H3C-EPON-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: H3C-EPON-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 h3cEponMibObjects 1.3.6.1.4.1.2011.10.2.42.1
The objects in this MIB module are used to manage and display current configuration of Ethernet Passive Optical Network (EPON) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65..
     h3cEponSysMan 1.3.6.1.4.1.2011.10.2.42.1.1
         h3cEponAutoAuthorize 1.3.6.1.4.1.2011.10.2.42.1.1.1 truthvalue read-write
This value determines whether software performs self-authorization for each Optical Network Unit(ONU) registering to the network. Setting it to false means for every ONU registering, software requires external authorization, and until it's done the ONU is not authenticated. True value means software authorizes each ONU registering to the network automatically. true - ONUs are always authorized. false - If 802.1x authorization is enable, the ONUs have to be authorized by the protocol. - If 802.1x authorization is disable, ONUs are always authorized.
         h3cEponMonitorCycle 1.3.6.1.4.1.2011.10.2.42.1.1.2 integer32 read-write
The cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch alarm and so on. The unit is second.
         h3cEponMsgTimeOut 1.3.6.1.4.1.2011.10.2.42.1.1.3 integer32 read-write
Timeout waiting for a response from Optical Line Terminal(OLT) firmware after sending it a message. The unit is millisecond.
         h3cEponMsgLoseNum 1.3.6.1.4.1.2011.10.2.42.1.1.4 integer32 read-write
The times of messages sending timeouts, after which OLT will reset (applying to every OLT).
         h3cEponSysHasEPONBoard 1.3.6.1.4.1.2011.10.2.42.1.1.5 truthvalue read-only
true(1) - At least an EPON board exists. false(2) - No EPON board exists.
         h3cEponMonitorCycleEnable 1.3.6.1.4.1.2011.10.2.42.1.1.6 truthvalue read-write
Stop or continue monitoring. true(1) - Continue monitoring. false(2) - Stop monitoring.
         h3cEponOltSoftwareErrAlmEnable 1.3.6.1.4.1.2011.10.2.42.1.1.7 truthvalue read-write
Software error alarm behavior of all active OLTs. true(1) - alarm enable. false(2) - alarm disable.
         h3cEponPortLoopBackAlmEnable 1.3.6.1.4.1.2011.10.2.42.1.1.8 truthvalue read-write
LoopBack alarm behavior of EPON ports. true(1) - alarm enable. false(2) - alarm disable.
         h3cEponMonitorCycleMinVal 1.3.6.1.4.1.2011.10.2.42.1.1.9 integer32 read-only
The lower limit of cycle which be confined to the h3cEponMonitorCycle.
         h3cEponMonitorCycleMaxVal 1.3.6.1.4.1.2011.10.2.42.1.1.10 integer32 read-only
The upper limit of cycle which be confined to the h3cEponMonitorCycle.
         h3cEponMsgTimeOutMinVal 1.3.6.1.4.1.2011.10.2.42.1.1.11 integer32 read-only
The lower limit of timeout which be confined to the h3cEponMsgTimeOut.
         h3cEponMsgTimeOutMaxVal 1.3.6.1.4.1.2011.10.2.42.1.1.12 integer32 read-only
The upper limit of timeout which be confined to the h3cEponMsgTimeOut.
         h3cEponMsgLoseNumMinVal 1.3.6.1.4.1.2011.10.2.42.1.1.13 integer32 read-only
The lower limit of time which be confined to the h3cEponMsgLoseNum.
         h3cEponMsgLoseNumMaxVal 1.3.6.1.4.1.2011.10.2.42.1.1.14 integer32 read-only
The upper limit of time which be confined to the h3cEponMsgLoseNum.
         h3cEponSysScalarGroup 1.3.6.1.4.1.2011.10.2.42.1.1.15
         h3cEponSysManTable 1.3.6.1.4.1.2011.10.2.42.1.1.16 no-access
This table defines system related parameters.
               h3cEponSysManEntry 1.3.6.1.4.1.2011.10.2.42.1.1.16.1 no-access
The entry of the table h3cEponSysManTable.
                   h3cEponSlotIndex 1.3.6.1.4.1.2011.10.2.42.1.1.16.1.1 integer32 no-access
Slot Index, the index of h3cEponSysManTable.
                   h3cEponModeSwitch 1.3.6.1.4.1.2011.10.2.42.1.1.16.1.2 integer read-write
cmode - epon standard mode. hmode - private mode. Enumeration: 'hmode': 2, 'cmode': 1.
                   h3cEponAutomaticMode 1.3.6.1.4.1.2011.10.2.42.1.1.16.1.3 integer read-write
Automatic mode setting: when enabled - after new OLT is added, the OLT stack sets its encryption mode to 'triple churning' and configure the OLT to authorize ONU MAC addresses according to its table. enable -enable automatic mode. disable -disable automatic mode. Enumeration: 'enable': 1, 'disable': 2.
                   h3cEponOamDiscoveryTimeout 1.3.6.1.4.1.2011.10.2.42.1.1.16.1.4 integer32 read-write
Time out parameter for extended OAM discovery process message, ranging from 0 to 2550, measured in 100 milliseconds.
                   h3cEponEncryptionNoReplyTimeOut 1.3.6.1.4.1.2011.10.2.42.1.1.16.1.5 integer32 read-write
Encryption response timeout, ranging from 1 to 2550, measured in 100 milliseconds.
                   h3cEponEncryptionUpdateTime 1.3.6.1.4.1.2011.10.2.42.1.1.16.1.6 integer32 read-write
Encryption key update timer for all ONUs on slot, indicated by h3cEponSlotIndex, ranging from 1 to 255, measured in seconds.
                   h3cEponAutoBindStatus 1.3.6.1.4.1.2011.10.2.42.1.1.16.1.7 integer read-write
enable - auto bind ONU ID when the ONU registered in the EPON system. disable - need manual bind ONU ID when the ONU registered in the EPON system. Enumeration: 'enable': 1, 'disable': 2.
         h3cEponAutoUpdateTable 1.3.6.1.4.1.2011.10.2.42.1.1.17 no-access
EPON auto update ONU application configuration.
               h3cEponAutoUpdateEntry 1.3.6.1.4.1.2011.10.2.42.1.1.17.1 no-access
The entry of the table h3cEponAutoUpdateTable.
                   h3cEponAutoUpdateFileName 1.3.6.1.4.1.2011.10.2.42.1.1.17.1.1 displaystring read-write
The name of ONU application file, the file name must be valid and include the path. It is a zero length string by default.
                   h3cEponAutoUpdateSchedStatus 1.3.6.1.4.1.2011.10.2.42.1.1.17.1.2 integer read-write
The status of schedule update configuration. The h3cEponAutoUpdateFileName must be set before enable h3cEponAutoUpdateSchedStatus. enable - enable ONU schedule update. disable - disable ONU schedule update. Enumeration: 'enable': 1, 'disable': 2.
                   h3cEponAutoUpdateSchedTime 1.3.6.1.4.1.2011.10.2.42.1.1.17.1.3 octet string read-write
The schedule update timing configuration is related to the h3cEponAutoUpdateSchedType. auto update daily: the string format is hhmm auto update weekly: the string format is hhmmw 'w' means update weekly, it ranges from 0 to 6: 0 - Sunday. 1 - Monday. 2 - Tuesday. 3 - Wednesday. 4 - Thursday. 5 - Friday. 6 - Saturday. auto update in coming date : the string format is hhmmyyyymmdd. The configuration will take effect only if h3cEponAutoUpdateSchedStatus is enabled.
                   h3cEponAutoUpdateSchedType 1.3.6.1.4.1.2011.10.2.42.1.1.17.1.4 integer read-write
The update type of auto updating configuration. daily - update ONU application every day. weekly - update ONU application every week. comingdate - update ONU application on coming date. Enumeration: 'comingdate': 3, 'daily': 1, 'weekly': 2.
                   h3cEponAutoUpdateRealTimeStatus 1.3.6.1.4.1.2011.10.2.42.1.1.17.1.5 integer read-write
The status of real time update configuration. The h3cEponAutoUpdateFileName must be set before enable h3cEponAutoUpdateRealTimeStatus. enable - enable ONU real time update. disable - disable ONU real time update. Enumeration: 'enable': 1, 'disable': 2.
         h3cEponOuiIndexNextTable 1.3.6.1.4.1.2011.10.2.42.1.1.18 no-access
Next OUI index table.
               h3cEponOuiIndexNextEntry 1.3.6.1.4.1.2011.10.2.42.1.1.18.1 no-access
The entry of the table h3cEponOuiIndexNextTable.
                   h3cEponOuiIndexNext 1.3.6.1.4.1.2011.10.2.42.1.1.18.1.1 integer32 read-only
This object contains an appropriate value to be used for h3cEponOuiIndex when creating rows in the h3cEponOuiTable.
         h3cEponOuiTable 1.3.6.1.4.1.2011.10.2.42.1.1.19 no-access
List of OUI and OAM supported by OLT.
               h3cEponOuiEntry 1.3.6.1.4.1.2011.10.2.42.1.1.19.1 no-access
The entry of the table h3cEponOuiTable.
                   h3cEponOuiIndex 1.3.6.1.4.1.2011.10.2.42.1.1.19.1.1 integer32 no-access
The index of this table.
                   h3cEponOuiValue 1.3.6.1.4.1.2011.10.2.42.1.1.19.1.2 octet string read-only
OUI list supported by the extended OAM discovery process. The OUI is composed of six octets. The first six octets denote the first OUI , the second six octets denote the second OUI, and the like.
                   h3cEponOamVersion 1.3.6.1.4.1.2011.10.2.42.1.1.19.1.3 octet string read-only
Version of OAM protocol defined by the organization denoted by OUI.
                   h3cEponOuiRowStatus 1.3.6.1.4.1.2011.10.2.42.1.1.19.1.4 rowstatus read-only
The status of this table entry. Only active, createAndGo and the destory are supported.
         h3cEponMulticastControlTable 1.3.6.1.4.1.2011.10.2.42.1.1.20 no-access
Multicast control global configuration.
               h3cEponMulticastControlEntry 1.3.6.1.4.1.2011.10.2.42.1.1.20.1 no-access
The entry of the table h3cEponMulticastControlTable.
                   h3cEponMulticastVlanId 1.3.6.1.4.1.2011.10.2.42.1.1.20.1.1 integer32 no-access
The index of this table.
                   h3cEponMulticastAddressList 1.3.6.1.4.1.2011.10.2.42.1.1.20.1.2 octet string read-only
The multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like.
                   h3cEponMulticastStatus 1.3.6.1.4.1.2011.10.2.42.1.1.20.1.3 rowstatus read-only
The status of this table entry. Only active, createAndGo and the destory are supported.
     h3cEponFileName 1.3.6.1.4.1.2011.10.2.42.1.2
         h3cEponDbaUpdateFileName 1.3.6.1.4.1.2011.10.2.42.1.2.1 octet string read-write
The name of a binary file which is loaded to the OLT from an external source. Note that the filename must contain the file path.
         h3cEponOnuUpdateFileName 1.3.6.1.4.1.2011.10.2.42.1.2.2 octet string read-write
The filename of the ONU firmware to be updated. Note that the filename must contain the file path.
     h3cEponOltMan 1.3.6.1.4.1.2011.10.2.42.1.3
         h3cOltSysManTable 1.3.6.1.4.1.2011.10.2.42.1.3.1 no-access
This table defines several OLT system parameters: (1)laser on time (2)laser off time (3)whether multiple copy broadcast (4)whether discard packet (5)self test (6)self test result
             h3cOltSysManEntry 1.3.6.1.4.1.2011.10.2.42.1.3.1.1 no-access
The entry of the table h3cOltSysManTable.
