HOTWIRE-MSDSL-INTERFACE-MIB: View SNMP OID List / Download MIB

VENDOR: PARADYNE


 Home MIB: HOTWIRE-MSDSL-INTERFACE-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, PDN-HEADER-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 msdslDevice 1.3.6.1.4.1.1795.2.24.2.6.15.1
     msdslCurrent 1.3.6.1.4.1.1795.2.24.2.6.15.1.1
         msdslCurrentTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1 no-access
The MSDSL Current 15 minute interval table.
             msdslCurrentEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1 no-access
An entry in the MSDSL Current table.
                 msdslCurrentIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.1 integer read-only
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
                 msdslCurrentESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.2 gauge read-only
The number of Errored Seconds, encountered by a MSDSL interface in the current 15 minute inter- val.
                 msdslCurrentSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.3 gauge read-only
The number of Severely Errored Seconds encoun- tered by a msdsl interface in the current 15 minute interval.
                 msdslCurrentFEBEs 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.4 gauge read-only
The number of Far End Block Errors (FEBE) en- countered by a MSDSL interface in the current 15 minute interval.
                 msdslErrEventsCounter 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.5 integer read-only
An error event is a CRC error, maximum count is 65,535. If the count reaches 65,535 it will remain at that value until reset. Reset is when the near end data is cleared.
                 msdslErrTimeElapsed 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.6 integer read-only
The number of seconds that have elapsed since the beginning of the current error-measurment period.
                 msdslErrValidIntervals 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.7 integer read-only
The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which case the value will be the number of complete 15 minute intervals since the interface has been online.
     msdslInterval 1.3.6.1.4.1.1795.2.24.2.6.15.1.2
         msdslIntervalTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2 no-access
An MSDSL Interval table.
             msdslIntervalEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1 no-access
An entry in the MSDSL Interval table.
                 msdslIntervalIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.1 integer read-only
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
                 msdslIntervalNumber 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.2 integer read-only
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid).
                 msdslIntervalESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.3 gauge read-only
The number of Errored Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
                 msdslIntervalSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.4 gauge read-only
The number of Severely Errored Seconds encoun- tered by a DSL interface in one of the previous 96, individual 15 minute, intervals.
                 msdslIntervalFEBEs 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.5 gauge read-only
The number of Far End Block Errors encountered by a MSDSL interface in one of the previous 96, individual 15 minute, intervals.
     msdslWorstInterval 1.3.6.1.4.1.1795.2.24.2.6.15.1.3
         msdslWorstIntervalTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3 no-access
The MSDSL Worst Interval table.
             msdslWorstIntervalEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1 no-access
An entry in the msdsl Worst Interval table.
                 msdslWorstIntervalIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1.1 integer read-only
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
                 msdslWorstIntervalESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1.2 integer read-only
The value (1 to 96) indicating the interval containing the worst Errored Seconds encountered by a DSL interface.
                 msdslWorstIntervalSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1.3 integer read-only
The value (1 to 96) indicating the interval containing the worst Errored Seconds encountered by a DSL interface.
                 msdslWorstIntervalFEBEs 1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1.4 integer read-only
The value (1 to 96) indicating the interval containing the worst Errored Seconds encountered by a DSL interface.
     msdslTotal 1.3.6.1.4.1.1795.2.24.2.6.15.1.4
         msdslTotalTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4 no-access
The DSL Total table. 24 hour interval.
             msdslTotalEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1 no-access
An entry in the DSL Total table.
                 msdslTotalIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1.1 integer read-only
The index value which uniquely identifies the DSL interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a msdslLineIfIndex object instance.
                 msdslTotalESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1.2 gauge read-only
The number of Errored Seconds encountered by a DSL interface in the previous 24 hour interval
                 msdslTotalSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1.3 gauge read-only
The number of Severely Errored Seconds encoun- tered by a DSL interface in the previous 24 hour interval.
