EXTREME-CABLE-MIB: View SNMP OID List / Download MIB

VENDOR: EXTREME NETWORKS


 Home MIB: EXTREME-CABLE-MIB
Download as:   
SNMPv2-CONF, EXTREME-BASE-MIB, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 extremeCable 1.3.6.1.4.1.1916.1.24
Extreme-specific Cable objects
       extremeDiagConfigGroup 1.3.6.1.4.1.1916.1.24.1
           extremeDiagConfigTime 1.3.6.1.4.1.1916.1.24.1.1 displaystring read-write
Indicates the time at which the Diagnostics information will be collected for the ports which have Auto-Diagnostics configured. Time must be given in hh:mm:ss format where hh, mm and ss are in decimals
           extremeDiagConfigRoF 1.3.6.1.4.1.1916.1.24.1.2 integer read-write
Indicates whether a port should return to INIT state on Diagnostics Failure. If TRUE the port will be restarted even if the Diagnostics indicate a Failure. If FALSE the port will be moved to DIAG_FAIL state Enumeration: 'false': 2, 'true': 1.
       extremeDiagPortConfigTable 1.3.6.1.4.1.1916.1.24.2 no-access
Table, which contains the diagnostic configuration information for the ports
           extremeDiagPortConfigEntry 1.3.6.1.4.1.1916.1.24.2.1 no-access
Each row represents port related diagnostics configuration
               extremeDiagPortCfgPortIfIndex 1.3.6.1.4.1.1916.1.24.2.1.1 integer read-only
IfIndex of the Port for which the information in this row applies
               extremeDiagPortCfgMode 1.3.6.1.4.1.1916.1.24.2.1.2 integer read-only
The mode of operation. The port can be configured to have either manual diagnostics or auto-diagnostics collected. Enumeration: 'auto': 1, 'manual': 2.
               extremeDiagPortCfgStatus 1.3.6.1.4.1.1916.1.24.2.1.3 integer read-write
Specifies whether Diagnostics are enabled or disabled for the port. In the manual mode, enable and disable will disable the corresponding bit in the manual Diag portmask. Once the run command is given the Manual Diagnostics starts running. indicates the diagnostics for the port has failed. is a read-only value and cannot be used for setting the status of the port Enumeration: 'diagfail': 4, 'enable': 1, 'run': 3, 'disable': 2.
       extremeDiagPortDiagTable 1.3.6.1.4.1.1916.1.24.3 no-access
Table contains the diagnostic information for the ports
           extremeDiagPortDiagEntry 1.3.6.1.4.1.1916.1.24.3.1 no-access
Each row represents port related diagnostics information
               extremeDiagPortDiagPortIfIndex 1.3.6.1.4.1.1916.1.24.3.1.1 integer read-only
IfIndex of the Port for which the information in this row applies
               extremeDiagPortDiagMode 1.3.6.1.4.1.1916.1.24.3.1.2 integer read-only
The mode of operation. The port can be configured to have either manual diagnostics or auto-diagnostics collected. Enumeration: 'auto': 1, 'manual': 2.
               extremeDiagPortSpeed 1.3.6.1.4.1.1916.1.24.3.1.3 integer read-only
Specifies the speed of the port Enumeration: 'speed10': 1, 'speed100': 2, 'unknown': 4, 'speed1000': 3.
               extremeDiagPortSwapAB 1.3.6.1.4.1.1916.1.24.3.1.4 integer read-only
Specifies whether pairA pairB cables are swapped Enumeration: 'unknown': 3, 'swap': 1, 'noswap': 2.
               extremeDiagPortSwapCD 1.3.6.1.4.1.1916.1.24.3.1.5 integer read-only
Specifies whether pairC and pairD cables are swapped Enumeration: 'unknown': 3, 'swap': 1, 'noswap': 2.
               extremeDiagPortPairAPol 1.3.6.1.4.1.1916.1.24.3.1.6 integer read-only
Specifies the polarity of pairA cables Enumeration: 'positive': 1, 'negative': 2, 'unknown': 3.
               extremeDiagPortPairAFlen 1.3.6.1.4.1.1916.1.24.3.1.7 integer read-only
Specifies the distance of Fault in the pairA cables
               extremeDiagPortPairALen 1.3.6.1.4.1.1916.1.24.3.1.8 integer read-only
Specifies the length of the pairA cables
               extremeDiagPortPairASkew 1.3.6.1.4.1.1916.1.24.3.1.9 integer read-only
Skew of pairA cables with respect to the fastest pair
               extremeDiagPortPairAStatus 1.3.6.1.4.1.1916.1.24.3.1.10 integer read-only
Indicates whether pairA cables are properly terminated, short or open Enumeration: 'imperror': 4, 'terminated': 3, 'short': 2, 'open': 1, 'unknown': 5.