                 h3cOltLaserOnTime 1.3.6.1.4.1.2011.10.2.42.1.3.1.1.1 integer32 read-write
The laser on time of the ONUs during the discovery process, measured in Time Quanta(TQ).
                 h3cOltLaserOffTime 1.3.6.1.4.1.2011.10.2.42.1.3.1.1.2 integer32 read-write
The laser off time of the ONUs during the discovery process, measured in TQ.
                 h3cOltMultiCopyBrdCast 1.3.6.1.4.1.2011.10.2.42.1.3.1.1.3 truthvalue read-write
true/false filtering of tagged multicast frames. The software avert tagged downstream frames with multicast or broadcast DA to the PON and not to the CPU, except for special multicast frames (link-constraint, IGMP control and ARP) that are passed to the CPU regardless of this feature.
                 h3cOltEnableDiscardPacket 1.3.6.1.4.1.2011.10.2.42.1.3.1.1.4 truthvalue read-write
Forward(false)/discard(true) any frames received from unlearned source address when the inside address table of the original ONU entry reach to the limit.
                 h3cOltSelfTest 1.3.6.1.4.1.2011.10.2.42.1.3.1.1.5 integer read-write
selftest(1): Test OLT to check whether it's OK. Enumeration: 'selftest': 1.
                 h3cOltSelfTestResult 1.3.6.1.4.1.2011.10.2.42.1.3.1.1.6 integer read-only
The self test result of the specific OLT. other(1): The self test result is another reason. ok(2): The self test result is OK. fail(3): The self test result is fail. Enumeration: 'fail': 3, 'other': 1, 'ok': 2.
                 h3cOltMaxRtt 1.3.6.1.4.1.2011.10.2.42.1.3.1.1.7 unsigned32 read-write
Set the max Round Trip Time of this OLT.
         h3cOltInfoTable 1.3.6.1.4.1.2011.10.2.42.1.3.2 no-access
Primary status of the specified OLT. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified OLT (h3cOltFirmMajorVersion, h3cOltFirmMinorVersion, h3cOltHardMajorVersion, h3cOltHardMinorVersion) (2)Several physical capabilities of an OLT device. (h3cOltAgcLockTime, h3cOltAgcCdrTime) (3)The operation(activation) status of an OLT. (h3cOltMacAddress, h3cOltWorkMode)
             h3cOltInfoEntry 1.3.6.1.4.1.2011.10.2.42.1.3.2.1 no-access
The entry of the table h3cOltInfoTable.
                 h3cOltFirmMajorVersion 1.3.6.1.4.1.2011.10.2.42.1.3.2.1.1 octet string read-only
OLT firmware major version. If the object length is zero, it means the version is unknown.
                 h3cOltFirmMinorVersion 1.3.6.1.4.1.2011.10.2.42.1.3.2.1.2 octet string read-only
OLT firmware minor version. If the object length is zero, it means the version is unknown.
                 h3cOltHardMajorVersion 1.3.6.1.4.1.2011.10.2.42.1.3.2.1.3 octet string read-only
OLT hardware major version. If the object length is zero, it means the version is unknown.
                 h3cOltHardMinorVersion 1.3.6.1.4.1.2011.10.2.42.1.3.2.1.4 octet string read-only
OLT hardware minor version. If the object length is zero, it means the version is unknown.
                 h3cOltAgcLockTime 1.3.6.1.4.1.2011.10.2.42.1.3.2.1.5 integer32 read-only
PON upstream data Automatic Gain Control(AGC) lock time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value.
                 h3cOltAgcCdrTime 1.3.6.1.4.1.2011.10.2.42.1.3.2.1.6 integer32 read-only
PON RX signal synchronization time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value
                 h3cOltMacAddress 1.3.6.1.4.1.2011.10.2.42.1.3.2.1.7 macaddress read-only
OLT MAC address.
                 h3cOltWorkMode 1.3.6.1.4.1.2011.10.2.42.1.3.2.1.8 integer read-only
The operation(activation) modes of an OLT. other(1) - The OLT is in another mode. open(2) - The OLT is open. reset(3) - The OLT is reset. closed(4) - The OLT is closed. Enumeration: 'reset': 3, 'other': 1, 'open': 2, 'closed': 4.
                 h3cOltOpticalPowerTx 1.3.6.1.4.1.2011.10.2.42.1.3.2.1.9 integer32 read-only
The optical power transmitted by this OLT. It measured in 0.01 dBm unit.
                 h3cOltOpticalPowerRx 1.3.6.1.4.1.2011.10.2.42.1.3.2.1.10 integer32 read-only
The burst optical power received by this OLT. It measured in 0.01 dBm unit.
         h3cOltDbaManTable 1.3.6.1.4.1.2011.10.2.42.1.3.3 no-access
This table defines the primary parameters of the Dynamic Bandwidth Allocation(DBA) algorithm applying to the OLT.
             h3cOltDbaManEntry 1.3.6.1.4.1.2011.10.2.42.1.3.3.1 no-access
The entry of the table h3cOltDbaManTable.
                 h3cOltDbaEnabledType 1.3.6.1.4.1.2011.10.2.42.1.3.3.1.1 integer read-write
Enable different types of the DBA algorithm. Start upstream dynamic bandwidth allocation algorithm, replacing former bandwidth allocation mechanism. internal(1) - OLT internal Service Level Agreement(SLA) based algorithm, always being activated. external(2) - DBA algorithm in a binary file which is loaded to the OLT from an external source. Enumeration: 'internal': 1, 'external': 2.
                 h3cOltDbaDiscoveryLength 1.3.6.1.4.1.2011.10.2.42.1.3.3.1.2 integer32 read-write
Discovery length in TQ units.
                 h3cOltDbaDiscovryFrequency 1.3.6.1.4.1.2011.10.2.42.1.3.3.1.3 integer32 read-write
How often should the OLT send discovery frames to the ONUs, measured in grant cycles.
                 h3cOltDbaCycleLength 1.3.6.1.4.1.2011.10.2.42.1.3.3.1.4 integer32 read-write
The grant cycle length in TQ units.
                 h3cOltDbaVersion 1.3.6.1.4.1.2011.10.2.42.1.3.3.1.5 octet string read-only
DBA version of the OLT.
                 h3cOltDbaUpdate 1.3.6.1.4.1.2011.10.2.42.1.3.3.1.6 integer read-write
Update(1): Update the DBA algorithm with a binary file which is loaded to the OLT from an external source(flash). Config the MIB object module h3cEponDbaUpdateFileName. Enumeration: 'update': 1.
                 h3cOltDbaUpdateResult 1.3.6.1.4.1.2011.10.2.42.1.3.3.1.7 integer read-only
The latest DBA update result. other: The DBA update result is another reason. ok: The DBA update result is OK. fail: The DBA update result is fail. fileNotExist: The DBA update failed because the file does not exist. notSetFilename: The DBA filename is not set. Enumeration: 'fail': 3, 'notSetFilename': 5, 'fileNotExist': 4, 'other': 1, 'ok': 2.
         h3cOltPortAlarmThresholdTable 1.3.6.1.4.1.2011.10.2.42.1.3.4 no-access
The table defines the alarm threshold of OLT.
             h3cOltPortAlarmThresholdEntry 1.3.6.1.4.1.2011.10.2.42.1.3.4.1 no-access
The entry of the table h3cOltPortAlarmThresholdTable.
                 h3cOltPortAlarmBerEnabled 1.3.6.1.4.1.2011.10.2.42.1.3.4.1.1 truthvalue read-write
Behavior of BER alarm. true(1) - alarm enable. false(2) - alarm disable.
                 h3cOltPortAlarmBerDirect 1.3.6.1.4.1.2011.10.2.42.1.3.4.1.2 integer read-write
Traffic direction to monitor for BER alarm. Enumeration: 'berDownlink': 2, 'berUplink': 1, 'berAll': 3.
                 h3cOltPortAlarmBerThreshold 1.3.6.1.4.1.2011.10.2.42.1.3.4.1.3 integer32 read-write
BER threshold exceed which the alarm is raised.
                 h3cOltPortAlarmFerEnabled 1.3.6.1.4.1.2011.10.2.42.1.3.4.1.4 truthvalue read-write
Behavior of FER alarm. true(1) - alarm enable. false(2) - alarm disable.
                 h3cOltPortAlarmFerDirect 1.3.6.1.4.1.2011.10.2.42.1.3.4.1.5 integer read-write
Traffic direction to monitor for FER alarm. Enumeration: 'ferDownlink': 2, 'ferUplink': 1, 'ferAll': 3.
                 h3cOltPortAlarmFerThreshold 1.3.6.1.4.1.2011.10.2.42.1.3.4.1.6 integer32 read-write
Frame error rate exceed threshold then the alarm is raised.
                 h3cOltPortAlarmLlidMismatchEnabled 1.3.6.1.4.1.2011.10.2.42.1.3.4.1.7 truthvalue read-write
Behavior of LLID mismatch alarm. true(1) - alarm enable. false(2) - alarm disable.
                 h3cOltPortAlarmLlidMismatchThreshold 1.3.6.1.4.1.2011.10.2.42.1.3.4.1.8 integer32 read-write
The minimal number of mismatched frames exceed threshold then LLID mismatch alarm is raised.
                 h3cOltPortAlarmRemoteStableEnabled 1.3.6.1.4.1.2011.10.2.42.1.3.4.1.9 truthvalue read-write
Behavior of remote stable alarm. true(1) - alarm enable. false(2) - alarm disable.
                 h3cOltPortAlarmLocalStableEnabled 1.3.6.1.4.1.2011.10.2.42.1.3.4.1.10 truthvalue read-write
Behavior of local stable alarm. true(1) - alarm enable. false(2) - alarm disable.
                 h3cOltPortAlarmRegistrationEnabled 1.3.6.1.4.1.2011.10.2.42.1.3.4.1.11 truthvalue read-write
Behavior of registration alarm. true(1) - alarm enable. false(2) - alarm disable.
                 h3cOltPortAlarmOamDisconnectionEnabled 1.3.6.1.4.1.2011.10.2.42.1.3.4.1.12 truthvalue read-write
Behavior of Operations Administration and Maintenance(OAM) disconnection alarm. true(1) - alarm enable. false(2) - alarm disable.
                 h3cOltPortAlarmEncryptionKeyEnabled 1.3.6.1.4.1.2011.10.2.42.1.3.4.1.13 truthvalue read-write
Behavior of encryption bad key alarm. true(1) - alarm enable. false(2) - alarm disable.
                 h3cOltPortAlarmVendorSpecificEnabled 1.3.6.1.4.1.2011.10.2.42.1.3.4.1.14 truthvalue read-write
Behavior of vendor specific alarm. true(1) - alarm enable. false(2) - alarm disable.
                 h3cOltPortAlarmRegExcessEnabled 1.3.6.1.4.1.2011.10.2.42.1.3.4.1.15 truthvalue read-write
Behavior of ONU registering over limitation alarm. true(1) - alarm enable. false(2) - alarm disable.
                 h3cOltPortAlarmDFEEnabled 1.3.6.1.4.1.2011.10.2.42.1.3.4.1.16 truthvalue read-write
Behavior of device fatal error alarm. true - alarm enable. false - alarm disable.
         h3cOltLaserOnTimeMinVal 1.3.6.1.4.1.2011.10.2.42.1.3.5 integer32 read-only
The lower limit of time which is confined to h3cOltLaserOnTime.
