CTRON-SFPS-BASE-MIB: View SNMP OID List / Download MIB

VENDOR: ENTERASYS NETWORKS INC.


 Home MIB: CTRON-SFPS-BASE-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
   sfpsCPResourcesTable 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1 no-access
This table contains all Call Processors registered with the CPResources Table and is indexed by the Call Processor id.
       sfpsCPResourcesTableEntry 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1 no-access
Each entry contains information pertaining to a Call Processor.
           sfpsCPResourcesTableId 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.1 integer read-only
Call Processor id used to index into the table.
           sfpsCPResourcesTableName 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.2 displaystring read-only
The name of the associated Call Processor.
           sfpsCPResourcesTableOperStatus 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.3 integer read-only
Operational state of entry. Enumeration: 'kStatusRunning': 1, 'kStatusPending': 3, 'kStatusFaulted': 4, 'kStatusNotStarted': 5, 'kStatusHalted': 2.
           sfpsCPResourcesTableAdminStatus 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.4 integer read-only
This value represents the current administration status of the associated Call Processor. When enabled(3) the Call Processor is still allowed to call process packets. When this value is disabled(2) the call processor will not process any packets. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           sfpsCPResourcesTableStateTime 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.5 timeticks read-only
The last time that this Call Processor has changed states.
           sfpsCPResourcesTablePtsIn 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.6 integer read-only
The number of packets that have been sent to this Call Processor to be handled.
           sfpsCPResourcesTablePtsUsed 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.7 integer read-only
The number of packets that have been sent to this Call Processor and accepted for the purpose of processing.
           sfpsCPResourcesTablePolicyFlood 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.8 integer read-only
Number of packets flooded due to Policy.
           sfpsCPResourcesResolveFlood 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.9 integer read-only
Number of packets flooded due to not able to Resolve.
           sfpsCPResourcesConnectOK 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.10 integer read-only
Number of packets that caused a successful connect.
           sfpsCPResourcesDuplicate 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.11 integer read-only
Number of packets that were duplicates of an existing call.
           sfpsCPResourcesDiscoverOnly 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.12 integer read-only
Number of packets that the switch only discovered information.
           sfpsCPResourcesDiscoverError 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.13 integer read-only
Number of packets that the switch could not discover information. Something was wrong with the packet.
           sfpsCPResourcesResolveFail 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.14 integer read-only
Number of packets which caused the Resolve to fail. The fail is due to no vlan information was returned.
           sfpsCPResourcesResolveError 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.15 integer read-only
Number of packets which caused the Resolve to return an error. An error could be caused by a bad packet.
           sfpsCPResourcesPolicyFail 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.16 integer read-only
Number of packets which caused the Policy to fail. The fail is caused because the switch has no information on the vlan(s) returned by Resolve.
           sfpsCPResourcesPolicyError 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.17 integer read-only
Number of packets which caused the Policy to return an error. An error could be caused by a bad packet.
           sfpsCPResourcesConnectFail 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.18 integer read-only
Number of packets that caused the Connect to fail.
           sfpsCPResourcesConnectFlood 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.19 integer read-only
Number of packets that caused the Connect to flood.
           sfpsCPResourcesConnectError 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.20 integer read-only
Number of packets that caused the Connect to return an error.
           sfpsCPResourcesConfigTime 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.21 timeticks read-only
Number of time ticks since the last configuration change.
           sfpsCPResourcesNeedFlood 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.22 integer read-only
Set to enabled(1)/disabled(0) if the BaseNeedFlood attribute is desired. If disabled, then an attempt to resolve is performed.
           sfpsCPResourcesNeedResolve 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.23 integer read-only
Set to enabled(1)/disabled(0) if the Resoolve attribute is desired.
           sfpsCPResourcesNeedDiscover 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.24 integer read-only
Set to enabled(1)/disabled(0) if the Discover attribute is desired.
           sfpsCPResourcesDiscoverAll 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.25 integer read-only
Set to enabled(1)/disabled(0) if the DiscoverAll attribute is desired.
           sfpsCPResourcesNeedProxyOut 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.26 integer read-only
Set to enabled(1)/disabled(0) if the Proxy Forward attribute is desired.
           sfpsCPResourcesNeedProxyIn 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.27 integer read-only
Set to enabled(1)/disabled(0) if the Proxy Back attribute is desired.
           sfpsCPResourcesNeedFilter 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.28 integer read-only
Set to enabled(1)/disabled(0) if the Filter attribute is desired.
           sfpsCPResourcesAcceptRate 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.29 integer read-only
The number of packets per second that have been sent to this Call Processor to be handled and accepted for processing.
           sfpsCPResourcesTotalRate 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.30 integer read-only
The number of packets per second that have been sent to this Call Processor to be handled.
           sfpsCPResourcesSingleFlood 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.34 integer read-only
Number of packets that were unicast (single) flooded.
