F3-SYNCJACK-MIB: View SNMP OID List / Download MIB

VENDOR: ADVA AG OPTICAL NETWORKING


 Home MIB: F3-SYNCJACK-MIB
Download as:   
SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI, CM-COMMON-MIB, CM-ENTITY-MIB, ADVA-MIB, F3-PTP-MIB, F3-SYNC-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 f3SyncJMIB 1.3.6.1.4.1.2544.1.12.22
This module defines the Sync Jack MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA.
       f3SyncJConfigObjects 1.3.6.1.4.1.2544.1.12.22.1
           f3SyncJClockProbeTable 1.3.6.1.4.1.2544.1.12.22.1.1 no-access
A list of entries corresponding to the SyncJack Clock Probe.
               f3SyncJClockProbeEntry 1.3.6.1.4.1.2544.1.12.22.1.1.1 no-access
An entry containing information applicable to a particular SyncJack Clock Probe.
                   f3SyncJClockProbeIndex 1.3.6.1.4.1.2544.1.12.22.1.1.1.1 integer32 no-access
Unique index value associated with the Clock Probe.
                   f3SyncJClockProbeName 1.3.6.1.4.1.2544.1.12.22.1.1.1.2 displaystring read-only
This object allows SNMP management entities to provide a name to the Clock Probe entity.
                   f3SyncJClockProbeSource 1.3.6.1.4.1.2544.1.12.22.1.1.1.3 variablepointer read-write
This object allows setting up of the TIE Source Entity. Clock Probe compares this with the f3SyncJClockProbeReference and computes TIE, MTIE.
                   f3SyncJClockProbeReference 1.3.6.1.4.1.2544.1.12.22.1.1.1.4 variablepointer read-write
This object allows setting up of the TIE Reference Entity. Clock Probe compares this with the f3SyncJClockProbeSource and computes TIE, MTIE.
                   f3SyncJClockProbeExpectedQL 1.3.6.1.4.1.2544.1.12.22.1.1.1.5 ssmqualitylevel read-write
This object represents the minimum expected Quality Level when bits-in and sync-e PHY are references.
                   f3SyncJClockProbeSourceType 1.3.6.1.4.1.2544.1.12.22.1.1.1.6 tiesourcetype read-only
This object represents the Clock Probe source type.
                   f3SyncJClockProbeMeasurementRate 1.3.6.1.4.1.2544.1.12.22.1.1.1.7 tiemeasurementrate read-only
This object represents the actual Clock Probe measurement rate.
                   f3SyncJClockProbeMTIEMaskType 1.3.6.1.4.1.2544.1.12.22.1.1.1.8 mtiemasktype read-write
This object represents the MTIE Mask Type.
                   f3SyncJClockProbeMTIEMaskMargin 1.3.6.1.4.1.2544.1.12.22.1.1.1.9 unsigned32 read-write
This object specifies the MTIE Mask Margin in percentage below the MTIE mask for alarm report. Value of 0 means no margin.
                   f3SyncJClockProbeScheduler 1.3.6.1.4.1.2544.1.12.22.1.1.1.10 variablepointer read-only
This object provides the associated scheduler instance, if one exists, with this Clock Probe. This value is 0.0, if there is no scheduler associated with the Clock Probe.
                   f3SyncJClockProbeTestState 1.3.6.1.4.1.2544.1.12.22.1.1.1.11 syncjackteststate read-only
This object provides the Clock Probe test state.
                   f3SyncJClockProbeLastTIEResult 1.3.6.1.4.1.2544.1.12.22.1.1.1.12 integer32 read-only
This object provides last TIE result in nanoseconds.
                   f3SyncJClockProbeLastTIEResultTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.13 dateandtime read-only
This object provides the time associated with the last TIE result.
                   f3SyncJClockProbeSourceFailure 1.3.6.1.4.1.2544.1.12.22.1.1.1.14 truthvalue read-only
This object provides information on whether the source failed.
                   f3SyncJClockProbeReferenceFailure 1.3.6.1.4.1.2544.1.12.22.1.1.1.15 truthvalue read-only
This object provides information on whether the reference failed.
                   f3SyncJClockProbeActualTestStartTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.16 dateandtime read-only
This object provides information on the actual test start time.
                   f3SyncJClockProbeActualTestDuration 1.3.6.1.4.1.2544.1.12.22.1.1.1.17 unsigned32 read-only
This object provides information on the actual test duration in seconds.
                   f3SyncJClockProbeMTIEMaskCrossedTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.18 dateandtime read-only
This object provides the time when the MTIE mask was crossed.
                   f3SyncJClockProbeMTIEMaskMarginCrossedTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.19 dateandtime read-only
This object provides the time when the MTIE mask margin was crossed.
                   f3SyncJClockProbeStatusMTIEMaskFailed 1.3.6.1.4.1.2544.1.12.22.1.1.1.20 truthvalue read-only
This object provides the result status, whether MTIE Mask has failed.
                   f3SyncJClockProbeStatusMTIEMarginFailed 1.3.6.1.4.1.2544.1.12.22.1.1.1.21 truthvalue read-only
This object provides the result status, whether MTIE Margin has failed.
                   f3SyncJClockProbeStorageType 1.3.6.1.4.1.2544.1.12.22.1.1.1.22 storagetype read-only
The type of storage configured for this entry.
                   f3SyncJClockProbeRowStatus 1.3.6.1.4.1.2544.1.12.22.1.1.1.23 rowstatus read-only
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncJClockProbeRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncJClockProbeRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SyncJClockProbeRowStatus object may be modified if the associated instance of this object is equal to active(1).
                   f3SyncJClockProbeFfoTarget 1.3.6.1.4.1.2544.1.12.22.1.1.1.24 integer32 read-write
The FFO target for this entry.
                   f3SyncJClockProbeFfoObserWindow 1.3.6.1.4.1.2544.1.12.22.1.1.1.25 ffoobserwindow read-write
The FFO obserwer window for this entry.
                   f3SyncJClockProbeLastFFOResult 1.3.6.1.4.1.2544.1.12.22.1.1.1.26 integer32 read-only
The last FFO result for this entry.
                   f3SyncJClockProbeTimeOfLastFFOResult 1.3.6.1.4.1.2544.1.12.22.1.1.1.27 dateandtime read-only
The time of last FFO result for this entry.
                   f3SyncJClockProbeRawDataCollectionEnabled 1.3.6.1.4.1.2544.1.12.22.1.1.1.28 truthvalue read-write
The raw data collection enabled for this entry.
                   f3SyncJClockProbeTeAlertThreshold 1.3.6.1.4.1.2544.1.12.22.1.1.1.29 integer32 read-write
The TE alert threshold configured for this entry.
                   f3SyncJClockProbeTeAlertClearThreshold 1.3.6.1.4.1.2544.1.12.22.1.1.1.30 integer32 read-write
The TE alert clear threshold configured for this entry.
                   f3SyncJClockProbeLastTEAlertTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.31 dateandtime read-only
The last TE alert time for this entry.
                   f3SyncJClockProbeLastTEAlertClearTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.32 dateandtime read-only
The last TE alert clear time for this entry.
                   f3SyncJClockProbeRunningFailedCount 1.3.6.1.4.1.2544.1.12.22.1.1.1.33 integer32 read-only
The running failed count for this entry.
                   f3SyncJClockProbeMeasurementType 1.3.6.1.4.1.2544.1.12.22.1.1.1.34 measurementtype read-write
The measurement type configured for this entry.
                   f3SyncJClockProbeConstTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.1.1.35 unsigned32 read-write
The Constant Time Error Alert threshold (ns).
                   f3SyncJClockProbeConstTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.1.1.36 unsigned32 read-write
The Constant Time Error Alert Clear threshold (ns).
                   f3SyncJClockProbeConstTEWindow 1.3.6.1.4.1.2544.1.12.22.1.1.1.37 unsigned32 read-write
The Averaging window used for Constant TE calculation (sec).
                   f3SyncJClockProbeMaxTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.38 unsigned32 read-only
The Total time in seconds Max TE has been measured
                   f3SyncJClockProbeConstTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.39 unsigned32 read-only
The Total time in seconds Constant TE has been measured.
                   f3SyncJClockProbeConstTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.40 unsigned32 read-only
The Const TE Measurement Time for this entry.
                   f3SyncJClockProbeMaxTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.41 unsigned32 read-only
The Max TE Measurement Time for this entry.
                   f3SyncJClockProbeMaxTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.1.1.42 integer32 read-write
The TE Max threshold configured for this entry.
                   f3SyncJClockProbeMaxTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.1.1.43 integer32 read-write
The TE Max clear threshold configured for this entry.
                   f3SyncJClockProbeMTIERestart 1.3.6.1.4.1.2544.1.12.22.1.1.1.44 truthvalue read-write
The MTIE Restart configured for this entry.
           f3SyncJClockProbeMTIEValueTable 1.3.6.1.4.1.2544.1.12.22.1.2 no-access
A list of entries corresponding to the Clock Probe's MTIE Result Values.
               f3SyncJClockProbeMTIEValueEntry 1.3.6.1.4.1.2544.1.12.22.1.2.1 no-access
An entry containing information applicable to a particular Clock Probe's MTIE Result Value.
                   f3SyncJClockProbeMTIEValueIndex 1.3.6.1.4.1.2544.1.12.22.1.2.1.1 integer32 no-access
Unique index value associated with the Clock Probe Result Value.
                   f3SyncJClockProbeMTIEValue 1.3.6.1.4.1.2544.1.12.22.1.2.1.2 integer32 read-only
This object allows SNMP management entities to retrieve MTIE Result Values in nanoseconds.
           f3SyncJClockProbeResHistoryTable 1.3.6.1.4.1.2544.1.12.22.1.3 no-access
A list of entries corresponding to the SyncJack Clock Probe Result History.
               f3SyncJClockProbeResHistoryEntry 1.3.6.1.4.1.2544.1.12.22.1.3.1 no-access
An entry containing information applicable to a particular SyncJack Clock Probe Result History.
                   f3SyncJClockProbeResHistoryIndex 1.3.6.1.4.1.2544.1.12.22.1.3.1.1 integer32 no-access
Unique index value associated with the Clock Probe.
                   f3SyncJClockProbeResHistoryAlias 1.3.6.1.4.1.2544.1.12.22.1.3.1.2 displaystring read-write
This object provides alias of the Clock Probe result history.
                   f3SyncJClockProbeResHistorySource 1.3.6.1.4.1.2544.1.12.22.1.3.1.3 variablepointer read-only
This object provides the source for TIE computation.
                   f3SyncJClockProbeResHistoryReference 1.3.6.1.4.1.2544.1.12.22.1.3.1.4 variablepointer read-only
This object provides the reference for TIE computation.
                   f3SyncJClockProbeResHistoryExpectedQL 1.3.6.1.4.1.2544.1.12.22.1.3.1.5 ssmqualitylevel read-only
This object provides the minimum expected Quality Level when bits-in and sync-e PHY are references.
                   f3SyncJClockProbeResHistorySourceType 1.3.6.1.4.1.2544.1.12.22.1.3.1.6 tiesourcetype read-only
This object provides the Clock Probe source type.
                   f3SyncJClockProbeResHistoryMeasurementRate 1.3.6.1.4.1.2544.1.12.22.1.3.1.7 tiemeasurementrate read-only
This object provides the actual Clock Probe measurement rate.
                   f3SyncJClockProbeResHistoryMTIEMaskType 1.3.6.1.4.1.2544.1.12.22.1.3.1.8 mtiemasktype read-only
This object provides the MTIE Mask Type.
