G6-PORT-MIB: View SNMP OID List / Download MIB

VENDOR: MICROSENS


 Home MIB: G6-PORT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, MICROSENS-G6-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 device 1.3.6.1.4.1.3181.10.6.1
Microsens private MIB for Generation 6 Ethernet Switches
     port 1.3.6.1.4.1.3181.10.6.1.81
           configTable 1.3.6.1.4.1.3181.10.6.1.81.1 no-access
This section defines the basic configuration parameter for each port.
               configEntry 1.3.6.1.4.1.3181.10.6.1.81.1.1 no-access
                   configPortIndex 1.3.6.1.4.1.3181.10.6.1.81.1.1.1 integer no-access
Automatically generated
                   configAlias 1.3.6.1.4.1.3181.10.6.1.81.1.1.2 displaystring read-write
Alternative descriptive port name, user defineable.
                   configPortOperation 1.3.6.1.4.1.3181.10.6.1.81.1.1.3 integer read-write
Enables the port for operation. When disabled, port is shut down. Enumeration: 'disabled': 0, 'enabled': 1.
                   configRole 1.3.6.1.4.1.3181.10.6.1.81.1.1.4 integer read-write
Defines is a port is a regular local user port or a link to the network. This setting is references in various sanity checks throughout the system. When in doubt leave at default setting. Enumeration: 'default': 0, 'downlink': 3, 'local': 1, 'uplink': 2.
                   configSpeed 1.3.6.1.4.1.3181.10.6.1.81.1.1.5 integer read-write
When Auto-Negotiation is disabled sets the ports data rate to the selected speed. When Auto-Negotiation is enabled it determines the highest data rate advertised on port. Enumeration: 'ms10Mbit': 0, 'ms100Mbit': 1, 'ms1000Mbit': 2, 'sfpAuto': 3.
                   configMtu 1.3.6.1.4.1.3181.10.6.1.81.1.1.6 integer read-write
MTU used only to have a place holder for SNMP ifTable Enumeration: 'ms1522Byte': 0, 'ms2048Byte': 1, 'ms10240Byte': 2.
                   configLoopProtection 1.3.6.1.4.1.3181.10.6.1.81.1.1.7 integer read-write
Loop protection detects ethernet loops that can occur when cables are plugged in a way that the data send out of a port come back to the switch on another port. This will result in a data loop of endless packets. Such a loop condition seriously affects network performance and must be avoided. Enumeration: 'disabled': 0, 'enabled': 1.
                   configAutoNegotiation 1.3.6.1.4.1.3181.10.6.1.81.1.1.8 integer read-write
Enables Auto-Negotiation mode. When Auto-Negotiation mode is enabled, the parameters speed, full_duplex and flow_control determine the advertised port abilites. When Auto-Negotiation is disabled, the parameters speed, full_duplex and flow_control determine the fixed port configuration. Auto-Negotiation is not available for fiber ports in 100 Mbps mode and must be switched off. Enumeration: 'disabled': 0, 'enabled': 1.
                   configFullDuplex 1.3.6.1.4.1.3181.10.6.1.81.1.1.9 integer read-write
When Auto-Negotiation is disabled sets port to full duplex operation (when disabled, port is in half duplex mode). When Auto-Negotiation is enabled, it determines the advertisement of full duplex capability. Enumeration: 'disabled': 0, 'enabled': 1.
                   configFlowcontrol 1.3.6.1.4.1.3181.10.6.1.81.1.1.10 integer read-write
When Auto-Negotiation is disabled sets port into flow control mode. When Auto-Negotiation is enabled, it determines the advertisement of flow control capability. Flow control is only supported when port is in full duplex mode. Enumeration: 'disabled': 0, 'enabled': 1.
                   configMdiMode 1.3.6.1.4.1.3181.10.6.1.81.1.1.11 integer read-write
Enables Auto MDI/MDI-X mode to automatically adapt port pinout to cable type used. When set to forced, port pinout is fixed. Enumeration: 'forceMdix': 2, 'auto': 0, 'forceMdiStd': 1.