                 msdslTotalFEBEs 1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1.4 gauge read-only
The number of Far End Block Errors ( FEBE) encountered by a DSL interface in the previous 24 hour interval.
     msdslFarEndCurrent 1.3.6.1.4.1.1795.2.24.2.6.15.1.5
         msdslFarEndCurrentTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5 no-access
The MSDSL Current table.
             msdslFarEndCurrentEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1 no-access
An entry in the MSDSL Current table.
                 msdslFarEndCurrentIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1.1 integer read-only
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
                 msdslFarEndCurrentESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1.2 gauge read-only
The number of Errored Seconds, encountered by a MSDSL interface in the current 15 minute inter- val.
                 msdslFarEndCurrentSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1.3 gauge read-only
The number of Severely Errored Seconds encoun- tered by a msdsl interface in the current 15 minute interval.
                 msdslFarEndCurrentFEBEs 1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1.4 gauge read-only
The number of Far End Block Errors (FEBE) en- countered by a MSDSL interface in the current 15 minute interval.
     msdslFarEndInterval 1.3.6.1.4.1.1795.2.24.2.6.15.1.6
         msdslFarEndIntervalTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6 no-access
The MSDSL Far End Interval table.
             msdslFarEndIntervalEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1 no-access
An entry in the msdsl Interval table.
                 msdslFarEndIntervalIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.1 integer read-only
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
                 msdslFarEndIntervalNumber 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.2 integer read-only
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid).
                 msdslFarEndIntervalESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.3 gauge read-only
The number of Errored Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
                 msdslFarEndIntervalSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.4 gauge read-only
The number of Severely Errored Seconds encoun- tered by a DSL interface in one of the previous 96, individual 15 minute, intervals.
                 msdslFarEndIntervalFEBEs 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.5 gauge read-only
The number of Far End Block Errors encountered by a MSDSL interface in one of the previous 96, individual 15 minute, intervals.
     msdslFarEndWorstInterval 1.3.6.1.4.1.1795.2.24.2.6.15.1.7
         msdslFarEndWorstIntervalTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7 no-access
The MSDSL Far End Interval table.
             msdslFarEndWorstIntervalEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1 no-access
An entry in the msdsl Worst Interval table.
                 msdslFarEndWorstIntervalIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1.1 integer read-only
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
                 msdslFarEndWorstIntervalESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1.2 integer read-only
The number of Far End Block Errors encountered by a MSDSL interface in one of the previous 96, individual 15 minute, intervals.
                 msdslFarEndWorstIntervalSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1.3 integer read-only
The value (1 to 96) indicating the interval containing the worst Errored Seconds encountered by a DSL interface.
                 msdslFarEndWorstIntervalFEBEs 1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1.4 integer read-only
The value (1 to 96) indicating the interval containing the worst Errored Seconds encountered by a DSL interface.
     msdslFarEndTotal 1.3.6.1.4.1.1795.2.24.2.6.15.1.8
         msdslFarEndTotalTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8 no-access
The DSL Total table. 24 hour interval.
             msdslFarEndTotalEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1 no-access
An entry in the DSL Total table.
                 msdslFarEndTotalIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1.1 integer read-only
The index value which uniquely identifies the DSL interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a msdslLineIfIndex object instance.
                 msdslFarEndTotalESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1.2 gauge read-only
The number of Errored Seconds encountered by a DSL interface in the previous 24 hour interval
                 msdslFarEndTotalSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1.3 gauge read-only
The number of Severely Errored Seconds encoun- tered by a DSL interface in the previous 24 hour interval.
                 msdslFarEndTotalFEBEs 1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1.4 gauge read-only
The number of Far End Block Errors ( FEBE) encountered by a DSL interface in the previous 24 hour interval.
     msdslCurrentPerf 1.3.6.1.4.1.1795.2.24.2.6.15.1.9
         msdslCurrentPerfTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9 no-access
The MSDSL Current Peformance Statistics table.
             msdslCurrentPerfEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1 no-access
An entry in the MSDSL Current performance table.
