HM2-NAT-MIB: View SNMP OID List / Download MIB

VENDOR: RICHARD HIRSCHMANN


 Home MIB: HM2-NAT-MIB
Download as:   
SNMPv2-CONF, IF-MIB, HM2-TC-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hm2NatMib 1.3.6.1.4.1.248.11.80
This MIB defines the SNMP interface for Hirschmann DNAT/SNAT/ Double NAT/1:1 NAT implementations Copyright (C)
       hm2NatNotifications 1.3.6.1.4.1.248.11.80.0
           hm2DnatRuleAppliedTrap 1.3.6.1.4.1.248.11.80.0.1
A rule of DNAT was applied. The rule is identified by the given rule index of the rule table.
           hm2DnatRuleAppliedAndLoggedTrap 1.3.6.1.4.1.248.11.80.0.2
A rule of DNAT was applied and logged according to the current logging mechanism. The rule is identified by the given rule index of the rule table.
           hm21to1RuleAppliedTrap 1.3.6.1.4.1.248.11.80.0.5
A rule of 1:1 NAT was applied. The rule is identified by the given rule index of the rule table.
           hm21to1RuleAppliedAndLoggedTrap 1.3.6.1.4.1.248.11.80.0.6
A rule of 1:1 NAT was applied and logged according the current logging mechanism. The rule is identified by the given rule index of the rule table.
           hm2MasqRuleAppliedTrap 1.3.6.1.4.1.248.11.80.0.7
A rule of masquerading was applied. The rule is identified by the given rule index of the rule table.
           hm2MasqRuleAppliedAndLoggedTrap 1.3.6.1.4.1.248.11.80.0.8
A rule of masquerading was applied and logged according the current logging mechanism. The rule is identified by the given rule index of the rule table.
           hm2DonatRuleAppliedTrap 1.3.6.1.4.1.248.11.80.0.9
A rule of double NAT was applied. The rule is identified by the given rule index of the rule table.
           hm2DonatRuleAppliedAndLoggedTrap 1.3.6.1.4.1.248.11.80.0.10
A rule of double NAT was applied and logged according the current logging mechanism. The rule is identified by the given rule index of the rule table.
       hm2NatObjects 1.3.6.1.4.1.248.11.80.1
           hm2NatGeneralSettings 1.3.6.1.4.1.248.11.80.1.1
               hm2DnatMaxRules 1.3.6.1.4.1.248.11.80.1.1.2 integer32 read-only
Maximum number of allowed rules for DNAT.
               hm2OneToOneNatMaxRules 1.3.6.1.4.1.248.11.80.1.1.3 integer32 read-only
Maximum number of allowed rules for 1:1 NAT.
               hm2MasqMaxRules 1.3.6.1.4.1.248.11.80.1.1.4 integer32 read-only
Maximum number of allowed rules for Masquerading.
               hm2DoubleNatMaxRules 1.3.6.1.4.1.248.11.80.1.1.5 integer32 read-only
Maximum number of allowed rules for Double NAT.
               hm2NatResetStatistics 1.3.6.1.4.1.248.11.80.1.1.6 hmactionvalue read-write
Setting this value to action(2) will reset the statistics of the whole NAT module. It will be set to noop(1) automatically after reset.
           hm2Dnat 1.3.6.1.4.1.248.11.80.1.2
               hm2DnatRules 1.3.6.1.4.1.248.11.80.1.2.1
                   hm2DnatRulesObjects 1.3.6.1.4.1.248.11.80.1.2.1.1
                       hm2DnatRuleCount 1.3.6.1.4.1.248.11.80.1.2.1.1.1 integer32 read-only
Number of current DNAT rules
                       hm2DnatIfMappingRuleCount 1.3.6.1.4.1.248.11.80.1.2.1.1.2 integer32 read-only
Number of current DNAT IF mapping entries.
                       hm2DnatRulePendingActions 1.3.6.1.4.1.248.11.80.1.2.1.1.3 truthvalue read-only
This value describes, whether the DNAT rule table was modified but not yet written to the firewall implementation (set to true). After writing all modifications to the firewall, the value switches automatically back to false.
                       hm2DnatCommitPendingActions 1.3.6.1.4.1.248.11.80.1.2.1.1.4 hmactionvalue read-write
Setting this value to action(2) writes not yet committed changes to the firewall (DNAT and Interface Mapping Table). After writing all modifications, the value switches automatically back to noop(1).
                   hm2DnatRulesTables 1.3.6.1.4.1.248.11.80.1.2.1.2
                       hm2DnatRuleTable 1.3.6.1.4.1.248.11.80.1.2.1.2.1 no-access
The list of DNAT rules for this firewall.
