HUAWEI-ATM-OAM-MIB: View SNMP OID List / Download MIB
VENDOR: HUAWEI
| Home | MIB: HUAWEI-ATM-OAM-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| hwAtmOam | 1.3.6.1.4.1.2011.6.11 |
huawei hwAtmOam mib. |
||
| hwAtmOamMibObjects | 1.3.6.1.4.1.2011.6.11.1 | |||
| hwAtmOamPointTable | 1.3.6.1.4.1.2011.6.11.1.1 | no-access |
Table of OAM point. functions Decripted as: |
|
| 1.3.6.1.4.1.2011.6.11.1.1.1 | no-access |
OAM point table entry. |
||
| hwAtmOamPointVPI | 1.3.6.1.4.1.2011.6.11.1.1.1.1 | atmvpidentifier | no-access |
vpi. |
| hwAtmOamPointVCI | 1.3.6.1.4.1.2011.6.11.1.1.1.2 | atmvcidentifier | no-access |
vci. if vci = 0, means that this is a F4 point |
| hwAtmOamPointType | 1.3.6.1.4.1.2011.6.11.1.1.1.3 | integer | read-only |
OAM point type. e2e(1) : e-t-e end point. segment(2) : segment end point. e2e-inter(3) : connection point within two e-t-e points. segment-inter(4): connection point within two segment points. Enumeration: 'e2e': 1, 'segmentInter': 4, 'segment': 2, 'e2eInter': 3. |
| hwAtmOamPointAdminStatus | 1.3.6.1.4.1.2011.6.11.1.1.1.4 | integer | read-only |
up(1) means enable; down(2) means disable. Enumeration: 'down': 2, 'up': 1. |
| hwAtmOamAlarmType | 1.3.6.1.4.1.2011.6.11.1.1.1.5 | integer | read-only |
OAM point alarm type. noAlarm(0) : no alarm. receiveAisCell(0x01): received AIS cell. receiveRdiCell(0x02): received RDI cell. loc(0x04) : lost of continuty(CC failed). f4Ais(0x08) : F4 layer AIS alarm. only for F5 point. portAlarm(0x10) : F1~F3 layer alarm. All Alarms can happen at same time which dispayed as the relate bit Enumeration: 'loc': 4, 'f4Ais': 8, 'portAlarm': 16, 'noAlarm': 0, 'receiveAisCell': 1, 'receiveRdiCell': 2. |
| hwAtmOamCfgFlag | 1.3.6.1.4.1.2011.6.11.1.1.1.6 | integer | read-only |
OAM point configure recovering flag. running(1) : OAM point in running stage. recovering(2): OAM point in recovering stage. Enumeration: 'running': 1, 'recovering': 2. |
| hwAtmOamFmStatus | 1.3.6.1.4.1.2011.6.11.1.1.1.7 | integer | read-only |
OAM point FM status. Enumeration: 'rdi': 3, 'ais': 2, 'normal': 1. |
| hwAtmOamFmStatusDateTime | 1.3.6.1.4.1.2011.6.11.1.1.1.8 | dateandtime | read-only |
The time that the OAM point entered this FM status. |
| hwAtmOamPointRowStatus | 1.3.6.1.4.1.2011.6.11.1.1.1.9 | rowstatus | read-only |
OAM point table row status. |
| hwAtmOamCcTable | 1.3.6.1.4.1.2011.6.11.1.2 | no-access |
Table of CC end point. see the define of the OAM point table . |
|
| 1.3.6.1.4.1.2011.6.11.1.2.1 | no-access |
OAM CC end point table entry. |
||
| hwAtmOamCcVPI | 1.3.6.1.4.1.2011.6.11.1.2.1.1 | atmvpidentifier | no-access |
vpi. |
| hwAtmOamCcVCI | 1.3.6.1.4.1.2011.6.11.1.2.1.2 | atmvcidentifier | no-access |
vci. if vci = 0, means that this is a F4 point |
| hwAtmOamCcDirection | 1.3.6.1.4.1.2011.6.11.1.2.1.3 | integer | read-only |
OAM CC direction. Enumeration: 'source': 2, 'sink': 1, 'both': 3. |
| hwAtmOamConfType | 1.3.6.1.4.1.2011.6.11.1.2.1.4 | integer | read-only |
OAM CC configure type,only valid up or down operating . autoConfig(1) : active/deactive CC by A/D protocol. manualConfig(2): active/deactive CC by TMN entirely. see I.610 Enumeration: 'manualConfig': 2, 'autoConfig': 1. |
