HUAWEI-BFD-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-BFD-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, P-BRIDGE-MIB, HUAWEI-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwBFDMIB 1.3.6.1.4.1.2011.5.25.38
Description.
       hwBfdScalarsObjects 1.3.6.1.4.1.2011.5.25.38.1
           hwBfdVersionNumber 1.3.6.1.4.1.2011.5.25.38.1.1 unsigned32 read-only
The current version number of the BFD protocol is 1.
           hwBfdAdminStatus 1.3.6.1.4.1.2011.5.25.38.1.2 enabledstatus read-write
Describe the administrative status of a BFD protocol. The value 'enabled' denotes that the BFD Process is active on all interface; The value 'disabled' denotes that the BFD process is disabled on all interfaces.
           hwBfdSessLimitNumber 1.3.6.1.4.1.2011.5.25.38.1.3 unsigned32 read-only
Define the maximum number of BFD sessions allowed in the logic router.
           hwBfdSessInterfaceLimitNumber 1.3.6.1.4.1.2011.5.25.38.1.4 unsigned32 read-only
Define the maximum number of BFD sessions allowed per board.
           hwBfdSessStaticNumber 1.3.6.1.4.1.2011.5.25.38.1.5 unsigned32 read-only
The total number of BFD static sessions.
           hwBfdSessDynamicNumber 1.3.6.1.4.1.2011.5.25.38.1.6 unsigned32 read-only
The total number of BFD dynamic sessions.
           hwBfdSessGlobalDefaultIpAddr 1.3.6.1.4.1.2011.5.25.38.1.7 ipaddress read-write
Define the default multicast IP address used in BFD multicast detection.
           hwBfdEchoPassiveStatus 1.3.6.1.4.1.2011.5.25.38.1.8 enabledstatus read-write
The passive Echo function of BFD.
           hwBfdEchoAclNum 1.3.6.1.4.1.2011.5.25.38.1.9 unsigned32 read-write
The Acl Number for passive Echo function of BFD.
           hwBfdSessDynamicPingInterval 1.3.6.1.4.1.2011.5.25.38.1.10 unsigned32 read-write
Define the sending interval of the MPLS echo packet. The unit is second.
           hwBfdSessDynamicSupportPassive 1.3.6.1.4.1.2011.5.25.38.1.11 enabledstatus read-write
The capability of automatically creating BFD sessions on the LSP egress 'enable'denotes that the egress can create BFD sessions; 'disabled'denotes that the egress can not create BFD sessions.
           hwBfdSessDelayUpTime 1.3.6.1.4.1.2011.5.25.38.1.12 unsigned32 read-write
Define delay interval before the session turns to up. The unit is second.
           hwBfdSessMultiDstPort 1.3.6.1.4.1.2011.5.25.38.1.13 integer32 read-write
The destination UDP port of multi-hop BFD session. When the administrative status of BFD protocol is disabled, this value will be 0.
           hwBfdTrapSendInterval 1.3.6.1.4.1.2011.5.25.38.1.14 integer32 read-write
Define the sending interval of TRAP message. The unit is seconds.
       hwBfdObjects 1.3.6.1.4.1.2011.5.25.38.2
           hwBfdIfConfTable 1.3.6.1.4.1.2011.5.25.38.2.1 no-access
The interface configuration table of BFD entries.
               hwBfdIfConfEntry 1.3.6.1.4.1.2011.5.25.38.2.1.1 no-access
The BFD Interface Entry describes BFD Interface.
                   hwBfdIfConfIndex 1.3.6.1.4.1.2011.5.25.38.2.1.1.1 integer no-access
It is the Configuration's Index of this interface.
                   hwBfdIfConfName 1.3.6.1.4.1.2011.5.25.38.2.1.1.2 octet string read-only
It is the name of this Interface.
                   hwBfdIfConfEnable 1.3.6.1.4.1.2011.5.25.38.2.1.1.3 integer32 read-only
The flag that whether the interface has enabled BFD.
