G6-IGMP-MIB: View SNMP OID List / Download MIB

VENDOR: MICROSENS


 Home MIB: G6-IGMP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, MICROSENS-G6-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 protocol 1.3.6.1.4.1.3181.10.6.2
Microsens private MIB for Generation 6 Ethernet Switches
     igmp 1.3.6.1.4.1.3181.10.6.2.40
           igmpEnableIgmpSnooping 1.3.6.1.4.1.3181.10.6.2.40.1 integer read-write
General enable of the IGMP snooping function. When disabled all IGMP snooping in all VLANs is disabled as well. Enumeration: 'disabled': 0, 'enabled': 1.
           igmpEnableMldSnooping 1.3.6.1.4.1.3181.10.6.2.40.2 integer read-write
General enable of the MLD snooping function. When disabled all MLD snooping in all VLANs is disabled as well. Enumeration: 'disabled': 0, 'enabled': 1.
           igmpShowMulticastForVlan 1.3.6.1.4.1.3181.10.6.2.40.3 displaystring read-write
Filter MAC table to show only multicast MACs associated with a given VLAN range. Supply VLAN ID as parameter. Syntax example: igmp.show_multicast_for_vlan = 1-4,1000-2000.
           igmpShowMulticastForPort 1.3.6.1.4.1.3181.10.6.2.40.4 displaystring read-write
Filter MAC table to show only multicast MACs associated with a given port range. Supply port as parameter. The shorthand port format like 1 for 1/1 may be used. Syntax examples: igmp.show_multicast_for_port = 1/2,1/5 or igmp.show_multicast_for_port = 1-3,5.
           configTable 1.3.6.1.4.1.3181.10.6.2.40.5 no-access
This table defines IGMP snooping parameter per VLAN. The table entries are referenced by VLAN ID and must match corresponding VLAN filter entires defined under vlan.filter_config.vlan_id. Any number of table entires can be created to configure unique settings for different VLANs. The default entry for VLAN ID=0 cannot be deleted and it used when no VLAN are used in the system.
               configEntry 1.3.6.1.4.1.3181.10.6.2.40.5.1 no-access
                   configIndex 1.3.6.1.4.1.3181.10.6.2.40.5.1.1 integer no-access
Automatically generated
                   configVlanId 1.3.6.1.4.1.3181.10.6.2.40.5.1.2 displaystring read-write
Defines IGMP snooping table entry associated with this VLAN ID. This is the key value for the table.VLAN ID 0 is used to define the IGMP settings when VLANs are not used. Type '=:' to edit, use index '[*] = new_vlan:' to add an entry. Edit string to nothing to delete entry.
                   configEnableIgmpSnooping 1.3.6.1.4.1.3181.10.6.2.40.5.1.3 integer read-write
Enable IGMP (IPv4) snooping for this particular VLAN. Enumeration: 'disabled': 0, 'enabled': 1.
                   configEnableMldSnooping 1.3.6.1.4.1.3181.10.6.2.40.5.1.4 integer read-write
Enable MLD (IPv6) snooping for this particular VLAN. Enumeration: 'disabled': 0, 'enabled': 1.
                   configSnoopingPorts 1.3.6.1.4.1.3181.10.6.2.40.5.1.5 integer read-write
This parameter permits port selective IGMP/MLD snooping enabling. When empty all ports are enabled! Syntax: slot/port, slot/port or use hex value for quick setup. Example: = 0xf (ports 1-4)
                   configStaticRouterPorts 1.3.6.1.4.1.3181.10.6.2.40.5.1.6 integer read-write
When set corresponding ports will be marked as static router ports. Upon default no ports will be marked. Syntax: slot/port, slot/port or use hex value for quick setup. Example: = 0x30 (ports 5-6)
                   configMulticastRouterDetection 1.3.6.1.4.1.3181.10.6.2.40.5.1.7 integer read-write
Defines the mode for detecting the router port. Enumeration: 'routerDiscovery': 0, 'queryMessage': 1.
