HUAWEI-HGMP-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-HGMP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, P-BRIDGE-MIB, HUAWEI-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwCluster 1.3.6.1.4.1.2011.6.7
HUAWEI-HGMP-MIB is defined and owned by Huawei. This MIB includes four parts: the cluster, stack, Neighbor Discovery Protocol (NDP), and Network Topology Discovery Protocol (NTDP). This MIB can monitor the cluster, stack and topology collection.
     hwClusterObject 1.3.6.1.4.1.2011.6.7.1
         hgmpEventsV2 1.3.6.1.4.1.2011.6.7.1.0
             hgmpMemberfailure 1.3.6.1.4.1.2011.6.7.1.0.1
When a cluster member failed, send an SNMP trap to the network manager.
             hgmpMemberRecover 1.3.6.1.4.1.2011.6.7.1.0.2
When a cluster member recovered, send an SNMP trap to the network manager.
             hgmpMemberStatusChange 1.3.6.1.4.1.2011.6.7.1.0.3
When a cluster member status changed, send an SNMP trap to the network manager.
             hgmpNetTopChange 1.3.6.1.4.1.2011.6.7.1.0.4
When net topology of this cluster change, send a snmp trap to the network management.
             hgmpMemberAdd 1.3.6.1.4.1.2011.6.7.1.0.6
When a cluster member added, send an SNMP trap to the network manager.
         hgmpSetVLANSecurity 1.3.6.1.4.1.2011.6.7.1.1 integer read-write
Configure whether to perform the VLAN check inside the cluster. The default value is noSecurity(0). Enumeration: 'noSecurity': 0, 'security': 1.
         hgmpHandShakeInterval 1.3.6.1.4.1.2011.6.7.1.2 integer32 read-write
Handshaking interval of the cluster member switches. The default value is 10.
         hgmpHandShakeHoldtime 1.3.6.1.4.1.2011.6.7.1.3 integer32 read-write
Holdtime of command switch and member switch in the cluster. The default value is 60.
         hgmpGrpMemberTableChange 1.3.6.1.4.1.2011.6.7.1.4 integer32 read-only
Add 1 to the member list after it changes. The administrator checks if the value has changed. If not, it will not read the list once more. The default value is 0.
         hgmpMemberDisconRate 1.3.6.1.4.1.2011.6.7.1.5 integer32 read-only
Disconnection times of the member and command switches divided by member number times 1000. The default value is 0.
         hgmpCmdLanswitchFlag 1.3.6.1.4.1.2011.6.7.1.6 integer read-write
Command switch flag. The default value is false(0). If the value is set to 1, the cluster name is 'huawei' by default. Enumeration: 'true': 1, 'false': 0.
         hgmpCmdClusterName 1.3.6.1.4.1.2011.6.7.1.7 octet string read-write
Cluster name of the command switch.
         hgmpMngPriIpSegCMIP 1.3.6.1.4.1.2011.6.7.1.8 ipaddress read-write
The private management IP address of the command switch, which cannot be modified after the cluster has been created. The default value is '0.0.0.0'.
         hgmpMngPriIpMask 1.3.6.1.4.1.2011.6.7.1.9 ipaddress read-write
The private management IP address mask assigned by the command switch, which cannot be modified after the cluster has been created. The default value is '0.0.0.0'.
         hgmpFtpServer 1.3.6.1.4.1.2011.6.7.1.10 ipaddress read-write
The cluster members can access the FTP Server through the command switch, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'.
         hgmpTftpServer 1.3.6.1.4.1.2011.6.7.1.11 ipaddress read-write
The cluster members can access the TFTP Server through the command switch, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'.
         hgmpSnmpHost 1.3.6.1.4.1.2011.6.7.1.12 ipaddress read-write
The Snmp Host to send the cluster trap packets, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'.
         hgmpLogHost 1.3.6.1.4.1.2011.6.7.1.13 ipaddress read-write
Log host of the cluster, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'.
         hgmpGrpMemberTable 1.3.6.1.4.1.2011.6.7.1.14 no-access
Table of cluster member switches.
               hgmpGrpMemberEntry 1.3.6.1.4.1.2011.6.7.1.14.1 no-access
Provides information about cluster member entry.
                   hgmpGrpMemberDeviceId 1.3.6.1.4.1.2011.6.7.1.14.1.1 octet string read-only
2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising a character string of hexadecimal numbers.
                   hgmpGrpMemberSerial 1.3.6.1.4.1.2011.6.7.1.14.1.2 integer32 read-only
When adding member switch to the cluster, the command switch will assign an unique integer to identify it.
                   hgmpGrpMemberIpAddr 1.3.6.1.4.1.2011.6.7.1.14.1.3 ipaddress read-only
The private IP addresses of the member switches for communication inside the cluster.
                   hgmpGrpMemberName 1.3.6.1.4.1.2011.6.7.1.14.1.4 octet string read-only
Hostname of the member switch.
                   hgmpGrpMemberPassword 1.3.6.1.4.1.2011.6.7.1.14.1.5 octet string read-write
Member password for joining a cluster.