                   hwBfdIfConfDeleting 1.3.6.1.4.1.2011.5.25.38.2.1.1.4 integer32 read-only
The flag that whether the interface is in deleting. 0:The interface is not deleted. 1:The interface is deleted
                   hwBfdIfConfAvailable 1.3.6.1.4.1.2011.5.25.38.2.1.1.5 integer32 read-only
The flag that whether the interface is available. 0:The interface is not available. 1:The interface is available.
                   hwBfdIfConfSessCnt 1.3.6.1.4.1.2011.5.25.38.2.1.1.6 integer32 read-only
The number of sessions that has been bound to this interface.
                   hwBfdIfConfRowStatus 1.3.6.1.4.1.2011.5.25.38.2.1.1.7 rowstatus read-only
used to manage the creation and deletion of conceptual rows.
           hwBfdSessionConfTable 1.3.6.1.4.1.2011.5.25.38.2.2 no-access
The BFD Session Configuration Table describes the BFD sessions.
               hwBfdSessionConfEntry 1.3.6.1.4.1.2011.5.25.38.2.2.1 no-access
The BFD Session Configuration Entry describes BFD session.
                   hwBfdSessConfName 1.3.6.1.4.1.2011.5.25.38.2.2.1.1 octet string no-access
It is the name of this Configuration model.
                   hwBfdSessConfMIndex 1.3.6.1.4.1.2011.5.25.38.2.2.1.2 unsigned32 read-only
It is the Configuration's Index of this session.
                   hwBfdSessConfLocalDiscr 1.3.6.1.4.1.2011.5.25.38.2.2.1.3 unsigned32 read-only
Define the local discriminator of the BFD session.
                   hwBfdSessConfRemoteDiscr 1.3.6.1.4.1.2011.5.25.38.2.2.1.4 unsigned32 read-only
Define the remote discriminator of the BFD session.
                   hwBfdSessConfPeerAddr 1.3.6.1.4.1.2011.5.25.38.2.2.1.5 ipaddress read-only
Define the IP address of the peer in the BFD session.
                   hwBfdSessConfBindIfIndex 1.3.6.1.4.1.2011.5.25.38.2.2.1.6 unsigned32 read-only
It is the index of the binding interface in the BFD configuration.
                   hwBfdSessConfBindIfName 1.3.6.1.4.1.2011.5.25.38.2.2.1.7 octet string read-only
It is the name of the binding interface in the BFD configuration.
                   hwBfdSessConfDemandEnable 1.3.6.1.4.1.2011.5.25.38.2.2.1.8 integer read-only
It is the flag of the BFD demand mode. 0:Disable the BFD demand mode. 1:Enable the BFD demand mode.
                   hwBfdSessConfDemandTimerInterval 1.3.6.1.4.1.2011.5.25.38.2.2.1.9 unsigned32 read-only
Define the detecting interval in the BFD session with the demand mode. The unit is millisecond.
                   hwBfdSessConfDetectMult 1.3.6.1.4.1.2011.5.25.38.2.2.1.10 unsigned32 read-only
It is Detect time multiplier of the configuration. The negotiated transmit interval, multiplied by this value, provides the detection time for the transmitting system in Asynchronous mode.
                   hwBfdSessConfDesiredMinRxInterval 1.3.6.1.4.1.2011.5.25.38.2.2.1.11 bfdinterval read-only
This is the minimum interval of the configuration,in milliseconds, between received BFD Control packets that this system is capable of supporting.
                   hwBfdSessConfDesiredMinTxInterval 1.3.6.1.4.1.2011.5.25.38.2.2.1.12 bfdinterval read-only
This is the minimum interval of the configuration, in milliseconds, that the local system would like to use when transmitting BFD Control packets.
                   hwBfdSessConfWTRInterval 1.3.6.1.4.1.2011.5.25.38.2.2.1.13 integer read-only
This is the WTR interval of bfd session. The unit is minute.
