H3C-DSP-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: H3C-DSP-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 h3cDSP 1.3.6.1.4.1.2011.10.2.89
This MIB is to provide the definition of the DSP(Digital Signal Processing) status.
       h3cVPMStatusTable 1.3.6.1.4.1.2011.10.2.89.1 no-access
The table contains status parameters of VPM(Voice Process Module) card.
           h3cVPMStatusEntry 1.3.6.1.4.1.2011.10.2.89.1.1 no-access
The entry of VPM status table.
               h3cVPMIndex 1.3.6.1.4.1.2011.10.2.89.1.1.1 integer32 no-access
The index for this entry. The sequence of VPM card in the chassis is from the top to bottom.
               h3cVPMEnPhysicalIndex 1.3.6.1.4.1.2011.10.2.89.1.1.2 physicalindex read-only
The object corresponds to PhysicalIndex in the chassis.
               h3cVPMState 1.3.6.1.4.1.2011.10.2.89.1.1.3 integer read-only
The object indicates the current state of VPM card being monitored. normal(1) - VPM card in normal condition. warning(2) - VPM card has some problem and need attention. fatal(3) - VPM card is not functional. offLine(4) - VPM card is in off-line maintenance state. Enumeration: 'fatal': 3, 'offLine': 4, 'warning': 2, 'normal': 1.
               h3cVPMResourceUtilization 1.3.6.1.4.1.2011.10.2.89.1.1.4 integer32 read-only
The object indicates the percentage of current DSP resource utilization of the VPM card. The utilization is a ratio of number of busy DSP resources (for handling calls, transcoding, voice compression,...) to the total available DSP resources.
               h3cVPMHiWaterUtilization 1.3.6.1.4.1.2011.10.2.89.1.1.5 integer32 read-only
The object indicates the highest percentage of DSP resource utilization of the VPM card that have been occured.
               h3cVPMMaxChannel 1.3.6.1.4.1.2011.10.2.89.1.1.6 integer32 read-only
The maximum number of channels can be supported in each VPM card.
       h3cDSPStatusTable 1.3.6.1.4.1.2011.10.2.89.2 no-access
The table contains status parameters of DSP(Digital Signal Processing) card.
           h3cDSPStatusEntry 1.3.6.1.4.1.2011.10.2.89.2.1 no-access
The entry of DSP status table.
               h3cDSPIndex 1.3.6.1.4.1.2011.10.2.89.2.1.1 integer32 no-access
The index for this entry. DSP is fixed on VPM card or chassis card. The sequence of DSP in the VPM card or chassis card is from right to left.
               h3cDSPVPMIndex 1.3.6.1.4.1.2011.10.2.89.2.1.2 integer32 read-only
The object corresponds to VPMIndex in the chassis. If value of this object is non-zero, it is the index of VPM card.(DSP is in this VPM card.) If value of this object is 0, then the DSP is fixed in the chassis card.
               h3cDSPEnPhysicalIndex 1.3.6.1.4.1.2011.10.2.89.2.1.3 physicalindex read-only
The object corresponds to PhysicalIndex in the chassis.
               h3cDSPResetTime 1.3.6.1.4.1.2011.10.2.89.2.1.4 timeticks read-only
The value of sysUpTime from the last DSP reset occurred.
               h3cDSPMaxChannel 1.3.6.1.4.1.2011.10.2.89.2.1.5 integer32 read-only
The maximum number of channels can be supported in each DSP. The value is chosen in an implementation-dependent manner by the DSP functionality.
               h3cDSPState 1.3.6.1.4.1.2011.10.2.89.2.1.6 integer read-only
The object indicates the current state of DSP being monitored. normal(1) - DSP in normal condition. fatal(3) - DSP is not functional. offLine(4) - DSP is in off-line maintenance state. Enumeration: 'offLine': 4, 'fatal': 3, 'normal': 1.
               h3cDSPInUseChannel 1.3.6.1.4.1.2011.10.2.89.2.1.7 integer32 read-only
The number of channels that are reserved for serving calls. The value is incremented when the DSP channel is reserved for call setup and is decremented after the DSP channel is free due to call disconnection.
       h3cDSPTrap 1.3.6.1.4.1.2011.10.2.89.3
           h3cDSPTrapPrex 1.3.6.1.4.1.2011.10.2.89.3.0
               h3cVPMStateChange 1.3.6.1.4.1.2011.10.2.89.3.0.1
This trap is sent when VPM state changes.
               h3cDSPStateChange 1.3.6.1.4.1.2011.10.2.89.3.0.2
This trap is sent when DSP state changes.