GDCSC616-MIB: View SNMP OID List / Download MIB

VENDOR: GENERAL DATACOMM


 Home MIB: GDCSC616-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, GDCMACRO-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 gdc 1.3.6.1.4.1.498
         bql 1.3.6.1.4.1.498.10
               bqlMIBVersion 1.3.6.1.4.1.498.10.1 displaystring read-only
The version number of the MIB, to allow products to know which MIB is being supported. The version number will be x.yzT where x is a major revision (1-9), y is a minor revision(0-9), z is a typo revision (0-9) and T indicates the MIB is still a test revision(A-Z). When a release is complete no T should exist.
               bqlWhatAreYouTable 1.3.6.1.4.1.498.10.2 no-access
The GDC SC616, DC610, DC612, GT 128 What Are You Table.
                   bqlWhatAreYouEntry 1.3.6.1.4.1.498.10.2.1 no-access
An entry in the GDC SC616 What Are You table.
                       bqlWhatAreYouIndex 1.3.6.1.4.1.498.10.2.1.1 scinstance read-only
This object is the identifier of the SC616 What Are You table.
                       bqlBaseCardType 1.3.6.1.4.1.498.10.2.1.2 integer read-only
This function returns the value the Base Card Type. Enumeration: 'sc616': 5, 'gt128': 9, 'gt128NZ': 10, 'dc610': 2, 'dc612': 4.
                       bqlOptionCard 1.3.6.1.4.1.498.10.2.1.3 integer read-only
This indicates whether the option card is installed or not on the DC610 or DC612. Enumeration: 'notInstalled': 1, 'installed': 2.
                       bqlDTE2CardType 1.3.6.1.4.1.498.10.2.1.4 integer read-only
This object is the DTE channel 2 plug-in card type on the DC610 or DC612. Enumeration: 'none': 7, 'eia530': 1, 'x21': 2.
                       bqlDTE1CardType 1.3.6.1.4.1.498.10.2.1.5 integer read-only
This object is the DTE channel 1 plug-in card type on the DC610 or DC612 or GT 128. Enumeration: 'none': 7, 'eia530': 1, 'x21': 2, 'v35': 3.
                       bqlCodeRev 1.3.6.1.4.1.498.10.2.1.6 displaystring read-only
This function returns the firmware code level. Example A- ,B-
                       bqlAlarmStatus 1.3.6.1.4.1.498.10.2.1.7 octet string read-only
The current alarms of the unit without the alarm masks.
               bqlConfigTable 1.3.6.1.4.1.498.10.3 no-access
The GDC SC616, DC610, DC612, GT 128 2B1Q configuration table.
                   bqlConfigEntry 1.3.6.1.4.1.498.10.3.1 no-access
A listing of GDC 2B1Q SC616 options.
                       bqlConfigIndex 1.3.6.1.4.1.498.10.3.1.1 scinstance read-only
A unique index for the Configuration Table.
                       bqlConfigChnlIndex 1.3.6.1.4.1.498.10.3.1.2 integer read-only
A unique channel index for the Configuration Table. Enumeration: 'channel2': 2, 'channel1': 1.
                       bqlTestPattern 1.3.6.1.4.1.498.10.3.1.3 integer read-write
Object to select loop and channel test pattern for SC616, DC610, DC612. Enumeration: 'pattern2047': 1, 'pattern511': 2.
                       bqlRLTimeout 1.3.6.1.4.1.498.10.3.1.4 integer read-write
Object to select loop and channel remote loop time out for DC610 and DC612 only. Enumeration: 'timeoutAfter10Min': 2, 'noTimeout': 1.
                       bqlRespRL 1.3.6.1.4.1.498.10.3.1.5 integer read-write
Object to select loop and channel remote loop response for DC610 and DC612 only. Enumeration: 'enable': 1, 'disable': 2.
                       bqlRLType 1.3.6.1.4.1.498.10.3.1.6 integer read-write
Object to select loop and channel remote loop type for DC610 and DC612 only. Enumeration: 'v54': 1, 'pn127': 2.
                       bqlBilateralRL 1.3.6.1.4.1.498.10.3.1.7 integer read-write
Object to select loop and channel bilateral remote loop for DC610 and DC612 only. Enumeration: 'enable': 1, 'disable': 2.
