HUAWEI-CES-MIB: View SNMP OID List / Download MIB
VENDOR: HUAWEI
Home | MIB: HUAWEI-CES-MIB | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
hwCes | 1.3.6.1.4.1.2011.5.11 |
The MIB is used for defining Huawei's CES management MIB objects, which provides CES management NMS interfaces. |
||
hwAtmCesServDescrExtTable | 1.3.6.1.4.1.2011.5.11.1 | no-access |
CES service description extended table. This table is used during the creation of the connection between the CES-SDT port and the CES-V35 port. The index of this table is ifIndex. |
|
1.3.6.1.4.1.2011.5.11.1.1 | no-access |
CES service description extended table. This table is used during the creation of the connection between the CES-SDT port and the CES-V35 port. The index of this entry is ifIndex. |
||
hwAtmCesServDescrExtNValue | 1.3.6.1.4.1.2011.5.11.1.1.1 | integer32 | read-only |
The N value of V35 port. |
hwAtmCesServDescrExtBitMap | 1.3.6.1.4.1.2011.5.11.1.1.2 | unsigned32 | read-only |
The timeslot bitmap in SDT mode. |
hwAtmCesServDescrExtFillRate | 1.3.6.1.4.1.2011.5.11.1.1.3 | integer32 | read-only |
The fillrate of cell. |
hwAtmCesServDescrExtRowStatus | 1.3.6.1.4.1.2011.5.11.1.1.4 | rowstatus | read-only |
This object is used to create a new row or modify or delete an existing row in this table. createAndGo(4),destroy(6) |
hwAtmCesCfgTable | 1.3.6.1.4.1.2011.5.11.2 | no-access |
CES board configration table. The indexes of this table are hwFrameIndex and hwSlotIndex. |
|
1.3.6.1.4.1.2011.5.11.2.1 | no-access |
CES board configration table. The indexes of this entry are hwFrameIndex and hwSlotIndex. |
||
hwAtmCesCfgWorkMode | 1.3.6.1.4.1.2011.5.11.2.1.1 | integer | read-write |
CES board working mode. Options: 1. tdm(1) - CES board working mode is tdm 2. e1(2) - CES board working mode is e1 3. v35(3) - CES board working mode is v35 4. idle(4) - CES board working mode is idle 5. indep(5) - CES board working mode is indep Enumeration: 'indep': 5, 'idle': 4, 'e1': 2, 'v35': 3, 'tdm': 1. |
hwAtmCesCfgDDNClockMode | 1.3.6.1.4.1.2011.5.11.2.1.2 | integer | read-write |
The DDN clock mode of CES board. Options: 1. line(1) - The DDN clock mode of CES board is line 2. srts(2) - The DDN clock mode of CES board is srts Enumeration: 'srts': 2, 'line': 1. |
hwAtmCesCfgDDNClockSrcPort | 1.3.6.1.4.1.2011.5.11.2.1.3 | integer32 | read-write |
The DDN clock source of CES board. |
hwAtmCesCfgE1GroupType0 | 1.3.6.1.4.1.2011.5.11.2.1.4 | integer | read-write |
E1 Group 0 (port 0~3) work mode. Options: 1. cesE1(1) - E1 work mode is cesE1 2. tdmE1(2) - E1 work mode is tdmE1 3. ddnE1(3) - E1 work mode is ddnE1 Enumeration: 'ddnE1': 3, 'tdmE1': 2, 'cesE1': 1. |
hwAtmCesCfgE1GroupType1 | 1.3.6.1.4.1.2011.5.11.2.1.5 | integer | read-write |
E1 Group 1 (port 4~7) work mode. Options: 1. cesE1(1) - E1 work mode is cesE1 2. tdmE1(2) - E1 work mode is tdmE1 3. ddnE1(3) - E1 work mode is ddnE1 Enumeration: 'ddnE1': 3, 'tdmE1': 2, 'cesE1': 1. |
hwAtmCesCfgE1GroupType2 | 1.3.6.1.4.1.2011.5.11.2.1.6 | integer | read-write |
E1 Group 2 (port 8~11) work mode. Options: 1. cesE1(1) - E1 work mode is cesE1 2. tdmE1(2) - E1 work mode is tdmE1 3. ddnE1(3) - E1 work mode is ddnE1 Enumeration: 'ddnE1': 3, 'tdmE1': 2, 'cesE1': 1. |
hwAtmCesCfgE1GroupType3 | 1.3.6.1.4.1.2011.5.11.2.1.7 | integer | read-write |
E1 Group 3 (port 12~15) work mode. Options: 1. cesE1(1) - E1 work mode is cesE1 2. tdmE1(2) - E1 work mode is tdmE1 3. ddnE1(3) - E1 work mode is ddnE1 Enumeration: 'ddnE1': 3, 'tdmE1': 2, 'cesE1': 1. |
hwAtmCesCfgAccessMode | 1.3.6.1.4.1.2011.5.11.2.1.8 | integer | read-write |
Board work mode. Options: 1. e1(1) - E1 2. t1(2) - T1 Enumeration: 'e1': 1, 't1': 2. |
hwAtmCesPortCfgTable | 1.3.6.1.4.1.2011.5.11.3 | no-access |
Port configration table of CES board. The table is used to port configration of CES board. The index of this table is ifIndex. |
|
1.3.6.1.4.1.2011.5.11.3.1 | no-access |
Port configration table of CES board. The table is used to port configration of CES board. The index of this entry is ifIndex. |
||
hwAtmCesPortCfgWorkMode | 1.3.6.1.4.1.2011.5.11.3.1.1 | integer | read-write |
The working mode of port. Options: 1. uni(1) - UNI mode 2. sdt(2) - SDT mode 3. udt(3) - UDT mode 4. idle(4) - Idle mode 5. ima(5) - IMA mode 6. invalidMode(-1) - Invalid mode Enumeration: 'sdt': 2, 'ima': 5, 'udt': 3, 'invalidMode': -1, 'idle': 4, 'uni': 1. |