                   hgmpGrpMemberPlatform 1.3.6.1.4.1.2011.6.7.1.14.1.6 octet string read-only
Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.
                   hgmpGrpMemberStatus 1.3.6.1.4.1.2011.6.7.1.14.1.7 integer read-only
Member status on the command switch, used for displaying the network management status. Enumeration: 'fault': 1, 'normal': 0.
                   hgmpGrpMemberDisconCount 1.3.6.1.4.1.2011.6.7.1.14.1.8 integer32 read-only
Count of inside communication disconnections between the member switch and the command switch.
                   hgmpGrpMemberEnrollTime 1.3.6.1.4.1.2011.6.7.1.14.1.9 integer32 read-only
Enrollment time of the member, measured in seconds.
                   hgmpGrpMemberOperate 1.3.6.1.4.1.2011.6.7.1.14.1.10 rowstatus read-write
Operation indication field, indicating the operation of adding/removing a member by the network management agent and the status of current line.
         hgmpMemberResetTable 1.3.6.1.4.1.2011.6.7.1.15 no-access
Reset a member switch in the cluster.
               hgmpMemberResetEntry 1.3.6.1.4.1.2011.6.7.1.15.1 no-access
Provides information about resetting member entry.
                   hgmpMemberResetMAC 1.3.6.1.4.1.2011.6.7.1.15.1.1 macaddress read-only
The management MAC address of the switch to be reset, which is the unique identifier of the switch.
                   hgmpMemberEraseflash 1.3.6.1.4.1.2011.6.7.1.15.1.2 integer read-write
Whether to erase the configuration file from the flash after resetting a switch. When this node is read, cannotget(65535) will be returned. Enumeration: 'cannotget': 65535, 'erase': 1, 'noErase': 0.
         hgmpClusterRole 1.3.6.1.4.1.2011.6.7.1.16 integer read-only
Role of this switch in a cluster. Enumeration: 'roleMEMBERSW': 2, 'roleUNISW': 17, 'roleBAKSW': 3, 'roleCASW': 16, 'roleCMDSW': 1.
         hgmpClusterMaxPoolNum 1.3.6.1.4.1.2011.6.7.1.17 integer32 read-only
Maximum switch members that the cluster can support (including the command switch).
         hgmpClusterCmdSwMac 1.3.6.1.4.1.2011.6.7.1.18 macaddress read-only
The mac address of command switch. It will be 00:00:00:00:00:00 when not a member of a cluster.
         hgmpRun 1.3.6.1.4.1.2011.6.7.1.19 integer read-write
Status of the cluster function. Enumeration: 'true': 1, 'false': 0.
         hgmpClusterAutojoin 1.3.6.1.4.1.2011.6.7.1.20 integer read-write
Status of the cluster autojoin function. The default value is false(0). Enumeration: 'true': 1, 'false': 0.
         hgmpClusterDiscAgingTime 1.3.6.1.4.1.2011.6.7.1.21 integer32 read-write
Aging time of the lanswitch in disconnect state. The default value is 0.
         hgmpPlugAndPlayStatus 1.3.6.1.4.1.2011.6.7.1.22 enabledstatus read-write
Status of the plug and play function. The default value is disabled(2) .
         hgmpMultiMacAddress 1.3.6.1.4.1.2011.6.7.1.23 macaddress read-write
Multicast MAC address of cluster. The default value is '01:80:C2:00:00:0A'.
         hgmpManageVlan 1.3.6.1.4.1.2011.6.7.1.24 integer32 read-write
ID of the management VLAN of the cluster. The default value is 1.
         hgmpSftpServer 1.3.6.1.4.1.2011.6.7.1.25 ipaddress read-write
The cluster members can access the SFTP Server through the command switch, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'.
         hgmpUnrelatedPortNdpAdminTable 1.3.6.1.4.1.2011.6.7.1.26 no-access
The table of the commands to set the NDP status on unrelated interfaces of cluster members.
               hgmpUnrelatedPortNdpAdminEntry 1.3.6.1.4.1.2011.6.7.1.26.1 no-access
The entry used to set the NDP status on unrelated interfaces of cluster members.
                   hgmpUnrelatedPortNdpAdminCmdId 1.3.6.1.4.1.2011.6.7.1.26.1.1 integer32 no-access
The identifier of the command to set the NDP status on unrelated interfaces of cluster members.
                   hgmpUnrelatedPortNdpAdminGroupType 1.3.6.1.4.1.2011.6.7.1.26.1.2 integer read-only
Type of grouping member swithces. Enumeration: 'allMembers': 1, 'memberIdList': 3, 'deviceType': 2.
                   hgmpUnrelatedPortNdpAdminGroupValue 1.3.6.1.4.1.2011.6.7.1.26.1.3 octet string read-only
Details about grouping member switches.
                   hgmpUnrelatedPortNdpAdminStatus 1.3.6.1.4.1.2011.6.7.1.26.1.4 enabledstatus read-write
The flag bit identifying whether NDP is enabled or not on unrelated interface on unrelated interfaces of cluster members.
                   hgmpUnrelatedPortNdpAdminRowStatus 1.3.6.1.4.1.2011.6.7.1.26.1.5 rowstatus read-only
Row status for this table.
