ELTEX-MES-eltInterfaces: View SNMP OID List / Download MIB

VENDOR: ELTEX ENTERPRISE


 Home MIB: ELTEX-MES-eltInterfaces
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, ELTEX-MES, Q-BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 eltSwIfTable 1.3.6.1.4.1.35265.1.23.43.1 no-access
Switch media specific information and configuration of the device interfaces.
     eltSwIfEntry 1.3.6.1.4.1.35265.1.23.43.1.1 no-access
Defines the contents of each line in the eltSwIfTable table.
         eltSwIfIndex 1.3.6.1.4.1.35265.1.23.43.1.1.1 integer read-only
Index to the eltSwIfTable. The interface defined by a particular value of this index is the same interface as identified by the same value of ifIndex (MIB II).
         eltSwIfSfpOperationMode 1.3.6.1.4.1.35265.1.23.43.1.1.2 integer read-write
This variable indicates plugged in SFP transceiver operation mode. Enumeration: 'unknown': 3, 'fiber': 0, 'directAttach': 1, 'copperSfp': 2.
 eltSwIfUtilizationTable 1.3.6.1.4.1.35265.1.23.43.2 no-access
Switch ports utilization configuration and information.
     eltSwIfUtilizationEntry 1.3.6.1.4.1.35265.1.23.43.2.1 no-access
Defines the contents of each line in the eltSwIfUtilizationTable table.
         eltSwIfUtilizationIfIndex 1.3.6.1.4.1.35265.1.23.43.2.1.1 integer read-only
A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
         eltSwIfUtilizationAverageTime 1.3.6.1.4.1.35265.1.23.43.2.1.2 integer read-write
An average load time in seconds for which interface utilization is calculated.
         eltSwIfUtilizationCurrentInPkts 1.3.6.1.4.1.35265.1.23.43.2.1.3 counter read-only
The total number of all (UC, MC and BC) packets received on the interface during last 5 seconds.
         eltSwIfUtilizationCurrentInRate 1.3.6.1.4.1.35265.1.23.43.2.1.4 counter read-only
The inbound rate in kbit/sec on the interface during last 5 seconds.
         eltSwIfUtilizationCurrentOutPkts 1.3.6.1.4.1.35265.1.23.43.2.1.5 counter read-only
The total number of all (UC, MC and BC) packets sent out of the interface during last 5 seconds.
         eltSwIfUtilizationCurrentOutRate 1.3.6.1.4.1.35265.1.23.43.2.1.6 counter read-only
The outbound rate in kbit/sec on the interface during last 5 seconds.
         eltSwIfUtilizationAverageInPkts 1.3.6.1.4.1.35265.1.23.43.2.1.7 counter read-only
The total number of all (UC, MC and BC) packets received on the interface during configured load average time for this interface.
         eltSwIfUtilizationAverageInRate 1.3.6.1.4.1.35265.1.23.43.2.1.8 counter read-only
The inbound rate in kbit/sec on the interface during configured load average time for this interface.
         eltSwIfUtilizationAverageOutPkts 1.3.6.1.4.1.35265.1.23.43.2.1.9 counter read-only
The total number of all (UC, MC and BC) packets sent out of the interface during configured load average time for this interface.
         eltSwIfUtilizationAverageOutRate 1.3.6.1.4.1.35265.1.23.43.2.1.10 counter read-only
The outbound rate in kbit/sec on the interface during configured load average time for this interface.