HH3C-DOT11-ACMT-MIB: View SNMP OID List / Download MIB

VENDOR: H3C


 Home MIB: HH3C-DOT11-ACMT-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hh3cDot11ACMT 1.3.6.1.4.1.25506.2.75.1
This MIB defines information as per wireless AC and tunnel between AP and AC. If NMS intends to get more detailed information for the AP and AC, it could refer entPhysicalIndex in the Entity MIB to get entity information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.
     hh3cDot11ACObjectGroup 1.3.6.1.4.1.25506.2.75.1.1
         hh3cDot11ACObject 1.3.6.1.4.1.25506.2.75.1.1.1
             hh3cDot11CurrentACMACMode 1.3.6.1.4.1.25506.2.75.1.1.1.1 hh3cdot11macmodetype read-only
Represents which MAC mode defined in the CAPWAP draft is in use for the AC.
             hh3cDot11MaxAPNumPermitted 1.3.6.1.4.1.25506.2.75.1.1.1.2 integer32 read-only
Represents the maximum number of AP connection permitted for one AC.
             hh3cDot11MaxStationNumPermitted 1.3.6.1.4.1.25506.2.75.1.1.1.3 integer32 read-only
Represents the maximum number of station connection permitted for one AC.
         hh3cDot11ACLoadInfo 1.3.6.1.4.1.25506.2.75.1.1.2
             hh3cDot11APConnectCount 1.3.6.1.4.1.25506.2.75.1.1.2.1 integer32 read-only
Represents the total number of APs which are connecting to AC.
             hh3cDot11StationConnectCount 1.3.6.1.4.1.25506.2.75.1.1.2.2 integer32 read-only
Represents the total number of stations which are accessing the WLAN service through AC.
             hh3cDot11ACIFLoadInfoTable 1.3.6.1.4.1.25506.2.75.1.1.2.3 no-access
Represents AP number information of interface.
                 hh3cDot11ACIFLoadInfoEntry 1.3.6.1.4.1.25506.2.75.1.1.2.3.1 no-access
Each entry represents AP number information of an interface
                     hh3cDot11ACIfIndex 1.3.6.1.4.1.25506.2.75.1.1.2.3.1.1 integer32 no-access
Represents index of AC interface.
                     hh3cDot11ACIfApNum 1.3.6.1.4.1.25506.2.75.1.1.2.3.1.2 integer32 read-only
Represents AP number connected to the AC interface.
                     hh3cDot11ACIfStaNum 1.3.6.1.4.1.25506.2.75.1.1.2.3.1.3 integer32 read-only
Represents Station number connected to the AC interface.
                     hh3cDot11ACIfName 1.3.6.1.4.1.25506.2.75.1.1.2.3.1.4 octet string read-only
Represents InterfaceName AP number connected to AC interface.
             hh3cDot11MasterAPCount 1.3.6.1.4.1.25506.2.75.1.1.2.4 integer32 read-only
Represents the total number of AP which have established the master tunnel with AC.
             hh3cDot11SlaveAPCount 1.3.6.1.4.1.25506.2.75.1.1.2.5 integer32 read-only
Represents the total number of AP which have established the slave tunnel with AC.
             hh3cDot11ConnectAutoAPCount 1.3.6.1.4.1.25506.2.75.1.1.2.6 integer32 read-only
Represents the total number of auto AP which are connecting to AC.
             hh3cDot11PersistentAPCount 1.3.6.1.4.1.25506.2.75.1.1.2.7 integer32 read-only
Represents the total number of persistent AP.
             hh3cDot11AcUploadFrameCnt 1.3.6.1.4.1.25506.2.75.1.1.2.8 counter64 read-only
Represents the number of frames that AP sends to AC through LWAPP tunnel.
             hh3cDot11AcDownloadFrameCnt 1.3.6.1.4.1.25506.2.75.1.1.2.9 counter64 read-only
Represents the number of frames that AC sends to AP through LWAPP tunnel.
             hh3cDot11AcUploadFrameBytes 1.3.6.1.4.1.25506.2.75.1.1.2.10 counter64 read-only
Represents the bytes of frames that AP sends to AC through LWAPP tunnel.
             hh3cDot11AcDownloadFrameBytes 1.3.6.1.4.1.25506.2.75.1.1.2.11 counter64 read-only
Represents the bytes of frames that AC sends to AP through LWAPP tunnel.
         hh3cDot11WLANAssocStatisInfo 1.3.6.1.4.1.25506.2.75.1.1.3
             hh3cDot11StationAssocSum 1.3.6.1.4.1.25506.2.75.1.1.3.1 counter32 read-only
Represents the total number of station association.