         hgmpUnrelatedPortNdpResultTable 1.3.6.1.4.1.2011.6.7.1.27 no-access
The result table of enabling or disabling NDP on unrelated interfaces of cluster members.
               hgmpUnrelatedPortNdpResultEntry 1.3.6.1.4.1.2011.6.7.1.27.1 no-access
The entry of the result when enabling or disabling NDP on unrelated interfaces of cluster members.
                   hgmpUnrelatedPortNdpResultMemberMac 1.3.6.1.4.1.2011.6.7.1.27.1.1 macaddress no-access
MAC address of the member switch.
                   hgmpUnrelatedPortNdpResultMemberId 1.3.6.1.4.1.2011.6.7.1.27.1.2 integer32 read-only
Identifier of the member switch.
                   hgmpUnrelatedPortNdpResult 1.3.6.1.4.1.2011.6.7.1.27.1.3 integer read-only
Results returned from member switches. Enumeration: 'failure': 2, 'running': 3, 'timeout': 4, 'success': 1.
         hgmpUnrelatedPortNtdpAdminTable 1.3.6.1.4.1.2011.6.7.1.28 no-access
The table of the commands to set the NTDP status on unrelated interfaces of cluster members.
               hgmpUnrelatedPortNtdpAdminEntry 1.3.6.1.4.1.2011.6.7.1.28.1 no-access
The entry used to set the NTDP status on unrelated interfaces of cluster members.
                   hgmpUnrelatedPortNtdpAdminCmdId 1.3.6.1.4.1.2011.6.7.1.28.1.1 integer32 no-access
The identifier of the command to set the NTDP status on unrelated interfaces of cluster members.
                   hgmpUnrelatedPortNtdpAdminGroupType 1.3.6.1.4.1.2011.6.7.1.28.1.2 integer read-only
Type of grouping member swithces. Enumeration: 'allMembers': 1, 'memberIdList': 3, 'deviceType': 2.
                   hgmpUnrelatedPortNtdpAdminGroupValue 1.3.6.1.4.1.2011.6.7.1.28.1.3 octet string read-only
Details about grouping member switches.
                   hgmpUnrelatedPortNtdpAdminStatus 1.3.6.1.4.1.2011.6.7.1.28.1.4 enabledstatus read-write
The flag bit identifying whether NTDP is enabled or not on unrelated interface on unrelated interfaces of cluster members.
                   hgmpUnrelatedPortNtdpAdminRowStatus 1.3.6.1.4.1.2011.6.7.1.28.1.5 rowstatus read-only
Row status for this table.
         hgmpUnrelatedPortNtdpResultTable 1.3.6.1.4.1.2011.6.7.1.29 no-access
The result table of enabling or disabling NTDP on unrelated interfaces of cluster members.
               hgmpUnrelatedPortNtdpResultEntry 1.3.6.1.4.1.2011.6.7.1.29.1 no-access
The entry of the result when enabling or disabling NTDP on unrelated interfaces of cluster members.
                   hgmpUnrelatedPortNtdpResultMemberMac 1.3.6.1.4.1.2011.6.7.1.29.1.1 macaddress no-access
MAC address of the member switch.
                   hgmpUnrelatedPortNtdpResultMemberId 1.3.6.1.4.1.2011.6.7.1.29.1.2 integer32 read-only
Identifier of the member switch.
                   hgmpUnrelatedPortNtdpResult 1.3.6.1.4.1.2011.6.7.1.29.1.3 integer read-only
Results returned from member switches. Enumeration: 'failure': 2, 'running': 3, 'timeout': 4, 'success': 1.
         hgmpBatchUpgradeTable 1.3.6.1.4.1.2011.6.7.1.30 no-access
Table of batch upgrade commands.
               hgmpBatchUpgradeEntry 1.3.6.1.4.1.2011.6.7.1.30.1 no-access
Provides the information of batch upgrade entry.
                   hgmpBatchUpgradeCmdId 1.3.6.1.4.1.2011.6.7.1.30.1.1 integer32 no-access
Identifier of batch upgrade commands.
                   hgmpBatchUpgradeGroupType 1.3.6.1.4.1.2011.6.7.1.30.1.2 integer read-only
Type of grouping member switches. Enumeration: 'allMembers': 1, 'memberIdList': 3, 'deviceType': 2.
                   hgmpBatchUpgradeGroupValue 1.3.6.1.4.1.2011.6.7.1.30.1.3 octet string read-only
Details about grouping member switches.
                   hgmpBatchUpgradeFileType 1.3.6.1.4.1.2011.6.7.1.30.1.4 integer read-only
Type of the file to be upgraded. Enumeration: 'licenseFile': 5, 'patchFile': 2, 'configFile': 3, 'pafFile': 4, 'versionFile': 1.
                   hgmpBatchUpgradeFileName 1.3.6.1.4.1.2011.6.7.1.30.1.5 octet string read-only
Path of the file to be upgraded.
                   hgmpBatchUpgradeRowStatus 1.3.6.1.4.1.2011.6.7.1.30.1.6 rowstatus read-only
Row status for this table.