         h3cOltLaserOnTimeMaxVal 1.3.6.1.4.1.2011.10.2.42.1.3.6 integer32 read-only
The upper limit of time which is confined to h3cOltLaserOnTime.
         h3cOltLaserOffTimeMinVal 1.3.6.1.4.1.2011.10.2.42.1.3.7 integer32 read-only
The lower limit of time which is confined to h3cOltLaserOffTime.
         h3cOltLaserOffTimeMaxVal 1.3.6.1.4.1.2011.10.2.42.1.3.8 integer32 read-only
The upper limit of time which is confined to h3cOltLaserOffTime.
         h3cOltDbaDiscoveryLengthMinVal 1.3.6.1.4.1.2011.10.2.42.1.3.9 integer32 read-only
The lower limit of the discovery length which is confined to h3cOltDbaDiscoveryLength.
         h3cOltDbaDiscoveryLengthMaxVal 1.3.6.1.4.1.2011.10.2.42.1.3.10 integer32 read-only
The upper limit of the discovery length which is confined to h3cOltDbaDiscoveryLength.
         h3cOltDbaDiscovryFrequencyMinVal 1.3.6.1.4.1.2011.10.2.42.1.3.11 integer32 read-only
The lower limit of the discovery length which is confined to h3cOltDbaDiscovryFrequency.
         h3cOltDbaDiscovryFrequencyMaxVal 1.3.6.1.4.1.2011.10.2.42.1.3.12 integer32 read-only
The upper limit of the discovery length which is confined to h3cOltDbaDiscovryFrequency.
         h3cOltDbaCycleLengthMinVal 1.3.6.1.4.1.2011.10.2.42.1.3.13 integer32 read-only
The lower limit of the frames which is confined to h3cOltDbaCycleLength.
         h3cOltDbaCycleLengthMaxVal 1.3.6.1.4.1.2011.10.2.42.1.3.14 integer32 read-only
The upper limit of the frames which is confined to h3cOltDbaCycleLength.
         h3cOltPortAlarmLlidMisMinVal 1.3.6.1.4.1.2011.10.2.42.1.3.15 integer32 read-only
The lower limit of the frames which is confined to h3cOltPortAlarmLlidMismatchThreshold.
         h3cOltPortAlarmLlidMisMaxVal 1.3.6.1.4.1.2011.10.2.42.1.3.16 integer32 read-only
The upper limit of the frames which is confined to h3cOltPortAlarmLlidMismatchThreshold.
         h3cOltPortAlarmBerMinVal 1.3.6.1.4.1.2011.10.2.42.1.3.17 integer32 read-only
The lower limit of threshold which is confined to h3cOltPortAlarmBerThreshold.
         h3cOltPortAlarmBerMaxVal 1.3.6.1.4.1.2011.10.2.42.1.3.18 integer32 read-only
The upper limit of threshold which is confined to h3cOltPortAlarmBerThreshold.
         h3cOltPortAlarmFerMinVal 1.3.6.1.4.1.2011.10.2.42.1.3.19 integer32 read-only
The lower limit of threshold which is confined to h3cOltPortAlarmFerThreshold.
         h3cOltPortAlarmFerMaxVal 1.3.6.1.4.1.2011.10.2.42.1.3.20 integer32 read-only
The upper limit of threshold which is confined to h3cOltPortAlarmFerThreshold.
         h3cOnuSilentTable 1.3.6.1.4.1.2011.10.2.42.1.3.21 no-access
This table is used for getting silent ONU information of OLT.
               h3cOnuSilentEntry 1.3.6.1.4.1.2011.10.2.42.1.3.21.1 no-access
The entry of the table h3cOnuSilentTable.
                   h3cOnuSilentMacAddr 1.3.6.1.4.1.2011.10.2.42.1.3.21.1.1 macaddress no-access
The MAC address of silent ONUs in OLT.
                   h3cOnuSilentTime 1.3.6.1.4.1.2011.10.2.42.1.3.21.1.2 integer32 read-only
The aging time of a silent ONU.
         h3cOltUsingOnuTable 1.3.6.1.4.1.2011.10.2.42.1.3.22 no-access
The table containing configurations to manage ONU interface(s) based on OLT interface.
               h3cOltUsingOnuEntry 1.3.6.1.4.1.2011.10.2.42.1.3.22.1 no-access
The entry of the table h3cOltUsingOnuTable.
                   h3cOltUsingOnuNum 1.3.6.1.4.1.2011.10.2.42.1.3.22.1.1 integer32 no-access
The ONU interface number. This value is used to specify the ONU interface which the user wants to configure for an OLT interface.
                   h3cOltUsingOnuIfIndex 1.3.6.1.4.1.2011.10.2.42.1.3.22.1.2 integer32 read-only
The ifIndex of the ONU interface.
                   h3cOltUsingOnuRowStatus 1.3.6.1.4.1.2011.10.2.42.1.3.22.1.3 rowstatus read-only
This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation.
     h3cEponOnuMan 1.3.6.1.4.1.2011.10.2.42.1.5
         h3cOnuSysManTable 1.3.6.1.4.1.2011.10.2.42.1.5.1 no-access
This table implements the following functions for ONUs: 1. Encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). 2. Restart a process of ONU authentication, using the OLT (IEEE 802.1x) authenticator.
             h3cOnuSysManEntry 1.3.6.1.4.1.2011.10.2.42.1.5.1.1 no-access
The entry of the table h3cOnuSysManTable.
                 h3cOnuEncryptMan 1.3.6.1.4.1.2011.10.2.42.1.5.1.1.1 integer read-write
Start encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). ONU registration encryption key is used as an initial value. If the encryption key was updated after ONU registration, the last updated key is used. off(1): - Stop encrypting. downlink(2): - Start encrypting all downstream directions traffic. updownlink(3): - Start encrypting all downstream/upstream directions traffic. Enumeration: 'downlink': 2, 'off': 1, 'updownlink': 3.
                 h3cOnuReAuthorize 1.3.6.1.4.1.2011.10.2.42.1.5.1.1.2 integer read-write
Restart a process of ONU authentication. If 802.1x authentication is enabled, the OLT (IEEE 802.1x) authenticator is applied. Otherwise, use the default authentication. Until the reauthentication succeeds, the ONU remains its previous authorization mode. The reauthentication process includes a new authentication request sent to the authentication server. Enumeration: 'reAuthorize': 1.
                 h3cOnuMulticastFilterStatus 1.3.6.1.4.1.2011.10.2.42.1.5.1.1.3 truthvalue read-write
true(1) - Multicast-Filter enable on ONU. false(2) - Multicast-Filter disable on ONU.
                 h3cOnuDbaReportQueueSetNumber 1.3.6.1.4.1.2011.10.2.42.1.5.1.1.4 integer32 read-write
The number of queue sets reported in MPCP report frames.
                 h3cOnuRemoteFecStatus 1.3.6.1.4.1.2011.10.2.42.1.5.1.1.5 integer read-write
Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction see [802.3ah] clause 65.2. enable - enable remote forward error correction. disable - disable remote forward error correction. Enumeration: 'enable': 1, 'disable': 2.
                 h3cOnuPortBerStatus 1.3.6.1.4.1.2011.10.2.42.1.5.1.1.6 integer read-write
enable - enable ONU port bit error rate alarm. disable - disable ONU port bit error rate alarm. Enumeration: 'enable': 1, 'disable': 2.
                 h3cOnuReset 1.3.6.1.4.1.2011.10.2.42.1.5.1.1.7 integer read-write
Reboot ONU. Enumeration: 'reset': 1.
                 h3cOnuMulticastControlMode 1.3.6.1.4.1.2011.10.2.42.1.5.1.1.8 integer read-write
igmpsnooping - the traditional IGMP snooping mode. multicastcontrol - the specific multicast control mode. Enumeration: 'multicastcontrol': 2, 'igmpsnooping': 1.
                 h3cOnuAccessVlan 1.3.6.1.4.1.2011.10.2.42.1.5.1.1.9 integer32 read-write
The VLAN ID assigned to untagged frames received on ONU.
                 h3cOnuEncryptKey 1.3.6.1.4.1.2011.10.2.42.1.5.1.1.10 displaystring read-write
The encryption key, used to encrypt all downstream traffic destined to and/or upstream traffic originating from a specific ONU. It is a zero length, or MD5 hashed string, by default, the string is empty.
                 h3cOnuUniUpDownTrapStatus 1.3.6.1.4.1.2011.10.2.42.1.5.1.1.11 truthvalue read-write
true - A notification will be sent when UNI link status is change. false - Device will not sent notification when UNI link status is change.
                 h3cOnuFecStatus 1.3.6.1.4.1.2011.10.2.42.1.5.1.1.12 integer read-write
Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction (include remote onu and local OLT) see [802.3ah] clause 65.2 enable - enable forward error correction. disable - disable forward error correction. Enumeration: 'enable': 1, 'disable': 2.
                 h3cOnuMcastCtrlHostAgingTime 1.3.6.1.4.1.2011.10.2.42.1.5.1.1.13 integer32 read-write
The host aging time of multicast control mode on ONU, ranging from 200 to 1000, measured in seconds.
                 h3cOnuMulticastFastLeaveEnable 1.3.6.1.4.1.2011.10.2.42.1.5.1.1.14 truthvalue read-write
true(1) - Enable multicast fast leave attribute on all ethernet UNIs of the ONU. false(2) - Disable multicast fast leave attribute on all ethernet UNIs of the ONU.
                 h3cOnuPortIsolateEnable 1.3.6.1.4.1.2011.10.2.42.1.5.1.1.15 truthvalue read-write
true(1) - Enable port isolate setting on all ethernet UNIs of the ONU. false(2) - Disable port isolate setting on all ethernet UNIs of the ONU.
         h3cOnuLinkTestTable 1.3.6.1.4.1.2011.10.2.42.1.5.2 no-access
LLID link test applying to the ONU only including delay measurement option. The command tests a link to a single LLID over a period of time or once, using a variable number of measurement frames. The length of the measurement frames is also parameterized. The test uses a loopback mode of the ONU to return each measurement frame, loopback activation is done using randomly patterned OAM Protocol Data Unit(PDU) frames.
             h3cOnuLinkTestEntry 1.3.6.1.4.1.2011.10.2.42.1.5.2.1 no-access
The entry of h3cOnuLinkTestEntry.
                 h3cOnuLinkTestFrameNum 1.3.6.1.4.1.2011.10.2.42.1.5.2.1.1 integer32 read-write
Exact number of measurement frames.
                 h3cOnuLinkTestFrameSize 1.3.6.1.4.1.2011.10.2.42.1.5.2.1.2 integer32 read-write
Measurement frames data size, measured in bytes. Not including Preamble, SFD, VLAN tag, and FCS. Frame size minimum value is 56 - if VLAN tag is enabled('VLAN enable' field is set to ENABLE), and 60 - if VLAN tag is disabled. The actual measurement frames sent to the PON are always minimum 60 bytes long. When VLAN tag is enabled, the actual measurement frames size including FCS may reach (1514+4+4=)1522 bytes. 60(60 is VLAN tag disabled) - 1514 .
                 h3cOnuLinkTestDelay 1.3.6.1.4.1.2011.10.2.42.1.5.2.1.3 truthvalue read-write
true:Link test includes delay measurement, which corresponds to the difference between sent and received times(including granting delay and firmware processing time overheads). false:Link test not includes a delay measurement.
