6.1.4.1.2011.5.25.181.1.10.1.1.8 integer32 read-only
The number of ACL for the multicast groups that do not need to be configured with CAC limit. The ACL number ranges from 2000 to 3999. The default value is 0, indicating that the number is invalid.
                           hwL2mcLimitCfgRowStatus 1.3.6.1.4.1.2011.5.25.181.1.10.1.1.100 rowstatus read-only
The row status.
             hwL2mcPortLimitInfo 1.3.6.1.4.1.2011.5.25.181.1.11
                   hwL2mcPortLimitTable 1.3.6.1.4.1.2011.5.25.181.1.11.1 no-access
This table describes the configurations of IGMP snooping CAC on an interface.
                       hwL2mcPortLimitEntry 1.3.6.1.4.1.2011.5.25.181.1.11.1.1 no-access
An entry is created for each IGMP snooping CAC on an interface.
                           hwPortLimitVlanIndex 1.3.6.1.4.1.2011.5.25.181.1.11.1.1.1 vlanidorany no-access
The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
                           hwPortLimitVsiName 1.3.6.1.4.1.2011.5.25.181.1.11.1.1.2 displaystring no-access
The name of a VSI. If a VLAN is specified, the value is 0.
                           hwPortLimitPortType 1.3.6.1.4.1.2011.5.25.181.1.11.1.1.3 hwporttype no-access
The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface
                           hwPortLimitIfIndex 1.3.6.1.4.1.2011.5.25.181.1.11.1.1.4 interfaceindexorzero no-access
The interface index. The value 0 indicates that the interface index is invalid.
                           hwPortLimitPeId 1.3.6.1.4.1.2011.5.25.181.1.11.1.1.5 vlanidorany no-access
The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
                           hwPortLimitCeId 1.3.6.1.4.1.2011.5.25.181.1.11.1.1.6 vlanidorany no-access
The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
                           hwPortLimitPeerAddress 1.3.6.1.4.1.2011.5.25.181.1.11.1.1.7 ipaddress no-access
The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.
                           hwPortLimitVcOrSiteId 1.3.6.1.4.1.2011.5.25.181.1.11.1.1.8 unsigned32 no-access
The VC ID or SITE ID of a PW interface.
                           hwPortLimitChnlName 1.3.6.1.4.1.2011.5.25.181.1.11.1.1.9 displaystring no-access
The channel name.
                           hwPortLimitAcl 1.3.6.1.4.1.2011.5.25.181.1.11.1.1.10 integer32 read-only
The number of ACL for the multicast groups that do not need to be configured with CAC limit. The ACL number ranges from 2000 to 3999. The default value is 0, indicating that the number is invalid.
                           hwPortLimitMaxEntry 1.3.6.1.4.1.2011.5.25.181.1.11.1.1.11 integer32 read-only
The maximum number of forwarding entries. The value 0 indicates that the number is invalid.
                           hwPortLimitEntryCnt 1.3.6.1.4.1.2011.5.25.181.1.11.1.1.12 counter32 read-only
The number of current forwarding entries.
                           hwPortLimitMaxBandWidth 1.3.6.1.4.1.2011.5.25.181.1.11.1.1.13 integer32 read-only
The maximum bandwidth. The value 0 indicates that the bandwidth is invalid.
                           hwPortLimitBandWidth 1.3.6.1.4.1.2011.5.25.181.1.11.1.1.14 counter32 read-only
The current bandwidth.
                           hwPortLimitCfgRowStatus 1.3.6.1.4.1.2011.5.25.181.1.11.1.1.100 rowstatus read-only
The row status.
             hwL2mcFastChnlCfgInfo 1.3.6.1.4.1.2011.5.25.181.1.12
                   hwL2mcFastChnlCfgTable 1.3.6.1.4.1.2011.5.25.181.1.12.1 no-access
Table contains l2 multicast fast forward information for IGMP Snooping.
                       hwL2mcFastChnlCfgEntry 1.3.6.1.4.1.2011.5.25.181.1.12.1.1 no-access
An entry is created for each IGMP snooping fast channel.
                           hwL2mcFastChnlCfgVlanIndex 1.3.6.1.4.1.2011.5.25.181.1.12.1.1.1 vlanidorany no-access
The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
                           hwL2mcFastChnlCfgVsiName 1.3.6.1.4.1.2011.5.25.181.1.12.1.1.2 displaystring no-access
The name of a VSI. If a VLAN is specified, the value is 0.
