HPN-ICF-MPLSOAM-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HPN-ICF-MPLSOAM-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpnicfMplsOam 1.3.6.1.4.1.11.2.14.11.15.2.79
This MIB contains objects to configure OAM module. The Operation, Administration and Maintenance (OAM) is an effective means for decreasing the cost of network maintenance. The MPLS OAM is used to administrate and maintain MPLS.
       hpnicfMplsOamScalarGroup 1.3.6.1.4.1.11.2.14.11.15.2.79.1
           hpnicfMplsOamCapability 1.3.6.1.4.1.11.2.14.11.15.2.79.1.1 truthvalue read-write
Whether OAM is globally capable. false: incapable; true: capable; The default value is incapable.
           hpnicfMplsOamTrapOpen 1.3.6.1.4.1.11.2.14.11.15.2.79.1.2 truthvalue read-write
Whether OAM trap is globally enabled. false: disable; true: enable; The default value is disable.
       hpnicfMplsOamTable 1.3.6.1.4.1.11.2.14.11.15.2.79.2
           hpnicfMplsOamIgrTable 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1 no-access
This table specifies per-LSP MPLS OAM ingress capability and associated information, such as IgrLspName and IgrDetType.
               hpnicfMplsOamIgrEntry 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1 no-access
An entry in this table is created by an LSR for every LSP capable of supporting MPLS OAM at ingress.
                   hpnicfMplsOamIgrIndex 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.1 unsigned32 no-access
This is an unique index for an OAM ingress entry in the OAM table.
                   hpnicfMplsOamIgrLspName 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.2 octet string read-only
The name of an LSP. It means the LSP name of the detected LSP.
                   hpnicfMplsOamIgrDetectType 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.3 integer read-only
There are two types of OAM packets, CV and FFD. The CV flow is generated at the source LSR of the LSP with a nominal frequency of 1/s and terminated at the sink LSR of the LSP. FFD provides failure detection option for an LSP independent of the CV based availability model and is not tied to the CV insertion rate. Insertion rates at 1/s or faster may also be used. The CV/FFD packet contains a network-unique identifier (TTSI) so that all types of defects can be detected. 1: CV; 2: FFD. Enumeration: 'ffd': 2, 'cv': 1.
                   hpnicfMplsOamIgrDetectFreq 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.4 hpnicfmplsoamdetectfreq read-only
Indication of the OAM's frequent type.
                   hpnicfMplsOamIgrRevType 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.5 integer read-only
When an LSP is found to be in defect, the sink LSR of the LSP should send BDI to inform the source LSR of the LSP, the BDI is transferred through the reverse LSP. The type of reverse LSP can be private or shared. If private, then the reverse LSP can be used only by the oam ingress; If shared, the reverse LSP which is shared between many forward LSPs, whose source LSRs are the same and sink LSRs are the same. 1: private; 2: share. Enumeration: 'share': 2, 'private': 1.
                   hpnicfMplsOamIgrRevLspName 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.6 octet string read-only
The object indicates the name of the reverse LSP.
                   hpnicfMplsOamIgrLspId 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.7 integer32 read-only
For ingress, the object indicates the lsp ID of the detected LSP.
                   hpnicfMplsOamIgrEnable 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.8 truthvalue read-only
Whether one LSP is OAM enable. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and checked at the sink LSR of the LSP, and user can set other configuration. false: The OAM function is disabled on the ingress; true: The OAM function is enabled on the ingress.
                   hpnicfMplsOamIgrDefectType 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.9 hpnicfmplsoamdefecttype read-only
Indication of the OAM's defect type.
                   hpnicfMplsOamIgrRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.10 rowstatus read-only
This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, hpnicfMplsOamIgrLspName, hpnicfMplsOamIgrDetectType, hpnicfMplsOamIgrDetectFreq, hpnicfMplsOamIgrRevType, hpnicfMplsOamIgrRevLspName, and hpnicfMplsOamIgrLspId must be specified.