                           hm2DnatRuleEntry 1.3.6.1.4.1.248.11.80.1.2.1.2.1.1 no-access
DNAT rule entry.
                               hm2DnatRuleIndex 1.3.6.1.4.1.248.11.80.1.2.1.2.1.1.1 integer32 no-access
Rule index of this DNAT rule.
                               hm2DnatSourceAddress 1.3.6.1.4.1.248.11.80.1.2.1.2.1.1.3 displaystring read-only
Source address of packets to be NATed. Can be: - Single address (a.b.c.d), - address range in CIDR notation (a.b.c.d/n) - the name of a Netobject ($NetobjectName) - 'any' for no filtering at all - a prepending '!' selects the complement set
                               hm2DnatSourcePort 1.3.6.1.4.1.248.11.80.1.2.1.2.1.1.4 displaystring read-only
The source port of the packet to reroute. Allowed formats are: - keyword 'any' for no filtering or a protocol without ports - single port ('10') - port range with first and last port separated by hyphen ('10-15') - comma separated list of ports ('1235,25,123') - combination of the points above ('10,25-30,125,1993') The number of named ports (1 for each individual port, 2 for port ranges) must not exceed 15.
                               hm2DnatTargetAddress 1.3.6.1.4.1.248.11.80.1.2.1.2.1.1.5 displaystring read-only
Destination address of packets to be NATed. Can be: - Single address (a.b.c.d), - address range in CIDR notation (a.b.c.d/n) - the name of a Netobject ($NetobjectName) - 'any' for no filtering at all - a prepending '!' selects the complement set
                               hm2DnatTargetPort 1.3.6.1.4.1.248.11.80.1.2.1.2.1.1.6 displaystring read-only
The target port of the packet to reroute. Allowed formats are: - keyword 'any' - single port ('10') - port range with first and last port separated by hyphen ('10-15') - comma separated list of ports ('1235,25,123') - combination of the points above ('10,25-30,125,1993') The number of named ports (1 for each individual port, 2 for port ranges) must not exceed 15.
                               hm2DnatNewTargetAddress 1.3.6.1.4.1.248.11.80.1.2.1.2.1.1.7 displaystring read-only
The IP address of the machine to reroute packets to. Must be a single IP address (a.b.c.d).
                               hm2DnatNewTargetPort 1.3.6.1.4.1.248.11.80.1.2.1.2.1.1.8 displaystring read-only
The port to reroute packets to. Must be a single port or 'any'.
                               hm2DnatProto 1.3.6.1.4.1.248.11.80.1.2.1.2.1.1.9 integer read-only
The IP protocol (RFC 791) for protocol-independent filtering. The following values are currently supported: o icmp(1): Internet Control Message Protocol (RFC 792) o igmp(2): Internet Group Management Protocol o ipip(3): IP in IP tunneling (RFC 1853) o tcp(4): Transmission Control Protocol (RFC 793) o udp(5): User Datagram Protocol (RFC 768) o esp(6): IPsec Encapsulated Security Payload (RFC 2406) o ah(7): IPsec Authentication Header (RFC 2402) o icmpv6(8): Internet Control Message Protocol for IPv6 o any(9): apply to all protocols Enumeration: 'udp': 5, 'esp': 6, 'ah': 7, 'ipip': 3, 'tcp': 4, 'icmpv6': 8, 'icmp': 1, 'any': 9, 'igmp': 2.
                               hm2DnatRuleParams 1.3.6.1.4.1.248.11.80.1.2.1.2.1.1.10 displaystring read-only
Additional parameters to this rule as string. Currently only the value 'none' is valid. Reserved for future use.
                               hm2DnatLog 1.3.6.1.4.1.248.11.80.1.2.1.2.1.1.11 truthvalue read-only
Set to true if application of this rule shall be logged.
                               hm2DnatTrap 1.3.6.1.4.1.248.11.80.1.2.1.2.1.1.12 truthvalue read-only
Set to true if application of this rule shall send a trap.
                               hm2DnatRowStatus 1.3.6.1.4.1.248.11.80.1.2.1.2.1.1.13 rowstatus read-only
This is a standard row status value: - active(1): The rule is active. Note that until committed, the rule will not be applied. - notInService(2): The rule is inactive because of user action. - notReady(3):The rule is inactive because it has an incomplete configuration. - createAndGo(4): Create the rule with default parameters activated. - createAndWait(5): Create the rule inactive. - destroy(6): Delete the rule. You cannot delete a rule with interface mappings to it.
                               hm2DnatDescription 1.3.6.1.4.1.248.11.80.1.2.1.2.1.1.14 displaystring read-only
User defined textual description related to this rule.
                       hm2DnatRuleIfMappingTable 1.3.6.1.4.1.248.11.80.1.2.1.2.2 no-access
Table for mapping DNAT rules to interfaces.
