FOUNDRY-SN-RT-L3-SWITCH-GROUP-MIB: View SNMP OID List / Download MIB

VENDOR: BROCADE


 Home MIB: FOUNDRY-SN-RT-L3-SWITCH-GROUP-MIB
Download as:   
FOUNDRY-SN-ROOT-MIB, SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 snIpxGen 1.3.6.1.4.1.1991.1.2.1.1
     snIpxClearCache 1.3.6.1.4.1.1991.1.2.1.1.3 clearstatus read-write
clear(1) will clear cache table.
     snIpxClearRoute 1.3.6.1.4.1.1991.1.2.1.1.4 clearstatus read-write
clear(1) will clear ipx route table.
     snIpxClearTrafficCnts 1.3.6.1.4.1.1991.1.2.1.1.5 clearstatus read-write
clear(1) will clear ipx all traffic counters. - snIpxRcvPktsCnt, snIpxFwdPktsCnt, snIpxRcvDropPktsCnt, snIpxTxDropPktsCnt, snIpxRcvFiltPktsCnt, snIpxTxFiltPktsCnt.
     snIpxRcvPktsCnt 1.3.6.1.4.1.1991.1.2.1.1.6 counter read-only
IPX incoming packets counter.
     snIpxFwdPktsCnt 1.3.6.1.4.1.1991.1.2.1.1.8 counter read-only
IPX forwarding packets counter.
     snIpxRcvFiltPktsCnt 1.3.6.1.4.1.1991.1.2.1.1.10 counter read-only
IPX receiving filter packets counter.
 snIpxCache 1.3.6.1.4.1.1991.1.2.1.2
     snIpxCacheTable 1.3.6.1.4.1.1991.1.2.1.2.1 no-access
IPX Cache table.
         snIpxCacheEntry 1.3.6.1.4.1.1991.1.2.1.2.1.1 no-access
An entry in the IPX Cache table.
             snIpxCacheIndex 1.3.6.1.4.1.1991.1.2.1.2.1.1.1 integer read-only
The table index for a IPX Cache entry.
             snIpxCacheNetNum 1.3.6.1.4.1.1991.1.2.1.2.1.1.2 octet string read-only
Cache Network number is represented by ASCII mainly for HP OpenView.
             snIpxCacheNode 1.3.6.1.4.1.1991.1.2.1.2.1.1.3 physaddress read-only
Cache Node Number.
             snIpxCacheOutFilter 1.3.6.1.4.1.1991.1.2.1.2.1.1.4 rtrstatus read-only
Cache Outbound Filter is ether disabled(0) or enabled(1).
             snIpxCacheEncap 1.3.6.1.4.1.1991.1.2.1.2.1.1.5 integer read-only
The IPX encapsulation frame type. Enumeration: 'ethernetSnap': 4, 'ethernet8023': 3, 'ethernetII': 1, 'ethernet8022': 2.
             snIpxCachePort 1.3.6.1.4.1.1991.1.2.1.2.1.1.6 portindex read-only
IPX Router Port number.
 snIpxRoute 1.3.6.1.4.1.1991.1.2.1.3
     snIpxRouteTable 1.3.6.1.4.1.1991.1.2.1.3.1 no-access
IPX route table.
         snIpxRouteEntry 1.3.6.1.4.1.1991.1.2.1.3.1.1 no-access
An entry in the IPX route table.
             snIpxRouteIndex 1.3.6.1.4.1.1991.1.2.1.3.1.1.1 integer read-only
The table index for a IPX route entry.
             snIpxDestNetNum 1.3.6.1.4.1.1991.1.2.1.3.1.1.2 octet string read-only
Destination Network number is represented by ASCII mainly for HP OpenView.
             snIpxFwdRouterNode 1.3.6.1.4.1.1991.1.2.1.3.1.1.3 physaddress read-only
Forward Router Node Number.
             snIpxDestHopCnts 1.3.6.1.4.1.1991.1.2.1.3.1.1.4 integer read-only
Number of hops to reach the destination.
             snIpxRouteMetric 1.3.6.1.4.1.1991.1.2.1.3.1.1.5 integer read-only
The metrics to next hop router.
             snIpxDestPort 1.3.6.1.4.1.1991.1.2.1.3.1.1.6 integer read-only
The destination port.
 snIpxFwdFilter 1.3.6.1.4.1.1991.1.2.1.5
     snIpxFwdFilterTable 1.3.6.1.4.1.1991.1.2.1.5.1 no-access
IPX Forward Filter table.
