HH3C-DOT11-SA-MIB: View SNMP OID List / Download MIB

VENDOR: H3C


 Home MIB: HH3C-DOT11-SA-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hh3cDot11Sa 1.3.6.1.4.1.25506.2.75.13
This MIB module provides spectrum analysis information. The initial revision of this MIB module. The spectrum analysis module on APs is able to examine the radio frequency (RF) environment in which the Wi-Fi network is operating, identify interference and classify its sources. An analysis of the results can then be used to quickly isolate issues with packet transmission, channel quality, and traffic congestion caused by contention with other devices operating in the same band or channel.
       hh3cDot11SaCfgGroup 1.3.6.1.4.1.25506.2.75.13.1
           hh3cDot11SaCfgTable 1.3.6.1.4.1.25506.2.75.13.1.1 no-access
This table is used to configure spectrum analysis.
               hh3cDot11SaCfgEntry 1.3.6.1.4.1.25506.2.75.13.1.1.1 no-access
This entry contains the spectrum analysis configuration.
                   hh3cDot11SaCfgRadioType 1.3.6.1.4.1.25506.2.75.13.1.1.1.1 integer no-access
Represents the radio type of the configuration. Enumeration: 'dot11bg': 1, 'dot11a': 2.
                   hh3cDot11SaEnable 1.3.6.1.4.1.25506.2.75.13.1.1.1.2 truthvalue read-write
Represents whether spectrum analysis is enabled globally.
                   hh3cDot11SaRptDevType 1.3.6.1.4.1.25506.2.75.13.1.1.1.3 bits read-write
Represents which types of interference devices should be reported. Bits: 'freqHopperOthers': 7, 'fixedFreqOthers': 3, 'freqHopperXbox': 10, 'genericInterferer': 11, 'fixedFreqAudio': 6, 'microwave': 0, 'bluetooth': 2, 'fixedFreqVideo': 5, 'freqHopperCordlessNetwork': 9, 'freqHopperCordlessBase': 8, 'microwaveInverter': 1, 'fixedFreqCordlessPhone': 4.
                   hh3cDot11SaTrapDevEnable 1.3.6.1.4.1.25506.2.75.13.1.1.1.4 truthvalue read-write
Represents whether the interference device trap is enabled.
                   hh3cDot11SaTrapDevType 1.3.6.1.4.1.25506.2.75.13.1.1.1.5 bits read-write
Represents which types of interference device will send traps when the interference device trap is enabled. Bits: 'freqHopperOthers': 7, 'fixedFreqOthers': 3, 'freqHopperXbox': 10, 'genericInterferer': 11, 'fixedFreqAudio': 6, 'microwave': 0, 'bluetooth': 2, 'fixedFreqVideo': 5, 'freqHopperCordlessNetwork': 9, 'freqHopperCordlessBase': 8, 'microwaveInverter': 1, 'fixedFreqCordlessPhone': 4.
                   hh3cDot11SaTrapAQEnable 1.3.6.1.4.1.25506.2.75.13.1.1.1.6 truthvalue read-write
Represents whether the air quality trap is enabled.
                   hh3cDot11SaTrapAQThreshold 1.3.6.1.4.1.25506.2.75.13.1.1.1.7 integer32 read-write
Represents the air quality trap threshold. When the air quality is below this value, the air quality trap will be sent.
                   hh3cDot11SaDrivenRRMEnable 1.3.6.1.4.1.25506.2.75.13.1.1.1.8 truthvalue read-write
Configure whether to trigger RRM to run when an access point detects a certain level of interference.
                   hh3cDot11SaDrivenRRMSnt 1.3.6.1.4.1.25506.2.75.13.1.1.1.9 integer read-write
Configure the threshold at which RRM will be triggered. When the interference level for the access point rises above the threshold level, RRM initiates a local dynamic channel assignment (DCA) run and changes the channel of the affected access point radio if possible to improve network performance. Low represents a decreased sensitivity to changes in the environment while high represents an increased sensitivity. Enumeration: 'high': 3, 'medium': 2, 'low': 1.