                           hm2DnatRuleIfMappingEntry 1.3.6.1.4.1.248.11.80.1.2.1.2.2.1 no-access
Entry in rule interface mapping table.
                               hm2DnatIfmRuleIndex 1.3.6.1.4.1.248.11.80.1.2.1.2.2.1.1 integer32 no-access
The index of the DNAT rule this mapping entry is assigned to.
                               hm2DnatIfmDirection 1.3.6.1.4.1.248.11.80.1.2.1.2.2.1.2 integer no-access
For DNAT, this can only be set to ingress, which is the interface on which a packet that is to be forwarded will arrive. Enumeration: 'both': 3, 'ingress': 1, 'egress': 2.
                               hm2DnatIfmPriority 1.3.6.1.4.1.248.11.80.1.2.1.2.2.1.3 unsigned32 read-only
The priority is the sorting key for rules in the chain to this interface. They don't need to be unique per interface, but in that case, no clear order can be assumed. Priorities are processed in ascending order (0 highest priority).
                               hm2DnatIfmInterface 1.3.6.1.4.1.248.11.80.1.2.1.2.2.1.4 interfaceindex no-access
The interface this mapping entry is assigned to. This has to be either an hm2AgentSwitchIpInterfaceIfIndex or an hm2AgentSwitchIpVlanIfIndex. Note that for physical interfaces this only works if the corresponding hm2AgentSwitchIpInterfaceRoutingMode is set to enable.
                               hm2DnatIfmRowStatus 1.3.6.1.4.1.248.11.80.1.2.1.2.2.1.5 rowstatus read-only
The RowStatus value for this entry with the usual meanings: - active(1): The interface mapping is in place - notInService(2): The interface mapping is not in place because the user said so - notReady(3): The interface mapping is not in place because the agent said so - createAndGo(4): Create this mapping with the default priority and activate it. - createAndWait(5): Create this mapping deactivated. - destroy(6): Destroy this interface mapping.
               hm2DnatStats 1.3.6.1.4.1.248.11.80.1.2.2
                   hm2DnatGlobalStats 1.3.6.1.4.1.248.11.80.1.2.2.1
                       hm2DnatStatsTotalPck 1.3.6.1.4.1.248.11.80.1.2.2.1.1 counter64 read-only
Total number of packets processed by the DNAT firewall.
                       hm2DnatStatsTotalPckSize 1.3.6.1.4.1.248.11.80.1.2.2.1.2 counter64 read-only
Total number of bytes processed by the DNAT firewall.
                       hm2DnatStatsTotalPckDenDrop 1.3.6.1.4.1.248.11.80.1.2.2.1.3 counter64 read-only
Total number of packets dropped or denied by the DNAT firewall.
                       hm2DnatStatsTotalPckAccepted 1.3.6.1.4.1.248.11.80.1.2.2.1.4 counter64 read-only
Total number of packets accepted by the DNAT firewall.
                   hm2DnatRuleStats 1.3.6.1.4.1.248.11.80.1.2.2.2
                       hm2DnatStatsRuleTable 1.3.6.1.4.1.248.11.80.1.2.2.2.1 no-access
Table of per-rule statistics of the DNAT firewall.
                           hm2DnatStatsRuleTableEntry 1.3.6.1.4.1.248.11.80.1.2.2.2.1.1 no-access
Statistics table entry for DNAT.
                               hm2DnatStatsPckCount 1.3.6.1.4.1.248.11.80.1.2.2.2.1.1.1 counter64 read-only
Number of packets DNATed.
                               hm2DnatStatsPckSize 1.3.6.1.4.1.248.11.80.1.2.2.2.1.1.2 counter64 read-only
Number of bytes DNATed.
                               hm2DnatStatsLastApplied 1.3.6.1.4.1.248.11.80.1.2.2.2.1.1.3 hmtimeseconds1970 read-only
Time of last application of the rule in seconds since 1.1.1970.
           hm21to1 1.3.6.1.4.1.248.11.80.1.4
               hm21to1RuleObjects 1.3.6.1.4.1.248.11.80.1.4.1
                   hm21to1RuleCount 1.3.6.1.4.1.248.11.80.1.4.1.1 integer32 read-only
Number of current 1:1 NAT rules.
                   hm21to1IfMappingRuleCount 1.3.6.1.4.1.248.11.80.1.4.1.2 integer32 read-only
Number of current 1:1 NAT IF mapping entries.
                   hm21to1RulePendingActions 1.3.6.1.4.1.248.11.80.1.4.1.3 truthvalue read-only
This value describes, whether the 1:1 NAT rule table was modified but not yet written to the firewall implementation (set to true). After writing all modifications to the firewall, the value switches automatically back to false.