                 h3cOnuLinkTestVlanTag 1.3.6.1.4.1.2011.10.2.42.1.5.2.1.4 truthvalue read-write
true:Enable VLAN tag in link test frames. false:Link test not includes frames with VLAN tag.
                 h3cOnuLinkTestVlanPriority 1.3.6.1.4.1.2011.10.2.42.1.5.2.1.5 integer32 read-write
VLAN priority: 0-7.
                 h3cOnuLinkTestVlanTagID 1.3.6.1.4.1.2011.10.2.42.1.5.2.1.6 integer32 read-write
VLAN ID: 1-4094.
                 h3cOnuLinkTestResultSentFrameNum 1.3.6.1.4.1.2011.10.2.42.1.5.2.1.7 integer32 read-only
The total number of frames sent during the link test process.
                 h3cOnuLinkTestResultRetFrameNum 1.3.6.1.4.1.2011.10.2.42.1.5.2.1.8 integer32 read-only
The total number of frames return back during the link test process.
                 h3cOnuLinkTestResultRetErrFrameNum 1.3.6.1.4.1.2011.10.2.42.1.5.2.1.9 integer32 read-only
The total number of error frames return back during the link test process.
                 h3cOnuLinkTestResultMinDelay 1.3.6.1.4.1.2011.10.2.42.1.5.2.1.10 integer32 read-only
The minimum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'h3cOnuLinkTestDelay' is set to be true.
                 h3cOnuLinkTestResultMeanDelay 1.3.6.1.4.1.2011.10.2.42.1.5.2.1.11 integer32 read-only
The average delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'h3cOnuLinkTestDelay' is set to be true.
                 h3cOnuLinkTestResultMaxDelay 1.3.6.1.4.1.2011.10.2.42.1.5.2.1.12 integer32 read-only
The maximum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'h3cOnuLinkTestDelay' is set to be true.
         h3cOnuBandWidthTable 1.3.6.1.4.1.2011.10.2.42.1.5.3 no-access
Set bandwidth policy parameters(restrictions)for a LLID (only for the ONU). Default policies are set to disable. Policy parameters will be erased upon LLID network disconnection.
             h3cOnuBandWidthEntry 1.3.6.1.4.1.2011.10.2.42.1.5.3.1 no-access
The entry of table h3cOnuBandWidthTable.
                 h3cOnuDownStreamBandWidthPolicy 1.3.6.1.4.1.2011.10.2.42.1.5.3.1.1 truthvalue read-write
true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.
                 h3cOnuDownStreamMaxBandWidth 1.3.6.1.4.1.2011.10.2.42.1.5.3.1.2 integer32 read-write
Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.
                 h3cOnuDownStreamMaxBurstSize 1.3.6.1.4.1.2011.10.2.42.1.5.3.1.3 integer32 read-write
Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.
                 h3cOnuDownStreamHighPriorityFirst 1.3.6.1.4.1.2011.10.2.42.1.5.3.1.4 truthvalue read-write
true:Enable high priority frames preference. false:Disable high priority frames preference.
                 h3cOnuDownStreamShortFrameFirst 1.3.6.1.4.1.2011.10.2.42.1.5.3.1.5 truthvalue read-write
true:Enable short frames preference. false:Disable short frames preference.
                 h3cOnuP2PBandWidthPolicy 1.3.6.1.4.1.2011.10.2.42.1.5.3.1.6 truthvalue read-write
true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.
                 h3cOnuP2PMaxBandWidth 1.3.6.1.4.1.2011.10.2.42.1.5.3.1.7 integer32 read-write
Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.
                 h3cOnuP2PMaxBurstSize 1.3.6.1.4.1.2011.10.2.42.1.5.3.1.8 integer32 read-write
Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.
                 h3cOnuP2PHighPriorityFirst 1.3.6.1.4.1.2011.10.2.42.1.5.3.1.9 truthvalue read-write
true:Enable high priority frames preference. false:Disable high priority frames preference.
                 h3cOnuP2PShortFrameFirst 1.3.6.1.4.1.2011.10.2.42.1.5.3.1.10 truthvalue read-write
true:Enable short frames preference. false:Disable short frames preference.
         h3cOnuSlaManTable 1.3.6.1.4.1.2011.10.2.42.1.5.4 no-access
Two types of DBA algorithm are supported in the ONU. The internal SLA based algorithm is always activated. This table defines the primary parameter about the internal SLA algorithm.
             h3cOnuSlaManEntry 1.3.6.1.4.1.2011.10.2.42.1.5.4.1 no-access
The entry of table h3cOnuSlaManTable.
                 h3cOnuSlaMaxBandWidth 1.3.6.1.4.1.2011.10.2.42.1.5.4.1.1 integer32 read-write
Maximum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of h3cOnuSlaBandWidthStepVal. The minimum bandwidth should not be larger than the maximum bandwidth.
                 h3cOnuSlaMinBandWidth 1.3.6.1.4.1.2011.10.2.42.1.5.4.1.2 integer32 read-write
Minimum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of h3cOnuSlaBandWidthStepVal. The maximum bandwidth should be larger than the minimum bandwidth.
                 h3cOnuSlaBandWidthStepVal 1.3.6.1.4.1.2011.10.2.42.1.5.4.1.3 integer32 read-only
Granularity of bandwidth - measured in Kbit/s. The value of h3cOnuSlaMaxBandWidth and h3cOnuSlaMinBandWidth should be the multiple of the value of this object.
                 h3cOnuSlaDelay 1.3.6.1.4.1.2011.10.2.42.1.5.4.1.4 integer read-write
low - low delay. high - high delay. The delay constraint of a specific ONU. Set to high may improve the bandwidth usage at the cost of delay. Enumeration: 'high': 2, 'low': 1.
                 h3cOnuSlaFixedBandWidth 1.3.6.1.4.1.2011.10.2.42.1.5.4.1.5 integer32 read-write
Fixed bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of h3cOnuSlaBandWidthStepVal.
                 h3cOnuSlaPriorityClass 1.3.6.1.4.1.2011.10.2.42.1.5.4.1.6 integer32 read-write
Precedence of this flow over others in case of contention. 0 is the lowest priority and 7 is the highest priority.
                 h3cOnuSlaFixedPacketSize 1.3.6.1.4.1.2011.10.2.42.1.5.4.1.7 integer32 read-write
Fixed packet size - measured in byte. The value of this object should be valid when h3cOnuSlaFixedBandWidth is configured.
         h3cOnuInfoTable 1.3.6.1.4.1.2011.10.2.42.1.5.5 no-access
Primary status of the specified ONU. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified ONU (h3cOnuHardMajorVersion, h3cOnuHardMinorVersion, h3cOnuUniMacType) (2)Several physical capabilities of the ONU. (h3cOnuLaserOnTime, h3cOnuLaserOffTime, h3cOnuGrantFifoDep.) (3)The operation(activation) status of the ONU. (h3cOnuWorkMode)
             h3cOnuInfoEntry 1.3.6.1.4.1.2011.10.2.42.1.5.5.1 no-access
The entry of the h3cOnuInfoTable.
                 h3cOnuHardMajorVersion 1.3.6.1.4.1.2011.10.2.42.1.5.5.1.1 octet string read-only
ONU hardware major version. If the object length is zero, it means the version is unknown.
                 h3cOnuHardMinorVersion 1.3.6.1.4.1.2011.10.2.42.1.5.5.1.2 octet string read-only
ONU hardware minor version. If the object length is zero, it means the version is unknown.
                 h3cOnuSoftwareVersion 1.3.6.1.4.1.2011.10.2.42.1.5.5.1.3 octet string read-only
ONU software version.
                 h3cOnuUniMacType 1.3.6.1.4.1.2011.10.2.42.1.5.5.1.4 integer read-only
ONU User Network Interface(UNI) port MAC type. Enumeration: 'mii': 2, 'tbi': 4, 'other': 1, 'gmii': 3.
                 h3cOnuLaserOnTime 1.3.6.1.4.1.2011.10.2.42.1.5.5.1.5 integer32 read-only
The ONU laser on time measured in TQ units. If the object value is 0x7FFFFFFF, it means h3cOnuLaserOnTime is unknown.
                 h3cOnuLaserOffTime 1.3.6.1.4.1.2011.10.2.42.1.5.5.1.6 integer32 read-only
The ONU laser off time measured in TQ units. If the object value is 0x7FFFFFFF, it means h3cOnuLaserOffTime is unknown.
                 h3cOnuGrantFifoDep 1.3.6.1.4.1.2011.10.2.42.1.5.5.1.7 integer32 read-only
Maximal number of grant records an ONU can store, relevant to ONU only. range: 1 - 255. 0x7FFFFFFF: unknown value.
                 h3cOnuWorkMode 1.3.6.1.4.1.2011.10.2.42.1.5.5.1.8 integer read-only
The operation(activation) mode of an ONU. other(1) - ONU is in another mode. on(2) - ONU is registered and authorized to the network. In this mode it works as a media converter. pending(3) - ONU has been registered to the PON, but not authorized to the network. off(4) - ONU is not registered to the network. Enumeration: 'on': 2, 'other': 1, 'off': 4, 'pending': 3.
                 h3cOnuPCBVersion 1.3.6.1.4.1.2011.10.2.42.1.5.5.1.9 octet string read-only
ONU PCB version.
                 h3cOnuRtt 1.3.6.1.4.1.2011.10.2.42.1.5.5.1.10 unsigned32 read-only
The signal round-trip-time(RTT) received.
                 h3cOnuEEPROMVersion 1.3.6.1.4.1.2011.10.2.42.1.5.5.1.11 octet string read-only
ONU EEPROM version.
                 h3cOnuRegType 1.3.6.1.4.1.2011.10.2.42.1.5.5.1.12 octet string read-only
ONU registered type.
                 h3cOnuHostType 1.3.6.1.4.1.2011.10.2.42.1.5.5.1.13 octet string read-only
ONU host type.
                 h3cOnuDistance 1.3.6.1.4.1.2011.10.2.42.1.5.5.1.14 integer32 read-only
The distance between OLT and ONU, measured in meter.
                 h3cOnuLlid 1.3.6.1.4.1.2011.10.2.42.1.5.5.1.15 integer32 read-only
The link layer identifier, which uniquely identifies the ONU of a specific OLT.
                 h3cOnuVendorId 1.3.6.1.4.1.2011.10.2.42.1.5.5.1.16 octet string read-only
ONU vendor ID.
                 h3cOnuFirmwareVersion 1.3.6.1.4.1.2011.10.2.42.1.5.5.1.17 octet string read-only
ONU firmware version.
                 h3cOnuOpticalPowerReceivedByOlt 1.3.6.1.4.1.2011.10.2.42.1.5.5.1.18 integer32 read-only
The burst ONU optical power received by OLT, and when the ONU status is up the value is usable. It measured in 0.01 dBm unit.
         h3cOnuMacAddrInfoTable 1.3.6.1.4.1.2011.10.2.42.1.5.6 no-access
This table used for getting MAC address information of ONU.
             h3cOnuMacAddrInfoEntry 1.3.6.1.4.1.2011.10.2.42.1.5.6.1 no-access
The entry of the h3cEponOnuMacAddrInfoTable.
                 h3cOnuMacIndex 1.3.6.1.4.1.2011.10.2.42.1.5.6.1.1 integer32 no-access
The index of ONUs in one OLT.
                 h3cOnuMacAddrFlag 1.3.6.1.4.1.2011.10.2.42.1.5.6.1.2 integer read-only
The flag of ONU status. 1 - bound:The ONU is bound but not registered. 2 - registered:The ONU is registered but not bound. 3 - run:The ONU is registered and bound on one OLT. 4 - regIncorrect:The ONU is bound on one OLT and registered on another OLT. Enumeration: 'registered': 2, 'run': 3, 'bound': 1, 'regIncorrect': 4.