                   hwBfdSessConfTOS 1.3.6.1.4.1.2011.5.25.38.2.2.1.14 integer read-only
This is the TOS value of bfd packet.
                   hwBfdSessConfPSTFlag 1.3.6.1.4.1.2011.5.25.38.2.2.1.15 integer read-only
The PST flag of the BFD session configuration.
                   hwBfdSessConfCommitFlag 1.3.6.1.4.1.2011.5.25.38.2.2.1.16 integer read-only
It is the commit flag of the configuration entry. 0: not commit 1: commit
                   hwBfdSessConfAdminStatus 1.3.6.1.4.1.2011.5.25.38.2.2.1.17 integer read-only
There may be circumstances where it is desirable to administratively enable or disable a BFD session of the configuration. The AdminStatus exists so that a session can be administratively put down indefinitely.
                   hwBfdSessConfRowStatus 1.3.6.1.4.1.2011.5.25.38.2.2.1.18 rowstatus read-only
used to manage the creation and deletion of conceptual rows.
                   hwBfdSessConfSourceAddr 1.3.6.1.4.1.2011.5.25.38.2.2.1.19 ipaddress read-only
Define the source IP address of the BFD session.
                   hwBfdSessConfVrfIndex 1.3.6.1.4.1.2011.5.25.38.2.2.1.20 unsigned32 read-only
The index of the VPN interface.
                   hwBfdSessConfVPNName 1.3.6.1.4.1.2011.5.25.38.2.2.1.21 octet string read-only
The name of VPN interface.
                   hwBfdSessConfDefaultIp 1.3.6.1.4.1.2011.5.25.38.2.2.1.22 integer read-only
BFD session use default multicast IP as the detect peer-ip 1 : do not use the default multicast IP 2 : use the default multicast IP default value is 1 (do not use) Enumeration: 'yes': 2, 'no': 1.
                   hwBfdSessConfPISFlag 1.3.6.1.4.1.2011.5.25.38.2.2.1.23 integer read-only
The state of BFD session is associated with the state of the binding interface 1 : do not associate with interface state 2 : associate with interface state 3 : associate with interface and correlative sub interface . default value is 1 (do not associate) Enumeration: 'true': 2, 'subif': 3, 'false': 1.
                   hwBfdSessConfBindType 1.3.6.1.4.1.2011.5.25.38.2.2.1.24 integer read-only
The binding type of the BFD session: 1: BFD for IP with peer-ip and interface; 2: BFD for IP only with peer-ip; 3: BFD for IP with peer-ip and source-ip; 4: BFD for IP with peer-ip, interface and source-ip; 5: BFD for FEC(NOT support now); 6: BFD for Tunnel interface(NOT support now); 7: BFD for OSPF; 8: BFD for ISIS; 9: BFD for LDP-LSP; 10: BFD for static LSP; 11: BFD for TE-LSP; 12: BFD for TE-Tunnel; 13: BFD for PW; 15: BFD for VSI PW; Enumeration: 'peerIp': 2, 'ldpLsp': 9, 'isis': 8, 'fec': 5, 'tunnelIf': 6, 'vsiPw': 15, 'ospf': 7, 'teLsp': 11, 'staticLsp': 10, 'interfaceIp': 1, 'ifAndSourceIp': 4, 'teTunnel': 12, 'sourceIp': 3, 'pw': 13.
                   hwBfdSessConfNextHop 1.3.6.1.4.1.2011.5.25.38.2.2.1.25 ipaddress read-only
It is the next hop of the BFD session.
                   hwBfdSessConfStaticLspName 1.3.6.1.4.1.2011.5.25.38.2.2.1.26 octet string read-only
It is the static LSP name of the BFD session.