                   hm21to1CommitPendingActions 1.3.6.1.4.1.248.11.80.1.4.1.4 hmactionvalue read-write
Setting this value to action(2) writes not yet committed changes to the firewall (1:1 NAT and Interface Mapping Table). After writing all modifications, the value switches automatically back to noop(1).
                   hm21to1Alg 1.3.6.1.4.1.248.11.80.1.4.1.5 bits read-write
Global bitmask for application level gateway of all the 1:1 NAT rules. Bits: 'ftp': 0, 'icmp': 1.
                   hm21to1PublicIntf 1.3.6.1.4.1.248.11.80.1.4.1.6 interfaceindexorzero read-write
The index of the public interface defined on the uplink port.
               hm21to1RuleTables 1.3.6.1.4.1.248.11.80.1.4.2
                   hm21to1RuleTable 1.3.6.1.4.1.248.11.80.1.4.2.1 no-access
The list of 1:1 NAT rules for this firewall.
                       hm21to1RuleEntry 1.3.6.1.4.1.248.11.80.1.4.2.1.1 no-access
1:1 NAT rule entry.
                           hm21to1RuleIndex 1.3.6.1.4.1.248.11.80.1.4.2.1.1.1 integer32 no-access
Rule index of this 1:1 NAT rule.
                           hm21to1TargetAddress 1.3.6.1.4.1.248.11.80.1.4.2.1.1.2 displaystring read-only
Destination address of packets to be NATed. Can be: - Single address (a.b.c.d), - address range in CIDR notation (a.b.c.d/n) - the name of a Netobject ($NetobjectName) - 'any' for no filtering at all
                           hm21to1NewTargetAddress 1.3.6.1.4.1.248.11.80.1.4.2.1.1.3 displaystring read-only
New Destination address of packets to be NATed. Can be: - Single address (a.b.c.d), - address range in CIDR notation (a.b.c.d/n) - the name of a Netobject ($NetobjectName) - 'any' for no filtering at all
                           hm21to1RuleParams 1.3.6.1.4.1.248.11.80.1.4.2.1.1.4 displaystring read-only
Additional parameters to this rule as string. Currently only the value 'none' is valid. Reserved for future use.
                           hm21to1Log 1.3.6.1.4.1.248.11.80.1.4.2.1.1.5 truthvalue read-only
Set to true if application of this rule shall be logged.
                           hm21to1Trap 1.3.6.1.4.1.248.11.80.1.4.2.1.1.6 truthvalue read-only
Set to true if application of this rule shall send a trap.
                           hm21to1RowStatus 1.3.6.1.4.1.248.11.80.1.4.2.1.1.7 rowstatus read-only
This is a standard row status value: - active(1): The rule is active. Note that until committed, the rule will not be applied. - notInService(2): The rule is inactive because of user action. - notReady(3):The rule is inactive because it has an incomplete configuration. - createAndGo(4): Create the rule with default parameters activated. - createAndWait(5): Create the rule inactive. - destroy(6): Delete the rule. You cannot delete a rule with interface mappings to it.
                           hm21to1Description 1.3.6.1.4.1.248.11.80.1.4.2.1.1.8 displaystring read-only
User defined textual description related to this rule.
                           hm21to1IngressIntf 1.3.6.1.4.1.248.11.80.1.4.2.1.1.9 interfaceindexorzero read-only
The index of the interface on which packets going to the target address will arrive. This has to be either an hm2AgentSwitchIpInterfaceIfIndex or an hm2AgentSwitchIpVlanIfIndex. Note that for physical interfaces this only works if the corresponding hm2AgentSwitchIpInterfaceRoutingMode is set to enable.
                           hm21to1EgressIntf 1.3.6.1.4.1.248.11.80.1.4.2.1.1.10 interfaceindexorzero read-only
The index of the interface from which the new target address can be reached. This has to be either an hm2AgentSwitchIpInterfaceIfIndex or an hm2AgentSwitchIpVlanIfIndex. Note that for physical interfaces this only works if the corresponding hm2AgentSwitchIpInterfaceRoutingMode is set to enable.
                           hm21to1Priority 1.3.6.1.4.1.248.11.80.1.4.2.1.1.11 unsigned32 read-only
The priority is the sorting key for rules in the chain to this interface. They don't need to be unique per interface, but in that case, no clear order can be assumed. Priorities are processed in ascending order (0 highest priority).
