DES-1526-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DES-1526-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 d_link 1.3.6.1.4.1.171
         dlink_products 1.3.6.1.4.1.171.10
               dlink_DES1526SeriesProd 1.3.6.1.4.1.171.10.60
                     DES_1526 1.3.6.1.4.1.171.10.60.1
                         companyCommGroup 1.3.6.1.4.1.171.10.60.1.1
                             commSetTable 1.3.6.1.4.1.171.10.60.1.1.1 no-access
A list of SNMP Set Community Entries
                                 commSetEntry 1.3.6.1.4.1.171.10.60.1.1.1.1 no-access
A list of SNMP Set Community properties
                                     commSetIndex 1.3.6.1.4.1.171.10.60.1.1.1.1.1 integer read-only
An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported.
                                     commSetName 1.3.6.1.4.1.171.10.60.1.1.1.1.2 displaystring read-write
The name of this SNMP Set Community Entry.
                                     commSetStatus 1.3.6.1.4.1.171.10.60.1.1.1.1.3 rowstatus read-write
The RowStatus for the Set Community entry.
                             commGetTable 1.3.6.1.4.1.171.10.60.1.1.2 no-access
A list of SNMP Get Community Entries
                                 commGetEntry 1.3.6.1.4.1.171.10.60.1.1.2.1 no-access
A list of SNMP Get Community properties
                                     commGetIndex 1.3.6.1.4.1.171.10.60.1.1.2.1.1 integer read-only
An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported.
                                     commGetName 1.3.6.1.4.1.171.10.60.1.1.2.1.2 displaystring read-write
The name of this SNMP Get Community Entry.
                                     commGetStatus 1.3.6.1.4.1.171.10.60.1.1.2.1.3 rowstatus read-write
The RowStatus for the Get Community entry.
                             commTrapTable 1.3.6.1.4.1.171.10.60.1.1.3 no-access
A list of SNMP Trap Community Entries
                                 commTrapEntry 1.3.6.1.4.1.171.10.60.1.1.3.1 no-access
A list of SNMP Trap Community properties
                                     commTrapIndex 1.3.6.1.4.1.171.10.60.1.1.3.1.1 integer read-only
An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported.
                                     commTrapName 1.3.6.1.4.1.171.10.60.1.1.3.1.2 displaystring read-write
The name of this SNMP Trap Community Entry.
                                     commTrapIpAddress 1.3.6.1.4.1.171.10.60.1.1.3.1.3 ipaddress read-write
The IP Address of this SNMP Trap Community Entry.
                                     commTrapVlanId 1.3.6.1.4.1.171.10.60.1.1.3.1.4 integer read-write
The Trap VLAN identifier of this SNMP Trap Community Entry. The value must be from 1 to 4094.
                                     commTrapSNMPBootup 1.3.6.1.4.1.171.10.60.1.1.3.1.5 integer read-write
Bootup trap Enumeration: 'disabled': 2, 'enabled': 1.
                                     commTrapSNMPTPLinkUpDown 1.3.6.1.4.1.171.10.60.1.1.3.1.6 integer read-write
Twisted Pair link up / link down trap Enumeration: 'disabled': 2, 'enabled': 1.
                                     commTrapSNMPFiberLinkUpDown 1.3.6.1.4.1.171.10.60.1.1.3.1.7 integer read-write
Fiber link up / link down trap Enumeration: 'disabled': 2, 'enabled': 1.
                                     commTrapTrapAbnormalTPRXError 1.3.6.1.4.1.171.10.60.1.1.3.1.9 integer read-write
Twisted Pair abnormal receive error trap Enumeration: 'disabled': 2, 'enabled': 1.
                                     commTrapTrapAbnormalTPTXError 1.3.6.1.4.1.171.10.60.1.1.3.1.10 integer read-write
Twisted Pair abnormal transmit error trap Enumeration: 'disabled': 2, 'enabled': 1.
                                     commTrapTrapAbnormalFiberRXError 1.3.6.1.4.1.171.10.60.1.1.3.1.11 integer read-write
Fiber abnormal receive error trap Enumeration: 'disabled': 2, 'enabled': 1.
                                     commTrapTrapAbnormalFiberTXError 1.3.6.1.4.1.171.10.60.1.1.3.1.12 integer read-write
Fiber abnormal transmit error trap Enumeration: 'disabled': 2, 'enabled': 1.
                                     commTrapTrapPOEPowerFail 1.3.6.1.4.1.171.10.60.1.1.3.1.13 integer read-write
PoE POWER Fail Enumeration: 'disabled': 2, 'enabled': 1.
                                     commTrapTrapPOEPortOvercurrent 1.3.6.1.4.1.171.10.60.1.1.3.1.14 integer read-write
PoE port Overcurrent Enumeration: 'disabled': 2, 'enabled': 1.