           sfpsCPResourcesNeedValidNet 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.35 integer read-only
Number of packets that were unicast (single) flooded.
           sfpsCPResourcesInvalidNetDrops 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.36 integer read-only
           sfpsCPResourcesPersistMask 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.37 integer read-only
   sfpsCPResourcesAPI 1.3.6.1.4.1.52.4.2.4.2.2.2.3.2
       sfpsCPResourcesAPIID 1.3.6.1.4.1.52.4.2.4.2.2.2.3.2.1 integer read-write
Identifier for the call processor.
       sfpsCPResourcesAPIAdminStatus 1.3.6.1.4.1.52.4.2.4.2.2.2.3.2.2 integer read-write
Administrative status of the call processor. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
       sfpsCPResourcesAPIAttribute 1.3.6.1.4.1.52.4.2.4.2.2.2.3.2.3 integer read-write
Call processor attribute/features. Enumeration: 'noDiscoverAll': 8, 'none': 1, 'resolve': 5, 'proxyOut': 13, 'proxyIn': 11, 'noProxyIn': 10, 'validNet': 17, 'noProxyOut': 12, 'discover': 7, 'noFlood': 2, 'flood': 3, 'discoverAll': 9, 'noResolve': 4, 'nofilter': 14, 'filter': 15, 'noDiscover': 6, 'noValidateNet': 16.
       sfpsCPResourcesAPIScope 1.3.6.1.4.1.52.4.2.4.2.2.2.3.2.4 integer read-write
Scope this attribute to switch or port. Enumeration: 'switch': 1, 'port': 2.
       sfpsCPResourcesAPIPersistance 1.3.6.1.4.1.52.4.2.4.2.2.2.3.2.5 integer read-write
Parameter to make persistent on switch reset. Enumeration: 'persistOther': 1, 'persistEnabled': 3, 'persistDisabled': 2.
       sfpsCPResourcesAPIVerb 1.3.6.1.4.1.52.4.2.4.2.2.2.3.2.6 integer read-write
Action to perform. Enumeration: 'other': 1, 'set': 2.
   sfpsServiceCenterFacilityTable 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9 no-access
This table gives facility semantics to call processing.
       sfpsServiceCenterFacilityEntry 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1 no-access
Each entry contains the configuration of the Facility Entry.
           sfpsServiceCenterFacilityHashLeaf 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.1 hexinteger read-only
Server hash, part of instance key.
           sfpsServiceCenterFacilityMetric 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.2 integer read-only
Defines order servers are called low to high.
           sfpsServiceCenterFacilityName 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.3 displaystring read-only
Server name.
           sfpsServiceCenterFacilityOperStatus 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.4 integer read-only
Operational state of entry. Enumeration: 'kStatusRunning': 1, 'kStatusPending': 3, 'kStatusFaulted': 4, 'kStatusNotStarted': 5, 'kStatusHalted': 2.
           sfpsServiceCenterFacilityAdminStatus 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.5 integer read-write
Administrative State of Entry. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
           sfpsServiceCenterFacilityStatusTime 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.6 timeticks read-only
Time Tick of last operStatus change.
           sfpsServiceCenterFacilityRequests 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.7 integer read-only
Requests made to server.
           sfpsServiceCenterFacilityReply 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.8 integer read-only
GOOD replies by server.
   sfpsCSPControlTable 1.3.6.1.4.1.52.4.2.4.2.2.2.5.1 no-access
Cabletron Switch Protocol Control statistics
       sfpsCSPControlTableEntry 1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1 no-access
           sfpsCSPControlTableIndex 1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.1 integer read-only
           sfpsCSPControlTableCSPType 1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.2 integer read-only
           sfpsCSPControlTableCSPName 1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.3 displaystring read-only
           sfpsCSPControlTableAdminStatus 1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.4 integer read-write
Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
           sfpsCSPControlTableSwitchToCallProc 1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.5 integer read-only
Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
           sfpsCSPControlTablePktsProcessed 1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.6 integer read-only
           sfpsCSPControlTablePktRate 1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.7 integer read-only
     sfpsBlockSourceTable 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1 no-access
The SourceBlocker table lists all nodes (MAC addresses) that have been heard locally on the switch. Only a certain subset (if any) of the nodes in this table are blocked.
         sfpsBlockSourceEntry 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1 no-access
Entry in the SourceBlocker table indexed by a counter.
             sfpsBlockSourceIndex 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.1 integer read-only
The index into the table
             sfpsBlockSourceMAC 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.2 sfpsaddress read-only
The MAC address of the node.
             sfpsBlockSourceElapTimeShort 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.3 timeticks read-only
The elapsed time (seconds) in the current short-threshold period.
             sfpsBlockSourceNumCallsShort 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.4 integer read-only
The number of packets seen from the node during the elapsed time for the short-threshold.
