FLARION-PHYS-MIB: View SNMP OID List / Download MIB

VENDOR: FLARION TECHNOLOGIES


 Home MIB: FLARION-PHYS-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, FLARION-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
         bbuSysTable 1.3.6.1.4.1.8603.1.2.1.2.5 no-access
Base Band Unit system information.
             bbuSysEntry 1.3.6.1.4.1.8603.1.2.1.2.5.1 no-access
Base Band Unit system table entry.
                 bbuSysId 1.3.6.1.4.1.8603.1.2.1.2.5.1.1 integer read-only
This identifies a single BBU in a basestation.
                 bbuDspVer 1.3.6.1.4.1.8603.1.2.1.2.5.1.2 displaystring read-only
The read-only statistic indicates the version number of the DSP software currently operational on the sector in question. It has the major.minor.micro notation.
                 bbuLlcVer 1.3.6.1.4.1.8603.1.2.1.2.5.1.3 displaystring read-only
The read-only statistic indicates the version number of the Link List Controller software/firmware currently operational on the sector in question. It has the major.minor notation.
                 bbuTxFpgaVer 1.3.6.1.4.1.8603.1.2.1.2.5.1.4 displaystring read-only
The read-only statistic indicates the version number of the Tx FPGA software/firmware currently operational on the sector in question. It has the major.minor notation.
                 bbuRxFpgaVer 1.3.6.1.4.1.8603.1.2.1.2.5.1.5 displaystring read-only
The read-only statistic indicates the version number of the Rx FPGA software/firmware currently operational on the sector in question. It has the major.minor notation.
                 bbuLdpcVer 1.3.6.1.4.1.8603.1.2.1.2.5.1.6 unsigned32 read-only
The read-only statistic indicates the version number of the LDPC encoder/decoder software/firmware currently operational on the sector in question. It has the major.minor notation.
                 bbuRfChanNum 1.3.6.1.4.1.8603.1.2.1.2.5.1.50 integer read-write
The RF channel number, in conjunction with the bbuRffBand object defines the frequency of operation. The channel number follows well-known ITU numbering, and represents 50 kHz spacing. The step size depends on the band. In the 1.9 GHz band, the step size is 4 (200 kHz). Editable offline.
                 bbuExtGainTx 1.3.6.1.4.1.8603.1.2.1.2.5.1.51 integer read-write
Represents the total external gain in the Tx path. Typically it equals PA gain minus any attenuators. The value is in dB * 32 (scaled by 32). E.g., default value is 43 dB, which is the PA gain, and is represented as 43*32 = 1376. This parameter is used to assist the mobile in making an access attempt at an appropriate power level. The step size is 1 dB. Editable online.
                 bbuExtGainRx 1.3.6.1.4.1.8603.1.2.1.2.5.1.52 integer read-write
Represents the total external gain in the Rx path. Typically it equals LNA gain minus any attenuators. The value is in dB * 32 (scaled by 32). E.g., default value is 31 dB, which is the LNA gain, and is represented as 31*32 = 992. This parameter is used to assist the mobile in making an access attempt at an appropriate power level. The step size is 1 dB. Editable online.
                 bbuRfGainRx0 1.3.6.1.4.1.8603.1.2.1.2.5.1.53 integer read-write
Represents the gain (in dB) provided by the RF Rx blade(RXU) in the Rx0 path. This gain is in addition to the gain provided by the LNA. This value is typically calibrated and set in the factory. The step size is 1 dB. Editable online.
                 bbuRfGainRx1 1.3.6.1.4.1.8603.1.2.1.2.5.1.54 integer read-write
Represents the gain (in dB) provided by the RF Rx blade(RXU) in the Rx1 path. This gain is in addition to the gain provided by the LNA. This value is typically calibrated and set in the factory. The step size is 1 dB. Editable online.
