DASAN-NOTIFICATION: View SNMP OID List / Download MIB

VENDOR: DASAN CO.,LTD.


 Home MIB: DASAN-NOTIFICATION
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-MIB, SNMPv2-SMI, DASAN-GEPON-MIB, DASAN-SMI, DASAN-SWITCH-MIB, SLE-FAULTMGMT-MIB, SNMPv2-TC, DASAN-DHCP-MIB, DASAN-USER-MANAGEMENT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 portInstalled 1.3.6.1.4.1.6296.0.1
portI0nstalled trap send when portInstallStatus is enabled.
 portRemoved 1.3.6.1.4.1.6296.0.2
portInstalled trap send when portInstallStatus is disabled.
 powerOk 1.3.6.1.4.1.6296.0.3
Power status OK trap when powerStatus change from disable to enable.
 powerFail 1.3.6.1.4.1.6296.0.4
Power status fail trap when powerStatus change from enable to disable.
 fanOk 1.3.6.1.4.1.6296.0.5
Fan status OK trap when fanStatus change from disable to enable.
 fanFail 1.3.6.1.4.1.6296.0.6
Fan status fail trap when fanStatus change from enable to disable.
 powerInstalled 1.3.6.1.4.1.6296.0.7
Power Installed trap when power was installed.
 powerRemoved 1.3.6.1.4.1.6296.0.8
Power removed trap when power was removed.
 fanInstalled 1.3.6.1.4.1.6296.0.9
Fan Installed trap when fan was installed.
 fanRemoved 1.3.6.1.4.1.6296.0.10
Fan removed trap when fan was removed.
 bcastOver 1.3.6.1.4.1.6296.0.11
Broadcast packet over trap when Rx broadcast packet is over the given limit.
 cpuLoadOverThreshold 1.3.6.1.4.1.6296.0.12
The cpuLoadOverThreshold trap is sent when cpuLoad is over the given limit.
 cpuLoadFallThreshold 1.3.6.1.4.1.6296.0.13
The cpuLoadfallThreshold trap is sent when cpuLoad fall under the given limit.
 dhcpLeaseShortage 1.3.6.1.4.1.6296.0.14
DHCP User IP pool shortage when User's DHCPDISCOVER message arrive.
 portOverThreshold 1.3.6.1.4.1.6296.0.15
Port traffic over HighThreshold trap when port traffic is over the given limit.
 portFallThreshold 1.3.6.1.4.1.6296.0.16
Port traffic fall under HighThreshold trap when port traffic falls below the given limit.
 temperatureOverThreshold 1.3.6.1.4.1.6296.0.17
TemperatureOverThreshold Trap is sent when temperature is over the certain threshold.
 systemRestart 1.3.6.1.4.1.6296.0.18
SystemRestart Trap is sent when system is restarted by user. sleAutoResetBootReason is only used for auto-reset
 mfgdBlocked 1.3.6.1.4.1.6296.0.19
mfgdblocked Trap is sent when a certain mac address is denied by mac-flood-guard mechanism.
 mfgdReleased 1.3.6.1.4.1.6296.0.20
mfgdReleased Trap is sent when a certain mac address is permitted again by mac-flood-guard mechanism.
 ipConflict 1.3.6.1.4.1.6296.0.21
ipConflict Trap is sent when a certain IP address is shared among different users.
 dhcpIllegalEntry 1.3.6.1.4.1.6296.0.22
dhcpIllegalEntry trap is sent when illegal dhcp user is found.
 optionModuleInstalled 1.3.6.1.4.1.6296.0.23
optionModuleInstalled Trap is sent when option Module was installed.
 optionModuleRemoved 1.3.6.1.4.1.6296.0.24
optionModuleRemoved Trap is sent when option Module was removed.
 memoryOverThreshold 1.3.6.1.4.1.6296.0.25
MemoryOverThreshold trap is sent when used memory size is over the given limit and free memory size falls below the given limit.
 memoryFallThreshold 1.3.6.1.4.1.6296.0.26
MemoryFallThreshold trap is sent when free memory size is over the given limit.
 slotInstalled 1.3.6.1.4.1.6296.0.27
slotInstalledTrap Trap is sent when Board was installed.
 slotRemoved 1.3.6.1.4.1.6296.0.28
slotRemovedTrap Trap is sent when Board was removed.
 slotStateChange 1.3.6.1.4.1.6296.0.29
slotStateChangeTrap Trap is sent when Board State change.
 portCRCOverThreshold 1.3.6.1.4.1.6296.0.30
portCRCOverThreshold Trap is sent when the CRC count of port over threshold.
 portCRCFallThreshold 1.3.6.1.4.1.6296.0.31
portCRCOverThreshold Trap is sent when the CRC count of port fall threshold.
 temperatureHighOverThreshold 1.3.6.1.4.1.6296.0.32
The temperatureHighOverThreshold Trap is sent when temperature is over the high-threshold.
 temperatureHighFallThreshold 1.3.6.1.4.1.6296.0.33
The temperatureHighFallThreshold Trap is sent when temperature fall the high-threshold.
 temperatureLowOverThreshold 1.3.6.1.4.1.6296.0.34
The temperatureLowOverThreshold Trap is sent when 1st temperature is over the low-threshold.
 temperatureLowFallThreshold 1.3.6.1.4.1.6296.0.35
The temperatureLowFallThreshold Trap is sent when temperature fall under the low-threshold.
 userLogIn 1.3.6.1.4.1.6296.0.36
The user-login trap is sent when user login.
 userLogOut 1.3.6.1.4.1.6296.0.37
The user-logout trap is sent when user logout.
 restoreFactory 1.3.6.1.4.1.6296.0.38
The restoreFactory trap is sent when user initialize as factory defaults.
 cpuLoadHighOverThreshold 1.3.6.1.4.1.6296.0.39
The cpuloadHighOverThreshold Trap is sent when temperature is over the high-threshold.
 cpuLoadHighFallThreshold 1.3.6.1.4.1.6296.0.40
The cpuloadHighFallThreshold Trap is sent when temperature fall the high-threshold.
 cpuLoadLowOverThreshold 1.3.6.1.4.1.6296.0.41
The cpuloadLowOverThreshold Trap is sent when 1st temperature is over the low-threshold.
 cpuLoadLowFallThreshold 1.3.6.1.4.1.6296.0.42
The cpuloadLowFallThreshold Trap is sent when temperature fall under the low-threshold.
 dsSystemUpgradeChanged 1.3.6.1.4.1.6296.0.44
System NOS Upgrade status
 interfaceOperDown 1.3.6.1.4.1.6296.0.45
This trap indicates the interface oper down.
 interfaceOperUp 1.3.6.1.4.1.6296.0.46
This trap indicates the interface poer up.
 macLearnOverMax 1.3.6.1.4.1.6296.0.47
This trap indicates the count of L2 mac is over the max.
 macLearnOverMaxCleared 1.3.6.1.4.1.6296.0.48
This trap indicates the count of L2 mac is over the max is cleared
 interfaceMacLearnOverMax 1.3.6.1.4.1.6296.0.49
This trap indicates the count of interface's L2 mac is over the max.
 interfaceMacLearnOverMaxCleared 1.3.6.1.4.1.6296.0.50
This trap indicates the count of interface's L2 mac is over the max is cleared
 adslAtucPerfLofsThresh 1.3.6.1.4.1.6296.0.51
Loss of Framing threshold reached(ATUC).
 adslAtucPerfLossThresh 1.3.6.1.4.1.6296.0.52
Loss of signal threshold reached(ATUC).
 adslAtucPerfLprsThresh 1.3.6.1.4.1.6296.0.53
Loss of power threshold reached (ATUC).