         hgmpBatchUpgradeResultTable 1.3.6.1.4.1.2011.6.7.1.31 no-access
Results of batch commands returned from member switches.
               hgmpBatchUpgradeResultEntry 1.3.6.1.4.1.2011.6.7.1.31.1 no-access
Provides the result of batch upgrade entry.
                   hgmpBatchUpgradeResultMemberMac 1.3.6.1.4.1.2011.6.7.1.31.1.1 macaddress no-access
MAC address of the member switch.
                   hgmpBatchUpgradeResultMemberId 1.3.6.1.4.1.2011.6.7.1.31.1.2 integer32 read-only
Identifier of the member switch.
                   hgmpBatchUpgradeResult 1.3.6.1.4.1.2011.6.7.1.31.1.3 integer read-only
Results returned from member switchs. Enumeration: 'failure': 2, 'running': 3, 'timeout': 4, 'success': 1.
         hgmpBatchRebootTable 1.3.6.1.4.1.2011.6.7.1.32 no-access
Table of commands for member switch reboot.
               hgmpBatchRebootEntry 1.3.6.1.4.1.2011.6.7.1.32.1 no-access
Provides the information of member reboot entry.
                   hgmpBatchRebootCmdId 1.3.6.1.4.1.2011.6.7.1.32.1.1 integer32 no-access
Identifier of the commands for member switch reboot.
                   hgmpBatchRebootGroupType 1.3.6.1.4.1.2011.6.7.1.32.1.2 integer read-only
Type of grouping member swithces. Enumeration: 'allMembers': 1, 'memberIdList': 3, 'deviceType': 2.
                   hgmpBatchRebootGroupValue 1.3.6.1.4.1.2011.6.7.1.32.1.3 octet string read-only
Details about grouping member switches.
                   hgmpBatchRebootRowStatus 1.3.6.1.4.1.2011.6.7.1.32.1.4 rowstatus read-only
Row status for this table.
         hgmpBatchRebootResultTable 1.3.6.1.4.1.2011.6.7.1.33 no-access
Results of reboot command returned from member switches.
               hgmpBatchRebootResultEntry 1.3.6.1.4.1.2011.6.7.1.33.1 no-access
Provides the result of member reboot entry.
                   hgmpBatchRebootResultMemberMac 1.3.6.1.4.1.2011.6.7.1.33.1.1 macaddress no-access
MAC address of the member switch.
                   hgmpBatchRebootResultMemberId 1.3.6.1.4.1.2011.6.7.1.33.1.2 integer32 read-only
Identifier of the member switch.
                   hgmpBatchRebootResult 1.3.6.1.4.1.2011.6.7.1.33.1.3 integer read-only
Results returned from member switches. Enumeration: 'failure': 2, 'running': 3, 'timeout': 4, 'success': 1.
         hgmpBatchSaveTable 1.3.6.1.4.1.2011.6.7.1.34 no-access
The table of saving configuration files on cluster members.
               hgmpBatchSaveEntry 1.3.6.1.4.1.2011.6.7.1.34.1 no-access
The entry of saving configuration files on cluster members.
                   hgmpBatchSaveCmdId 1.3.6.1.4.1.2011.6.7.1.34.1.1 integer32 no-access
The identifier of the commands to save configuration files on cluster members.
                   hgmpBatchSaveGroupType 1.3.6.1.4.1.2011.6.7.1.34.1.2 integer read-only
Type of grouping member swithces. Enumeration: 'allMembers': 1, 'memberIdList': 3, 'deviceType': 2.
                   hgmpBatchSaveGroupValue 1.3.6.1.4.1.2011.6.7.1.34.1.3 octet string read-only
Details about grouping member switches.
                   hgmpBatchSaveRowStatus 1.3.6.1.4.1.2011.6.7.1.34.1.4 rowstatus read-only
Row status for this table.
         hgmpBatchSaveResultTable 1.3.6.1.4.1.2011.6.7.1.35 no-access
The results of saving configuration files on cluster members.
               hgmpBatchSaveResultEntry 1.3.6.1.4.1.2011.6.7.1.35.1 no-access
The entry of result when saving configuration files on cluster members.
                   hgmpBatchSaveResultMemberMac 1.3.6.1.4.1.2011.6.7.1.35.1.1 macaddress no-access
MAC address of the member switch.
                   hgmpBatchSaveResultMemberId 1.3.6.1.4.1.2011.6.7.1.35.1.2 integer32 read-only
Identifier of the member switch.
                   hgmpBatchSaveResult 1.3.6.1.4.1.2011.6.7.1.35.1.3 integer read-only
Results returned from member switches. Enumeration: 'failure': 2, 'running': 3, 'timeout': 4, 'success': 1.
         hgmpBatchSynchronizeCfgFileTable 1.3.6.1.4.1.2011.6.7.1.36 no-access
The table of synchronizing configuration files on cluster members.
               hgmpBatchSynchronizeCfgFileEntry 1.3.6.1.4.1.2011.6.7.1.36.1 no-access
The entry of synchronizing configuration files on cluster members.
                   hgmpBatchSynchronizeCfgFileCmdId 1.3.6.1.4.1.2011.6.7.1.36.1.1 integer32 no-access
The identifier of the command of synchronizing configuration files on cluster members.