                 bbuRfBand 1.3.6.1.4.1.8603.1.2.1.2.5.1.55 integer read-write
The band of operation, represented by an enumeration. E.g., the 1.9 GHz PCS band has a value of 6, while the 2.1 GHz UMTS band has a value of 7. This quantity, in conjunction with the bbuRfChanNum decides the frequency of operation. Editable offline.
                 bbuRfPowerTx0 1.3.6.1.4.1.8603.1.2.1.2.5.1.56 integer read-write
Represents the signal strength in dBm of the Tx signal put out on Tx0 by the TXU. An increase in this implies an increase in the signal input to the PA. Step size is 1 dBm. Editable online.
                 bbuRfPowerTx1 1.3.6.1.4.1.8603.1.2.1.2.5.1.57 integer read-write
Represents the signal strength in dBm of the Tx signal put out on Tx1 by the TXU. An increase in this implies an increase in the signal input to the PA. Step size is 1 dBm. Editable online.
                 bbuRfuEnableMask 1.3.6.1.4.1.8603.1.2.1.2.5.1.59 integer read-write
This is a bit mask to choose between the 0 and 1 channels for Rx and Tx. The value should be an OR of the channels selected, where: Tx0 = 0001 Tx1 = 0010 Rx0 = 0100 Rx1 = 1000 For example, set this object to 6 if Rx0 and Tx1 need to be enabled.
                 bbuExtTxGain 1.3.6.1.4.1.8603.1.2.1.2.5.1.60 floatasstring read-write
External Tx gain. Valid range is -50.0 to 70.0.
                 bbuExtRxGain 1.3.6.1.4.1.8603.1.2.1.2.5.1.61 floatasstring read-write
External Rx gain. Valid range is -50.0 to 70.0.
                 bbuRfRx0Gain 1.3.6.1.4.1.8603.1.2.1.2.5.1.62 floatasstring read-write
Represents the gain (in dB) provided by the RF Rx blade(RXU) in the Rx0 path. This gain is in addition to the gain provided by the LNA. This value is typically calibrated and set in the factory. The step size is 1 dB. Valid range is -10.0 to 75.0. Editable online.
                 bbuRfRx1Gain 1.3.6.1.4.1.8603.1.2.1.2.5.1.63 floatasstring read-write
Represents the gain (in dB) provided by the RF Rx blade(RXU) in the Rx1 path. This gain is in addition to the gain provided by the LNA. This value is typically calibrated and set in the factory. The step size is 1 dB. Valid range is -10.0 to 75.0. Editable online.
                 bbuRfTx0Power 1.3.6.1.4.1.8603.1.2.1.2.5.1.64 floatasstring read-write
Represents the signal strength in dBm of the Tx signal put out on Tx0 by the TXU. An increase in this implies an increase in the signal input to the PA. Step size is 1 dBm. Valid range is -20.0 to 10.0. Editable online.
                 bbuRfTx1Power 1.3.6.1.4.1.8603.1.2.1.2.5.1.65 floatasstring read-write
Represents the signal strength in dBm of the Tx signal put out on Tx1 by the TXU. An increase in this implies an increase in the signal input to the PA. Step size is 1 dBm. Valid range is -20.0 to 10.0. Editable online.
                 bbuTxPwrDeviationLimit 1.3.6.1.4.1.8603.1.2.1.2.5.1.66 integer read-write
                 bbuSlope 1.3.6.1.4.1.8603.1.2.1.2.5.1.70 integer read-write
Represents the slope of the RR sector. It is an identifier which allows a mobile to distinguish between signals from different basestations. There are 112 possible slope values, however, only 80 of these are considered valid values. Editable offline.
