HUAWEI-CPE-MGMT-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-CPE-MGMT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, HUAWEI-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwCpeMgmt 1.3.6.1.4.1.2011.6.106
huawei cpe management mib.
         hwCpeMgmtPara 1.3.6.1.4.1.2011.6.106.1
             hwCpeMgmtIpAddr 1.3.6.1.4.1.2011.6.106.1.1 ipaddress read-write
IP address of CPE terminal. DSLAM uses this IP address to connect to CPE terminal.
             hwCpeMgmtVpi 1.3.6.1.4.1.2011.6.106.1.2 integer read-write
VPI of terminal management channel. It is necessary to config VPI/VCI value when establish management channel.
             hwCpeMgmtVci 1.3.6.1.4.1.2011.6.106.1.3 integer read-write
VCI of terminal management channel. It is necessary to config VPI/VCI value when establish management channel.
             hwCpeMgmtDslamVlan 1.3.6.1.4.1.2011.6.106.1.4 integer read-write
VLAN ID of DSLAM's VLAN interface. It is necessary to config VLAN ID value when establish management channel.
             hwCpeMgmtCpeVlan 1.3.6.1.4.1.2011.6.106.1.5 integer read-write
VLAN ID of VDSL CPE's management VLAN. It is necessary to config VLAN ID value when establish management channel.
             hwCpeMgmtFlowType 1.3.6.1.4.1.2011.6.106.1.6 integer read-write
Flow type of VDSL CPE's management VLAN. 1 cpevlan 2 vlanethertype 3 vlan8021p Enumeration: 'cpevlan': 1, 'vlanethertype': 2, 'vlan8021p': 3.
             hwCpeMgmtFlowPara 1.3.6.1.4.1.2011.6.106.1.7 integer read-write
Flow parameter of VDSL CPE's management flow. hwCpeMgmtFlowTypeȡֵΪ1(cpevlan)ʱڵȡֵЧ hwCpeMgmtFlowTypeȡֵΪ2(vlanethertype)ʱڵΪûװͣȡֵΧΪ1 pppoe2 ipoe hwCpeMgmtFlowTypeȡֵΪ3(vlan8021p)ʱڵΪ802.1pûȼȡֵΧΪ07
         hwCpeSelect 1.3.6.1.4.1.2011.6.106.2
             hwCpeFrameIndex 1.3.6.1.4.1.2011.6.106.2.1 integer read-write
Terminal's frame ID
             hwCpeSlotIndex 1.3.6.1.4.1.2011.6.106.2.2 integer read-write
Terminal's slot ID
             hwCpePortIndex 1.3.6.1.4.1.2011.6.106.2.3 integer read-write
Terminal's port ID
             hwCpeMgmtOper 1.3.6.1.4.1.2011.6.106.2.4 integer read-write
Operation of terminal management: 1 - terminal management start 2 - terminal management end NMS starts telnet to CPE terminal from here. User only need Start operation if he want to telnet to CPE terminal. User need both Start operation and Stop operation if he want to update files to CPE terminal. Enumeration: 'start': 1, 'stop': 2.
         hwCpeUpgrade 1.3.6.1.4.1.2011.6.106.3
             hwCpeLoadServerIpAddr 1.3.6.1.4.1.2011.6.106.3.1 ipaddress read-write
Server IP address. DSLAM download files from this server.
             hwCpeLoadProtocol 1.3.6.1.4.1.2011.6.106.3.2 integer read-write
Load protocol: 1 - TFTP mode 2 - FTP mode 3 - SFTP mode 4 - Other mode User can choose TFTP,FTP or SFTP mode to transfer files. The third transfer mode is used to extend. Enumeration: 'ftp': 2, 'tftp': 1, 'other': 4, 'sftp': 3.
             hwCpeLoadFileName 1.3.6.1.4.1.2011.6.106.3.3 octet string read-write
Name of file to be loaded. Absolute path is needed if the file is not in the default path of FTP/TFTP server.