             sfpsBlockSourceElapTimeLong 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.5 timeticks read-only
The elapsed time (seconds) in the current long-threshold period.
             sfpsBlockSourceNumCallLong 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.6 integer read-only
The number of packets seen from the node during the elapsed time for the long-threshold.
             sfpsBlockSourceBlockFlag 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.7 integer read-only
Describes whether the node is blocked or not. There are three possible integer values for this field: 0-notBlocked, 1-Blocked, 2-WouldBeBlocked. The WouldBeBlocked value is used to represent a node that would be in the blocked state if the SourceBlocker was enabled. A node can get into this state only if the blocker is disabled. If the blocker is enabled at this point, the node will be blocked, and a connection filter will be put in place when the next packet is received from this node. Enumeration: 'wouldBeBlocked': 2, 'blocked': 1.
             sfpsBlockSourceUnBlockableFlag 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.8 integer read-only
Flags a node as either Blockable(0) or Unblockable(1). When a node is unblockable, it will never be blocked regardless of the number of packets it sends. The default setting is blockable. Any node can be changed to unblockable via the Source Blocker API (SBAPI). Enumeration: 'unblockable': 1.
             sfpsBlockSourceFilterPresent 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.9 integer read-only
Flags whether or not a connection filter is in place for the given node. (This attribute cannot be changed on its own and is therefore used only for diagnostic purposes. It is used internally so that only one filter connection will be mapped per node.)
             sfpsBlockSourceNext 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.10 integer read-only
If this node entry (instance) is part of a hash chain, the NEXT leaf will contain the index to the next node entry in the chain. Otherwise, it will contain -1.
             sfpsBlockSourceBlocksOnlyIndex 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.11 integer read-only
Contains the index into the BlockSourceOnly table or the UnblockableOnly table depending on the entry flags. If the 'blocked flag' is set, this value represents the index into the BlockSourceOnly table. If the 'unblockable' flag is set, this value represents the index into the UnblockableOnly table. Otherwise, this value is set to -1 (representing that it is not used.)
     sfpsBlockSourceOnlyTable 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1 no-access
The format of the BlockSourceOnly Table is exactly the same as the SourceBlocker Table. The only difference is that the entries in this table are only a subset of the entries in the SourceBlocker Table. Only the entries that have a BLOCKFLAG set to 'blocked' or 'would-be-blocked' will reside in this table.
         sfpsBlockSourceOnlyEntry 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1 no-access
Entry in the BlockSourceOnly table indexed by a counter.
             sfpsBlockSourceOnlyIndex 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.1 integer read-only
The index into the table
             sfpsBlockSourceOnlyMAC 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.2 sfpsaddress read-only
The MAC address of the node.
             sfpsBlockSourceOnlyElapTimeShort 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.3 timeticks read-only
The elapsed time (seconds) in the current short-threshold period.
             sfpsBlockSourceOnlyNumCallsShort 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.4 integer read-only
The number of packets seen from the node during the elapsed time for the short-threshold.
             sfpsBlockSourceOnlyElapTimeLong 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.5 timeticks read-only
The elapsed time (seconds) in the current long-threshold period.
             sfpsBlockSourceOnlyNumCallLong 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.6 integer read-only
The number of packets seen from the node during the elapsed time for the long-threshold.
             sfpsBlockSourceOnlyBlockFlag 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.7 integer read-only
Describes whether the node is blocked or not. There are three possible integer values for this field: 0-notBlocked, 1-Blocked, 2-WouldBeBlocked. The WouldBeBlocked value is used to represent a node that would be in the blocked state if the SourceBlocker was enabled. A node can get into this state only if the blocker is disabled. If the blocker is enabled at this point, the node will be blocked, and a connection filter will be put in place when the next packet is received from this node. Enumeration: 'wouldBeBlocked': 2, 'blocked': 1.
             sfpsBlockSourceOnlyUnBlockableFlag 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.8 integer read-only
Flags a node as either Blockable(0) or Unblockable(1). When a node is unblockable, it will never be blocked regardless of the number of packets it sends. The default setting is blockable. Any node can be changed to unblockable via the Source Blocker API (SBAPI). Enumeration: 'unblockable': 1.
             sfpsBlockSourceOnlyFilterPresent 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.9 integer read-only
Flags whether or not a connection filter is in place for the given node. (This attribute cannot be changed on its own and is therefore used only for diagnostic purposes. It is used internally so that only one filter connection will be mapped per node.)
             sfpsBlockSourceOnlyNext 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.10 integer read-only
If this node entry (instance) is part of a hash chain, the NEXT leaf will contain the index to the next node entry in the chain. Otherwise, it will contain -1.