                       bqlInbandRTSDCD 1.3.6.1.4.1.498.10.3.1.8 integer read-write
Object to select loop and channel in-band RTS/DCD for DC610 and DC612 only. Enumeration: 'enable': 1, 'disable': 2.
                       bqlRTS 1.3.6.1.4.1.498.10.3.1.9 integer read-write
Object to select loop and channel RTS for DC610 and DC612 only. Enumeration: 'force': 2, 'normal': 1.
                       bqlRTSCTSDelay 1.3.6.1.4.1.498.10.3.1.10 integer read-write
Object to select loop and channel RTS/CTS delay for DC610 and DC612 only. Enumeration: 'delay': 2, 'noDelay': 1.
                       bqlAntiStream 1.3.6.1.4.1.498.10.3.1.11 integer read-write
Object to select loop and channel Anti-streaming for DC610 and DC612 only. Enumeration: 'antistream': 2, 'noAntistream': 1.
                       bqlTXDataElasticBufr 1.3.6.1.4.1.498.10.3.1.12 integer read-write
Object to select loop and channel transmit data elastic buffer for DC610 and DC612 only. Enumeration: 'enable': 1, 'disable': 2.
                       bqlRTSCTSDelayTime 1.3.6.1.4.1.498.10.3.1.13 integer read-write
Object to select loop and channel RTS to CTS delay time for DC610 and DC612 only. Enumeration: 'ms60': 13, 'ms65': 14, 'ms45': 10, 'ms5': 2, 'ms40': 9, 'ms0': 1, 'ms75': 16, 'ms10': 3, 'ms55': 12, 'ms70': 15, 'ms15': 4, 'ms30': 7, 'ms25': 6, 'ms35': 8, 'ms50': 11, 'ms20': 5.
                       bqlAntiStreamTime 1.3.6.1.4.1.498.10.3.1.14 integer read-write
Object to select loop and channel anti-streaming time for DC610 and DC612 only. Enumeration: 'seconds25': 6, 'seconds30': 7, 'seconds20': 5, 'seconds35': 8, 'seconds15': 4, 'seconds10': 3, 'seconds5': 2, 'seconds0': 1.
               bqlConfig1Table 1.3.6.1.4.1.498.10.4 no-access
The GDC SC616, DC610, DC612 2B1Q configuration 1 table.
                   bqlConfig1Entry 1.3.6.1.4.1.498.10.4.1 no-access
A listing of GDC 2B1Q SC616 options.
                       bqlConfig1Index 1.3.6.1.4.1.498.10.4.1.1 scinstance read-only
A unique index for the Configuration Table.
                       bqlFrontPanel 1.3.6.1.4.1.498.10.4.1.2 integer read-write
Object used to enable or disable the units front panel switches. Enumeration: 'enable': 1, 'disable': 2.
                       bqlSoftHard 1.3.6.1.4.1.498.10.4.1.3 integer read-only
Object used to read how the unit is configured. Enumeration: 'softmode': 2, 'hardmode': 1.
                       bqlDteStatus 1.3.6.1.4.1.498.10.4.1.4 octet string read-only
Object used to read the status of the DTE interface.
               bqlConfig2Table 1.3.6.1.4.1.498.10.5 no-access
The GDC SC616 2B1Q configuration 2 table.
                   bqlConfig2Entry 1.3.6.1.4.1.498.10.5.1 no-access
A listing of GDC 2B1Q SC616 options.
                       bqlConfig2Index 1.3.6.1.4.1.498.10.5.1.1 scinstance read-only
A unique index for the Configuration Table.
                       bqlMasterTXClkSrc 1.3.6.1.4.1.498.10.5.1.2 integer read-write
Object to option the Loop master transmit clock source. This is for the SC616 only. Enumeration: 'xtc1': 1, 'xtc2': 2.
               bqlDiagnosticTable 1.3.6.1.4.1.498.10.6 no-access
The GDC SC616 diagnostics table.
                   bqlDiagnosticEntry 1.3.6.1.4.1.498.10.6.1 no-access
A listing of GDC SC616 diagnostic tests
                       bqlDiagnosticIndex 1.3.6.1.4.1.498.10.6.1.1 scinstance read-only
A unique index for the Diagnostic Table.