                   f3SyncJClockProbeResHistoryMTIEMaskMargin 1.3.6.1.4.1.2544.1.12.22.1.3.1.9 unsigned32 read-only
This object provides the MTIE Mask Margin.
                   f3SyncJClockProbeResHistorySourceFailure 1.3.6.1.4.1.2544.1.12.22.1.3.1.10 truthvalue read-only
This object provides information on whether the source failed.
                   f3SyncJClockProbeResHistoryReferenceFailure 1.3.6.1.4.1.2544.1.12.22.1.3.1.11 truthvalue read-only
This object provides information on whether the reference failed.
                   f3SyncJClockProbeResHistoryActualTestStartTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.12 dateandtime read-only
This object provides information on the actual test start time.
                   f3SyncJClockProbeResHistoryActualTestDuration 1.3.6.1.4.1.2544.1.12.22.1.3.1.13 unsigned32 read-only
This object provides information on the actual test duration in seconds.
                   f3SyncJClockProbeResHistoryMTIEMaskCrossedTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.14 dateandtime read-only
This object provides the time when the MTIE mask was crossed.
                   f3SyncJClockProbeResHistoryMTIEMaskMarginCrossedTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.15 dateandtime read-only
This object provides the time when the MTIE mask margin was crossed.
                   f3SyncJClockProbeResHistoryStatusMTIEMaskFailed 1.3.6.1.4.1.2544.1.12.22.1.3.1.16 truthvalue read-only
This object provides the result status, whether MTIE Mask has failed.
                   f3SyncJClockProbeResHistoryStatusMTIEMarginFailed 1.3.6.1.4.1.2544.1.12.22.1.3.1.17 truthvalue read-only
This object provides the result status, whether MTIE Margin has failed.
                   f3SyncJClockProbeResHistoryStorageType 1.3.6.1.4.1.2544.1.12.22.1.3.1.18 storagetype read-only
The type of storage configured for this entry.
                   f3SyncJClockProbeResHistoryRowStatus 1.3.6.1.4.1.2544.1.12.22.1.3.1.19 rowstatus read-only
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncJClockProbeResHistoryRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncJClockProbeResHistoryRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SyncJClockProbeResHistoryRowStatus object may be modified if the associated instance of this object is equal to active(1).
                   f3SyncJClockProbeResHistoryMinFFO 1.3.6.1.4.1.2544.1.12.22.1.3.1.20 integer32 read-only
The Min FFO configured for this entry.
                   f3SyncJClockProbeResHistoryMaxFFO 1.3.6.1.4.1.2544.1.12.22.1.3.1.21 integer32 read-only
The Max FFO configured for this entry.
                   f3SyncJClockProbeResHistoryAvgFFO 1.3.6.1.4.1.2544.1.12.22.1.3.1.22 integer32 read-only
The average FFO configured for this entry.
                   f3SyncJClockProbeResHistoryOutOfTargetFFOTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.23 integer32 read-only
The out of target FFO time configured for this entry.
                   f3SyncJClockProbeResHistoryTotalFFOTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.24 integer32 read-only
The total FFO time configured for this entry.
                   f3SyncJClockProbeResHistoryMinPhaseOffset 1.3.6.1.4.1.2544.1.12.22.1.3.1.25 integer32 read-only
The Min phase offset configured for this entry.
                   f3SyncJClockProbeResHistoryMaxPhaseOffset 1.3.6.1.4.1.2544.1.12.22.1.3.1.26 integer32 read-only
The Max phase offset configured for this entry.
                   f3SyncJClockProbeResHistoryAvgPhaseOffset 1.3.6.1.4.1.2544.1.12.22.1.3.1.27 integer32 read-only
The average phase offset configured for this entry.
                   f3SyncJClockProbeResHistoryOutOfTargetPhaseOffsetTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.28 integer32 read-only
The out of target phase offset time configured for this entry.
                   f3SyncJClockProbeResHistoryTotalPhaseOffsetTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.29 integer32 read-only
The total phase offset time configured for this entry.
                   f3SyncJClockProbeResHistoryMeasurementType 1.3.6.1.4.1.2544.1.12.22.1.3.1.30 measurementtype read-only
The measurement type configured for this entry.
                   f3SyncJClockProbeResHistoryTeAlertThreshold 1.3.6.1.4.1.2544.1.12.22.1.3.1.31 integer32 read-only
The TE alert threshold configured for this entry.
                   f3SyncJClockProbeResHistoryTeAlertClearThreshold 1.3.6.1.4.1.2544.1.12.22.1.3.1.32 integer32 read-only
The TE alert clear threshold configured for this entry.
                   f3SyncJClockProbeResHistoryLastTEAlertTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.33 dateandtime read-only
The last TE alert time for this entry.
                   f3SyncJClockProbeResHistoryLastTEAlertClearTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.34 dateandtime read-only
The last TE alert clear time for this entry.
                   f3SyncJClockProbeResHistoryRunningFailedCount 1.3.6.1.4.1.2544.1.12.22.1.3.1.35 integer32 read-only
The running failed count for this entry.
                   f3SyncJClockProbeResHistoryConstTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.3.1.36 unsigned32 read-only
The Constant Time Error Alert threshold (ns).
                   f3SyncJClockProbeResHistoryConstTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.3.1.37 unsigned32 read-only
The Constant Time Error Alert Clear threshold (ns).
                   f3SyncJClockProbeResHistoryConstTEWindow 1.3.6.1.4.1.2544.1.12.22.1.3.1.38 unsigned32 read-only
The Averaging window used for Constant TE calculation (sec).
                   f3SyncJClockProbeResHistoryMaxTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.39 unsigned32 read-only
The Total time in seconds Max TE has been measured
                   f3SyncJClockProbeResHistoryConstTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.40 unsigned32 read-only
The Total time in seconds Constant TE has been measured.
                   f3SyncJClockProbeResHistoryConstTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.41 unsigned32 read-only
The Const TE Measurement Time for this entry.
                   f3SyncJClockProbeResHistoryMaxTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.42 unsigned32 read-only
The Max TE Measurement Time for this entry.
                   f3SyncJClockProbeResHistoryMaxTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.3.1.43 integer32 read-write
The TE Max threshold configured for this entry.
                   f3SyncJClockProbeResHistoryMaxTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.3.1.44 integer32 read-write
The TE Max clear threshold configured for this entry.
           f3SyncJClockProbeResHistoryMTIEValueTable 1.3.6.1.4.1.2544.1.12.22.1.4 no-access
A list of histgory entries corresponding to the Clock Probe's MTIE Result Values.
               f3SyncJClockProbeResHistoryMTIEValueEntry 1.3.6.1.4.1.2544.1.12.22.1.4.1 no-access
An entry containing information applicable to a particular Clock Probe's MTIE Result Value.
                   f3SyncJClockProbeResHistoryMTIEValueIndex 1.3.6.1.4.1.2544.1.12.22.1.4.1.1 integer32 no-access
Unique index value associated with the Clock Probe History Result Value.
                   f3SyncJClockProbeResHistoryMTIEValue 1.3.6.1.4.1.2544.1.12.22.1.4.1.2 integer32 read-only
This object allows SNMP management entities to retrieve MTIE Result Values in nanoseconds.
           f3SyncJPTPClockProbeTable 1.3.6.1.4.1.2544.1.12.22.1.5 no-access
A list of entries corresponding to the SyncJack PTP Clock Probes.
               f3SyncJPTPClockProbeEntry 1.3.6.1.4.1.2544.1.12.22.1.5.1 no-access
An entry containing information applicable to a particular SyncJack PTP Clock Probe.
                   f3SyncJPTPClockProbeIndex 1.3.6.1.4.1.2544.1.12.22.1.5.1.1 integer32 no-access
Unique index value associated with the PTP Clock Probe.
                   f3SyncJPTPClockProbeName 1.3.6.1.4.1.2544.1.12.22.1.5.1.2 displaystring read-only
This object allows SNMP management entities to provide an name to the PTP Clock Probe entity. This is used for creation of the underlying IP Interface associated with the PTP Clock Probe entity.
                   f3SyncJPTPClockProbeMeasurementDirection 1.3.6.1.4.1.2544.1.12.22.1.5.1.3 ptpmeasurementdirection read-write
This object allows SNMP management entities to specify the Measurement Direction to the PTP Clock Probe entity.
                   f3SyncJPTPClockProbePTPFlowPoint 1.3.6.1.4.1.2544.1.12.22.1.5.1.4 variablepointer read-only
This object allows SNMP management entities to specify the PTP Flow Point to use as source for PTP Clock Probe measurements.
                   f3SyncJPTPClockProbeIpPrototocol 1.3.6.1.4.1.2544.1.12.22.1.5.1.5 ipversion read-write
This object allows SNMP management entities to specify the IP Protocol used for PTP communication.
                   f3SyncJPTPClockProbeSlaveIpV4Address 1.3.6.1.4.1.2544.1.12.22.1.5.1.6 ipaddress read-write
This object allows SNMP management entities to specify the Slave IP Address associated with the PTP Clock Probe.
                   f3SyncJPTPClockProbeMasterIpV4Address 1.3.6.1.4.1.2544.1.12.22.1.5.1.7 ipaddress read-write
This object allows SNMP management entities to specify the Master IP Address associated with the PTP Clock Probe.
                   f3SyncJPTPClockProbeReference 1.3.6.1.4.1.2544.1.12.22.1.5.1.8 variablepointer read-write
This object allows setting up of the PTP Clock Probe TIE Reference Entity. PTP Clock Probe compares this with the PTP Master/Slave entity configured using f3SyncJPTPClockProbeMasterIpV4Address/f3SyncJPTPClockProbeSlaveIpV4Address and computes TIE, MTIE.
                   f3SyncJPTPClockProbeExpectedQL 1.3.6.1.4.1.2544.1.12.22.1.5.1.9 ssmqualitylevel read-write
This object represents the minimum expected Quality Level when bits-in and sync-e PHY are references.
                   f3SyncJPTPClockProbeMTIEMaskType 1.3.6.1.4.1.2544.1.12.22.1.5.1.10 mtiemasktype read-write
This object represents the MTIE Mask Type.
                   f3SyncJPTPClockProbeMTIEMaskMargin 1.3.6.1.4.1.2544.1.12.22.1.5.1.11 unsigned32 read-write
This object represents the MTIE Mask Margin.
                   f3SyncJPTPClockProbeScheduler 1.3.6.1.4.1.2544.1.12.22.1.5.1.12 variablepointer read-only
This object provides the associated scheduler instance, if one exists, with this PTP Clock Probe. This value is 0.0, if there is no scheduler associated with the PTP Clock Probe.
                   f3SyncJPTPClockProbeTestState 1.3.6.1.4.1.2544.1.12.22.1.5.1.13 syncjackteststate read-only
This object provides the PTP Clock Probe test state.
                   f3SyncJPTPClockProbeLastTIEResult 1.3.6.1.4.1.2544.1.12.22.1.5.1.14 integer32 read-only
This object provides last TIE result in nanoseconds.
                   f3SyncJPTPClockProbeLastTIEResultTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.15 dateandtime read-only
This object provides the time associated with the last TIE result.
                   f3SyncJPTPClockProbeNoTimestampFailure 1.3.6.1.4.1.2544.1.12.22.1.5.1.16 truthvalue read-only
This object provides information on whether the measured PTP source indicated a no-timestamp failure.
