GBNL2Switch-MIB: View SNMP OID List / Download MIB

VENDOR: GCOM TECHNOLOGIES CO.,LTD.


 Home MIB: GBNL2Switch-MIB
Download as:   
SNMPv2-CONF, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, GREENTECH-MASTER-MIB, Q-BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 gbnL2Switch 1.3.6.1.4.1.13464.1.2.4.1
Gbn Common Enterprise MIB definition.
     gbnL2SwitchPacket 1.3.6.1.4.1.13464.1.2.4.1.1
         broadcastSuppress 1.3.6.1.4.1.13464.1.2.4.1.1.1 integer read-write
Rate limit Value, the maximum number of packets per second the switch should allow to receive .
         dlfForward 1.3.6.1.4.1.13464.1.2.4.1.1.2 integer read-write
Control the flooding of dlf packets.
         dlfForwardPortTable 1.3.6.1.4.1.13464.1.2.4.1.1.3 no-access
A table of dlf packets port control.
             dlfForwardPortEntry 1.3.6.1.4.1.13464.1.2.4.1.1.3.1 no-access
Table entry for dlf packets control.
                 dlfForwardPort 1.3.6.1.4.1.13464.1.2.4.1.1.3.1.1 integer read-only
The port number in dlf packets table Item.
                 dlfForwardStatus 1.3.6.1.4.1.13464.1.2.4.1.1.3.1.2 integer read-write
The dlf packets flag Item.
     gbnL2SwitchMac 1.3.6.1.4.1.13464.1.2.4.1.2
         macAddressTable 1.3.6.1.4.1.13464.1.2.4.1.2.1 no-access
A table of mac address .
             macAddressEntry 1.3.6.1.4.1.13464.1.2.4.1.2.1.1 no-access
Table entry for mac address .
                 macAddressMac 1.3.6.1.4.1.13464.1.2.4.1.2.1.1.1 macaddress read-only
The MAC address in arl table Item.
                 macAddressVID 1.3.6.1.4.1.13464.1.2.4.1.2.1.1.2 integer read-only
The vlan ID in arl table Item.
                 macAddressPort 1.3.6.1.4.1.13464.1.2.4.1.2.1.1.3 integer read-only
The port number in arl table Item.
                 macAddressStatus 1.3.6.1.4.1.13464.1.2.4.1.2.1.1.4 integer read-write
Enumeration: 'dynamic': 1, 'permanent': 3, 'static': 2, 'backhole': 4, 'delete': 5.
         macLearningPortTable 1.3.6.1.4.1.13464.1.2.4.1.2.2 no-access
A table of mac address learning port control.
             macLearningPortEntry 1.3.6.1.4.1.13464.1.2.4.1.2.2.1 no-access
Table entry for mac address learning control.
                 macAddressLearningPort 1.3.6.1.4.1.13464.1.2.4.1.2.2.1.1 integer read-only
The port number in mac address learning table Item.
                 macAddressLearningStatus 1.3.6.1.4.1.13464.1.2.4.1.2.2.1.2 integer read-write
The mac address learning flag Item. Enumeration: 'enable': 1, 'disable': 2.
                 macAddressMaxCount 1.3.6.1.4.1.13464.1.2.4.1.2.2.1.3 integer read-write
the max mac address number of port.
     gbnL2SwitchMulticast 1.3.6.1.4.1.13464.1.2.4.1.3
         igmpSnoopEnabled 1.3.6.1.4.1.13464.1.2.4.1.3.1 truthvalue read-write
DURABLE: { false } Setting this object to true(1) enables IGMP Snooping. Setting it to false(2) disables IGMP Snooping. Note that IGMP Snooping can function with or without GVRP and GMRP enabled.
         igmpSnoopAlerts 1.3.6.1.4.1.13464.1.2.4.1.3.2 truthvalue read-write
DURABLE: { false } Setting this object to true(1) enables the IP Router Alert Option (as defined in RFC2113) for transmitted IGMP packets. Setting it to false(2) disables this option.