                   configEnergyEfficiency 1.3.6.1.4.1.3181.10.6.1.81.1.1.12 integer read-write
Enable Energy Efficient Ethernet mode is only available for copper ports in 1000Base-T mode. Enumeration: 'disabled': 0, 'enabled': 1.
                   configDualMediaMode 1.3.6.1.4.1.3181.10.6.1.81.1.1.13 integer read-write
Define media selection for dual media ports. This function is only available on ports with dual media Phy. Enumeration: 'forceCopper': 3, 'forceFiber': 2, 'copperPriority': 1, 'fiberPriority': 0.
                   configAllowedOutgoingPorts 1.3.6.1.4.1.3181.10.6.1.81.1.1.14 integer read-write
This bitmask may be used to limit the outgoing traffic to certain ports. This feature is also known as port based vlan. Syntax: slot/port, slot/port or use hex value for quick setup = 0x3f (ports 1-6)
           monitorTable 1.3.6.1.4.1.3181.10.6.1.81.2 no-access
Port monitoring is a test tool which permits reading data from on port on another port for trouble shooting purposes.
               monitorEntry 1.3.6.1.4.1.3181.10.6.1.81.2.1 no-access
                   monitorIndex 1.3.6.1.4.1.3181.10.6.1.81.2.1.1 integer no-access
Automatically generated
                   monitorMode 1.3.6.1.4.1.3181.10.6.1.81.2.1.2 integer read-write
Defines in which mode of port monitoring operation is used. Default is DISABLED for normal operation. Enumeration: 'disabled': 0, 'rxOnly': 2, 'txOnly': 1, 'rxAndTx': 3.
                   monitorSource 1.3.6.1.4.1.3181.10.6.1.81.2.1.3 integer read-write
Source port(2) of which the traffic is to be monitored. CLI Syntax: 1/1 for first port. 1/1,1/3 for first and third port
                   monitorDestination 1.3.6.1.4.1.3181.10.6.1.81.2.1.4 integer32 read-write
Port on which the traffic monitored on the source port shall be copied to. Normally a network sniffer is connected to this port. Please observe that possibly the VLAN setting of the destination port must match the that of the monitored ports. CLI Syntax: 1/1 for first port.
           portRestartPort 1.3.6.1.4.1.3181.10.6.1.81.3 displaystring read-write
This function may be used to briefly disabled and enable the port. This may be used to restart port authentication for example. Please supply port number as parameter. The shorthand port format like 1 for 1/1 may be used. Syntax examples: restart_port = 1/2,1/5.
           portUplinkPorts 1.3.6.1.4.1.3181.10.6.1.81.100 integer read-only
Indicates which port(s) are connected to the network. The setting is derived from default setting and may be overridden by port.role setting.
           portDownlinkPorts 1.3.6.1.4.1.3181.10.6.1.81.101 integer read-only
Indicates to which port(s) a downstream switch is connected. The setting is derived from default setting and may be overridden by port.role setting.
           statusTable 1.3.6.1.4.1.3181.10.6.1.81.102 no-access
This status table indicates current port status and (negotiated) settings. It also displays if a port is logically blocked due to a certain protocol condition.
                   statusEntry 1.3.6.1.4.1.3181.10.6.1.81.102.1 no-access
                       statusPortIndex 1.3.6.1.4.1.3181.10.6.1.81.102.1.1 integer no-access
Automatically generated
                       statusLinkUp 1.3.6.1.4.1.3181.10.6.1.81.102.1.2 integer read-only
False: Link is down, True: Link is up. For dual media ports this indicates the status of the active media. Enumeration: 'true': 1, 'false': 0.
                       statusLastLinkChange 1.3.6.1.4.1.3181.10.6.1.81.102.1.3 displaystring read-only
Time when the link_up status changed the last time. Value may appear illogical if the system time is not properly set.
                       statusLinkState 1.3.6.1.4.1.3181.10.6.1.81.102.1.4 integer read-only
Logical port status. Enumeration: 'unauthVlan': 4, 'forwarding': 3, 'linkDown': 0, 'blocking': 1, 'learning': 2.
