FDDI350-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: FDDI350-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 fddi 1.3.6.1.2.1.10.15
       snmpFddiSMT 1.3.6.1.2.1.10.15.1
           snmpFddiSMTNumber 1.3.6.1.2.1.10.15.1.1 integer read-only
The number of SMT implementations (regardless of their current state) on this network management application entity. The value for this variable must remain constant at least from one re- initialization of the entity's network management system to the next re-initialization.
           snmpFddiSMTTable 1.3.6.1.2.1.10.15.1.2 no-access
A list of SMT entries. The number of entries is given by the value of snmpFddiSMTNumber.
               snmpFddiSMTEntry 1.3.6.1.2.1.10.15.1.2.1 no-access
An SMT entry containing information common to a given SMT.
                   snmpFddiSMTIndex 1.3.6.1.2.1.10.15.1.2.1.1 integer read-only
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                   snmpFddiSMTStationId 1.3.6.1.2.1.10.15.1.2.1.2 fddismtstationidtype read-only
Uniquely identifies an FDDI station.
                   snmpFddiSMTOpVersionId 1.3.6.1.2.1.10.15.1.2.1.3 integer read-only
The version that this station is using for its operation (refer to ANSI 7.1.2.2).
                   snmpFddiSMTHiVersionId 1.3.6.1.2.1.10.15.1.2.1.4 integer read-only
The highest version of SMT that this station supports (refer to ANSI 7.1.2.2).
                   snmpFddiSMTLoVersionId 1.3.6.1.2.1.10.15.1.2.1.5 integer read-only
The lowest version of SMT that this station supports (refer to ANSI 7.1.2.2).
                   snmpFddiSMTMACCt 1.3.6.1.2.1.10.15.1.2.1.6 integer read-only
The number of MACs in the station or concentrator.
                   snmpFddiSMTNonMasterCt 1.3.6.1.2.1.10.15.1.2.1.7 integer read-only
The number of Non Master PORTs (A, B, or S PORTs) in the station or concentrator.
                   snmpFddiSMTMasterCt 1.3.6.1.2.1.10.15.1.2.1.8 integer read-only
The number of Master PORTs in a node. If the node is not a concentrator, the value is zero.
                   snmpFddiSMTPathsAvailable 1.3.6.1.2.1.10.15.1.2.1.9 integer read-only
A value that indicates the PATH types available in the station. The value is a sum. This value initially takes the value zero, then for each type of PATH that this node has available, 2 raised to a power is added to the sum. The powers are according to the following table: Path Power Primary 0 Secondary 1 Local 2 For example, a station having Primary and Local PATHs available would have a value of 5 (2**0 + 2**2).
                   snmpFddiSMTConfigCapabilities 1.3.6.1.2.1.10.15.1.2.1.10 integer read-only
A value that indicates capabilities that are present in the node. If 'holdAvailable' is present, this indicates support of the optional Hold Function (refer to ANSI SMT 9.4.3.2). If 'CF-Wrap-AB' is present, this indicates that the WRAP_AB state is forced. The value is a sum. This value initially takes the value zero, then for each of the configuration policies currently enforced on the node, 2 raised to a power is added to the sum. The powers are according to the following table: Policy Power holdAvailable 0 CF-Wrap-AB 1
                   snmpFddiSMTConfigPolicy 1.3.6.1.2.1.10.15.1.2.1.11 integer read-only
A value that indicates the configuration policies currently enforced in the node (refer to ANSI SMT 9.4.3.2). The 'configurationHold' policy refers to the Hold flag, and should not be present only if the Hold function is supported. The 'CF-Wrap- AB' policy refers to the CF_Wrap_AB flag. The value is a sum. This value initially takes the value zero, then for each of the configuration policies currently enforced on the node, 2 raised to a power is added to the sum. The powers are according to the following table: Policy Power configurationHold 0 CF-Wrap-AB 1
                   snmpFddiSMTConnectionPolicy 1.3.6.1.2.1.10.15.1.2.1.12 integer read-only
A value that indicates the connection policies enforced at the station. A station sets the corresponding policy for each of the connection types that it rejects. The letter designations, X and Y, in the 'rejectX-Y' names have the following significance: X represents the PC-Type of the local PORT and Y represents a PC-Neighbor in the evaluation of Connection-Policy (PC-Type, PC- Neighbor) that is done to determine the setting of T-Val(3) in the PC-Signaling sequence (refer to ANSI Section 9.6.3). The value is a sum. This value initially takes the value zero, then for each of the connection policies currently enforced on the node, 2 raised to a power is added to the sum. The powers are according to the following table: Policy Power rejectA-A 0 rejectA-B 1 rejectA-S 2 rejectA-M 3 rejectB-A 4 rejectB-B 5 rejectB-S 6 rejectB-M 7 rejectS-A 8 rejectS-B 9 rejectS-S 10 rejectS-M 11 rejectM-A 12 rejectM-B 13 rejectM-S 14 rejectM-M 15 Implementors should note that the polarity of these bits is different in different places in an SMT system. Implementors should take appropriate care.