                   hwBfdSessConfPWSecondaryFlag 1.3.6.1.4.1.2011.5.25.38.2.2.1.27 integer read-only
The role of the PW bound with BFD session: 1: master PW; 2: secondary PW; 3: no PW Enumeration: 'flagNoPW': 3, 'flagMasterPW': 1, 'flagSecondaryPW': 2.
                   hwBfdSessConfTunnelDetectType 1.3.6.1.4.1.2011.5.25.38.2.2.1.28 integer read-only
Set the failure notifies policy type: 1: Notify applications when detecting both Detect-Down and Neighbor-Down; 2: Notify applications only when detecting Neighbor-Down; Enumeration: 'flagNeighborDown': 2, 'flagBothDown': 1.
                   hwBfdSessConfVcId 1.3.6.1.4.1.2011.5.25.38.2.2.1.29 unsigned32 read-only
It is the ID of VC.
                   hwBfdSessConfVsiName 1.3.6.1.4.1.2011.5.25.38.2.2.1.30 octet string read-only
It is the name of VSI.
                   hwBfdSessConfVsiPeerAddr 1.3.6.1.4.1.2011.5.25.38.2.2.1.31 ipaddress read-only
It is the peer-ip of VSI.
                   hwBfdSessConfDiscrAuto 1.3.6.1.4.1.2011.5.25.38.2.2.1.32 enabledstatus read-only
Describe whether the discriminator can be auto allocated: disabled: The discriminator can not be allocated automatically; enabled: The discriminator can be allocated automatically.
           hwBfdSessionTable 1.3.6.1.4.1.2011.5.25.38.2.3 no-access
The BFD Session Table describes the BFD sessions.
               hwBfdSessionEntry 1.3.6.1.4.1.2011.5.25.38.2.3.1 no-access
The BFD Session Entry describes BFD session.
                   hwBfdSessIndex 1.3.6.1.4.1.2011.5.25.38.2.3.1.1 unsigned32 no-access
It is unique and the Index of this session.
                   hwBfdSessMIndex 1.3.6.1.4.1.2011.5.25.38.2.3.1.2 unsigned32 read-only
This value indicate the configuration has Main Index.
                   hwBfdSessBindVRRP 1.3.6.1.4.1.2011.5.25.38.2.3.1.3 integer read-only
Describe the capability of bound with VRRP for the BFD session. 0: not bind 1: bind
                   hwBfdSessCfgName 1.3.6.1.4.1.2011.5.25.38.2.3.1.4 octet string read-only
This indicate the name of the session which will be display course information or statistic information of the session.
                   hwBfdSessPeerAddr 1.3.6.1.4.1.2011.5.25.38.2.3.1.5 ipaddress read-only
Define the peer IP address of the BFD session.
                   hwBfdSessBindIfIndex 1.3.6.1.4.1.2011.5.25.38.2.3.1.6 integer read-only
It is the index of the binding interface in the BFD session
                   hwBfdSessBindIfName 1.3.6.1.4.1.2011.5.25.38.2.3.1.7 octet string read-only
It is the name of the binding interface in the BFD session.
                   hwBfdSessLocalDiscr 1.3.6.1.4.1.2011.5.25.38.2.3.1.8 unsigned32 read-only
A unique, nonzero discriminator value generated by the transmitting system, used to demultiplex multiple BFD sessions between the same pair of system.
                   hwBfdSessRemoteDiscr 1.3.6.1.4.1.2011.5.25.38.2.3.1.9 unsigned32 read-only
The discriminator received from the corresponding remote system. This field reflects back the received value of My Discriminator, or is zero if that value is unknown.
                   hwBfdSessOperMode 1.3.6.1.4.1.2011.5.25.38.2.3.1.10 integer32 read-only
Describe the current operating mode configured with the BFD session. 0: Asynchronous mode with echo function; 1: Asynchronous mode without echo function; 2: Demand mode with echo function; 3: Demand mode without echo function;
                   hwBfdSessDetectMult 1.3.6.1.4.1.2011.5.25.38.2.3.1.11 unsigned32 read-only
Detect time multiplier. The negotiated transmit interval, multiplied by this value, provides the detection time for the transmitting system in Asynchronous mode.