                       statusRxActivity 1.3.6.1.4.1.3181.10.6.1.81.102.1.5 integer read-only
Indicates true when data activity on the receiver is detected. Enumeration: 'true': 1, 'false': 0.
                       statusTxActivity 1.3.6.1.4.1.3181.10.6.1.81.102.1.6 integer read-only
Indicates true when data activity on the transmitter is detected. Enumeration: 'true': 1, 'false': 0.
                       statusMediaUsed 1.3.6.1.4.1.3181.10.6.1.81.102.1.7 integer read-only
indicates which media is used for dual media ports Enumeration: 'copper': 1, 'none': 0, 'fiber': 2.
                       statusSpeedUsed 1.3.6.1.4.1.3181.10.6.1.81.102.1.8 integer read-only
Actual (negotiated) port data rate. Enumeration: 'down': 0, 'ms10Mbit': 1, 'ms100Mbit': 2, 'ms1000Mbit': 3.
                       statusLoopedPort 1.3.6.1.4.1.3181.10.6.1.81.102.1.9 integer read-only
Usually empty. When a port loop is detected through loop protection function then the looped port is indicated here.
                       statusFullDuplexUsed 1.3.6.1.4.1.3181.10.6.1.81.102.1.10 integer read-only
False: Half duplex, True: Full duplex. Enumeration: 'none': 0, 'full': 1, 'half': 2.
                       statusFlowcontrolUsed 1.3.6.1.4.1.3181.10.6.1.81.102.1.11 integer read-only
False: No flow control, True: Use flow control. Enumeration: 'true': 1, 'false': 0.
                       statusMdiUsed 1.3.6.1.4.1.3181.10.6.1.81.102.1.12 integer read-only
False: MDI pinout, True: MDI-X pinout. Enumeration: 'true': 1, 'false': 0.
                       statusEeeActive 1.3.6.1.4.1.3181.10.6.1.81.102.1.13 integer read-only
When true Energy Efficent Ethernet is supported by both ends of the link and is active. Enumeration: 'true': 1, 'false': 0.
                       statusBlockingAlgorithm 1.3.6.1.4.1.3181.10.6.1.81.102.1.14 bits read-only
Flags indicate blocking request by which algorithm per port. Bits: 'dhcpFilterApplies': 8, 'rstpApplies': 2, 'bpduGuardApplies': 7, 'ringApplies': 3, 'macAuthApplies': 6, 'portIsEnabled': 0, 'loopPreventionApplies': 5, 'couplingApplies': 4, 'ms8021xApplies': 1.
                       statusLearningAlgorithm 1.3.6.1.4.1.3181.10.6.1.81.102.1.15 bits read-only
Flags indicate learning request by which algorithm per port. Bits: 'dhcpFilterApplies': 8, 'rstpApplies': 2, 'bpduGuardApplies': 7, 'ringApplies': 3, 'macAuthApplies': 6, 'portIsEnabled': 0, 'loopPreventionApplies': 5, 'couplingApplies': 4, 'ms8021xApplies': 1.
                       statusForwardingAlgorithm 1.3.6.1.4.1.3181.10.6.1.81.102.1.16 bits read-only
Flags indicate forwarding request by which algorithm per port. Bits: 'dhcpFilterApplies': 8, 'rstpApplies': 2, 'bpduGuardApplies': 7, 'ringApplies': 3, 'macAuthApplies': 6, 'portIsEnabled': 0, 'loopPreventionApplies': 5, 'couplingApplies': 4, 'ms8021xApplies': 1.
                       statusUnauthorizedAlgorithm 1.3.6.1.4.1.3181.10.6.1.81.102.1.17 bits read-only
Flags indicate use of unauthorized vlan request by which algorithm per port. Bits: 'dhcpFilterApplies': 8, 'rstpApplies': 2, 'bpduGuardApplies': 7, 'ringApplies': 3, 'macAuthApplies': 6, 'portIsEnabled': 0, 'loopPreventionApplies': 5, 'couplingApplies': 4, 'ms8021xApplies': 1.