 adslAtucPerfESsThresh 1.3.6.1.4.1.6296.0.54
Errored Seconds threshold reached (ATUC).
 adslAtucRateChange 1.3.6.1.4.1.6296.0.55
Changed atuc rate.
 adslAtucPerfLolsThresh 1.3.6.1.4.1.6296.0.56
Loss of Link threshold reached (ATUC).
 adslAturPerfLofsThresh 1.3.6.1.4.1.6296.0.61
Loss of Framing threshold reached(ATUR).
 adslAturPerfLossThresh 1.3.6.1.4.1.6296.0.62
Loss of signal threshold reached(ATUR).
 adslAturPerfLprsThresh 1.3.6.1.4.1.6296.0.63
Loss of power threshold reached (ATUR).
 adslAturPerfESsThresh 1.3.6.1.4.1.6296.0.64
Errored Seconds threshold reached (ATUR).
 vdslCPEChangeInfoTrap 1.3.6.1.4.1.6296.0.65
Trap is sent with CPE Serial No., Mac Address of CPE, after CPE serial change.
 vdslArulePacketDropTrap 1.3.6.1.4.1.6296.0.66
Packet Dropped by arule .
 portMododuleInstall 1.3.6.1.4.1.6296.0.69
port module install
 portMododuleRemove 1.3.6.1.4.1.6296.0.70
port module remove
 cfgdBlocked 1.3.6.1.4.1.6296.0.71
Cfgdblocked Trap is sent when a certain port is blocked by cpu-flood-guard mechanism.
 cfgdReleased 1.3.6.1.4.1.6296.0.72
CfgdReleased Trap is sent when a certain port is non-blocked by cpu-flood-guard mechanism.
 cfgdOverThreshold 1.3.6.1.4.1.6296.0.73
CfgdReleased Trap is sent when a certain port is over threshold by cpu-flood-guard mechanism.
 cfgdUnderThreshold 1.3.6.1.4.1.6296.0.74
CfgdReleased Trap is sent when a certain port is under threshold by cpu-flood-guard mechanism.
 sfgdBlocked 1.3.6.1.4.1.6296.0.75
Sfgdblocked Trap is sent when a certain port is blocked by system-flood-guard mechanism.
 sfgdReleased 1.3.6.1.4.1.6296.0.76
SfgdReleased Trap is sent when a certain port is non-blocked by system-flood-guard mechanism.
 sfgdOverThreshold 1.3.6.1.4.1.6296.0.77
SfgdReleased Trap is sent when a certain port is over threshold by system-flood-guard mechanism.
 sfgdUnderThreshold 1.3.6.1.4.1.6296.0.78
SfgdReleased Trap is sent when a certain port is under threshold by system-flood-guard mechanism.
 ppsControlBlocked 1.3.6.1.4.1.6296.0.79
PpsControlblocked Trap is sent when a certain port is blocked by PPS-Control mechanism.
 ppsControlReleased 1.3.6.1.4.1.6296.0.80
PpsControlReleased Trap is sent when a certain port is non-blocked by PPS-Control mechanism.
 ppsControlOverThreshold 1.3.6.1.4.1.6296.0.81
PpsControlReleased Trap is sent when a certain port is over threshold by PPS-Control mechanism.
 ppsControlUnderThreshold 1.3.6.1.4.1.6296.0.82
PpsControlReleased Trap is sent when a certain port is under threshold by PPS-Control mechanism.
 nosRemoteUpgradeRequest 1.3.6.1.4.1.6296.0.83
This trap indicates that the system received nos-remote-upgrade command.
 nosRemoteUpgradeSuccess 1.3.6.1.4.1.6296.0.84
This trap indicates that the NOS succeeded to upgrade NOS.
 nosRemoteUpgradeFailAbort 1.3.6.1.4.1.6296.0.85
This trap indicates that the system failed to upgrade NOS by user interrupt
 nosRemoteUpgradeFailHeaderError 1.3.6.1.4.1.6296.0.86
This trap indicates that the system failed to upgrade NOS, for NOS header-error.
 nosRemoteUpgradeFailDownloadError 1.3.6.1.4.1.6296.0.87
This trap indicates that the system failed to upgrade NOS, for NOS checksum-error
 nosRemoteUpgradeFailFlashError 1.3.6.1.4.1.6296.0.88
This trap indicates that the system failed to upgrade NOS, for flash operation
 nosRemoteUpgradeStart 1.3.6.1.4.1.6296.0.89
This trap indicates that the upgrade NOS process was started.
 systemDyingGasp 1.3.6.1.4.1.6296.0.90
This trap indicates that Dying-gasp for power fault.
 attackGuardBlock 1.3.6.1.4.1.6296.0.91
This trap indicates that some port is blocked by attack-guard.
 attackGuardUnBlock 1.3.6.1.4.1.6296.0.92
This trap indicates that some port is unblocked by attack-guard.
 fanPeriodicFault 1.3.6.1.4.1.6296.0.93
This trap indicates the fan status is fault in some period.
 remoteOamDyingGasp 1.3.6.1.4.1.6296.0.94
This trap indicates the remote oam entity is in dying-gasp .
 remoteOamDyingGaspRestoration 1.3.6.1.4.1.6296.0.95
This trap indicates the remote oam entity is restored.
 arpInspectInvalid 1.3.6.1.4.1.6296.0.96
This trap indicates the ARP inspection is invalided.
 systemSwitchover 1.3.6.1.4.1.6296.0.97
This trap indicates the system is switchover.
 boardChangeState 1.3.6.1.4.1.6296.0.98
This trap indicates the board state is changed.
 redConfigurationMisMatch 1.3.6.1.4.1.6296.0.99
Configurations of Active and Standby SFU are different.
 clockModuleInstalled 1.3.6.1.4.1.6296.0.105
clockModuleInstalled trap send when sleClockModuleInstallStatus is installed.
 clockModuleRemoved 1.3.6.1.4.1.6296.0.106
clockModuleRemoved trap send when sleClockModuleInstallStatus is removed.
 clockModuleInitOk 1.3.6.1.4.1.6296.0.107
clockModuleInitOk trap send when sleClockModuleInitStatus is ok.
 clockModuleInitFail 1.3.6.1.4.1.6296.0.108
clockModuleInitFail trap send when sleClockModuleInitStatus is failure.
 interfaceAdminUp 1.3.6.1.4.1.6296.0.109
This trap indicates the interface admin up.
 interfaceAdminDown 1.3.6.1.4.1.6296.0.110
This trap indicates the interface admin down.
 powerMonEventDetected 1.3.6.1.4.1.6296.0.111
This trap indicates the power monitoring detects voltage change of slot.
 ntpConnectionFail 1.3.6.1.4.1.6296.0.112
This trap indicates the ntp connection is lost.
 fanSpeedFallUnderThreshold 1.3.6.1.4.1.6296.0.113
This trap indicates the fan speed is under the threshold.
 fanSpeedRisingOverThreshold 1.3.6.1.4.1.6296.0.114
This trap indicates the fan speed is over the threshold.
 userLoginFail 1.3.6.1.4.1.6296.0.115
This trap indicates the user fail to login.
 bfdSessionStateChanged 1.3.6.1.4.1.6296.0.116
This trap indicates that BFD session state is changed.
 clockModuleOPModeChanged 1.3.6.1.4.1.6296.0.117
This trap indicate that slot Operation mode is changed.
 clockModuleRefrencesChanged 1.3.6.1.4.1.6296.0.118
This trap indicate that slot reference ntr is changed.
 portOperUp 1.3.6.1.4.1.6296.0.119
This trap indicate that port operation is up.