                   snmpFddiSMTTNotify 1.3.6.1.2.1.10.15.1.2.1.13 integer read-write
The timer used in the Neighbor Notification protocol, reported in seconds and ranging from 2 to 30 seconds (refer to ANSI SMT 8.3.1).
                   snmpFddiSMTStatusReporting 1.3.6.1.2.1.10.15.1.2.1.14 integer read-only
Indicates whether the node implements the Status Reporting Protocol. This object is included for compatibility with products that were designed prior to the adoption of this standard. Enumeration: 'true': 1, 'false': 2.
                   snmpFddiSMTECMState 1.3.6.1.2.1.10.15.1.2.1.15 integer read-only
Indicates the current state of the ECM state machine (refer to ANSI SMT 9.5.2). Enumeration: 'ec7': 8, 'ec6': 7, 'ec5': 6, 'ec4': 5, 'ec3': 4, 'ec2': 3, 'ec1': 2, 'ec0': 1.
                   snmpFddiSMTCFState 1.3.6.1.2.1.10.15.1.2.1.16 integer read-only
The attachment configuration for the station or concentrator (refer to ANSI SMT 9.7.4.3). Enumeration: 'cf4': 5, 'cf5': 6, 'cf2': 3, 'cf3': 4, 'cf0': 1, 'cf1': 2.
                   snmpFddiSMTHoldState 1.3.6.1.2.1.10.15.1.2.1.17 integer read-only
This value indicates the current state of the Hold function. The values are determined as follows: 'holding-prm' is set if the primary ring is operational and the Recovery Enable Flag is clear (NOT NO_Flag(primary) AND NOT RE_Flag). is set if the secondary ring is operational and the Recovery Enable Flag is clear (NOT NO_Flag(secondary) AND NOT RE_Flag). Ref 9.4.3. and 10.3.1. the primary or secondary, i.e., the Recovery Enable, RE_Flag, is set. Enumeration: 'holding-prm': 3, 'not-implemented': 1, 'holding-sec': 4, 'not-holding': 2.
                   snmpFddiSMTRemoteDisconnectFlag 1.3.6.1.2.1.10.15.1.2.1.18 integer read-only
A flag indicating that the station was remotely disconnected from the network. A station requires a Connect Action (SM_CM_CONNECT.request (Connect)) to rejoin and clear the flag (refer to ANSI 6.4.5.2). Enumeration: 'true': 1, 'false': 2.
                   snmpFddiSMTStationAction 1.3.6.1.2.1.10.15.1.2.1.19 integer read-write
This object, when read, always returns a value of other(1). The behavior of setting this variable to each of the acceptable values is as follows: Other: Results in a badValue error. Connect: Generates an SM_CM_Connect.request(connect) signal to CMT indicating that the ECM State machine is to begin a connection sequence. The fddiSMTRemoteDisconnectFlag is cleared on the setting of this variable to 1. See ANSI Ref 9.3.1.1. Disconnect: Generates an SM_CM_Connect.request(disconnect) signal to ECM and sets the fddiSMTRemoteDisconnectFlag. See ANSI Ref 9.3.1.1. Path-Test: Initiates a station path test. The Path_Test variable (See ANSI Ref. 9.4.1) is set to Testing. The results of this action are not specified in this standard. Self-Test: Initiates a station self test. The results of this action are not specified in this standard. Attempts to set this object to all other values results in a badValue error. Agents may elect to return a badValue error on attempts to set this variable to path-Test(4) or self-Test(5). Enumeration: 'other': 1, 'disconnect': 3, 'connect': 2, 'self-Test': 5, 'path-Test': 4.
