CYCLADES-ACS-CONF-MIB: View SNMP OID List / Download MIB

VENDOR: CYCLADES CORPORATION


 Home MIB: CYCLADES-ACS-CONF-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cyACSConf 1.3.6.1.4.1.2925.4.2
This module defines objects for the ACS/TS configuration
     cyHostName 1.3.6.1.4.1.2925.4.2.1 displaystring read-write
The Host Name
     cyConsoleBanner 1.3.6.1.4.1.2925.4.2.2 displaystring read-write
The console banner
     cyMotd 1.3.6.1.4.1.2925.4.2.3 displaystring read-write
The motd message
     cyEthItf 1.3.6.1.4.1.2925.4.2.4
The configuration of the Ethernet Interface
         cyEthDhcpc 1.3.6.1.4.1.2925.4.2.4.1 integer read-write
The ACS can request all of its ethernet parameters to a DHCP server Enumeration: 'active': 1, 'restore': 2, 'inactive': 0.
         cyEthIPaddr 1.3.6.1.4.1.2925.4.2.4.2 ipaddress read-write
This is the IP address of the Ethernet Interface
         cyEthIPmask 1.3.6.1.4.1.2925.4.2.4.3 ipaddress read-write
The mask fot the Ethernet network
         cyEthMTU 1.3.6.1.4.1.2925.4.2.4.4 integer32 read-write
The Maximum Transmission Unit size, wich determines whether or not packets should be broken up
         cyEthIPaddr2 1.3.6.1.4.1.2925.4.2.4.5 ipaddress read-write
The Ethernet secondary IP address
         cyEthIPmask2 1.3.6.1.4.1.2925.4.2.4.6 ipaddress read-write
The Ethernet secondary IP mask
     cyNameService 1.3.6.1.4.1.2925.4.2.5
The Name Service configuration
         cyResolverOrder 1.3.6.1.4.1.2925.4.2.5.1 displaystring read-write
It specifies how host lookups are to be performed. Valid values : empty, 'hosts', 'bind', 'hosts, bind', 'bind, hosts'
         cyMultipleIP 1.3.6.1.4.1.2925.4.2.5.2 displaystring read-write
Valid values are ON or OFF. If set to ON, the resolve library will return all valid addresses for a host that appears in the /etc/hosts file, instead of only the first.
         cyDNSserv 1.3.6.1.4.1.2925.4.2.5.3
The DNS server configuration
             cyDNSpriserv 1.3.6.1.4.1.2925.4.2.5.3.1 ipaddress read-write
Internet Address (in dot notation) of primary name server that the resolver should query.
             cyDNSsecserv 1.3.6.1.4.1.2925.4.2.5.3.2 ipaddress read-write
Internet Address (in dot notation) of secondary name server that the resolver should query.
             cyDNSdomain 1.3.6.1.4.1.2925.4.2.5.3.3 displaystring read-write
Local domain name .
     cySerialPortConf 1.3.6.1.4.1.2925.4.2.6
The PortSlave configuration - pslave.conf file. It configures the all serial ports.
         cySerialGlobal 1.3.6.1.4.1.2925.4.2.6.1
These parameters have the prefix conf. in the pslave.conf file
             cySerialInclude 1.3.6.1.4.1.2925.4.2.6.1.1 displaystring read-write
File used in centralized management.
             cySerialNFS 1.3.6.1.4.1.2925.4.2.6.1.2 displaystring read-write
Remote Network File System where data buffering will be written instead of the default directory '/var/run/DB'.
             cySerialLockDir 1.3.6.1.4.1.2925.4.2.6.1.3 displaystring read-write
The lock directory for the ACS.
             cySerialRlogin 1.3.6.1.4.1.2925.4.2.6.1.4 displaystring read-write
Location of the rlogin binary that accepts the -i flag.
             cySerialPppd 1.3.6.1.4.1.2925.4.2.6.1.5 displaystring read-write
Location of the pppd binary.
             cySerialTelnet 1.3.6.1.4.1.2925.4.2.6.1.6 displaystring read-write
Location of the telnet application
             cySerialSsh 1.3.6.1.4.1.2925.4.2.6.1.7 displaystring read-write
Location of the ssh application
             cySerialLocalLogins 1.3.6.1.4.1.2925.4.2.6.1.8 integer read-write
This parameter is only necessary when authentication is being performed for a port. This is useful if the Radius authentication server is down. Enumeration: 'on': 1, 'off': 0.