                 bbuMcastSnr 1.3.6.1.4.1.8603.1.2.1.2.5.1.71 integer read-write
                 bbuScmType 1.3.6.1.4.1.8603.1.2.1.2.5.1.72 integer read-write
                 bbuSleepInactivityTimer 1.3.6.1.4.1.8603.1.2.1.2.5.1.91 integer read-write
Represents the amount of time of data inactivity (on the forward or reverse links) after which a mobile moves to the Sleep state. In units of 1/3 seconds [ eg. Value = 180 represents 60 seconds]. This time period is conveyed to the mobile at the time of establishing connectivity with the basestation. This quantity is non-linearly quantized, so the actual duration of inactivity before sleep may be slightly different from this value. Step size is 1/3 second. Range is 0 to 20 minutes. 0 means never go to sleep. Recommended value is 180 (i.e., 60sec). Editable online.
                 bbuLuTimer 1.3.6.1.4.1.8603.1.2.1.2.5.1.100 integer read-write
Periodicity, in seconds, of location update done by a stationary mobile. This time period is conveyed to the mobile at the time of establishing connectivity with the RR. This quantity is non-linearly quantized, so the actual duration of location update may be slightly different from this value. Step size is 1 second. Range is 5 seconds to 18 hours. Editable online.
     rrChassis 1.3.6.1.4.1.8603.1.2.1.8
         rrChassisType 1.3.6.1.4.1.8603.1.2.1.8.1 chassistype read-only
The chassis revision.
         rrChassisRev 1.3.6.1.4.1.8603.1.2.1.8.2 displaystring read-only
The chassis revision.
         rrChassisMaxSlots 1.3.6.1.4.1.8603.1.2.1.8.3 integer read-only
Maximum number of slots in the chassis.
         rrChassisNumCards 1.3.6.1.4.1.8603.1.2.1.8.4 integer read-only
Number of cards detected in the chassis.
         rrChassisTable 1.3.6.1.4.1.8603.1.2.1.8.5 no-access
Table containing chassis card information.
             rrChassisTableEntry 1.3.6.1.4.1.8603.1.2.1.8.5.1 no-access
RadioRouter chassis card table entry.
                 rrChassisSlotId 1.3.6.1.4.1.8603.1.2.1.8.5.1.1 integer read-only
The chassis slot of the card.
                 rrChassisSlotHwType 1.3.6.1.4.1.8603.1.2.1.8.5.1.2 motype read-only
The card type.
                 rrChassisSlotHwName 1.3.6.1.4.1.8603.1.2.1.8.5.1.3 displaystring read-only
The card name.
                 rrChassisSlotHwStatus 1.3.6.1.4.1.8603.1.2.1.8.5.1.4 cardopstate read-only
The card hardware operational status.
                 rrChassisSlotHwVer 1.3.6.1.4.1.8603.1.2.1.8.5.1.5 displaystring read-only
The card hardware version number.
                 rrChassisSlotHwEsn 1.3.6.1.4.1.8603.1.2.1.8.5.1.6 octet string read-only
The card Electronic Serial Number.
                 rrChassisSlotSwVer 1.3.6.1.4.1.8603.1.2.1.8.5.1.8 displaystring read-only
The card IPMI (Intelligent Platform Management Interface) firmware version number.
 rrPhyShelf 1.3.6.1.4.1.8603.1.2.3
     phyChassisType 1.3.6.1.4.1.8603.1.2.3.1 chassistype read-only
Chassis type.
     phySerialNumber 1.3.6.1.4.1.8603.1.2.3.2 displaystring read-only
Chassis serial number.
     phyProductionDate 1.3.6.1.4.1.8603.1.2.3.3 displaystring read-only
Chassis production date (mm/dd/yyyy).
     phyPartNumber 1.3.6.1.4.1.8603.1.2.3.4 displaystring read-only
Chassis part number.
     phyHardwareVersion 1.3.6.1.4.1.8603.1.2.3.5 displaystring read-only
Chassis hardware version.
     phyChassisRfBand 1.3.6.1.4.1.8603.1.2.3.6 rfband read-only
Chassis RF band.
     phyAssemblyId 1.3.6.1.4.1.8603.1.2.3.7 displaystring read-only
Chassis assembly ID.