hwAtmCesPortCfgClockMode | 1.3.6.1.4.1.2011.5.11.3.1.2 | integer | read-write |
The clock mode of port. Options: 1. system(1) - System clock 2. line(2) - Line clock 3. acm(3) - Acm clock 4. srts(4) - Srts clock 5. invalidClock(-1) - Invalid clock Enumeration: 'srts': 4, 'invalidClock': -1, 'line': 2, 'system': 1, 'acm': 3. |
hwAtmCesPortCfgSignalType | 1.3.6.1.4.1.2011.5.11.3.1.3 | integer | read-write |
Signal type of port. Options: 1. ccs(1) - CCS signal 2. cas(2) - CAS signal 3. invalidSignal(-1) - Invalid signal Enumeration: 'cas': 2, 'invalidSignal': -1, 'ccs': 1. |
hwAtmCesPortCfgFrameVerifyMode | 1.3.6.1.4.1.2011.5.11.3.1.4 | integer | read-write |
Frame verify mode of port. Options: 1. enable(1) - Open frame verify 2. disable(2) - Close frame verify 3. invalidOrNotSupport(-1) - Invalid or does not support frame verify Enumeration: 'enable': 1, 'invalidOrNotSupport': -1, 'disable': 2. |
hwAtmCesPortTimeSlotBMP | 1.3.6.1.4.1.2011.5.11.3.1.5 | unsigned32 | read-only |
Timeslot bitmap of port, 0 is the initial value of timeslot bitmap. |
hwAtmCesPortCfgWarningStatus | 1.3.6.1.4.1.2011.5.11.3.1.6 | unsigned32 | read-only |
Alarm state of port. |
hwAtmCesPortCfgUtopiaStatus | 1.3.6.1.4.1.2011.5.11.3.1.7 | integer | read-only |
UTOPIA port state. Options: 1. normal(1) - Normal state 2. test(2) - Test state 3. idle(3) - Idle state 4. notExist(4) - Does not exist 5. fail(5) - Fail state 6. block(6) - Block state Enumeration: 'normal': 1, 'notExist': 4, 'test': 2, 'idle': 3, 'fail': 5, 'block': 6. |
hwAtmCesPortCfgLiuStatus | 1.3.6.1.4.1.2011.5.11.3.1.8 | integer | read-only |
LIU port state. Options: 1. normal(1) - Normal state 2. test(2) - Test state 3. idle(3) - Idle state 4. notExisted(4) - Does not exist 5. fail(5) - Fail state 6. block(6) - Block state 7. maintain(7) - Maintain state 8. localLoop(11) - Local-loop state 9. remoteLoop(12) - Remote-loop state 10. tsLocalLoop(13) - ts-Localloop state 11. payLoadLoop(14) - Payload-loop state 12. invalidStatus(-1) - Invalid state Enumeration: 'notExisted': 4, 'tsLocalLoop': 13, 'normal': 1, 'payLoadLoop': 14, 'idle': 3, 'remoteLoop': 12, 'test': 2, 'invalidStatus': -1, 'maintain': 7, 'fail': 5, 'localLoop': 11, 'block': 6. |
hwAtmCesPortCfgImpedance | 1.3.6.1.4.1.2011.5.11.3.1.9 | integer | read-write |
Impedance of port. Options: 1. ohm75(1) - 75 ohm 2. ohm120(2) - 120 ohm 3. ohm100(3) - 100 ohm 4. invalidImpedance(-1) - Invalid impedance Enumeration: 'ohm100': 3, 'ohm75': 1, 'ohm120': 2, 'invalidImpedance': -1. |
hwAtmCesPortCfgPhyState | 1.3.6.1.4.1.2011.5.11.3.1.10 | integer | read-only |
E1 port physical state. Options: 1. normal(0) - Normal state 2. fault(1) - Fault state 3. unknown(2) - Unknown state Enumeration: 'fault': 1, 'normal': 0, 'unknown': 2. |
hwAtmCesPortCfgLoopLineState | 1.3.6.1.4.1.2011.5.11.3.1.11 | integer | read-only |
E1 port line state. Options: 1. synchronized(0) - Synchronized state 2. farEndAlarm(1) - Far-End-Alarm state 3. nearEndAlarm(2) - Near-End-Alarm state 4. testing(3) - Testing state 5. unknown(4) - Unknown state Enumeration: 'nearEndAlarm': 2, 'unknown': 4, 'farEndAlarm': 1, 'testing': 3, 'synchronized': 0. |
hwAtmCesPortCfgE1Frametype | 1.3.6.1.4.1.2011.5.11.3.1.12 | integer | read-write |
pvm-e1 port frame type. Options: 1. pcm31(1) - PCM31 frame 2. unframe(2) - It's not a frame Enumeration: 'pcm31': 1, 'unframe': 2. |
hwAtmCesPortAdminStatus | 1.3.6.1.4.1.2011.5.11.3.1.13 | integer | read-write |
Port operation type. Options: 1. reset(1) - Reset port 2. selfcheck(2) - Self check Enumeration: 'reset': 1, 'selfcheck': 2. |
hwAtmCesPCMErrorReportAlarm | 1.3.6.1.4.1.2011.5.11.3.1.14 | unsigned32 | read-only |
PCM error report configuration. bit0: report alarm when pcm line fault occurs; bit1: set PCM fault and set port to OOS state when ULF exceeds the threshold; bit2: set PCM fault and set port to OOS state when OLF exceeds the threshold; bit3: report event when LDT exceeds the threshold; bit4: report event when frame slip exceeds the threshold; bit5: report event when line temporary disturb occurs. |
hwAtmCesPortCfgESAlarmThreshold | 1.3.6.1.4.1.2011.5.11.3.1.15 | integer32 | read-write |
Errored seconds alarm threshold. |
hwAtmCesPortCfgCSESAlarmThreshold | 1.3.6.1.4.1.2011.5.11.3.1.16 | integer32 | read-write |