 portOperDown 1.3.6.1.4.1.6296.0.120
This trap indicate that port operation is down
 portRxOverThreshold 1.3.6.1.4.1.6296.0.121
Port Rx traffic over HighThreshold trap when port traffic is over the given limit.
 portRxFallThreshold 1.3.6.1.4.1.6296.0.122
Port Rx traffic fall under HighThreshold trap when port traffic falls below the given limit.
 portTxOverThreshold 1.3.6.1.4.1.6296.0.123
Port Tx traffic over HighThreshold trap when port traffic is over the given limit.
 portTxFallThreshold 1.3.6.1.4.1.6296.0.124
Port Tx traffic fall under HighThreshold trap when port traffic falls below the given limit.
 clockModuleInSrcStatusChanged 1.3.6.1.4.1.6296.0.125
This trap indicate that module status is changed.
 clockModuleInSrcAISStatusChanged 1.3.6.1.4.1.6296.0.126
This trap indicate that AIS status is changed.
 clockModuleInSrcLoSStatusChaged 1.3.6.1.4.1.6296.0.127
This trap indicate that LOS status is changed.
 clockModuleInSrcLDSCStatus 1.3.6.1.4.1.6296.0.128
This trap indicate that LDSC status is changed.
 clockModuleInSrcNtrClockChanged 1.3.6.1.4.1.6296.0.129
This trap indicate that NTR is changed.
 reloadMateSFU 1.3.6.1.4.1.6296.0.130
This trap indicate that reload mate SFU.
 processDown 1.3.6.1.4.1.6296.0.131
This trap indicate that certain process is crashed and restarted.
 processTimeout 1.3.6.1.4.1.6296.0.132
This trap indicate that certain process is timeout.
 sdcardInstalled 1.3.6.1.4.1.6296.0.133
This trap indicate that SD card is installed.
 sdcardRemoved 1.3.6.1.4.1.6296.0.134
This trap indicate that SD card is removed.
 bootedNonDefaultOS 1.3.6.1.4.1.6296.0.141
This trap indicate that the system started with non-default OS.
 slotBootedNonDefaultOS 1.3.6.1.4.1.6296.0.142
This trap indicate that the IU card started with non-default OS.
 cpuPpsOverThreshold 1.3.6.1.4.1.6296.0.145
The PPS of cpu is over the threshold.
 cpuPpsUnderThreshold 1.3.6.1.4.1.6296.0.146
The PPS of cpu is under the threshold.
 redundantPacketDetected 1.3.6.1.4.1.6296.0.147
Redundant packets is detected.
 redundantPacketDetectedCleared 1.3.6.1.4.1.6296.0.148
Redundant packets detection is cleared.
 ponLinkFault 1.3.6.1.4.1.6296.0.151
ONU reports a Link Fault via the flag in the 802.3ah OAM header.No further information about the fault is available..
 ponLos 1.3.6.1.4.1.6296.0.152
Loss of Signal is detected by the PHY device for OLT Network interface, and PON interfaces on the OLT and ONU.
 ponTransmitFail 1.3.6.1.4.1.6296.0.153
Transmitted output does not match input, as reported by EPON optics.
 ponTransmitDegrade 1.3.6.1.4.1.6296.0.154
Transmitted output has a high error level, but not so high as to cause - Failure. Optionallyreported by EPON optical module.
 ponQueueOverflow 1.3.6.1.4.1.6296.0.155
One of the queues for the link has dropped frames due to becoming full.
 ponMacLearningTableOverflow 1.3.6.1.4.1.6296.0.156
MAC address learning table is full, not in overwrite mode, and a new MAC address wasencountered.
 ponDuplicateMacRegistration 1.3.6.1.4.1.6296.0.157
MPCP register request received for MAC that is registered and in-service.
 ponReportTimeout 1.3.6.1.4.1.6296.0.158
ONU does not respond to grants from the OLT.
 ponGateTimeout 1.3.6.1.4.1.6296.0.159
Excessive interval between MPCP gates.
 ponOAMKeepaliveTimeout 1.3.6.1.4.1.6296.0.160
OAM KeepaliveTimeout - OAM layer does not receive periodic messages from its peer.
 ponKeyExchangeFailure 1.3.6.1.4.1.6296.0.161
The link peer has failed to generate a new key message, or to switch to the new key, in the timeallotted by the key exchange timer for this link. Encryption remains in force using the old key, and the key exchange process continues.The alarm will clear when a new key is established.
 ponAutoNegotiation 1.3.6.1.4.1.6296.0.162
OLT Network port fails to auto-negotiate with the peer (if auto-negotiation feature is enabled).
 ponLinkLoopback 1.3.6.1.4.1.6296.0.163
The link is currently in the loopback state.
 ponStandardDyingGasp 1.3.6.1.4.1.6296.0.164
ONU reports Dying Gasp via that bit in 802.3ah OAM header.
 ponPowerFail 1.3.6.1.4.1.6296.0.165
Power supply failure.
 ponTemperature 1.3.6.1.4.1.6296.0.166
Operating temperature range exceeded.
 ponAuthenticationInformationUnavailable 1.3.6.1.4.1.6296.0.167
ONU is configured to use external authentication device, and that device is not present.
 ponOctetsTransferred 1.3.6.1.4.1.6296.0.171
Octets Transferred.
 ponTotalFramesTransferred 1.3.6.1.4.1.6296.0.172
Total frames transferred.
 ponUnicastFramesTransferred 1.3.6.1.4.1.6296.0.173
Unicast frames transferred.
 ponBroadcastFramesTransferred 1.3.6.1.4.1.6296.0.174
Broadcast frames transferred.
 ponMulticastFramesTransferred 1.3.6.1.4.1.6296.0.175
Multicast frames transferred.
 ponCRC32Errors 1.3.6.1.4.1.6296.0.176
CRC-32 Errors.
 ponUndersizeFrames 1.3.6.1.4.1.6296.0.177
Undersize Frames.
 ponOversizeFrames 1.3.6.1.4.1.6296.0.178
Oversize Frames.
 ponCollisions 1.3.6.1.4.1.6296.0.179
Collisions.
 pon64OctetFrames 1.3.6.1.4.1.6296.0.180
64 Octet Frames.
 pon127OctetFrames 1.3.6.1.4.1.6296.0.181
65-127 Octet Frames.
 pon255OctetFrames 1.3.6.1.4.1.6296.0.182
128-255 Octet Frames.
 pon511OctetFrames 1.3.6.1.4.1.6296.0.183
256-511 Octet Frames.
 pon1023OctetFrames 1.3.6.1.4.1.6296.0.184
512-1023 Octet Frames.
 pon1518OctetFrames 1.3.6.1.4.1.6296.0.185
1024-1518 Octet Frames.
 pon1519OverOctetFrames 1.3.6.1.4.1.6296.0.186
1519+ Octet Frames.
 ponFramesDropped 1.3.6.1.4.1.6296.0.187
Frames dropped.
 ponOctetsDropped 1.3.6.1.4.1.6296.0.188
Octets dropped.
 ponOctetsDelayed 1.3.6.1.4.1.6296.0.189
Octets delayed.
 ponOctetsGranted 1.3.6.1.4.1.6296.0.190
Octets granted.
 ponOctetsGrantedButUnused 1.3.6.1.4.1.6296.0.191
Octets granted but unused.
 ponMaximumDelay 1.3.6.1.4.1.6296.0.192
Maximum Delay (units of 100usec).
 ponCRC8Errors 1.3.6.1.4.1.6296.0.193
CRC-8 (preamble) Errors.
