EXTREME-VM-MIB: View SNMP OID List / Download MIB

VENDOR: EXTREME NETWORKS


 Home MIB: EXTREME-VM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, INET-ADDRESS-MIB, EXTREME-BASE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 extremeVM 1.3.6.1.4.1.1916.1.39
Extreme Network Virtual Machine Management MIB
       extremeVMGeneral 1.3.6.1.4.1.1916.1.39.1
           extremeVMFTPServerTable 1.3.6.1.4.1.1916.1.39.1.1 no-access
The FTP servers defined for this switch
               extremeVMFTPServerEntry 1.3.6.1.4.1.1916.1.39.1.1.1 no-access
The FTP server entry for this switch
                   extremeVMFTPServerType 1.3.6.1.4.1.1916.1.39.1.1.1.1 integer no-access
The type of the FTP server. The backup server is contacted if the primary fails to respond. Enumeration: 'backup': 2, 'primary': 1.
                   extremeVMFTPAddrType 1.3.6.1.4.1.1916.1.39.1.1.1.2 inetaddresstype read-write
The IP type of IP address.
                   extremeVMFTPServer 1.3.6.1.4.1.1916.1.39.1.1.1.3 inetaddress read-only
The IP Address of the FTP server used for transferring various management files.
                   extremeVMFTPSynchInterval 1.3.6.1.4.1.1916.1.39.1.1.1.4 integer read-only
The time in minutes between automatic synchronization attempts. A value of 0 indicates that automatic synchronizations are not performed. Note that each switch will not perform a synchronization at exactly the time configured, but will vary the synchronization interval between 3/4 and 5/4 of the configured interval. This will avoid the situation where all switches in a network attempt a synchronizationat exactly the same moment. Other than value of 0 value of 40-3600 can be configured as interval. Automatic synchronization is disabled by default, and requests to enable them are rejected until the FTP server information (IP or IPv6 Address, Username, and Password) is configured.
                   extremeVMFTPRowStatus 1.3.6.1.4.1.1916.1.39.1.1.1.5 rowstatus read-only
There can only be two entries in this table, on each for primary and secondary FTP servers
                   extremeVMFTPPathName 1.3.6.1.4.1.1916.1.39.1.1.1.6 displaystring read-write
The FTP server directory name for the policies to be synchronized. A value of '/pub' will be used by default for anonymous users and value of '/' will be used for other users
                   extremeVMFTPUsername 1.3.6.1.4.1.1916.1.39.1.1.1.7 displaystring read-write
A valid username on the FTP server.
                   extremeVMFTPPassword 1.3.6.1.4.1.1916.1.39.1.1.1.8 displaystring read-write
The Password associated with the FTP user. This object will return a zero length string when queried
           extremeVMFTPPolicyDir 1.3.6.1.4.1.1916.1.39.1.2 displaystring read-write
The server directory name for the policies to be synchronized. A value of '/' will be used by default
           extremeVMLastSynch 1.3.6.1.4.1.1916.1.39.1.3 timestamp read-only
The timestamp of the most recent synchronization attempt
           extremeVMLastSynchStatus 1.3.6.1.4.1.1916.1.39.1.4 integer read-only
The result of the most recent synchronization attempt. success(1) - indicates that the synchronization completed successfully accessDenied(2) - The username and password were not accepted by the server serverTimeout(3) - Could not establish a file transfer session with the configured server serverNotConfigured(4) - The server configuration is not complete Enumeration: 'serverNotConfigured': 4, 'serverTimeout': 3, 'success': 1, 'accessDenied': 2.
           extremeVMSynchAdminState 1.3.6.1.4.1.1916.1.39.1.5 integer read-write
Triggers a synchronization cycle on demand. A synchronization will automatically download new or updated policies as well as delete policies to match those on the server. idle(1) is returned whenever this object is read. synchronizeNow(2) triggers an immediate synchronization, and will be reflected in extremeVMSynchOperState. Attempts to set this variable to synchronizeNow(2) will be rejected if a synchronization is currently in progress. Enumeration: 'idle': 1, 'synchronizeNow': 2.
           extremeVMSynchOperState 1.3.6.1.4.1.1916.1.39.1.6 integer read-only
Indicates if a synchronization is in progress, either on-demand or automatic Enumeration: 'idle': 1, 'synchronizing': 2.
           extremeVMTrackingEnabled 1.3.6.1.4.1.1916.1.39.1.7 truthvalue read-write
The VM tracking feature is disabled by default, and can be enabled using this object.