     phyFanTable 1.3.6.1.4.1.8603.1.2.3.10 no-access
           phyFanEntry 1.3.6.1.4.1.8603.1.2.3.10.1 no-access
               phyFanIndex 1.3.6.1.4.1.8603.1.2.3.10.1.1 integer read-only
Fan index.
               phyFanOk 1.3.6.1.4.1.8603.1.2.3.10.1.2 truthvalue read-only
Fan status.
     phyRelayTable 1.3.6.1.4.1.8603.1.2.3.11 no-access
           phyRelayEntry 1.3.6.1.4.1.8603.1.2.3.11.1 no-access
               phyRelayIndex 1.3.6.1.4.1.8603.1.2.3.11.1.1 integer read-only
Relay index.
               phyRelayName 1.3.6.1.4.1.8603.1.2.3.11.1.2 displaystring read-write
Relay name.
               phyRelayState 1.3.6.1.4.1.8603.1.2.3.11.1.3 relaystate read-only
Relay state.
     phyAlarmInputTable 1.3.6.1.4.1.8603.1.2.3.12 no-access
           phyAlarmInputEntry 1.3.6.1.4.1.8603.1.2.3.12.1 no-access
               phyAlarmInputIndex 1.3.6.1.4.1.8603.1.2.3.12.1.1 integer read-only
AlarmInput index.
               phyAlarmInputEnable 1.3.6.1.4.1.8603.1.2.3.12.1.2 truthvalue read-write
AlarmInput enable.
               phyAlarmInputName 1.3.6.1.4.1.8603.1.2.3.12.1.3 displaystring read-write
AlarmInput name.
               phyAlarmInputState 1.3.6.1.4.1.8603.1.2.3.12.1.4 truthvalue read-only
AlarmInput state.
     phyPcuTable 1.3.6.1.4.1.8603.1.2.3.13 no-access
           phyPcuEntry 1.3.6.1.4.1.8603.1.2.3.13.1 no-access
               phyPcuIndex 1.3.6.1.4.1.8603.1.2.3.13.1.1 integer read-only
PCU index.
               phyPcuPowerFail 1.3.6.1.4.1.8603.1.2.3.13.1.2 truthvalue read-only
PCU power fail.
     phyAiuTable 1.3.6.1.4.1.8603.1.2.3.14 no-access
           phyAiuEntry 1.3.6.1.4.1.8603.1.2.3.14.1 no-access
               phyAiuIndex 1.3.6.1.4.1.8603.1.2.3.14.1.1 integer read-only
AIU index.
               phyAiuOpState 1.3.6.1.4.1.8603.1.2.3.14.1.2 cardopstate read-only
AIU operational state.
               phyAiuFaultLed 1.3.6.1.4.1.8603.1.2.3.14.1.3 cardfaultled read-only
AIU fault LED color.
               phyAiuTempStatus 1.3.6.1.4.1.8603.1.2.3.14.1.4 cardtempstatus read-only
AIU temperature status.
               phyAiuVoltageStatus 1.3.6.1.4.1.8603.1.2.3.14.1.5 cardvoltagestatus read-only
AIU voltage status.
               phyAiuSerialNumber 1.3.6.1.4.1.8603.1.2.3.14.1.6 displaystring read-only
AIU serial number.
               phyAiuProductionDate 1.3.6.1.4.1.8603.1.2.3.14.1.7 displaystring read-only
AIU production date.
               phyAiuPartNumber 1.3.6.1.4.1.8603.1.2.3.14.1.8 displaystring read-only
AIU part number.
               phyAiuDescription 1.3.6.1.4.1.8603.1.2.3.14.1.9 displaystring read-only
AIU description.
               phyAiuHardwareVersion 1.3.6.1.4.1.8603.1.2.3.14.1.10 displaystring read-only
AIU hardware version.
               phyAiuIpmiSwVersion 1.3.6.1.4.1.8603.1.2.3.14.1.11 displaystring read-only
AIU IPMI software version.
               phyAiuAssemblyId 1.3.6.1.4.1.8603.1.2.3.14.1.12 displaystring read-only
AIU assembly ID.