 ponLineCodeErrors 1.3.6.1.4.1.6296.0.194
Line code errors
 ponPauseFrames 1.3.6.1.4.1.6296.0.195
Pause Frames
 ponErroredFrameSeconds 1.3.6.1.4.1.6296.0.196
Errored Frame Seconds
 ponErroredFramePeriod 1.3.6.1.4.1.6296.0.197
Errored Frame Period
 ponErroredFrameSecondsSummary 1.3.6.1.4.1.6296.0.198
Errored Frame Seconds Summary
 gponOnuRegistered 1.3.6.1.4.1.6296.0.200
Registered Onu Informations
 gponOnuDeregistered 1.3.6.1.4.1.6296.0.201
Deregistered Onu Informations
 swWatchdogDetectError 1.3.6.1.4.1.6296.0.202
S/W Watchdog Detect Error
 swWatchdogClearError 1.3.6.1.4.1.6296.0.203
S/W Watchdog Clear Error
 swWatchdogNormalState 1.3.6.1.4.1.6296.0.204
S/W Watchdog Normal State
 swWatchdogAbnomalState 1.3.6.1.4.1.6296.0.205
S/W Watchdog Abnormal State
 gponOnuUpgradeCompleted 1.3.6.1.4.1.6296.0.206
Upgrade Completed Onu Informations
 gponOltCableDown 1.3.6.1.4.1.6296.0.207
GPON Cable down event is detected.(This is not used for any product)
 gponOnuAutoToManual 1.3.6.1.4.1.6296.0.208
GPON Onu is auto-to-manual
 slotActionEvent 1.3.6.1.4.1.6296.0.209
This trap indicates the slot action event
 slotStateChanged 1.3.6.1.4.1.6296.0.210
This trap indicates the slot state is changed
 gponNoAuthONU 1.3.6.1.4.1.6296.0.211
No autheticated ONU
 gponDuplicateONU 1.3.6.1.4.1.6296.0.212
Duplicated ONU
 gponDyingGasp 1.3.6.1.4.1.6296.0.213
Dying Gasp of GPON ONU
 gponRogueOnu 1.3.6.1.4.1.6296.0.214
Found Rogue ONU.
 gponOnuBatteryEvent 1.3.6.1.4.1.6296.0.215
Battery Event.
 gponOnuBatteryEventCleared 1.3.6.1.4.1.6296.0.216
Battery Event is cleared.
 gponOnuPortOperStatus 1.3.6.1.4.1.6296.0.217
This trap indicates state of ONU Port Operation.
 gponTransceiverChanged 1.3.6.1.4.1.6296.0.218
This trap indicates GPON transceiver changed.
 gponOltLosOn 1.3.6.1.4.1.6296.0.219
This trap indicates state of OLT Loss Of Signal (on).
 gponOltLosOff 1.3.6.1.4.1.6296.0.220
This trap indicates state of OLT Loss Of Signal (off).
 gponOltLosiOn 1.3.6.1.4.1.6296.0.221
This trap indicates state of OLT Loss Of Signal for ONUi (on).
 gponOltLosiOff 1.3.6.1.4.1.6296.0.222
This trap indicates state of OLT Loss Of Signal for ONUi (off).
 gponDyingGaspOn 1.3.6.1.4.1.6296.0.223
This trap indicates Dying Gasp of GPON ONU (on).
 gponDyingGaspOff 1.3.6.1.4.1.6296.0.224
This trap indicates Dying Gasp of GPON ONU (off).
 slotErrorLEDChanged 1.3.6.1.4.1.6296.0.225
This trap indicates slot error LED changed.
 nmsConnectionTypeChanged 1.3.6.1.4.1.6296.0.226
This trap indicates NMS connection type changed.
 gponOntOSUpgradeStatus 1.3.6.1.4.1.6296.0.227
This trap indicates ONT OS upgrade status changes.
 gponOntBLUpgradeStatus 1.3.6.1.4.1.6296.0.228
This trap indicates ONT BL upgrade status changes.
 gponOntRxPowerLoss 1.3.6.1.4.1.6296.0.229
This trap indicates ONT port failed to detect Rx Power.
 gponOntRxPowerDetected 1.3.6.1.4.1.6296.0.230
This trap indicates ONT port detected Rx Power.
 gponOnuTemperatureHighOverThreshold 1.3.6.1.4.1.6296.0.231
This trap indicates the temperature of ONU is over high threshold.
 gponOnuTemperatureHighFallThreshold 1.3.6.1.4.1.6296.0.232
This trap indicates the temperature of ONU falls under high threshold.
 gponOnuTemperatureLowOverThreshold 1.3.6.1.4.1.6296.0.233
This trap indicates the temperature of ONU is over low threshold.
 gponOnuTemperatureLowFallThreshold 1.3.6.1.4.1.6296.0.234
This trap indicates the temperature of ONU falls under low threshold.
 gponOnuCpuOverThreshold 1.3.6.1.4.1.6296.0.235
This trap indicates the CPU-load of ONU is over threshold.
 gponOnuCpuFallThreshold 1.3.6.1.4.1.6296.0.236
This trap indicates the CPU-load of ONU falls under threshold.
 gponOnuMemoryOverThreshold 1.3.6.1.4.1.6296.0.237
This trap indicates the memory-utilization of ONU is over threshold.
 gponOnuMemoryFallThreshold 1.3.6.1.4.1.6296.0.238
This trap indicates the memory-utilization of ONU falls under threshold.
 gponOnuI2cFail 1.3.6.1.4.1.6296.0.239
This trap indicates that detect ONU's i2c fail.
 gponOnuRxOpticPowerLowThreshAlarmOn 1.3.6.1.4.1.6296.0.240
RX optic low power alarm is detected
 gponOnuRxOpticPowerLowThreshAlarmOff 1.3.6.1.4.1.6296.0.241
RX optic low power alarm is cleared
 gponOnuRxOpticPowerHighThreshAlarmOn 1.3.6.1.4.1.6296.0.242
RX Optic over power alarm is detected
 gponOnuRxOpticPowerHighThreshAlarmOff 1.3.6.1.4.1.6296.0.243
RX Optic over power alarm is cleared.
 gponOltLOFIOn 1.3.6.1.4.1.6296.0.244
OLT LOFI alarm is detected
 gponOltLOFIOff 1.3.6.1.4.1.6296.0.245
OLT LOFI alarm is cleared
 gponOltDOWOn 1.3.6.1.4.1.6296.0.246
OLT DOW alarm is detected
 gponOltDOWOff 1.3.6.1.4.1.6296.0.247
OLT DOW alarm is cleared
 gponOltSFOn 1.3.6.1.4.1.6296.0.248
OLT SF alarm is detected
 gponOltSFOff 1.3.6.1.4.1.6296.0.249
OLT SF alarm is cleared
 gponOltSDOn 1.3.6.1.4.1.6296.0.250
OLT SD alarm is detected
 gponOltSDOff 1.3.6.1.4.1.6296.0.251
OLT SD alarm is cleared
 gponOltLCDGIOn 1.3.6.1.4.1.6296.0.252
OLT LCDGI alarm is detected
 gponOltLCDGIOff 1.3.6.1.4.1.6296.0.253
OLT LCDGI alarm is cleared
 gponOltRDOn 1.3.6.1.4.1.6296.0.254
OLT RD alarm is detected
 gponOltRDOff 1.3.6.1.4.1.6296.0.255
OLT RD alarm is cleared
 gponOltSUFOn 1.3.6.1.4.1.6296.0.256
OLT SUF alarm is detected
 gponOltSUFOff 1.3.6.1.4.1.6296.0.257
OLT SUF alarm is cleared
 gponOltLOAOn 1.3.6.1.4.1.6296.0.258
OLT LOA alarm is detected
 gponOltLOAOff 1.3.6.1.4.1.6296.0.259
OLT LOA alarm is cleared
 gponOltLOAMIOn 1.3.6.1.4.1.6296.0.260
OLT LOAMI alarm is detected
 gponOltLOAMIOff 1.3.6.1.4.1.6296.0.261
OLT LOAMI alarm is cleared
 gponOltMEMOn 1.3.6.1.4.1.6296.0.262
OLT MEM alarm is detected
 gponOltMEMOff 1.3.6.1.4.1.6296.0.263
OLT MEM alarm is cleared
 gponOltPEEOn 1.3.6.1.4.1.6296.0.264
OLT PEE alarm is detected
 gponOltPEEOff 1.3.6.1.4.1.6296.0.265
OLT PEE alarm is cleared
 gponOltPSTOn 1.3.6.1.4.1.6296.0.266
OLT PST alarm is detected
 gponOltPSTOff 1.3.6.1.4.1.6296.0.267
OLT PST alarm is cleared
 gponOltERROn 1.3.6.1.4.1.6296.0.268
OLT alarm error is detected
 gponOltERROff 1.3.6.1.4.1.6296.0.269
OLT alarm error is cleared
 gponOltREIOn 1.3.6.1.4.1.6296.0.270
OLT REI alarm is detected
 gponOltREIOff 1.3.6.1.4.1.6296.0.271
OLT REI alarm is cleared.