                                     commTrapTrapPOEPortShort 1.3.6.1.4.1.171.10.60.1.1.3.1.15 integer read-write
PoE port Shortcircuit Enumeration: 'disabled': 2, 'enabled': 1.
                                     commTrapStatus 1.3.6.1.4.1.171.10.60.1.1.3.1.16 rowstatus read-write
The RowStatus for the Trap Community entry.
                         companyMiscGroup 1.3.6.1.4.1.171.10.60.1.3
                             miscStatisticsReset 1.3.6.1.4.1.171.10.60.1.3.3 integer read-write
Resets the units statistics. A (1) resets the unit, a (2) does nothing. Enumeration: 'reset': 1, 'noop': 2.
                         companyConfigGroup 1.3.6.1.4.1.171.10.60.1.11
                               configVerSwPrimary 1.3.6.1.4.1.171.10.60.1.11.1 displaystring read-only
The software image version string
                               configVerHwChipSet 1.3.6.1.4.1.171.10.60.1.11.2 displaystring read-only
The hardware chipset version string
                               configPortTable 1.3.6.1.4.1.171.10.60.1.11.6 no-access
A list of interface entries used for enterprise specific configuration. The number of entries is given by the value of ifNumber. All interface entries are assumed to be Ethernet interafaces.
                                   configPortEntry 1.3.6.1.4.1.171.10.60.1.11.6.1 no-access
An enterprise specific interface entry.
                                       configPort 1.3.6.1.4.1.171.10.60.1.11.6.1.1 integer read-only
A unique value for each interface that correlates to ifIndex. Its value ranges between 1 and the value of ifNumber.
                                       configPortSpeed 1.3.6.1.4.1.171.10.60.1.11.6.1.2 integer read-write
The port's speed desired state. Enumeration: 'rate100M-Half': 5, 'auto': 2, 'rate10M-Full': 4, 'disable': 1, 'rate10M-Half': 3, 'rate100M-Full': 6.
                                       configPortOperStatus 1.3.6.1.4.1.171.10.60.1.11.6.1.3 integer read-only
The port's operating speed state. Enumeration: 'rate10M-Full': 3, 'rate100M-Half': 4, 'rate1G-Full': 7, 'down': 1, 'rate1G-Half': 6, 'rate10M-Half': 2, 'rate100M-Full': 5.
                                       configPortFlowControl 1.3.6.1.4.1.171.10.60.1.11.6.1.4 integer read-write
The port will avoid transmitting a new packet for the period of time specified in a received PAUSE packet when enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                       configPortFlowControlOper 1.3.6.1.4.1.171.10.60.1.11.6.1.5 integer read-only
The port's operating flow control state. Enumeration: 'disabled': 2, 'enabled': 1.
                                       configPortPriority 1.3.6.1.4.1.171.10.60.1.11.6.1.6 integer read-write
The port's current priority. Enumeration: 'high': 2, 'normal': 1.
                               configMirrorTable 1.3.6.1.4.1.171.10.60.1.11.8 no-access
A list of the Mirror
                                   configMirrorEntry 1.3.6.1.4.1.171.10.60.1.11.8.1 no-access
A Mirror entry containing the Mirror id and mode
                                       configMirrorId 1.3.6.1.4.1.171.10.60.1.11.8.1.1 integer read-only
An index that uniquely identifies an entry in the Mirror Table. One entries are currently supported.
                                       configMirrorMode 1.3.6.1.4.1.171.10.60.1.11.8.1.2 integer read-write
When deciding the mirroring source port, then Mirror mode will be available. Enumeration: 'disabled': 0, 'both': 3, 'Rx': 1, 'Tx': 2.
                                       configMirrorMon 1.3.6.1.4.1.171.10.60.1.11.8.1.3 integer read-write
When mirroring is enabled (configMirroringMode = ingress, egress, both), this identifies the mirroring monitoring port. This value has a valid range of 1 to ifNumber when enabled.
                                       configMirrorSrc 1.3.6.1.4.1.171.10.60.1.11.8.1.4 portlist read-write
When mirroring is enabled (configMirroringMode = ingress, egress, both), this identifies the mirroring source port. This value has a valid range of 1 to ifNumber when enbaled. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
                                       configMirrorStatus 1.3.6.1.4.1.171.10.60.1.11.8.1.5 rowstatus read-write
The RowStatus for the Mirror entry.
                               configSNMPEnable 1.3.6.1.4.1.171.10.60.1.11.9 integer read-write
Enable/Disable SNMP function. A (1) enables, a (2) disables. Enumeration: 'disabled': 2, 'enabled': 1.
                               configIpAssignmentMode 1.3.6.1.4.1.171.10.60.1.11.12 integer read-write
Indicates whether the device address is assigned by the user (manual), or DHCP, or Others(BootP). Enumeration: 'dhcp': 2, 'other': 3, 'manual': 1.
                               configPhysAddress 1.3.6.1.4.1.171.10.60.1.11.13 macaddress read-only
The interface's address at the protocol layer immediately 'below' the network layer in the protocol stack. This is the physical address for the end-station.