                 msdslCurrentPerfIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.1 integer read-only
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
                 msdslCurrentPerfMargin 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.2 gauge read-only
The average Margin value for the current 15 minute interval.
                 msdslCurrentPerfTxPwr 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.3 gauge read-only
The average value of the Transmit power in the current 15 minute interval.
                 msdslCurrentPerfRxGain 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.4 gauge read-only
The average value of the Receiver gain the current 15 minute interval.
                 msdslPerfPayloadRate 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.5 gauge read-only
An estimate of the interface's current bandwidth in bits per second. Current range is: 64k to 2048k.
                 msdslTimeElapsed 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.6 integer read-only
The number of seconds that have elapsed since the beginning of the current error-measurment period.
                 msdslValidIntervals 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.7 integer read-only
The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which case the value will be the number of complete 15 minute intervals since the interface has been online.
     msdslIntervalPerf 1.3.6.1.4.1.1795.2.24.2.6.15.1.10
           msdslIntervalPerfTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10 no-access
The MSDSL Interval table.
                 msdslIntervalPerfEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1 no-access
An entry in the msdsl Interval performance table.
                     msdslIntervalPerfIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.1 integer read-only
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
                     msdslIntervalPerfNumber 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.2 integer read-only
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid).
                     msdslIntervalPerfMargin 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.3 gauge read-only
The average Margin for a DSL interface in one of the previous 96, individual 15 minute, intervals.
                     msdslIntervalPerfTxPwr 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.4 gauge read-only
The average Transmit Power on a DSL interface in one of the previous 96, individual 15 minute, intervals.
                     msdslIntervalPerfRxGain 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.5 gauge read-only
The average RxGain on a DSL interface in one of the previous 96, individual 15 minute, intervals.
     msdslFarEndCurrentPerf 1.3.6.1.4.1.1795.2.24.2.6.15.1.11
           msdslFarEndCurrentPerfTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11 no-access
The MSDSL Current Peformance Statistics table.
                 msdslFarEndCurrentPerfEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1 no-access
An entry in the MSDSL Current performance table.
                     msdslFarEndCurrentPerfIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1.1 integer read-only
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
                     msdslFarEndCurrentPerfMargin 1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1.2 gauge read-only
The average Margin value for the current 15 minute interval.
                     msdslFarEndCurrentPerfTxPwr 1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1.3 gauge read-only
The average value of the Transmit power in the current 15 minute interval.
                     msdslFarEndCurrentPerfRxGain 1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1.4 gauge read-only
The average value of the Receiver gain the current 15 minute interval.
     msdslFarEndIntervalPerf 1.3.6.1.4.1.1795.2.24.2.6.15.1.12
           msdslFarEndIntervalPerfTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12 no-access
The MSDSL Interval table.
                 msdslFarEndIntervalPerfEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1 no-access
An entry in the msdsl Interval performance table.
                     msdslFarEndIntervalPerfIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.1 integer read-only
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
                     msdslFarEndIntervalPerfNumber 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.2 integer read-only
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid).
                     msdslFarEndIntervalPerfMargin 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.3 gauge read-only
The average Margin value for the current 15 minute interval.
                     msdslFarEndIntervalPerfTxPwr 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.4 gauge read-only
The average value of the Transmit power in the current 15 minute interval.
                     msdslFarEndIntervalPerfRxGain 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.5 gauge read-only
The average value of the Receiver gain the current 15 minute interval.
     msdsldsx1WorstInterval 1.3.6.1.4.1.1795.2.24.2.6.15.1.13
           msdsldsx1WorstIntervalTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13 no-access
The MSDSL DSX1 Worst Interval table.
                 msdsldsx1WorstIntervalEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1 no-access
An entry in the msdsl DSX1 Worst Interval table.
