GMPLS-LSR-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: GMPLS-LSR-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, GMPLS-TC-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 gmplsLsrMIB 1.3.6.1.3.1
This MIB contains managed object definitions for the Generalized Multiprotocol Label Switching (GMPLS) Router.
     gmplsLsrObjects 1.3.6.1.3.1.1
         gmplsInterfaceConfTable 1.3.6.1.3.1.1.1 no-access
This table specifies per-interface GMPLS capability and associated information. It extends the information in mplsInterfaceConfTable.
             gmplsInterfaceConfEntry 1.3.6.1.3.1.1.1.1 no-access
An entry in this table is created by an LSR for every interface capable of supporting GMPLS. Each entry in this table will exist only if corresponding entries in mplsInterfaceConfTable and ifTable exists. If the associated entry in mplsInterfaceConfTabel or ifTable is deleted, the corresponding entry in this table must also be deleted shortly thereafter. The indexing is the same as that for mplsInterfaceConfTabel. Thus, the entry with index 0 represents the per-platform label space and contains parameters that apply to all interfaces that participate in the per-platform label space.
                 gmplsInterfaceConfSignalingCaps 1.3.6.1.3.1.1.1.1.1 bits read-only
Defines the signaling capabilities on this interface. Multiple bits may legitimately be set at once. Setting no bits implies that GMPLS signaling cannot be performed on this interface and all LSPs must be manually provisioned. Bits: 'rsvp-gmpls': 1, 'crldp-gmpls': 2, 'other-gmpls': 3.
         gmplsInSegmentTable 1.3.6.1.3.1.1.2 no-access
This table extends the mplsInSegmentTable to provide GMPLS-specific information about incoming segments to an LSR.
             gmplsInSegmentEntry 1.3.6.1.3.1.1.2.1 no-access
An entry in this table extends the representation of an incoming segment represented by an entry in mplsInSegmentTable. An entry can be created by a network administrator or an SNMP agent, or a GMPLS signaling protocol.
                 gmplsInSegmentDirection 1.3.6.1.3.1.1.2.1.1 gmplssegmentdirection read-only
This variable indicates the direction of data flow on this segment.
         gmplsOutSegmentTable 1.3.6.1.3.1.1.3 no-access
This table extends the mplsOutSegmentTable to provide GMPLS-specific information about outgoing segments from an LSR.
             gmplsOutSegmentEntry 1.3.6.1.3.1.1.3.1 no-access
An entry in this table extends the representation of an outgoin segment represented by an entry in mplsOutSegmentTable. An entry can be created by a network administrator or an SNMP agent, or a GMPLS signaling protocol.
                 gmplsOutSegmentDirection 1.3.6.1.3.1.1.3.1.1 gmplssegmentdirection read-only
This variable indicates the direction of data flow on this segment. This object cannot be modified if mplsOutSegmentRowStatus for the associated entry in the mplsOutSegmentTavle is active(1).
                 gmplsOutSegmentTTLDecrement 1.3.6.1.3.1.1.3.1.2 unsigned32 read-only
This variable indicates the amount by which to decrement the TTL of any payload packets forwarded on this segment if per-hop decrementing is being done. A value of zero indicates that no decrement should be made or that per-hop decrementing is not in force. See the gmplsTunnelTTLDecrement object in the gmplsTunnelTable of [GMPLSTEMIB] for a value by which to decrement the TTL for the whole of a tunnel. This object cannot be modified if mplsOutSegmentRowStatus for the associated entry in the mplsOutSegmentTavle is active(1).
     gmplsLsrConformance 1.3.6.1.3.1.2
         gmplsLsrGroups 1.3.6.1.3.1.2.1
             gmplsInterfaceGroup 1.3.6.1.3.1.2.1.1
Collection of objects needed for GMPLS interface configuration and performance information.
             gmplsInSegmentGroup 1.3.6.1.3.1.2.1.2
Collection of objects needed to implement a GMPLS in-segment.
             gmplsOutSegmentGroup 1.3.6.1.3.1.2.1.3
Collection of objects needed to implement a GMPLS out-segment.
         gmplsLsrCompliances 1.3.6.1.3.1.2.2
             gmplsLsrModuleCompliance 1.3.6.1.3.1.2.2.1
Compliance statement for agents that support the GMPLS LSR MIB.