                 h3cOnuMacAddress 1.3.6.1.4.1.2011.10.2.42.1.5.6.1.3 macaddress read-only
The MAC address of ONU.
         h3cOnuBindMacAddrTable 1.3.6.1.4.1.2011.10.2.42.1.5.7 no-access
This table implements the following functions for ONUs: Bind MAC of ONU.
             h3cOnuBindMacAddrEntry 1.3.6.1.4.1.2011.10.2.42.1.5.7.1 no-access
The entry of the table h3cOnuBindMacAddrTable.
                 h3cOnuBindMacAddress 1.3.6.1.4.1.2011.10.2.42.1.5.7.1.1 macaddress read-write
Bind the MAC of ONU. While the MAC is not bound, the ONU can not go into effect and configurations can not be set. Set 0-0-0 (MAC address) to the EPON device port will unbind the relationship with the original MAC and configurations will be set to default values.
                 h3cOnuBindType 1.3.6.1.4.1.2011.10.2.42.1.5.7.1.2 integer32 read-write
Set the binding type with the ONU which is confined to the index of h3cEponOnuTypeDescr.
         h3cOnuFirmwareUpdateTable 1.3.6.1.4.1.2011.10.2.42.1.5.8 no-access
This table implements the following functions for ONUs: 1. Update the ONU firmware. 2. Result of update ONU firmware.
             h3cOnuFirmwareUpdateEntry 1.3.6.1.4.1.2011.10.2.42.1.5.8.1 no-access
The entry of the table h3cOnuFirmwareUpdateTable.
                 h3cOnuUpdate 1.3.6.1.4.1.2011.10.2.42.1.5.8.1.1 integer read-write
update(1): Update the ONU firmware. Config the MIB object module h3cEponOnuUpdateFileName with the filename of ONU firmware first. Enumeration: 'update': 1.
                 h3cOnuUpdateResult 1.3.6.1.4.1.2011.10.2.42.1.5.8.1.2 integer read-only
The ONU firmware update result. updating - The ONU is updating firmware right now. ok - The ONU update result is OK. fail - The ONU update result is fail. fileNotExist - The ONU update failed because the file does not exist. notSetFilename - The ONU firmware filename is not set. fileNotMatchONU - The ONU firmware does not match the ONU. timeout - The ONU responses timeout. otherError - The ONU update result is unknown. Enumeration: 'ok': 2, 'otherError': 8, 'fileNotMatchONU': 6, 'notSetFilename': 5, 'timeout': 7, 'fail': 3, 'fileNotExist': 4, 'updating': 1.
                 h3cOnuUpdateFileName 1.3.6.1.4.1.2011.10.2.42.1.5.8.1.3 octet string read-write
The filename of the ONU firmware to be updated. Note that the filename must contain the file path.
         h3cOnuLinkTestFrameNumMinVal 1.3.6.1.4.1.2011.10.2.42.1.5.9 integer32 read-only
The lower limit of measurement frames which is confined to h3cOnuLinkTestFrameNum.
         h3cOnuLinkTestFrameNumMaxVal 1.3.6.1.4.1.2011.10.2.42.1.5.10 integer32 read-only
The upper limit of measurement frames which is confined to h3cOnuLinkTestFrameNum.
         h3cOnuSlaMaxBandWidthMinVal 1.3.6.1.4.1.2011.10.2.42.1.5.11 integer32 read-only
The lower limit of maximum-bandwidth which is confined to h3cOnuSlaMaxBandWidth.
         h3cOnuSlaMaxBandWidthMaxVal 1.3.6.1.4.1.2011.10.2.42.1.5.12 integer32 read-only
The upper limit of maximum-bandwidth which is confined to h3cOnuSlaMaxBandWidth.
         h3cOnuSlaMinBandWidthMinVal 1.3.6.1.4.1.2011.10.2.42.1.5.13 integer32 read-only
The lower limit of minimum-bandwidth which is confined to h3cOnuSlaMinBandWidth.
         h3cOnuSlaMinBandWidthMaxVal 1.3.6.1.4.1.2011.10.2.42.1.5.14 integer32 read-only
The upper limit of minimum-bandwidth which is confined to h3cOnuSlaMinBandWidth.
         h3cEponOnuTypeManTable 1.3.6.1.4.1.2011.10.2.42.1.5.15 no-access
This table is used for getting ONU bind type in current version.
               h3cEponOnuTypeManEntry 1.3.6.1.4.1.2011.10.2.42.1.5.15.1 no-access
The entry of the h3cEponOnuTypeManTable.
                   h3cEponOnuTypeIndex 1.3.6.1.4.1.2011.10.2.42.1.5.15.1.1 integer32 no-access
The ONU type index.
                   h3cEponOnuTypeDescr 1.3.6.1.4.1.2011.10.2.42.1.5.15.1.2 octet string read-only
The ONU type description which can be used to bind ONU in current version. the value of h3cOnuBindType can be configured by the index of h3cEponOnuTypeDescr.
         h3cOnuPacketManTable 1.3.6.1.4.1.2011.10.2.42.1.5.16 no-access
This table implements the following functions: (1)Manage packet priority trust mode. (2)Manage packet queue-scheduler mode.
               h3cOnuPacketManEntry 1.3.6.1.4.1.2011.10.2.42.1.5.16.1 no-access
The entry of the h3cOnuPacketManTable.
                   h3cOnuPriorityTrust 1.3.6.1.4.1.2011.10.2.42.1.5.16.1.1 integer read-write
The QOS mode which is assigned on ONU. dscp - The service dscp of politic Priority. ipprecedence - The service IP precedence of politic Priority. cos - The service cos of politic Priority. Enumeration: 'cos': 3, 'dscp': 1, 'ipprecedence': 2.
                   h3cOnuQueueScheduler 1.3.6.1.4.1.2011.10.2.42.1.5.16.1.2 integer read-write
The packet queue-scheduler mode which is assigned on ONU. spq - strict priority queuing. wfq - specifies the weights for weighted round-robin queuing. Enumeration: 'spq': 1, 'wfq': 2.
         h3cOnuProtocolTable 1.3.6.1.4.1.2011.10.2.42.1.5.17 no-access
This table implements the following functions: (1)Manage STP status. (2)Manage IGMP-snooping. (3)Manage DHCP-snooping.
               h3cOnuProtocolEntry 1.3.6.1.4.1.2011.10.2.42.1.5.17.1 no-access
The entry of h3cOnuProtocolTable.
                   h3cOnuStpStatus 1.3.6.1.4.1.2011.10.2.42.1.5.17.1.1 truthvalue read-write
true(1) - STP status enable on ONU. false(2) - STP status disable on ONU.
                   h3cOnuIgmpSnoopingStatus 1.3.6.1.4.1.2011.10.2.42.1.5.17.1.2 truthvalue read-write
true(1) - IGMP snooping status enable on ONU. false(2) - IGMP snooping status disable on ONU.
                   h3cOnuDhcpsnoopingOption82 1.3.6.1.4.1.2011.10.2.42.1.5.17.1.3 truthvalue read-write
true(1) - DHCP snooping Option 82 status enable on ONU. false(2) - DHCP snooping Option 82 status disable on ONU.
                   h3cOnuDhcpsnooping 1.3.6.1.4.1.2011.10.2.42.1.5.17.1.4 truthvalue read-write
true(1) - DHCP snooping status enable on ONU. false(2) - DHCP snooping status disable on ONU.
                   h3cOnuPppoe 1.3.6.1.4.1.2011.10.2.42.1.5.17.1.5 truthvalue read-write
true(1) - PPPOE status enable on ONU. false(2) - PPPOE status disable on ONU.
                   h3cOnuIgmpSnoopingHostAgingT 1.3.6.1.4.1.2011.10.2.42.1.5.17.1.6 integer32 read-write
Set the host aging time of IGMP on ONU.
                   h3cOnuIgmpSnoopingMaxRespT 1.3.6.1.4.1.2011.10.2.42.1.5.17.1.7 integer32 read-write
Set the max response time of IGMP on ONU.
                   h3cOnuIgmpSnoopingRouterAgingT 1.3.6.1.4.1.2011.10.2.42.1.5.17.1.8 integer32 read-write
Set the router aging time of IGMP on ONU.
                   h3cOnuIgmpSnoopingAggReportS 1.3.6.1.4.1.2011.10.2.42.1.5.17.1.9 truthvalue read-write
true(1) - Igmp snooping aggregation report status enable on ONU. false(2) - Igmp snooping aggregation report status disable on ONU.
                   h3cOnuIgmpSnoopingAggLeaveS 1.3.6.1.4.1.2011.10.2.42.1.5.17.1.10 truthvalue read-write
true(1) - Igmp snooping aggregation leave status enable on ONU. false(2) - Igmp snooping aggregation leave status disable on ONU.
         h3cOnuDot1xTable 1.3.6.1.4.1.2011.10.2.42.1.5.18 no-access
This table implements the following functions: (1)Manage 802.1x account. (2)Manage 802.1x password. ONU will be authorized to send and receive frames when the account and the password are all right, otherwise this ONU will be unavailable.
               h3cOnuDot1xEntry 1.3.6.1.4.1.2011.10.2.42.1.5.18.1 no-access
The entry of the h3cOnuDot1xTable.
                   h3cOnuDot1xAccount 1.3.6.1.4.1.2011.10.2.42.1.5.18.1.1 octet string read-write
ONU 802.1X account. The object value cannot be set as 'a', 'al' or 'all'. The object should be set together with h3cOnuDot1xPassword.
                   h3cOnuDot1xPassword 1.3.6.1.4.1.2011.10.2.42.1.5.18.1.2 octet string read-write
ONU 802.1X password. The object should be set together with h3cOnuDot1xAccount.
         h3cOnuPriorityQueueTable 1.3.6.1.4.1.2011.10.2.42.1.5.19 no-access
This table contains specific information of priority queue.
               h3cOnuPriorityQueueEntry 1.3.6.1.4.1.2011.10.2.42.1.5.19.1 no-access
The entry of h3cOnuPriorityQueueTable.
                   h3cOnuQueueDirection 1.3.6.1.4.1.2011.10.2.42.1.5.19.1.1 integer no-access
The direction of priority queue. Enumeration: 'inbound': 1, 'outbound': 2.
                   h3cOnuQueueId 1.3.6.1.4.1.2011.10.2.42.1.5.19.1.2 integer32 no-access
The queue ID of priority queue.
                   h3cOnuQueueSize 1.3.6.1.4.1.2011.10.2.42.1.5.19.1.3 integer32 read-write
The size of priority queue, measured in percent. The total length of all priority queues is a constant, by default, it is assigned to all of the priority queues evenly. The length of each priority queue may be changed by changing the value of h3cOnuPriorityQueueSize. The total size of the inbound or outbound priority queues should be not more than 100.
         h3cOnuCountTable 1.3.6.1.4.1.2011.10.2.42.1.5.20 no-access
This table contains statistics of ONU port.
               h3cOnuCountEntry 1.3.6.1.4.1.2011.10.2.42.1.5.20.1 no-access
The entry of h3cOnuCountTable.
                   h3cOnuInCRCErrPkts 1.3.6.1.4.1.2011.10.2.42.1.5.20.1.1 counter64 read-only
The total number of frames received with bad CRC checksum.
                   h3cOnuOutDroppedFrames 1.3.6.1.4.1.2011.10.2.42.1.5.20.1.2 counter64 read-only
The total number of frames dropped because of buffer failure.