Consecutive severely errored seconds alarm threshold. |
hwAtmCesPortCfgDMAlarmThreshold | 1.3.6.1.4.1.2011.5.11.3.1.17 | integer32 | read-write |
Degraded minutes alarm threshold. |
hwAtmCesPortLineCode | 1.3.6.1.4.1.2011.5.11.3.1.18 | integer | read-write |
Configuration of the line encoding type. Options: 1. hdb3(1) - HDB3 code 2. ami(2) - AMI code 3. b8zs(3) - B8ZS code 4. invalidCode(-1) - Invalid code Enumeration: 'ami': 2, 'b8zs': 3, 'invalidCode': -1, 'hdb3': 1. |
hwAtmCesPortAcmSource | 1.3.6.1.4.1.2011.5.11.3.1.19 | integer32 | read-write |
Configuration of adaptive clock source. |
hwAtmCesPortCfgState | 1.3.6.1.4.1.2011.5.11.3.1.20 | integer | read-only |
Indicates the configuration status of the subscriber type. Options: 1. notConfigUserType(1) - Did not configure 2. configVoiceUserType(2) - Configured MG PRA subscriber 3. configPWUserType(3) - Configured Connection user 4. configNativeTDM(4) - Configured Native TDM Enumeration: 'notConfigUserType': 1, 'configVoiceUserType': 2, 'configNativeTDM': 4, 'configPWUserType': 3. |
hwAtmCesPortV35CfgTable | 1.3.6.1.4.1.2011.5.11.4 | no-access |
Port configration table of V35. This table is used to configure the CES-V35 port. The configuration includes reversing the clock and clock mode, blocking and unblocking the port, and querying the N value, status and alarm of the port. The index of this table is ifIndex. |
|
1.3.6.1.4.1.2011.5.11.4.1 | no-access |
Port configration table of V35. This table is used to configure the CES-V35 port. The configuration includes reversing the clock and clock mode, blocking and unblocking the port, and querying the N value, status and alarm of the port. The index of this entry is ifIndex. |
||
hwAtmCesPortV35CfgNValue | 1.3.6.1.4.1.2011.5.11.4.1.1 | integer32 | read-only |
N value of V35 port. |
hwAtmCesPortV35CfgClockMode | 1.3.6.1.4.1.2011.5.11.4.1.2 | integer | read-write |
Clock mode of port. Options: 1. dceInternal(1) - Dec-Internal clock 2. dceSlave(2) - Dec-Slave clock 3. dceExternal(3) - Dec-External clock 4. dteInternal(4) - Dte-Internal clock 5. dteSlave(5) - Dte-Slave clock 6. dteExternal(6) - Dte-External clock Enumeration: 'dceSlave': 2, 'dteSlave': 5, 'dceInternal': 1, 'dteExternal': 6, 'dteInternal': 4, 'dceExternal': 3. |
hwAtmCesPortV35CfgBlockStatus | 1.3.6.1.4.1.2011.5.11.4.1.3 | integer | read-write |
To block or unblock the port, or to inquiry the block state. Options: 1. block(1) - Block the port 2. unblock(2) - UnBlock the port 3. invalidStatus(-1) - Invalid status Enumeration: 'invalidStatus': -1, 'unblock': 2, 'block': 1. |
hwAtmCesPortV35CfgReversePhase | 1.3.6.1.4.1.2011.5.11.4.1.4 | integer | read-write |
Inverse the clock of V35 port, inquiry the clock state. Options: 1. noInverse(1) - Not inverse state 2. inverse(2) - Inverse state Enumeration: 'noInverse': 1, 'inverse': 2. |
hwAtmCesPortV35CfgWarningStatus | 1.3.6.1.4.1.2011.5.11.4.1.5 | integer32 | read-only |
Alarm state of V35 port. |
hwAtmCesPortV35CfgPortV35Status | 1.3.6.1.4.1.2011.5.11.4.1.6 | integer | read-only |
Port state of V35. Options: 1. idle(1) - Idle state 2. normal(2) - Normal state 3. localLoop(3) - Local loop state 4. remoteLoop(4) - Remote loop state 5. block(5) - Block state 6. fault(6) - Fault state Enumeration: 'normal': 2, 'fault': 6, 'remoteLoop': 4, 'idle': 1, 'localLoop': 3, 'block': 5. |
hwAtmCesChnlStatisTable | 1.3.6.1.4.1.2011.5.11.5 | no-access |
The statistics table of CES channel. This table is used to collect the cell data of the SDT port. The index of this table is ifIndex. |
|
1.3.6.1.4.1.2011.5.11.5.1 | no-access |
The statistics table of CES channel. This table is used to collect the cell data of the SDT port. The index of this entry is ifIndex. |
||
hwAtmCesChnlStatisCounter0 | 1.3.6.1.4.1.2011.5.11.5.1.1 | counter32 | read-only |
Number of discarded cells due to Output Queue or Segmentation Buffer. |
hwAtmCesChnlStatisCounter1 | 1.3.6.1.4.1.2011.5.11.5.1.2 | counter32 | read-only |
Not used. |
hwAtmCesChnlStatisCounter2 | 1.3.6.1.4.1.2011.5.11.5.1.3 | counter32 | read-only |
Number of cells written to the Reassembly Buffer. It excludes cells that were discarded for any reason and cells that are inserted instead of lost cells (atmfReassembledCells). |
hwAtmCesChnlStatisCounter3 | 1.3.6.1.4.1.2011.5.11.5.1.4 | counter32 | read-only |
