HPR-IP-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: HPR-IP-MIB
Download as:   
SNMPv2-CONF, APPN-MIB, SNMPv2-SMI, HPR-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hprIp 1.3.6.1.2.1.34.6.1.5
The MIB module for HPR over IP. This module contains two groups: - the HPR over IP Monitoring Group provides a count of the UDP packets sent by a link station for each APPN traffic type. - the HPR over IP Configuration Group provides for reading and setting the mappings between APPN traffic types and TOS Precedence settings in the IP header. These mappings are configured at the APPN port level, and are inherited by the APPN connection networks and link stations associated with an APPN port. A port-level mapping can, however, be overridden for a particular connection network or link station.
     hprIpActiveLsTable 1.3.6.1.2.1.34.6.1.5.1 no-access
The HPR/IP active link station table. This table provides counts of the number of UDP packets sent for each APPN traffic type.
         hprIpActiveLsEntry 1.3.6.1.2.1.34.6.1.5.1.1 no-access
Entry of the HPR/IP link station table.
             hprIpActiveLsLsName 1.3.6.1.2.1.34.6.1.5.1.1.1 displaystring no-access
Administratively assigned name for the link station. If this object has the same value as the appnLsName in the APPN MIB, then the two objects are referring to the same APPN link station.
             hprIpActiveLsAppnTrafficType 1.3.6.1.2.1.34.6.1.5.1.1.2 appntraffictype no-access
APPN traffic type being sent through the link station.
             hprIpActiveLsUdpPackets 1.3.6.1.2.1.34.6.1.5.1.1.3 counter32 read-only
The count of outgoing UDP packets carrying this type of APPN traffic. A discontinuity in the counter is indicated by the appnLsCounterDisconTime object in the APPN MIB.
     hprIpAppnPortTable 1.3.6.1.2.1.34.6.1.5.2 no-access
The HPR/IP APPN port table. This table supports reading and setting the mapping between APPN traffic types and TOS Precedence settings for all the link stations at this APPN port. This mapping can be overridden for an individual link station or an individual connection network via, respectively, the hprIpLsTOSPrecedence and the hprIpCnTOSPrecedence objects.
         hprIpAppnPortEntry 1.3.6.1.2.1.34.6.1.5.2.1 no-access
Entry of the HPR/IP APPN port table. Entries exist for every APPN port defined to support HPR over IP.
             hprIpAppnPortName 1.3.6.1.2.1.34.6.1.5.2.1.1 displaystring no-access
Administratively assigned name for this APPN port. If this object has the same value as the appnPortName in the APPN MIB, then the two objects are referring to the same APPN port.
             hprIpAppnPortAppnTrafficType 1.3.6.1.2.1.34.6.1.5.2.1.2 appntraffictype no-access
APPN traffic type sent through the port.
             hprIpAppnPortTOSPrecedence 1.3.6.1.2.1.34.6.1.5.2.1.3 appntosprecedence read-write
A setting for the three TOS Precedence bits in the IP Type of Service field for this APPN traffic type. When this value is changed via a Set operation, the new setting for the TOS Precedence bits takes effect immediately, rather than waiting for some event such as reinitialization of the port or of the APPN node itself.
     hprIpLsTable 1.3.6.1.2.1.34.6.1.5.3 no-access
The HPR/IP link station table. Values for TOS Precedence at the link station level override those at the level of the containing port. If there is no entry in this table for a given link station, then that link station inherits its TOS Precedence values from its port.
         hprIpLsEntry 1.3.6.1.2.1.34.6.1.5.3.1 no-access
Entry of the HPR/IP link station table.
             hprIpLsLsName 1.3.6.1.2.1.34.6.1.5.3.1.1 displaystring no-access
Administratively assigned name for the link station. If this object has the same value as the appnLsName in the APPN MIB, then the two objects are referring to the same APPN link station.
