HIRSCHMANN-GENERIC-ERROR-MIB: View SNMP OID List / Download MIB

VENDOR: RICHARD HIRSCHMANN


 Home MIB: HIRSCHMANN-GENERIC-ERROR-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hirschmann 1.3.6.1.4.1.248
               hmMgmtSEEErrorIDGroup 1.3.6.1.4.1.248.16.2
                   hmRedundancyConflict 1.3.6.1.4.1.248.16.2.1
Conflict Redundancy Protocols: Cannot enable {0} because of enabled {1}.
                   hmRedundancyConflictPort 1.3.6.1.4.1.248.16.2.2
Conflict Redundancy Protocols: Cannot enable {0} because of enabled {1} on Ring Port {2}.
                   hmMaxNumExceeded 1.3.6.1.4.1.248.16.2.3
Max. number exceeded for {0}.
                   hmAlreadyCreated 1.3.6.1.4.1.248.16.2.4
Instance already created.
                   hmRedundancyConflictFpgaPort 1.3.6.1.4.1.248.16.2.5
Conflict Redundancy Protocols: Cannot enable {0} on configured ports.
                   hmVlanUnawareConflict 1.3.6.1.4.1.248.16.2.6
Cannot enable {0} because {1} is enabled.
                   hmRedundancyConflictPortShort 1.3.6.1.4.1.248.16.2.7
Cannot enable {0} on configured ports. Reason: {1}
                   hmTableFullError 1.3.6.1.4.1.248.16.2.8
{0} table is full. Maximum allowed: {1}.
                   hmFunctionNotUsableWithInterface 1.3.6.1.4.1.248.16.2.9
This function cannot be used with this interface.
                   hmGeneralConflict 1.3.6.1.4.1.248.16.2.10
{0} conflicts with {1}. {2}.
                   hmGeneralExceededRange 1.3.6.1.4.1.248.16.2.11
The {0} is exceeding the range. Maximum permissable range is {1}..{2}.
                   hmRmonAlarmTableFullErrorReturn 1.3.6.1.4.1.248.16.2.100
Alarm table full. Only {0} entries are allowed.
                   hmMgmtUdpPortInUse 1.3.6.1.4.1.248.16.2.200
Given UDP port is already in use.
                   hmMgmtTcpPortInUse 1.3.6.1.4.1.248.16.2.201
Given TCP port is already in use.
                   hmMgmtIPAddressConflictWithMgmtIP 1.3.6.1.4.1.248.16.2.202
Given IP address/netmask {0}/{1} conflicts with the management IP address/netmask.
                   hmMgmtIPAddressConflictWithOobIP 1.3.6.1.4.1.248.16.2.203
Given IP address/netmask {0}/{1} conflicts with the out-of-band management IP address/netmask.
                   hmMgmtIPAddressConflictWithRouterIP 1.3.6.1.4.1.248.16.2.204
Given IP address/netmask {0}/{1} conflicts with a routing interface IP address/netmask.
                   hm2NetIPAddrInvalid 1.3.6.1.4.1.248.16.2.300
The {0} IP address is not valid.
                   hm2NetIPAddrAndGateway 1.3.6.1.4.1.248.16.2.301
Management IP address and gateway are not on the same subnet.
                   hm2NetIPAddrAndSubnet 1.3.6.1.4.1.248.16.2.302
The {0} IP address and subnet mask combination is not valid.
                   hm2NetPrefixLengthInvalid 1.3.6.1.4.1.248.16.2.303
Subnet mask must have contiguous ones and be no longer than 30 bits.
               hmMgmtSEInfoIDGroup 1.3.6.1.4.1.248.16.3
                   hmMgmtSEInfoValueChanged 1.3.6.1.4.1.248.16.3.1
Note: Value changed from {0} to {1}