             cySerialFacility 1.3.6.1.4.1.2925.4.2.6.1.9 integer32 read-write
This value (0-7) is the Local facility sent to the syslog daemon.
             cySerialDBFacility 1.3.6.1.4.1.2925.4.2.6.1.10 integer32 read-write
This value (0-7) is the Local facility sent to the syslog daemon with the data when .
             cySerialGroupTable 1.3.6.1.4.1.2925.4.2.6.1.11 no-access
This associates group name and its users
                   cygroupEntry 1.3.6.1.4.1.2925.4.2.6.1.11.1 no-access
One particular association between group name and its users
                       cyGroupIndex 1.3.6.1.4.1.2925.4.2.6.1.11.1.1 interfaceindexorzero read-only
number to identifier the group
                       cyGroupName 1.3.6.1.4.1.2925.4.2.6.1.11.1.2 displaystring read-write
The Group Name
                       cyGroupUsers 1.3.6.1.4.1.2925.4.2.6.1.11.1.3 displaystring read-write
The users names
         cySerialSpec 1.3.6.1.4.1.2925.4.2.6.2
These parameters have the prefix all. or sxx. in the pslave.conf file
             cySerialPortTable 1.3.6.1.4.1.2925.4.2.6.2.1 no-access
This is the specific configuration to serial port
                 cysportEntry 1.3.6.1.4.1.2925.4.2.6.2.1.1 no-access
One particular serial port configuration
                     cySPortNumber 1.3.6.1.4.1.2925.4.2.6.2.1.1.1 interfaceindexorzero read-only
number to identifier the serial port. Value 0 is ALL.
                     cySPortTty 1.3.6.1.4.1.2925.4.2.6.2.1.1.2 displaystring read-write
The device name for the serial port.
                     cySPortName 1.3.6.1.4.1.2925.4.2.6.2.1.1.3 displaystring read-write
Alias name given to the server connected to the serial port.
                     cySPortSpeed 1.3.6.1.4.1.2925.4.2.6.2.1.1.4 integer read-write
The speed for serial port. Enumeration: 's134bps': 134, 's1200bps': 1200, 's600bps': 600, 's9600bps': 9600, 's57600bps': 57600, 's200bps': 200, 's300bps': 300, 's230400bps': 230400, 's38400bps': 38400, 's50bps': 50, 's19200bps': 19200, 's28800bps': 28800, 's14400bps': 14400, 's75bps': 75, 's115200bps': 115200, 's4800bps': 4800, 's2400bps': 2400, 's460800bps': 460800, 's1800bps': 1800, 's150bps': 150, 's110bps': 110.
                     cySPortDataSize 1.3.6.1.4.1.2925.4.2.6.2.1.1.5 integer32 read-write
The data size for serial port.
                     cySPortStopBits 1.3.6.1.4.1.2925.4.2.6.2.1.1.6 integer32 read-write
The number of stop bits for serial port.
                     cySPortParity 1.3.6.1.4.1.2925.4.2.6.2.1.1.7 displaystring read-write
The parity for serial port.
                     cySPortFlowCtrl 1.3.6.1.4.1.2925.4.2.6.2.1.1.8 displaystring read-write
The flow control for serial port.
                     cySPortDTRdelay 1.3.6.1.4.1.2925.4.2.6.2.1.1.9 integer32 read-write
This specifies how long (in miliseconds) a DTR signal will be turned off before it is turned on again.
                     cySPortDCDCtrl 1.3.6.1.4.1.2925.4.2.6.2.1.1.10 integer read-write
DCD signal controls the connection request. Enumeration: 'control': 1, 'notctrl': 0.
                     cySPortLogUtmp 1.3.6.1.4.1.2925.4.2.6.2.1.1.11 integer read-write
ACS update the login records in /var/run/utmp file. Enumeration: 'active': 1, 'inactive': 0.
                     cySPortLogWtmp 1.3.6.1.4.1.2925.4.2.6.2.1.1.12 integer read-write
ACS update the login records in /var/run/wtmp file. Enumeration: 'active': 1, 'inactive': 0.