 gponAntiSpoofingDupPortOn 1.3.6.1.4.1.6296.0.272
Anti spoofing duplication port alarm is detected
 gponAntiSpoofingDupPortOff 1.3.6.1.4.1.6296.0.273
Anti spoofing duplication port alarm is cleared
 gponRedundancySwitchOver 1.3.6.1.4.1.6296.0.274
Redundancy switch over
 gponDuplicatedRangingResponse 1.3.6.1.4.1.6296.0.275
Duplicated ranging response detection.
 gponOnuPortOpticModuleInstall 1.3.6.1.4.1.6296.0.276
ONU port optic module install detection.
 gponOnuPortOpticModuleRemove 1.3.6.1.4.1.6296.0.277
ONU port optic module removal detection.
 gponOnuOMCCProblemDetected 1.3.6.1.4.1.6296.0.278
ONU OMCC Problem is detected.
 gponOnuOMCCProblemCleared 1.3.6.1.4.1.6296.0.279
ONU OMCC Problem is cleared.
 gponOltFixedTcontAlarmOn 1.3.6.1.4.1.6296.0.280
OLT fixed tcont alarm is detected
 gponOltFixedTcontAlarmOff 1.3.6.1.4.1.6296.0.281
OLT fixed tcont alarm is cleared
 gponOltDynamicTcontAlarmOn 1.3.6.1.4.1.6296.0.282
OLT dynamic tcont alarm is detected.
 gponOltDynamicTcontAlarmOff 1.3.6.1.4.1.6296.0.283
OLT dynamic tcont alarm is cleared.
 gponOltPortCountAlarmOn 1.3.6.1.4.1.6296.0.284
OLT port count alarm is detected.
 gponOltPortCountAlarmOff 1.3.6.1.4.1.6296.0.285
OLT port count alarm is cleared.
 gponOltCableDownAlarmOn 1.3.6.1.4.1.6296.0.286
GPON Cable down event is detected
 gponOltCableDownAlarmOff 1.3.6.1.4.1.6296.0.287
GPON Cable down event is cleared
 gponOltDeactiveMonitorAlarmOn 1.3.6.1.4.1.6296.0.288
GPON deactive monitor alarm is on
 gponOltDeactiveMonitorAlarmOff 1.3.6.1.4.1.6296.0.289
GPON deactive monitor alarm is off
 gponOltDFION 1.3.6.1.4.1.6296.0.290
GPON OLT DFI is on
 gponOltDFIOFF 1.3.6.1.4.1.6296.0.291
GPON OLT DFI is off
 gponOltTransceiverPortChanged 1.3.6.1.4.1.6296.0.294
GPON OLT Transceiver alarm is changed
 gponOltRxOpticPowerHighThresOver 1.3.6.1.4.1.6296.0.295
GPON OLT power high threshold is over
 gponOltRxOpticPowerHighThresOverCleared 1.3.6.1.4.1.6296.0.296
GPON OLT power high threshold over is cleared
 gponOltRxOpticPowerLowThresUnder 1.3.6.1.4.1.6296.0.297
GPON OLT power low threshold is under
 gponOltRxOpticPowerLowThresUnderCleared 1.3.6.1.4.1.6296.0.298
GPON OLT power low threshold under is cleared
 oamRapsEastPortStatusChanged 1.3.6.1.4.1.6296.0.301
The east port status changed
 oamRapsWestPortStatusChanged 1.3.6.1.4.1.6296.0.302
The west port status changed
 oamURNodePortStatusChanged 1.3.6.1.4.1.6296.0.303
OAM uplink redundancy node's port status changed
 loopDetectBlocked 1.3.6.1.4.1.6296.0.320
This trap indicate the Port is blocked by loop-detect.
 loopDetectUnBlockedbyExpireTimer 1.3.6.1.4.1.6296.0.321
This trap indicate the Port is unblocked by loop-detect's expire timer.
 loopDetectUnBlockedbyLinkDown 1.3.6.1.4.1.6296.0.322
This trap indicate the Port is unblocked by loop-detect's link down.
 writeMemoryFailSeveralTimes 1.3.6.1.4.1.6296.0.341
This trap indicates the writing memory is failed 3 times
 writeMemoryFailSeveralTimesCleared 1.3.6.1.4.1.6296.0.342
This trap indicates the writing memory is ok
 emLogDefectCPUHighOver 1.3.6.1.4.1.6296.0.351
EM log about CPU load high over.
 emLogDefectCPUHighUnder 1.3.6.1.4.1.6296.0.352
EM log about CPU load high under.
 emLogTemperHighOver 1.3.6.1.4.1.6296.0.353
EM log about temperature high over.
 emLogTemperHighUnder 1.3.6.1.4.1.6296.0.354
EM log about temperature high under.
 emLogTemperLowUnder 1.3.6.1.4.1.6296.0.355
EM log about temperature low under (occured).
 emLogTemperLowOver 1.3.6.1.4.1.6296.0.356
EM log about temperature low under (cleared).
 emLogMemLowOver 1.3.6.1.4.1.6296.0.357
EM log about memory low over (cleared).
 emLogMemLowUnder 1.3.6.1.4.1.6296.0.358
EM log about memory low over (occured).
 emLogFanFail 1.3.6.1.4.1.6296.0.359
EM log about fan fail.
 emLogFanFailCleared 1.3.6.1.4.1.6296.0.360
EM log about fan fail cleared.
 emLogPhyCRCFail 1.3.6.1.4.1.6296.0.361
EM log about PHY CRC fail.
 emLogPhyCRCFailCleared 1.3.6.1.4.1.6296.0.362
EM log about PHY CRC fail cleared.
 emLogPhyDetectFail 1.3.6.1.4.1.6296.0.363
EM log about PHY detect fail.
 emLogPhyDetectFailCleared 1.3.6.1.4.1.6296.0.364
EM log about PHY detect fail cleared.