           extremeVMPortConfigTable 1.3.6.1.4.1.1916.1.39.1.8 no-access
Configures the VM features on each port.
               extremeVMPortConfigEntry 1.3.6.1.4.1.1916.1.39.1.8.1 no-access
An entry in the table for VM features on each port.
                   extremeVMPortConfigIfIndex 1.3.6.1.4.1.1916.1.39.1.8.1.1 integer32 no-access
The value of ifIndex of a physical port capable of supporting the VM Tracking features
                   extremeVMPortConfigVMTrackingEnabled 1.3.6.1.4.1.1916.1.39.1.8.1.2 truthvalue read-write
Enables the VM Tracking feature on a port. The VM Tracking feature is disabled by default
                   extremeVMPortConfigVMTrackingDynVlanEnabled 1.3.6.1.4.1.1916.1.39.1.8.1.3 truthvalue read-write
Enables the VM Tracking Dynamic VLAN feature on a port. This feature is disabled by default. VM Tracking feature must be enabled before enabling this feature.
       extremeVMVPP 1.3.6.1.4.1.1916.1.39.2
           extremeVMVPPTable 1.3.6.1.4.1.1916.1.39.2.1 no-access
This table contains Port Policies contained within this switch. Port Policies come in two variants: network and local. Network policies are downloaded from the FTP server; local policies reside only within a single switch.
               extremeVMVPPEntry 1.3.6.1.4.1.1916.1.39.2.1.1 no-access
An entry in the table of VM policy information of this device. This table is populated with two sets of policies, those downloaded from the policy server and those defined locally on this switch.
                   extremeVMVPPType 1.3.6.1.4.1.1916.1.39.2.1.1.1 integer no-access
The type of the port profile. Network port profiles are obtained from a central policy store. Local policies are specific to this particular switch. Enumeration: 'local': 2, 'network': 1.
                   extremeVMVPPName 1.3.6.1.4.1.1916.1.39.2.1.1.2 displaystring no-access
The name of the Port VPP. VPP names must be alpha-numeric and must start with an alpha character.
                   extremeVMVPPControl 1.3.6.1.4.1.1916.1.39.2.1.1.3 integer read-write
Performs the requested operation on this policy. synchronizeNow(1) will download a copy of the policy from the FTP server. (Network policies only) This object will return noOperation(2) if read. Enumeration: 'synchronizeNow': 1, 'noOperation': 2.
                   extremeVMVPPRowStatus 1.3.6.1.4.1.1916.1.39.2.1.1.4 rowstatus read-only
Only local VPPs can be created or deleted.
                   extremeVMVPPCounter 1.3.6.1.4.1.1916.1.39.2.1.1.5 counterdirection read-only
This object specifies whether the VM gets attached to this VPP needs to install dynamic counters to count packets source MAC address matches VM MAC for ingress, packets destination MAC address matches VM MAC for egress, packet source/destination MAC address matches VM MAC for both. If none option is chosen the dynamic counters will be uninstalled if it has been already installed, if not nothing happens.
                   extremeVMVPPVLANTag 1.3.6.1.4.1.1916.1.39.2.1.1.6 integer read-only
VLAN Tag for Dynamic VLAN creation. For unset the value of 0 can be configured during that extremeVMVPPVLANVRName also be set to null string. If this parameter is not configured then 0 will be displayed . While setting this object if extremeVMVPPVLANVRName is not set then that will be assumed to have default value of VR-Default.
                   extremeVMVPPVLANVRName 1.3.6.1.4.1.1916.1.39.2.1.1.7 displaystring read-only
The Virtual router name for Dynamic VLAN creation. VR-Mgmt cannot be specified and specified VR Name should be existing. By default VR-Default will be used. This object display non-null string only when extremeVMVPPVLANTag has non zero value. If this object is going to be configured after extremeVMVPPVLANTag has been configured for non zero value then this SET might be rejected if any of detected VM clients uses this VPP and these VPPs VR Name alone changes. Even though this object is specifically set to null string still this object display VR-Default if extremeVMVPPVLANTag has non zero value
           extremeVMMappingTable 1.3.6.1.4.1.1916.1.39.2.2 no-access
This table contains the mapping of port policies to virtual machine MAC addresses.
               extremeVMMappingEntry 1.3.6.1.4.1.1916.1.39.2.2.1 no-access
An entry in the table of VM information of this device.