                           hm21to1StorageType 1.3.6.1.4.1.248.11.80.1.4.2.1.1.12 storagetype read-only
The storage type for this row. Rows having the value 'volatile' are not saved.
               hm21to1Stats 1.3.6.1.4.1.248.11.80.1.4.3
                   hm21to1GeneralStats 1.3.6.1.4.1.248.11.80.1.4.3.1
                       hm21to1StatsTotalPck 1.3.6.1.4.1.248.11.80.1.4.3.1.1 counter64 read-only
Total number of packets processed by 1:1 NAT.
                       hm21to1StatsTotalPckSize 1.3.6.1.4.1.248.11.80.1.4.3.1.2 counter64 read-only
Total number of bytes processed by the 1:1 NAT.
                       hm21to1StatsTotalPckDenDrop 1.3.6.1.4.1.248.11.80.1.4.3.1.3 counter64 read-only
Total number of packets dropped or denied by 1:1 NAT.
                       hm21to1StatsTotalPckAccepted 1.3.6.1.4.1.248.11.80.1.4.3.1.4 counter64 read-only
Total number of packets accepted by 1:1 NAT.
                   hm21to1StatsTables 1.3.6.1.4.1.248.11.80.1.4.3.2
                       hm21to1StatsRuleTable 1.3.6.1.4.1.248.11.80.1.4.3.2.1 no-access
Table of per-rule statistics of 1:1 NAT.
                           hm21to1StatsRuleTableEntry 1.3.6.1.4.1.248.11.80.1.4.3.2.1.1 no-access
Statistics table entry for 1:1 NAT.
                               hm21to1StatsPckCount 1.3.6.1.4.1.248.11.80.1.4.3.2.1.1.1 counter64 read-only
Number of packets matched by this rule.
                               hm21to1StatsPckSize 1.3.6.1.4.1.248.11.80.1.4.3.2.1.1.2 counter64 read-only
Number of bytes processed by this rule.
                               hm21to1StatsLastApplied 1.3.6.1.4.1.248.11.80.1.4.3.2.1.1.3 hmtimeseconds1970 read-only
Time of last application of the rule in seconds since 1.1.1970.
           hm2Masquerading 1.3.6.1.4.1.248.11.80.1.5
               hm2MasqRuleObjects 1.3.6.1.4.1.248.11.80.1.5.1
                   hm2MasqRuleCount 1.3.6.1.4.1.248.11.80.1.5.1.1 integer32 read-only
Number of current masquerading rules.
                   hm2MasqIfMappingRuleCount 1.3.6.1.4.1.248.11.80.1.5.1.2 integer32 read-only
Number of current masquerading IF mapping entries.
                   hm2MasqRulePendingActions 1.3.6.1.4.1.248.11.80.1.5.1.3 truthvalue read-only
This value describes, whether the masquerading rule table was modified but not yet written to the firewall implementation (set to true). After writing all modifications to the firewall, the value switches automatically back to false.
                   hm2MasqCommitPendingActions 1.3.6.1.4.1.248.11.80.1.5.1.4 hmactionvalue read-write
Setting this value to action(2) writes not yet committed changes to the firewall (DNAT and Interface Mapping Table). After writing all modifications, the value switches automatically back to noop(1).
               hm2MasqRuleTables 1.3.6.1.4.1.248.11.80.1.5.2
                   hm2MasqRuleTable 1.3.6.1.4.1.248.11.80.1.5.2.1 no-access
The list of masquerading rules for this firewall.
                       hm2MasqRuleEntry 1.3.6.1.4.1.248.11.80.1.5.2.1.1 no-access
Masquerading rule entry.
                           hm2MasqRuleIndex 1.3.6.1.4.1.248.11.80.1.5.2.1.1.1 integer32 no-access
Rule index of this masquerading rule.
                           hm2MasqSourceAddress 1.3.6.1.4.1.248.11.80.1.5.2.1.1.2 displaystring read-only
The source address of the packets to reroute. Allowed formats are: - keyword 'any' - IP address ('10.0.0.1') - IP address range ('10.0.0.0/8') - a prepending '!' selects the complement set
                           hm2MasqSourcePort 1.3.6.1.4.1.248.11.80.1.5.2.1.1.3 displaystring read-only
The source port of the packet to reroute. Allowed formats are: - keyword 'any' - single ('10') - range with first and last separated by hyphen ('10-15') - comma separated list of s ('1235,25,123') - combination of the points above ('10,25-30,125,1993') The number of named ports (1 for each individual port, 2 for port ranges) must not exceed 15.
                           hm2MasqProto 1.3.6.1.4.1.248.11.80.1.5.2.1.1.4 integer read-only
The IP protocol (RFC 791) for protocol-independent filtering. The following values are currently supported: o tcp(4): transmission control protocol (RFC 793) o udp(5): user datagram protocol (RFC 768) o any(9): apply to all protocols Enumeration: 'udp': 5, 'any': 9, 'tcp': 4.
                           hm2MasqRuleParams 1.3.6.1.4.1.248.11.80.1.5.2.1.1.5 displaystring read-only
Additional parameters to this rule as string. Currently only the value 'none' is valid. Reserved for future use.