       snmpFddiMAC 1.3.6.1.2.1.10.15.2
           snmpFddiMACNumber 1.3.6.1.2.1.10.15.2.1 integer read-only
The total number of MAC implementations (across all SMTs) on this network management application entity. The value for this variable must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
           snmpFddiMACTable 1.3.6.1.2.1.10.15.2.2 no-access
A list of MAC entries. The number of entries is given by the value of snmpFddiMACNumber.
               snmpFddiMACEntry 1.3.6.1.2.1.10.15.2.2.1 no-access
A MAC entry containing information common to a given MAC.
                   snmpFddiMACSMTIndex 1.3.6.1.2.1.10.15.2.2.1.1 integer read-only
The value of the SMT index associated with this MAC.
                   snmpFddiMACIndex 1.3.6.1.2.1.10.15.2.2.1.2 integer read-only
A unique value for each MAC on the managed entity. The MAC identified by a particular value of this index is that identified by the same value of an ifIndex object instance. That is, if a MAC is associated with the interface whose value of ifIndex in the Internet-Standard MIB is equal to 5, then the value of snmpFddiMACIndex shall also equal 5. The value for each MAC must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                   snmpFddiMACFrameStatusCapabilities 1.3.6.1.2.1.10.15.2.2.1.3 integer read-only
A value that indicates the MAC's bridge and end- station capabilities for operating in a bridged FDDI network. The value is a sum. This value initially takes the value zero, then for each capability present, 2 raised to a power is added to the sum. The powers are according to the following table: Capability Power FSC-Type0 0 -- MAC repeats A/C indicators as received on -- copying with the intent to forward. FSC-Type1 1 -- MAC sets C but not A on copying for -- forwarding. FSC-Type2 2 -- MAC resets C and sets A on C set and -- A reset if the frame is not copied and the -- frame was addressed to this MAC FSC-Type0-programmable 8 -- Type0 capability is programmable FSC-Type1-programmable 9 -- Type1 capability is programmable FSC-Type2-programmable 10 -- Type2 capability is programmable
                   snmpFddiMACTMaxGreatestLowerBound 1.3.6.1.2.1.10.15.2.2.1.4 fdditime read-only
The greatest lower bound of T_Max supported for this MAC.
                   snmpFddiMACTVXGreatestLowerBound 1.3.6.1.2.1.10.15.2.2.1.5 fdditime read-only
The greatest lower bound of TVX supported for this MAC.
                   snmpFddiMACPathsAvailable 1.3.6.1.2.1.10.15.2.2.1.6 integer read-only
A value that indicates the PATH types available for this MAC. The value is a sum. This value initially takes the value zero, then for each type of PATH that this MAC has available, 2 raised to a power is added to the sum. The powers are according to the following table: Path Power Primary 0 Secondary 1 Local 2
                   snmpFddiMACCurrentPath 1.3.6.1.2.1.10.15.2.2.1.7 integer read-only
Indicates the association of the MAC with a station PATH. Enumeration: 'unknown': 1, 'secondary': 4, 'local': 8, 'primary': 2, 'isolated': 16.
                   snmpFddiMACUpstreamNbr 1.3.6.1.2.1.10.15.2.2.1.8 fddimaclongaddresstype read-only
The MAC's upstream neighbor's long individual MAC address. It may be determined by the Neighbor Information Frame protocol (refer to ANSI SMT 7.2.1). The value shall be reported as '00 00 00 00 00 00' if it is unknown.
                   snmpFddiMACOldUpstreamNbr 1.3.6.1.2.1.10.15.2.2.1.9 fddimaclongaddresstype read-only
The previous value of the MAC's upstream neighbor's long individual MAC address. It may be determined by the Neighbor Information Frame protocol (refer to ANSI SMT 7.2.1). The value shall be reported as '00 00 00 00 00 00' if it is unknown.
                   snmpFddiMACDupAddrTest 1.3.6.1.2.1.10.15.2.2.1.10 integer read-only
The Duplicate Address Test flag, Dup_Addr_Test (refer to ANSI 8.3.1). Enumeration: 'fail': 3, 'none': 1, 'pass': 2.