                   extremeVMMappingType 1.3.6.1.4.1.1916.1.39.2.2.1.1 integer no-access
The type of mapping for this entry. A local mapping exists only on this specific switch. A network mapping is one obtained via a download of a mapping file. Enumeration: 'local': 2, 'network': 1.
                   extremeVMMappingMAC 1.3.6.1.4.1.1916.1.39.2.2.1.2 macaddress no-access
The MAC address associated with the Virtual Machine. Note that a VM may have multiple MAC addresses.
                   extremeVMMappingIngressVPPName 1.3.6.1.4.1.1916.1.39.2.2.1.3 displaystring read-only
The ingress policy associated with the VM/MAC address. Note that this may refer to a policy without a corresponding entry in the extremeVMVPPTable if a network policy mapping refers to a non-existent policy. This would indicate an error in the policy mapping file that is consulted if network authentication fails. When creating an entry in this table, this name must refer to an existing, valid, local policy. The creation of a mapping to a network policy is not permitted. Those mappings must be created at the central policy server.
                   extremeVMMappingEgressVPPName 1.3.6.1.4.1.1916.1.39.2.2.1.4 displaystring read-only
The egress policy associated with the VM/MAC address. Note that this may refer to a policy without a corresponding entry in the extremeVMVPPTable if a network policy mapping refers to a non-existent policy. This would indicate an error in the policy mapping file that is consulted if network authentication fails. When creating an entry in this table, this name must refer to an existing, valid, local policy. The creation of a mapping to a network policy is not permitted. Those mappings must be created at the central policy server.
                   extremeVMMappingStatus 1.3.6.1.4.1.1916.1.39.2.2.1.5 integer read-only
Indicates the virtual port profile mapping status. vppValid(1) -> When VPP mapped to this VM MAC does not have any policies associated with it (or) all the policies associated with this VPP can be applied (policy validation is success). Policy validation will happen only when this VM MAC is detected. vppMissing(2)-> This value is applicable only for network VM if the specified VPP Name was missing. vppInvalid(3)-> When any one of polices mapped to VPP cannot be applied (policy validation failed) because the policy file contains one or more errors that prevent it from being applied vppNotMaped(4)-> If the VM does not have any VPP Mapped. Enumeration: 'vppMissing': 2, 'vppInvalid': 3, 'vppValid': 1, 'vppNotMapped': 4.
                   extremeVMMappingRowStatus 1.3.6.1.4.1.1916.1.39.2.2.1.6 rowstatus read-only
Only local virtual port profiles can be created or deleted.
                   extremeVMMappingVPPName 1.3.6.1.4.1.1916.1.39.2.2.1.7 displaystring read-only
The virtual port profile associated with the VM/MAC address. When creating an entry in this table, this name must refer to an existing, valid, local profile. The creation of a mapping to a network profile is not permitted. Those mappings must be created at the central policy server.
                   extremeVMMappingVLANTag 1.3.6.1.4.1.1916.1.39.2.2.1.8 integer read-only
VLAN Tag for Dynamic VLAN creation. For unset the value of 0 can be configured during that extremeVMMappingVLANVRName also be set to null string. If this parameter is not configured then 0 will be displayed . While setting this object if extremeVMMappingVLANVRName is not set then that will be assumed to have default value of VR-Default.
                   extremeVMMappingVLANVRName 1.3.6.1.4.1.1916.1.39.2.2.1.9 displaystring read-only
The Virtual router name for Dynamic VLAN creation. VR-Mgmt cannot be specified and specified VR Name should be existing. By default VR-Default will be used. This object display non-null string only when extremeVMMappingVLANTag has non zero value. If this object is going to be configured after extremeVMMappingVLANTag has been configured for non zero value then this SET might be rejected if any of detected VM clients uses this mapping and these mapping VR Name alone changes. Even though this object is specifically set to null string still this object display VR-Default if extremeVMVPPVLANTag has non zero value
           extremeVMVPP2PolicyTable 1.3.6.1.4.1.1916.1.39.2.3 no-access
This table contains the mapping of a VPP to individual Policies.
               extremeVMVPP2PolicyEntry 1.3.6.1.4.1.1916.1.39.2.3.1 no-access
An individual mapping of VPP to Policy.
                   extremeVMVPP2PolicyVPPName 1.3.6.1.4.1.1916.1.39.2.3.1.1 displaystring no-access
The name of the VPP
                   extremeVMVPP2PolicyPolicyName 1.3.6.1.4.1.1916.1.39.2.3.1.2 displaystring no-access
The name of the local policy
                   extremeVMVPP2PolicyType 1.3.6.1.4.1.1916.1.39.2.3.1.3 integer no-access
The type of policy Enumeration: 'policyFile': 1, 'dynamicACL': 2.
