ETHERNET-MIB: View SNMP OID List / Download MIB

VENDOR: EXALT COMMUNICATIONS


 Home MIB: ETHERNET-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, ExaltComProducts, ExaltComm, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ethernet 1.3.6.1.4.1.25651.1.2.3.2.1
Ethernet interfaces.
     ethernetNumChannels 1.3.6.1.4.1.25651.1.2.3.2.1.3 gauge32 read-only
The maximum number of available ethernet channels.
     ethernetInterfaces 1.3.6.1.4.1.25651.1.2.3.2.1.4 no-access
Attributes for ethernet ports.
         ethernetInterface 1.3.6.1.4.1.25651.1.2.3.2.1.4.1 no-access
An entry in the Ethernet table.
             function 1.3.6.1.4.1.25651.1.2.3.2.1.4.1.1 ethernetfunctiont read-write
Ethernet port function.
             mode 1.3.6.1.4.1.25651.1.2.3.2.1.4.1.2 ethernetmodet read-write
Ethernet mode .
             alarm 1.3.6.1.4.1.25651.1.2.3.2.1.4.1.3 enablestatust read-write
Ethernet port alarm.
             mute 1.3.6.1.4.1.25651.1.2.3.2.1.4.1.4 enablestatust read-write
Ethernet can be muted, when there is a system/ethernet alarm. When MHS is enabled, the ethernet mute is termed as 'Auto', setting a value as 2, when MHS disabled, the value is restored
             rateConfig 1.3.6.1.4.1.25651.1.2.3.2.1.4.1.5 enablestatust read-write
Ethernet rate limit status, default is disabled
             rateType 1.3.6.1.4.1.25651.1.2.3.2.1.4.1.6 ethratelimittypet read-write
Ethernet rate limit type, default is KBPS
             rateLimit 1.3.6.1.4.1.25651.1.2.3.2.1.4.1.7 ethratelimitvaluet read-write
Ethernet rate limit type default is 64KBPS
             dhcp 1.3.6.1.4.1.25651.1.2.3.2.1.4.1.8 enablestatust read-write
DHCP (Enable/Disable) on port.
     ethernetLearning 1.3.6.1.4.1.25651.1.2.3.2.1.5 enablestatust read-write
Etherner Learning (Enable/Disable) on the switch
     ethernetMgmt 1.3.6.1.4.1.25651.1.2.3.2.1.6 ethernetmgmttypet read-write
Etherner Management Type (Inband/Out-of-Band/Port-to-Port/Legacy) for the switch
     ethernetFlowControl 1.3.6.1.4.1.25651.1.2.3.2.1.7 enablestatust read-write
Etherner Flow Control (Disable/Enable) on the switch
     commitEthernetSettings 1.3.6.1.4.1.25651.1.2.3.2.1.1000 displaystring read-write
The Commit ethernet command.
         locETHAlarms 1.3.6.1.4.1.25651.1.2.4.2.3.2.1 no-access
The Local Ethernet Interface Alarms.
             locEthAlarmsEntry 1.3.6.1.4.1.25651.1.2.4.2.3.2.1.1 no-access
Ethernet Alarms table Entry.
                 locEthAlarm 1.3.6.1.4.1.25651.1.2.4.2.3.2.1.1.1 alarmlevelt read-only
The Alarms state for the Local Ethernet Channel.
         remETHAlarms 1.3.6.1.4.1.25651.1.2.4.2.4.2.1 no-access
The Local Ethernet Interface Alarms.
             remEthAlarmsEntry 1.3.6.1.4.1.25651.1.2.4.2.4.2.1.1 no-access
Ethernet Alarms table Entry.
                 remEthAlarm 1.3.6.1.4.1.25651.1.2.4.2.4.2.1.1.1 alarmlevelt read-only
The Alarms state for the Remote Ethernet Channel.