                   snmpFddiMACPathsRequested 1.3.6.1.2.1.10.15.2.2.1.11 integer read-write
A value that indicates PATH(s) desired for this MAC. The value is a sum which represents the individual PATHs that are desired. This value initially takes the value zero, then for each type of PATH that this node is, 2 raised to a power is added to the sum. The powers are according to the following table: Path Power Primary 0 Secondary 1 Local 2 Isolated 3 The precedence order is primary, secondary, local, and then isolated if multiple PATHs are desired are set.
                   snmpFddiMACDownstreamPORTType 1.3.6.1.2.1.10.15.2.2.1.12 integer read-only
Indicates the PC-Type of the first port that is downstream of this MAC (the exit port). Enumeration: 'a': 1, 'unknown': 5, 's': 3, 'b': 2, 'm': 4.
                   snmpFddiMACSMTAddress 1.3.6.1.2.1.10.15.2.2.1.13 fddimaclongaddresstype read-only
The 48 bit individual address of the MAC used for SMT frames.
                   snmpFddiMACTReq 1.3.6.1.2.1.10.15.2.2.1.14 fdditime read-only
The value of T-Req (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2).
                   snmpFddiMACTNeg 1.3.6.1.2.1.10.15.2.2.1.15 fdditime read-only
The value of T-Neg (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2).
                   snmpFddiMACTMax 1.3.6.1.2.1.10.15.2.2.1.16 fdditime read-only
The value of T-Max (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2).
                   snmpFddiMACTvxValue 1.3.6.1.2.1.10.15.2.2.1.17 fdditime read-only
The value of TvxValue (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2).
                   snmpFddiMACTMin 1.3.6.1.2.1.10.15.2.2.1.18 fdditime read-only
The value of T-Min (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2).
                   snmpFddiMACCurrentFrameStatus 1.3.6.1.2.1.10.15.2.2.1.19 integer read-only
A value that indicates the MAC's operational frame status setting functionality. The value is a sum. This value initially takes the value zero, then for each functionality present, 2 raised to a power is added to the sum. The powers are according to the following table: Functionality Power FSC-Type0 0 -- MAC repeats A/C indicators as received FSC-Type1 1 -- MAC sets C but not A on copying for -- forwarding FSC-Type2 2 -- MAC resets C and sets A on C set and A -- reset if frame is not copied
                   snmpFddiMACFrameCts 1.3.6.1.2.1.10.15.2.2.1.20 counter read-only
Frame_Ct (refer to ANSI MAC 2.2.1).
                   snmpFddiMACErrorCts 1.3.6.1.2.1.10.15.2.2.1.21 counter read-only
Error_Ct (refer to ANSI MAC 2.2.1).
                   snmpFddiMACLostCts 1.3.6.1.2.1.10.15.2.2.1.22 counter read-only
Lost_Ct (refer to ANSI MAC 2.2.1).
                   snmpFddiMACFrameErrorThreshold 1.3.6.1.2.1.10.15.2.2.1.23 integer read-only
A threshold for determining when a MAC Condition report should be generated. The condition is true when the ratio, ((delta snmpFddiMACLostCt + delta snmpFddiMACErrorCt) / (delta snmpFddiMACFrameCt + delta snmpFddiMACLostCt)) x 2**16. exceeds the threshold. It is used to determine when a station has an unacceptable frame error threshold. The sampling algorithm is implementation dependent. Any attempt to set this variable to a value of less than one shall result in a badValue error. Those who are familiar with the SNMP management framework will recognize that thresholds are not in keeping with the SNMP philosophy. However, this variable is supported by underlying SMT implementations already and maintaining this threshold should not pose an undue additional burden on SNMP agent implementors.
                   snmpFddiMACFrameErrorRatio 1.3.6.1.2.1.10.15.2.2.1.24 integer read-only
This attribute is the actual ratio, ((delta snmpFddiMACLostCt + delta snmpFddiMACErrorCt) / (delta snmpFddiMACFrameCt + delta snmpFddiMACLostCt)) x 2**16.
                   snmpFddiMACRMTState 1.3.6.1.2.1.10.15.2.2.1.25 integer read-only
Indicates the current state of the Ring Management state machine (refer to ANSI Section 10). Enumeration: 'rm2': 3, 'rm3': 4, 'rm0': 1, 'rm1': 2, 'rm6': 7, 'rm7': 8, 'rm4': 5, 'rm5': 6.
                   snmpFddiMACDaFlag 1.3.6.1.2.1.10.15.2.2.1.26 integer read-only
The RMT flag Duplicate Address Flag, DA_Flag (refer to ANSI 10.3.1.2). Enumeration: 'true': 1, 'false': 2.