                     cySPortLogform 1.3.6.1.4.1.2925.4.2.6.2.1.1.13 displaystring read-write
This is the format to write login record.
                     cySPortAuthtype 1.3.6.1.4.1.2925.4.2.6.2.1.1.14 displaystring read-write
Authentication type : .
                     cySPortAuthSrv1 1.3.6.1.4.1.2925.4.2.6.2.1.1.15 ipaddress read-write
IP address of the primary authentication server.
                     cySPortAccSrv1 1.3.6.1.4.1.2925.4.2.6.2.1.1.16 ipaddress read-write
IP address of the primary accounting server.
                     cySPortAuthTmo 1.3.6.1.4.1.2925.4.2.6.2.1.1.17 integer32 read-write
This is the timeout (in seconds) for authentication query to be answered.
                     cySPortAuthRetr 1.3.6.1.4.1.2925.4.2.6.2.1.1.18 integer32 read-write
This defines the number of times each server is tried before another is contacted.
                     cySPortAuthSrv2 1.3.6.1.4.1.2925.4.2.6.2.1.1.19 ipaddress read-write
IP address of the secondary authentication server.
                     cySPortAccSrv2 1.3.6.1.4.1.2925.4.2.6.2.1.1.20 ipaddress read-write
IP address of the secondary accounting server.
                     cySPortAuthSecret 1.3.6.1.4.1.2925.4.2.6.2.1.1.21 displaystring read-write
This is the shared secret with authentciation servers.
                     cySPortAuthRadP 1.3.6.1.4.1.2925.4.2.6.2.1.1.22 integer read-write
To accept Radius' user without password. Enumeration: 'active': 1, 'inactive': 0.
                     cySPortAuthAcc 1.3.6.1.4.1.2925.4.2.6.2.1.1.23 displaystring read-write
access restrition on Users.
                     cySPortProtocol 1.3.6.1.4.1.2925.4.2.6.2.1.1.24 displaystring read-write
Defines the port serial's protocol.
                     cySPortRemoteIP 1.3.6.1.4.1.2925.4.2.6.2.1.1.25 displaystring read-write
This is the default IP address of the serial port.
                     cySPortSocketPort 1.3.6.1.4.1.2925.4.2.6.2.1.1.26 displaystring read-write
This defines an alternative labeling system for the serial port.
                     cySPortRemHost 1.3.6.1.4.1.2925.4.2.6.2.1.1.27 ipaddress read-write
The IP address of the host to which the serial port will connect.
                     cySPortBanner 1.3.6.1.4.1.2925.4.2.6.2.1.1.28 displaystring read-write
This defines the banner.
                     cySPortPrompt 1.3.6.1.4.1.2925.4.2.6.2.1.1.29 displaystring read-write
This defines the login prompt to the serial port.
                     cySPortTermType 1.3.6.1.4.1.2925.4.2.6.2.1.1.30 displaystring read-write
This defines the terminal type.
                     cySPortAutomUsr 1.3.6.1.4.1.2925.4.2.6.2.1.1.31 displaystring read-write
This defines the automatic user.
                     cySPortNetMask 1.3.6.1.4.1.2925.4.2.6.2.1.1.32 ipaddress read-write
The network mask used in dial in connection.
                     cySPortPppMtu 1.3.6.1.4.1.2925.4.2.6.2.1.1.33 integer32 read-write
The PPP MTU - dial in connection.
                     cySPortPppMru 1.3.6.1.4.1.2925.4.2.6.2.1.1.34 integer32 read-write
The PPP MRU - dial in connection.
                     cySPortPppOptions 1.3.6.1.4.1.2925.4.2.6.2.1.1.35 displaystring read-write
The PPP options when ACS autodetects the PPP session .
                     cySPortPppFoption 1.3.6.1.4.1.2925.4.2.6.2.1.1.36 displaystring read-write
The PPP forced options when the user has already been authenticated.
                     cySPortModemChat 1.3.6.1.4.1.2925.4.2.6.2.1.1.37 displaystring read-write
The initchat send to modem connected.
                     cySPortSttyCmd 1.3.6.1.4.1.2925.4.2.6.2.1.1.38 displaystring read-write
the tty settings after socket connection is established.
                     cySPortSockTx 1.3.6.1.4.1.2925.4.2.6.2.1.1.39 integer32 read-write
Defines the delay (in miliseconds) before transmission to the Ethernet of data received through a serial port .