       hh3cDot11SaStatusGroup 1.3.6.1.4.1.25506.2.75.13.2
           hh3cDot11SaRtFFTDataTable 1.3.6.1.4.1.25506.2.75.13.2.1 no-access
This table contains the real-time FFT data for spectrum analysis.
               hh3cDot11SaRtFFTDataEntry 1.3.6.1.4.1.25506.2.75.13.2.1.1 no-access
This entry contains the real-time FFT data for spectrum analysis.
                   hh3cDot11SaAPID 1.3.6.1.4.1.25506.2.75.13.2.1.1.1 hh3cdot11objectidtype no-access
Represents the serial ID of the AP.
                   hh3cDot11SaRadioID 1.3.6.1.4.1.25506.2.75.13.2.1.1.2 hh3cdot11radioscopetype no-access
Represents the ID of the radio.
                   hh3cDot11SaRtDataGroupID 1.3.6.1.4.1.25506.2.75.13.2.1.1.3 integer32 no-access
Represents group ID of the collected data. Maybe the device collects multiple groups of data at the collected interval.
                   hh3cDot11SaFrequency 1.3.6.1.4.1.25506.2.75.13.2.1.1.4 integer32 no-access
Represents the frequency number in 100 Hz.
                   hh3cDot11SaRtFreqPower 1.3.6.1.4.1.25506.2.75.13.2.1.1.5 integer32 read-only
Represents the power of the frequency point.
                   hh3cDot11SaRtFreqMaxPower 1.3.6.1.4.1.25506.2.75.13.2.1.1.6 integer32 read-only
Represents the max power of the frequency point.
                   hh3cDot11SaRtFreqDutyCycle 1.3.6.1.4.1.25506.2.75.13.2.1.1.7 integer32 read-only
Represents the duty cycle of the frequency point.
                   hh3cDot11SaRtFreqDataSeqNo 1.3.6.1.4.1.25506.2.75.13.2.1.1.8 unsigned32 read-only
Represents the sequence number of the data.
           hh3cDot11SaIntfDevTable 1.3.6.1.4.1.25506.2.75.13.2.2 no-access
This table contains the information of the interfering devices.
               hh3cDot11SaIntfDevEntry 1.3.6.1.4.1.25506.2.75.13.2.2.1 no-access
This entry contains the information of the interfering devices.
                   hh3cDot11SaDevID 1.3.6.1.4.1.25506.2.75.13.2.2.1.1 integer32 no-access
Represents the device identification number that uniquely identified the interfering device.
                   hh3cDot11SaDevType 1.3.6.1.4.1.25506.2.75.13.2.2.1.2 hh3cdot11saintfdevtype read-only
Represents type of the interferer.
                   hh3cDot11SaDevSI 1.3.6.1.4.1.25506.2.75.13.2.2.1.3 integer32 read-only
Represents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe).
                   hh3cDot11SaDevRSSI 1.3.6.1.4.1.25506.2.75.13.2.2.1.4 integer32 read-only
Represents receive signal strength indicator (RSSI) of interfering device.
                   hh3cDot11SaDevDutyCycle 1.3.6.1.4.1.25506.2.75.13.2.2.1.5 integer32 read-only
Represents proportion of time in percentage during which the interfering device was active.
                   hh3cDot11SaDevAffectedChls 1.3.6.1.4.1.25506.2.75.13.2.2.1.6 octet string read-only
Represents channels that the interfering device affects.
                   hh3cDot11SaDevDetectedTime 1.3.6.1.4.1.25506.2.75.13.2.2.1.7 dateandtime read-only
Represents time at which the interference was detected.
           hh3cDot11SaAirQualityTable 1.3.6.1.4.1.25506.2.75.13.2.3 no-access
This table contains the air quality of the channels.
               hh3cDot11SaAirQualityEntry 1.3.6.1.4.1.25506.2.75.13.2.3.1 no-access
This entry contains the air quality of the channels.
                   hh3cDot11SaChlNum 1.3.6.1.4.1.25506.2.75.13.2.3.1.1 hh3cdot11channelscopetype no-access
Represents the radio channel where the air quality is monitored.