                   hgmpBatchSynchronizeCfgFileGroupType 1.3.6.1.4.1.2011.6.7.1.36.1.2 integer read-only
Type of grouping member swithces. Enumeration: 'allMembers': 1, 'memberIdList': 3, 'deviceType': 2.
                   hgmpBatchSynchronizeCfgFileGroupValue 1.3.6.1.4.1.2011.6.7.1.36.1.3 octet string read-only
Details about grouping member switches.
                   hgmpBatchSynchronizeCfgFileRowStatus 1.3.6.1.4.1.2011.6.7.1.36.1.4 rowstatus read-only
Row status for this table.
         hgmpBatchSynchronizeCfgFileResultTable 1.3.6.1.4.1.2011.6.7.1.37 no-access
The result of synchronizing configuration files on cluster members.
               hgmpBatchSynchronizeCfgFileResultEntry 1.3.6.1.4.1.2011.6.7.1.37.1 no-access
The entry of result when synchronizing configuration files on cluster members.
                   hgmpBatchSynchronizeCfgFileResultMemberMac 1.3.6.1.4.1.2011.6.7.1.37.1.1 macaddress no-access
MAC address of the member switch.
                   hgmpBatchSynchronizeCfgFileResultMemberId 1.3.6.1.4.1.2011.6.7.1.37.1.2 integer32 read-only
Identifier of the member switch.
                   hgmpBatchSynchronizeCfgFileResult 1.3.6.1.4.1.2011.6.7.1.37.1.3 integer read-only
Results returned from member switches. Enumeration: 'failure': 2, 'running': 3, 'timeout': 4, 'success': 1.
         hgmpMemberRebootTimeoutValue 1.3.6.1.4.1.2011.6.7.1.38 integer32 read-write
Timeout time of the member reboot operation (in seconds). The default value is 360 seconds.
         hgmpClusterVersion 1.3.6.1.4.1.2011.6.7.1.39 integer read-write
Configure the cluster version. The default value is v2c(2). Enumeration: 'v2c': 2, 'v2': 1, 'v3': 3.
     hwStackObject 1.3.6.1.4.1.2011.6.7.2
         hgmpStackEventsV2 1.3.6.1.4.1.2011.6.7.2.0
             hgmpStackMemberfailure 1.3.6.1.4.1.2011.6.7.2.0.1
When a stack member failed, send an SNMP trap to the network manager.
             hgmpStackMemberRecover 1.3.6.1.4.1.2011.6.7.2.0.2
When a stack member recovered, send an SNMP trap to the network manager.
             hgmpStackMemberStatusChange 1.3.6.1.4.1.2011.6.7.2.0.3
When a stack member status changed, send an SNMP trap to the network manager.
         hgmpStackMemberTableChange 1.3.6.1.4.1.2011.6.7.2.1 integer32 read-only
Change identifier of the stack member table. The default value is 0.
         hgmpStackMemberDisconRate 1.3.6.1.4.1.2011.6.7.2.2 integer32 read-only
Disconnection rate of the stack member switches. The default value is 0.
         hgmpMainLanswitchFlag 1.3.6.1.4.1.2011.6.7.2.3 integer read-write
Main switch flag. The default value is false(0). Enumeration: 'true': 1, 'false': 0.
         hgmpStackIpPoolStartIP 1.3.6.1.4.1.2011.6.7.2.4 ipaddress read-write
The first address of management IP network segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment. The default value is '0.0.0.0'.
         hgmpStackIpPoolLength 1.3.6.1.4.1.2011.6.7.2.5 integer32 read-write
The length of the management IP segment assigned by the master switch, which cannot be modified if there is IP address assignment. The default value is 17.
         hgmpStackMemberTable 1.3.6.1.4.1.2011.6.7.2.6 no-access
Stack member table.
             hgmpStackMemberEntry 1.3.6.1.4.1.2011.6.7.2.6.1 no-access
Provides information about the stack member entry.
                 hgmpStackMemberDeviceId 1.3.6.1.4.1.2011.6.7.2.6.1.1 octet string read-only
2 bytes address type of the switch + 2 bytes/0 + MAC address, comprising a hexadecimal number string.
                 hgmpStackMemberSerial 1.3.6.1.4.1.2011.6.7.2.6.1.2 integer32 read-only
When adding a member switch to the stack, the master switch will assign a unique integer to identify it.
                 hgmpStackMemberIpAddr 1.3.6.1.4.1.2011.6.7.2.6.1.3 ipaddress read-only
The private member IP address for the communication inside the stack.
                 hgmpStackMemberName 1.3.6.1.4.1.2011.6.7.2.6.1.4 octet string read-only
Hostname of the member switch.
                 hgmpStackMemberPassword 1.3.6.1.4.1.2011.6.7.2.6.1.5 octet string read-only
Member password for joining a stack.
                 hgmpStackMemberPlatform 1.3.6.1.4.1.2011.6.7.2.6.1.6 octet string read-only
Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.