             hh3cDot11StationAssocFailSum 1.3.6.1.4.1.25506.2.75.1.1.3.2 counter32 read-only
Represents the total number of station association failure.
             hh3cDot11StationReassocSum 1.3.6.1.4.1.25506.2.75.1.1.3.3 counter32 read-only
Represents the total number of station reassociation.
             hh3cDot11StationAssocRejectedSum 1.3.6.1.4.1.25506.2.75.1.1.3.4 counter32 read-only
Represents the total number of station association rejected on account of resource limit.
             hh3cDot11StationExDeAuthenSum 1.3.6.1.4.1.25506.2.75.1.1.3.5 counter32 read-only
Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP).
             hh3cDot11StationCurAssocSum 1.3.6.1.4.1.25506.2.75.1.1.3.6 integer32 read-only
Represents the total number of current associated stations.
         hh3cDot11ACBASInfo 1.3.6.1.4.1.25506.2.75.1.1.4
             hh3cDot11ACBASSysObjects 1.3.6.1.4.1.25506.2.75.1.1.4.1
             hh3cDot11ACBASTableObjects 1.3.6.1.4.1.25506.2.75.1.1.4.2
                 hh3cDot11ACBASIfTable 1.3.6.1.4.1.25506.2.75.1.1.4.2.3 no-access
Represents the BAS information of interfaces.
                     hh3cDot11ACBASIfEntry 1.3.6.1.4.1.25506.2.75.1.1.4.2.3.1 no-access
Each entry represents the BAS information of an interface
                         hh3cDot11ACBASIfIndex 1.3.6.1.4.1.25506.2.75.1.1.4.2.3.1.1 integer32 no-access
The ifIndex of the BAS interface.
                         hh3cDot11ACBASIfDescr 1.3.6.1.4.1.25506.2.75.1.1.4.2.3.1.2 octet string read-only
A textual string containing information about the BAS interface.
                         hh3cDot11ACBASIfType 1.3.6.1.4.1.25506.2.75.1.1.4.2.3.1.3 ianaiftype read-only
The type of the BAS interface.
         hh3cDot11ACStaUserSecAuthStatis 1.3.6.1.4.1.25506.2.75.1.1.5
             hh3cDot11ACStaUserAuthCurNumber 1.3.6.1.4.1.25506.2.75.1.1.5.1 integer32 read-only
Represents the current number of user authenticated with this AC.
             hh3cDot11ACStaUserConnFailCnt 1.3.6.1.4.1.25506.2.75.1.1.5.2 counter32 read-only
Represents the total number of user disconnected with this AC.
             hh3cDot11ACStaUserAuthReqCnt 1.3.6.1.4.1.25506.2.75.1.1.5.3 counter32 read-only
Represents the total number of user authenticate request with this AC.
             hh3cDot11ACStaUserAuthSuccCnt 1.3.6.1.4.1.25506.2.75.1.1.5.4 counter32 read-only
Represents the total number of user authenticated successed with this AC.
             hh3cDot11ACStaUserAuthFailCnt 1.3.6.1.4.1.25506.2.75.1.1.5.5 counter32 read-only
Represents the total number of user authenticated failed with this AC.
     hh3cDot11CAPWAPTunnelGroup 1.3.6.1.4.1.25506.2.75.1.2
         hh3cDot11CAPWAPTunnelTable 1.3.6.1.4.1.25506.2.75.1.2.1 no-access
The table will list all the APs which are connecting to the AC by the CAPWAP tunnel protocol.
             hh3cDot11CAPWAPTunnelEntry 1.3.6.1.4.1.25506.2.75.1.2.1.1 no-access
Each entry contains information of data tunnel and control tunnel of AP which is connecting to AC.
                 hh3cDot11CurrTunnelAPID 1.3.6.1.4.1.25506.2.75.1.2.1.1.1 hh3cdot11objectidtype no-access
To uniquely identify the CAPWAP tunnel set up between the AP identified by APID and a specific AC.
                 hh3cDot11CtrlTunnelCurrSec 1.3.6.1.4.1.25506.2.75.1.2.1.1.2 hh3cdot11tunnelsecschemtype read-only
Represents what security scheme is in use for control tunnel.
                 hh3cDot11CtrlTunnelUpTime 1.3.6.1.4.1.25506.2.75.1.2.1.1.3 integer32 read-only
Represents how long for control tunnel up. If the value is zero, then tunnel is not set up.
                 hh3cDot11DataTunnelCurrSec 1.3.6.1.4.1.25506.2.75.1.2.1.1.4 hh3cdot11tunnelsecschemtype read-only
Represents what security scheme is in use for data tunnel.
                 hh3cDot11DataTunnelUpTime 1.3.6.1.4.1.25506.2.75.1.2.1.1.5 integer32 read-only
Represents how long for data tunnel up. If the value is zero, then tunnel is not set up.