Number of times incomingMFB pulse is not synchronous to SDT start of structure upstream (AAL1). |
hwAtmCesChnlStatisCounter4 | 1.3.6.1.4.1.2011.5.11.5.1.5 | counter32 | read-only |
Number of cells causing a Reassembly Buffer overflow (AAL0 & AAL1). It includes accepted cells that are causing the filling level to exceed the predefined threshold and discarded cells due to the attempt of writing to the Reassembly Buffer when the threshold is already exceeded. |
hwAtmCesChnlStatisCounter5 | 1.3.6.1.4.1.2011.5.11.5.1.6 | counter32 | read-only |
Number of end of Reassembly Buffer overflow (AAL0 & AAL1). The value is incremented upon acceptance of the next cell after Reassembly Buffer overflow. |
hwAtmCesChnlStatisCounter6 | 1.3.6.1.4.1.2011.5.11.5.1.7 | counter32 | read-only |
The count of the number of AAL1 header errors detected including those corrected. Header errors include correctable and uncorrectable CRC, plus bad parity. (atmfCESHdrErrors). |
hwAtmCesChnlStatisCounter7 | 1.3.6.1.4.1.2011.5.11.5.1.8 | counter32 | read-only |
Number of times that the sequence number of an incoming AAL1 SARPDU causes a transition of the SC algorithm from 'sync' to 'out of sequence' and from 'invalid' to 'out of sync'. |
hwAtmCesChnlStatisCounter8 | 1.3.6.1.4.1.2011.5.11.5.1.9 | counter32 | read-only |
Number of downstream 'misinserted cells' detected by the AAL1 sequence count algorithm (atmfCESMisinsertedCells). |
hwAtmCesChnlStatisCounter9 | 1.3.6.1.4.1.2011.5.11.5.1.10 | counter32 | read-only |
Number of downstream cells discarded by the AAL1 sequence count algorithm. |
hwAtmCesChnlStatisCounter10 | 1.3.6.1.4.1.2011.5.11.5.1.11 | counter32 | read-only |
Number of rejected AAL1 SDT pointers due to parity error or wrong pointer value (93 < pointer <127). |
hwAtmCesChnlStatisCounter11 | 1.3.6.1.4.1.2011.5.11.5.1.12 | counter32 | read-only |
Number of SC cycles with more than one AAL1 SDT pointer field if only one pointer is expected (sdt_once = 1). |
hwAtmCesChnlStatisCounter12 | 1.3.6.1.4.1.2011.5.11.5.1.13 | counter32 | read-only |
Number of start of reassembly buffer underflow (AAL0 & AAL1) (atmfCESBufUnderflow). |
hwAtmCesChnlStatisCounter13 | 1.3.6.1.4.1.2011.5.11.5.1.14 | counter32 | read-only |
Number of inserted starvation cells (AAL0 & AAL1) due to reassembly buffer underflow. |
hwAtmCesChnlStatisCounter14 | 1.3.6.1.4.1.2011.5.11.5.1.15 | counter32 | read-only |
Number of times the Reassembly Buffer is re-initialized due to AAL1 start of structure is out of sync with port start of structure.This records the count of the number of events in which the AAL1 reassembler found that an SDT pointer is not where it is expected, and the pointer must be reacquired. This count is only meaningful for structured CES. (atmfCESPointerReframes). |
hwAtmCesChnlStatisCounter15 | 1.3.6.1.4.1.2011.5.11.5.1.16 | counter32 | read-only |
Number of downstream 'Lost cells' detected by the AAL1 sequence count algorithm (atmfCESLostCells). |
hwAtmCesChnlStatisOper | 1.3.6.1.4.1.2011.5.11.5.1.17 | integer | read-write |
The operating code of clearing the statistics of CES SDT port. Options: 1. clear(1) - Clear the statistics of CES SDT port Enumeration: 'clear': 1. |
hwAtmCesUDTPortStatisTable | 1.3.6.1.4.1.2011.5.11.6 | no-access |
The statistics table of CES UDT port. This table is used to collect the cell data of the UDT port. The index of this table is ifIndex. |
|
1.3.6.1.4.1.2011.5.11.6.1 | no-access |
The statistics table of CES UDT port. This table is used to collect the cell data of the UDT port. The index of this entry is ifIndex. |
||
hwAtmCesUDTPortStatisCounter0 | 1.3.6.1.4.1.2011.5.11.6.1.1 | counter32 | read-only |
Number of discarded cells due to Output Queue or Segmentation Buffer. |
hwAtmCesUDTPortStatisCounter1 | 1.3.6.1.4.1.2011.5.11.6.1.2 | counter32 | read-only |
Not used. |
hwAtmCesUDTPortStatisCounter2 | 1.3.6.1.4.1.2011.5.11.6.1.3 | counter32 | read-only |
Number of cells written to the Reassembly Buffer. It excludes cells that were discarded for any reason and cells that are inserted instead of lost cells (atmfReassembledCells). |
hwAtmCesUDTPortStatisCounter3 | 1.3.6.1.4.1.2011.5.11.6.1.4 | counter32 | read-only |
Number of times incomingMFB pulse is not synchronous to SDT start of structure upstream (AAL1). |
hwAtmCesUDTPortStatisCounter4 | 1.3.6.1.4.1.2011.5.11.6.1.5 | counter32 | read-only |