               extremeDiagPortPairBPol 1.3.6.1.4.1.1916.1.24.3.1.11 integer read-only
Specifies the polarity of pairB cables Enumeration: 'positive': 1, 'negative': 2, 'unknown': 3.
               extremeDiagPortPairBFlen 1.3.6.1.4.1.1916.1.24.3.1.12 integer read-only
Specifies the distance of Fault in the pairB cables
               extremeDiagPortPairBLen 1.3.6.1.4.1.1916.1.24.3.1.13 integer read-only
Specifies the length of the pairB cables
               extremeDiagPortPairBSkew 1.3.6.1.4.1.1916.1.24.3.1.14 integer read-only
Skew of pairB cables with respect to the fastest pair
               extremeDiagPortPairBStatus 1.3.6.1.4.1.1916.1.24.3.1.15 integer read-only
Indicates whether pairB cables are properly terminated, short or open Enumeration: 'imperror': 4, 'terminated': 3, 'short': 2, 'open': 1, 'unknown': 5.
               extremeDiagPortPairCPol 1.3.6.1.4.1.1916.1.24.3.1.16 integer read-only
Specifies the polarity of pairC cables Enumeration: 'positive': 1, 'negative': 2, 'unknown': 3.
               extremeDiagPortPairCFlen 1.3.6.1.4.1.1916.1.24.3.1.17 integer read-only
Specifies the distance of Fault in the pairC cables
               extremeDiagPortPairCLen 1.3.6.1.4.1.1916.1.24.3.1.18 integer read-only
Specifies the length of the pairC cables
               extremeDiagPortPairCSkew 1.3.6.1.4.1.1916.1.24.3.1.19 integer read-only
Skew of pairC cables with respect to the fastest pair
               extremeDiagPortPairCStatus 1.3.6.1.4.1.1916.1.24.3.1.20 integer read-only
Indicates whether pairC cables are properly terminated, short or open Enumeration: 'imperror': 4, 'terminated': 3, 'short': 2, 'open': 1, 'unknown': 5.
               extremeDiagPortPairDPol 1.3.6.1.4.1.1916.1.24.3.1.21 integer read-only
Specifies the polarity of pairD cables Enumeration: 'positive': 1, 'negative': 2, 'unknown': 3.
               extremeDiagPortPairDFlen 1.3.6.1.4.1.1916.1.24.3.1.22 integer read-only
Specifies the distance of Fault in the pairD cables
               extremeDiagPortPairDLen 1.3.6.1.4.1.1916.1.24.3.1.23 integer read-only
Specifies the length of the pairD cables
               extremeDiagPortPairDSkew 1.3.6.1.4.1.1916.1.24.3.1.24 integer read-only
Skew of pairD cables with respect to the fastest pair
               extremeDiagPortPairDStatus 1.3.6.1.4.1.1916.1.24.3.1.25 integer read-only
Indicates whether pairD cables are properly terminated, short or open Enumeration: 'imperror': 4, 'terminated': 3, 'short': 2, 'open': 1, 'unknown': 5.
               extremeDiagPortDateTime 1.3.6.1.4.1.1916.1.24.3.1.26 displaystring read-only
Date and time at which the Diagnostic information was collected
       extremeDiagPortStatsTable 1.3.6.1.4.1.1916.1.24.4 no-access
Table, which contains the diagnostic statistic information for the ports
           extremeDiagPortStatsEntry 1.3.6.1.4.1.1916.1.24.4.1 no-access
Each row represents port related diagnostics statistics information
               extremeDiagPortStatsPortIfIndex 1.3.6.1.4.1.1916.1.24.4.1.1 integer read-only
IfIndex of the Port for which the information in this row applies
               extremeDiagPortStatsNumDiag 1.3.6.1.4.1.1916.1.24.4.1.2 integer read-only
Number of times Diagnostics information collected for this port
               extremeDiagPortStatsNumSuccess 1.3.6.1.4.1.1916.1.24.4.1.3 integer read-only
Number of times Diagnostics for this port completed successfully without any errors
               extremeDiagPortStatsNumFail 1.3.6.1.4.1.1916.1.24.4.1.4 integer read-only
Number of times Diagnostics for this port Failed due to errors in the cable pairs
               extremeDiagPortStatsNumChange 1.3.6.1.4.1.1916.1.24.4.1.5 integer read-only
Number of times Diagnostics Changed for this port
               extremeDiagPortStatsNumAbort 1.3.6.1.4.1.1916.1.24.4.1.6 integer read-only
Number of times Diagnostics was aborted by the user for this port
 extremeCableTraps 1.3.6.1.4.1.1916.4.13
       extremeCableTrapsPrefix 1.3.6.1.4.1.1916.4.13.0
           extremeTrapDiagPortDiagnostics 1.3.6.1.4.1.1916.4.13.0.1
Indicates the status of Diagnostics for a port. The status indicates whether Diagnostics for a particular port failed