             hprIpLsAppnTrafficType 1.3.6.1.2.1.34.6.1.5.3.1.2 appntraffictype no-access
APPN traffic type sent through the link station.
             hprIpLsTOSPrecedence 1.3.6.1.2.1.34.6.1.5.3.1.3 appntosprecedence read-only
A setting for the three TOS Precedence bits in the IP Type of Service field for this APPN traffic type. When this value is changed via a Set operation, the new setting for the TOS Precedence bits takes effect immediately, rather than waiting for some event such as reinitialization of the port or of the APPN node itself.
             hprIpLsRowStatus 1.3.6.1.2.1.34.6.1.5.3.1.4 rowstatus read-only
This object allows entries to be created and deleted in the hprIpLsTable. As soon as an entry becomes active, the mapping between APPN traffic types and TOS Precedence settings that it specifies becomes effective. The value of the other accessible object in this entry, hprIpLsTOSPrecedence, can be changed via a Set operation when this object's value is active(1). An entry in this table is deleted by setting this object to destroy(6). Deleting an entry in this table causes the link station to revert to the default TOS Precedence mapping for its port.
     hprIpCnTable 1.3.6.1.2.1.34.6.1.5.4 no-access
The HPR/IP connection network table. Values for TOS Precedence at the connection network level override those at the level of the containing port. If there is no entry in this table for a given connection network, then that connection network inherits its TOS Precedence values from its port. A node may have connections to a given connection network through multiple ports. There is no provision in the HPR-IP architecture for variations in TOS Precedence values for a single connection network based on the port through which traffic is flowing to the connection network. Thus an entry in this table overrides the port-level settings for all the ports through which the node can reach the connection network.
         hprIpCnEntry 1.3.6.1.2.1.34.6.1.5.4.1 no-access
Entry of the HPR/IP connection network table.
             hprIpCnVrnName 1.3.6.1.2.1.34.6.1.5.4.1.1 snacontrolpointname no-access
SNA control point name of the virtual routing node (VRN) that identifies the connection network in the APPN topology database. If this object has the same value as the appnVrnName in the APPN MIB, then the two objects are referring to the same APPN VRN.
             hprIpCnAppnTrafficType 1.3.6.1.2.1.34.6.1.5.4.1.2 appntraffictype no-access
APPN traffic type sent to this connection network.
             hprIpCnTOSPrecedence 1.3.6.1.2.1.34.6.1.5.4.1.3 appntosprecedence read-only
A setting for the three TOS Precedence bits in the IP Type of Service field for this APPN traffic type. This setting applies to all traffic sent to this connection network by this node, regardless of the port through which the traffic is sent. When this value is changed via a Set operation, the new setting for the TOS Precedence bits takes effect immediately, rather than waiting for some event such as reinitialization of a port or of the APPN node itself.
             hprIpCnRowStatus 1.3.6.1.2.1.34.6.1.5.4.1.4 rowstatus read-only
This object allows entries to be created and deleted in the hprIpCnTable. As soon as an entry becomes active, the mapping between APPN traffic types and TOS Precedence settings that it specifies becomes effective. The value of the other accessible object in this entry, hprIpCnTOSPrecedence, can be changed via a Set operation when this object's value is active(1). An entry in this table is deleted by setting this object to destroy(6). Deleting an entry in this table causes the connection network to revert to the default TOS Precedence mapping for each port through which it is accessed.
     hprIpCompliance 1.3.6.1.2.1.34.6.2.1.2
Compliance statement for the HPR over IP MIB module.
     hprIpMonitoringGroup 1.3.6.1.2.1.34.6.2.2.5
An object for counting outgoing HPR/IP traffic for each APPN traffic type.
     hprIpConfigurationGroup 1.3.6.1.2.1.34.6.2.2.6
A collection of HPR/IP objects representing the mappings between APPN traffic types and TOS Precedence bits at the APPN port, APPN link station, and APPN connection network levels.