Number of cells causing a Reassembly Buffer overflow (AAL0 & AAL1). It includes accepted cells that are causing the filling level to exceed the predefined threshold and discarded cells due to the attempt of writing to the Reassembly Buffer when the threshold is already exceeded. |
hwAtmCesUDTPortStatisCounter5 | 1.3.6.1.4.1.2011.5.11.6.1.6 | counter32 | read-only |
Number of end of Reassembly Buffer overflow (AAL0 & AAL1). The value is incremented upon acceptance of the next cell after Reassembly Buffer overflow. |
hwAtmCesUDTPortStatisCounter6 | 1.3.6.1.4.1.2011.5.11.6.1.7 | counter32 | read-only |
The count of the number of AAL1 header errors detected including those corrected. Header errors include correctable and uncorrectable CRC, plus bad parity. (atmfCESHdrErrors). |
hwAtmCesUDTPortStatisCounter7 | 1.3.6.1.4.1.2011.5.11.6.1.8 | counter32 | read-only |
Number of times that the sequence number of an incoming AAL1 SARPDU causes a transition of the SC algorithm from 'sync' to 'out of sequence' and from 'invalid' to 'out of sync'. |
hwAtmCesUDTPortStatisCounter8 | 1.3.6.1.4.1.2011.5.11.6.1.9 | counter32 | read-only |
Number of downstream 'misinserted cells' detected by the AAL1 sequence count algorithm (atmfCESMisinsertedCells). |
hwAtmCesUDTPortStatisCounter9 | 1.3.6.1.4.1.2011.5.11.6.1.10 | counter32 | read-only |
Number of downstream cells discarded by the AAL1 sequence count algorithm. |
hwAtmCesUDTPortStatisCounter10 | 1.3.6.1.4.1.2011.5.11.6.1.11 | counter32 | read-only |
Number of rejected AAL1 SDT pointers due to parity error or wrong pointer value (93 < pointer <127). |
hwAtmCesUDTPortStatisCounter11 | 1.3.6.1.4.1.2011.5.11.6.1.12 | counter32 | read-only |
Number of SC cycles with more than one AAL1 SDT pointer field if only one pointer is expected (sdt_once = 1). |
hwAtmCesUDTPortStatisCounter12 | 1.3.6.1.4.1.2011.5.11.6.1.13 | counter32 | read-only |
Number of start of reassembly buffer underflow (AAL0 & AAL1) (atmfCESBufUnderflow). |
hwAtmCesUDTPortStatisCounter13 | 1.3.6.1.4.1.2011.5.11.6.1.14 | counter32 | read-only |
Number of inserted starvation cells (AAL0 & AAL1) due to reassembly buffer underflow. |
hwAtmCesUDTPortStatisCounter14 | 1.3.6.1.4.1.2011.5.11.6.1.15 | counter32 | read-only |
Number of times the Reassembly Buffer is re-initialized due to AAL1 start of structure is out of sync with port start of structure.This records the count of the number of events in which the AAL1 reassembler found that an SDT pointer is not where it is expected, and the pointer must be reacquired. This count is only meaningful for structured CES. (atmfCESPointerReframes). |
hwAtmCesUDTPortStatisCounter15 | 1.3.6.1.4.1.2011.5.11.6.1.16 | counter32 | read-only |
Number of downstream 'lost cells' detected by the AAL1 sequence count algorithm (atmfCESLostCells). |
hwAtmCesUDTPortStatisOper | 1.3.6.1.4.1.2011.5.11.6.1.17 | integer | read-write |
The operating code of clearing the statistics of CES UDT port. Options: 1. clear(1) - Clear the statistics of CES UDT port Enumeration: 'clear': 1. |
hwAtmCesUNIPortStatisTable | 1.3.6.1.4.1.2011.5.11.7 | no-access |
The statistics table of CES UNI port. This table is used to collect the cell data of the UNI port. The index of this table is ifIndex. |
|
1.3.6.1.4.1.2011.5.11.7.1 | no-access |
The statistics table of CES UNI port. This table is used to collect the cell data of the UNI port. The index of this entry is ifIndex. |
||
hwAtmCesUNIPortStatisCounter0 | 1.3.6.1.4.1.2011.5.11.7.1.1 | counter32 | read-only |
Number of discarded cells due to output queue, ATM Receive Buffer. |
hwAtmCesUNIPortStatisCounter1 | 1.3.6.1.4.1.2011.5.11.7.1.2 | counter32 | read-only |
Number of received cells with corrected HEC errors. |
hwAtmCesUNIPortStatisCounter2 | 1.3.6.1.4.1.2011.5.11.7.1.3 | counter32 | read-only |
Number of received cells with non-corrected HEC errors. |
hwAtmCesUNIPortStatisCounter3 | 1.3.6.1.4.1.2011.5.11.7.1.4 | counter32 | read-only |
Number of times cell delineation SYNC state is left, except when forced. |
hwAtmCesUNIPortStatisCounter4 | 1.3.6.1.4.1.2011.5.11.7.1.5 | counter32 | read-only |
Number of discarded cells due to ATM transmit buffer overflow. |
hwAtmCesUNIPortStatisOper | 1.3.6.1.4.1.2011.5.11.7.1.6 | integer | read-write |