                   hwBfdSessDemandTimerInterval 1.3.6.1.4.1.2011.5.25.38.2.3.1.12 bfdinterval read-only
It is the detecting interval in the BFD session with the demand mode. The unit is millisecond.
                   hwBfdSessActualRxInterval 1.3.6.1.4.1.2011.5.25.38.2.3.1.13 bfdinterval read-only
This is the minimum interval, in milliseconds, between received BFD Control packets that this system is capable of supporting.
                   hwBfdSessActualTxInterval 1.3.6.1.4.1.2011.5.25.38.2.3.1.14 bfdinterval read-only
This is the minimum interval, in milliseconds, that the local system would like to use when transmitting BFD Control packets.
                   hwBfdSessWTRInterval 1.3.6.1.4.1.2011.5.25.38.2.3.1.15 integer read-only
The WTR interval of the BFD session. The unit is minute.
                   hwBfdSessTOS 1.3.6.1.4.1.2011.5.25.38.2.3.1.16 integer read-only
This is the TOS value of bfd packet.
                   hwBfdSessState 1.3.6.1.4.1.2011.5.25.38.2.3.1.17 integer32 read-only
Describe the current state of the BFD session. 0: Admin Down; 1: Down; 2: Init; 3: Up;
                   hwBfdSessDiag 1.3.6.1.4.1.2011.5.25.38.2.3.1.18 integer32 read-only
A diagnostic code specifying the local system's reason for the last session state change. Values are: 0--No Diagnostic 1--Control Detection Time Expired 2--Echo Function Failed 3--Neighbor Signaled Session Down 4--Forwarding Plane Reset 5--Path Down 6--Concatenated Path Down 7--Administratively Down 8--Reverse Concatenated Path Down 9--Neighbor Signaled Session Down (Receive AdminDown) 10-31--Reserved for future use
                   hwBfdSessSourceAddr 1.3.6.1.4.1.2011.5.25.38.2.3.1.19 ipaddress read-only
The source address of the session.
                   hwBfdSessVrfIndex 1.3.6.1.4.1.2011.5.25.38.2.3.1.20 unsigned32 read-only
The index of the VPN interface.
                   hwBfdSessVPNName 1.3.6.1.4.1.2011.5.25.38.2.3.1.21 octet string read-only
The name of VPN interface.
                   hwBfdSessType 1.3.6.1.4.1.2011.5.25.38.2.3.1.22 integer read-only
The type of the BFD session. 1:static 2:dynamic 3:entire dynamic Enumeration: 'dynamic': 2, 'static': 1, 'entireDynamic': 3.
                   hwBfdSessBindAppType 1.3.6.1.4.1.2011.5.25.38.2.3.1.23 integer read-only
The Application type that this BFD session has been bound to 1:No application 2:VRRP 3:IFNET 4:VRRP&IFNET 5:BGP 6:OSPF 7:BGP&OSPF 8:OAM&LSPM&L2VPN (for LDP LSP and static LSP) 9:OAM&LSPM&TUNNEL&L2VPN (for TE_Tunnnel) 10:LSPM&TUNNEL&TUNNEL_PS&L2VPN (for TE_LSP) 11:OAM&MPLSFW&L2VPN (for PW) 12:ISIS 13:VSIPW (for VSI PW) 14:VRRP&OAM&LSPM&L2VPN 15:VRRP&OAM&TUNNEL&L2VPN 16:VRRP&LSPM&TUNNEL&TUNNEL_PS&L2VPN 17:VRRP&OAM&MPLSFW&L2VPN 18:PIM 19:BGP&ISIS 20:BGP&PIM 21:OSPF&ISIS 22:OSPF&PIM 23:ISIS&PIM 24:BGP&OSPF&ISIS 25:BGP&OSPF&PIM 26:BGP&ISIS&PIM 27:OSPF&ISIS&PIM 28:BGPOSPF&ISIS&PIM Enumeration: 'isisPim': 23, 'pim': 18, 'noApplication': 1, 'bgpIsisPim': 26, 'bgpIsis': 19, 'bgpOspfIsisPim': 28, 'vrrpOamMplsfwL2vpn': 17, 'ifnet': 3, 'ospfIsis': 21, 'lspmTnlL2vpnTnlps': 10, 'bgpOspfIsis': 24, 'vsiPw': 13, 'vrrp': 2, 'oamLspmL2vpn': 8, 'oamLspmTnlL2vpn': 9, 'bgpPim': 20, 'bgpIspfPim': 25, 'ospf': 6, 'bgpAndOspf': 7, 'vrrpAndIfnet': 4, 'vrrpOamLspmL2vpn': 14, 'oamMplsfwL2vpn': 11, 'isis': 12, 'ospfIsisPim': 27, 'vrrpOamTnlL2vpn': 15, 'ospfPim': 22, 'bgp': 5, 'vrrpLspmTnlL2vpnTnlps': 16.