         h3cEponOnuScalarGroup 1.3.6.1.4.1.2011.10.2.42.1.5.21
               h3cOnuPriorityQueueSizeMinVal 1.3.6.1.4.1.2011.10.2.42.1.5.21.1 integer32 read-only
The lower limit of queue size which is confined to h3cOnuQueueSize.
               h3cOnuPriorityQueueSizeMaxVal 1.3.6.1.4.1.2011.10.2.42.1.5.21.2 integer32 read-only
The upper limit of queue size which is confined to h3cOnuQueueSize.
               h3cOnuPriorityQueueBandwidthMinVal 1.3.6.1.4.1.2011.10.2.42.1.5.21.3 integer32 read-only
The lower limit of h3cOnuQueueMaxBandwidth.
               h3cOnuPriorityQueueBandwidthMaxVal 1.3.6.1.4.1.2011.10.2.42.1.5.21.4 integer32 read-only
The upper limit of h3cOnuQueueMaxBandwidth.
               h3cOnuPriorityQueueBurstsizeMinVal 1.3.6.1.4.1.2011.10.2.42.1.5.21.5 integer32 read-only
The lower limit of h3cOnuQueueMaxBurstsize.
               h3cOnuPriorityQueueBurstsizeMaxVal 1.3.6.1.4.1.2011.10.2.42.1.5.21.6 integer32 read-only
The upper limit of h3cOnuQueueMaxBurstsize.
               h3cOnuUpdateByTypeNextIndex 1.3.6.1.4.1.2011.10.2.42.1.5.21.7 integer32 read-only
Offer a free index of h3cOnuFirmwareUpdateByTypeTable.
         h3cOnuQueueBandwidthTable 1.3.6.1.4.1.2011.10.2.42.1.5.22 no-access
This table contains specific bandwidth information of ONU priority queue.
               h3cOnuQueueBandwidthEntry 1.3.6.1.4.1.2011.10.2.42.1.5.22.1 no-access
The entry of h3cOnuQueueBandwidthTable.
                   h3cOnuQueueMaxBandwidth 1.3.6.1.4.1.2011.10.2.42.1.5.22.1.1 integer32 read-write
The maximum bandwidth of specific ONU priority queue, measured in 100Kbps.
                   h3cOnuQueueMaxBurstsize 1.3.6.1.4.1.2011.10.2.42.1.5.22.1.2 integer32 read-write
The maximum burst size of specific ONU priority queue, measured in 64Bytes.
                   h3cOnuQueuePolicyStatus 1.3.6.1.4.1.2011.10.2.42.1.5.22.1.3 truthvalue read-write
true - enable bandwidth policy false - disable bandwidth policy The bandwidth administrative status of specific ONU priority queue.
         h3cOnuIpAddressTable 1.3.6.1.4.1.2011.10.2.42.1.5.23 no-access
ONU IP address table.
               h3cOnuIpAddressEntry 1.3.6.1.4.1.2011.10.2.42.1.5.23.1 no-access
The entry of h3cOnuIpAddressTable.
                   h3cOnuIpAddress 1.3.6.1.4.1.2011.10.2.42.1.5.23.1.1 ipaddress read-write
The IP address assigned to the ONU.
                   h3cOnuIpAddressMask 1.3.6.1.4.1.2011.10.2.42.1.5.23.1.2 ipaddress read-write
The mask of IP address denoted by h3cOnuIpAddress.
                   h3cOnuIpAddressGateway 1.3.6.1.4.1.2011.10.2.42.1.5.23.1.3 ipaddress read-write
The gateway of IP address denoted by h3cOnuIpAddress.
                   h3cOnuDhcpallocate 1.3.6.1.4.1.2011.10.2.42.1.5.23.1.4 truthvalue read-write
true(1) - ONU auto allocate IP address status enable. false(2) - ONU auto allocate IP address status disable.
                   h3cOnuManageVID 1.3.6.1.4.1.2011.10.2.42.1.5.23.1.5 integer32 read-write
The management VLAN of ONU denoted by h3cOnuManageVID.
                   h3cOnuManageVlanIntfS 1.3.6.1.4.1.2011.10.2.42.1.5.23.1.6 truthvalue read-write
The management interface status of ONU denoted by h3cOnuManageVlanIntfS.
         h3cOnuChipSetInfoTable 1.3.6.1.4.1.2011.10.2.42.1.5.24 no-access
ONU vendor specific information of ONU.
               h3cOnuChipSetInfoEntry 1.3.6.1.4.1.2011.10.2.42.1.5.24.1 no-access
The entry of h3cOnuChipSetInfoTable.
                   h3cOnuChipSetVendorId 1.3.6.1.4.1.2011.10.2.42.1.5.24.1.1 octet string read-only
Chipset vendor ID, which identifies the ONU's PON chip vendor according JEDEC ID code.
                   h3cOnuChipSetModel 1.3.6.1.4.1.2011.10.2.42.1.5.24.1.2 octet string read-only
Chip model, numbering(range from 0 to 0xFF) by the chip vendor.
                   h3cOnuChipSetRevision 1.3.6.1.4.1.2011.10.2.42.1.5.24.1.3 integer32 read-only
Chip revision.
                   h3cOnuChipSetDesignDate 1.3.6.1.4.1.2011.10.2.42.1.5.24.1.4 dateandtime read-only
Chip design date.
         h3cOnuCapabilityTable 1.3.6.1.4.1.2011.10.2.42.1.5.25 no-access
Capability of ONU.
               h3cOnuCapabilityEntry 1.3.6.1.4.1.2011.10.2.42.1.5.25.1 no-access
The entry of the table h3cOnuCapabilityTable.
                   h3cOnuServiceSupported 1.3.6.1.4.1.2011.10.2.42.1.5.25.1.1 bits read-only
Services types supported by the ONU. These functional groups can be supported independently. geinterfacesupport - supporting (1)/not supporting(0) Gbit Ethernet GE interface. feinterfacesupport - supporting (1)/not supporting(0) 100M Ethernet FE interface.(maximum rate is 100M, without GEinterface) voipservicesupport - supporting (1)/not supporting(0)VoIP service. tdmservicesupport - supporting (1)/not supporting(0)TDM CES service. Bits: 'geinterfacesupport': 0, 'voipservicesupport': 2, 'tdmservicesupport': 3, 'feinterfacesupport': 1.
                   h3cOnuGEPortNumber 1.3.6.1.4.1.2011.10.2.42.1.5.25.1.2 integer32 read-only
The current gigabit ethernet ports number supported by the ONU.
                   h3cOnuFEPortNumber 1.3.6.1.4.1.2011.10.2.42.1.5.25.1.3 integer32 read-only
the current fast ethernet ports number supported by the ONU.
                   h3cOnuPOTSPortNumber 1.3.6.1.4.1.2011.10.2.42.1.5.25.1.4 integer32 read-only
The current POTS ports number supported by the ONU
                   h3cOnuE1PortsNumber 1.3.6.1.4.1.2011.10.2.42.1.5.25.1.5 integer32 read-only
The current E1 ports number supported by the ONU.
                   h3cOnuUpstreamQueueNumber 1.3.6.1.4.1.2011.10.2.42.1.5.25.1.6 integer32 read-only
The number of upstream queues supported by the ONU.
                   h3cOnuMaxUpstreamQueuePerPort 1.3.6.1.4.1.2011.10.2.42.1.5.25.1.7 integer32 read-only
The number of maximum upstream queues per port of the ONU.
                   h3cOnuDownstreamQueueNumber 1.3.6.1.4.1.2011.10.2.42.1.5.25.1.8 integer32 read-only
The number of downstream queues supported by the ONU.
                   h3cOnuMaxDownstreamQueuePerPort 1.3.6.1.4.1.2011.10.2.42.1.5.25.1.9 integer32 read-only
The number of maximum downstream queues per port of the ONU.
                   h3cOnuBatteryBackup 1.3.6.1.4.1.2011.10.2.42.1.5.25.1.10 truthvalue read-only
true(1) - ONU supports a reserve battery. false(2) - ONU does not support a reserve battery.
                   h3cOnuIgspFastLeaveSupported 1.3.6.1.4.1.2011.10.2.42.1.5.25.1.11 truthvalue read-only
true(1) - ONU supports fast leave in igsp mode. false(2) - ONU does not support fast leave in igsp mode.
                   h3cOnuMCtrlFastLeaveSupported 1.3.6.1.4.1.2011.10.2.42.1.5.25.1.12 truthvalue read-only
true(1) - ONU supports fast leave in multicast control mode. false(2) - ONU does not support fast leave in multicast control mode.
         h3cOnuDbaReportTable 1.3.6.1.4.1.2011.10.2.42.1.5.26 no-access
This table defines the information of DBA(dynamic bandwidth allocation) report threshold contained in the MPCP report frames.
               h3cOnuDbaReportEntry 1.3.6.1.4.1.2011.10.2.42.1.5.26.1 no-access
The entry of the table h3cOnuDbaReportTable.
                   h3cOnuDbaReportQueueId 1.3.6.1.4.1.2011.10.2.42.1.5.26.1.1 integer32 no-access
The DBA report queue ID.
                   h3cOnuDbaReportThreshold 1.3.6.1.4.1.2011.10.2.42.1.5.26.1.2 integer32 read-write
The threshold of the DBA report queue. the following is the queue ID and the related default threshold setting. 1 - 0 2 - 0 3 - 0 4 - 65535 5 - 65535 6 - 0 7 - 0 8 - 0
                   h3cOnuDbaReportStatus 1.3.6.1.4.1.2011.10.2.42.1.5.26.1.3 integer read-write
enable -threshold configuration is active for the queue. disable -threshold configuration is not active for the queue. Enumeration: 'enable': 1, 'disable': 2.
         h3cOnuCosToLocalPrecedenceTable 1.3.6.1.4.1.2011.10.2.42.1.5.27 no-access
Table of map of the COS to local-precedence.
               h3cOnuCosToLocalPrecedenceEntry 1.3.6.1.4.1.2011.10.2.42.1.5.27.1 no-access
Configuration information of map of the COS to local precedence.
                   h3cOnuCosToLocalPrecedenceCosIndex 1.3.6.1.4.1.2011.10.2.42.1.5.27.1.1 integer32 read-only
Index of the map, obtains from packet cos value.
                   h3cOnuCosToLocalPrecedenceValue 1.3.6.1.4.1.2011.10.2.42.1.5.27.1.2 integer32 read-write
Value of local precedence.
         h3cEponOnuStpPortTable 1.3.6.1.4.1.2011.10.2.42.1.5.28 no-access
Table of ONU STP ports.
               h3cEponOnuStpPortEntry 1.3.6.1.4.1.2011.10.2.42.1.5.28.1 no-access
Configuration information of ONU STP ports.
                   h3cEponStpPortIndex 1.3.6.1.4.1.2011.10.2.42.1.5.28.1.1 integer32 no-access
The index of the STP ports.
                   h3cEponStpPortDescr 1.3.6.1.4.1.2011.10.2.42.1.5.28.1.2 octet string no-access
The description of the STP ports.
                   h3cEponStpPortState 1.3.6.1.4.1.2011.10.2.42.1.5.28.1.3 integer no-access
The current state of the port (i.e. disabled, discarding, learning and forwarding). Enumeration: 'disabled': 1, 'discarding': 2, 'forwarding': 4, 'learning': 3.
         h3cOnuPhysicalTable 1.3.6.1.4.1.2011.10.2.42.1.5.29 no-access
This table is used for getting ONU physical information.