                   extremeVMVPP2PolicyOrder 1.3.6.1.4.1.1916.1.39.2.3.1.4 integer32 read-only
The order in which this policy will be executed
                   extremeVMVPP2PolicyRowStatus 1.3.6.1.4.1.1916.1.39.2.3.1.5 rowstatus read-only
The row status for this mapping.
           extremeVMVPPDetailTable 1.3.6.1.4.1.1916.1.39.2.4 no-access
This table contains the mapping of a VPP to individual Policies.
               extremeVMVPPDetailEntry 1.3.6.1.4.1.1916.1.39.2.4.1 no-access
A set of mappings from a VPP to one or more policies.
                   extremeVMVPPDetailVPPName 1.3.6.1.4.1.1916.1.39.2.4.1.1 displaystring no-access
The name of the VPP
                   extremeVMVPPDetailDirection 1.3.6.1.4.1.1916.1.39.2.4.1.2 integer no-access
The direction in which the policy will be applied Enumeration: 'ingress': 1, 'egress': 2.
                   extremeVMVPPDetailType 1.3.6.1.4.1.1916.1.39.2.4.1.3 integer no-access
The type of policy Enumeration: 'policyFile': 1, 'dynamicACL': 2.
                   extremeVMVPPDetailOrder 1.3.6.1.4.1.1916.1.39.2.4.1.4 integer32 no-access
The order in which this policy will be executed
                   extremeVMVPPDetailPolicyName 1.3.6.1.4.1.1916.1.39.2.4.1.5 displaystring no-access
The name of the local policy
                   extremeVMVPPDetailRowStatus 1.3.6.1.4.1.1916.1.39.2.4.1.6 rowstatus read-only
The row status for this mapping.
       extremeVMDetected 1.3.6.1.4.1.1916.1.39.3
           extremeVMDetectedNumber 1.3.6.1.4.1.1916.1.39.3.1 gauge32 read-only
The number of virtual machines detected on this switch.
           extremeVMDetectedTable 1.3.6.1.4.1.1916.1.39.3.2 no-access
This table contains the currently detected VMs on this switch.
               extremeVMDetectedEntry 1.3.6.1.4.1.1916.1.39.3.2.1 no-access
An entry in the table of VM information of this device.
                   extremeVMDetectedMAC 1.3.6.1.4.1.1916.1.39.3.2.1.1 macaddress no-access
The MAC address associated with the Virtual Machine. Note that a VM may have multiple MAC addresses.
                   extremeVMDetectedVMName 1.3.6.1.4.1.1916.1.39.3.2.1.2 displaystring read-only
The name of the Virtual Machine. Note that a VM authenticated locally may not have a name.
                   extremeVMDetectedIngressVPPName 1.3.6.1.4.1.1916.1.39.3.2.1.3 displaystring read-only
The name of the policy applied (or attempted to apply) to this virtual machine.
                   extremeVMDetectedEgressVPPName 1.3.6.1.4.1.1916.1.39.3.2.1.4 displaystring read-only
The name of the policy applied (or attempted to apply) to this virtual machine.
                   extremeVMDetectedIfIndex 1.3.6.1.4.1.1916.1.39.3.2.1.5 integer32 read-only
The value of ifIndex on which this virtual machine was detected.
                   extremeVMDetectedAdminStatus 1.3.6.1.4.1.1916.1.39.3.2.1.6 integer read-write
The administrative status of the Virtual Machine authentication. Setting this variable to authenticating(1) will force the re-authentication of the VM. This variable always returns idle(2) when read. Enumeration: 'idle': 2, 'authenticating': 1.
                   extremeVMDetectedOperStatus 1.3.6.1.4.1.1916.1.39.3.2.1.7 integer read-only
The authentication status of the VM authenticating(1) an authentication is currently in progress authenticatedNetwork(2) the VM has been authenticated by a network source authenticatedLocally(3) the VM bas been authenticated by the local database denied(4) the VM was either explicitly denied entry notAuthenticated(5) the authentication process timed out or was never attempted. Enumeration: 'authenticationDenied': 4, 'notAuthenticated': 5, 'authenticating': 1, 'authenticatedNetwork': 2, 'authenticatedLocally': 3.