                       bqlDiagnosticChnlIndex 1.3.6.1.4.1.498.10.6.1.2 integer read-only
A unique channel index for the Channel the test will run on. Enumeration: 'channel2': 2, 'channel1': 1.
                       bqlDiagnosticTest 1.3.6.1.4.1.498.10.6.1.3 integer read-write
This function selects or reads the test. 0 = no test currently operating 1 = remote loopback test 2 = channel loopback test 4 = data loopback test 8 = selftest 16 = line loopback test 32 = terminate test All other values are test combinations such as 9 = selftest and remote loopback.
                       bqlDiagnosticLength 1.3.6.1.4.1.498.10.6.1.4 integer read-write
This function selects the test time length. Where 0 is test indefinitely and 1 to 127 are seconds.
                       bqlDiagnosticActive 1.3.6.1.4.1.498.10.6.1.5 integer read-only
This function represents the test condition. Enumeration: 'notActive': 1, 'active': 2.
                       bqlDiagnosticResults 1.3.6.1.4.1.498.10.6.1.6 integer read-only
This function reads the self test results in bit errors.
               bqlSC616Alarm 1.3.6.1.4.1.498.10.7
                   bqlAlarmData 1.3.6.1.4.1.498.10.7.1
                       bqlNoResponseAlm 1.3.6.1.4.1.498.10.7.1.1
                       bqlDiagRxErrAlm 1.3.6.1.4.1.498.10.7.1.2
                       bqlPowerUpAlm 1.3.6.1.4.1.498.10.7.1.3
                       bqlLp2B1QOutofSyncAlm 1.3.6.1.4.1.498.10.7.1.4
                       bqlLpChn1ElasBufrOverUnderFlowAlm 1.3.6.1.4.1.498.10.7.1.5
                       bqlLpChn2ElasBufrOverUnderFlowAlm 1.3.6.1.4.1.498.10.7.1.6
                       bqlLpChn1ExtTxClkAlm 1.3.6.1.4.1.498.10.7.1.7
                       bqlLpChn2ExtTxClkAlm 1.3.6.1.4.1.498.10.7.1.8
                       bqlLpSealingCurrentNoContinuityAlm 1.3.6.1.4.1.498.10.7.1.9
               bqlSC616LEDStatusTable 1.3.6.1.4.1.498.10.8 no-access
The GDC SC616 LED Status Table.
                   bqlSC616LEDEntry 1.3.6.1.4.1.498.10.8.1 no-access
An entry in the GDC SC616 LED Status table.
                       bqlSC616LEDIndex 1.3.6.1.4.1.498.10.8.1.1 scinstance read-only
This object is the index of the SC616 LED Status table.
                       bqlSC616LEDStatus 1.3.6.1.4.1.498.10.8.1.2 octet string read-only
The GDC SC616 front panel LED Status. A value of 1 means on, 0 is off. byte 1 bit 7 (1.7) - not used 1.6 - test mode 1.5 - alarm on 1.4 - loop 1 line loopback 1.3 - loop 1 channel 1 send data transitions 1.2 - loop 1 channel 1 receive data transitions 1.1 - loop 1 channel 2 send data transitions 1.0 - loop 1 channel 2 receive data transitions 2.7 - not used 2.6 - not used 2.5 - not used 2.4 - loop 2 line loopback 2.3 - loop 2 channel 1 send data transitions 2.2 - loop 2 channel 1 receive data transitions 2.1 - loop 2 channel 2 send data transitions 2.0 - loop 2 channel 2 receive data transitions 3.7 - not used 3.6 - not used 3.5 - not used 3.4 - loop 3 line loopback 3.3 - loop 3 channel 1 send data transitions 3.2 - loop 3 channel 1 receive data transitions 3.1 - loop 3 channel 2 send data transitions 3.0 - loop 3 channel 2 receive data transitions
               bqlDC610Alarm 1.3.6.1.4.1.498.10.9
                   bqlDC610AlarmData 1.3.6.1.4.1.498.10.9.1
                       bqlDC610PowerUpAlm 1.3.6.1.4.1.498.10.9.1.1
                       bqlDC610Chnl1DTRAlm 1.3.6.1.4.1.498.10.9.1.2
                       bqlDC610NoResponseAlm 1.3.6.1.4.1.498.10.9.1.3
                       bqlDC610DiagRxErrAlm 1.3.6.1.4.1.498.10.9.1.4
               bqlDC610LEDStatusTable 1.3.6.1.4.1.498.10.10 no-access
The GDC DC610 LED Status Table.