           hpnicfMplsOamEgrTable 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2 no-access
This table specifies per-LSP MPLS OAM capability and associated information, such as DetectType, DetectFrequency.
               hpnicfMplsOamEgrEntry 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1 no-access
An entry in this table is created by an LSR for every LSP capable of supporting MPLS OAM at egress.
                   hpnicfMplsOamEgrIndex 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.1 unsigned32 no-access
This is a unique index for an OAM egress entry in the OAM table.
                   hpnicfMplsOamEgrLspName 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.2 octet string read-only
The object indicates the name of static LSP at egress.
                   hpnicfMplsOamEgrDetectType 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.3 integer read-only
There are two types of OAM packets, CV and FFD. The CV flow is generated at the source LSR of the LSP with a nominal frequency of 1/s and terminated at the sink LSR of the LSP. FFD provides failure detection option for an LSP independent of the CV based availability model and is not tied to the CV insertion rate. Insertion rates at 1/s or faster may also be used. The CV/FFD packet contains a network-unique identifier (TTSI) so that all types of defects can be detected. 1: CV; 2: FFD. Enumeration: 'ffd': 2, 'cv': 1.
                   hpnicfMplsOamEgrDetectFreq 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.4 hpnicfmplsoamdetectfreq read-only
Indication of the OAM's frequent type.
                   hpnicfMplsOamEgrRevType 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.5 integer read-only
When an LSP is found to be in defect, the sink LSR of the LSP should send BDI to inform the source LSR of the LSP, the BDI is transferred through the reverse LSP. The type of reverse LSP can be private or shared. If private, then the reverse LSP can be used only when the only LSP in defect; If shared, the reverse LSP, which is shared between many forward LSPs that have the same source LSRs and sink LSRs. 1: private; 2: share. Enumeration: 'share': 2, 'private': 1.
                   hpnicfMplsOamEgrRevLspName 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.6 octet string read-only
The object indicates the name of a reverse static-lsp.
                   hpnicfMplsOamEgrLsrId 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.7 ipaddress read-only
The object indicates the Ingress LSR ID of the LSP.
                   hpnicfMplsOamEgrLspId 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.8 integer32 read-only
The object indicates the the Ingress session lsp ID of the detected static-LSP.
                   hpnicfMplsOamEgrEnable 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.9 truthvalue read-only
Whether one LSP is enabled with OAM. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and checked at the sink LSR of the LSP, and user can set other configuration. false: The OAM function is disabled on the egress; true: The OAM function is enabled on the egress.
                   hpnicfMplsOamEgrDefectType 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.10 hpnicfmplsoamdefecttype read-only
Indication of the OAM's defect type.
                   hpnicfMplsOamEgrRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.11 rowstatus read-only
This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, hpnicfMplsOamEgrLspName, hpnicfMplsOamEgrDetectType, hpnicfMplsOamEgrDetectFreq, hpnicfMplsOamEgrRevType, hpnicfMplsOamEgrRevLspName, hpnicfMplsOamEgrLsrId and hpnicfMplsOamEgrLspId must be specified.
       hpnicfMplsOamNotifications 1.3.6.1.4.1.11.2.14.11.15.2.79.3
           hpnicfMplsOamIgrLSPOutDefect 1.3.6.1.4.1.11.2.14.11.15.2.79.3.1
This notification is generated when the LSP is found out of the defect state at the LSP ingress.
           hpnicfMplsOamIgrLSPInDefect 1.3.6.1.4.1.11.2.14.11.15.2.79.3.2
This notification is generated when the LSP is found in the defect state at the LSP ingress.
           hpnicfMplsOamEgrLSPOutDefect 1.3.6.1.4.1.11.2.14.11.15.2.79.3.3
This notification is generated when the LSP is found out of the defect state at the LSP egress.
           hpnicfMplsOamEgrLSPInDefect 1.3.6.1.4.1.11.2.14.11.15.2.79.3.4
This notification is generated when the LSP is found in the defect state at the LSP egress.