               h3cOnuPhysicalEntry 1.3.6.1.4.1.2011.10.2.42.1.5.29.1 no-access
The entry of the h3cOnuPhysicalTable.
                   h3cOnuBridgeMac 1.3.6.1.4.1.2011.10.2.42.1.5.29.1.1 macaddress read-only
The bridge MAC address of ONU.
                   h3cOnuFirstPonMac 1.3.6.1.4.1.2011.10.2.42.1.5.29.1.2 macaddress read-only
The MAC address of ONU first PON port.
                   h3cOnuFirstPonRegState 1.3.6.1.4.1.2011.10.2.42.1.5.29.1.3 integer read-only
The register state of ONU first PON port. Enumeration: 'absent': 2, 'silent': 4, 'notExist': 1, 'up': 6, 'down': 5, 'offline': 3.
                   h3cOnuSecondPonMac 1.3.6.1.4.1.2011.10.2.42.1.5.29.1.4 macaddress read-only
The MAC address of ONU second PON port.
                   h3cOnuSecondPonRegState 1.3.6.1.4.1.2011.10.2.42.1.5.29.1.5 integer read-only
The register state of ONU second PON port. Enumeration: 'absent': 2, 'silent': 4, 'notExist': 1, 'up': 6, 'down': 5, 'offline': 3.
         h3cOnuSmlkTable 1.3.6.1.4.1.2011.10.2.42.1.5.30 no-access
This table is used for getting ONU SMLK information.
               h3cOnuSmlkEntry 1.3.6.1.4.1.2011.10.2.42.1.5.30.1 no-access
The entry of the h3cOnuSmlkTable.
                   h3cOnuSmlkGroupID 1.3.6.1.4.1.2011.10.2.42.1.5.30.1.1 integer32 read-only
The SMLK group ID of ONU.
                   h3cOnuSmlkFirstPonRole 1.3.6.1.4.1.2011.10.2.42.1.5.30.1.2 integer read-only
The role of ONU first PON port in a SMLK group. Enumeration: 'slave': 2, 'null': 3, 'master': 1.
                   h3cOnuSmlkFirstPonStatus 1.3.6.1.4.1.2011.10.2.42.1.5.30.1.3 integer read-only
The transmitting status of ONU first PON port in a SMLK group. Enumeration: 'active': 1, 'standby': 2, 'null': 4, 'down': 3.
                   h3cOnuSmlkSecondPonRole 1.3.6.1.4.1.2011.10.2.42.1.5.30.1.4 integer read-only
The role of ONU second PON port in a SMLK group. Enumeration: 'slave': 2, 'null': 3, 'master': 1.
                   h3cOnuSmlkSecondPonStatus 1.3.6.1.4.1.2011.10.2.42.1.5.30.1.5 integer read-only
The transmitting status of ONU second PON port in a SMLK group. Enumeration: 'active': 1, 'standby': 2, 'null': 4, 'down': 3.
         h3cOnuRS485PropertiesTable 1.3.6.1.4.1.2011.10.2.42.1.5.31 no-access
Property table.
               h3cOnuRS485PropertiesEntry 1.3.6.1.4.1.2011.10.2.42.1.5.31.1 no-access
The entry of property table.
                   h3cOnuRS485SerialIndex 1.3.6.1.4.1.2011.10.2.42.1.5.31.1.1 integer32 no-access
The index of serial port.
                   h3cOnuRS485BaudRate 1.3.6.1.4.1.2011.10.2.42.1.5.31.1.2 integer read-write
The port baud rate. Enumeration: 'baudRate600': 2, 'baudRate38400': 8, 'baudRate115200': 10, 'baudRate19200': 7, 'baudRate9600': 6, 'baudRate57600': 9, 'baudRate4800': 5, 'baudRate1200': 3, 'baudRate2400': 4, 'baudRate300': 1.
                   h3cOnuRS485DataBits 1.3.6.1.4.1.2011.10.2.42.1.5.31.1.3 integer read-write
The port number of data bits in a character. Enumeration: 'eight': 4, 'seven': 3, 'six': 2, 'five': 1.
                   h3cOnuRS485Parity 1.3.6.1.4.1.2011.10.2.42.1.5.31.1.4 integer read-write
The port sense of a character parity bit. Enumeration: 'even': 3, 'none': 1, 'space': 5, 'odd': 2, 'mark': 4.
                   h3cOnuRS485StopBits 1.3.6.1.4.1.2011.10.2.42.1.5.31.1.5 integer read-write
The port number of stop bits. Enumeration: 'two': 2, 'oneAndHalf': 3, 'one': 1.
                   h3cOnuRS485FlowControl 1.3.6.1.4.1.2011.10.2.42.1.5.31.1.6 integer read-write
The port type of input flow control. 'none' indicates no flow control at this level. 'hardware' indicates using hardware signals. 'xonOrxoff' indicates using software function. Enumeration: 'hardware': 2, 'none': 1, 'xonOrxoff': 3.
                   h3cOnuRS485TXOctets 1.3.6.1.4.1.2011.10.2.42.1.5.31.1.7 integer32 read-only
The number of output octets about the port. The unit is byte.
                   h3cOnuRS485RXOctets 1.3.6.1.4.1.2011.10.2.42.1.5.31.1.8 integer32 read-only
The number of input octets about the port. The unit is byte.
                   h3cOnuRS485TXErrOctets 1.3.6.1.4.1.2011.10.2.42.1.5.31.1.9 integer32 read-only
The number of output error octets about the port. The unit is byte.
                   h3cOnuRS485RXErrOctets 1.3.6.1.4.1.2011.10.2.42.1.5.31.1.10 integer32 read-only
The number of input error octets about the port. The unit is byte.
                   h3cOnuRS485ResetStatistics 1.3.6.1.4.1.2011.10.2.42.1.5.31.1.11 integer read-write
Reset the counters to zero, including h3cOnuRS485TXOctets, h3cOnuRS485RXOctets, h3cOnuRS485TXErrOctets and h3cOnuRS485RXErrOctets. Enumeration: 'clear': 2, 'counting': 1.
         h3cOnuRS485SessionSummaryTable 1.3.6.1.4.1.2011.10.2.42.1.5.32 no-access
Session summary table.
               h3cOnuRS485SessionSummaryEntry 1.3.6.1.4.1.2011.10.2.42.1.5.32.1 no-access
The entry of session summary table.
                   h3cOnuRS485SessionMaxNum 1.3.6.1.4.1.2011.10.2.42.1.5.32.1.1 integer32 read-only
The max session number of every serial port which can be supported.
                   h3cOnuRS485SessionNextIndex 1.3.6.1.4.1.2011.10.2.42.1.5.32.1.2 integer32 read-only
The next valid index used for creating a new session raw. When there is no valid index left, it will return 0.
         h3cOnuRS485SessionTable 1.3.6.1.4.1.2011.10.2.42.1.5.33 no-access
RS485 raw session table. Data received from RS485 will be sent to the destination by raw sockets.
               h3cOnuRS485SessionEntry 1.3.6.1.4.1.2011.10.2.42.1.5.33.1 no-access
The entry of session table.
                   h3cOnuRS485SessionIndex 1.3.6.1.4.1.2011.10.2.42.1.5.33.1.1 integer32 no-access
Raw session index.
                   h3cOnuRS485SessionType 1.3.6.1.4.1.2011.10.2.42.1.5.33.1.2 integer read-only
The type of a session. A session can use UDP socket, TCP socket as a client, or TCP socket as a server. Enumeration: 'tcpClient': 2, 'udp': 1, 'tcpServer': 3.
                   h3cOnuRS485SessionAddType 1.3.6.1.4.1.2011.10.2.42.1.5.33.1.3 inetaddresstype read-only
This object indicates the transport type of the address contained in h3cOnuRS485SessionRemoteIP object.
                   h3cOnuRS485SessionRemoteIP 1.3.6.1.4.1.2011.10.2.42.1.5.33.1.4 inetaddress read-only
The IP of remote landing. When session type is 'udp', this is the peer IP. When session type is 'tcpClient', this is the server IP. When session type is 'tcpServer', this is invalid.
                   h3cOnuRS485SessionRemotePort 1.3.6.1.4.1.2011.10.2.42.1.5.33.1.5 integer32 read-only
The port of remote landing. When session type is 'udp', this is the peer port. When session type is 'tcpClient', this is the server port. When session type is 'tcpServer', this is invalid.
                   h3cOnuRS485SessionLocalPort 1.3.6.1.4.1.2011.10.2.42.1.5.33.1.6 integer32 read-only
Local socket port. When session type is 'udp', this is local UDP socket port. When session type is 'tcpClient', this is invalid. When session type is 'tcpServer', this is the local port which will be listened.
                   h3cOnuRS485SessionRowStatus 1.3.6.1.4.1.2011.10.2.42.1.5.33.1.7 rowstatus read-only
The status used for creating, modifying, and deleting instances of the columnar objects in raw session table.
         h3cOnuRS485SessionErrInfoTable 1.3.6.1.4.1.2011.10.2.42.1.5.34 no-access
Error information table. When failed to create a session, error information can be got from this table.
               h3cOnuRS485SessionErrInfoEntry 1.3.6.1.4.1.2011.10.2.42.1.5.34.1 no-access
The entry of error information table.
                   h3cOnuRS485SessionErrInfo 1.3.6.1.4.1.2011.10.2.42.1.5.34.1.1 displaystring read-only
Error information string. When a response with 'noCreeation' for row creation in table h3cOnuRS485SessionTable, the error reason can be got from this object.
     h3cEponBatchOperationMan 1.3.6.1.4.1.2011.10.2.42.1.6
         h3cEponBatchOperationBySlotTable 1.3.6.1.4.1.2011.10.2.42.1.6.1 no-access
This table is used for batch operation by slot.
             h3cEponBatchOperationBySlotEntry 1.3.6.1.4.1.2011.10.2.42.1.6.1.1 no-access
The entry of the h3cEponBatchOperationBySlotTable.
                 h3cEponBatchOperationBySlotIndex 1.3.6.1.4.1.2011.10.2.42.1.6.1.1.1 integer32 no-access
The EPON board index.
                 h3cEponBatchOperationBySlotType 1.3.6.1.4.1.2011.10.2.42.1.6.1.1.2 integer read-write
The types of batch operation by slot: 1 - resetUnknown, the object value is not set. 9 - updateDba, update OLT DBA algorithm. Config the MIB object module h3cEponDbaUpdateFileName. 10 - updateONU, update ONU firmware. Config the MIB object module h3cEponOnuUpdateFileName with the filename of ONU firmware first. Enumeration: 'updateONU': 10, 'resetUnknown': 1, 'updateDba': 9.
                 h3cEponBatchOperationBySlot 1.3.6.1.4.1.2011.10.2.42.1.6.1.1.3 integer read-write
Execute batch operation. Enumeration: 'batOpBySlot': 1.
                 h3cEponBatchOperationBySlotResult 1.3.6.1.4.1.2011.10.2.42.1.6.1.1.4 integer32 read-only
The result of batch operation. 0xFFFF - other, general error. 1 - working, operation is not completed. 2 - successful, completed successfully. 3 - failed because the DBA source file does not exist. 4 - failed because the ONU firmware file does not exist. 5 - failed because of not set the filename of DBA source. 6 - failed because of not set the filename of ONU firmware. 7 - failed because of not set slottype.
         h3cEponBatchOperationByOLTTable 1.3.6.1.4.1.2011.10.2.42.1.6.2 no-access
This table is used for batch operation by OLT.