                   f3SyncJPTPClockProbeNoEventMessageFailure 1.3.6.1.4.1.2544.1.12.22.1.5.1.17 truthvalue read-only
This object provides information on whether the measured PTP source indicated a no-event message failure.
                   f3SyncJPTPClockProbeReferenceFailure 1.3.6.1.4.1.2544.1.12.22.1.5.1.18 truthvalue read-only
This object provides information on whether the reference failed.
                   f3SyncJPTPClockProbeActualTestStartTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.19 dateandtime read-only
This object provides information on the actual test start time.
                   f3SyncJPTPClockProbeActualTestDuration 1.3.6.1.4.1.2544.1.12.22.1.5.1.20 unsigned32 read-only
This object provides information on the actual test duration in seconds.
                   f3SyncJPTPClockProbeMTIEMaskCrossedTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.21 dateandtime read-only
This object provides the time when the MTIE mask was crossed.
                   f3SyncJPTPClockProbeMTIEMaskMarginCrossedTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.22 dateandtime read-only
This object provides the time when the MTIE mask margin was crossed.
                   f3SyncJPTPClockProbeStatusMTIEMaskFailed 1.3.6.1.4.1.2544.1.12.22.1.5.1.23 truthvalue read-only
This object provides the result status, whether MTIE Mask has failed.
                   f3SyncJPTPClockProbeStatusMTIEMarginFailed 1.3.6.1.4.1.2544.1.12.22.1.5.1.24 truthvalue read-only
This object provides the result status, whether MTIE Margin has failed.
                   f3SyncJPTPClockProbeStorageType 1.3.6.1.4.1.2544.1.12.22.1.5.1.25 storagetype read-only
The type of storage configured for this entry.
                   f3SyncJPTPClockProbeRowStatus 1.3.6.1.4.1.2544.1.12.22.1.5.1.26 rowstatus read-only
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncJPTPClockProbeRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncJPTPClockProbeRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SyncJPTPClockProbeRowStatus object may be modified if the associated instance of this object is equal to active(1).
                   f3SyncJPTPClockProbeFfoTarget 1.3.6.1.4.1.2544.1.12.22.1.5.1.27 integer32 read-write
The FFO target for this entry.
                   f3SyncJPTPClockProbeFfoObserWindow 1.3.6.1.4.1.2544.1.12.22.1.5.1.28 ffoobserwindow read-write
The FFO obserwer window for this entry.
                   f3SyncJPTPClockProbeLastFFOResult 1.3.6.1.4.1.2544.1.12.22.1.5.1.29 integer32 read-only
The last FFO result for this entry.
                   f3SyncJPTPClockProbeTimeOfLastFFOResult 1.3.6.1.4.1.2544.1.12.22.1.5.1.30 dateandtime read-only
The time of last FFO result for this entry.
                   f3SyncJPTPClockProbeRawDataCollectionEnabled 1.3.6.1.4.1.2544.1.12.22.1.5.1.31 truthvalue read-write
The raw data collection enabled for this entry.
                   f3SyncJPTPClockProbeTeAlertThreshold 1.3.6.1.4.1.2544.1.12.22.1.5.1.32 integer32 read-write
The TE alert threshold configured for this entry.
                   f3SyncJPTPClockProbeTeAlertClearThreshold 1.3.6.1.4.1.2544.1.12.22.1.5.1.33 integer32 read-write
The TE alert clear threshold configured for this entry.
                   f3SyncJPTPClockProbeLastTEAlertTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.34 dateandtime read-only
The last TE alert time for this entry.
                   f3SyncJPTPClockProbeLastTEAlertClearTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.35 dateandtime read-only
The last TE alert clear time for this entry.
                   f3SyncJPTPClockProbeRunningFailedCount 1.3.6.1.4.1.2544.1.12.22.1.5.1.36 integer32 read-only
The running failed count for this entry.
                   f3SyncJPTPClockProbeMeasurementType 1.3.6.1.4.1.2544.1.12.22.1.5.1.37 measurementtype read-write
The measurement type configured for this entry.
                   f3SyncJPTPClockProbeDelayMS 1.3.6.1.4.1.2544.1.12.22.1.5.1.38 integer32 read-write
The delay MS for this entry.
                   f3SyncJPTPClockProbeDelaySM 1.3.6.1.4.1.2544.1.12.22.1.5.1.39 integer32 read-write
The delay SM for this entry.
                   f3SyncJPTPClockProbeTAsymmetry 1.3.6.1.4.1.2544.1.12.22.1.5.1.40 integer32 read-write
The Slave to Master Delay Asymmetry configured for this entity.
                   f3SyncJPTPClockProbeDelayCompensation 1.3.6.1.4.1.2544.1.12.22.1.5.1.41 integer32 read-write
The Delay Compensation configured for this entity.
                   f3SyncJPTPClockProbeConstTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.5.1.42 unsigned32 read-write
The Constant Time Error Alert threshold (ns).
                   f3SyncJPTPClockProbeConstTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.5.1.43 unsigned32 read-write
The Constant Time Error Alert Clear threshold (ns).
                   f3SyncJPTPClockProbeConstTEWindow 1.3.6.1.4.1.2544.1.12.22.1.5.1.44 unsigned32 read-write
The Averaging window used for Constant TE calculation (sec).
                   f3SyncJPTPClockProbeInstTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.5.1.45 unsigned32 read-write
The Instant Time Error Alert threshold (ns).
                   f3SyncJPTPClockProbeInstTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.5.1.46 unsigned32 read-write
The Instant Time Error Alert Clear threshold (ns).
                   f3SyncJPTPClockProbeMaxTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.47 unsigned32 read-only
The Total time in seconds Max TE has been measured
                   f3SyncJPTPClockProbeConstTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.48 unsigned32 read-only
The Total time in seconds Constant TE has been measured.
                   f3SyncJPTPClockProbeInstTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.49 unsigned32 read-only
The Total time in seconds Instant TE has been measured.
                   f3SyncJPTPClockProbeSlavePortIdentity 1.3.6.1.4.1.2544.1.12.22.1.5.1.50 displaystring read-write
The Tested Slave Port Identity.
                   f3SyncJPTPClockProbeMasterPortIdentity 1.3.6.1.4.1.2544.1.12.22.1.5.1.51 displaystring read-write
The Tested Master Port Identity.
                   f3SyncJPTPClockProbeConstTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.52 unsigned32 read-only
The Const TE Measurement Time for this entry.
                   f3SyncJPTPClockProbeMaxTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.53 unsigned32 read-only
The Max TE Measurement Time for this entry.
                   f3SyncJPTPClockProbeInstTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.54 unsigned32 read-only
The Inst TE Measurement Time for this entry.
                   f3SyncJPTPClockProbeMaxTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.5.1.55 integer32 read-write
The TE Max threshold configured for this entry.
                   f3SyncJPTPClockProbeMaxTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.5.1.56 integer32 read-write
The TE Max clear threshold configured for this entry.
                   f3SyncJPTPClockProbeMTIERestart 1.3.6.1.4.1.2544.1.12.22.1.5.1.57 truthvalue read-write
The MTIE Restart configured for this entry.
           f3SyncJPTPClockProbeMTIEValueTable 1.3.6.1.4.1.2544.1.12.22.1.6 no-access
A list of entries corresponding to the PTP Clock Probe's MTIE Result Values.
               f3SyncJPTPClockProbeMTIEValueEntry 1.3.6.1.4.1.2544.1.12.22.1.6.1 no-access
An entry containing information applicable to a particular PTP Clock Probe's MTIE Result Value.
                   f3SyncJPTPClockProbeMTIEValueIndex 1.3.6.1.4.1.2544.1.12.22.1.6.1.1 integer32 no-access
Unique index value associated with the PTP Clock Probe Result Value.
                   f3SyncJPTPClockProbeMTIEValue 1.3.6.1.4.1.2544.1.12.22.1.6.1.2 integer32 read-only
This object allows SNMP management entities to retrieve MTIE Result Values in nanoseconds.
           f3SyncJPTPClockProbeResHistoryTable 1.3.6.1.4.1.2544.1.12.22.1.7 no-access
A list of entries corresponding to the SyncJack PTP Clock Probe Result History.
               f3SyncJPTPClockProbeResHistoryEntry 1.3.6.1.4.1.2544.1.12.22.1.7.1 no-access
An entry containing information applicable to a particular SyncJack PTP Clock Probe Result History.
                   f3SyncJPTPClockProbeResHistoryIndex 1.3.6.1.4.1.2544.1.12.22.1.7.1.1 integer32 no-access
Unique index value associated with the PTP Clock Probe.
                   f3SyncJPTPClockProbeResHistoryAlias 1.3.6.1.4.1.2544.1.12.22.1.7.1.2 displaystring read-write
This object provides alias of the PTP Clock Probe result history.
                   f3SyncJPTPClockProbeResHistoryMeasurementDirection 1.3.6.1.4.1.2544.1.12.22.1.7.1.3 ptpmeasurementdirection read-only
This object specifies the Measurement Direction to the PTP Clock Probe entity.
                   f3SyncJPTPClockProbeResHistoryPTPFlowPoint 1.3.6.1.4.1.2544.1.12.22.1.7.1.4 variablepointer read-only
This object indicates the PTP Flow Point used as source for PTP Clock Probe measurements.
                   f3SyncJPTPClockProbeResHistoryIpPrototocol 1.3.6.1.4.1.2544.1.12.22.1.7.1.5 ipversion read-only
This object indicates the IP Protocol used for PTP communication.
                   f3SyncJPTPClockProbeResHistorySlaveIpV4Address 1.3.6.1.4.1.2544.1.12.22.1.7.1.6 ipaddress read-only
This object indicates the Slave IP Address associated with the PTP Clock Probe.
                   f3SyncJPTPClockProbeResHistoryMasterIpV4Address 1.3.6.1.4.1.2544.1.12.22.1.7.1.7 ipaddress read-only
This object indicates the Master IP Address associated with the PTP Clock Probe.
                   f3SyncJPTPClockProbeResHistoryReference 1.3.6.1.4.1.2544.1.12.22.1.7.1.8 variablepointer read-only
This object indicates the PTP Clock Probe PTP Clock Probe Entity. PTP Clock Probe compares this with the PTP Master/Slave entity configured using f3SyncJPTPClockProbeMasterIpV4Address/f3SyncJPTPClockProbeSlaveIpV4Address and computes TIE, MTIE.
                   f3SyncJPTPClockProbeResHistoryExpectedQL 1.3.6.1.4.1.2544.1.12.22.1.7.1.9 ssmqualitylevel read-only
This object represents the minimum expected Quality Level when bits-in and sync-e PHY are references.
                   f3SyncJPTPClockProbeResHistoryMTIEMaskType 1.3.6.1.4.1.2544.1.12.22.1.7.1.10 mtiemasktype read-only
This object represents the MTIE Mask Type.
                   f3SyncJPTPClockProbeResHistoryMTIEMaskMargin 1.3.6.1.4.1.2544.1.12.22.1.7.1.11 unsigned32 read-only
This object represents the MTIE Mask Margin.
                   f3SyncJPTPClockProbeResHistoryNoTimestampFailure 1.3.6.1.4.1.2544.1.12.22.1.7.1.12 truthvalue read-only
This object provides information on whether the measured PTP source indicated a no-timestamp failure.
                   f3SyncJPTPClockProbeResHistoryNoEventMessageFailure 1.3.6.1.4.1.2544.1.12.22.1.7.1.13 truthvalue read-only
This object provides information on whether the measured PTP source indicated a no-event message failure.