               phyAiuAssemblyIdSrc 1.3.6.1.4.1.8603.1.2.3.14.1.13 assemblyidsource read-only
AIU assembly ID source.
               phyAiuExcessiveFakeAid 1.3.6.1.4.1.8603.1.2.3.14.1.14 truthvalue read-only
This object is true(1) if the assembly ID is programmed under more than one source.
               phyAiuAdminState 1.3.6.1.4.1.8603.1.2.3.14.1.20 adminstate read-write
AIU administrative state.
               phyAiuRebootRr 1.3.6.1.4.1.8603.1.2.3.14.1.21 truthvalue read-write
Setting this object to true(1) will power cycle the RadioRouter chassis!
     phyMcuTable 1.3.6.1.4.1.8603.1.2.3.15 no-access
           phyMcuEntry 1.3.6.1.4.1.8603.1.2.3.15.1 no-access
               phyMcuIndex 1.3.6.1.4.1.8603.1.2.3.15.1.1 integer read-only
MCU index.
               phyMcuOpState 1.3.6.1.4.1.8603.1.2.3.15.1.2 cardopstate read-only
MCU operational state.
               phyMcuFaultLed 1.3.6.1.4.1.8603.1.2.3.15.1.3 cardfaultled read-only
MCU fault LED color.
               phyMcuTempStatus 1.3.6.1.4.1.8603.1.2.3.15.1.4 cardtempstatus read-only
MCU temperature status.
               phyMcuVoltageStatus 1.3.6.1.4.1.8603.1.2.3.15.1.5 cardvoltagestatus read-only
MCU voltage status.
               phyMcuSerialNumber 1.3.6.1.4.1.8603.1.2.3.15.1.6 displaystring read-only
MCU serial number.
               phyMcuProductionDate 1.3.6.1.4.1.8603.1.2.3.15.1.7 displaystring read-only
MCU production date.
               phyMcuPartNumber 1.3.6.1.4.1.8603.1.2.3.15.1.8 displaystring read-only
MCU part number.
               phyMcuDescription 1.3.6.1.4.1.8603.1.2.3.15.1.9 displaystring read-only
MCU description.
               phyMcuHardwareVersion 1.3.6.1.4.1.8603.1.2.3.15.1.10 displaystring read-only
MCU hardware version.
               phyMcuIpmiSwVersion 1.3.6.1.4.1.8603.1.2.3.15.1.11 displaystring read-only
MCU IPMI software version.
               phyMcuAssemblyId 1.3.6.1.4.1.8603.1.2.3.15.1.12 displaystring read-only
MCU assembly ID.
               phyMcuAssemblyIdSrc 1.3.6.1.4.1.8603.1.2.3.15.1.13 assemblyidsource read-only
MCU assembly ID source.
               phyMcuExcessiveFakeAid 1.3.6.1.4.1.8603.1.2.3.15.1.14 truthvalue read-only
This object is true if the assembly ID is programmed under more than one source.
               phyMcuAdminState 1.3.6.1.4.1.8603.1.2.3.15.1.20 adminstate read-write
MCU administrative state.
               phyCpldVersion 1.3.6.1.4.1.8603.1.2.3.15.1.21 displaystring read-only
MCU CPLD version.
     phyBbuTable 1.3.6.1.4.1.8603.1.2.3.16 no-access
           phyBbuEntry 1.3.6.1.4.1.8603.1.2.3.16.1 no-access
               phyBbuIndex 1.3.6.1.4.1.8603.1.2.3.16.1.1 integer read-only
BBU index.
               phyBbuOpState 1.3.6.1.4.1.8603.1.2.3.16.1.2 cardopstate read-only
BBU operational state.
               phyBbuFaultLed 1.3.6.1.4.1.8603.1.2.3.16.1.3 cardfaultled read-only
BBU fault LED color.
               phyBbuTempStatus 1.3.6.1.4.1.8603.1.2.3.16.1.4 cardtempstatus read-only
BBU temperature status.