                 hgmpStackMemberStatus 1.3.6.1.4.1.2011.6.7.2.6.1.7 integer read-only
Member status on the master switch, used for displaying the network management status. The default value is fault. Enumeration: 'fault': 1, 'normal': 0.
                 hgmpStackMemberDisconCount 1.3.6.1.4.1.2011.6.7.2.6.1.8 integer32 read-only
Count of inside communication disconnections between the member switch and the main switch.
                 hgmpStackMemberEnrollTime 1.3.6.1.4.1.2011.6.7.2.6.1.9 integer32 read-only
Enrollment time of the member, measured in seconds.
         hgmpStackRole 1.3.6.1.4.1.2011.6.7.2.7 integer read-only
Role of this switch in a stack. The default value is roleCASW(16). Enumeration: 'roleMEMBERSW': 2, 'roleUNISW': 17, 'roleBAKSW': 3, 'roleCASW': 16, 'roleCMDSW': 1.
         hgmpStackMaxPoolNum 1.3.6.1.4.1.2011.6.7.2.8 integer32 read-only
Maximum switch members in a stack that the switch supports (including the main switch).
         hgmpStackMainSwMac 1.3.6.1.4.1.2011.6.7.2.9 macaddress read-only
The MAC address of the main switch. It will be 00:00:00:00:00:00 when not a member of a stack.
         hgmpStackIpPoolMask 1.3.6.1.4.1.2011.6.7.2.10 ipaddress read-write
The mask of the management IP segment assigned by the master switch, which cannot be modified if there is IP address assignment. The default value is '255.255.0.0 '.
     hwNTDPObject 1.3.6.1.4.1.2011.6.7.4
         hgmpNTDPCollectTopTime 1.3.6.1.4.1.2011.6.7.4.1 integer32 read-write
Topology collection interval of the command switch of the cluster, measured in minutes. The default value is 0.
         hgmpNTDPHopRange 1.3.6.1.4.1.2011.6.7.4.2 integer32 read-write
Range of the topology collection of the command switch. The maximum value of this object may vary with different types of products.
         hgmpNTDPRun 1.3.6.1.4.1.2011.6.7.4.3 integer read-write
Status of the NTDP function. Enumeration: 'true': 1, 'false': 0.
         hgmpNTDPPortDelay 1.3.6.1.4.1.2011.6.7.4.4 integer32 read-write
Set the delay to forward the topology request via the ports, measured in milliseconds. The default value is 20.
         hgmpNTDPHopDelay 1.3.6.1.4.1.2011.6.7.4.5 integer32 read-write
Set the delay to forward the topology request from each hop, measured in milliseconds. The default value is 200.
         hgmpNTDPLastTopCollectDuration 1.3.6.1.4.1.2011.6.7.4.6 integer32 read-only
Duration of the latest overall topology collection, a performance count measured in milliseconds. The default value is 0.
         hgmpNTDPCacheChange 1.3.6.1.4.1.2011.6.7.4.7 integer32 read-only
Add 1 when the device table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again. The default value is 0.
         hgmpNTDPTOPTableChange 1.3.6.1.4.1.2011.6.7.4.8 integer32 read-only
Add 1 when the topology table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again. The default value is 0.
         hgmpNTDPInterfaceTable 1.3.6.1.4.1.2011.6.7.4.9 no-access
Status of NTDP function on the switch's port.
             hgmpNTDPInterfaceEntry 1.3.6.1.4.1.2011.6.7.4.9.1 no-access
Provides information about the NTDP function on the switch's port.
                 hgmpNTDPInterfaceIfIndex 1.3.6.1.4.1.2011.6.7.4.9.1.1 integer32 read-only
Unique identifier of an interface of the device.
                 hgmpNTDPInterfaceEnable 1.3.6.1.4.1.2011.6.7.4.9.1.2 integer read-write
If it is true, the device will send and receive the NTDP packets via the interface. To disable the NTDP function on the interface, set the entry to false(0). Enumeration: 'true': 1, 'false': 0.
         hgmpNTDPCacheTable 1.3.6.1.4.1.2011.6.7.4.10 no-access
Access information about the switch from the topology table.
               hgmpNTDPCacheEntry 1.3.6.1.4.1.2011.6.7.4.10.1 no-access
Provides information about the switch from the topology table.
                   hgmpNTDPCacheHashIndex 1.3.6.1.4.1.2011.6.7.4.10.1.1 integer32 read-only
NTDP information is saved in a HASH table on the command switch. Using DeviceID as an index will lead to the comparison of a large number of character strings, which puts too many burdens on the command switch. A HASHIndex is added to reduce the character string comparison to the least range.
                   hgmpNTDPCacheDeviceID 1.3.6.1.4.1.2011.6.7.4.10.1.2 octet string read-only
2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising as a character string of the hexadecimal number.
                   hgmpNTDPCacheClusterName 1.3.6.1.4.1.2011.6.7.4.10.1.3 octet string read-only
Name of the cluster including the device.
                   hgmpNTDPCacheClusterRole 1.3.6.1.4.1.2011.6.7.4.10.1.4 integer read-only
Cluster role of the current device, which can be a command switch(0X01), member switch(0X02), backup switch(0X03), candidate switch(0X10) or an independent switch(incapable of cluster member)(0X11). The default value is 17. Enumeration: 'roleMSW': 2, 'roleBKSW': 3, 'roleCOSW': 1, 'roleCASW': 16, 'roleUNISW': 17.