                           hwL2mcFastChnlCfgGroupAddress 1.3.6.1.4.1.2011.5.25.181.1.12.1.1.3 ipaddress no-access
The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses.
                           hwL2mcFastChnlCfgGroupLen 1.3.6.1.4.1.2011.5.25.181.1.12.1.1.4 integer32 no-access
The mask length of a multicast group address.
                           hwL2mcFastChnlCfgSourceAddress 1.3.6.1.4.1.2011.5.25.181.1.12.1.1.5 ipaddress no-access
The source IP address of a multicast group.
                           hwL2mcFastChnlCfgSourceLen 1.3.6.1.4.1.2011.5.25.181.1.12.1.1.6 integer32 no-access
The mask length of a multicast source address.
                           hwL2mcFastChnlCfgRowStatus 1.3.6.1.4.1.2011.5.25.181.1.12.1.1.100 rowstatus read-only
The row status.
             hwL2mcRouterPortInfo 1.3.6.1.4.1.2011.5.25.181.1.13
                   hwL2mcRouterPortInfoTable 1.3.6.1.4.1.2011.5.25.181.1.13.1 no-access
Table contains l2 multicast router port information for IGMP Snooping.
                       hwL2mcRouterPortInfoEntry 1.3.6.1.4.1.2011.5.25.181.1.13.1.1 no-access
An entry is created for each IGMP snooping router port on an interface.
                           hwL2mcRouterPortVlanIndex 1.3.6.1.4.1.2011.5.25.181.1.13.1.1.1 vlanidorany no-access
The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
                           hwL2mcRouterPortVsiName 1.3.6.1.4.1.2011.5.25.181.1.13.1.1.2 displaystring no-access
The name of a VSI. If a VLAN is specified, the value is 0.
                           hwL2mcRouterPortType 1.3.6.1.4.1.2011.5.25.181.1.13.1.1.3 hwporttype no-access
The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface
                           hwL2mcRouterPortIfIndex 1.3.6.1.4.1.2011.5.25.181.1.13.1.1.4 interfaceindexorzero no-access
The interface index. The value 0 indicates that the interface index is invalid.
                           hwL2mcRouterPortPeId 1.3.6.1.4.1.2011.5.25.181.1.13.1.1.5 vlanidorany no-access
The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
                           hwL2mcRouterPortCeId 1.3.6.1.4.1.2011.5.25.181.1.13.1.1.6 vlanidorany no-access
The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
                           hwL2mcRouterPortPeerAddress 1.3.6.1.4.1.2011.5.25.181.1.13.1.1.7 ipaddress no-access
The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.
                           hwL2mcRouterPortVcOrSiteId 1.3.6.1.4.1.2011.5.25.181.1.13.1.1.8 unsigned32 no-access
The VC ID or SITE ID of a PW interface.
                           hwL2mcRouterPortGroupUpTime 1.3.6.1.4.1.2011.5.25.181.1.13.1.1.16 counter32 read-only
How long the group exists in the forwarding entry.
                           hwL2mcRouterPortGroupExpires 1.3.6.1.4.1.2011.5.25.181.1.13.1.1.17 counter32 read-only
The timeout period of the router port, that is, the aging time of the router port.
                           hwL2mcRouterPortGroupHostFlag1 1.3.6.1.4.1.2011.5.25.181.1.13.1.1.19 integer read-only
The mode to create an interface on the host: 1: static 2: dynamic 3: static and dynamic Enumeration: 'dynamic': 2, 'staticDynamic': 3, 'static': 1.
             hwL2mcRouterPortCfgInfo 1.3.6.1.4.1.2011.5.25.181.1.14
                   hwL2mcRouterPortCfgTable 1.3.6.1.4.1.2011.5.25.181.1.14.1 no-access
Table contains l2 multicast configuration of router port for IGMP Snooping.
                       hwL2mcRouterPortCfgEntry 1.3.6.1.4.1.2011.5.25.181.1.14.1.1 no-access
An entry is created for each IGMP snooping static router port on an interface.
                           hwL2mcRouterPortCfgPortType 1.3.6.1.4.1.2011.5.25.181.1.14.1.1.1 hwporttype no-access
The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface
                           hwL2mcRouterPortCfgPortIfIndex 1.3.6.1.4.1.2011.5.25.181.1.14.1.1.2 interfaceindexorzero no-access
The interface index. The value 0 indicates that the interface index is invalid.