               phyBbuVoltageStatus 1.3.6.1.4.1.8603.1.2.3.16.1.5 cardvoltagestatus read-only
BBU voltage status.
               phyBbuSerialNumber 1.3.6.1.4.1.8603.1.2.3.16.1.6 displaystring read-only
BBU serial number.
               phyBbuProductionDate 1.3.6.1.4.1.8603.1.2.3.16.1.7 displaystring read-only
BBU production date.
               phyBbuPartNumber 1.3.6.1.4.1.8603.1.2.3.16.1.8 displaystring read-only
BBU part number.
               phyBbuDescription 1.3.6.1.4.1.8603.1.2.3.16.1.9 displaystring read-only
BBU description.
               phyBbuHardwareVersion 1.3.6.1.4.1.8603.1.2.3.16.1.10 displaystring read-only
BBU hardware version.
               phyBbuIpmiSwVersion 1.3.6.1.4.1.8603.1.2.3.16.1.11 displaystring read-only
BBU IPMI software version.
               phyBbuAssemblyId 1.3.6.1.4.1.8603.1.2.3.16.1.12 displaystring read-only
BBU assembly Id.
               phyBbuAssemblyIdSrc 1.3.6.1.4.1.8603.1.2.3.16.1.13 assemblyidsource read-only
BBU assembly Id source.
               phyBbuExcessiveFakeAid 1.3.6.1.4.1.8603.1.2.3.16.1.14 truthvalue read-only
This object is true if the assembly ID is programmed under more than one source.
               phyBbuAdminState 1.3.6.1.4.1.8603.1.2.3.16.1.20 adminstate read-write
BBU administrative state.
     phyRxuTable 1.3.6.1.4.1.8603.1.2.3.17 no-access
           phyRxuEntry 1.3.6.1.4.1.8603.1.2.3.17.1 no-access
               phyRxuIndex 1.3.6.1.4.1.8603.1.2.3.17.1.1 integer read-only
RXU index.
               phyRxuOpState 1.3.6.1.4.1.8603.1.2.3.17.1.2 cardopstate read-only
RXU operational state.
               phyRxuFaultLed 1.3.6.1.4.1.8603.1.2.3.17.1.3 cardfaultled read-only
RXU fault LED color.
               phyRxuTempStatus 1.3.6.1.4.1.8603.1.2.3.17.1.4 cardtempstatus read-only
RXU temperature status.
               phyRxuVoltageStatus 1.3.6.1.4.1.8603.1.2.3.17.1.5 cardvoltagestatus read-only
RXU voltage status.
               phyRxuSerialNumber 1.3.6.1.4.1.8603.1.2.3.17.1.6 displaystring read-only
RXU serial number.
               phyRxuProductionDate 1.3.6.1.4.1.8603.1.2.3.17.1.7 displaystring read-only
RXU production date.
               phyRxuPartNumber 1.3.6.1.4.1.8603.1.2.3.17.1.8 displaystring read-only
RXU part number.
               phyRxuDescription 1.3.6.1.4.1.8603.1.2.3.17.1.9 displaystring read-only
RXU description.
               phyRxuHardwareVersion 1.3.6.1.4.1.8603.1.2.3.17.1.10 displaystring read-only
RXU hardware version.
               phyRxuIpmiSwVersion 1.3.6.1.4.1.8603.1.2.3.17.1.11 displaystring read-only
RXU IPMI software version.
               phyRxuAssemblyId 1.3.6.1.4.1.8603.1.2.3.17.1.12 displaystring read-only
RXU assembly ID.
               phyRxuAssemblyIdSrc 1.3.6.1.4.1.8603.1.2.3.17.1.13 assemblyidsource read-only
RXU assembly ID source.
               phyRxuExcessiveFakeAid 1.3.6.1.4.1.8603.1.2.3.17.1.14 truthvalue read-only
This object is true if the assembly ID is programmed under more than one source.