         igmpSnoopAging 1.3.6.1.4.1.13464.1.2.4.1.3.3 integer32 read-write
DURABLE: { 300 } The timeout period in seconds for aging out Multicast Groups dynamically learned with IGMP Snooping. Note that aging operates on a per interface per VLAN per multicast group basis.
         igmpSnoopTable 1.3.6.1.4.1.13464.1.2.4.1.3.4 no-access
This table, which provides IGMP Snooping information, augments the 'dot1qStaticMulticastTable' in the Q-MIB (RFC2674).
             igmpSnoopEntry 1.3.6.1.4.1.13464.1.2.4.1.3.4.1 no-access
Displays by VLAN, Multicast Group, and Multicast receive port the set of ports enabled to forward Multicast Group traffic as determined by the IGMP Snooping task.
                 igmpSnoopEgressPorts 1.3.6.1.4.1.13464.1.2.4.1.3.4.1.1 portlist read-only
This read-only object displays the set of ports enabled to forward specific Multicast Group traffic as determined by the IGMP Snooping task. It should be noted that the IGMP Snooping task generates a pseudo- static (i.e., not saved in NVM) port list similar to the RFC2674 Q-MIB 'dot1qStaticMulticastStaticEgressPorts' object. Consequently, a port will not be a member of 'gbnCommonIgmpSnoopEgressPorts' if it is a member of 'dot1qStaticMulticastForbiddenEgressPorts'.
         igmpSnoopDefaultGroupPolicy 1.3.6.1.4.1.13464.1.2.4.1.3.5 integer read-write
The default group learning policy when a group address is not found in IGMP Snooping white-list and black-list Enumeration: 'deny': 0, 'permit': 1.
         igmpSnoopMaxResponseTime 1.3.6.1.4.1.13464.1.2.4.1.3.6 integer32 read-write
The timeout period in seconds waited before determinating whether a group port should be deleted or not after received a leave packet
         igmpSnoopPortTable 1.3.6.1.4.1.13464.1.2.4.1.3.7 no-access
Used to config IGMP Snooping port options,such as group-limit and fast-leave.
             igmpSnoopPortEntry 1.3.6.1.4.1.13464.1.2.4.1.3.7.1 no-access
Entries of igmpSnoopPortTable.
                 igmpSnoopPort 1.3.6.1.4.1.13464.1.2.4.1.3.7.1.1 integer read-only
Index that uniquely identifies a Ap port within igmpSnoopPortTable.
                 igmpSnoopPortFastLeave 1.3.6.1.4.1.13464.1.2.4.1.3.7.1.2 integer read-write
The fast-leave option of a IGMP Snooping port,when set a group port is deleted immediately on receiving a leave packet, otherwise a max-response-time should be waited before deleting the port. Enumeration: 'enable': 1, 'disable': 2.
                 igmpSnoopPortGroupLimit 1.3.6.1.4.1.13464.1.2.4.1.3.7.1.3 integer read-write
The max number of Multicast groups a port can learn.
                 igmpSnoopPortMcastVlan 1.3.6.1.4.1.13464.1.2.4.1.3.7.1.4 integer read-write
Specify a multicast vlan for a port.IGMP report groups received on the port will be add to the multicast vlan, regardless of the vlan id indicated by the report packets, a zero vlan means no multicast vlan is used.
         igmpSnoopGroupTable 1.3.6.1.4.1.13464.1.2.4.1.3.8 no-access
This table is used to config IGMP Snooping white-list and black-list.
             igmpSnoopGroupEntry 1.3.6.1.4.1.13464.1.2.4.1.3.8.1 no-access
Entries of igmpSnoopGroupTable.
                 igmpSnoopGroupAddress 1.3.6.1.4.1.13464.1.2.4.1.3.8.1.1 macaddress no-access
An index that uniquely identifies a multicast mac-address within igmpSnoopGroupTable.
                 igmpSnoopGroupPort 1.3.6.1.4.1.13464.1.2.4.1.3.8.1.2 integer no-access
An index that uniquely identifies a Ap port within igmpSnoopGroupTable.