                   hwBfdSessDefaultIp 1.3.6.1.4.1.2011.5.25.38.2.3.1.24 integer read-only
BFD session use default multicast IP as the detect peer-ip 1 : do not use the default multicast IP 2 : use the default multicast IP Enumeration: 'yes': 2, 'no': 1.
                   hwBfdSessPISFlag 1.3.6.1.4.1.2011.5.25.38.2.3.1.25 integer read-only
The state of BFD session is associated with the state of the binding interface 1 : do not associate with interface state 2 : associate with interface state 3 : associate with interface and correlative sub interface. Enumeration: 'true': 2, 'subif': 3, 'false': 1.
                   hwBfdSessBindType 1.3.6.1.4.1.2011.5.25.38.2.3.1.26 integer read-only
The binding type of the BFD session: 1: BFD for IP with peer-ip and interface; 2: BFD for IP only with peer-ip; 3: BFD for IP with peer-ip and source-ip; 4: BFD for IP with peer-ip, interface and source-ip; 5: BFD for FEC(NOT support now); 6: BFD for Tunnel interface(NOT support now); 7: BFD for OSPF; 8: BFD for ISIS; 9: BFD for LDP-LSP; 10: BFD for static LSP; 11: BFD for TE-LSP; 12: BFD for TE-Tunnel; 13: BFD for PW; 15: BFD for VSI PW; Enumeration: 'peerIp': 2, 'ldpLsp': 9, 'isis': 8, 'fec': 5, 'tunnelIf': 6, 'vsiPw': 15, 'ospf': 7, 'teLsp': 11, 'staticLsp': 10, 'interfaceIp': 1, 'ifAndSourceIp': 4, 'teTunnel': 12, 'sourceIp': 3, 'pw': 13.
                   hwBfdSessNextHop 1.3.6.1.4.1.2011.5.25.38.2.3.1.27 ipaddress read-only
It is the next hop of the BFD session.
                   hwBfdSessStaticLspName 1.3.6.1.4.1.2011.5.25.38.2.3.1.28 octet string read-only
It is the static LSP name of the BFD session.
                   hwBfdSessLspIndex 1.3.6.1.4.1.2011.5.25.38.2.3.1.29 unsigned32 read-only
It is the index of the static LSP or LDP LSP in BFD session, mapping the channel index in MPLS network.
                   hwBfdSessPWSecondaryFlag 1.3.6.1.4.1.2011.5.25.38.2.3.1.30 integer read-only
The role of the PW bound with BFD session: 1: master PW; 2: secondary PW; 3: no PW; Enumeration: 'flagNoPW': 3, 'flagMasterPW': 1, 'flagSecondaryPW': 2.