                   snmpFddiMACUnaDaFlag 1.3.6.1.2.1.10.15.2.2.1.27 integer read-only
A flag set when the upstream neighbor reports a duplicate address condition. Reset when the condition clears. Enumeration: 'true': 1, 'false': 2.
                   snmpFddiMACFrameCondition 1.3.6.1.2.1.10.15.2.2.1.28 integer read-only
Indicates the MAC Condition is active when set. Cleared when the condition clears and on power up. Enumeration: 'true': 1, 'false': 2.
                   snmpFddiMACChipSet 1.3.6.1.2.1.10.15.2.2.1.29 object identifier read-only
This object identifies the hardware chip(s) which is (are) principally responsible for the implementation of the MAC function. A few OBJECT IDENTIFIERS are identified elsewhere in this memo. For those The assignment of additional OBJECT IDENTIFIERs to various types of hardware chip sets is managed by the IANA. For example, vendors whose chip sets are not defined in this memo may request a number from the Internet Assigned Numbers Authority (IANA) which indicates the assignment of a enterprise specific subtree which, among other things, may be used to allocate OBJECT IDENTIFIER assignments for that enterprise's chip sets. Similarly, in the absence of an appropriately assigned OBJECT IDENTIFIER in this memo or in an enterprise specific subtree of a chip vendor, a board or system vendor can request a number for a subtree from the IANA and make an appropriate assignment. It is desired that, whenever possible, the same OBJECT IDENTIFIER be used for all chips of a given type. Consequently, the assignment made in this memo for a chip, if any, should be used in preference to any other assignment and the assignment made by the chip manufacturer, if any, should be used in preference to assignments made by users of those chips. If the hardware chip set is unknown, the object identifier unknownChipSet OBJECT IDENTIFIER ::= { 0 0 } is returned. Note that unknownChipSet is a syntactically valid object identifier, and any conformant implementation of ASN.1 and the BER must be able to generate and recognize this value.
       snmpFddiPATH 1.3.6.1.2.1.10.15.3
       snmpFddiPORT 1.3.6.1.2.1.10.15.4
           snmpFddiPORTNumber 1.3.6.1.2.1.10.15.4.1 integer read-only
The total number of PORT implementations (across all SMTs) on this network management application entity. The value for this variable must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
           snmpFddiPORTTable 1.3.6.1.2.1.10.15.4.2 no-access
A list of PORT entries. The number of entries is given by the value of snmpFddiPORTNumber.
               snmpFddiPORTEntry 1.3.6.1.2.1.10.15.4.2.1 no-access
A PORT entry containing information common to a given PORT.
                   snmpFddiPORTSMTIndex 1.3.6.1.2.1.10.15.4.2.1.1 integer read-only
The value of the SMT index associated with this PORT.
                   snmpFddiPORTIndex 1.3.6.1.2.1.10.15.4.2.1.2 integer read-only
A unique value for each PORT within a given SMT. Its value ranges between 1 and the sum of the values of snmpFddiSMTNonMasterCt { snmpFddiSMTEntry 6 } and snmpFddiSMTMasterCt { snmpFddiSMTEntry 7 } on the given SMT. The value for each PORT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                   snmpFddiPORTPCType 1.3.6.1.2.1.10.15.4.2.1.3 integer read-only
PC_Type (refer to ANSI SMT 9.2.2 and ANSI SMT 9.6.3.2). Enumeration: 'a': 1, 's': 3, 'b': 2, 'm': 4.
                   snmpFddiPORTPCNeighbor 1.3.6.1.2.1.10.15.4.2.1.4 integer read-only
The type (PC_Neighbor) of the remote PORT that is determined in PC_Signaling in R_Val (1,2) (refer to ANSI SMT 9.6.3.2). Enumeration: 'a': 1, 'unknown': 5, 's': 3, 'b': 2, 'm': 4.