         snIpxFwdFilterEntry 1.3.6.1.4.1.1991.1.2.1.5.1.1 no-access
An entry in the IPX Forward Filter table.
             snIpxFwdFilterId 1.3.6.1.4.1.1991.1.2.1.5.1.1.1 integer read-only
The filter ID for a filter entry.
             snIpxFwdFilterAction 1.3.6.1.4.1.1991.1.2.1.5.1.1.2 action read-write
Action to take if the ipx packet match with this filter.
             snIpxFwdFilterSocket 1.3.6.1.4.1.1991.1.2.1.5.1.1.3 integer read-write
IPX Forward Filter Socket Number.
             snIpxFwdFilterSrcNet 1.3.6.1.4.1.1991.1.2.1.5.1.1.4 netnumber read-write
Source Network Number.
             snIpxFwdFilterSrcNode 1.3.6.1.4.1.1991.1.2.1.5.1.1.5 physaddress read-write
Source Node Number.
             snIpxFwdFilterDestNet 1.3.6.1.4.1.1991.1.2.1.5.1.1.6 netnumber read-write
Destination Network Number.
             snIpxFwdFilterDestNode 1.3.6.1.4.1.1991.1.2.1.5.1.1.7 physaddress read-write
Destination Node Number.
             snIpxFwdFilterRowStatus 1.3.6.1.4.1.1991.1.2.1.5.1.1.8 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
 snIpxPortCounters 1.3.6.1.4.1.1991.1.2.1.12
       snIpxPortCountersTable 1.3.6.1.4.1.1991.1.2.1.12.1 no-access
IPX port Counters table.
           snIpxPortCountersEntry 1.3.6.1.4.1.1991.1.2.1.12.1.1 no-access
An entry in the IPX Port Counters table.
               snIpxPortCountersPort 1.3.6.1.4.1.1991.1.2.1.12.1.1.1 portindex read-only
The port index for port Counters entry.
               snIpxPortCountersRcvPktsCnt 1.3.6.1.4.1.1991.1.2.1.12.1.1.2 counter read-only
IPX incoming packets counter for the interface.
               snIpxPortCountersFwdPktsCnt 1.3.6.1.4.1.1991.1.2.1.12.1.1.4 counter read-only
IPX forwarding packets counter for the interface.
               snIpxPortCountersRcvFiltPktsCnt 1.3.6.1.4.1.1991.1.2.1.12.1.1.7 counter read-only
IPX receiving filter packets counter for the interface.
 snRtIpGeneral 1.3.6.1.4.1.1991.1.2.2.1
     snRtClearArpCache 1.3.6.1.4.1.1991.1.2.2.1.1 clearstatus read-write
clear(1) will clear arp cache table.
     snRtClearIpCache 1.3.6.1.4.1.1991.1.2.2.1.2 clearstatus read-write
clear(1) will clear ip route cache table.
 snRtIpFilterTable 1.3.6.1.4.1.1991.1.2.2.3 no-access
IP filter table.
     snRtIpFilterEntry 1.3.6.1.4.1.1991.1.2.2.3.1 no-access
An entry in the IP filter table.
         snRtIpFilterIndex 1.3.6.1.4.1.1991.1.2.2.3.1.1 integer read-only
The table index for a filter entry.
         snRtIpFilterAction 1.3.6.1.4.1.1991.1.2.2.3.1.2 integer read-write
Action to take if the ip packet match with this filter. Enumeration: 'qosEnabled': 2, 'deny': 0, 'permit': 1.
         snRtIpFilterProtocol 1.3.6.1.4.1.1991.1.2.2.3.1.3 integer read-write
Transport protocol. 0 means don't care
         snRtIpFilterSourceIp 1.3.6.1.4.1.1991.1.2.2.3.1.4 ipaddress read-write
Source IP address.
         snRtIpFilterSourceMask 1.3.6.1.4.1.1991.1.2.2.3.1.5 ipaddress read-write
Source IP subnet mask.
         snRtIpFilterDestIp 1.3.6.1.4.1.1991.1.2.2.3.1.6 ipaddress read-write
Destination IP address.
         snRtIpFilterDestMask 1.3.6.1.4.1.1991.1.2.2.3.1.7 ipaddress read-write
Destination IP subnet mask.