                               configPasswordAdmin 1.3.6.1.4.1.171.10.60.1.11.15 displaystring read-write
The adminstrator password
                               configIpAddress 1.3.6.1.4.1.171.10.60.1.11.16 ipaddress read-write
The IP Address for the RDU box.
                               configNetMask 1.3.6.1.4.1.171.10.60.1.11.17 ipaddress read-write
The network mask for the RDU box.
                               configGateway 1.3.6.1.4.1.171.10.60.1.11.18 ipaddress read-write
The Gatway Address for the unit.
                               configSave 1.3.6.1.4.1.171.10.60.1.11.19 integer read-write
Physically saves the current configuration to nvram. - use with care. (1) saves the configuration (2) does nothing. Enumeration: 'save': 1, 'noop': 2.
                               configRestoreDefaults 1.3.6.1.4.1.171.10.60.1.11.22 integer read-write
Restores the configuration of the unit to the original settings. Enumeration: 'restore': 1, 'noop': 2.
                         companyTVlanGroup 1.3.6.1.4.1.171.10.60.1.13
                               tvlanTable 1.3.6.1.4.1.171.10.60.1.13.1 no-access
A list of the VLANs
                                   tvlanEntry 1.3.6.1.4.1.171.10.60.1.13.1.1 no-access
A VLAN entry containing the VLAN id and name.
                                       tvlanId 1.3.6.1.4.1.171.10.60.1.13.1.1.1 integer read-only
The VLAN identifier. A maximum of 64 VLANs is supported. The value must be from 1 to 4094.
                                       tvlanMember 1.3.6.1.4.1.171.10.60.1.13.1.1.3 portlist read-write
The set of the device's member ports that belong to the VLAN. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
                                       tvlanUntaggedPorts 1.3.6.1.4.1.171.10.60.1.13.1.1.4 portlist read-write
If that bit has a value of '1' the outgoing frame on the egress port is untagged. If that bit has a value of '0' the outgoing frame on the egress port is tagged.
                                       tvlanStatus 1.3.6.1.4.1.171.10.60.1.13.1.1.5 integer read-write
The status of an entry in the VLAN Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available. Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4.
                               tvlanPortTable 1.3.6.1.4.1.171.10.60.1.13.2 no-access
A list of ports and their associated VLAN.
                                   tvlanPortEntry 1.3.6.1.4.1.171.10.60.1.13.2.1 no-access
Information pertaining to an individual port regarding to which VLAN it belongs.
                                       tvlanPortPortId 1.3.6.1.4.1.171.10.60.1.13.2.1.1 integer read-only
A port identifier that is in the range of 1 to ifNumber.
                                       tvlanPortVlanId 1.3.6.1.4.1.171.10.60.1.13.2.1.2 integer read-write
The default VLAN identifier.
                         companyPortTrunkGroup 1.3.6.1.4.1.171.10.60.1.14
                               portTrunkTable 1.3.6.1.4.1.171.10.60.1.14.1 no-access
A list of port trunks and their associated members.
                                   portTrunkEntry 1.3.6.1.4.1.171.10.60.1.14.1.1 no-access
A port trunk entry containing the trunk id and trunk members.
                                       portTrunkId 1.3.6.1.4.1.171.10.60.1.14.1.1.1 integer read-only
The port trunk identifier. The current range is from 1 to 4.
                                       portTrunkMember 1.3.6.1.4.1.171.10.60.1.14.1.1.2 portlist read-only
Trunk group 1 - 3 has eight members (Port 01/09/17 - 08/16/24). Trunk group 4 has two members (Port 25-26). Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
                                       portTrunkMemberValue 1.3.6.1.4.1.171.10.60.1.14.1.1.3 portlist read-write
A port trunk member value indicates which port is a member of the specified trunk. Valid values are in the range from 0 to ifNumber. A zero indicates that no port is contained in the specifed member. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
                                       portTrunkEnable 1.3.6.1.4.1.171.10.60.1.14.1.1.4 integer read-write
Enable/Disable Trunk group. A (1) enables, a (2) disables. Enumeration: 'disabled': 2, 'enabled': 1.
                           swFiberInsert 1.3.6.1.4.1.171.10.60.10.1
Fiber insert trap
                           swFiberRemove 1.3.6.1.4.1.171.10.60.10.2
Fiber remove trap
                           swFiberAbnormalRXError 1.3.6.1.4.1.171.10.60.10.3
Fiber abnormal rx error trap
                           swFiberAbnormalTXError 1.3.6.1.4.1.171.10.60.10.4
Fiber abnormal tx error trap
                           swTPAbnormalRXError 1.3.6.1.4.1.171.10.60.10.5
Twisted Pair abnormal rx error trap
                           swTPAbnormalTXError 1.3.6.1.4.1.171.10.60.10.6
Twisted Pair abnormal tx error trap