                 igmpSnoopGroupVLAN 1.3.6.1.4.1.13464.1.2.4.1.3.8.1.3 integer no-access
An index that uniquely identifies a VLAN ID within igmpSnoopGroupTable.
                 igmpSnoopGroupPolicy 1.3.6.1.4.1.13464.1.2.4.1.3.8.1.4 integer read-write
This entry is used to config IGMP Snooping white-list and black-list.Policies defined in white-list and black-list are superior to that has beed defined by igmpSnoopDefaultGroupPolicy. If group is not found in white-list or black-list then 'igmpSnoopDefaultGroupPolicy' takes effect Enumeration: 'deny': 4, 'del': 5, 'permit': 3.
         crossVlanMulticastEnabled 1.3.6.1.4.1.13464.1.2.4.1.3.9 truthvalue read-write
Setting this object to true(1) enables cross-vlan multicast. Setting it to false(2) disables cross-vlan multicast.
         crossVlanMulticastTable 1.3.6.1.4.1.13464.1.2.4.1.3.10 no-access
Used to config port info of cross-vlan multicast,such as tag/untag and vlanid of tag.
               crossVlanMulticastEntry 1.3.6.1.4.1.13464.1.2.4.1.3.10.1 no-access
Entries of crossVlanMulticastPortTable.
                   crossVlanPort 1.3.6.1.4.1.13464.1.2.4.1.3.10.1.1 integer32 no-access
The port number.
                   crossVlanPortTag 1.3.6.1.4.1.13464.1.2.4.1.3.10.1.2 truthvalue read-write
Setting this object to true(1) of tag. Setting it to false(2) of untag.
                   crossVlanPortVid 1.3.6.1.4.1.13464.1.2.4.1.3.10.1.3 integer32 read-write
The vlanid of tag port.
         igmpSnoopRoutePortForward 1.3.6.1.4.1.13464.1.2.4.1.3.11 integer read-write
If the status is enabled, the route port can be added into the group automatically when an igmp snooping group is created . If the status is disabled, it will be not. Enumeration: 'disabled': 2, 'enabled': 1.
     gbnL2SwitchVLAN 1.3.6.1.4.1.13464.1.2.4.1.4
         portModeTable 1.3.6.1.4.1.13464.1.2.4.1.4.1 no-access
A Table of port mode.
             portModeEntry 1.3.6.1.4.1.13464.1.2.4.1.4.1.1 no-access
A list of portmode parameters.
                 portNumber 1.3.6.1.4.1.13464.1.2.4.1.4.1.1.1 integer32 read-only
port number'.
                 portMode 1.3.6.1.4.1.13464.1.2.4.1.4.1.1.2 integer read-write
type of mode Enumeration: 'access-port': 2, 'trunk-port': 1, 'hybrid-port': 3.
     gbnL2SwitchLacpGroup 1.3.6.1.4.1.13464.1.2.4.1.5
         channelGroupCreate 1.3.6.1.4.1.13464.1.2.4.1.5.1 integer read-write
Create a channel group .
         channelGroupDelete 1.3.6.1.4.1.13464.1.2.4.1.5.2 integer read-write
Delete a channel group. Make sure there is no member in this group .
         channelGroupTable 1.3.6.1.4.1.13464.1.2.4.1.5.3 no-access
A table that contains information about every Lacp channel group that is associated with this System.
             channelGroupEntry 1.3.6.1.4.1.13464.1.2.4.1.5.3.1 no-access
A list of the Lacp channel group parameters. This is indexed by the group index.
                 channelGroupIndex 1.3.6.1.4.1.13464.1.2.4.1.5.3.1.1 integer read-only
The Index of the Lacp Channel group.
                 channelGroupPortList 1.3.6.1.4.1.13464.1.2.4.1.5.3.1.2 portlist read-write
The complete set of ports currently associated with this Group. Each bit set in this list represents an Actor Port member of this Group.