                   f3SyncJPTPClockProbeResHistoryReferenceFailure 1.3.6.1.4.1.2544.1.12.22.1.7.1.14 truthvalue read-only
This object provides information on whether the reference failed.
                   f3SyncJPTPClockProbeResHistoryActualTestStartTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.15 dateandtime read-only
This object provides the time when the actual test was started.
                   f3SyncJPTPClockProbeResHistoryActualTestDuration 1.3.6.1.4.1.2544.1.12.22.1.7.1.16 unsigned32 read-only
This object provides information on the actual test duration in seconds.
                   f3SyncJPTPClockProbeResHistoryMTIEMaskCrossedTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.17 dateandtime read-only
This object provides the time when the MTIE mask was crossed.
                   f3SyncJPTPClockProbeResHistoryMTIEMaskMarginCrossedTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.18 dateandtime read-only
This object provides the time when the MTIE mask margin was crossed.
                   f3SyncJPTPClockProbeResHistoryStatusMTIEMaskFailed 1.3.6.1.4.1.2544.1.12.22.1.7.1.19 truthvalue read-only
This object provides the result status, whether MTIE Mask has failed.
                   f3SyncJPTPClockProbeResHistoryStatusMTIEMarginFailed 1.3.6.1.4.1.2544.1.12.22.1.7.1.20 truthvalue read-only
This object provides the result status, whether MTIE Margin has failed.
                   f3SyncJPTPClockProbeResHistoryStorageType 1.3.6.1.4.1.2544.1.12.22.1.7.1.21 storagetype read-only
The type of storage configured for this entry.
                   f3SyncJPTPClockProbeResHistoryRowStatus 1.3.6.1.4.1.2544.1.12.22.1.7.1.22 rowstatus read-only
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncJPTPClockProbeResHistoryRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncJPTPClockProbeResHistoryRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SyncJPTPClockProbeResHistoryRowStatus object may be modified if the associated instance of this object is equal to active(1).
                   f3SyncJPTPClockProbeResHistoryMinFFO 1.3.6.1.4.1.2544.1.12.22.1.7.1.23 integer32 read-only
The Min FFO configured for this entry.
                   f3SyncJPTPClockProbeResHistoryMaxFFO 1.3.6.1.4.1.2544.1.12.22.1.7.1.24 integer32 read-only
The Max FFO configured for this entry.
                   f3SyncJPTPClockProbeResHistoryAvgFFO 1.3.6.1.4.1.2544.1.12.22.1.7.1.25 integer32 read-only
The average FFO configured for this entry.
                   f3SyncJPTPClockProbeResHistoryOutOfTargetFFOTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.26 integer32 read-only
The out of target FFO time configured for this entry.
                   f3SyncJPTPClockProbeResHistoryTotalFFOTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.27 integer32 read-only
The total FFO time configured for this entry.
                   f3SyncJPTPClockProbeResHistoryMinPhaseOffset 1.3.6.1.4.1.2544.1.12.22.1.7.1.28 integer32 read-only
The Min phase offset configured for this entry.
                   f3SyncJPTPClockProbeResHistoryMaxPhaseOffset 1.3.6.1.4.1.2544.1.12.22.1.7.1.29 integer32 read-only
The Max phase offset configured for this entry.
                   f3SyncJPTPClockProbeResHistoryAvgPhaseOffset 1.3.6.1.4.1.2544.1.12.22.1.7.1.30 integer32 read-only
The average phase offset configured for this entry.
                   f3SyncJPTPClockProbeResHistoryOutOfTargetPhaseOffsetTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.31 integer32 read-only
The out of target phase offset time configured for this entry.
                   f3SyncJPTPClockProbeResHistoryTotalPhaseOffsetTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.32 integer32 read-only
The total phase offset time configured for this entry.
                   f3SyncJPTPClockProbeResHistoryTeAlertThreshold 1.3.6.1.4.1.2544.1.12.22.1.7.1.33 integer32 read-only
The TE alert threshold configured for this entry.
                   f3SyncJPTPClockProbeResHistoryTeAlertClearThreshold 1.3.6.1.4.1.2544.1.12.22.1.7.1.34 integer32 read-only
The TE alert clear threshold configured for this entry.
                   f3SyncJPTPClockProbeResHistoryLastTEAlertTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.35 dateandtime read-only
The last TE alert time for this entry.
                   f3SyncJPTPClockProbeResHistoryLastTEAlertClearTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.36 dateandtime read-only
The last TE alert clear time for this entry.
                   f3SyncJPTPClockProbeResHistoryRunningFailedCount 1.3.6.1.4.1.2544.1.12.22.1.7.1.37 integer32 read-only
The running failed count for this entry.
                   f3SyncJPTPClockProbeResHistoryMeasurementType 1.3.6.1.4.1.2544.1.12.22.1.7.1.38 measurementtype read-only
The measurement type configured for this entry.
                   f3SyncJPTPClockProbeResHistoryConstTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.7.1.39 unsigned32 read-only
The Constant Time Error Alert threshold (ns).
                   f3SyncJPTPClockProbeResHistoryConstTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.7.1.40 unsigned32 read-only
The Constant Time Error Alert Clear threshold (ns).
                   f3SyncJPTPClockProbeResHistoryConstTEWindow 1.3.6.1.4.1.2544.1.12.22.1.7.1.41 unsigned32 read-only
The Averaging window used for Constant TE calculation (sec).
                   f3SyncJPTPClockProbeResHistoryInstTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.7.1.42 unsigned32 read-only
The Instant Time Error Alert threshold (ns).
                   f3SyncJPTPClockProbeResHistoryInstTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.7.1.43 unsigned32 read-only
The Instant Time Error Alert Clear threshold (ns).
                   f3SyncJPTPClockProbeResHistoryMaxTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.44 unsigned32 read-only
The Total time in seconds Max TE has been measured
                   f3SyncJPTPClockProbeResHistoryConstTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.45 unsigned32 read-only
The Total time in seconds Constant TE has been measured.
                   f3SyncJPTPClockProbeResHistoryInstTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.46 unsigned32 read-only
The Total time in seconds Instant TE has been measured.
                   f3SyncJPTPClockProbeResHistorySlavePortIdentity 1.3.6.1.4.1.2544.1.12.22.1.7.1.47 displaystring read-only
The Tested Slave Port Identity.
                   f3SyncJPTPClockProbeResHistoryMasterPortIdentity 1.3.6.1.4.1.2544.1.12.22.1.7.1.48 displaystring read-only
The Tested Master Port Identity.
                   f3SyncJPTPClockProbeResHistoryConstTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.49 unsigned32 read-only
The Const TE Measurement Time for this entry.
                   f3SyncJPTPClockProbeResHistoryMaxTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.50 unsigned32 read-only
The Max TE Measurement Time for this entry.
                   f3SyncJPTPClockProbeResHistoryInstTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.51 unsigned32 read-only
The Inst TE Measurement Time for this entry.
                   f3SyncJPTPClockProbeResHistoryMaxTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.7.1.52 integer32 read-write
The TE Max threshold configured for this entry.
                   f3SyncJPTPClockProbeResHistoryMaxTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.7.1.53 integer32 read-write
The TE Max clear threshold configured for this entry.
           f3SyncJPTPClockProbeResHistoryMTIEValueTable 1.3.6.1.4.1.2544.1.12.22.1.8 no-access
A list of histgory entries corresponding to the PTP Clock Probe's MTIE Result Values.
               f3SyncJPTPClockProbeResHistoryMTIEValueEntry 1.3.6.1.4.1.2544.1.12.22.1.8.1 no-access
An entry containing information applicable to a particular PTP Clock Probe's MTIE Result Value.
                   f3SyncJPTPClockProbeResHistoryMTIEValueIndex 1.3.6.1.4.1.2544.1.12.22.1.8.1.1 integer32 no-access
Unique index value associated with the PTP Clock Probe History Result Value.
                   f3SyncJPTPClockProbeResHistoryMTIEValue 1.3.6.1.4.1.2544.1.12.22.1.8.1.2 integer32 read-only
This object allows SNMP management entities to retrieve MTIE Result Values in nanoseconds.
           f3SyncJPTPNetworkProbeTable 1.3.6.1.4.1.2544.1.12.22.1.9 no-access
A list of entries corresponding to the SyncJack PTP Network Probes.
               f3SyncJPTPNetworkProbeEntry 1.3.6.1.4.1.2544.1.12.22.1.9.1 no-access
An entry containing information applicable to a particular SyncJack PTP Network Probe.
                   f3SyncJPTPNetworkProbeIndex 1.3.6.1.4.1.2544.1.12.22.1.9.1.1 integer32 no-access
Unique index value associated with the PTP Network Probe.
                   f3SyncJPTPNetworkProbeName 1.3.6.1.4.1.2544.1.12.22.1.9.1.2 displaystring read-only
This object allows SNMP management entities to provide a name to the PTP Network Probe entity.
                   f3SyncJPTPNetworkProbeAdminState 1.3.6.1.4.1.2544.1.12.22.1.9.1.3 adminstate read-only
This object represents the Administrative State of the PTP Network Probe. This is not externally managed.
                   f3SyncJPTPNetworkProbeOperationalState 1.3.6.1.4.1.2544.1.12.22.1.9.1.4 operationalstate read-only
This object represents the Operational State of the PTP Network Probe.
                   f3SyncJPTPNetworkProbeSecondaryState 1.3.6.1.4.1.2544.1.12.22.1.9.1.5 secondarystate read-only
This object represents the Secondary State of the PTP Network Probe.
                   f3SyncJPTPNetworkProbePTPFlowPoint 1.3.6.1.4.1.2544.1.12.22.1.9.1.6 variablepointer read-only
This object allows SNMP management entities to specify the PTP Flow Point to use as source for PTP Network Probe measurements.
                   f3SyncJPTPNetworkProbeIpPrototocol 1.3.6.1.4.1.2544.1.12.22.1.9.1.7 ipversion read-write
This object allows SNMP management entities to specify the IP Protocol used for PTP communication.
                   f3SyncJPTPNetworkProbeSlaveIpV4Address 1.3.6.1.4.1.2544.1.12.22.1.9.1.8 ipaddress read-write
This object allows SNMP management entities to specify the Slave IP Address associated with the PTP Network Probe.
                   f3SyncJPTPNetworkProbeMasterIpV4Address 1.3.6.1.4.1.2544.1.12.22.1.9.1.9 ipaddress read-write
This object allows SNMP management entities to specify the Master IP Address associated with the PTP Network Probe.
                   f3SyncJPTPNetworkProbeReference 1.3.6.1.4.1.2544.1.12.22.1.9.1.10 variablepointer read-write
This object allows setting up of the PTP Network Probe Reference Entity.
                   f3SyncJPTPNetworkProbeExpectedQL 1.3.6.1.4.1.2544.1.12.22.1.9.1.11 ssmqualitylevel read-write
This object represents the minimum expected Quality Level when bits-in and sync-e PHY are references.
                   f3SyncJPTPNetworkProbeActualTestStartTime 1.3.6.1.4.1.2544.1.12.22.1.9.1.12 dateandtime read-only
This object provides information on the actual test start time.
                   f3SyncJPTPNetworkProbeActualTestDuration 1.3.6.1.4.1.2544.1.12.22.1.9.1.13 unsigned32 read-only
This object provides information on the actual test duration in seconds.
                   f3SyncJPTPNetworkProbePDVAssuredHi 1.3.6.1.4.1.2544.1.12.22.1.9.1.14 unsigned32 read-write
This object allows configuration of the higher order 32 bits of the assured level packet delay variation network limit for the PTP Network Probe, in nanoseconds. This helps in computing the network usability score.