                   hgmpNTDPCacheCapabilities 1.3.6.1.4.1.2011.6.7.4.10.1.5 integer32 read-only
The capabilities of the device. Zero indicates that the field was not included in the latest NTDP packet. The default value is 0.
                   hgmpNTDPCacheVersion 1.3.6.1.4.1.2011.6.7.4.10.1.6 octet string read-only
The version information about the corresponding device. A null string indicates that the field was not included in the latest NTDP packet.
                   hgmpNTDPCachePlatform 1.3.6.1.4.1.2011.6.7.4.10.1.7 octet string read-only
Hardware platform. A null string indicates that the field was not included in the latest NTDP packet.
                   hgmpNTDPCacheMngVLAN 1.3.6.1.4.1.2011.6.7.4.10.1.8 integer32 read-only
The management VLAN ID of a device. The default value is 1.
                   hgmpNTDPCacheHop 1.3.6.1.4.1.2011.6.7.4.10.1.9 integer32 read-only
Hops to this switch.
         hgmpNTDPTopTable 1.3.6.1.4.1.2011.6.7.4.11 no-access
Access the topology structure collected by the NTDP.
               hgmpNTDPTopEntry 1.3.6.1.4.1.2011.6.7.4.11.1 no-access
Provides information about the topology structure collected by the NTDP.
                   hgmpNTDPTopHashIndex 1.3.6.1.4.1.2011.6.7.4.11.1.1 integer32 read-only
NTDP information is saved in a HASH table on the command switch. Using DeviceID as an index will lead to the comparison of a large number of character strings, which puts too many burdens on the command switch. A HASHIndex is added to reduce the character string comparison to the least range.
                   hgmpNTDPTopEdgeStartDevID 1.3.6.1.4.1.2011.6.7.4.11.1.2 octet string read-only
2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising a character string of the hexadecimal number.
                   hgmpNTDPTopEdgeIndex 1.3.6.1.4.1.2011.6.7.4.11.1.3 integer32 read-only
Edge index of this entry in the data structure.
                   hgmpNTDPTopEdgeEndDevID 1.3.6.1.4.1.2011.6.7.4.11.1.4 octet string read-only
2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising a character string of the hexadecimal number.
                   hgmpNTDPTopEdgeStartPort 1.3.6.1.4.1.2011.6.7.4.11.1.5 octet string read-only
The number of the first port of a topology edge. Interface type + card number / slot number / sequence number.
                   hgmpNTDPTopEdgeStartPortFullDuplex 1.3.6.1.4.1.2011.6.7.4.11.1.6 integer read-only
The full-duplex status of the first port on a topology edge. The default value is half. Enumeration: 'auto': 3, 'full': 1, 'half': 2.
                   hgmpNTDPTopEdgeStartPortSpeed 1.3.6.1.4.1.2011.6.7.4.11.1.7 integer32 read-only
The speed of the first port on a topology edge. The default value is 0.
                   hgmpNTDPTopEdgeEndPort 1.3.6.1.4.1.2011.6.7.4.11.1.8 octet string read-only
The number of the last port of a topology edge. Interface type + card number / slot number / sequence number.
                   hgmpNTDPTopEdgeStartPortIfIndex 1.3.6.1.4.1.2011.6.7.4.11.1.9 integer32 read-only
The interface index of the start port.
                   hgmpNTDPTopEdgeEndPortIfIndex 1.3.6.1.4.1.2011.6.7.4.11.1.10 integer32 read-only
The iterface index of the end port.
         hgmpNTDPExplore 1.3.6.1.4.1.2011.6.7.4.12 integer read-write
The value of this object identifies whether to start collecting topology information. 1 indicates to start collecting topology information. 0 is the default value, indicating doing nothing. The get operation always returns 0. Enumeration: 'start': 1, 'invalid': 0.
         hgmpNTDPTopoLinkTable 1.3.6.1.4.1.2011.6.7.4.13 no-access
This object indicates the topology link table collected using NTDP.
               hgmpNTDPTopoLinkEntry 1.3.6.1.4.1.2011.6.7.4.13.1 no-access
This object indicates the topology link information collected using NTDP.
                   hgmpNTDPTopoLocalDeviceID 1.3.6.1.4.1.2011.6.7.4.13.1.1 octet string no-access
This object indicates the ID of the local device. This ID is a hexadecimal string that comprises 2 bytes address type of the member switch, 2 bytes /0, and MAC address.
                   hgmpNTDPTopoLocalPortName 1.3.6.1.4.1.2011.6.7.4.13.1.2 octet string no-access
This object indicates the name of the local port.
                   hgmpNTDPTopoNbrDeviceID 1.3.6.1.4.1.2011.6.7.4.13.1.3 octet string no-access
This object indicates the ID of the neighbor device. This ID is a hexadecimal string that comprises 2 bytes address type of the member switch, 2 bytes /0, and MAC address.