                     cySPortSockPoll 1.3.6.1.4.1.2925.4.2.6.2.1.1.40 integer32 read-write
Keep-alive timer (miliseconds) to the TCP connection .
                     cySPortSockIdle 1.3.6.1.4.1.2925.4.2.6.2.1.1.41 integer32 read-write
The idle timeout in seconds .
                     cySPortDBsize 1.3.6.1.4.1.2925.4.2.6.2.1.1.42 integer32 read-write
Maximum size of the data buffering file.
                     cySPortDBtime 1.3.6.1.4.1.2925.4.2.6.2.1.1.43 integer read-write
Timestamp in data buffering. Enumeration: 'active': 1, 'inactive': 0.
                     cySPortDBmode 1.3.6.1.4.1.2925.4.2.6.2.1.1.44 displaystring read-write
Data buffering mode : circ or line
                     cySPortDBsyslog 1.3.6.1.4.1.2925.4.2.6.2.1.1.45 integer32 read-write
size of the data buffering send to syslog.
                     cySPortDBmenu 1.3.6.1.4.1.2925.4.2.6.2.1.1.46 integer read-write
Menu of the data buffering. Enumeration: 'displayMen': 0, 'displayParc': 3, 'inactive': 1, 'displayDB': 2.
                     cySPortDBalarm 1.3.6.1.4.1.2925.4.2.6.2.1.1.47 integer read-write
Generating Alarms. Enumeration: 'active': 1, 'inactive': 0.
                     cySPortSSHbreak 1.3.6.1.4.1.2925.4.2.6.2.1.1.48 displaystring read-write
Break sequence - ssh session
                     cySPortSniffSess 1.3.6.1.4.1.2925.4.2.6.2.1.1.49 displaystring read-write
Sniff session type
                     cySPortSniffAdm 1.3.6.1.4.1.2925.4.2.6.2.1.1.50 displaystring read-write
List of admin users to sniff session
                     cySPortSniffEsc 1.3.6.1.4.1.2925.4.2.6.2.1.1.51 displaystring read-write
Escape sequence used in sniff session
                     cySPortSniffMsess 1.3.6.1.4.1.2925.4.2.6.2.1.1.52 displaystring read-write
Multiple sniff sessions
                     cySPortTelnetMode 1.3.6.1.4.1.2925.4.2.6.2.1.1.53 integer read-write
Mode negotiated by client telnet with the server Enumeration: 'text': 0, 'binary': 1.
                     cySPortSysBufSess 1.3.6.1.4.1.2925.4.2.6.2.1.1.54 integer read-write
Syslog Buffering at all times Enumeration: 'yes': 0, 'no': 1.
                     cySPortLFSuppress 1.3.6.1.4.1.2925.4.2.6.2.1.1.55 integer read-write
LF suppression in socket_server session Enumeration: 'active': 1, 'inactive': 0.
                     cySPortAutoInput 1.3.6.1.4.1.2925.4.2.6.2.1.1.56 displaystring read-write
This string is used to auto answer. It's the input string
                     cySPortAutoOutput 1.3.6.1.4.1.2925.4.2.6.2.1.1.57 displaystring read-write
This string is used to auto answer. It's the output string
                     cySPortPmType 1.3.6.1.4.1.2925.4.2.6.2.1.1.58 displaystring read-write
IPDU type, when the port protocol is configured as IPDU
                     cySPortPmUsers 1.3.6.1.4.1.2925.4.2.6.2.1.1.59 displaystring read-write
List of users which can access the IPDU and their respective outlets
                     cySPortPmOutlet 1.3.6.1.4.1.2925.4.2.6.2.1.1.60 displaystring read-write
List of . pairs, where the server is connected
                     cySPortPmKey 1.3.6.1.4.1.2925.4.2.6.2.1.1.61 displaystring read-write
Hotkey to grant access to the Power Management from a Telnet/SSH session
                     cySPortPmNOutlets 1.3.6.1.4.1.2925.4.2.6.2.1.1.62 integer32 read-write
Number of outlets of the IPDU
                     cySPortBreakInterval 1.3.6.1.4.1.2925.4.2.6.2.1.1.63 integer32 read-write
The break interval in miliseconds.