               phyRxuAdminState 1.3.6.1.4.1.8603.1.2.3.17.1.20 adminstate read-write
RXU administrative state.
               phyRxuRfBand 1.3.6.1.4.1.8603.1.2.3.17.1.21 rfband read-only
RXU RF band.
     phyTxuTable 1.3.6.1.4.1.8603.1.2.3.18 no-access
           phyTxuEntry 1.3.6.1.4.1.8603.1.2.3.18.1 no-access
               phyTxuIndex 1.3.6.1.4.1.8603.1.2.3.18.1.1 integer read-only
TXU index.
               phyTxuOpState 1.3.6.1.4.1.8603.1.2.3.18.1.2 cardopstate read-only
TXU operational state.
               phyTxuFaultLed 1.3.6.1.4.1.8603.1.2.3.18.1.3 cardfaultled read-only
TXU fault LED color.
               phyTxuTempStatus 1.3.6.1.4.1.8603.1.2.3.18.1.4 cardtempstatus read-only
TXU temperature status.
               phyTxuVoltageStatus 1.3.6.1.4.1.8603.1.2.3.18.1.5 cardvoltagestatus read-only
TXU voltage status.
               phyTxuSerialNumber 1.3.6.1.4.1.8603.1.2.3.18.1.6 displaystring read-only
TXU serial number.
               phyTxuProductionDate 1.3.6.1.4.1.8603.1.2.3.18.1.7 displaystring read-only
TXU production date.
               phyTxuPartNumber 1.3.6.1.4.1.8603.1.2.3.18.1.8 displaystring read-only
TXU part number.
               phyTxuDescription 1.3.6.1.4.1.8603.1.2.3.18.1.9 displaystring read-only
TXU description.
               phyTxuHardwareVersion 1.3.6.1.4.1.8603.1.2.3.18.1.10 displaystring read-only
TXU hardware version.
               phyTxuIpmiSwVersion 1.3.6.1.4.1.8603.1.2.3.18.1.11 displaystring read-only
TXU IPMI software version.
               phyTxuAssemblyId 1.3.6.1.4.1.8603.1.2.3.18.1.12 displaystring read-only
TXU assembly ID.
               phyTxuAssemblyIdSrc 1.3.6.1.4.1.8603.1.2.3.18.1.13 assemblyidsource read-only
TXU assembly ID source.
               phyTxuExcessiveFakeAid 1.3.6.1.4.1.8603.1.2.3.18.1.14 truthvalue read-only
This object is true if the assembly ID is programmed under more than one source.
               phyTxuAdminState 1.3.6.1.4.1.8603.1.2.3.18.1.20 adminstate read-write
TXU administrative state.
               phyTxuRfBand 1.3.6.1.4.1.8603.1.2.3.18.1.21 rfband read-only
TXU RF band.
 rrPaShelf 1.3.6.1.4.1.8603.1.2.4
     paTable 1.3.6.1.4.1.8603.1.2.4.1 no-access
         paEntry 1.3.6.1.4.1.8603.1.2.4.1.1 no-access
             paIndex 1.3.6.1.4.1.8603.1.2.4.1.1.1 integer read-only
Power Amp index.
             paAdminState 1.3.6.1.4.1.8603.1.2.4.1.1.2 adminstate read-write
PA administrative state.
             paOpState 1.3.6.1.4.1.8603.1.2.4.1.1.3 cardopstate read-only
PA operational state. This object is deprecated in favor of paOperStatus.
             paTempStatus 1.3.6.1.4.1.8603.1.2.4.1.1.4 cardtempstatus read-only
PA temperature status.
             paOutputTxPower 1.3.6.1.4.1.8603.1.2.4.1.1.5 floatasstring read-only
PA output transmit power, in dbm.
             paInputTxPower 1.3.6.1.4.1.8603.1.2.4.1.1.6 floatasstring read-only
PA input transmit power, in dbm.