                   f3SyncJPTPNetworkProbePDVAssuredLo 1.3.6.1.4.1.2544.1.12.22.1.9.1.15 unsigned32 read-write
This object allows configuration of the lower order 32 bits of the assured level packet delay variation network limit for the PTP Network Probe, in nanoseconds. This helps in computing the network usability score.
                   f3SyncJPTPNetworkProbePDVSatisfiedHi 1.3.6.1.4.1.2544.1.12.22.1.9.1.16 unsigned32 read-write
This object allows configuration of the higher order 32 bits of the satisfied level of packet delay variation network limit for the PTP Network Probe, in nanoseconds. This helps in computing the network usability score.
                   f3SyncJPTPNetworkProbePDVSatisfiedLo 1.3.6.1.4.1.2544.1.12.22.1.9.1.17 unsigned32 read-write
This object allows configuration of the lower order 32 bits of the satisfied level of packet delay variation network limit for the PTP Network Probe, in nanoseconds. This helps in computing the network usability score.
                   f3SyncJPTPNetworkProbeResPDVFwdLowRange 1.3.6.1.4.1.2544.1.12.22.1.9.1.18 unsigned32 read-write
This object allows configuration of the low range for Residual Path Delay Variation statistics in the forward direction (i.e. master to slave), in nanoseconds.
                   f3SyncJPTPNetworkProbeResPDVFwdMediumRange 1.3.6.1.4.1.2544.1.12.22.1.9.1.19 unsigned32 read-write
This object allows configuration of the medium range for Residual Path Delay Variation statistics in the forward direction (i.e. master to slave), in nanoseconds.
                   f3SyncJPTPNetworkProbeResPDVFwdHighRange 1.3.6.1.4.1.2544.1.12.22.1.9.1.20 unsigned32 read-write
This object allows configuration of the high range for Residual Path Delay Variation statistics in the forward direction (i.e. master to slave), in nanoseconds.
                   f3SyncJPTPNetworkProbeResPDVRevLowRange 1.3.6.1.4.1.2544.1.12.22.1.9.1.21 unsigned32 read-write
This object allows configuration of the low range for Residual Path Delay Variation statistics in the reverse direction (i.e. slave to master), in nanoseconds.
                   f3SyncJPTPNetworkProbeResPDVRevMediumRange 1.3.6.1.4.1.2544.1.12.22.1.9.1.22 unsigned32 read-write
This object allows configuration of the medium range for Residual Path Delay Variation statistics in the reverse direction (i.e. slave to master), in nanoseconds.
                   f3SyncJPTPNetworkProbeResPDVRevHighRange 1.3.6.1.4.1.2544.1.12.22.1.9.1.23 unsigned32 read-write
This object allows configuration of the high range for Residual Path Delay Variation statistics in the reverse direction (i.e. slave to master), in nanoseconds.
                   f3SyncJPTPNetworkProbeScheduler 1.3.6.1.4.1.2544.1.12.22.1.9.1.24 variablepointer read-only
This object provides the associated scheduler instance, if one exists, with this PTP Network Probe. This value is 0.0, if there is no scheduler associated with the PTP Network Probe.
                   f3SyncJPTPNetworkProbeTestState 1.3.6.1.4.1.2544.1.12.22.1.9.1.25 syncjackteststate read-only
This object provides the PTP Network Probe test state.
                   f3SyncJPTPNetworkProbeNoTimestampFailure 1.3.6.1.4.1.2544.1.12.22.1.9.1.26 truthvalue read-only
This object provides information on whether the measured PTP source indicated a no-timestamp failure.
                   f3SyncJPTPNetworkProbeNoEventMessageFailure 1.3.6.1.4.1.2544.1.12.22.1.9.1.27 truthvalue read-only
This object provides information on whether the measured PTP source indicated a no-event message failure.
                   f3SyncJPTPNetworkProbeFwdScore 1.3.6.1.4.1.2544.1.12.22.1.9.1.28 unsigned32 read-only
This object provides the current score in the forward direction.
                   f3SyncJPTPNetworkProbeRevScore 1.3.6.1.4.1.2544.1.12.22.1.9.1.29 unsigned32 read-only
This object provides the current score in the reverse direction.
                   f3SyncJPTPNetworkProbeReferenceFailure 1.3.6.1.4.1.2544.1.12.22.1.9.1.30 truthvalue read-only
This object provides information on whether the reference failed.
                   f3SyncJPTPNetworkProbeStorageType 1.3.6.1.4.1.2544.1.12.22.1.9.1.31 storagetype read-only
The type of storage configured for this entry.
                   f3SyncJPTPNetworkProbeRowStatus 1.3.6.1.4.1.2544.1.12.22.1.9.1.32 rowstatus read-only
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncJPTPNetworkProbeRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncJPTPNetworkProbeRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SyncJPTPNetworkProbeRowStatus object may be modified if the associated instance of this object is equal to active(1).
                   f3SyncJPTPNetworkProbeResultsAvailable 1.3.6.1.4.1.2544.1.12.22.1.9.1.33 truthvalue read-only
The results available configured for this entry.
           f3SyncJScheduleGroupTable 1.3.6.1.4.1.2544.1.12.22.1.10 no-access
A list of entries that allow a set of SyncJack Clock Probes, PTP Clock Probes and PTP Network Probes to be scheduled.
                 f3SyncJScheduleGroupEntry 1.3.6.1.4.1.2544.1.12.22.1.10.1 no-access
A row in f3SyncJScheduleGroupTable. Entries are created in this table by management application action.
                     f3SyncJScheduleGroupIndex 1.3.6.1.4.1.2544.1.12.22.1.10.1.1 integer32 no-access
A unique index to distinguish the SyncJack Schedule Group.
                     f3SyncJScheduleGroupDescr 1.3.6.1.4.1.2544.1.12.22.1.10.1.2 displaystring read-only
Description of the SyncJack schedule group.
                     f3SyncJScheduleGroupEntityList 1.3.6.1.4.1.2544.1.12.22.1.10.1.3 displaystring read-only
A comma separated list of Clock Probes, PTP Clock Probes and PTP Network Probes, that will have the same schedule.
                     f3SyncJScheduleGroupType 1.3.6.1.4.1.2544.1.12.22.1.10.1.4 scheduletype read-only
This object allows to specify the schedule group type of the SyncJack Schedule group. Only 'one-shot' is supported.
                     f3SyncJScheduleGroupStartTime 1.3.6.1.4.1.2544.1.12.22.1.10.1.5 dateandtime read-only
This object allows specification of the start time of the SyncJack Schedule Group. Value of time less than current system time will equate to current time. When the system time reaches this configured time, the SyncJack Schedule Group will be activated.
                     f3SyncJScheduleGroupDuration 1.3.6.1.4.1.2544.1.12.22.1.10.1.6 unsigned32 read-only
This object allows specification of the duration in 'seconds' for SyncJack Schedule Group run. Note that a value of 4294967295 means Duration as FOREVER.
                     f3SyncJScheduleGroupStatus 1.3.6.1.4.1.2544.1.12.22.1.10.1.7 schedactivitystatus read-only
This object indicates the current status of the SyncJack Schedule Group.
                     f3SyncJScheduleGroupStorageType 1.3.6.1.4.1.2544.1.12.22.1.10.1.8 storagetype read-only
The type of storage configured for this entry.
                     f3SyncJScheduleGroupRowStatus 1.3.6.1.4.1.2544.1.12.22.1.10.1.9 rowstatus read-only
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncJScheduleGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncJScheduleGroupRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The f3SyncJScheduleGroupRowStatus object may be modified if the associated instance of this object is equal to active(1).
           f3UserDefinedMTIEMaskTable 1.3.6.1.4.1.2544.1.12.22.1.11 no-access
A list of entries that enable the user to define a new (only one) MTIE mask for Clock Probe and for PTP clock Probe. .
                 f3UserDefinedMTIEMaskEntry 1.3.6.1.4.1.2544.1.12.22.1.11.1 no-access
A row in f3UserDefinedMTIEMaskTable. Entries are created in this table by management application action.
                     f3UserDefinedMTIEMaskIndex 1.3.6.1.4.1.2544.1.12.22.1.11.1.1 integer32 no-access
A unique index to distinguish the User Defined MTIE Mask.
                     f3UserDefinedMTIEMaskName 1.3.6.1.4.1.2544.1.12.22.1.11.1.2 displaystring read-only
This object allows SNMP management entities to provide a name to the User Defined MTIE Mask entity.
                     f3UserDefinedMTIEMaskDisplayPoints 1.3.6.1.4.1.2544.1.12.22.1.11.1.3 displaystring read-only
This object allows to specify the coordinates point in form of x,y pairs separated by semicolon. X values are in seconds, y values are in nanoseconds.
                     f3UserDefinedMTIEMaskMeasurmentPoints 1.3.6.1.4.1.2544.1.12.22.1.11.1.4 displaystring read-only
This object allows specification of the measurement intervals y-points in nanoseconds.
                     f3UserDefinedMTIEMaskStorageType 1.3.6.1.4.1.2544.1.12.22.1.11.1.5 storagetype read-only
The type of storage configured for this entry.
                     f3UserDefinedMTIEMaskRowStatus 1.3.6.1.4.1.2544.1.12.22.1.11.1.6 rowstatus read-only
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3UserDefinedMTIEMaskRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3UserDefinedMTIEMaskRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The f3UserDefinedMTIEMaskRowStatus object may be modified if f3UserDefinedMTIEMaskEntry of this object is equal to active(1).
       f3SyncJPerformanceObjects 1.3.6.1.4.1.2544.1.12.22.2
           f3SyncJPTPNetworkProbeStatsTable 1.3.6.1.4.1.2544.1.12.22.2.1 no-access
A collection of SyncJack PTP Network Probe statistics. These reflect the current data.
               f3SyncJPTPNetworkProbeStatsEntry 1.3.6.1.4.1.2544.1.12.22.2.1.1 no-access
A conceptual row in the f3SyncJPTPNetworkProbeStatsTable. Entries exist in this table for each PTP Network Probe.
                   f3SyncJPTPNetworkProbeStatsIndex 1.3.6.1.4.1.2544.1.12.22.2.1.1.1 integer32 no-access
An arbitrary integer index value used to uniquely identify this PTPNetworkProbe statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
                   f3SyncJPTPNetworkProbeStatsIntervalType 1.3.6.1.4.1.2544.1.12.22.2.1.1.2 cmpmintervaltype read-only
Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover.
                   f3SyncJPTPNetworkProbeStatsValid 1.3.6.1.4.1.2544.1.12.22.2.1.1.3 truthvalue read-only
Indicates the validity of the bin.
                   f3SyncJPTPNetworkProbeStatsAction 1.3.6.1.4.1.2544.1.12.22.2.1.1.4 cmpmbinaction read-write
Allows the Manager to clear the bin.