                   extremeVMDetectedResultIngress 1.3.6.1.4.1.1916.1.39.3.2.1.8 integer read-only
Indicates the result of a VM entry into the network. Only below two values will be returned at any point of time. policyApplied(1) - all the ingress policies in the VPP was successfully applied to the port. policyNotApplied(2) - If any one of the ingress policies in the VPP was not applied to the port. If this value is returned then refer to extremeVMDetectedIngErrPolicies object for list of failed ingress policies. Enumeration: 'policyNotApplied': 2, 'policyNotMapped': 5, 'policyApplied': 1, 'policyNotFound': 4, 'policyInvalid': 3.
                   extremeVMDetectedResultEgress 1.3.6.1.4.1.1916.1.39.3.2.1.9 integer read-only
Indicates the result of a VM entry into the network. Only below two values will be returned at any point of time. policyApplied(1) - all the egress policies in the VPP was successfully applied to the port. policyNotApplied(2) - If any one of the egress policies in the VPP was not applied to the port. If this value is returned then refer to extremeVMDetectedEgrErrPolicies object for list of failed egress policies. Enumeration: 'policyNotApplied': 2, 'policyNotMapped': 5, 'policyApplied': 1, 'policyNotFound': 4, 'policyInvalid': 3.
                   extremeVMDetectedIngErrPolicies 1.3.6.1.4.1.1916.1.39.3.2.1.10 octet string read-only
Displays the list of failed ingress policies
                   extremeVMDetectedEgrErrPolicies 1.3.6.1.4.1.1916.1.39.3.2.1.11 octet string read-only
Displays the list of failed egress policies
                   extremeVMDetectedVPPName 1.3.6.1.4.1.1916.1.39.3.2.1.12 displaystring read-only
The name of the VPP applied (or attempted to apply) to this virtual machine.
                   extremeVMDetectedVPPResult 1.3.6.1.4.1.1916.1.39.3.2.1.13 integer read-only
Indicates the result of VPP associated with VM MAC. vppMapped(1) indicates that the named VPP was mapped. vppNotMapped(2) indicates that the no VPP was mapped. vppInvalid(3) indicates that the VPP mapped was invalid. vppMissing(4) indicates that the VPP mapped was missing. Enumeration: 'vppNotMapped': 2, 'vppInvalid': 3, 'vppMapped': 1, 'vppMissing': 4.
                   extremeVMDetectedCounterInstallResult 1.3.6.1.4.1.1916.1.39.3.2.1.14 counterdirection read-only
Indicates the result of whether dynamic counter installed for this VM. ingress-only(1) - Dynamic counters are installed to count packet source MAC address matches VM MAC. egress-only(2) - Dynamic counters are installed to count packet destination MAC address matches VM MAC. both(3) - Dynamic counters are installed to count packet source/destination MAC address matches VM MAC. none(0) - Dynamic counters are not installed.
                   extremeVMDetectedVMVLANTag 1.3.6.1.4.1.1916.1.39.3.2.1.15 integer read-only
VLAN Tag used for Dynamic VLAN creation for detected VM MAC. If this parameter is not configured then 0 will be displayed
                   extremeVMDetectedVMVLANVRName 1.3.6.1.4.1.1916.1.39.3.2.1.16 displaystring read-only
The Virtual router name of the Dynamic VLAN created for detected VM MAC.
       extremeVMNotificationObjects 1.3.6.1.4.1.1916.1.39.4
           extremeVMVPPSynchType 1.3.6.1.4.1.1916.1.39.4.1 vmvppsynchtype no-access
Indicates the type of policy
       extremeVMNotifications 1.3.6.1.4.1.1916.1.39.5
           extremeVMNotificationPrefix 1.3.6.1.4.1.1916.1.39.5.0
               extremeVMVPPSyncFailed 1.3.6.1.4.1.1916.1.39.5.0.1
A synchronization attempt failed.
               extremeVMVPPInvalid 1.3.6.1.4.1.1916.1.39.5.0.2
A virutal port profile definition is invalid, indicating it cannot be applied to a port.
               extremeVMMapped 1.3.6.1.4.1.1916.1.39.5.0.3
This notification is generated whenever a MAC is manually mapped to a local policy.
               extremeVMUnMapped 1.3.6.1.4.1.1916.1.39.5.0.4
This notification is generated whenever a MAC is manually unmapped to a local policy.
               extremeVMDetectResult 1.3.6.1.4.1.1916.1.39.5.0.5
This notification is generated after a VM is detected on a port and reflects the result of that operation.
               extremeVMUnDetectResult 1.3.6.1.4.1.1916.1.39.5.0.6
This notification is generated after a VM is undetected (removed) from a port.