                     bqlDC610LEDEntry 1.3.6.1.4.1.498.10.10.1 no-access
An entry in the GDC DC610 LED Status table.
                         bqlDC610LEDIndex 1.3.6.1.4.1.498.10.10.1.1 scinstance read-only
This object is the index of the DC610 LED Status table.
                         bqlDC610LEDStatus 1.3.6.1.4.1.498.10.10.1.2 octet string read-only
The GDC DC610 front panel LED Status. A value of 1 means on, 0 is off. byte 1 bit 7 (1.7) - not used 1.6 - test mode 1.5 - sync 1.4 - request to send 1.3 - clear to send 1.2 - carrier on 1.1 - send data transitions 1.0 - receive data transitions
               bqlDC612Alarm 1.3.6.1.4.1.498.10.11
                     bqlDC612AlarmData 1.3.6.1.4.1.498.10.11.1
                         bqlDC612PowerUpAlm 1.3.6.1.4.1.498.10.11.1.1
                         bqlDC612Chnl1DTRAlm 1.3.6.1.4.1.498.10.11.1.2
                         bqlDC612Chnl2DTRAlm 1.3.6.1.4.1.498.10.11.1.3
                         bqlDC612NoResponseAlm 1.3.6.1.4.1.498.10.11.1.4
                         bqlDC612DiagRxErrAlm 1.3.6.1.4.1.498.10.11.1.5
               bqlDC612LEDStatusTable 1.3.6.1.4.1.498.10.12 no-access
The GDC DC612 LED Status Table.
                     bqlDC612LEDEntry 1.3.6.1.4.1.498.10.12.1 no-access
An entry in the GDC DC612 LED Status table.
                         bqlDC612LEDIndex 1.3.6.1.4.1.498.10.12.1.1 scinstance read-only
This object is the index of the DC612 LED Status table.
                         bqlDC612LEDStatus 1.3.6.1.4.1.498.10.12.1.2 octet string read-only
The GDC DC612 front panel LED Status. A value of 1 means on, 0 is off. byte 1 bit 7 (1.7) - not used 1.6 - not used 1.5 - not used 1.4 - not used 1.3 - not used 1.2 - not used 1.1 - channel 1 selected for front panel pushbutton operation 1.0 - channel 2 selected for front panel pushbutton operation 2.7 - not used 2.6 - channel 1 test mode 2.5 - channel 1 sync 2.4 - channel 1 request to send 2.3 - channel 1 clear to send 2.2 - channel 1 carrier on 2.1 - channel 1 send data transitions 2.0 - channel 1 receive data transitions 3.7 - not used 3.6 - channel 2 test mode 3.5 - channel 2 sync 3.4 - channel 2 request to send 3.3 - channel 2 clear to send 3.2 - channel 2 carrier on 3.1 - channel 2 send data transitions 3.0 - channel 2 receive data transitionscd
               bqlControlTable 1.3.6.1.4.1.498.10.13 no-access
The GDC SC616 Control Table.
                     bqlControlEntry 1.3.6.1.4.1.498.10.13.1 no-access
An entry in the GDC SC616 Control table.
                         bqlControlIndex 1.3.6.1.4.1.498.10.13.1.1 scinstance read-only
This object is the identifier of the SC616 Control table.
                         bqlSoftReset 1.3.6.1.4.1.498.10.13.1.2 integer read-write
Forces a soft reset on the network element. The reset selection is write only. The normal selection is read only. Enumeration: 'reset': 2, 'normal': 1.