 emLogSFUMateInitFail 1.3.6.1.4.1.6296.0.365
EM log about SFU mate init fail
 emLogSFUMateInitFailCleared 1.3.6.1.4.1.6296.0.366
EM log about SFU mate init fail cleared
 emLogDaemonHealthBad 1.3.6.1.4.1.6296.0.367
EM log about daemon health bad
 emLogDaemonHealthBadCleared 1.3.6.1.4.1.6296.0.368
EM log about daemon health bad cleared
 emLogGPIURavenLinkDown 1.3.6.1.4.1.6296.0.369
EM log about GPIU raven link down
 emLogGPIURavenLinkDownCleared 1.3.6.1.4.1.6296.0.370
EM log about GPIU raven link down cleared
 bootSequenceConfigFile 1.3.6.1.4.1.6296.0.371
Boot Sequence Config File failed
 topologyChanged 1.3.6.1.4.1.6296.0.372
Topolgy changed
 configLoadFail 1.3.6.1.4.1.6296.0.373
Config load failed
 emlogFanRPMLow 1.3.6.1.4.1.6296.0.375
FAN RPM Low detected in EMLOG
 emlogFanRPMLowCleared 1.3.6.1.4.1.6296.0.376
FAN RPM Low cleared in EMLOG
 emlogNAKError 1.3.6.1.4.1.6296.0.377
NAK Error detected in EMLOG
 emlogNAKErrorCleared 1.3.6.1.4.1.6296.0.378
NAK Error cleared in EMLOG
 gponOnuAniVoltageLowThreshAlarmOn 1.3.6.1.4.1.6296.0.381
Voltage low threshold alarm on
 gponOnuAniVoltageLowThreshAlarmOff 1.3.6.1.4.1.6296.0.382
Voltage low threshold alarm off
 gponOnuAniVoltageHighThreshAlarmOn 1.3.6.1.4.1.6296.0.383
Voltage high threshold alarm on
 gponOnuAniVoltageHighThreshAlarmOff 1.3.6.1.4.1.6296.0.384
Voltage high threshold alarm off
 gponOnuAniTemperatureLowThreshAlarmOn 1.3.6.1.4.1.6296.0.385
Temperature low threshold alarm on
 gponOnuAniTemperatureLowThreshAlarmOff 1.3.6.1.4.1.6296.0.386
Temperature high threshold alarm off
 gponOnuAniTemperatureHighThreshAlarmOn 1.3.6.1.4.1.6296.0.387
Temperature high threshold alarm on
 gponOnuAniTemperatureHighThreshAlarmOff 1.3.6.1.4.1.6296.0.388
Temperature high threshold alarm off
 gponOnuAniTxBiasLowThreshAlarmOn 1.3.6.1.4.1.6296.0.389
TX-bias low threshold alarm on
 gponOnuAniTxBiasLowThreshAlarmOff 1.3.6.1.4.1.6296.0.390
TX-bias low threshold alarm off
 gponOnuAniTxBiasHighThreshAlarmOn 1.3.6.1.4.1.6296.0.391
TX-bias high threshold alarm on
 gponOnuAniTxBiasHighThreshAlarmOff 1.3.6.1.4.1.6296.0.392
TX-bias high threshold alarm off
 gponOnuAniTxpowerLowThreshAlarmOn 1.3.6.1.4.1.6296.0.393
TX-power low threshold alarm on
 gponOnuAniTxpowerLowThreshAlarmOff 1.3.6.1.4.1.6296.0.394
TX-power low threshold alarm off
 gponOnuAniTxpowerHighThreshAlarmOn 1.3.6.1.4.1.6296.0.395
TX-power high threshold alarm on
 gponOnuAniTxpowerHighThreshAlarmOff 1.3.6.1.4.1.6296.0.396
TX-power high threshold alarm off
 slotHealthStatusTimeout 1.3.6.1.4.1.6296.0.397
This trap indicates the slot health status time-out is occurred
 slotHealthStatusTimeoutCleared 1.3.6.1.4.1.6296.0.398
This trap indicates the slot health status time-out trap is cleared
 sfpDMIDiagTemperOverHighAlarm 1.3.6.1.4.1.6296.0.401
This trap indicates the temperature of sfp is over the high threshold.(Alarm)
 sfpDMIDiagTemperUnderHighAlarm 1.3.6.1.4.1.6296.0.402
This trap indicates the temperature of sfp is under the high threshold.(Alarm)
 sfpDMIDiagTemperUnderLowAlarm 1.3.6.1.4.1.6296.0.403
This trap indicates the temperature of sfp is under the low threshold.(Alarm)
 sfpDMIDiagTemperOverLowAlarm 1.3.6.1.4.1.6296.0.404
This trap indicates the temperature of sfp is over the low threshold.(Alarm)
 sfpDMIDiagTemperOverHighWarn 1.3.6.1.4.1.6296.0.405
This trap indicates the temperature of sfp is over the high threshold.(Warn)
 sfpDMIDiagTemperUnderHighWarn 1.3.6.1.4.1.6296.0.406
This trap indicates the temperature of sfp is under the high threshold.(Warn)
 sfpDMIDiagTemperUnderLowWarn 1.3.6.1.4.1.6296.0.407
This trap indicates the temperature of sfp is under the low threshold.(Warn)
 sfpDMIDiagTemperOverLowWarn 1.3.6.1.4.1.6296.0.408
This trap indicates the temperature of sfp is over the low threshold.(Warn)
 sfpDMIDiagVoltageOverHighAlarm 1.3.6.1.4.1.6296.0.409
This trap indicates the voltage of sfp is over the high threshold.(Alarm)
 sfpDMIDiagVoltageUnderHighAlarm 1.3.6.1.4.1.6296.0.410
This trap indicates the voltage of sfp is under the high threshold.(Alarm)
 sfpDMIDiagVoltageUnderLowAlarm 1.3.6.1.4.1.6296.0.411
This trap indicates the voltage of sfp is under the low threshold.(Alarm)
 sfpDMIDiagVoltageOverLowAlarm 1.3.6.1.4.1.6296.0.412
This trap indicates the voltage of sfp is over the low threshold.(Alarm)
 sfpDMIDiagVoltageOverHighWarn 1.3.6.1.4.1.6296.0.413
This trap indicates the voltage of sfp is over the high threshold.(Warn)
 sfpDMIDiagVoltageUnderHighWarn 1.3.6.1.4.1.6296.0.414
This trap indicates the voltage of sfp is under the high threshold.(Warn)
 sfpDMIDiagVoltageUnderLowWarn 1.3.6.1.4.1.6296.0.415
This trap indicates the voltage of sfp is under the low threshold.(Warn)
 sfpDMIDiagVoltageOverLowWarn 1.3.6.1.4.1.6296.0.416
This trap indicates the voltage of sfp is over the low threshold.(Warn)
 sfpDMIDiagTxBiasOverHighAlarm 1.3.6.1.4.1.6296.0.417
This trap indicates the TxBias of sfp is over the high threshold.(Alarm)
 sfpDMIDiagTxBiasUnderHighAlarm 1.3.6.1.4.1.6296.0.418
This trap indicates the TxBias of sfp is under the high threshold.(Alarm)
 sfpDMIDiagTxBiasUnderLowAlarm 1.3.6.1.4.1.6296.0.419
This trap indicates the TxBias of sfp is under the low threshold.(Alarm)
 sfpDMIDiagTxBiasOverLowAlarm 1.3.6.1.4.1.6296.0.420
This trap indicates the TxBias of sfp is over the low threshold.(Alarm)
 sfpDMIDiagTxBiasOverHighWarn 1.3.6.1.4.1.6296.0.421
This trap indicates the TxBias of sfp is over the high threshold.(Warn)
 sfpDMIDiagTxBiasUnderHighWarn 1.3.6.1.4.1.6296.0.422
This trap indicates the TxBias of sfp is under the high threshold.(Warn)
 sfpDMIDiagTxBiasUnderLowWarn 1.3.6.1.4.1.6296.0.423