             hwCpeLoadUserName 1.3.6.1.4.1.2011.6.106.3.4 octet string read-write
User name,use to visit FTP server. User name is not needed if TFTP protocol is used. This value will be discarded if TFTP protocol is used.
             hwCpeLoadPassword 1.3.6.1.4.1.2011.6.106.3.5 octet string read-write
Password,use to visit FTP server. Password is not needed if TFTP protocol is used. This value will be discarded if TFTP protocol is used.
             hwCpeLoadAdminStatus 1.3.6.1.4.1.2011.6.106.3.6 integer read-write
Load operation 1 - Start loading operation 2 - Stop loading operation NMS start update files from here. Enumeration: 'start': 1, 'stop': 2.
             hwCpeLoadOperStatus 1.3.6.1.4.1.2011.6.106.3.7 integer read-only
Load result: 1 - No load operation 2 - Wait to load 3 - Geting to dslam 4 - Putting to cpe 5 - Get to dslam fail 6 - Put to cpe fail DSLAM return loading result to NMS by this node. Enumeration: 'puttingToCpe': 4, 'getingToDslam': 3, 'putToCpeFail': 6, 'noLoadOperation': 1, 'ready': 2, 'getToDslamFail': 5.
             hwCpeLoadFileType 1.3.6.1.4.1.2011.6.106.3.8 integer read-write
File Type: 1 - software of CPE 2 - configuration file 3 - other file ؽ 1 - ļ 2 - ļ 3 - ļ Enumeration: 'image': 1, 'otherfile': 3, 'cfgfile': 2.
             hwCpeLoadServerPort 1.3.6.1.4.1.2011.6.106.3.9 integer read-write
Cpe load server port in SFTP mode Default: 22
         hwBatchCpeSelectTable 1.3.6.1.4.1.2011.6.106.4 no-access
Cpe Batch Management Table(the max record number is 1024)
             hwBatchCpeSelectEntry 1.3.6.1.4.1.2011.6.106.4.1 no-access
Cpe Batch Management Table Entity
                 hwBatchCpeFrameIndex 1.3.6.1.4.1.2011.6.106.4.1.1 integer no-access
Terminal's frame ID նڵĿ
                 hwBatchCpeSlotIndex 1.3.6.1.4.1.2011.6.106.4.1.2 integer no-access
Terminal's slot ID նڵIJλ
                 hwBatchCpePortIndex 1.3.6.1.4.1.2011.6.106.4.1.3 integer no-access
Terminal's port ID նڵĶ˿ں
                 hwBatchCpeid 1.3.6.1.4.1.2011.6.106.4.1.4 integer no-access
Terminal's ID նid,ontid,0-63
                 hwBatchCpeAdminStatus 1.3.6.1.4.1.2011.6.106.4.1.5 integer read-only
Terminal's current loading status ն˵ǰļ״̬ ܿͨѯҶ˽⵱ǰضն˵ļ״̬ Load result: 1 - prepare to load 2 - loading 3 - loadsuccess 4 - loadfail DSLAM return loading result to NMS by this node. ؽ 1 -׼ 2 -ڼ 3 -سɹ 4 -ʧ Enumeration: 'loadfail': 4, 'loading': 2, 'loadsuccess': 3, 'prepareToLoad': 1.
                 hwBatchCpeRowStatus 1.3.6.1.4.1.2011.6.106.4.1.6 integer read-write
Operation of terminal management: ն˹ createAndGo(4), - Ѵն˼ն delete(6) - ѴնƳն ͨ createAndGo ննС Ѿstart󣬲ٰն˼Ƴն Enumeration: 'createAndGo': 4, 'delete': 6.
                 hwBatchCpeLoadProgress 1.3.6.1.4.1.2011.6.106.4.1.7 integer read-only
display ont load progress ONTؽȲѯ ȡֵ[0, 100]