                         bqlEraseConfig 1.3.6.1.4.1.498.10.13.1.3 integer read-write
Forces an erase of the stored configuration in the network element. The erase selection is write only. The normal selection is read only. Enumeration: 'erase': 2, 'normal': 1.
               bqlCurrentTable 1.3.6.1.4.1.498.10.14 no-access
The SC616 Current table.
                     bqlCurrentEntry 1.3.6.1.4.1.498.10.14.1 no-access
An entry in the SC616 Current table.
                         bqlCurrentIndex 1.3.6.1.4.1.498.10.14.1.1 scinstance read-only
The index value which uniquely identifies the SC616 DC610 or DC612 interface to which this entry is applicable.
                         bqlCurrentESs 1.3.6.1.4.1.498.10.14.1.2 gauge read-only
The number of Errored Seconds, encountered by an ISDN interface in the current 15 minute interval. This is defined as a second with at least one CRC error event or one or more out of frames (OOF).
                         bqlCurrentBESs 1.3.6.1.4.1.498.10.14.1.3 gauge read-only
The number of Bursty Errored Seconds (BESs) encountered by an ISDN interface in the current 15 minute interval. This is defined as a second with more than one but less than 640 CRC error events.
                         bqlCurrentSESs 1.3.6.1.4.1.498.10.14.1.4 gauge read-only
The number of Severely Errored Seconds encoun- tered by an ISDN interface in the current 15 minute interval. This is defined as a second with 640 or more CRC error events or one or more out of frames (OOF).
                         bqlCurrentUASs 1.3.6.1.4.1.498.10.14.1.5 gauge read-only
The number of Unavailable Seconds encountered by an ISDN interface in the current 15 minute interval. This is a count of one-second intervals during which service is not available.
                         bqlCurrentStats 1.3.6.1.4.1.498.10.14.1.6 octet string read-only
The number of ES, BES, ESE and UAS encountered by an ISDN interface in the current 15 minute interval. This is a count of one-second intervals during which service is not available.
               bqlIntervalTable 1.3.6.1.4.1.498.10.15 no-access
The SC616 Interval table.
                     bqlIntervalEntry 1.3.6.1.4.1.498.10.15.1 no-access
An entry in the SC616 Interval table.
                         bqlIntervalIndex 1.3.6.1.4.1.498.10.15.1.1 scinstance read-only
The index value which uniquely identifies the ISDN interface to which this entry is applicable.
                         bqlIntervalNumber 1.3.6.1.4.1.498.10.15.1.2 integer read-only
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minute inter- val (assuming that all 96 intervals are valid).
                         bqlIntervalESs 1.3.6.1.4.1.498.10.15.1.3 gauge read-only
The number of Errored Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. This is defined as a second with at least one CRC error event or one or more out of frames (OOF).
                         bqlIntervalBESs 1.3.6.1.4.1.498.10.15.1.4 gauge read-only
The number of Bursty Errored Seconds (BESs) encountered by an ISDN interface in one of the previous 96, individual 15 minute, intervals. This is defined as a second with more than one but less than 640 CRC error events.
                         bqlIntervalSESs 1.3.6.1.4.1.498.10.15.1.5 gauge read-only
The number of Severely Errored Seconds encoun- tered by an ISDN interface in one of the previous 96, individual 15 minute, intervals. This is defined as a second with 640 or more CRC error events or one or more out of frames (OOF).
                         bqlIntervalUASs 1.3.6.1.4.1.498.10.15.1.6 gauge read-only
The number of Unavailable Seconds encountered by an ISDN interface in one of the previous 96, individual 15 minute, intervals. This is a count of one-second intervals during which service is not available.
                         bqlIntervalStats 1.3.6.1.4.1.498.10.15.1.7 octet string read-only
The number of ES, BES, SES, and UAS encountered by an ISDN interface in one of the previous 96, individual 15 minute, intervals. This is a count of one-second intervals during which service is not available.
               bqlTotalTable 1.3.6.1.4.1.498.10.16 no-access
The SC616 Total table. 24 hour interval.
                     bqlTotalEntry 1.3.6.1.4.1.498.10.16.1 no-access
An entry in the SC616 Total table.
                         bqlTotalIndex 1.3.6.1.4.1.498.10.16.1.1 scinstance read-only
The index value which uniquely identifies the ISDN interface to which this entry is applicable.