             paTxReflectedPower 1.3.6.1.4.1.8603.1.2.4.1.1.7 floatasstring read-only
PA transmit reflected power, in dbm.
             paDcPowerFault 1.3.6.1.4.1.8603.1.2.4.1.1.8 truthvalue read-only
This object indicates if a PA DC power fault exists.
             paRfOverdriveFault 1.3.6.1.4.1.8603.1.2.4.1.1.9 truthvalue read-only
This object indicates if a PA RF overdrive fault exists.
             paFeedForwardFault 1.3.6.1.4.1.8603.1.2.4.1.1.10 truthvalue read-only
This object indicates if a PA feed forward fault exists.
             paSerialNumber 1.3.6.1.4.1.8603.1.2.4.1.1.11 displaystring read-only
PA serial number.
             paRfBand 1.3.6.1.4.1.8603.1.2.4.1.1.12 rfband read-only
PA RF band. This object is deprecated in favor of paRadioFreqBand.
             paHardwareVersion 1.3.6.1.4.1.8603.1.2.4.1.1.13 displaystring read-only
PA hardware version.
             paTemperature 1.3.6.1.4.1.8603.1.2.4.1.1.14 integer read-only
PA temperature (Celcius).
             paReflectedPowerFault 1.3.6.1.4.1.8603.1.2.4.1.1.15 truthvalue read-only
This object indicates if a reflected power fault exists.
             paUnderPowerFault 1.3.6.1.4.1.8603.1.2.4.1.1.16 truthvalue read-only
This object indicates if an under power fault exists.
             paTargetOutputTxPower 1.3.6.1.4.1.8603.1.2.4.1.1.17 floatasstring read-write
PA target output Tx power.
             paOperStatus 1.3.6.1.4.1.8603.1.2.4.1.1.18 pastate read-only
PA operational state.
             paRadioFreqBand 1.3.6.1.4.1.8603.1.2.4.1.1.19 parfband read-only
PA RF band.
     paFanSpeedOk 1.3.6.1.4.1.8603.1.2.4.2 truthvalue read-only
This object indicates if the PA shelf fan speed is within normal operating limits.
     paFanTempOk 1.3.6.1.4.1.8603.1.2.4.3 truthvalue read-only
This object indicates if the PA shelf fan temperature is within normal operating limits.
     paBreakerTripped 1.3.6.1.4.1.8603.1.2.4.4 truthvalue read-only
This object indicates if a PA shelf breaker has been tripped.
     paSimulcast 1.3.6.1.4.1.8603.1.2.4.5 truthvalue read-write
This object indicates if the PA shelf supports simulcast.
     paTxCalEnabled 1.3.6.1.4.1.8603.1.2.4.6 truthvalue read-write
This object indicates if PX Gain control loop is enabled.
     paPowerTable 1.3.6.1.4.1.8603.1.2.4.7 no-access
This table is used to display PA various Tx power values. These values are store on the system as floating point numbers, but since SNMP cannot display floating point numbers, this table will convert the values to integer.
         paPowerEntry 1.3.6.1.4.1.8603.1.2.4.7.1 no-access
             paPowerIndex 1.3.6.1.4.1.8603.1.2.4.7.1.1 integer read-only
PA index.
             paPowerTxOutput 1.3.6.1.4.1.8603.1.2.4.7.1.2 integer read-only
PA output Tx power. In order to retain precision in converting the floating point value into integer, the value is first multiplied by 100. For example 43.25dB will be represented as 4325.
             paPowerTxInput 1.3.6.1.4.1.8603.1.2.4.7.1.3 integer read-only
PA input Tx power. In order to retain precision in converting the floating point value into integer, the value is first multiplied by 100. For example -50.75dB will be represented as -5075.
             paPowerTxReflected 1.3.6.1.4.1.8603.1.2.4.7.1.4 integer read-only
PA reflected Tx power. In order to retain precision in converting the floating point value into integer, the value is first multiplied by 100. For example 21.00dB will be represented as 2100.