                   configEnableReportAggregation 1.3.6.1.4.1.3181.10.6.2.40.5.1.8 integer read-write
When enabled limits the number of reports received from same subnet to be transmitted only once to the router. Enumeration: 'disabled': 0, 'enabled': 1.
                   configEnableFloodingUnregisterPkt 1.3.6.1.4.1.3181.10.6.2.40.5.1.9 integer read-write
When enabled unregistered multicast streams are flooded on all ports (which are member of the source VLAN of this stream). When disabled unregistered multicast streams are forwarded on static router ports only. Enumeration: 'disabled': 0, 'enabled': 1.
                   configMcastGroupLimit 1.3.6.1.4.1.3181.10.6.2.40.5.1.10 integer32 read-write
Indicates the number of multicast groups in the table.
                   configGroupMembershipInterval 1.3.6.1.4.1.3181.10.6.2.40.5.1.11 integer32 read-write
IGMP group_membership_interval time in seconds.
                   configMaxResponseTime 1.3.6.1.4.1.3181.10.6.2.40.5.1.12 integer32 read-write
IGMP response time in seconds.
                   configEnableFastLeave 1.3.6.1.4.1.3181.10.6.2.40.5.1.13 integer read-write
Enables the software to remove the multicast group when it receives an IGMP leave report without first sending an IGMP query message to check if other users still require this group. This parameter is used for IGMPv2 hosts when only one host is present on each VLAN port. Enumeration: 'disabled': 0, 'enabled': 1.
                   configLastMemberQueryTime 1.3.6.1.4.1.3181.10.6.2.40.5.1.14 integer32 read-write
Sets the interval in seconds that the software waits after sending an IGMP query to verify that no hosts that want to receive a particular multicast group to remain on a network segment. If no hosts respond before the last_member_query_time expires, the multicast group is removed from the associated VLAN port.
                   configNeighborDeadInterval 1.3.6.1.4.1.3181.10.6.2.40.5.1.15 integer32 read-write
IGMP neighbor dead interval in seconds in case of router_discovery mode.
                   configRouterAgingTime 1.3.6.1.4.1.3181.10.6.2.40.5.1.16 integer32 read-write
IGMP router aging time in seconds.
           staticMulticastGroupsTable 1.3.6.1.4.1.3181.10.6.2.40.6 no-access
This table may be used to enter the multicast addresses of other protocols beside IGMP, that need to be forwarded when IGMP snooping is enabled. This can be used instead of flood_unregistered_packets parameter and reduces the traffic in the network.
               staticMulticastGroupsEntry 1.3.6.1.4.1.3181.10.6.2.40.6.1 no-access
                   staticMulticastGroupsIndex 1.3.6.1.4.1.3181.10.6.2.40.6.1.1 integer no-access
Automatically generated
                   staticMulticastGroupsName 1.3.6.1.4.1.3181.10.6.2.40.6.1.2 displaystring read-write
Unique name to reference this entry and to remember whose MAC address is entered.
                   staticMulticastGroupsDescription 1.3.6.1.4.1.3181.10.6.2.40.6.1.3 displaystring read-write
Enter any information required to remember what this rule is intended to do.
                   staticMulticastGroupsMulticastMac 1.3.6.1.4.1.3181.10.6.2.40.6.1.4 macaddress read-write
MAC address entry.
                   staticMulticastGroupsForwardingPortMask 1.3.6.1.4.1.3181.10.6.2.40.6.1.5 integer read-write
Enter the ports to which this multicast should be forwarded. A value of 0 disables this entry. Syntax: slot/port, slot/port or use hex value for quick setup. Example: = 0xf (ports 1-4)
                   staticMulticastGroupsVlanId 1.3.6.1.4.1.3181.10.6.2.40.6.1.6 integer32 read-write
VLAN on which the packets is entering.
           statusTable 1.3.6.1.4.1.3181.10.6.2.40.100 no-access
This table contains operational counters of the IGMP snooping module.