                           hwL2mcRouterPortCfgPortPeId 1.3.6.1.4.1.2011.5.25.181.1.14.1.1.3 vlanidorany no-access
The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
                           hwL2mcRouterPortCfgPortCeId 1.3.6.1.4.1.2011.5.25.181.1.14.1.1.4 vlanidorany no-access
The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
                           hwL2mcRouterPortCfgPeerAddress 1.3.6.1.4.1.2011.5.25.181.1.14.1.1.5 ipaddress no-access
The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.
                           hwL2mcRouterPortCfgVcOrSiteId 1.3.6.1.4.1.2011.5.25.181.1.14.1.1.6 unsigned32 no-access
The VC ID or SITE ID of a PW interface.
                           hwL2mcRouterPortCfgVlanIndex 1.3.6.1.4.1.2011.5.25.181.1.14.1.1.7 vlanidorany no-access
The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
                           hwL2mcRouterPortCfgVsiName 1.3.6.1.4.1.2011.5.25.181.1.14.1.1.8 displaystring no-access
The name of a VSI. If a VLAN is specified, the value is 0.
                           hwL2mcRouterPortCfgRowStatus 1.3.6.1.4.1.2011.5.25.181.1.14.1.1.100 rowstatus read-only
The row status.
             hwL2mcChnlGroupCfgInfo 1.3.6.1.4.1.2011.5.25.181.1.15
                   hwL2mcChnlGroupCfgTable 1.3.6.1.4.1.2011.5.25.181.1.15.1 no-access
This table describes the group configurations of a channel.
                       hwL2mcChnlGroupCfgEntry 1.3.6.1.4.1.2011.5.25.181.1.15.1.1 no-access
An entry of channel is created for each VLAN or VSI in the device create an channel.
                           hwChnlGroupCfgVlanIndex 1.3.6.1.4.1.2011.5.25.181.1.15.1.1.1 vlanidorany no-access
The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global. The value ranges from 1 to 4095.
                           hwChnlGroupCfgVsiName 1.3.6.1.4.1.2011.5.25.181.1.15.1.1.2 displaystring no-access
The name of a VSI. If a VLAN is specified, the value is 0. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global.
                           hwChnlCfgGroupChnlName 1.3.6.1.4.1.2011.5.25.181.1.15.1.1.3 displaystring no-access
The channel name.
                           hwChnlGroupCfgGroupAddress 1.3.6.1.4.1.2011.5.25.181.1.15.1.1.4 ipaddress no-access
The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses.
                           hwChnlGroupCfgGroupLen 1.3.6.1.4.1.2011.5.25.181.1.15.1.1.5 integer32 no-access
The mask length of a multicast group.
                           hwChnlGroupCfgSourceAddress 1.3.6.1.4.1.2011.5.25.181.1.15.1.1.6 ipaddress no-access
The source IP address of a multicast group.
                           hwChnlGroupCfgSourceLen 1.3.6.1.4.1.2011.5.25.181.1.15.1.1.7 integer32 no-access
The mask length of a multicast source address.
                           hwChnlGroupCfgPerBand 1.3.6.1.4.1.2011.5.25.181.1.15.1.1.9 integer32 read-only
The bandwidth of a multicast group.
                           hwChnlGroupCfgRowStatus 1.3.6.1.4.1.2011.5.25.181.1.15.1.1.100 rowstatus read-only
The row status.
             hwL2mcGroupPolicyCfgInfo 1.3.6.1.4.1.2011.5.25.181.1.16
                   hwL2mcGroupPolicyCfgTable 1.3.6.1.4.1.2011.5.25.181.1.16.1 no-access
In this table, you can query or configure a group policy to filter entries on a port.
                       hwL2mcGroupPolicyCfgEntry 1.3.6.1.4.1.2011.5.25.181.1.16.1.1 no-access
An entry is created for each active VLAN or VSI in the device when a group policy added.
                           hwGroupPolicyVlanIndex 1.3.6.1.4.1.2011.5.25.181.1.16.1.1.1 vlanidorany no-access
The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
                           hwGroupPolicyVsiName 1.3.6.1.4.1.2011.5.25.181.1.16.1.1.2 displaystring no-access
The name of a VSI. If a VLAN is specified, the value is 0.
                           hwGroupPolicyAclNum 1.3.6.1.4.1.2011.5.25.181.1.16.1.1.3 integer32 read-only
The number of a basic ACL. The ACL number ranges from 2000 to 3999. The default value is 0, indicating that the value is invalid.