                   f3SyncJPTPNetworkProbeStatsSyncMsgsRx 1.3.6.1.4.1.2544.1.12.22.2.1.1.5 perfcounter32 read-only
Number of PTP Sync messages received at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeStatsDelayRspMsgsRx 1.3.6.1.4.1.2544.1.12.22.2.1.1.6 perfcounter32 read-only
Number of PTP Delay Response messages received at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeStatsLostSyncMsgs 1.3.6.1.4.1.2544.1.12.22.2.1.1.7 perfcounter32 read-only
Number of PTP Sync messages counted as lost at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeStatsLostDelayRspMsgs 1.3.6.1.4.1.2544.1.12.22.2.1.1.8 perfcounter32 read-only
Number of PTP Delay Response messages counted as lost at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeStatsMinMeanPathDelay 1.3.6.1.4.1.2544.1.12.22.2.1.1.9 scalednanoseconds read-only
Minimum Mean Path Delay in nanoseconds computed at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeStatsMaxMeanPathDelay 1.3.6.1.4.1.2544.1.12.22.2.1.1.10 scalednanoseconds read-only
Maximum Mean Path Delay in nanoseconds computed at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeStatsAvgMeanPathDelay 1.3.6.1.4.1.2544.1.12.22.2.1.1.11 scalednanoseconds read-only
Average Mean Path Delay in nanoseconds computed at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeStatsMinSyncPathDelay 1.3.6.1.4.1.2544.1.12.22.2.1.1.12 scalednanoseconds read-only
Minimum Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeStatsMaxSyncPathDelay 1.3.6.1.4.1.2544.1.12.22.2.1.1.13 scalednanoseconds read-only
Maximum Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeStatsAvgSyncPathDelay 1.3.6.1.4.1.2544.1.12.22.2.1.1.14 scalednanoseconds read-only
Average Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeStatsAvgResPDVFwd 1.3.6.1.4.1.2544.1.12.22.2.1.1.15 scalednanoseconds read-only
Average Residual Packet Delay Variation in nanoseconds in the forward direction.
                   f3SyncJPTPNetworkProbeStatsResPDVFwdLow 1.3.6.1.4.1.2544.1.12.22.2.1.1.16 unsigned32 read-only
Total number of Low Range Residual Packet Delay Variation results in the forward direction.
                   f3SyncJPTPNetworkProbeStatsResPDVFwdMedium 1.3.6.1.4.1.2544.1.12.22.2.1.1.17 unsigned32 read-only
Total number of Medium Range Residual Packet Delay Variation results in the forward direction.
                   f3SyncJPTPNetworkProbeStatsResPDVFwdHigh 1.3.6.1.4.1.2544.1.12.22.2.1.1.18 unsigned32 read-only
Total number of High Range Residual Packet Delay Variation results in the forward direction.
                   f3SyncJPTPNetworkProbeStatsResPDVFwdTotal 1.3.6.1.4.1.2544.1.12.22.2.1.1.19 unsigned32 read-only
Total number of Residual Packet Delay Variation results in the forward direction.
                   f3SyncJPTPNetworkProbeStatsFwdScore5 1.3.6.1.4.1.2544.1.12.22.2.1.1.20 unsigned32 read-only
Total time the network usability score is 5 in the forward direction.
                   f3SyncJPTPNetworkProbeStatsFwdScore4 1.3.6.1.4.1.2544.1.12.22.2.1.1.21 unsigned32 read-only
Total time the network usability score is 4 in the forward direction.
                   f3SyncJPTPNetworkProbeStatsFwdScore3 1.3.6.1.4.1.2544.1.12.22.2.1.1.22 unsigned32 read-only
Total time the network usability score is 3 in the forward direction.
                   f3SyncJPTPNetworkProbeStatsAvgResPDVRev 1.3.6.1.4.1.2544.1.12.22.2.1.1.23 scalednanoseconds read-only
Average Residual Packet Delay Variation in nanoseconds in the reverse direction.
                   f3SyncJPTPNetworkProbeStatsResPDVRevLow 1.3.6.1.4.1.2544.1.12.22.2.1.1.24 unsigned32 read-only
Total number of Low Range Residual Packet Delay Variation results in the reverse direction.
                   f3SyncJPTPNetworkProbeStatsResPDVRevMedium 1.3.6.1.4.1.2544.1.12.22.2.1.1.25 unsigned32 read-only
Total number of Medium Range Residual Packet Delay Variation results in the reverse direction.
                   f3SyncJPTPNetworkProbeStatsResPDVRevHigh 1.3.6.1.4.1.2544.1.12.22.2.1.1.26 unsigned32 read-only
Total number of High Range Residual Packet Delay Variation results in the reverse direction.
                   f3SyncJPTPNetworkProbeStatsResPDVRevTotal 1.3.6.1.4.1.2544.1.12.22.2.1.1.27 unsigned32 read-only
Total number of Residual Packet Delay Variation results in the reverse direction.
                   f3SyncJPTPNetworkProbeStatsRevScore5 1.3.6.1.4.1.2544.1.12.22.2.1.1.28 unsigned32 read-only
Total time the network usability score is 5 in the reverse direction.
                   f3SyncJPTPNetworkProbeStatsRevScore4 1.3.6.1.4.1.2544.1.12.22.2.1.1.29 unsigned32 read-only
Total time the network usability score is 4 in the reverse direction.
                   f3SyncJPTPNetworkProbeStatsRevScore3 1.3.6.1.4.1.2544.1.12.22.2.1.1.30 unsigned32 read-only
Total time the network usability score is 3 in the reverse direction.
                   f3SyncJPTPNetworkProbeStatsMinRPDVFwd 1.3.6.1.4.1.2544.1.12.22.2.1.1.31 scalednanoseconds read-only
Minimum Residual PDV in the forward direction.
                   f3SyncJPTPNetworkProbeStatsMinRPDVRev 1.3.6.1.4.1.2544.1.12.22.2.1.1.32 scalednanoseconds read-only
Minimum Residual PDV in the reverse direction.
                   f3SyncJPTPNetworkProbeStatsMinPathAsymmetry 1.3.6.1.4.1.2544.1.12.22.2.1.1.33 unsigned32 read-write
The min path asymmetry for this entry.
                   f3SyncJPTPNetworkProbeStatsMaxPathAsymmetry 1.3.6.1.4.1.2544.1.12.22.2.1.1.34 unsigned32 read-write
The max path asymmetry for this entry.
                   f3SyncJPTPNetworkProbeStatsAvgPathAsymmetry 1.3.6.1.4.1.2544.1.12.22.2.1.1.35 unsigned32 read-write
The average path asymmetry for this entry.
                   f3SyncJPTPNetworkProbeStatsPathLossSecondsFwd 1.3.6.1.4.1.2544.1.12.22.2.1.1.36 unsigned32 read-write
The path loss seconds forwarded for this entry.
                   f3SyncJPTPNetworkProbeStatsPathLossSecondsRev 1.3.6.1.4.1.2544.1.12.22.2.1.1.37 unsigned32 read-write
The path loss seconds reverted for this entry.
                   f3SyncJPTPNetworkProbeStatsMinDelayReqPathDelay 1.3.6.1.4.1.2544.1.12.22.2.1.1.38 scalednanoseconds read-only
Minimum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeStatsMaxDelayReqPathDelay 1.3.6.1.4.1.2544.1.12.22.2.1.1.39 scalednanoseconds read-only
Maximum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeStatsAvgDelayReqPathDelay 1.3.6.1.4.1.2544.1.12.22.2.1.1.40 scalednanoseconds read-only
Average Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.
           f3SyncJPTPNetworkProbeHistoryTable 1.3.6.1.4.1.2544.1.12.22.2.2 no-access
A collection of SyncJack PTP Network Probe statistics. These reflect the history data.
               f3SyncJPTPNetworkProbeHistoryEntry 1.3.6.1.4.1.2544.1.12.22.2.2.1 no-access
A conceptual row in the f3SyncJPTPNetworkProbeHistoryTable. Entries exist in this table for each PTP Network Probe.
                   f3SyncJPTPNetworkProbeHistoryIndex 1.3.6.1.4.1.2544.1.12.22.2.2.1.1 integer32 no-access
An arbitrary integer index value used to uniquely identify this SyncJack PTP Network Probe PM history entry.
                   f3SyncJPTPNetworkProbeHistoryTime 1.3.6.1.4.1.2544.1.12.22.2.2.1.2 dateandtime read-only
Indicates the time of history bin creation.
                   f3SyncJPTPNetworkProbeHistoryValid 1.3.6.1.4.1.2544.1.12.22.2.2.1.3 truthvalue read-only
Indicates the validity of the bin.
                   f3SyncJPTPNetworkProbeHistoryAction 1.3.6.1.4.1.2544.1.12.22.2.2.1.4 cmpmbinaction read-write
Allows the Manager to clear the bin.
                   f3SyncJPTPNetworkProbeHistorySyncMsgsRx 1.3.6.1.4.1.2544.1.12.22.2.2.1.5 perfcounter32 read-only
Number of PTP Sync messages received at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeHistoryDelayRspMsgsRx 1.3.6.1.4.1.2544.1.12.22.2.2.1.6 perfcounter32 read-only
Number of PTP Delay Response messages received at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeHistoryLostSyncMsgs 1.3.6.1.4.1.2544.1.12.22.2.2.1.7 perfcounter32 read-only
Number of PTP Sync messages counted as lost at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeHistoryLostDelayRspMsgs 1.3.6.1.4.1.2544.1.12.22.2.2.1.8 perfcounter32 read-only
Number of PTP Delay Response messages counted as lost at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeHistoryMinMeanPathDelay 1.3.6.1.4.1.2544.1.12.22.2.2.1.9 scalednanoseconds read-only
Minimum Mean Path Delay in nanoseconds computed at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeHistoryMaxMeanPathDelay 1.3.6.1.4.1.2544.1.12.22.2.2.1.10 scalednanoseconds read-only
Maximum Mean Path Delay in nanoseconds computed at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeHistoryAvgMeanPathDelay 1.3.6.1.4.1.2544.1.12.22.2.2.1.11 scalednanoseconds read-only
Average Mean Path Delay in nanoseconds computed at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeHistoryMinSyncPathDelay 1.3.6.1.4.1.2544.1.12.22.2.2.1.12 scalednanoseconds read-only
Minimum Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeHistoryMaxSyncPathDelay 1.3.6.1.4.1.2544.1.12.22.2.2.1.13 scalednanoseconds read-only
Maximum Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeHistoryAvgSyncPathDelay 1.3.6.1.4.1.2544.1.12.22.2.2.1.14 scalednanoseconds read-only
Average Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeHistoryAvgResPDVFwd 1.3.6.1.4.1.2544.1.12.22.2.2.1.15 scalednanoseconds read-only
Average Residual Packet Delay Variation in nanoseconds in the forward direction.
                   f3SyncJPTPNetworkProbeHistoryResPDVFwdLow 1.3.6.1.4.1.2544.1.12.22.2.2.1.16 unsigned32 read-only
Total number of Low Range Residual Packet Delay Variation results in the forward direction.
                   f3SyncJPTPNetworkProbeHistoryResPDVFwdMedium 1.3.6.1.4.1.2544.1.12.22.2.2.1.17 unsigned32 read-only
Total number of Medium Range Residual Packet Delay Variation results in the forward direction.
                   f3SyncJPTPNetworkProbeHistoryResPDVFwdHigh 1.3.6.1.4.1.2544.1.12.22.2.2.1.18 unsigned32 read-only
Total number of High Range Residual Packet Delay Variation results in the forward direction.
                   f3SyncJPTPNetworkProbeHistoryResPDVFwdTotal 1.3.6.1.4.1.2544.1.12.22.2.2.1.19 unsigned32 read-only
Total number of Residual Packet Delay Variation results in the forward direction.
                   f3SyncJPTPNetworkProbeHistoryFwdScore5 1.3.6.1.4.1.2544.1.12.22.2.2.1.20 unsigned32 read-only
Total time the network usability score is 5 in the forward direction.