| hwAtmOamCcAdminStatus | 1.3.6.1.4.1.2011.6.11.1.2.1.5 | integer | read-only |
up(1) means enable; down(2) means disable. Enumeration: 'down': 2, 'up': 1. |
| hwAtmOamCcRowStatus | 1.3.6.1.4.1.2011.6.11.1.2.1.6 | rowstatus | read-only |
OAM CC end point table row status. |
| hwAtmOamLbTable | 1.3.6.1.4.1.2011.6.11.1.3 | no-access |
Table of loopback. |
|
| 1.3.6.1.4.1.2011.6.11.1.3.1 | no-access |
OAM loopback table entry. This talbe only support 'set' operation. |
||
| hwAtmOamLbVPI | 1.3.6.1.4.1.2011.6.11.1.3.1.1 | atmvpidentifier | no-access |
vpi. |
| hwAtmOamLbVCI | 1.3.6.1.4.1.2011.6.11.1.3.1.2 | atmvcidentifier | no-access |
vci. if vci = 0, means that this is a F4 point. |
| hwAtmOamLbType | 1.3.6.1.4.1.2011.6.11.1.3.1.3 | integer | read-only |
OAM loopback type. e2e(1) : end to end loopback. segment(2) : segment loopback. llid(3) : specified llid loopback. no-loopback(4): stopping loopback. Enumeration: 'e2e': 1, 'llid': 3, 'segment': 2, 'no-loopback': 4. |
| hwAtmOamLbPointLLID | 1.3.6.1.4.1.2011.6.11.1.3.1.4 | octet string | read-only |
Specify loopback destination LLID, which valid only hwAtmOamLbType being set llid(3) . |
| hwAtmOamLbNumber | 1.3.6.1.4.1.2011.6.11.1.3.1.5 | integer | read-only |
Specify the number of the cells loopbacked . |
| hwAtmOamLbInterval | 1.3.6.1.4.1.2011.6.11.1.3.1.6 | integer | read-only |
Specify the interval between two insert operation. |
| hwAtmOamLlidTable | 1.3.6.1.4.1.2011.6.11.1.4 | no-access |
Table of LLID. |
|
| 1.3.6.1.4.1.2011.6.11.1.4.1 | no-access |
OAM LLID table entry. |
||
| hwAtmOamLlidPointLLID | 1.3.6.1.4.1.2011.6.11.1.4.1.1 | octet string | read-write |
local interface LLID. |
| hwAtmOamInsertTable | 1.3.6.1.4.1.2011.6.11.1.5 | no-access |
Table of Insert. |
|
| 1.3.6.1.4.1.2011.6.11.1.5.1 | no-access |
OAM Insert table entry. This talbe only support 'set' operation. |
||
| hwAtmOamInsertVPI | 1.3.6.1.4.1.2011.6.11.1.5.1.1 | atmvpidentifier | no-access |
vpi. |
| hwAtmOamInsertVCI | 1.3.6.1.4.1.2011.6.11.1.5.1.2 | atmvcidentifier | no-access |
vci. if vci = 0, means that this is a F4 point. |
| hwAtmOamInsertOperation | 1.3.6.1.4.1.2011.6.11.1.5.1.3 | integer | read-only |
specify the operation(begin or stop) of the insertion . Enumeration: 'start': 1, 'stop': 2. |
| hwAtmOamInsertSegment | 1.3.6.1.4.1.2011.6.11.1.5.1.4 | integer | read-only |
specify the segment type. Enumeration: 'segment': 1, 'end': 2. |
| hwAtmOamInsertCellType | 1.3.6.1.4.1.2011.6.11.1.5.1.5 | integer | read-only |
specify the type of the inserted cell . Enumeration: 'cc': 3, 'rdi': 2, 'ais': 1. |
| hwAtmOamTraps | 1.3.6.1.4.1.2011.6.11.2 | |||
| hwAtmOamTrapVarBindOids | 1.3.6.1.4.1.2011.6.11.2.1 | |||
| hwAtmOamGeneralVarBindOids | 1.3.6.1.4.1.2011.6.11.2.1.1 | |||
| hwAtmOamVarBindLoopbackResult | 1.3.6.1.4.1.2011.6.11.2.1.1.1 | integer | no-access |
Loopback result: success(1) --loopback success timeout(2) --not recieved loopback cell for 5 seconds after sent, time out Enumeration: 'success': 1, 'timeout': 2. |
| hwAtmOamVarBindOidsReason | 1.3.6.1.4.1.2011.6.11.2.1.2 | |||
| hwAtmOamAisReason | 1.3.6.1.4.1.2011.6.11.2.1.2.1 | integer | no-access |