This trap indicates the TxBias of sfp is under the low threshold.(Warn)
 sfpDMIDiagTxBiasOverLowWarn 1.3.6.1.4.1.6296.0.424
This trap indicates the TxBias of sfp is over the low threshold.(Warn)
 sfpDMIDiagTxPowerOverHighAlarm 1.3.6.1.4.1.6296.0.425
This trap indicates the TxPower of sfp is over the high threshold.(Alarm)
 sfpDMIDiagTxPowerUnderHighAlarm 1.3.6.1.4.1.6296.0.426
This trap indicates the TxPower of sfp is under the high threshold.(Alarm)
 sfpDMIDiagTxPowerUnderLowAlarm 1.3.6.1.4.1.6296.0.427
This trap indicates the TxPower of sfp is under the low threshold.(Alarm)
 sfpDMIDiagTxPowerOverLowAlarm 1.3.6.1.4.1.6296.0.428
This trap indicates the TxPower of sfp is over the low threshold.(Alarm)
 sfpDMIDiagTxPowerOverHighWarn 1.3.6.1.4.1.6296.0.429
This trap indicates the TxPower of sfp is over the high threshold.(Warn)
 sfpDMIDiagTxPowerUnderHighWarn 1.3.6.1.4.1.6296.0.430
This trap indicates the TxPower of sfp is under the high threshold.(Warn)
 sfpDMIDiagTxPowerUnderLowWarn 1.3.6.1.4.1.6296.0.431
This trap indicates the TxPower of sfp is under the low threshold.(Warn)
 sfpDMIDiagTxPowerOverLowWarn 1.3.6.1.4.1.6296.0.432
This trap indicates the TxPower of sfp is over the low threshold.(Warn)
 sfpDMIDiagRxPowerOverHighAlarm 1.3.6.1.4.1.6296.0.433
This trap indicates the RxPower of sfp is over the high threshold.(Alarm)
 sfpDMIDiagRxPowerUnderHighAlarm 1.3.6.1.4.1.6296.0.434
This trap indicates the RxPower of sfp is under the high threshold.(Alarm)
 sfpDMIDiagRxPowerUnderLowAlarm 1.3.6.1.4.1.6296.0.435
This trap indicates the RxPower of sfp is under the low threshold.(Alarm)
 sfpDMIDiagRxPowerOverLowAlarm 1.3.6.1.4.1.6296.0.436
This trap indicates the RxPower of sfp is over the low threshold.(Alarm)
 sfpDMIDiagRxPowerOverHighWarn 1.3.6.1.4.1.6296.0.437
This trap indicates the RxPower of sfp is over the high threshold.(Warn)
 sfpDMIDiagRxPowerUnderHighWarn 1.3.6.1.4.1.6296.0.438
This trap indicates the RxPower of sfp is under the high threshold.(Warn)
 sfpDMIDiagRxPowerUnderLowWarn 1.3.6.1.4.1.6296.0.439
This trap indicates the RxPower of sfp is under the low threshold.(Warn)
 sfpDMIDiagRxPowerOverLowWarn 1.3.6.1.4.1.6296.0.440
This trap indicates the RxPower of sfp is over the low threshold.(Warn)
 gponOnuOnuServiceOpModeAlarm 1.3.6.1.4.1.6296.0.441
GPON ONU service operational mode alarm.
 gponOnuOnuServiceOpModeAlarmOff 1.3.6.1.4.1.6296.0.442
GPON ONU service operational mode cleared alarm.
 systemTemperPowerCutOff 1.3.6.1.4.1.6296.0.443
This trap indicates the system temperature power cut off
 systemTemperPowerCutoffCleared 1.3.6.1.4.1.6296.0.444
This trap indicates the system temperature power cut off trap is cleared
 slotTemperPowerCutOff 1.3.6.1.4.1.6296.0.445
This trap indicates the slot temperature power cut off
 slotTemperPowerCutOffCleared 1.3.6.1.4.1.6296.0.446
This trap indicates the slot temperature power cut off is cleared
 gponOnuAuthErrorReasonUpdated 1.3.6.1.4.1.6296.0.461
This trap indicates GPON ONU authentication error reason is updated
 ponRegErr 1.3.6.1.4.1.6296.0.501
This trap indicates the pon registration is not ok
 ponBadEncryptionKey 1.3.6.1.4.1.6296.0.502
This trap indicates the pon encryption key is bad
 ponLloidMismatch 1.3.6.1.4.1.6296.0.503
This trap indicates the pon LLOID is mismatched
 ponTooManyOnu 1.3.6.1.4.1.6296.0.504
This trap indicates the pon has too many of ONU
 ponDyingGasp 1.3.6.1.4.1.6296.0.505
This trap indicates the pon dying GASP
 ponRegister 1.3.6.1.4.1.6296.0.506
This trap indicates the pon is registered
 ponDeregister 1.3.6.1.4.1.6296.0.507
This trap indicates the pon is deregistered
 ponLastOnuDeregister 1.3.6.1.4.1.6296.0.508
This trap indicates the last ONU is deregistered
 ponCableDown 1.3.6.1.4.1.6296.0.509
This trap indicates the pon cable is down
 ponCableDownRecover 1.3.6.1.4.1.6296.0.510
This trap indicates the pon cable down is recovered
 ponFirstRegistration 1.3.6.1.4.1.6296.0.511
This trap indicates the first pon registration
 ponOntLinkUp 1.3.6.1.4.1.6296.0.512
This trap indicates the ont link up
 ponOltOnuDown 1.3.6.1.4.1.6296.0.513
This trap indicates the Onu down
 ponHealthCheckErr 1.3.6.1.4.1.6296.0.514
This trap indicates the pon health check error
 ponRegisterModeChange 1.3.6.1.4.1.6296.0.515
This trap indicates the pon register mode is changed
 ponOpticSignalErr 1.3.6.1.4.1.6296.0.516
This trap indicates the pon optic signal error
 ponOpticSignalErrRecover 1.3.6.1.4.1.6296.0.517
This trap indicates the pon optic signal error is recovered
 ponOverVolSigErr 1.3.6.1.4.1.6296.0.518
This trap indicates the pon over volatage signal error
 ponOverVolSigErrRecover 1.3.6.1.4.1.6296.0.519
This trap indicates the pon over volatage signal error is recovered
 ponOnuRssiInfoErr 1.3.6.1.4.1.6296.0.520
This trap indicates the Onu RSSI information error
 ponOnuRssiInfoErrCleared 1.3.6.1.4.1.6296.0.521
This trap indicates the Onu RSSI information error is cleard
 ponOnuCrcUpAlarmErr 1.3.6.1.4.1.6296.0.522
This trap indicates the ONU CRC up alarm error
 ponOnuCrcUpAlarmErrCleared 1.3.6.1.4.1.6296.0.523
This trap indicates the ONU CRC up alarm error is cleared
 ponOnuCrcDownAlarmErr 1.3.6.1.4.1.6296.0.524
This trap indicates the ONU CRC down alarm error
 ponOnuCrcDownAlarmErrCleared 1.3.6.1.4.1.6296.0.525
This trap indicates the ONU CRC down alarm error is cleared
 ponOnuTooFrequentlyRegErr 1.3.6.1.4.1.6296.0.526
This trap indicates the ONU is registered too frequently.
 ponOnuTooFrequentlyRegErrCleared 1.3.6.1.4.1.6296.0.527
This trap indicates the ONU registration frequently error is cleared.