                   snmpFddiPORTConnectionPolicies 1.3.6.1.2.1.10.15.4.2.1.5 integer read-only
A value that indicates the node's PORT policies. Pc-MAC-LCT, Pc-MAC-Loop, and Pc-MAC-Placement indicate how the respective PC Signaling Capability flags should be set (refer to ANSI SMT 9.4.3.2). The value is a sum. This value initially takes the value zero, then for each PORT policy, 2 raised to a power is added to the sum. The powers are according to the following table: Policy Power Pc-MAC-LCT 0 Pc-MAC-Loop 1 Pc-MAC-Placement 2
                   snmpFddiPORTRemoteMACIndicated 1.3.6.1.2.1.10.15.4.2.1.6 integer read-only
The indication, in PC-Signaling that the remote partner intends to place a MAC in the output token PATH of this PORT. Signaled as R_Val (9) (refer to ANSI SMT 9.6.3.2). Enumeration: 'true': 1, 'false': 2.
                   snmpFddiPORTCEState 1.3.6.1.2.1.10.15.4.2.1.7 integer read-only
Indicates the current state of PORT's Configuration Element (CE) (refer to ANSI 9.7.5). Note that this value represents the Current Path information for this PORT. Enumeration: 'ce4': 5, 'ce3': 4, 'ce2': 3, 'ce1': 2, 'ce0': 1.
                   snmpFddiPORTPathsRequested 1.3.6.1.2.1.10.15.4.2.1.8 integer read-only
A value that indicates the desired association(s) of the port with a station PATH. The 'Primary' Path is the default. The value of 'Secondary' is only meaningful for S (slave) or M (master) PORT PC-Types. This value effects the setting of the CF_Insert_S, and CF_Insert_L flags (refer to ANSI Section 9.4.3). If the 'Primary' PATH is present, then the Primary PATH (the default PATH) is selected. If the 'Secondary' PATH is present and the 'Primary' PATH is not present, then the CF_Insert_S flag is set. If the 'Local' PATH is sent and neither the 'Primary' or 'Secondary' PATHs are sent, then the CF_Insert_L flag is set. The value is a sum. This value initially takes the value zero, then for each type of PATH desired, 2 raised to a power is added to the sum. The powers are according to the following table: Path Power Primary 0 Secondary 1 Local 2 Isolated 3
                   snmpFddiPORTMACPlacement 1.3.6.1.2.1.10.15.4.2.1.9 fddiresourceid read-only
Indicates the upstream MAC, if any, that is associated with the PORT. The value shall be zero if there is no MAC associated with the PORT. Otherwise, the value shall be equal to the value of snmpFddiMACIndex associated with the MAC.
                   snmpFddiPORTAvailablePaths 1.3.6.1.2.1.10.15.4.2.1.10 integer read-only
A value that indicates the PATH types available for M and S PORTs. The value is a sum. This value initially takes the value zero, then for each type of PATH that this port has available, 2 raised to a power is added to the sum. The powers are according to the following table: Path Power Primary 0 Secondary 1 Local 2
                   snmpFddiPORTMACLoopTime 1.3.6.1.2.1.10.15.4.2.1.11 fdditime read-write
Time for the optional MAC Local Loop, T_Next(9), which is greater-than or equal-to 200 milliseconds (refer to ANSI SMT 9.4.4.2.3).
                   snmpFddiPORTTBMax 1.3.6.1.2.1.10.15.4.2.1.12 fdditime read-only
TB_Max (refer to ANSI SMT 9.4.4.2.1).
                   snmpFddiPORTBSFlag 1.3.6.1.2.1.10.15.4.2.1.13 integer read-only
The Break State, BS_Flag (refer to ANSI SMT 9.4.3.4). Enumeration: 'true': 1, 'false': 2.
                   snmpFddiPORTLCTFailCts 1.3.6.1.2.1.10.15.4.2.1.14 counter read-only
The count of the consecutive times the link confidence test (LCT) has failed during connection management (refer to ANSI 9.4.1).
                   snmpFddiPORTLerEstimate 1.3.6.1.2.1.10.15.4.2.1.15 integer read-only
A long term average link error rate. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the exponent of the estimate.
                   snmpFddiPORTLemRejectCts 1.3.6.1.2.1.10.15.4.2.1.16 counter read-only
A link error monitoring count of the times that a link has been rejected.
                   snmpFddiPORTLemCts 1.3.6.1.2.1.10.15.4.2.1.17 counter read-only
The aggregate link error monitor error count, set to zero only on station power_up.
                   snmpFddiPORTLerCutoff 1.3.6.1.2.1.10.15.4.2.1.18 integer read-write
The link error rate estimate at which a link connection will be broken. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the exponent.