                   f3SyncJPTPNetworkProbeHistoryFwdScore4 1.3.6.1.4.1.2544.1.12.22.2.2.1.21 unsigned32 read-only
Total time the network usability score is 4 in the forward direction.
                   f3SyncJPTPNetworkProbeHistoryFwdScore3 1.3.6.1.4.1.2544.1.12.22.2.2.1.22 unsigned32 read-only
Total time the network usability score is 3 in the forward direction.
                   f3SyncJPTPNetworkProbeHistoryAvgResPDVRev 1.3.6.1.4.1.2544.1.12.22.2.2.1.23 scalednanoseconds read-only
Average Residual Packet Delay Variation in nanoseconds in the reverse direction.
                   f3SyncJPTPNetworkProbeHistoryResPDVRevLow 1.3.6.1.4.1.2544.1.12.22.2.2.1.24 unsigned32 read-only
Total number of Low Range Residual Packet Delay Variation results in the reverse direction.
                   f3SyncJPTPNetworkProbeHistoryResPDVRevMedium 1.3.6.1.4.1.2544.1.12.22.2.2.1.25 unsigned32 read-only
Total number of Medium Range Residual Packet Delay Variation results in the reverse direction.
                   f3SyncJPTPNetworkProbeHistoryResPDVRevHigh 1.3.6.1.4.1.2544.1.12.22.2.2.1.26 unsigned32 read-only
Total number of High Range Residual Packet Delay Variation results in the reverse direction.
                   f3SyncJPTPNetworkProbeHistoryResPDVRevTotal 1.3.6.1.4.1.2544.1.12.22.2.2.1.27 unsigned32 read-only
Total number of Residual Packet Delay Variation results in the reverse direction.
                   f3SyncJPTPNetworkProbeHistoryRevScore5 1.3.6.1.4.1.2544.1.12.22.2.2.1.28 unsigned32 read-only
Total time the network usability score is 5 in the reverse direction.
                   f3SyncJPTPNetworkProbeHistoryRevScore4 1.3.6.1.4.1.2544.1.12.22.2.2.1.29 unsigned32 read-only
Total time the network usability score is 4 in the reverse direction.
                   f3SyncJPTPNetworkProbeHistoryRevScore3 1.3.6.1.4.1.2544.1.12.22.2.2.1.30 unsigned32 read-only
Total time the network usability score is 3 in the reverse direction.
                   f3SyncJPTPNetworkProbeHistoryMinRPDVFwd 1.3.6.1.4.1.2544.1.12.22.2.2.1.31 scalednanoseconds read-only
Minimum Residual PDV in the forward direction.
                   f3SyncJPTPNetworkProbeHistoryMinRPDVRev 1.3.6.1.4.1.2544.1.12.22.2.2.1.32 scalednanoseconds read-only
Minimum Residual PDV in the reverse direction.
                   f3SyncJPTPNetworkProbeHistoryMinPathAsymmetry 1.3.6.1.4.1.2544.1.12.22.2.2.1.33 unsigned32 read-only
The min path asymmetry for this entry.
                   f3SyncJPTPNetworkProbeHistoryMaxPathAsymmetry 1.3.6.1.4.1.2544.1.12.22.2.2.1.34 unsigned32 read-only
The max path asymmetry for this entry.
                   f3SyncJPTPNetworkProbeHistoryAvgPathAsymmetry 1.3.6.1.4.1.2544.1.12.22.2.2.1.35 unsigned32 read-only
The average path asymmetry for this entry.
                   f3SyncJPTPNetworkProbeHistoryMinDelayReqPathDelay 1.3.6.1.4.1.2544.1.12.22.2.2.1.36 scalednanoseconds read-only
Minimum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeHistoryMaxDelayReqPathDelay 1.3.6.1.4.1.2544.1.12.22.2.2.1.37 scalednanoseconds read-only
Maximum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.
                   f3SyncJPTPNetworkProbeHistoryAvgDelayReqPathDelay 1.3.6.1.4.1.2544.1.12.22.2.2.1.38 scalednanoseconds read-only
Average Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.
           f3SyncJPTPNetworkProbeThresholdTable 1.3.6.1.4.1.2544.1.12.22.2.3 no-access
A table of entries that allow support the PTP Network Probe Thresholds.
               f3SyncJPTPNetworkProbeThresholdEntry 1.3.6.1.4.1.2544.1.12.22.2.3.1 no-access
A conceptual row in the f3SyncJPTPNetworkProbeThresholdTable.
                   f3SyncJPTPNetworkProbeThresholdIndex 1.3.6.1.4.1.2544.1.12.22.2.3.1.1 integer32 no-access
An index that uniquely identifies an entry in the f3SyncJPTPNetworkProbeThresholdTable.
                   f3SyncJPTPNetworkProbeThresholdInterval 1.3.6.1.4.1.2544.1.12.22.2.3.1.2 cmpmintervaltype read-only
The interval over which monitored value is sampled and compared with the specified threshold.
                   f3SyncJPTPNetworkProbeThresholdVariable 1.3.6.1.4.1.2544.1.12.22.2.3.1.3 variablepointer read-only
The object identifier of the particular variable to be sampled.
                   f3SyncJPTPNetworkProbeThresholdValueLo 1.3.6.1.4.1.2544.1.12.22.2.3.1.4 unsigned32 read-write
Lower 32 bits of the threshold value.
                   f3SyncJPTPNetworkProbeThresholdValueHi 1.3.6.1.4.1.2544.1.12.22.2.3.1.5 unsigned32 read-write
Higher 32 bits of the threshold value.
                   f3SyncJPTPNetworkProbeThresholdMonValue 1.3.6.1.4.1.2544.1.12.22.2.3.1.6 perfcounter64 read-only
Monitored value corresponding to f3SyncJPTPNetworkProbeThresholdVariable.
           f3SyncJClockProbeStatsTable 1.3.6.1.4.1.2544.1.12.22.2.4 no-access
A collection of SyncJack Clock Probe statistics. These reflect the current data.
               f3SyncJClockProbeStatsEntry 1.3.6.1.4.1.2544.1.12.22.2.4.1 no-access
A conceptual row in the f3SyncJClockProbeStatsTable. Entries exist in this table for each Clock Probe.
                   f3SyncJClockProbeStatsIndex 1.3.6.1.4.1.2544.1.12.22.2.4.1.1 integer32 no-access
An arbitrary integer index value used to uniquely identify this PTPNetworkProbe statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
                   f3SyncJClockProbeStatsIntervalType 1.3.6.1.4.1.2544.1.12.22.2.4.1.2 cmpmintervaltype read-only
Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover.
                   f3SyncJClockProbeStatsValid 1.3.6.1.4.1.2544.1.12.22.2.4.1.3 truthvalue read-only
Indicates the validity of the bin.
                   f3SyncJClockProbeStatsAction 1.3.6.1.4.1.2544.1.12.22.2.4.1.4 cmpmbinaction read-write
Allows the Manager to clear the bin.
                   f3SyncJClockProbeStatsMTIE1s 1.3.6.1.4.1.2544.1.12.22.2.4.1.5 unsigned32 read-only
This attribute indicates MTIE value in ns for 1s observation window.
                   f3SyncJClockProbeStatsMTIE10s 1.3.6.1.4.1.2544.1.12.22.2.4.1.6 unsigned32 read-only
This attribute indicates MTIE value in ns for 10s observation window.
                   f3SyncJClockProbeStatsMTIE100s 1.3.6.1.4.1.2544.1.12.22.2.4.1.7 unsigned32 read-only
This attribute indicates MTIE value in ns for 100s observation window.
                   f3SyncJClockProbeStatsMTIE1000s 1.3.6.1.4.1.2544.1.12.22.2.4.1.8 unsigned32 read-only
This attribute indicates MTIE value in ns for 1000s observation window.
                   f3SyncJClockProbeStatsMTIE10000s 1.3.6.1.4.1.2544.1.12.22.2.4.1.9 unsigned32 read-only
This attribute indicates MTIE value in ns for 10000s observation window.
                   f3SyncJClockProbeStatsMTIE50000s 1.3.6.1.4.1.2544.1.12.22.2.4.1.10 unsigned32 read-only
This attribute indicates MTIE value in ns for 50000s observation window.
                   f3SyncJClockProbeStatsMaxTE 1.3.6.1.4.1.2544.1.12.22.2.4.1.11 integer32 read-only
This attribute indicates maximum TE value in ns observed over PM interval.
                   f3SyncJClockProbeStatsMaxConstTE 1.3.6.1.4.1.2544.1.12.22.2.4.1.12 integer32 read-only
This attribute indicates maximum constant TE value in ns observed over PM interval.
           f3SyncJClockProbeHistoryTable 1.3.6.1.4.1.2544.1.12.22.2.5 no-access
A collection of SyncJack Clock Probe statistics. These reflect the history data.
               f3SyncJClockProbeHistoryEntry 1.3.6.1.4.1.2544.1.12.22.2.5.1 no-access
A conceptual row in the f3SyncJClockProbeHistoryTable. Entries exist in this table for each Clock Probe.
                   f3SyncJClockProbeHistoryIndex 1.3.6.1.4.1.2544.1.12.22.2.5.1.1 integer32 no-access
An arbitrary integer index value used to uniquely identify this SyncJack Clock Probe PM history entry.
                   f3SyncJClockProbeHistoryTime 1.3.6.1.4.1.2544.1.12.22.2.5.1.2 dateandtime read-only
Indicates the time of history bin creation.
                   f3SyncJClockProbeHistoryValid 1.3.6.1.4.1.2544.1.12.22.2.5.1.3 truthvalue read-only
Indicates the validity of the bin.
                   f3SyncJClockProbeHistoryAction 1.3.6.1.4.1.2544.1.12.22.2.5.1.4 cmpmbinaction read-write
Allows the Manager to clear the bin.
                   f3SyncJClockProbeHistoryMTIE1s 1.3.6.1.4.1.2544.1.12.22.2.5.1.5 unsigned32 read-only
This attribute indicates MTIE value in ns for 1s observation window.
                   f3SyncJClockProbeHistoryMTIE10s 1.3.6.1.4.1.2544.1.12.22.2.5.1.6 unsigned32 read-only
This attribute indicates MTIE value in ns for 10s observation window.
                   f3SyncJClockProbeHistoryMTIE100s 1.3.6.1.4.1.2544.1.12.22.2.5.1.7 unsigned32 read-only
This attribute indicates MTIE value in ns for 100s observation window.
                   f3SyncJClockProbeHistoryMTIE1000s 1.3.6.1.4.1.2544.1.12.22.2.5.1.8 unsigned32 read-only
This attribute indicates MTIE value in ns for 1000s observation window.
                   f3SyncJClockProbeHistoryMTIE10000s 1.3.6.1.4.1.2544.1.12.22.2.5.1.9 unsigned32 read-only
This attribute indicates MTIE value in ns for 10000s observation window.
                   f3SyncJClockProbeHistoryMTIE50000s 1.3.6.1.4.1.2544.1.12.22.2.5.1.10 unsigned32 read-only
This attribute indicates MTIE value in ns for 50000s observation window.
                   f3SyncJClockProbeHistoryMaxTE 1.3.6.1.4.1.2544.1.12.22.2.5.1.11 integer32 read-only
This attribute indicates maximum TE value in ns observed over PM interval.
                   f3SyncJClockProbeHistoryMaxConstTE 1.3.6.1.4.1.2544.1.12.22.2.5.1.12 integer32 read-only
This attribute indicates maximum constant TE value in ns observed over PM interval.