                           hwGroupPolicyIgmpVersion 1.3.6.1.4.1.2011.5.25.181.1.16.1.1.4 integer read-only
The IGMP version. The value ranges from 0 to 3. The default is 0, indicating that no version is specified. Enumeration: 'version3': 3, 'version1': 1, 'version2': 2, 'versionAll': 0.
                           hwGroupPolicyRowStatus 1.3.6.1.4.1.2011.5.25.181.1.16.1.1.100 rowstatus read-only
The row status.
             hwL2mcChnlDenyCfgInfo 1.3.6.1.4.1.2011.5.25.181.1.17
                   hwL2mcChnlDenyCfgTable 1.3.6.1.4.1.2011.5.25.181.1.17.1 no-access
This table describes the configurations of deny unspecified group for each VLAN or VSI, or in global.
                       hwL2mcChnlDenyCfgEntry 1.3.6.1.4.1.2011.5.25.181.1.17.1.1 no-access
An entry of channel deny is created for each VLAN or VSI in the device create an channel.
                           hwChnlDenyCfgVlanIndex 1.3.6.1.4.1.2011.5.25.181.1.17.1.1.1 vlanidorany no-access
The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global. The value ranges from 1 to 4095.
                           hwChnlDenyCfgVsiName 1.3.6.1.4.1.2011.5.25.181.1.17.1.1.2 displaystring no-access
The name of a VSI. If a VLAN is specified, the value is 0. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global.
                           hwChnlDenyCfg 1.3.6.1.4.1.2011.5.25.181.1.17.1.1.3 integer read-only
Whether discard unspecified channel: 1: not discard 2: discard Enumeration: 'forward': 1, 'discard': 2.
                           hwChnlDenyCfgRowStatus 1.3.6.1.4.1.2011.5.25.181.1.17.1.1.100 rowstatus read-only
The row status.
         hwL2mcMibConformance 1.3.6.1.4.1.2011.5.25.181.100
                 hwL2mcMibCompliances 1.3.6.1.4.1.2011.5.25.181.100.1
                     hwIgspMibCompliance 1.3.6.1.4.1.2011.5.25.181.100.1.1
The compliance statement for device supporting IGMP Snooping.
                 hwL2mcMibGroups 1.3.6.1.4.1.2011.5.25.181.100.2
                     hwIgspSystemInfoGroup 1.3.6.1.4.1.2011.5.25.181.100.2.1
.
                     hwL2mcCfgInfoGroup 1.3.6.1.4.1.2011.5.25.181.100.2.2
.
                     hwL2mcStatisticsInfoGroup 1.3.6.1.4.1.2011.5.25.181.100.2.3
.
                     hwL2mcFwdInfoGroup 1.3.6.1.4.1.2011.5.25.181.100.2.4
.
                     hwL2mcGroupInfoGroup 1.3.6.1.4.1.2011.5.25.181.100.2.5
.
                     hwL2mcGroupCfgInfoGroup 1.3.6.1.4.1.2011.5.25.181.100.2.6
.
                     hwL2mcSsmSourceInfoGroup 1.3.6.1.4.1.2011.5.25.181.100.2.7
.
                     hwL2mcPortGroupPolicyCfgInfoGroup 1.3.6.1.4.1.2011.5.25.181.100.2.8
.
                     hwL2mcChnlCfgInfoGroup 1.3.6.1.4.1.2011.5.25.181.100.2.9
.
                     hwL2mcLimitInfoGroup 1.3.6.1.4.1.2011.5.25.181.100.2.10
.
                     hwL2mcPortLimitInfoGroup 1.3.6.1.4.1.2011.5.25.181.100.2.11
.
                     hwL2mcFastChnlCfgInfoGroup 1.3.6.1.4.1.2011.5.25.181.100.2.12
.
                     hwL2mcRouterPortInfoGroup 1.3.6.1.4.1.2011.5.25.181.100.2.13
.
                     hwL2mcRouterPortCfgInfoGroup 1.3.6.1.4.1.2011.5.25.181.100.2.14
.
                     hwL2mcChnlGroupCfgInfoGroup 1.3.6.1.4.1.2011.5.25.181.100.2.15
.
                     hwL2mcGroupPolicyCfgInfoGroup 1.3.6.1.4.1.2011.5.25.181.100.2.16
.
                     hwL2mcChnlDenyCfgInfoGroup 1.3.6.1.4.1.2011.5.25.181.100.2.17
.