                   hh3cDot11SaAvgQuality 1.3.6.1.4.1.25506.2.75.13.2.3.1.2 integer32 read-only
Represents the average air quality for this radio channel.
                   hh3cDot11SaMinQuality 1.3.6.1.4.1.25506.2.75.13.2.3.1.3 integer32 read-only
Represents the minimum air quality for this radio channel.
                   hh3cDot11SaIntfDevNum 1.3.6.1.4.1.25506.2.75.13.2.3.1.4 integer32 read-only
Represents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band.
                   hh3cDot11SaWiFiUtil 1.3.6.1.4.1.25506.2.75.13.2.3.1.5 integer32 read-only
Represents the percentage of the channel currently being used by Wi-Fi devices.
                   hh3cDot11SaNonWiFiUtil 1.3.6.1.4.1.25506.2.75.13.2.3.1.6 integer32 read-only
Represents the percentage of the channel currently being used by non-Wi-Fi interference.
                   hh3cDot11SaNoiseFloor 1.3.6.1.4.1.25506.2.75.13.2.3.1.7 integer32 read-only
Represents current noise floor recorded on the channel.
       hh3cDot11SaNotifyGroup 1.3.6.1.4.1.25506.2.75.13.3
           hh3cDot11SaTraps 1.3.6.1.4.1.25506.2.75.13.3.0
               hh3cDot11SaIntfDevDetected 1.3.6.1.4.1.25506.2.75.13.3.0.1
Interfering device is detected.
               hh3cDot11SaIntfDevDisappear 1.3.6.1.4.1.25506.2.75.13.3.0.2
Interfering device disappeared.
               hh3cDot11SaChlQltLow 1.3.6.1.4.1.25506.2.75.13.3.0.3
The quality of the channel is below the specified threshold.
               hh3cDot11SaChlQltRecover 1.3.6.1.4.1.25506.2.75.13.3.0.4
The quality of the channel recovered from low status.
           hh3cDot11SaTrapVars 1.3.6.1.4.1.25506.2.75.13.3.1
               hh3cDot11SaTrapAPID 1.3.6.1.4.1.25506.2.75.13.3.1.1 hh3cdot11objectidtype no-access
Represents the identifier of the AP.
               hh3cDot11SaTrapRadioID 1.3.6.1.4.1.25506.2.75.13.3.1.2 hh3cdot11radioscopetype no-access
Represents the identifier of the radio.
               hh3cDot11SaTrapDevID 1.3.6.1.4.1.25506.2.75.13.3.1.3 integer32 no-access
Represents the device identification number that uniquely identified the interfering device.
               hh3cDot11SaTrapIntfDevType 1.3.6.1.4.1.25506.2.75.13.3.1.4 hh3cdot11saintfdevtype no-access
Represents type of the interferer.
               hh3cDot11APTrapDevSI 1.3.6.1.4.1.25506.2.75.13.3.1.5 integer32 no-access
Represents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe).
               hh3cDot11SaTrapDevRSSI 1.3.6.1.4.1.25506.2.75.13.3.1.6 integer32 no-access
Represents receive signal strength indicator (RSSI) of interfering device.
               hh3cDot11APTrapDevDC 1.3.6.1.4.1.25506.2.75.13.3.1.7 integer32 no-access
Represents proportion of time in percentage during which the interfering device was active.
               hh3cDot11APTrapDevChls 1.3.6.1.4.1.25506.2.75.13.3.1.8 octet string no-access
Represents channels that the interfering device affects.
               hh3cDot11APTrapDevDctTime 1.3.6.1.4.1.25506.2.75.13.3.1.9 dateandtime no-access
Represents time at which the interference was detected.
               hh3cDot11SaTrapChlNum 1.3.6.1.4.1.25506.2.75.13.3.1.10 hh3cdot11channelscopetype no-access
Represents the radio channel where the air quality is monitored.
               hh3cDot11SaTrapChlQlt 1.3.6.1.4.1.25506.2.75.13.3.1.11 integer32 no-access
Represents the quality for this radio channel.
               hh3cDot11SaTrapChlIntfNum 1.3.6.1.4.1.25506.2.75.13.3.1.12 integer32 no-access
Represents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band.