                   hwBfdSessTunnelDetectType 1.3.6.1.4.1.2011.5.25.38.2.3.1.31 integer read-only
Set the failure notifies policy type: 1: Notify applications when detecting both Detect-Down and Neighbor-Down; 2: Notify applications only when detecting Neighbor-Down; Enumeration: 'flagNeighborDown': 2, 'flagBothDown': 1.
                   hwBfdSessVcId 1.3.6.1.4.1.2011.5.25.38.2.3.1.32 unsigned32 read-only
It is the ID of VC.
                   hwBfdSessVsiName 1.3.6.1.4.1.2011.5.25.38.2.3.1.33 octet string read-only
It is the name of VSI.
                   hwBfdSessVsiPeerAddr 1.3.6.1.4.1.2011.5.25.38.2.3.1.34 ipaddress read-only
It is the peer-ip of VSI.
                   hwBfdSessDiscrAuto 1.3.6.1.4.1.2011.5.25.38.2.3.1.35 enabledstatus read-only
Describe whether the discriminator can be auto allocated: disabled: The discriminator can not be allocated automatically; enabled: The discriminator can be allocated automatically.
           hwBfdSessionPerTable 1.3.6.1.4.1.2011.5.25.38.2.4 no-access
This table specifies BFD Session performance counters.
               hwBfdSessionPerEntry 1.3.6.1.4.1.2011.5.25.38.2.4.1 no-access
An entry in this table is created by a BFD-enabled node for every BFD Session.
                   hwBfdSessPerIndex 1.3.6.1.4.1.2011.5.25.38.2.4.1.1 unsigned32 no-access
The index of BFD session statistics.
                   hwBfdSessPerfPktIn 1.3.6.1.4.1.2011.5.25.38.2.4.1.2 counter32 read-only
The statistical information of the received Octets in local system in this session.The total received packet number.
                   hwBfdSessPerfPktInHC 1.3.6.1.4.1.2011.5.25.38.2.4.1.3 counter32 read-only
The statistical information of the received Octets in local system in this session.The high 4 bytes of total received packet number.
                   hwBfdSessPerfPktOut 1.3.6.1.4.1.2011.5.25.38.2.4.1.4 counter32 read-only
The statistical information of the send Packets in local system in this session.
                   hwBfdSessPerfPktOutHC 1.3.6.1.4.1.2011.5.25.38.2.4.1.5 counter32 read-only
The statistical information of the send Packets in local system in this session.The high 4 bytes of total send packet number
                   hwBfdSessPerfBadIn 1.3.6.1.4.1.2011.5.25.38.2.4.1.6 counter32 read-only
The statistical information of the received Errors in local system in this session.
                   hwBfdSessPerfBadInHC 1.3.6.1.4.1.2011.5.25.38.2.4.1.7 counter32 read-only
The statistical information of the received Errors in local system in this session.The high 4 bytes of total received wrong packet number.
                   hwBfdSessPerfBadOut 1.3.6.1.4.1.2011.5.25.38.2.4.1.8 counter32 read-only
The statistical information of the send Errors in local system in this session.
                   hwBfdSessPerfBadOutHC 1.3.6.1.4.1.2011.5.25.38.2.4.1.9 counter32 read-only
The statistical information of the send Errors in local system in this session.The high 4 bytes of total send wrong packet number
                   hwBfdSessPerfLastSessDownTime 1.3.6.1.4.1.2011.5.25.38.2.4.1.10 octet string read-only
The statistical information of the trammitted Octets in local system in this session.
                   hwBfdSessPerfSessDownCount 1.3.6.1.4.1.2011.5.25.38.2.4.1.11 unsigned32 read-only
The total count of session down.
                   hwBfdSessPerfSessShortBreakCount 1.3.6.1.4.1.2011.5.25.38.2.4.1.12 unsigned32 read-only
The total count of session shortbreak.
                   hwBfdSessionPerStartTime 1.3.6.1.4.1.2011.5.25.38.2.4.1.13 octet string read-only
The time that session start detection.