         snRtIpFilterOperator 1.3.6.1.4.1.1991.1.2.2.3.1.8 integer read-write
Type of comparison to perform. for now, this only applys to tcp or udp to compare the port number Enumeration: 'notEqual': 4, 'less': 3, 'greater': 1, 'equal': 2.
         snRtIpFilterOperand 1.3.6.1.4.1.1991.1.2.2.3.1.9 integer read-write
For now this only refers to transport protocol port number. 0 means NA
         snRtIpFilterRowStatus 1.3.6.1.4.1.1991.1.2.2.3.1.10 rowsts read-write
To create or delete a filter entry.
         snRtIpFilterEstablished 1.3.6.1.4.1.1991.1.2.2.3.1.11 rtrstatus read-write
Enable/Disable the filtering of established TCP packets of which the ACK or RESET flag is on. This additional filter only applies to TCP transport protocol.
         snRtIpFilterQosPriority 1.3.6.1.4.1.1991.1.2.2.3.1.12 integer read-write
The router L4 Qos Priority values are: low(0) -- low prority high(1) -- high prority. The Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) Enumeration: 'level0': 0, 'level1': 1, 'level2': 2, 'level3': 3, 'level4': 4, 'level5': 5, 'level6': 6, 'level7': 7.
 snRtIpTraceRoute 1.3.6.1.4.1.1991.1.2.2.10
       snRtIpTraceRouteGeneral 1.3.6.1.4.1.1991.1.2.2.10.1
           snRtIpTraceRouteTargetAddr 1.3.6.1.4.1.1991.1.2.2.10.1.1 ipaddress read-write
Target IP address of which trace route is performed.
           snRtIpTraceRouteMinTtl 1.3.6.1.4.1.1991.1.2.2.10.1.2 integer read-write
Minimum TTL value carried in the first probe packet. Value 0 cannot be used for SET operations. This value is returned if traceroute is not running within the system.
           snRtIpTraceRouteMaxTtl 1.3.6.1.4.1.1991.1.2.2.10.1.3 integer read-write
Maximum TTL value carried in the last probe packet. Value 0 cannot be used for SET operations. This value is returned if traceroute is not running within the system.
           snRtIpTraceRouteTimeOut 1.3.6.1.4.1.1991.1.2.2.10.1.4 integer read-write
Time out period (in seconds) to wait for the response from the probe packet (i,e, the ICMP packet). Value 0 cannot be used for SET operations. This value is returned if traceroute is not running within the system.
           snRtIpTraceRouteControl 1.3.6.1.4.1.1991.1.2.2.10.1.5 integer read-write
Only 'start' and 'abort' are writable values; 'success', 'failure' and 'inProgress' are readeable (or returned) values. Writing 'start' to this object to initiate the trace route operation. snRtIpTraceRouteDestAddr must have been init- ialized before 'start' is writen. This object will return 'inProgress' after trace route operation has started. During the 'inProgress' state, writing 'abort' to this object will stop the current trace route operation. If the destination address is reached, this object returned 'success'. snRtIpTraceRouteResultTable contains the routes (and the target address) to reach the destination address. If the destination address does not reach, timeout, or ending TTL reached, 'failure' is returned. Enumeration: 'start': 1, 'inProgress': 5, 'abort': 2, 'success': 3, 'failure': 4.
       snRtIpTraceRouteResult 1.3.6.1.4.1.1991.1.2.2.10.2
           snRtIpTraceRouteResultTable 1.3.6.1.4.1.1991.1.2.2.10.2.1 no-access
Trace route result table.
               snRtIpTraceRouteResultEntry 1.3.6.1.4.1.1991.1.2.2.10.2.1.1 no-access
An entry of the trace route result table.
                   snRtIpTraceRouteResultIndex 1.3.6.1.4.1.1991.1.2.2.10.2.1.1.1 integer read-only
The table index for a trace route result entry.
                   snRtIpTraceRouteResultAddr 1.3.6.1.4.1.1991.1.2.2.10.2.1.1.2 ipaddress read-only
The router or the target address of which forms part of the route to reach the destination address.
                   snRtIpTraceRouteResultRoundTripTime1 1.3.6.1.4.1.1991.1.2.2.10.2.1.1.3 timeticks read-only
The round trip time between the first probe packet transmitted and the reponse ICMP packet received.
                   snRtIpTraceRouteResultRoundTripTime2 1.3.6.1.4.1.1991.1.2.2.10.2.1.1.4 timeticks read-only
The round trip time between the second probe packet transmitted and the reponse ICMP packet received.