                 channelGroupRule 1.3.6.1.4.1.13464.1.2.4.1.5.3.1.3 integer read-write
The Rule to be applied to this Link Aggregator's Trunk Group Table. The rules are based on the following selections SrcMAC (1), means that the last three bits of the Source MAC Address are used to index the Trunk Group to get the destination port. DestMAC (2), means the last three bits of the Destination MAC Address are used to index into the Trunk Group to get the destination port. SrcXORDestMAC (3), means that the last three bits of the Source MAC Address are logically XORed with the last three bits of the Destination MAC Address and used to index into the Trunk Group to get the destination port. SrcIP (4), means the last three bits of the Source IP Address are used to index into the Trunk Group to get the destination port. DestIP (5), means the last three bits of the Destination IP Address are used to index into the Trunk Group to get the destination port. SrcXORDestIP (6), means the last three bits of the Source IP Address are logically XORed with the last three bits of the Destination IP Address and used to index into the Trunk Group to get the destination port. This rule defines the distribution algorithm applied to the aggregated link. Enumeration: 'srcMAC': 1, 'destMAC': 2, 'destIP': 5, 'srcXORDestIP': 6, 'srcIP': 4, 'srcXORDestMAC': 3.
                 channelGroupRowstatus 1.3.6.1.4.1.13464.1.2.4.1.5.3.1.4 truthvalue read-write
rowstatus of channel group.
     gbnL2SwitchLacpPort 1.3.6.1.4.1.13464.1.2.4.1.6
         lacpPortModeTable 1.3.6.1.4.1.13464.1.2.4.1.6.1 no-access
A table that contains information about every Lacp channel group that is associated with this System.
             lacpPortModeEntry 1.3.6.1.4.1.13464.1.2.4.1.6.1.1 no-access
The port mode of lacp. This is indexed by the port number.
                 portIndex 1.3.6.1.4.1.13464.1.2.4.1.6.1.1.1 integer read-only
The Index of the port.
                 portLacpMode 1.3.6.1.4.1.13464.1.2.4.1.6.1.1.2 integer read-write
The mode of the Lacp Channel group.Static:link aggregation is static configguration,and lacp protocol do not run. Active:the port in this mode can send lacp pdu active.Passive:the port in this mode just send pdu when needed. Enumeration: 'active': 2, 'passive': 3, 'static': 1.
                 portLacpRowstatus 1.3.6.1.4.1.13464.1.2.4.1.6.1.1.3 truthvalue read-only
rowstatus of port.
     gbnL2SwitchMLD 1.3.6.1.4.1.13464.1.2.4.1.7
         mldSnoopEnabled 1.3.6.1.4.1.13464.1.2.4.1.7.1 truthvalue read-write
DURABLE: { false } Setting this object to true(1) enables MLD Snooping. Setting it to false(2) disables MLD Snooping. Note that MLD Snooping can function with or without GVRP and GMRP enabled.
         mldSnoopAlerts 1.3.6.1.4.1.13464.1.2.4.1.7.2 truthvalue read-write
DURABLE: { false } Setting this object to true(1) enables the IP Router Alert Option (as defined in RFC2113) for transmitted MLD packets. Setting it to false(2) disables this option.
         mldSnoopAging 1.3.6.1.4.1.13464.1.2.4.1.7.3 integer32 read-write
DURABLE: { 300 } The timeout period in seconds for aging out MLD Groups dynamically learned with MLD Snooping. Note that aging operates on a per interface per VLAN per multicast group basis.
         mldSnoopTable 1.3.6.1.4.1.13464.1.2.4.1.7.4 no-access
This table, which provides MLD Snooping information, augments the 'dot1qStaticMulticastTable' in the Q-MIB (RFC2674).
             mldSnoopEntry 1.3.6.1.4.1.13464.1.2.4.1.7.4.1 no-access
Displays by VLAN, MLD Group, and MLD receive port the set of ports enabled to forward MLD Group traffic as determined by the MLD Snooping task.