                         bqlTotalESs 1.3.6.1.4.1.498.10.16.1.2 gauge read-only
The number of Errored Seconds encountered by an ISDN interface in the previous 24 hour interval. This is defined as a second with at least one CRC error event or one or more out of frames (OOF).
                         bqlTotalBESs 1.3.6.1.4.1.498.10.16.1.3 gauge read-only
The number of Bursty Errored Seconds (BESs) encountered by an ISDN interface in the previous 24 hour interval. This is defined as a second with more than one but less than 640 CRC error events.
                         bqlTotalSESs 1.3.6.1.4.1.498.10.16.1.4 gauge read-only
The number of Severely Errored Seconds encoun- tered by an ISDN interface in the previous 24 hour interval. This is defined as a second with 640 or more CRC error events or one or more out of frames (OOF).
                         bqlTotalUASs 1.3.6.1.4.1.498.10.16.1.5 gauge read-only
The number of Unavailable Seconds encountered by an ISDN interface in the previous 24 hour interval. This is a count of one-second intervals during which service is not available.
                         bqlTotalStats 1.3.6.1.4.1.498.10.16.1.6 octet string read-only
The number of ES, BES, SES and UAS encountered by an ISDN interface in the previous 24 hour interval. This is a count of one-second intervals during which service is not available.
               bqlDTERateTable 1.3.6.1.4.1.498.10.17 no-access
The DC610 DC612 DTE rate table.
                     bqlDTEEntry 1.3.6.1.4.1.498.10.17.1 no-access
An entry in the DC610 DC612 table.
                         bqlDTEIndex 1.3.6.1.4.1.498.10.17.1.1 scinstance read-only
The index value which uniquely identifies the DC610 DC612 interface to which this entry is applicable.
                         bqlDTE2Mapped 1.3.6.1.4.1.498.10.17.1.2 integer read-write
Forces a DC612 to map DTE channel 2 into channel 2 or channel 1. Enumeration: 'toChannel2': 1, 'toChannel1': 2.
                         bqlDTE2DataRate 1.3.6.1.4.1.498.10.17.1.3 integer read-write
Forces a DC612 DTE channel 2 to a K bit per second rate. Enumeration: 'kBps2400': 1, 'kBps64000': 9, 'kBps4800': 2, 'kBps9600': 3, 'kBps19200': 4, 'kBps38400': 5, 'kBps57600': 8, 'kBps128000': 10, 'kBps56000': 7, 'kBps48000': 6.
                         bqlDTE1Mapped 1.3.6.1.4.1.498.10.17.1.4 integer read-write
Forces a DC610 or DC612 to map DTE channel 1 into channel 1 or channel 2. Enumeration: 'toChannel2': 2, 'toChannel1': 1.
                         bqlDTE1DataRate 1.3.6.1.4.1.498.10.17.1.5 integer read-write
Forces a DC610 or DC612 DTE channel 1 to a K bit per second rate. Enumeration: 'kBps2400': 1, 'kBps64000': 9, 'kBps4800': 2, 'kBps9600': 3, 'kBps19200': 4, 'kBps38400': 5, 'kBps57600': 8, 'kBps128000': 10, 'kBps56000': 7, 'kBps48000': 6.
               bqlIntervalMaintenanceTable 1.3.6.1.4.1.498.10.18 no-access
The SC616, DC610, DC612 Loop Interval Maintenance table.
                     bqlIntervalMaintenanceEntry 1.3.6.1.4.1.498.10.18.1 no-access
The SC616, DC610, DC612 Interval Maintenance table entry.
                         bqlIntervalMaintenanceIndex 1.3.6.1.4.1.498.10.18.1.1 scinstance read-only
The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, and interface, which in this case is a Loop interface.
                         bqlResetIntervals 1.3.6.1.4.1.498.10.18.1.2 integer read-write
This variable is used to reset Loop performance intervals. When it is set to reset, the Loop performance tables are reset to zero. Enumeration: 'reset': 2, 'norm': 1.