           hwBfdSlotTable 1.3.6.1.4.1.2011.5.25.38.2.5 no-access
The Slot table of BFD entries.
               hwBfdSlotEntry 1.3.6.1.4.1.2011.5.25.38.2.5.1 no-access
BFD statistics on specify board of containing the following objects.
                   hwBfdSlotID 1.3.6.1.4.1.2011.5.25.38.2.5.1.1 unsigned32 no-access
The ID of Slot.
                   hwBfdSlotReserveOneHopSessNum 1.3.6.1.4.1.2011.5.25.38.2.5.1.2 unsigned32 read-only
The number of session reserving for one-hop session on the board.
                   hwBfdSlotOneHopSessNum 1.3.6.1.4.1.2011.5.25.38.2.5.1.3 unsigned32 read-only
The number of session for one-hop session on the board.
                   hwBfdSlotCurrentSessNum 1.3.6.1.4.1.2011.5.25.38.2.5.1.4 unsigned32 read-only
The number of session on the board on current.
                   hwBfdSlotRowStatus 1.3.6.1.4.1.2011.5.25.38.2.5.1.5 rowstatus read-only
Used to manage the creation and deletion of conceptual rows.
           hwBfdTtlConfTable 1.3.6.1.4.1.2011.5.25.38.2.6 no-access
The TTL configuration table.
               hwBfdTtlConfEntry 1.3.6.1.4.1.2011.5.25.38.2.6.1 no-access
The TTL configuration entry.
                   hwBfdTtlConfAddr 1.3.6.1.4.1.2011.5.25.38.2.6.1.1 ipaddress no-access
IP address.
                   hwBfdTtlConfMaskLen 1.3.6.1.4.1.2011.5.25.38.2.6.1.2 integer32 no-access
Length of IP address mask.
                   hwBfdTtlConfType 1.3.6.1.4.1.2011.5.25.38.2.6.1.3 integer no-access
Type of BFD session. Enumeration: 'singleHop': 1, 'multiHop': 2.
                   hwBfdTtlConfValue 1.3.6.1.4.1.2011.5.25.38.2.6.1.4 integer32 read-only
TTL value.
                   hwBfdTtlConfRowStatus 1.3.6.1.4.1.2011.5.25.38.2.6.1.50 rowstatus read-only
The status of this table entry.
       hwBfdNotifications 1.3.6.1.4.1.2011.5.25.38.3
           hwBfdSessDown 1.3.6.1.4.1.2011.5.25.38.3.1
This trap occurred when the state of the BFD session became down. The BFD session is characterized by the objects in this node.
           hwBfdSessUp 1.3.6.1.4.1.2011.5.25.38.3.2
This trap occurred when the state of the BFD session became up. The BFD session is characterized by the objects in this node.
           hwBfdSessReachLimit 1.3.6.1.4.1.2011.5.25.38.3.3
There is the notify when the session number reach the global limit.
           hwBfdSessReachLimitBindIf 1.3.6.1.4.1.2011.5.25.38.3.4
There is the notify when the session number reach the interface limit.
       hwBfdConformance 1.3.6.1.4.1.2011.5.25.38.4
           hwBfdCompliances 1.3.6.1.4.1.2011.5.25.38.4.1
               hwBfdFullCompliance 1.3.6.1.4.1.2011.5.25.38.4.1.1
Description.
           hwBfdGroups 1.3.6.1.4.1.2011.5.25.38.4.2
               hwBfdGroup 1.3.6.1.4.1.2011.5.25.38.4.2.1
Description.
               hwBfdSessGroup 1.3.6.1.4.1.2011.5.25.38.4.2.2
Description.
               hwBfdObsoleteGroup 1.3.6.1.4.1.2011.5.25.38.4.2.3
Description.
               hwBfdNotificationGroup 1.3.6.1.4.1.2011.5.25.38.4.2.4
Description.