             h3cEponBatchOperationByOLTEntry 1.3.6.1.4.1.2011.10.2.42.1.6.2.1 no-access
The entry of the h3cEponBatchOperationByOLTTable.
                 h3cEponBatchOperationByOLTType 1.3.6.1.4.1.2011.10.2.42.1.6.2.1.1 integer read-write
The types of batch operation by OLT(operation for all ONUs in the OLT): 1 -- resetUnknown, the object value is not set. 5 -- updateONU, update ONU firmware. configure the MIB object module h3cEponOnuUpdateFileName with the filename of ONU firmware first. Enumeration: 'updateONU': 5, 'resetUnknown': 1.
                 h3cEponBatchOperationByOLT 1.3.6.1.4.1.2011.10.2.42.1.6.2.1.2 integer read-write
Execute batch operation. Enumeration: 'batOpByOlt': 1.
                 h3cEponBatchOperationByOLTResult 1.3.6.1.4.1.2011.10.2.42.1.6.2.1.3 integer32 read-only
The result of batch operation: 0xFFFF -- other, gernal error. 1 -- working, operation is not completed. 2 -- successful, operation completed successfully. 4 -- failed because the ONU firmware file does not exist. 6 -- failed because of not set the filename of ONU firmware. 7 -- failed because of not set olttype.
         h3cOnuFirmwareUpdateByTypeTable 1.3.6.1.4.1.2011.10.2.42.1.6.3 no-access
This table is used to update ONU by ONU type.
             h3cOnuFirmwareUpdateByTypeEntry 1.3.6.1.4.1.2011.10.2.42.1.6.3.1 no-access
The entry of the h3cOnuFirmwareUpdateByTypeTable.
                 h3cOnuUpdateByOnuTypeIndex 1.3.6.1.4.1.2011.10.2.42.1.6.3.1.1 integer32 no-access
The type and file relationship table entry index.
                 h3cOnuUpdateByTypeOnuType 1.3.6.1.4.1.2011.10.2.42.1.6.3.1.2 octet string read-only
The type of ONUs.
                 h3cOnuUpdateByTypeFileName 1.3.6.1.4.1.2011.10.2.42.1.6.3.1.3 octet string read-only
The file to be updated for the type of ONUs.
                 h3cOnuUpdateByTypeRowStatus 1.3.6.1.4.1.2011.10.2.42.1.6.3.1.4 rowstatus read-only
The status of this table entry. Only createAndGo and destroy actions are supported.
     h3cEponErrorInfo 1.3.6.1.4.1.2011.10.2.42.1.7
         h3cEponSoftwareErrorCode 1.3.6.1.4.1.2011.10.2.42.1.7.1 integer32 no-access
OLT software error code.
         h3cOamVendorSpecificAlarmCode 1.3.6.1.4.1.2011.10.2.42.1.7.2 integer32 no-access
Alarm code of the vendor.
         h3cEponOnuRegErrorMacAddr 1.3.6.1.4.1.2011.10.2.42.1.7.3 octet string no-access
The MAC of ONU registered error.
         h3cOamEventLogType 1.3.6.1.4.1.2011.10.2.42.1.7.4 unsigned32 no-access
The type of event that generated this entry in the event log.
         h3cOamEventLogLocation 1.3.6.1.4.1.2011.10.2.42.1.7.5 integer no-access
Whether this event occurred locally, or was received from the OAM peer via Ethernet OAM. Enumeration: 'remote': 2, 'local': 1.
         h3cEponLoopbackPortIndex 1.3.6.1.4.1.2011.10.2.42.1.7.6 integer32 no-access
The index of port which generate loop back event.
         h3cEponLoopbackPortDescr 1.3.6.1.4.1.2011.10.2.42.1.7.7 octet string no-access
A textual string containing information about the port generated loop back event.
         h3cOltPortAlarmLlidMisFrames 1.3.6.1.4.1.2011.10.2.42.1.7.8 unsigned32 no-access
the amount of mismatched frames about the LLID mismatch alarm.
         h3cOltPortAlarmBer 1.3.6.1.4.1.2011.10.2.42.1.7.9 unsigned32 no-access
error bit rate.
         h3cOltPortAlarmFer 1.3.6.1.4.1.2011.10.2.42.1.7.10 unsigned32 no-access
error frames rate.
         h3cEponOnuRegSilentMac 1.3.6.1.4.1.2011.10.2.42.1.7.11 octet string no-access
The MAC of silent ONU.
         h3cEponOperationResult 1.3.6.1.4.1.2011.10.2.42.1.7.12 octet string no-access
The result of EPON operation.
         h3cEponOnuLaserState 1.3.6.1.4.1.2011.10.2.42.1.7.13 integer no-access
The state of ONU laser. Enumeration: 'signalDegradation': 3, 'endOfLife': 4, 'laserAlwaysOn': 2, 'normal': 1.
     h3cEponTrap 1.3.6.1.4.1.2011.10.2.42.1.8
         h3cEponTrapPrefix 1.3.6.1.4.1.2011.10.2.42.1.8.0
             h3cEponPortAlarmBerTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.1
A h3cEponPortAlarmBerTrap notification is sent when a BER threshold crossing event is detected.
             h3cEponPortAlarmFerTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.2
A h3cEponPortAlarmFerTrap notification is sent when a frame error rate threshold crossing event is detected.
             h3cEponErrorLLIDFrameTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.3
A h3cEponErrorLLIDFrameTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected.
             h3cEponLoopBackEnableTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.4
A h3cEponLoopBackEnableTrap notification is sent when the loop back command is committed.
             h3cEponOnuRegistrationErrTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.5
A h3cEponOnuRegistrationErrTrap notification is sent when a ONU register failed.
             h3cEponOamDisconnectionTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.6
A h3cEponOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected.
             h3cEponEncryptionKeyErrTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.7
A h3cEponEncryptionKeyErrTrap notification is sent when LLID's encryption key is bad.
             h3cEponRemoteStableTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.8
A h3cEponRemoteStableTrap notification is sent when remote Data Terminal Equipment(DTE) has not seen or is unsatisfied with local state information.
             h3cEponLocalStableTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.9
A h3cEponLocalStableTrap notification is sent when DTE has not seen or is unsatisfied with remote state information.
             h3cEponOamVendorSpecificTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.10
A h3cEponOamVendorSpecificTrap notification is sent when system vendor specific OAM alarm raised.
             h3cEponSoftwareErrTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.11
A h3cEponSoftwareErrTrap notification is sent when a PAS-SOFT internal error occurs.
             h3cEponPortAlarmBerRecoverTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.12
A h3cEponPortAlarmBerRecoverTrap notification is sent when a BER threshold crossing event is detected and then recovered.
             h3cEponPortAlarmFerRecoverTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.13
A h3cEponPortAlarmFerRecoverTrap notification is sent when a frame error rate threshold crossing event is detected and then recoverd.
             h3cEponErrorLLIDFrameRecoverTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.14
A h3cEponErrorLLIDFrameRecoverTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected and then recoverd.
             h3cEponLoopBackEnableRecoverTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.15
A h3cEponLoopBackEnableRecoverTrap notification is sent when the loop back is detected and then recoverd.
             h3cEponOnuRegistrationErrRecoverTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.16
A h3cEponOnuRegistrationErrRecoverTrap notification is sent when an ONU register failed and then register successful again.
             h3cEponOamDisconnectionRecoverTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.17
A h3cEponOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected.
             h3cEponEncryptionKeyErrRecoverTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.18
A h3cEponEncryptionKeyErrRecoverTrap notification is sent when LLID's encryption key is bad and then right.
             h3cEponRemoteStableRecoverTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.19
A h3cEponRemoteStableRecoverTrap notification is sent when remote DTE has not seen or is unsatisfied with local state information and then is realized.
             h3cEponLocalStableRecoverTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.20
A h3cEponLocalStableRecoverTrap notification is sent when DTE has not seen or is unsatisfied with remote state information and then is realized.
             h3cEponOamVendorSpecificRecoverTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.21
A h3cEponOamVendorSpecificRecoverTrap notification is sent when system vendor specific OAM alarm is detected and then recovered.
             h3cEponSoftwareErrRecoverTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.22
A h3cEponSoftwareErrRecoverTrap notification is sent when a PAS-SOFT internal error is detected and then recovered.
             h3cDot3OamThresholdRecoverEvent 1.3.6.1.4.1.2011.10.2.42.1.8.0.23
A h3cDot3OamThresholdRecoverEvent notification is sent when h3cDot3OamThresholdEvent is detected and then recoverd.
             h3cDot3OamNonThresholdRecoverEvent 1.3.6.1.4.1.2011.10.2.42.1.8.0.24
A h3cDot3OamNonThresholdRecoverEvent notification is sent when h3cDot3OamNonThresholdEvent is detected and then recoverd.
             h3cEponOnuRegExcessTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.25
A h3cEponOnuRegExcessTrap notification is sent when the number of registered ONUs exceeds the limit.
             h3cEponOnuRegExcessRecoverTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.26
A h3cEponOnuRegExcessRecoverTrap notification is sent when h3cEponOnuRegExcessTrap is detected and then recoverd.
             h3cEponOnuPowerOffTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.27
A h3cEponOnuPowerOffTrap notification is sent when ONU is power off.
             h3cEponOltSwitchoverTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.28
A h3cEponOltSwithoverTrap notification is sent when OLT switchover is detected.
             h3cEponOltDFETrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.29
A h3cEponOltDFETrap notification is sent when there was a serious problem(device fatal error) on OLT.
             h3cEponOltDFERecoverTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.30
A h3cEponOltDFERecoverTrap notification is sent when device fatal error is detected and then recoverd.
             h3cEponOnuSilenceTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.31
The h3cEponOnuSilenceTrap notification is sent when an unbound ONU try to register to an OLT.
             h3cEponOnuSilenceRecoverTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.32
The h3cEponOnuSilenceRecoverTrap notification is sent when a silent ONU is bound in the OLT or the aging onu mac address is timeout.
             h3cEponOnuUpdateResultTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.33
A h3cEponUpdateResultTrap notification is sent when an ONU reported its firmware update result.
             h3cEponOnuAutoBindTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.34
A h3cEponOnuAutoBindTrap notification is sent when a silent ONU is bound automatically.
             h3cEponOnuPortStpStateTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.35
A h3cEponOnuPortStpStateTrap notification is sent when a port turns into another state in STP environment.
             h3cEponOnuLaserFailedTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.36
A h3cEponOnuLaserFailedTrap notification is sent when an ONU has trouble with laser, such as laser constantly turned on, signal degradation or optics EOL (End of Life).
             h3cOnuSmlkSwitchoverTrap 1.3.6.1.4.1.2011.10.2.42.1.8.0.37
A h3cOnuSmlkSwitchoverTrap notification is sent when an ONU SMLK switchover is detected.
     h3cEponStat 1.3.6.1.4.1.2011.10.2.42.1.9
         h3cEponStatTable 1.3.6.1.4.1.2011.10.2.42.1.9.1 no-access
This table contains line code error statistics of epon port.
             h3cEponStatEntry 1.3.6.1.4.1.2011.10.2.42.1.9.1.1 no-access
The entry of h3cEponStatTable.
                 h3cEponStatFER 1.3.6.1.4.1.2011.10.2.42.1.9.1.1.1 counter64 read-only
The frame error rate of epon port, measured in 1e-9 unit.
                 h3cEponStatBER 1.3.6.1.4.1.2011.10.2.42.1.9.1.1.2 counter64 read-only
The bit error rate of epon port, measured in 1e-9 unit.