                 mldSnoopEgressPorts 1.3.6.1.4.1.13464.1.2.4.1.7.4.1.1 portlist read-only
This read-only object displays the set of ports enabled to forward specific MLD Group traffic as determined by the MLD Snooping task. It should be noted that the MLD Snooping task generates a pseudo- static (i.e., not saved in NVM) port list similar to the RFC2674 Q-MIB 'dot1qStaticMulticastStaticEgressPorts' object. Consequently, a port will not be a member of 'gbnCommonIgmpSnoopEgressPorts' if it is a member of 'dot1qStaticMulticastForbiddenEgressPorts'.
         mldSnoopDefaultGroupPolicy 1.3.6.1.4.1.13464.1.2.4.1.7.5 integer read-write
The default group learning policy when a group address is not found in MLD Snooping white-list and black-list Enumeration: 'deny': 0, 'permit': 1.
         mldSnoopMaxResponseTime 1.3.6.1.4.1.13464.1.2.4.1.7.6 integer32 read-write
The timeout period in seconds waited before determinating whether a group port should be deleted or not after received a leave packet
         mldSnoopPortTable 1.3.6.1.4.1.13464.1.2.4.1.7.7 no-access
Used to config MLD Snooping port options,such as group-limit and fast-leave.
             mldSnoopPortEntry 1.3.6.1.4.1.13464.1.2.4.1.7.7.1 no-access
Entries of mldSnoopPortTable.
                 mldSnoopPort 1.3.6.1.4.1.13464.1.2.4.1.7.7.1.1 integer read-only
Index that uniquely identifies a Ap port within mldSnoopPortTable.
                 mldSnoopPortFastLeave 1.3.6.1.4.1.13464.1.2.4.1.7.7.1.2 integer read-write
The fast-leave option of a MLD Snooping port,when set a group port is deleted immediately on receiving a leave packet, otherwise a max-response-time should be waited before deleting the port. Enumeration: 'enable': 1, 'disable': 2.
                 mldSnoopPortGroupLimit 1.3.6.1.4.1.13464.1.2.4.1.7.7.1.3 integer read-write
The max number of MLD groups a port can learn.
                 mldSnoopPortMcastVlan 1.3.6.1.4.1.13464.1.2.4.1.7.7.1.4 integer read-write
Specify a multicast vlan for a port.MLD report groups received on the port will be add to the multicast vlan, regardless of the vlan id indicated by the report packets, a zero vlan means no multicast vlan is used.
         mldSnoopGroupTable 1.3.6.1.4.1.13464.1.2.4.1.7.8 no-access
This table is used to config MLD Snooping white-list and black-list.
             mldSnoopGroupEntry 1.3.6.1.4.1.13464.1.2.4.1.7.8.1 no-access
Entries of mldSnoopGroupTable.
                 mldSnoopGroupAddress 1.3.6.1.4.1.13464.1.2.4.1.7.8.1.1 macaddress no-access
An index that uniquely identifies a multicast mac-address within mldSnoopGroupTable.
                 mldSnoopGroupPort 1.3.6.1.4.1.13464.1.2.4.1.7.8.1.2 integer no-access
An index that uniquely identifies a Ap port within mldSnoopGroupTable.
                 mldSnoopGroupVLAN 1.3.6.1.4.1.13464.1.2.4.1.7.8.1.3 integer no-access
An index that uniquely identifies a VLAN ID within mldSnoopGroupTable.
                 mldSnoopGroupPolicy 1.3.6.1.4.1.13464.1.2.4.1.7.8.1.4 integer read-write
This entry is used to config MLD Snooping white-list and black-list.Policies defined in white-list and black-list are superior to that has beed defined by mldSnoopDefaultGroupPolicy. If group is not found in white-list or black-list then 'mldSnoopDefaultGroupPolicy' takes effect Enumeration: 'deny': 4, 'del': 5, 'permit': 3.
         mldSnoopRoutePortForward 1.3.6.1.4.1.13464.1.2.4.1.7.9 integer read-write
If the status is enabled, the route port can be added into the group automatically when an mld snooping group is created . If the status is disabled, it will be not. Enumeration: 'disabled': 2, 'enabled': 1.