 ponOnuOpticPowerAlarmErr 1.3.6.1.4.1.6296.0.528
This trap indicates the pon ONU optic power alarm error
 ponOnuOpticPowerAlarmErrCleared 1.3.6.1.4.1.6296.0.529
This trap indicates the pon ONU optic power alarm error is cleared
 ponOnuDcVoltageAlarmErr 1.3.6.1.4.1.6296.0.530
This trap indicates the pon ONU DC voltage alarm error
 ponOnuDcVoltageAlarmErrCleared 1.3.6.1.4.1.6296.0.531
This trap indicates the pon ONU DC voltage alarm error is cleared
 ponOnuLoopingAlarmErr 1.3.6.1.4.1.6296.0.532
This trap indicates the pon ONU looping alarm error
 ponOnuLoopingAlarmErrCleared 1.3.6.1.4.1.6296.0.533
This trap indicates the pon ONU looping alarm error is cleared
 ponDetectRogueOnu 1.3.6.1.4.1.6296.0.534
This trap indicates the Rogue ONU detection.
 ponDetectRogueOnuCleared 1.3.6.1.4.1.6296.0.535
This trap indicates the Rogue ONU detection is cleared.
 ponDetectRogueOnuPowerOff 1.3.6.1.4.1.6296.0.536
This trap indicates the Rogue ONU power off is detected.
 ponDetectRogueOnuDeregisterSuccess 1.3.6.1.4.1.6296.0.537
This trap indicates the Rogue ONU deregister success is detected
 ponDectectRogueOnuFoundFailed 1.3.6.1.4.1.6296.0.538
This trap indicates the Rogue ONU found fail is detected.
 ponDectectRogueOnuTurn 1.3.6.1.4.1.6296.0.539
This trap indicates the Rogue ONU turn is detected.
 ponOltStandbyRxpowerOverHigh 1.3.6.1.4.1.6296.0.540
This trap indicates the Olt standby RX power is over high threshold
 ponOltStandbyRxpowerUnderLow 1.3.6.1.4.1.6296.0.541
This trap indicates the Olt standby RX power is under low threshold
 ponOltRedundancyPortDown 1.3.6.1.4.1.6296.0.542
This trap indicates the Olt redundancy port is down
 ponOltRedundancyRxpower 1.3.6.1.4.1.6296.0.543
This trap indicates the Olt redundancy RXpower
 ponOnuBcastStormLlidUpErr 1.3.6.1.4.1.6296.0.544
This trap indicates the broadcast storm llid up error
 ponOnuBcastStormLlidUpErrCleared 1.3.6.1.4.1.6296.0.545
This trap indicates the broadcast storm llid up error is cleared
 ponOnuBcastStormLlidDownErr 1.3.6.1.4.1.6296.0.546
This trap indicates the broadcast storm llid down error
 ponOnuBcastStormLlidDownErrCleared 1.3.6.1.4.1.6296.0.547
This trap indicates the broadcast storm llid down error is cleared
 ponOnuBcastStormUniUpErr 1.3.6.1.4.1.6296.0.548
This trap indicates the broadcast storm UNI up error
 ponOnuBcastStormUniUpErrCleared 1.3.6.1.4.1.6296.0.549
This trap indicates the broadcast storm Uni up error is cleared
 ponOnuReset 1.3.6.1.4.1.6296.0.550
This trap indicates Pon ONU reset
 ponOnuLifLcErrAlarmErr 1.3.6.1.4.1.6296.0.551
This trap indicates Pon ONU LIF Error
 ponOnuLifLcErrAlarmErrCleared 1.3.6.1.4.1.6296.0.552
This trap indicates Pon ONU LIF Error is cleared
 ponOltResetPonMac 1.3.6.1.4.1.6296.0.561
This trap indicates Pon OLT MAC reset
 ponOltRedSwitchover 1.3.6.1.4.1.6296.0.581
This trap indicates the OLT redundancy switchover
 ponOltRedGroupCreated 1.3.6.1.4.1.6296.0.582
This trap indicates the OLT redundancy group is created
 ponOltRedGroupDeleted 1.3.6.1.4.1.6296.0.583
This trap indicates the OLT redundancy group is deleted
 ponOltRedTriggerChanged 1.3.6.1.4.1.6296.0.584
This trap indicates the OLT redundancy trigger is changed
 ponOltRedDbResyncChanged 1.3.6.1.4.1.6296.0.585
This trap indicates the OLT redundancy DB resync is changed
 ponOltRedDbSyncChecked 1.3.6.1.4.1.6296.0.586
This trap indicates the OLT redundancy DB sync is checked
 ponOnuRssiWarn 1.3.6.1.4.1.6296.0.601
This trap indicates the ONU RSSI warning
 ponOnuRssiWarnCleared 1.3.6.1.4.1.6296.0.602
This trap indicates the ONU RSSI warning is cleared
 ponOnuRssiAlarm 1.3.6.1.4.1.6296.0.603
This trap indicates the ONU RSSI alarm
 ponOnuRssiAlarmCleared 1.3.6.1.4.1.6296.0.604
This trap indicates the ONU RSSI alarm is cleared
 ponOnuRxpowerWarn 1.3.6.1.4.1.6296.0.605
This trap indicates the ONU RX-power warning
 ponOnuRxpowerWarnCleared 1.3.6.1.4.1.6296.0.606
This trap indicates the ONU RX-power warning is cleared
 ponOnuRxpowerAlarm 1.3.6.1.4.1.6296.0.607
This trap indicates the ONU RX-power alarm
 ponOnuRxpowerAlarmCleared 1.3.6.1.4.1.6296.0.608
This trap indicates the ONU RX-power alarm is cleared
 ponMacTableOverFlow 1.3.6.1.4.1.6296.0.609
This trap indicates the Mac table is over Max entry.
 ponMacTableOverFlowCleared 1.3.6.1.4.1.6296.0.610
This trap indicates the Mac over max entry is cleared.
 fiberLengthChangedWarningAlarm 1.3.6.1.4.1.6296.0.611
This trap indicates the fiber length is changed
 fiberLengthChangedWarningAlarmCleared 1.3.6.1.4.1.6296.0.612
This trap indicates the fiber length trap is cleared
 ponOnuFrameReplicationAlarm 1.3.6.1.4.1.6296.0.613
This trap indicates the frame is replicated.
 ponOnuFrameReplicationAlarmCleared 1.3.6.1.4.1.6296.0.614
This trap indicates the frame is replicated.
 ponOnuRxpowerWarnOverHigh 1.3.6.1.4.1.6296.0.615
This trap indicates the ONU RX-power high over warning
 ponOnuRxpowerWarnOverHighCleared 1.3.6.1.4.1.6296.0.616
This trap indicates the ONU RX-power high over warning is cleared
 ponOnuRxpowerWarnUnderLow 1.3.6.1.4.1.6296.0.617
This trap indicates the ONU RX-power low under warning
 ponOnuRxpowerWarnUnderLowCleared 1.3.6.1.4.1.6296.0.618
This trap indicates the ONU RX-power low under warning is cleared
 ponOnuRxpowerAlarmOverHigh 1.3.6.1.4.1.6296.0.619
This trap indicates the ONU RX-power high over alarm
 ponOnuRxpowerAlarmOverHighCleared 1.3.6.1.4.1.6296.0.620
This trap indicates the ONU RX-power high over alarm is cleared
 ponOnuRxpowerAlarmUnderLow 1.3.6.1.4.1.6296.0.621
This trap indicates the ONU RX-power low under alarm
 ponOnuRxpowerAlarmUnderLowCleared 1.3.6.1.4.1.6296.0.622
This trap indicates the ONU RX-power low under alarm is cleared
 ponOnuUniLinkDown 1.3.6.1.4.1.6296.0.623
This trap indicates the Onu Uni link is down.
 ponOnuUniLinkUp 1.3.6.1.4.1.6296.0.624
This trap indicates the Onu Uni link is up.