OAM operation terminate reason: enumFirst: explain ATM connection be deleted resolving method:None enumSecond: explain Board fail resolving method:None OAMֹԭ enumFirst: 澯ԭ ATMӱɾ : enumSecond: 澯ԭ : Enumeration: 'connDelete': 1, 'boardFail': 2. |
| hwAtmOamOperTerminateReason | 1.3.6.1.4.1.2011.6.11.2.1.2.2 | integer | no-access |
OAM operation terminate reason: enumFirst: explain ATM connection be deleted resolving method:None enumSecond: explain Board fail resolving method:None OAMֹԭ enumFirst: 澯ԭ ATMӱɾ : enumSecond: 澯ԭ : Enumeration: 'connDelete': 1, 'boardFail': 2. |
| hwAtmOamAlarmTraps | 1.3.6.1.4.1.2011.6.11.2.2 | |||
| hwAtmOamAlarmTrapsOids | 1.3.6.1.4.1.2011.6.11.2.2.0 | |||
| hwAtmOamAlarmAis | 1.3.6.1.4.1.2011.6.11.2.2.0.1 |
alarm description:AIS alarm explain AIS cell recieved from upstream. resolving method:Check if there is some defect in the upstream 澯AIS澯 澯ԭյεAISԪ 飺Ƿ |
||
| hwAtmOamAlarmAisRestore | 1.3.6.1.4.1.2011.6.11.2.2.0.2 |
alarm description:AIS alarmrestore explain There is no AIS cell recieved from upstream within a time interval of 2.5 seconds, with a margin of 0.5 seconds, resolving method:NA. 澯AIS澯ָ 澯ԭAIS״̬£2.5루+/- 0.5룩ʱûյAISԪ 飺 |
||
| hwAtmOamAlarmRdi | 1.3.6.1.4.1.2011.6.11.2.2.0.3 |
alarm description:RDI alarm explain RDI cell recieved from downstream. resolving method:Check if there is some defect in the downstream. 澯RDI澯 澯ԭյεRDIԪ 飺Ƿ |
||
| hwAtmOamAlarmRdiRestore | 1.3.6.1.4.1.2011.6.11.2.2.0.4 |
alarm description:RDI alarmrestore explain There is no RDI cell recieved from downstream within a time interval of 2.5 seconds, with a margin of 0.5 seconds, resolving method:NA. 澯RDI澯ָ 澯ԭRDI״̬£2.5루+/- 0.5룩ʱûյRDIԪ 飺 |
||
| hwAtmOamAlarmLoc | 1.3.6.1.4.1.2011.6.11.2.2.0.5 |
alarm description:LOC alarm explain CC sink can not recieve CC cells from source within a time interval of 3.5 seconds,with a margin of 0.5 seconds;Or physical fault is detected resolving method:Check if there is some physical fault.check if there is some defect bettween CC source and CC sink.check if CC source is configured turely. 澯LOC澯 澯ԭԼָܱĽյղCCԪ3.5루+/- 0.5)յϸ澯 飺鱾ǷϣCCԶ֮ͨ·Ƿ϶ǶԶCCûȷ |
||
| hwAtmOamAlarmLocRestore | 1.3.6.1.4.1.2011.6.11.2.2.0.6 |
alarm description:LOC alarm restore explain CC cells can be recieved from CC source.Or physical fault is restored. resolving method:NA 澯LOC澯ָ 澯ԭLOC״̬£յCCԪϻָ 飺 |
||
| hwAtmOamAlarmLbTerminate | 1.3.6.1.4.1.2011.6.11.2.2.0.7 |
alarm description:LB abort alarm explain1.The corresponding connection is deleted 2.There is some fault in the corresponding board. resolving method:Until the board changes normal, and renew configureing if necesssary 澯LBֹ澯 澯ԭ1.ӦѾɾ 2.ڵĵ巢 飺ȴָҪ½лز |
||
| hwAtmOamAlarmInsTerminate | 1.3.6.1.4.1.2011.6.11.2.2.0.8 |
alarm description:Insertion abort alarm explain1.The corresponding connection is deleted 2.There is some fault in the corresponding board. resolving method:Until the board changes normal, and renew configureing if necesssary 澯ֹ澯 澯ԭ1.ӦѾɾ 2.ڵĵ巢 飺ȴָҪ½в |
||
| hwAtmOamGeneralTraps | 1.3.6.1.4.1.2011.6.11.2.3 | |||
| hwAtmOamGeneralTrapsOids | 1.3.6.1.4.1.2011.6.11.2.3.0 | |||
| hwAtmOamTrapLoopbackReport | 1.3.6.1.4.1.2011.6.11.2.3.0.1 |
General trap description: Used to send loopback result of LB cell, success(1) or timeout(2). һTRAP : ڷͻԪĻؽɹ(1)ʱ(2) |
||