                           hm2MasqLog 1.3.6.1.4.1.248.11.80.1.5.2.1.1.6 truthvalue read-only
Set to true if application of this rule shall be logged.
                           hm2MasqTrap 1.3.6.1.4.1.248.11.80.1.5.2.1.1.7 truthvalue read-only
Set to true if application of this rule shall send a trap.
                           hm2MasqRowStatus 1.3.6.1.4.1.248.11.80.1.5.2.1.1.8 rowstatus read-only
This is a standard row status value: - active(1): The rule is active. Note that until committed, the rule will not be applied. - notInService(2): The rule is inactive because of user action. - notReady(3):The rule is inactive because it has an incomplete configuration. - createAndGo(4): Create the rule with default parameters activated. - createAndWait(5): Create the rule inactive. - destroy(6): Delete the rule. You cannot delete a rule with interface mappings to it.
                           hm2MasqDescription 1.3.6.1.4.1.248.11.80.1.5.2.1.1.9 displaystring read-only
User defined textual description related to this rule.
                           hm2MasqIpsecExempt 1.3.6.1.4.1.248.11.80.1.5.2.1.1.10 truthvalue read-only
Set to true if application of this rule should ignore IPsec traffic.
                   hm2MasqRuleIfMappingTable 1.3.6.1.4.1.248.11.80.1.5.2.2 no-access
Table for mapping masquerading rules to interfaces.
                       hm2MasqRuleIfMappingEntry 1.3.6.1.4.1.248.11.80.1.5.2.2.1 no-access
Entry in rule interface mapping table.
                           hm2MasqIfmRuleIndex 1.3.6.1.4.1.248.11.80.1.5.2.2.1.1 integer32 no-access
The index of the 1:1 NAT rule this mapping entry is assigned to.
                           hm2MasqIfmDirection 1.3.6.1.4.1.248.11.80.1.5.2.2.1.2 integer no-access
For masquerading, this can only be set to egress which is the interface packets will be masqueraded to. Enumeration: 'both': 3, 'ingress': 1, 'egress': 2.
                           hm2MasqIfmPriority 1.3.6.1.4.1.248.11.80.1.5.2.2.1.3 unsigned32 read-only
The priority is the sorting key for rules in the chain to this interface. They don't need to be unique per interface, but in that case, no clear order can be assumed. Priorities are processed in ascending order (0 highest priority).
                           hm2MasqIfmInterface 1.3.6.1.4.1.248.11.80.1.5.2.2.1.4 interfaceindex no-access
The interface this mapping entry is assigned to. This has to be either an hm2AgentSwitchIpInterfaceIfIndex or an hm2AgentSwitchIpVlanIfIndex. Note that for physical interfaces this only works if the corresponding hm2AgentSwitchIpInterfaceRoutingMode is set to enable.
                           hm2MasqIfmRowStatus 1.3.6.1.4.1.248.11.80.1.5.2.2.1.5 rowstatus read-only
The RowStatus value for this entry with the usual meanings: - active(1): The interface mapping is in place - notInService(2): The interface mapping is not in place because the user said so - notReady(3): The interface mapping is not in place because the agent said so - createAndGo(4): Create this mapping with the default priority and activate it. - createAndWait(5): Create this mapping deactivated. - destroy(6): Destroy this interface mapping.
               hm2MasqStats 1.3.6.1.4.1.248.11.80.1.5.3
                   hm2MasqGeneralStats 1.3.6.1.4.1.248.11.80.1.5.3.1
                       hm2MasqStatsTotalPck 1.3.6.1.4.1.248.11.80.1.5.3.1.1 counter64 read-only
Total number of packets processed by Masquerading
                       hm2MasqStatsTotalPckSize 1.3.6.1.4.1.248.11.80.1.5.3.1.2 counter64 read-only
Total number of bytes processed by Masquerading
                       hm2MasqStatsTotalPckDenDrop 1.3.6.1.4.1.248.11.80.1.5.3.1.3 counter64 read-only
Total number of packets dropped or denied by Masquerading
                       hm2MasqStatsTotalPckAccepted 1.3.6.1.4.1.248.11.80.1.5.3.1.4 counter64 read-only
Total number of packets accepted by masquerading.
                   hm2MasqStatsRuleTables 1.3.6.1.4.1.248.11.80.1.5.3.2
                       hm2MasqStatsRuleTable 1.3.6.1.4.1.248.11.80.1.5.3.2.1 no-access
Table of per-rule statistics of masquerading.
                           hm2MasqStatsRuleTableEntry 1.3.6.1.4.1.248.11.80.1.5.3.2.1.1 no-access
Statistics table entry for masquerading.