                     msdsldsx1WorstIntervalIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.1 integer read-only
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
                     msdsldsx1WorstIntervalESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.2 integer read-only
The number of Errored Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
                     msdsldsx1WorstIntervalUASs 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.3 integer read-only
The number of Unavailable Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
                     msdsldsx1WorstIntervalSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.4 integer read-only
The number of Severely Errored Seconds encoun- tered by a DSL interface in one of the previous 96, individual 15 minute, intervals.
                     msdsldsx1WorstIntervalBESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.5 integer read-only
The number of Bursty Errored Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
                     msdsldsx1WorstIntervalCSSs 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.6 integer read-only
The number of Controlled Slip Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
                     msdsldsx1WorstIntervalLOFC 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.7 integer read-only
The number of Loss of Frame Counts encountered by a MSDSL interface in one of the previous 96, individual 15 minute, intervals.
     msdslG703WorstInterval 1.3.6.1.4.1.1795.2.24.2.6.15.1.14
           msdslG703WorstIntervalTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14 no-access
The MSDSL G.703 Worst Interval table.
                 msdslG703WorstIntervalEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1 no-access
An entry in the msdsl G.703 Worst Interval table.
                     msdslG703WorstIntervalIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.1 integer read-only
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
                     msdslG703WorstIntervalESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.2 integer read-only
The number of Errored Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
                     msdslG703WorstIntervalUASs 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.3 integer read-only
The number of Unavailable Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
                     msdslG703WorstIntervalSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.4 integer read-only
The number of Severely Errored Seconds encoun- tered by a DSL interface in one of the previous 96, individual 15 minute, intervals.
                     msdslG703WorstIntervalBESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.5 integer read-only
The number of Bursty Errored Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
                     msdslG703WorstIntervalCSSs 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.6 integer read-only
The number of Controlled Slip Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
                     msdslG703WorstIntervalLOFC 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.7 integer read-only
The number of Loss of Frame Counts encountered by a MSDSL interface in one of the previous 96, individual 15 minute, intervals.
     msdslConfiguration 1.3.6.1.4.1.1795.2.24.2.6.15.1.15
           msdslFracTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28 no-access
The Paradyne MSDSL Cross Connect Table.
                 msdslFracEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1 no-access
An entry in the Paradyne MSDSL Cross Connect Table.
                     msdslFracPortIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.1 integer read-only
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex from the Interfaces table of MIB II (RFC 1213).
                     msdslFracPortTS 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.2 integer read-write
The Time Slot number associated with the interface identified by msdslFracPortIndex for this entry. If the allocation method is ds1ByPass then this object is not required since the whole port specified by msdslFracPortIndex will be assigned to the corresponding msdslFracPortIfIndex. If the allocation method is ds1CrossConn then this object is also not required since the whole port specified by msdslFracPortIndex will be assigned to the port specified by msdslFracPortIfIndex. If the allocation method is ds0CrossConn, then this object specifies the Time Slot associated with the interface identified by msdslFracPortIndex for this entry.
                     msdslFracPortIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.3 integer read-write
An index value that uniquely identifies the interface to which this entry is mapped. The interface identified by a particular value of this index is the same interface as identified by the same value of an ifIndex object instance If no interface is currently using the Time Slot identified by msdslFracPortTS, then this value should be zero. This is used to unassign the Time Slot. If a single interface occupies more than one time slot, then its ifIndex value is found in multiple time slots (i.e., there are multiple entries in table with the same msdslFracPortIfIndex value).
                     msdslFracPortIfTS 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.4 integer read-write
The Time Slot associated with the interface identified by msdslFracPortIfIndex for this entry. If the allocation method is ds1ByPass then this object is not required since the whole port specified by msdslFracPortIndex will be assigned to the corresponding msdslFracPortIfIndex. If the allocation method is ds1CrossConn then this object is also not required since the whole port specified by msdslFracPortIndex will be assigned to the port specified by msdslFracPortIfIndex. If the allocation method is ds0CrossConn, then this object specifies the Time Slot associated with the interface identified by msdslFracPortIfIndex for this entry.