           f3SyncJClockProbeThresholdTable 1.3.6.1.4.1.2544.1.12.22.2.6 no-access
A table of entries that allow support the Clock Probe Thresholds.
               f3SyncJClockProbeThresholdEntry 1.3.6.1.4.1.2544.1.12.22.2.6.1 no-access
A conceptual row in the f3SyncJClockProbeThresholdTable.
                   f3SyncJClockProbeThresholdIndex 1.3.6.1.4.1.2544.1.12.22.2.6.1.1 integer32 no-access
An index that uniquely identifies an entry in the f3SyncJClockProbeThresholdTable.
                   f3SyncJClockProbeThresholdInterval 1.3.6.1.4.1.2544.1.12.22.2.6.1.2 cmpmintervaltype read-only
The interval over which monitored value is sampled and compared with the specified threshold.
                   f3SyncJClockProbeThresholdVariable 1.3.6.1.4.1.2544.1.12.22.2.6.1.3 variablepointer read-only
The object identifier of the particular variable to be sampled.
                   f3SyncJClockProbeThresholdValueLo 1.3.6.1.4.1.2544.1.12.22.2.6.1.4 unsigned32 read-write
Lower 32 bits of the threshold value.
                   f3SyncJClockProbeThresholdValueHi 1.3.6.1.4.1.2544.1.12.22.2.6.1.5 unsigned32 read-write
Higher 32 bits of the threshold value.
                   f3SyncJClockProbeThresholdMonValue 1.3.6.1.4.1.2544.1.12.22.2.6.1.6 perfcounter64 read-only
Monitored value corresponding to f3SyncJClockProbeThresholdVariable.
           f3SyncJPTPClockProbeStatsTable 1.3.6.1.4.1.2544.1.12.22.2.7 no-access
A collection of SyncJack PTP Clock Probe statistics. These reflect the current data.
               f3SyncJPTPClockProbeStatsEntry 1.3.6.1.4.1.2544.1.12.22.2.7.1 no-access
A conceptual row in the f3SyncJPTPClockProbeStatsTable. Entries exist in this table for each PTP Clock Probe.
                   f3SyncJPTPClockProbeStatsIndex 1.3.6.1.4.1.2544.1.12.22.2.7.1.1 integer32 no-access
An arbitrary integer index value used to uniquely identify this PTPNetworkProbe statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
                   f3SyncJPTPClockProbeStatsIntervalType 1.3.6.1.4.1.2544.1.12.22.2.7.1.2 cmpmintervaltype read-only
Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover.
                   f3SyncJPTPClockProbeStatsValid 1.3.6.1.4.1.2544.1.12.22.2.7.1.3 truthvalue read-only
Indicates the validity of the bin.
                   f3SyncJPTPClockProbeStatsAction 1.3.6.1.4.1.2544.1.12.22.2.7.1.4 cmpmbinaction read-write
Allows the Manager to clear the bin.
                   f3SyncJPTPClockProbeStatsMTIE1s 1.3.6.1.4.1.2544.1.12.22.2.7.1.5 unsigned32 read-only
This attribute indicates MTIE value in ns for 1s observation window.
                   f3SyncJPTPClockProbeStatsMTIE10s 1.3.6.1.4.1.2544.1.12.22.2.7.1.6 unsigned32 read-only
This attribute indicates MTIE value in ns for 10s observation window.
                   f3SyncJPTPClockProbeStatsMTIE100s 1.3.6.1.4.1.2544.1.12.22.2.7.1.7 unsigned32 read-only
This attribute indicates MTIE value in ns for 100s observation window.
                   f3SyncJPTPClockProbeStatsMTIE1000s 1.3.6.1.4.1.2544.1.12.22.2.7.1.8 unsigned32 read-only
This attribute indicates MTIE value in ns for 1000s observation window.
                   f3SyncJPTPClockProbeStatsMTIE10000s 1.3.6.1.4.1.2544.1.12.22.2.7.1.9 unsigned32 read-only
This attribute indicates MTIE value in ns for 10000s observation window.
                   f3SyncJPTPClockProbeStatsMTIE50000s 1.3.6.1.4.1.2544.1.12.22.2.7.1.10 unsigned32 read-only
This attribute indicates MTIE value in ns for 50000s observation window.
                   f3SyncJPTPClockProbeStatsMaxTE 1.3.6.1.4.1.2544.1.12.22.2.7.1.11 integer32 read-only
This attribute indicates maximum TE value in ns observed over PM interval.
                   f3SyncJPTPClockProbeStatsMaxConstTE 1.3.6.1.4.1.2544.1.12.22.2.7.1.12 integer32 read-only
This attribute indicates maximum constant TE value in ns observed over PM interval.
           f3SyncJPTPClockProbeHistoryTable 1.3.6.1.4.1.2544.1.12.22.2.8 no-access
A collection of SyncJack PTP Clock Probe statistics. These reflect the history data.
               f3SyncJPTPClockProbeHistoryEntry 1.3.6.1.4.1.2544.1.12.22.2.8.1 no-access
A conceptual row in the f3SyncJPTPClockProbeHistoryTable. Entries exist in this table for each PTP Clock Probe.
                   f3SyncJPTPClockProbeHistoryIndex 1.3.6.1.4.1.2544.1.12.22.2.8.1.1 integer32 no-access
An arbitrary integer index value used to uniquely identify this SyncJack PTP Clock Probe PM history entry.
                   f3SyncJPTPClockProbeHistoryTime 1.3.6.1.4.1.2544.1.12.22.2.8.1.2 dateandtime read-only
Indicates the time of history bin creation.
                   f3SyncJPTPClockProbeHistoryValid 1.3.6.1.4.1.2544.1.12.22.2.8.1.3 truthvalue read-only
Indicates the validity of the bin.
                   f3SyncJPTPClockProbeHistoryAction 1.3.6.1.4.1.2544.1.12.22.2.8.1.4 cmpmbinaction read-write
Allows the Manager to clear the bin.
                   f3SyncJPTPClockProbeHistoryMTIE1s 1.3.6.1.4.1.2544.1.12.22.2.8.1.5 unsigned32 read-only
This attribute indicates MTIE value in ns for 1s observation window.
                   f3SyncJPTPClockProbeHistoryMTIE10s 1.3.6.1.4.1.2544.1.12.22.2.8.1.6 unsigned32 read-only
This attribute indicates MTIE value in ns for 10s observation window.
                   f3SyncJPTPClockProbeHistoryMTIE100s 1.3.6.1.4.1.2544.1.12.22.2.8.1.7 unsigned32 read-only
This attribute indicates MTIE value in ns for 100s observation window.
                   f3SyncJPTPClockProbeHistoryMTIE1000s 1.3.6.1.4.1.2544.1.12.22.2.8.1.8 unsigned32 read-only
This attribute indicates MTIE value in ns for 1000s observation window.
                   f3SyncJPTPClockProbeHistoryMTIE10000s 1.3.6.1.4.1.2544.1.12.22.2.8.1.9 unsigned32 read-only
This attribute indicates MTIE value in ns for 10000s observation window.
                   f3SyncJPTPClockProbeHistoryMTIE50000s 1.3.6.1.4.1.2544.1.12.22.2.8.1.10 unsigned32 read-only
This attribute indicates MTIE value in ns for 50000s observation window.
                   f3SyncJPTPClockProbeHistoryMaxTE 1.3.6.1.4.1.2544.1.12.22.2.8.1.11 integer32 read-only
This attribute indicates maximum TE value in ns observed over PM interval.
                   f3SyncJPTPClockProbeHistoryMaxConstTE 1.3.6.1.4.1.2544.1.12.22.2.8.1.12 integer32 read-only
This attribute indicates maximum constant TE value in ns observed over PM interval.
           f3SyncJPTPClockProbeThresholdTable 1.3.6.1.4.1.2544.1.12.22.2.9 no-access
A table of entries that allow support the PTP Clock Probe Thresholds.
               f3SyncJPTPClockProbeThresholdEntry 1.3.6.1.4.1.2544.1.12.22.2.9.1 no-access
A conceptual row in the f3SyncJPTPClockProbeThresholdTable.
                   f3SyncJPTPClockProbeThresholdIndex 1.3.6.1.4.1.2544.1.12.22.2.9.1.1 integer32 no-access
An index that uniquely identifies an entry in the f3SyncJPTPClockProbeThresholdTable.
                   f3SyncJPTPClockProbeThresholdInterval 1.3.6.1.4.1.2544.1.12.22.2.9.1.2 cmpmintervaltype read-only
The interval over which monitored value is sampled and compared with the specified threshold.
                   f3SyncJPTPClockProbeThresholdVariable 1.3.6.1.4.1.2544.1.12.22.2.9.1.3 variablepointer read-only
The object identifier of the particular variable to be sampled.
                   f3SyncJPTPClockProbeThresholdValueLo 1.3.6.1.4.1.2544.1.12.22.2.9.1.4 unsigned32 read-write
Lower 32 bits of the threshold value.
                   f3SyncJPTPClockProbeThresholdValueHi 1.3.6.1.4.1.2544.1.12.22.2.9.1.5 unsigned32 read-write
Higher 32 bits of the threshold value.
                   f3SyncJPTPClockProbeThresholdMonValue 1.3.6.1.4.1.2544.1.12.22.2.9.1.6 perfcounter64 read-only
Monitored value corresponding to f3SyncJPTPClockProbeThresholdVariable.
       f3SyncJNotifications 1.3.6.1.4.1.2544.1.12.22.3
           f3SyncJPTPNetworkProbeThresholdCrossingAlert 1.3.6.1.4.1.2544.1.12.22.3.1
This trap is sent each time a threshold on a PM condition on an PTP Network Probe is crossed.
           f3SyncJClockProbeStatusChangeTrap 1.3.6.1.4.1.2544.1.12.22.3.2
This trap is sent each time any status changes happen on a SyncJack Clock Probe.
           f3SyncJPTPClockProbeStatusChangeTrap 1.3.6.1.4.1.2544.1.12.22.3.3
This trap is sent each time any status changes happen on a SyncJack PTP Clock Probe.
           f3SyncJPTPNetworkProbeStatusChangeTrap 1.3.6.1.4.1.2544.1.12.22.3.4
This trap is sent each time any status changes happen on a SyncJack PTP Network Probe.
           f3SyncJClockProbeThresholdCrossingAlert 1.3.6.1.4.1.2544.1.12.22.3.5
This trap is sent each time a threshold on a PM condition on an Clock Probe is crossed.
           f3SyncJPTPClockProbeThresholdCrossingAlert 1.3.6.1.4.1.2544.1.12.22.3.6
This trap is sent each time a threshold on a PM condition on an PTP Clock Probe is crossed.
       f3SyncJConformance 1.3.6.1.4.1.2544.1.12.22.4
           f3SyncJCompliances 1.3.6.1.4.1.2544.1.12.22.4.1
               f3SyncJCompliance 1.3.6.1.4.1.2544.1.12.22.4.1.1
Describes the requirements for conformance to the F3 SyncJack group.
           f3SyncJGroups 1.3.6.1.4.1.2544.1.12.22.4.2
               f3SyncJObjectGroup 1.3.6.1.4.1.2544.1.12.22.4.2.1
A collection of objects used to manage the F3 SyncJack Configuration data.
               f3SyncJPerfObjectGroup 1.3.6.1.4.1.2544.1.12.22.4.2.2
A collection of objects used to manage the F3 SyncJack Performance data.
               f3SyncJNotifGroup 1.3.6.1.4.1.2544.1.12.22.4.2.3
A collection of notifications related to F3 SyncJack functionality.