                               hm2MasqStatsPckCount 1.3.6.1.4.1.248.11.80.1.5.3.2.1.1.1 counter64 read-only
Number of packets matched by this rule.
                               hm2MasqStatsPckSize 1.3.6.1.4.1.248.11.80.1.5.3.2.1.1.2 counter64 read-only
Number of bytes processed by this rule.
                               hm2MasqStatsLastApplied 1.3.6.1.4.1.248.11.80.1.5.3.2.1.1.3 hmtimeseconds1970 read-only
Time of last application of the rule in seconds since 1.1.1970
           hm2DoubleNat 1.3.6.1.4.1.248.11.80.1.6
               hm2DoubleNatRuleObjects 1.3.6.1.4.1.248.11.80.1.6.1
                   hm2DoubleNatRuleCount 1.3.6.1.4.1.248.11.80.1.6.1.1 integer32 read-only
Current number of rules for double NAT.
                   hm2DoubleNatIfMappingRuleCount 1.3.6.1.4.1.248.11.80.1.6.1.2 integer32 read-only
Number of current double NAT IF mapping entries.
                   hm2DoubleNatRulePendingActions 1.3.6.1.4.1.248.11.80.1.6.1.3 truthvalue read-only
This value describes, whether the double NAT rule table was modified but not yet written to the firewall implementation (set to true). After writing all modifications to the firewall, the value switches automatically back to false.
                   hm2DoubleNatCommitPendingActions 1.3.6.1.4.1.248.11.80.1.6.1.4 hmactionvalue read-write
Setting this value to action(2) writes not yet committed changes to the firewall (double NAT and interface mapping table). After writing all modifications, the value switches automatically back to noop(1).
               hm2DoubleNatRuleTables 1.3.6.1.4.1.248.11.80.1.6.2
                   hm2DoubleNatRuleTable 1.3.6.1.4.1.248.11.80.1.6.2.1 no-access
Table of double NAT rules.
                       hm2DoubleNatRuleEntry 1.3.6.1.4.1.248.11.80.1.6.2.1.1 no-access
Entry within double NAT rule table.
                           hm2DonatRuleIndex 1.3.6.1.4.1.248.11.80.1.6.2.1.1.1 integer32 no-access
Index of the rule within table.
                           hm2DonatLocalInternalIp 1.3.6.1.4.1.248.11.80.1.6.2.1.1.2 displaystring read-only
The real IP address of the first net/machine you want to double NAT. Allowed formats are: - keyword 'any' - IP address ('10.0.0.1') - IP address range ('10.0.0.0/8')
                           hm2DonatLocalExternalIp 1.3.6.1.4.1.248.11.80.1.6.2.1.1.3 displaystring read-only
The IP address where you want the first net/machine to be reachable from the second net/machine. Allowed formats are: - keyword 'any' - IP address ('10.0.0.1') - IP address range ('10.0.0.0/8')
                           hm2DonatRemoteInternalIp 1.3.6.1.4.1.248.11.80.1.6.2.1.1.4 displaystring read-only
The real IP address of the second net/machine you want to double NAT. Allowed formats are: - keyword 'any' - IP address ('10.0.0.1') - IP address range ('10.0.0.0/8')
                           hm2DonatRemoteExternalIp 1.3.6.1.4.1.248.11.80.1.6.2.1.1.5 displaystring read-only
The IP address where you want the second net/machine to be reachable from the first net/machine. Allowed formats are: - keyword 'any' - IP address ('10.0.0.1') - IP address range ('10.0.0.0/8')
                           hm2DonatRuleParams 1.3.6.1.4.1.248.11.80.1.6.2.1.1.6 displaystring read-only
Additional parameters to this rule as string. Currently only the value 'none' is valid. Reserved for future use.
                           hm2DonatLog 1.3.6.1.4.1.248.11.80.1.6.2.1.1.7 truthvalue read-only
Set to true if application of this rule shall be logged.
                           hm2DonatTrap 1.3.6.1.4.1.248.11.80.1.6.2.1.1.8 truthvalue read-only
Set to true if application of this rule shall send a trap.
                           hm2DonatRowStatus 1.3.6.1.4.1.248.11.80.1.6.2.1.1.9 rowstatus read-only
This is a standard row status value: - active(1): The rule is active. Note that until committed, the rule will not be applied. - notInService(2): The rule is inactive because of user action. - notReady(3):The rule is inactive because it has an incomplete configuration. - createAndGo(4): Create the rule with default parameters activated. - createAndWait(5): Create the rule inactive. - destroy(6): Delete the rule. You cannot delete a rule with interface mappings to it.