The operating code of clearing the statistics of CES UNI port. Options: 1. clear(1) - Clear the statistics of CES UNI port Enumeration: 'clear': 1. |
hwAtmCesPortMaintTable | 1.3.6.1.4.1.2011.5.11.8 | no-access |
The maintenace table of CES port. This table is used to set the loopback of the CES port, including the local loopback (LL), remote loopback (RL), and timeslot loopback. The timeslot loopback takes effect only on the CES-SDT port. The index of this table is ifIndex. |
|
1.3.6.1.4.1.2011.5.11.8.1 | no-access |
The maintenace table of CES port. This table is used to set the loopback of the CES port, including the local loopback (LL), remote loopback (RL), and timeslot loopback. The timeslot loopback takes effect only on the CES-SDT port. The index of this entry is ifIndex. |
||
hwAtmCesPortMaintLoop | 1.3.6.1.4.1.2011.5.11.8.1.1 | integer | read-write |
The looping test mode of CES port. Options: 1. noLoop(1) - No-loop test 2. localLoop(2) - Local-loop test 3. remoteLoop(3) - Remote-loop test 4. tsLocalLoop(4) - Ts-Localloop test 5. payLoadLoop(5) - Payload-loop test Enumeration: 'tsLocalLoop': 4, 'noLoop': 1, 'localLoop': 2, 'remoteLoop': 3, 'payLoadLoop': 5. |
hwAtmCesPortMaintOper | 1.3.6.1.4.1.2011.5.11.8.1.2 | integer | read-write |
The oprating of looping test mode. Options: 1. set(1) - Set looping test 2. clear(2) - Clear looping test 3. notSupportQuery(-1) - Not support query Enumeration: 'clear': 2, 'set': 1, 'notSupportQuery': -1. |
hwAtmCesPortMaintSingleTimeslotId | 1.3.6.1.4.1.2011.5.11.8.1.3 | integer32 | read-write |
The timeslot number of single timeslot looping test. |
hwCesECSMonitorControlTable | 1.3.6.1.4.1.2011.5.11.11 | no-access |
E1 monitor status control table. The indexes of this table are ifIndex and hwCesECSMonitorPeriodType. |
|
1.3.6.1.4.1.2011.5.11.11.1 | no-access |
E1 monitor status control table. The indexes of this entry are ifIndex and hwCesECSMonitorPeriodType. |
||
hwCesECSMonitorPeriodType | 1.3.6.1.4.1.2011.5.11.11.1.1 | integer | read-write |
Monitor period type. Options: 1. quarter(1) - Quarter 2. day(2) - Day Enumeration: 'quarter': 1, 'day': 2. |
hwCesECSMonitorStatusReal | 1.3.6.1.4.1.2011.5.11.11.1.2 | integer | read-only |
Current monitor status, 0:disable, 1:enable. Options: 1. disable(0) - Disable current monitor 2. enable(1) - Enable current monitor Enumeration: 'enable': 1, 'disable': 0. |
hwCesECSMonitorStartTimeReal | 1.3.6.1.4.1.2011.5.11.11.1.3 | dateandtime | read-only |
The start time of the monitor. |
hwCesECSMonitorStatusUserSet | 1.3.6.1.4.1.2011.5.11.11.1.4 | integer | read-write |
The monitor status set by user. Options: 1. disable(0) - Set monitor close 2. enable(1) - Set monitor open Enumeration: 'enable': 1, 'disable': 0. |
hwCesECSMonitorStartTimeUserSet | 1.3.6.1.4.1.2011.5.11.11.1.5 | dateandtime | read-write |
The start time of the monitor set by user. |
hwCesECSThresholdControlTable | 1.3.6.1.4.1.2011.5.11.12 | no-access |
E1 threshold enable table. The indexes of this table are ifIndex and hwCesECSMonitorPeriodType. |
|
1.3.6.1.4.1.2011.5.11.12.1 | no-access |
E1 threshold enable table. The indexes of this entry are ifIndex and hwCesECSMonitorPeriodType. |
||
hwCesECSThresholdEnabled | 1.3.6.1.4.1.2011.5.11.12.1.1 | integer | read-write |
E1 threshold enable. Options: 1. disable(0) - Disable the E1 threshold 2. enable(1) - Enable the E1 threshold Enumeration: 'enable': 1, 'disable': 0. |
hwCesECSThresholdTable | 1.3.6.1.4.1.2011.5.11.13 | no-access |
E1 monitor threshold table. The indexes of this table are ifIndex and hwCesECSMonitorPeriodType. |
|
1.3.6.1.4.1.2011.5.11.13.1 | no-access |
E1 monitor threshold table. The indexes of this entry are ifIndex and hwCesECSMonitorPeriodType. |
||
hwCesECSThresholdLowES | 1.3.6.1.4.1.2011.5.11.13.1.1 | gauge32 | read-write |
Errored seconds low threshold. |
hwCesECSThresholdHighES | 1.3.6.1.4.1.2011.5.11.13.1.2 | gauge32 | read-write |
Errored seconds high threshold. |
hwCesECSThresholdSES | 1.3.6.1.4.1.2011.5.11.13.1.3 | gauge32 | read-write |
Severely errored seconds threshold. |
hwCesECSThresholdUAS | 1.3.6.1.4.1.2011.5.11.13.1.4 | gauge32 | read-write |
Unavailable seconds threshold. |
hwCesECSThresholdCESC | 1.3.6.1.4.1.2011.5.11.13.1.5 | gauge32 | read-write |
Consecutive severely errored seconds threshold. |
hwCesECSDateTable | 1.3.6.1.4.1.2011.5.11.14 | no-access |