                   statusEntry 1.3.6.1.4.1.3181.10.6.2.40.100.1 no-access
                       statusIndex 1.3.6.1.4.1.3181.10.6.2.40.100.1.1 integer no-access
Automatically generated
                       statusIgmpRouterPorts 1.3.6.1.4.1.3181.10.6.2.40.100.1.2 integer read-only
Displays the igmp router ports list
                       statusRxGeneralQueries 1.3.6.1.4.1.3181.10.6.2.40.100.1.3 unsigned32 read-only
Displays the number of received general queries.
                       statusRxGroupQueries 1.3.6.1.4.1.3181.10.6.2.40.100.1.4 unsigned32 read-only
Displays the number of received group queries.
                       statusRxReports 1.3.6.1.4.1.3181.10.6.2.40.100.1.5 unsigned32 read-only
Displays the number of received report messages.
                       statusRxLeaves 1.3.6.1.4.1.3181.10.6.2.40.100.1.6 unsigned32 read-only
Displays the number of received leave messages.
                       statusRxAdvertisements 1.3.6.1.4.1.3181.10.6.2.40.100.1.7 unsigned32 read-only
Displays the number of received advertisements.
                       statusRxTerminations 1.3.6.1.4.1.3181.10.6.2.40.100.1.8 unsigned32 read-only
Displays the number of received terminations.
                       statusRxUnsupported 1.3.6.1.4.1.3181.10.6.2.40.100.1.9 unsigned32 read-only
Displays the number of received unsupported messages.
                       statusRxErrors 1.3.6.1.4.1.3181.10.6.2.40.100.1.10 unsigned32 read-only
Displays the number of received error packets.
                       statusTxSolicitations 1.3.6.1.4.1.3181.10.6.2.40.100.1.11 unsigned32 read-only
Displays the number of transmitted solicitation messges.
           mldStatusTable 1.3.6.1.4.1.3181.10.6.2.40.101 no-access
This table contains operational counters of the MLD snooping module.
                   mldStatusEntry 1.3.6.1.4.1.3181.10.6.2.40.101.1 no-access
                       mldStatusIndex 1.3.6.1.4.1.3181.10.6.2.40.101.1.1 integer no-access
Automatically generated
                       mldStatusMldRouterPorts 1.3.6.1.4.1.3181.10.6.2.40.101.1.2 integer read-only
Displays the igmp router ports list
                       mldStatusRxGeneralQueries 1.3.6.1.4.1.3181.10.6.2.40.101.1.3 unsigned32 read-only
Displays the number of received general queries.
                       mldStatusRxGroupQueries 1.3.6.1.4.1.3181.10.6.2.40.101.1.4 unsigned32 read-only
Displays the number of received group queries.
                       mldStatusRxReports 1.3.6.1.4.1.3181.10.6.2.40.101.1.5 unsigned32 read-only
Displays the number of received report messages.
                       mldStatusRxLeaves 1.3.6.1.4.1.3181.10.6.2.40.101.1.6 unsigned32 read-only
Displays the number of received leave messages.
                       mldStatusRxAdvertisements 1.3.6.1.4.1.3181.10.6.2.40.101.1.7 unsigned32 read-only
Displays the number of received advertisements.
                       mldStatusRxTerminations 1.3.6.1.4.1.3181.10.6.2.40.101.1.8 unsigned32 read-only
Displays the number of received terminations.
                       mldStatusRxUnsupported 1.3.6.1.4.1.3181.10.6.2.40.101.1.9 unsigned32 read-only
Displays the number of received unsupported messages.
                       mldStatusRxErrors 1.3.6.1.4.1.3181.10.6.2.40.101.1.10 unsigned32 read-only
Displays the number of received error packets.
                       mldStatusTxSolicitations 1.3.6.1.4.1.3181.10.6.2.40.101.1.11 unsigned32 read-only
Displays the number of transmitted solicitation messges.