                         bqlNumberofValidIntervals 1.3.6.1.4.1.498.10.18.1.3 integer read-only
This variable is used to read the number of intervals collected. Each interval is an increment of 15 minutes.
               bqlDC610LEDStatusNZTable 1.3.6.1.4.1.498.10.19 no-access
The GDC DC610NZ LED Status Table.
                     bqlDC610LEDNZEntry 1.3.6.1.4.1.498.10.19.1 no-access
An entry in the GDC DC610NZ LED Status table.
                         bqlDC610LEDNZIndex 1.3.6.1.4.1.498.10.19.1.1 scinstance read-only
This object is the index of the DC610 LED Status table.
                         bqlDC610LEDNZStatus 1.3.6.1.4.1.498.10.19.1.2 octet string read-only
The GDC DC610NZ front panel LED Status. A value of 1 means on, 0 is off. byte 1 bit 7 (1.7) - not used 1.6 - test mode 1.5 - 128K (sync ) 1.4 - request to send 1.3 - clear to send 1.2 - network available (carrier on) 1.1 - send data transitions 1.0 - receive data transitions
               bqlGT128Alarm 1.3.6.1.4.1.498.10.20
                     bqlGT128AlarmData 1.3.6.1.4.1.498.10.20.1
                         bqlGT128NoResponseAlm 1.3.6.1.4.1.498.10.20.1.1
                         bqlGT128DiagRxErrAlm 1.3.6.1.4.1.498.10.20.1.2
                         bqlGT128PowerUpAlm 1.3.6.1.4.1.498.10.20.1.3
                         bqlGT128Chnl1DTRAlm 1.3.6.1.4.1.498.10.20.1.4
               bqlGT128LEDStatusTable 1.3.6.1.4.1.498.10.21 no-access
The GDC GT 128 LED Status Table.
                     bqlGT128LEDEntry 1.3.6.1.4.1.498.10.21.1 no-access
An entry in the GDC GT128 LED Status table.
                         bqlGT128LEDIndex 1.3.6.1.4.1.498.10.21.1.1 scinstance read-only
This object is the index of the GT 128 LED Status table.
                         bqlGT128LEDStatus 1.3.6.1.4.1.498.10.21.1.2 octet string read-only
The GDC GT128 front panel LED Status. A value of 1 means on, 0 is off. byte 1 bit 7 (1.7) - not used 1.6 - test mode 1.5 - sync 1.4 - request to send 1.3 - clear to send 1.2 - carrier on 1.1 - send data transitions 1.0 - receive data transitions 2.6 - fu 2.5 - fu 2.4 - fu 2.3 - fu 2.2 - remote loopback ON 2.1 - selftest ON 2.0 - line loopback ON
               bqlGT128NZAlarm 1.3.6.1.4.1.498.10.22
                     bqlGT128NZAlarmData 1.3.6.1.4.1.498.10.22.1
                         bqlGT128NZNoResponseAlm 1.3.6.1.4.1.498.10.22.1.1
                         bqlGT128NZDiagRxErrAlm 1.3.6.1.4.1.498.10.22.1.2
                         bqlGT128NZPowerUpAlm 1.3.6.1.4.1.498.10.22.1.3
                         bqlGT128NZChnl1DTRAlm 1.3.6.1.4.1.498.10.22.1.4
               bqlGT128LEDNZStatusTable 1.3.6.1.4.1.498.10.23 no-access
The GDC GT 128 NZ LED Status Table.
                     bqlGT128LEDNZEntry 1.3.6.1.4.1.498.10.23.1 no-access
An entry in the GDC GT128 NZ LED Status table.
                         bqlGT128LEDNZIndex 1.3.6.1.4.1.498.10.23.1.1 scinstance read-only
This object is the index of the GT 128 NZ LED Status table.
                         bqlGT128LEDNZStatus 1.3.6.1.4.1.498.10.23.1.2 octet string read-only
The GDC GT128 NZ front panel LED Status. A value of 1 means on, 0 is off. byte 1 bit 7 (1.7) - not used 1.6 - test mode 1.5 - 128K (sync) 1.4 - request to send 1.3 - clear to send 1.2 - network available (carrier on) 1.1 - send data transitions 1.0 - receive data transitions 2.6 - fu 2.5 - fu 2.4 - fu 2.3 - fu 2.2 - remote loopback ON 2.1 - selftest ON 2.0 - line loopback ON