E1 perform monitor statistic table. The indexes of this table are ifIndex, hwCesECSMonitorPeriodType and hwCesECSMonitorStage. |
|
1.3.6.1.4.1.2011.5.11.14.1 | no-access |
E1 perform monitor statistic table. The indexes of this entry are ifIndex, hwCesECSMonitorPeriodType and hwCesECSMonitorStage. |
||
hwCesECSMonitorStage | 1.3.6.1.4.1.2011.5.11.14.1.1 | integer | read-only |
Perform monitor period stage, 0:current, 1:history Options: 1. current(0) - The perform monitor period is current 2. history(1) - The perform monitor period is history Enumeration: 'current': 0, 'history': 1. |
hwCesECSMonitorStageStartTime | 1.3.6.1.4.1.2011.5.11.14.1.2 | dateandtime | read-only |
The start time of the monitor period. |
hwCesECSDataES | 1.3.6.1.4.1.2011.5.11.14.1.3 | gauge32 | read-only |
Statistic of the errored seconds. |
hwCesECSDataSES | 1.3.6.1.4.1.2011.5.11.14.1.4 | gauge32 | read-only |
Statistic of the severe errors. |
hwCesECSDataUAS | 1.3.6.1.4.1.2011.5.11.14.1.5 | gauge32 | read-only |
Statistic of the unavailable seconds. |
hwAtmCesSubboardWorkModeTable | 1.3.6.1.4.1.2011.5.11.15 | no-access |
CES board configration table. The indexes of this table are hwFrameIndex and hwSlotIndex. |
|
1.3.6.1.4.1.2011.5.11.15.1 | no-access |
CES board configration table. The indexes of this entry are hwFrameIndex and hwSlotIndex. |
||
hwAtmCesSubboardWorkMode | 1.3.6.1.4.1.2011.5.11.15.1.1 | integer | read-write |
CES subboard working mode. Options: 1. loadsharing(1) - The CES subboard works in loadsharing mode 2. activestandby(2) - The CES subboard works in activestandby mode Enumeration: 'activestandby': 2, 'loadsharing': 1. |
hwCesECSThresholdParameterTable | 1.3.6.1.4.1.2011.5.11.16 | |||
hwCesErroredSeconds | 1.3.6.1.4.1.2011.5.11.16.1 | integer32 | read-write |
Errored seconds degrade threshold. |
hwCesConsecutiveSeverelyErroredSeconds | 1.3.6.1.4.1.2011.5.11.16.2 | integer32 | read-write |
Consecutive severely errored seconds degrade threshold. |
hwCesDegradedMinutes | 1.3.6.1.4.1.2011.5.11.16.3 | integer32 | read-write |
Degraded Minutes degrade threshold. |
hwCesPortUnconditionalLineFailureErroredRate | 1.3.6.1.4.1.2011.5.11.16.4 | integer32 | read-write |
Line Unconditional Blooey Errored Rate threshold. |
hwCesPortOptionalLineFailureErroredRate | 1.3.6.1.4.1.2011.5.11.16.5 | integer32 | read-write |
Line Conditional Blooey Errored Rate threshold. |
hwCesPortLineDisturbanceTransientErroredRate | 1.3.6.1.4.1.2011.5.11.16.6 | integer32 | read-write |
Line Temporary Disturb Errored Rate threshold. |
hwCesPortG704ExcessiveFrameSlipfrequency | 1.3.6.1.4.1.2011.5.11.16.7 | integer32 | read-write |
Overfull Frame Slip threshold. |
hwCesDefinedErroredSeconds | 1.3.6.1.4.1.2011.5.11.16.8 | integer32 | read-write |
Errored Seconds Define threshold. |
hwCesDefinedSeverelyErroredSeconds | 1.3.6.1.4.1.2011.5.11.16.9 | integer32 | read-write |
Severely Errored Seconds Define threshold. |
hwCesDefinedDegradedMinutes | 1.3.6.1.4.1.2011.5.11.16.10 | integer32 | read-write |
Degraded Minutes Define threshold. |
hwAtmCesPortCESoPCLKTable | 1.3.6.1.4.1.2011.5.11.17 | no-access |
Adaptive clock source configuration table. The indexes of this table are hwFrameIndex, hwSlotIndex and hwAtmCesPortCESoPCLKIndex. |
|
1.3.6.1.4.1.2011.5.11.17.1 | no-access |
Adaptive clock source configuration table. The indexes of this entry are hwFrameIndex, hwSlotIndex and hwAtmCesPortCESoPCLKIndex. |
||
hwAtmCesPortCESoPCLKIndex | 1.3.6.1.4.1.2011.5.11.17.1.1 | integer32 | no-access |
The index of adaptive clock source. |
hwAtmCesPortCESoPCLKBindPW | 1.3.6.1.4.1.2011.5.11.17.1.2 | unsigned32 | read-write |
Set and get the Connection ID binding with the adaptive clock source. |
hwAtmCesPortCESoPCLKSetFlag | 1.3.6.1.4.1.2011.5.11.17.1.3 | integer | read-write |
Get and set the configuration of adaptive clock source. Options: 1. null(1) - The clock source is null 2. exist(2) - The clock source exist Enumeration: 'null': 1, 'exist': 2. |
hwAtmCesPortCESoPCLKState | 1.3.6.1.4.1.2011.5.11.17.1.4 | integer | read-only |
Get the running state of adaptive clock source. Options: 1. normal(1) - Normal state 2. fault(2) - Fault state Enumeration: 'fault': 2, 'normal': 1. |
hwAtmCesPortCESoPLineCLKPortId | 1.3.6.1.4.1.2011.5.11.17.1.5 | integer32 | read-write |
Set and get the Port ID binding with the Line clock source. |