                   snmpFddiPORTLerAlarm 1.3.6.1.2.1.10.15.4.2.1.19 integer read-write
The link error rate estimate at which a link connection will generate an alarm. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the exponent of the estimate.
                   snmpFddiPORTConnectState 1.3.6.1.2.1.10.15.4.2.1.20 integer read-only
An indication of the connect state of this PORT. Basically, this gives a higher level view of the state of the connection by grouping PCM states and the PC-Withhold flag state. The supported values and their corresponding PCM states and PC-Withhold condition, when relevant, are: disabled: (PC0:Off, PC9:Maint) connecting: (PC1(Break) || PC3 (Connect) || PC4 (Next) || PC5 (Signal) || PC6 (Join) || PC7 (Verify)) && (PC_Withhold = None) standby: (NOT PC_Withhold == None) active: (PC2:Trace || PC8:Active) Enumeration: 'disabled': 1, 'standby': 3, 'connecting': 2, 'active': 4.
                   snmpFddiPORTPCMState 1.3.6.1.2.1.10.15.4.2.1.21 integer read-only
(refer to SMT 9.6.2). Enumeration: 'pc8': 9, 'pc9': 10, 'pc2': 3, 'pc3': 4, 'pc0': 1, 'pc1': 2, 'pc6': 7, 'pc7': 8, 'pc4': 5, 'pc5': 6.
                   snmpFddiPORTPCWithhold 1.3.6.1.2.1.10.15.4.2.1.22 integer read-only
PC_Withhold, (refer to ANSI SMT 9.4.1). Enumeration: 'm-m': 2, 'none': 1, 'other': 3.
                   snmpFddiPORTLerCondition 1.3.6.1.2.1.10.15.4.2.1.23 integer read-only
This variable is set to true whenever LerEstimate is less than or equal to LerAlarm. Enumeration: 'true': 1, 'false': 2.
                   snmpFddiPORTChipSet 1.3.6.1.2.1.10.15.4.2.1.24 object identifier read-only
This object identifies the hardware chip(s) which is (are) principally responsible for the implementation of the PORT (PHY) function. A few OBJECT IDENTIFIERS are identified elsewhere in this memo. For those The assignment of additional OBJECT IDENTIFIERs to various types of hardware chip sets is managed by the IANA. For example, vendors whose chip sets are not defined in this memo may request a number from the Internet Assigned Numbers Authority (IANA) which indicates the assignment of a enterprise specific subtree which, among other things, may be used to allocate OBJECT IDENTIFIER assignments for that enterprise's chip sets. Similarly, in the absence of an appropriately assigned OBJECT IDENTIFIER in this memo or in an enterprise specific subtree of a chip vendor, a board or system vendor can request a number for a subtree from the IANA and make an appropriate assignment. It is desired that, whenever possible, the same OBJECT IDENTIFIER be used for all chips of a given type. Consequently, the assignment made in this memo for a chip, if any, should be used in preference to any other assignment and the assignment made by the chip manufacturer, if any, should be used in preference to assignments made by users of those chips. If the hardware chip set is unknown, the object identifier unknownChipSet OBJECT IDENTIFIER ::= { 0 0 } is returned. Note that unknownChipSet is a syntactically valid object identifier, and any conformant implementation of ASN.1 and the BER must be able to generate and recognize this value.
                   snmpFddiPORTAction 1.3.6.1.2.1.10.15.4.2.1.25 integer read-write
This object, when read, always returns a value of other(1). The behavior of setting this variable to each of the acceptable values is as follows: Other: Results in a badValue error. maintPORT: Signal PC_Maint enablePORT: Signal PC_Enable disablePORT: Signal PC_Disable startPORT: Signal PC_Start stopPORT: Signal PC_Stop Signals cause an SM_CM_CONTROL.request service to be generated with a control_action of `Signal' and the `variable' parameter set with the appropriate value (i.e., PC_Maint, PC_Enable, PC_Disable, PC_Start, PC_Stop). Ref. ANSI SMT Section 9.3.2. Attempts to set this object to all other values results in a badValue error. Enumeration: 'startPORT': 5, 'disablePORT': 4, 'enablePORT': 3, 'other': 1, 'maintPORT': 2, 'stopPORT': 6.
       snmpFddiATTACHMENT 1.3.6.1.2.1.10.15.5
       snmpFddiChipSets 1.3.6.1.2.1.10.15.6