                 hh3cDot11CtrlTunnelUpTimeTicks 1.3.6.1.4.1.25506.2.75.1.2.1.1.6 timeticks read-only
Represents how long control tunnel is up. If the value is zero, then tunnel is not set up.
     hh3cDot11ACMtNotifyGroup 1.3.6.1.4.1.25506.2.75.1.3
         hh3cDot11ACMtTraps 1.3.6.1.4.1.25506.2.75.1.3.0
             hh3cDot11ACMtTunnelSetupTrap 1.3.6.1.4.1.25506.2.75.1.3.0.1
This notification is sent by AC when CAPWAP tunnel becomes up. By this way, NMS will immediately know tunnel up event. It is unnecessary to identify whether it is control or data tunnel.
             hh3cDot11ACMtTunnelDownTrap 1.3.6.1.4.1.25506.2.75.1.3.0.2
This notification is sent by AC when CAPWAP tunnel becomes down. By this way, NMS will immediately know tunnel down event. It is unnecessary to identify whether it is control or data tunnel.
             hh3cDot11ACMtBackupSwtTrap 1.3.6.1.4.1.25506.2.75.1.3.0.3
This trap is sent by AC when AC switches from master to slave or from slave to master.
             hh3cDot11ACLoadBalanceTrap 1.3.6.1.4.1.25506.2.75.1.3.0.4
This trap is sent by AC when load-balance is enabled on AC.
             hh3cDot11ACStaFullTrap 1.3.6.1.4.1.25506.2.75.1.3.0.5
This notification will be sent when STA is full on AC.
         hh3cDot11ACMtTrapVarObjects 1.3.6.1.4.1.25506.2.75.1.3.1
             hh3cDot11ACMtTrapTunlDwnInfo 1.3.6.1.4.1.25506.2.75.1.3.1.1 integer no-access
Represents the reason for tunnel down. The following values are supported: tunnelTimeout(1), - When AC detects the tunnel is broken, - it will notify NMS. keyUpdateFailure(2), - rekey process is failed, tunnel will - be broken. apReset(3), - Administrator reset AP. apCrash(4), - AP reboot for system crash. apDeleted(5) - Delete AP from AC and trigger - tunnel down. apCfgChange(6) - The configuration for AP was changed. Enumeration: 'apDeleted': 5, 'apCrash': 4, 'keyUpdateFailure': 2, 'tunnelTimeout': 1, 'apReset': 3, 'apCfgChange': 6.
             hh3cDot11ACMtTrapTunlUpInfo 1.3.6.1.4.1.25506.2.75.1.3.1.2 integer no-access
Represents the reason for tunnel up. The following values are supported: up(1) - The AP joined AC. Enumeration: 'up': 1.
             hh3cDot11ACMtTrapBackupSwitchInfo 1.3.6.1.4.1.25506.2.75.1.3.1.3 integer no-access
Represents status which the AC switches to. The following values are supported: masterToSlave - The AC switches from master to slave. slaveToMaster - The AC switches from slave to master. Enumeration: 'slaveToMaster': 2, 'masterToSlave': 1.
             hh3cDot11ACMtTrapTnlAPName 1.3.6.1.4.1.25506.2.75.1.3.1.4 octet string no-access
Represents name of the AP which sets up the tunnel with the AC.
             hh3cDot11ACMtTrapTnlAPIPAddr 1.3.6.1.4.1.25506.2.75.1.3.1.5 ipaddress no-access
Represents IP address of the AP which sets up the tunnel with the AC.
             hh3cDot11LoadBalanceType 1.3.6.1.4.1.25506.2.75.1.3.1.6 integer no-access
Represents which kind load balance is enabled by AC. The following values are supported: traffic mode load-balancing: traffic snapshot is considered. session mode load-balancing: the number of users associated with the AP/radio is considered. Enumeration: 'session': 2, 'traffic': 1.
             hh3cDot11LoadBalanceThreshold 1.3.6.1.4.1.25506.2.75.1.3.1.7 integer32 no-access
Represents the value of load balance threshold.
             hh3cDot11ACMtTrapAPIPv6Addr 1.3.6.1.4.1.25506.2.75.1.3.1.8 octet string no-access
Represents IPv6 address of the AP which sets up the tunnel with the AC.
             hh3cDot11ACMtTrapTunlDwnCount 1.3.6.1.4.1.25506.2.75.1.3.1.9 integer32 no-access
Reprsents how many times that the tunnel between AC and AP has down.
             hh3cDot11ACMaxStaNum 1.3.6.1.4.1.25506.2.75.1.3.1.10 integer32 no-access
Represents the max number of STA on AC.