hwAtmCesPortCESoPLineCLKState | 1.3.6.1.4.1.2011.5.11.17.1.6 | integer | read-only |
Get the running state of Line clock source. Options: 1. normal(1) - Normal state 2. fault(2) - Fault state Enumeration: 'fault': 2, 'normal': 1. |
hwCesTDMVCLCfgTable | 1.3.6.1.4.1.2011.5.11.18 | no-access |
TDM VCL configuration table. The indexes of this table are hwTDMVCLID and ifIndex. |
|
1.3.6.1.4.1.2011.5.11.18.1 | no-access |
TDM VCL configuration table. The indexes of this entry are hwTDMVCLID and ifIndex. |
||
hwTDMVCLID | 1.3.6.1.4.1.2011.5.11.18.1.1 | unsigned32 | no-access |
TDM VCL ID. |
hwTDMVCLType | 1.3.6.1.4.1.2011.5.11.18.1.2 | integer | read-write |
TDM VCL type. Options: 1. satop(1) - The TDM VCL Type is satop 2. cesop(2) - The TDM VCL Type is cesop Enumeration: 'cesop': 2, 'satop': 1. |
hwTDMVCLTimeslot | 1.3.6.1.4.1.2011.5.11.18.1.3 | unsigned32 | read-write |
TDM timeslot, it must be set if hwTDMVCLType is set to be cesop. |
hwTDMVCLRowStatus | 1.3.6.1.4.1.2011.5.11.18.1.4 | rowstatus | read-write |
Row operation node . Running status cannot be deleted. |
hwCesTrapsVbOids | 1.3.6.1.4.1.2011.5.11.19 | |||
hwAtmCesPortStatus | 1.3.6.1.4.1.2011.5.11.19.1 | integer | no-access |
Indicate the port state. Options: 1. normal(1) - The port is in normal state 2. test(2) - The port is in test state 3. idle(3) - The port is in idle state 4. notExisted(4) - The port doesn't exist 5. fail(5) - The port is in fail state 6. block(6) - The port is in block state 7. maintain(7) - The port is in maintain state 8. loopback(11) - The port is in loopback state Enumeration: 'notExisted': 4, 'loopback': 11, 'normal': 1, 'test': 2, 'idle': 3, 'maintain': 7, 'fail': 5, 'block': 6. |
hwCesTraps | 1.3.6.1.4.1.2011.5.11.20 | |||
hwCesCommonTraps | 1.3.6.1.4.1.2011.5.11.20.1 | |||
hwCesCommonTrapsPrefix | 1.3.6.1.4.1.2011.5.11.20.1.0 | |||
hwCesPortStatusTrap | 1.3.6.1.4.1.2011.5.11.20.1.0.1 |
This trap message is generated when Ces port status changed. |
||
hwCesBoardWorkModeChangeTrap | 1.3.6.1.4.1.2011.5.11.20.1.0.2 |
This trap message is generated when E1T1 board work mode changed. |
||
hwCesPortWorkModeChangeTrap | 1.3.6.1.4.1.2011.5.11.20.1.0.3 |
This trap message is generated when Ces port work mode changed. |
||
hwCesAlarmTraps | 1.3.6.1.4.1.2011.5.11.20.2 | |||
hwCesAlarmTrapsPrefix | 1.3.6.1.4.1.2011.5.11.20.2.0 | |||
hwCesPortSignalLossAlarmTrap | 1.3.6.1.4.1.2011.5.11.20.2.0.1 |
This trap message is generated when Loss of signal occurs at the E1/T1 port. |
||
hwCesFrameLossAlarmTrap | 1.3.6.1.4.1.2011.5.11.20.2.0.2 |
This trap message is generated when Loss of frame alignment occurs at the E1/T1 port. |
||
hwCesRemoteAlarmReceivedAlarmTrap | 1.3.6.1.4.1.2011.5.11.20.2.0.3 |
This trap message is generated when remote alarm occurs at the E1/T1 port. |
||
hwCesMultiframeLossAlarmTrap | 1.3.6.1.4.1.2011.5.11.20.2.0.4 |
This trap message is generated when Loss of multiframe alignment occurs at the E1/T1 port. |
||
hwCesSignalOccurAlarmTrap | 1.3.6.1.4.1.2011.5.11.20.2.0.5 |
This trap message is generated when signal occurs at the E1/T1 port. |
||
hwCesCRC4ErrorOccurAlarmTrap | 1.3.6.1.4.1.2011.5.11.20.2.0.6 |
This trap message is generated when CRC4 error occurs at the E1/T1 port. |
||
hwCesLOSRecoverAlarmTrap | 1.3.6.1.4.1.2011.5.11.20.2.0.7 |
This trap message is generated when Loss of signal(LOS) recover at the E1/T1 port. |
||
hwCesFrameRecoverAlarmTrap | 1.3.6.1.4.1.2011.5.11.20.2.0.8 |
This trap message is generated when Loss of frame recover at the E1/T1 port. |
||
hwCesRemoteAlarmRecoverAlarmTrap | 1.3.6.1.4.1.2011.5.11.20.2.0.9 |
This trap message is generated when Remote alarm recover at the E1/T1 port. |
||
hwCesMultiframeRecoverAlarmTrap | 1.3.6.1.4.1.2011.5.11.20.2.0.10 |
This trap message is generated when Loss of multiframe alignment recover at the E1/T1 port. |
||
hwCesSignalRecoverAlarmTrap | 1.3.6.1.4.1.2011.5.11.20.2.0.11 |
This trap message is generated when signal recover at the E1/T1 port. |
||
hwCesCRC4RecoverAlarmTrap | 1.3.6.1.4.1.2011.5.11.20.2.0.12 |
This trap message is generated when CRC4 recover at the E1/T1 port. |
||
hwCesACMClockRestoreAlarmTrap | 1.3.6.1.4.1.2011.5.11.20.2.0.13 |
This trap message is generated when ACM clock restore. |
||
hwCesACMClockFaultAlarmTrap | 1.3.6.1.4.1.2011.5.11.20.2.0.14 |
This trap message is generated when ACM clock fault. |