                     msdslFracPortVoiceData 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.5 integer read-write
The Current mode for this DS0. Enumeration: 'voice': 1, 'data': 2.
           msdslPortConfigAllocMethodTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.29 no-access
The Paradyne MSDSL Cross Connect Allocation Method Table.
                 msdslPortConfigAllocMethodEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.29.1 no-access
An entry in the Paradyne MSDSL Cross Connect Table Allocation Method
                     msdslPortConfigAllocMethodIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.29.1.1 integer read-only
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex from the Interfaces table of MIB II (RFC 1213).
                     msdslPortConfigAllocMethod 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.29.1.2 integer read-write
The Current allocation method for this device. Where: ds1ByPass: In this mode the entire WAN interface is connected directly to the DSL interface. This connection provides minimal delay. Changing to this allocation method will automatically do the following assignments: WAN port 1 >>> DSL Port 1 WAN port 2 >>> DSL Port 2 WAN port 3 >>> DSL Port 3 WAN port 4 >>> DSL Port 4 WAN port 5 >>> DSL Port 5 WAN port 6 >>> DSL Port 6 WAN port 7 >>> DSL Port 7 WAN port 8 >>> DSL Port 8 ds1CrossConn: In this mode the individual WAN ports may be connected to individual DSL ports through the cross connect circuitry. This connection must use the System Clock for the timing source. Changing to this allocation method will unassign all the time slots for this interface and any time slots to the connected interface. For example: WAN port 1 >>> DSL Port 8 WAN port 2 >>> DSL Port 7 WAN port 3 >>> DSL Port 6 WAN port 4 >>> DSL Port 5 WAN port 5 >>> DSL Port 1 WAN port 6 >>> DSL Port 2 WAN port 7 >>> Not Assigned WAN port 8 >>> WAN Port 7 ds0CrossConn: This mode assigns individual time slots. Any timeslot from any WAN interface may be connected to any timeslot of any DSL interface. Changing to this allocation method will unassign all the time slots for this interface and any time slots to the connected interface. notAssigned: This indicates that this interface is not assigned. Changing to this allocation method will unassign all the time slots for this interface and any time slots to the connected interface. disabled: This is a Read Only value indicating that the interface is disabled. NOTE: Going from one mode to another mode will unassign all the time slots for that interface and the interface it was connected to. The only exception being ds1ByPass mode. When going from any mode to ds1ByPass, all the Time Slots will be assigned Network port to WAN port. These assignments, however, do not use the cross connect circuitry. Enumeration: 'notAssigned': 4, 'ds0CrossConn': 3, 'ds1CrossConn': 2, 'ds1ByPass': 1, 'disabled': 5.
       msdslMarginLow 1.3.6.1.4.1.1795.2.24.2.6.15.10.3
This trap signifies that the margin estimate is below a customer set threshold value. This is a trap of 'minor' class.
       msdslErrorRateHigh 1.3.6.1.4.1.1795.2.24.2.6.15.10.4
This trap signifies that the error rate estimates is above a customer set threshold value. This is a trap of 'minor' class.
       msdslNTUTypeMismatch 1.3.6.1.4.1.1795.2.24.2.6.15.10.7
The LTU configured does NOT match with the NTU connected to the DSL port indicated by the ifIndex.
       msdslMarginNormal 1.3.6.1.4.1.1795.2.24.2.6.15.10.103
This trap signifies that the margin estimate has gone above a customer set threshold value. this is a trap of 'minor' class. this trap compliments the xdslMarginLow trap
       msdslErrorRateNormal 1.3.6.1.4.1.1795.2.24.2.6.15.10.104
This trap signifies that the error rate estimates gone below a customer set threshold value. This is a trap of 'minor' class. This trap compliments the xdslErrorRateHigh trap.
       msdslTestOver 1.3.6.1.4.1.1795.2.24.2.6.15.10.106
This trap signifies that the test has completed on one of the ports. This trap compliments the xdslTestStart trap.