                   hgmpNTDPTopoNbrPortName 1.3.6.1.4.1.2011.6.7.4.13.1.4 octet string no-access
This object indicates the name of the neighbor port.
                   hgmpNTDPTopoLinkStatus 1.3.6.1.4.1.2011.6.7.4.13.1.5 integer read-only
This object indicates the topology link status. Enumeration: 'active': 1.
         hgmpNTDPNotifications 1.3.6.1.4.1.2011.6.7.4.14
               hgmpNTDPTopoChange 1.3.6.1.4.1.2011.6.7.4.14.1
This object indicates that an SNMP trap is sent to the NMS when the NTDP topology is changed.
     hwNDPObject 1.3.6.1.4.1.2011.6.7.5
         hwNDPStatus 1.3.6.1.4.1.2011.6.7.5.1 integer read-write
NDP protocol module enable flag. Enumeration: 'enable': 1, 'disable': 0.
         hwNDPHelloTimer 1.3.6.1.4.1.2011.6.7.5.2 integer32 read-write
NDP packet transmission interval, measured in seconds. The default value is 60.
         hwNDPAgingTime 1.3.6.1.4.1.2011.6.7.5.3 integer32 read-write
How long NDP information about the local switch can be hold in the adjacent switch, measured in seconds. The default value is 180.
         hwNDPChange 1.3.6.1.4.1.2011.6.7.5.4 counter32 read-only
Change identifier of the Neighbor table.
         hwNDPPortTable 1.3.6.1.4.1.2011.6.7.5.5 no-access
Status of NDP function on the switch's port.
             hwNDPPortEntry 1.3.6.1.4.1.2011.6.7.5.5.1 no-access
Provides information about the NDP function on the switch's port.
                 hwNDPIfIndex 1.3.6.1.4.1.2011.6.7.5.5.1.1 integer32 read-only
Unique identifier of an interface of the device.
                 hwNDPPortStatus 1.3.6.1.4.1.2011.6.7.5.5.1.2 integer read-write
If it is enabled, the device will send and receive NDP packets via the interface. To disable the NDP function on the interface, set the entry to false(0). Enumeration: 'enable': 1, 'disable': 0.
         hwNDPPortNbTable 1.3.6.1.4.1.2011.6.7.5.6 no-access
Table of NDP neighbor information.
             hwNDPPortNbEntry 1.3.6.1.4.1.2011.6.7.5.6.1 no-access
Provides neighbor information about NDP.
                 hwNDPPortNbDeviceId 1.3.6.1.4.1.2011.6.7.5.6.1.1 octet string read-only
2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising a character string of the hexadecimal number.
                 hwNDPPortNbPortName 1.3.6.1.4.1.2011.6.7.5.6.1.2 octet string read-only
Unique identifier of a port. A null string indicates that the field was not included in the latest NDP packet. Interface type + card number / slot number / sequence number.
                 hwNDPPortNbDeviceName 1.3.6.1.4.1.2011.6.7.5.6.1.3 octet string read-only
Device name. A null string indicates that the field was not included in the latest NDP packet.
                 hwNDPPortNbPortMode 1.3.6.1.4.1.2011.6.7.5.6.1.4 integer read-only
The neighbor port duplex mode. Enumeration: 'auto': 3, 'full': 1, 'half': 2.
                 hwNDPPortNbProductVer 1.3.6.1.4.1.2011.6.7.5.6.1.5 octet string read-only
Product version. A null string indicates that the field was not included in the latest NDP packet.
                 hwNDPPortNbHardVer 1.3.6.1.4.1.2011.6.7.5.6.1.6 octet string read-only
Hardware version. A null string indicates that the field was not included in the latest NDP packet.
                 hwNDPPortNbBootromVer 1.3.6.1.4.1.2011.6.7.5.6.1.7 octet string read-only
Bootrom version. A null string indicates that the field was not included in the latest NDP packet.
                 hwNDPPortNbSoftVer 1.3.6.1.4.1.2011.6.7.5.6.1.8 octet string read-only
Software version. A null string indicates that the field was not included in the latest NDP packet.
                 hwNDPPortNbAgingtime 1.3.6.1.4.1.2011.6.7.5.6.1.9 integer32 read-only
How long NDP information about the local switch can be hold in the adjacent switch, measured in seconds.
         hwNDPTrunkMemberEnable 1.3.6.1.4.1.2011.6.7.5.7 enabledstatus read-write
The value of this object identifies whether to enable neighbor discovery on trunk member interfaces.
     hwClusterConformance 1.3.6.1.4.1.2011.6.7.6
         hwClusterGroups 1.3.6.1.4.1.2011.6.7.6.1
             currentObjectGroup 1.3.6.1.4.1.2011.6.7.6.1.1
Enter the description of the created OBJECT-GROUP.
             currentNotificationGroup 1.3.6.1.4.1.2011.6.7.6.1.2
Enter the description of the created NOTIFICATION-GROUP.
         hwClusterCompliances 1.3.6.1.4.1.2011.6.7.6.2
             basicCompliance 1.3.6.1.4.1.2011.6.7.6.2.1
Enter the description of the created MODULE-COMPLIANCE.