                           hm2DonatDescription 1.3.6.1.4.1.248.11.80.1.6.2.1.1.10 displaystring read-only
User defined textual description related to this rule.
                   hm2DonatRuleIfMappingTable 1.3.6.1.4.1.248.11.80.1.6.2.2 no-access
Table for mapping double NAT rules to interfaces.
                       hm2DonatRuleIfMappingEntry 1.3.6.1.4.1.248.11.80.1.6.2.2.1 no-access
Entry in rule interface mapping table.
                           hm2DonatIfmRuleIndex 1.3.6.1.4.1.248.11.80.1.6.2.2.1.1 integer32 no-access
The index of the double NAT rule this mapping entry is assigned to.
                           hm2DonatIfmDirection 1.3.6.1.4.1.248.11.80.1.6.2.2.1.2 integer no-access
Meanings: - ingress(1): The first net/machine can be reached through this interface - egress(2): The second net/machine can be reached through this interface - both(3): Both machines/nets can be reached through this interface Enumeration: 'both': 3, 'ingress': 1, 'egress': 2.
                           hm2DonatIfmPriority 1.3.6.1.4.1.248.11.80.1.6.2.2.1.3 unsigned32 read-only
The priority is the sorting key for rules in the chain to this interface. They don't need to be unique per interface, but in that case, no clear order can be assumed. Priorities are processed in ascending order (0 highest priority).
                           hm2DonatIfmInterface 1.3.6.1.4.1.248.11.80.1.6.2.2.1.4 interfaceindex no-access
The interface this mapping entry is assigned to. This has to be either an hm2AgentSwitchIpInterfaceIfIndex or an hm2AgentSwitchIpVlanIfIndex. Note that for physical interfaces this only works if the corresponding hm2AgentSwitchIpInterfaceRoutingMode is set to enable.
                           hm2DonatIfmRowStatus 1.3.6.1.4.1.248.11.80.1.6.2.2.1.5 rowstatus read-only
The RowStatus value for this entry with the usual meanings: - active(1): The interface mapping is in place - notInService(2): The interface mapping is not in place because the user said so - notReady(3): The interface mapping is not in place because the agent said so - createAndGo(4): Create this mapping with the default priority and activate it. - createAndWait(5): Create this mapping deactivated. - destroy(6): Destroy this interface mapping.
               hm2DonatStats 1.3.6.1.4.1.248.11.80.1.6.3
                   hm2DonatGeneralStats 1.3.6.1.4.1.248.11.80.1.6.3.1
                       hm2DonatStatsTotalPck 1.3.6.1.4.1.248.11.80.1.6.3.1.1 counter64 read-only
Total number of packets processed by double NAT.
                       hm2DonatStatsTotalPckSize 1.3.6.1.4.1.248.11.80.1.6.3.1.2 counter64 read-only
Total number of bytes processed by double NAT.
                       hm2DonatStatsTotalPckDenDrop 1.3.6.1.4.1.248.11.80.1.6.3.1.3 counter64 read-only
Total number of packets dropped or denied by double NAT.
                       hm2DonatStatsTotalPckAcc 1.3.6.1.4.1.248.11.80.1.6.3.1.4 counter64 read-only
Total number of packets accepted by double NAT.
                   hm2DonatStatsRuleTables 1.3.6.1.4.1.248.11.80.1.6.3.2
                       hm2DonatStatsRuleTable 1.3.6.1.4.1.248.11.80.1.6.3.2.1 no-access
Table of per-rule statistics of double NAT.
                           hm2DonatStatsRuleTableEntry 1.3.6.1.4.1.248.11.80.1.6.3.2.1.1 no-access
Statistics table entry for double NAT.
                               hm2DonatStatsPckCount 1.3.6.1.4.1.248.11.80.1.6.3.2.1.1.1 counter64 read-only
Number of packets matched by this rule.
                               hm2DonatStatsPckSize 1.3.6.1.4.1.248.11.80.1.6.3.2.1.1.2 counter64 read-only
Number of bytes processed by this rule.
                               hm2DonatStatsLastApplied 1.3.6.1.4.1.248.11.80.1.6.3.2.1.1.3 hmtimeseconds1970 read-only
Time of last application of the rule in seconds since 1.1.1970.
       hm2NatConformance 1.3.6.1.4.1.248.11.80.2
           hm2NatCompliances 1.3.6.1.4.1.248.11.80.2.1
               hm2NatCompliance 1.3.6.1.4.1.248.11.80.2.1.1
The compliance statement for an SNMP entity which implements the Hirschmann NAT MIB.
           hm2NatGroups 1.3.6.1.4.1.248.11.80.2.2
               hm2NatGeneralGroup 1.3.6.1.4.1.248.11.80.2.2.1
A collection of all Hirschmann objects provided by the Firewall module.
               hm2NatNotificationsGroup 1.3.6.1.4.1.248.11.80.2.2.2
A collection of all Hirschmann notifications provided by the NAT module.