             sfpsBlockSourceOnlyBlocksOnlyIndex 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.11 integer read-only
Contains the index into the BlockSourceOnly table or the UnblockableOnly table depending on the entry flags. If the 'blocked' flag is set, this value represents the index into the BlockSourceOnly table. If the 'unblockable' flag is set, this value represents the index into the UnblockableOnly table. Otherwise, this value is set to -1 (representing that it is not used.)
     sfpsBlockSourcePortTable 1.3.6.1.4.1.52.4.2.4.2.2.14.3.1 no-access
The SourceBlock API allows for administratively selecting a port and flagging it as 'unblockable'. The BlockSourcePort table shows which ports are set to 'unblockable' and which ones remain set to the default 'blockable' setting.
         sfpsBlockSourcePortEntry 1.3.6.1.4.1.52.4.2.4.2.2.14.3.1.1 no-access
Entry into the BlockSourcePort Table
             sfpsBlockSourcePortPort 1.3.6.1.4.1.52.4.2.4.2.2.14.3.1.1.1 integer read-only
This is the instance part of the table. There will be as many instances as there are logical ports in the device. The attributes represented in subsequent leaves all pertain to this port instance.
             sfpsBlockSourcePortBlockability 1.3.6.1.4.1.52.4.2.4.2.2.14.3.1.1.2 integer read-only
This leaf contains either 0-blockable or 1-unblockable, depending on whether nodes on this port are allowed to be blocked or not. Enumeration: 'unblockable': 1.
     sfpsBlockSourceAPIVerb 1.3.6.1.4.1.52.4.2.4.2.2.14.4.1 integer read-write
Other -- N/A Disable -- disable the source blocker (nodes that are currently blocked will remain blocked, but no additional nodes will be blocked) Enable -- enable the source blocker (allow it to start blocking nodes) ClearAll -- clear the entire block table (this does not remove any connection filters, and should only be used as a diagnostic tool.) BlockMac -- administratively block a node (The node's MAC address must be previously set in the MAC leaf.) UnblockMac -- administratively unblock a node (The node's MAC address must be previously set in the MAC leaf.) SetMacUnblockable -- administratively mark a node as 'unblockable' so that it cannot be blocked. (The node's MAC must be previously set in the MAC leaf.) If the relevant node is blocked at the time the SetMacUnblockable command is issued, the node will automatically be 'unblocked' first. SetMacBlockable -- administratively mark a node as 'blockable' so that it can be blocked. (The node's MAC must be previously set in the MAC leaf.) SetPortUnblockable -- administratively mark a port as 'unblockable' so that any nodes on that port cannot be blocked. (The port number must be previously set in the Port leaf.) SetPortBlockable -- administratively mark a port as 'blockable' so that all nodes on that port can be blocked. (The port number must be previously set in the Port leaf.) SetReapUserCnx -- administratively mark a port as 'blocked' so that administratively mark a port as 'blockable' so that.) Enumeration: 'setPortUnblockable': 13, 'setPortBlockable': 14, 'setMacBlockable': 12, 'switchToBlocking': 3, 'setShortThreshold': 4, 'setLongPeriod': 7, 'setLongThreshold': 6, 'blockMac': 9, 'setMacUnblockable': 11, 'setReapUserCnx': 15, 'switchToLearning': 2, 'unblockMac': 10, 'clearAll': 8, 'other': 1, 'setShortPeriod': 5.
     sfpsBlockSourceAPIInputValue 1.3.6.1.4.1.52.4.2.4.2.2.14.4.2 integer read-write
Set the input value to enter
     sfpsBlockSourceAPIPort 1.3.6.1.4.1.52.4.2.4.2.2.14.4.3 integer read-write
Read/Write leaf used in conjunction with SetPortUnblockable and SetPortBlockable. (values of 1 through numLogicalPorts are valid.
     sfpsBlockSourceAPIMAC 1.3.6.1.4.1.52.4.2.4.2.2.14.4.4 sfpsaddress read-write
Leaf used to set the MAC address that will be operated on with one of the above verbs.
     sfpsBlockSourceAPIBlockStatus 1.3.6.1.4.1.52.4.2.4.2.2.14.4.5 integer read-write
Status of the blocker object (enabled/disabled.) Additional nodes will be blocked only when this status leaf is in the 'enabled' state. Enumeration: 'other': 1, 'blocking': 3, 'learning': 2.
     sfpsBlockSourceAPIShortThreshold 1.3.6.1.4.1.52.4.2.4.2.2.14.4.6 integer read-write
The number of packets per a SHORTPERIOD that will result in a node being blocked. This can be changed by writing directly to this leaf. The only limit imposed on this value is that it has to be positive (greater than zero.) There is no upper bound except for what is implied by the size of an integer.
     sfpsBlockSourceAPIShortPeriod 1.3.6.1.4.1.52.4.2.4.2.2.14.4.7 integer read-write
The sample period to use for determining if any given node has exceeded the SHORTTHRESHOLD. See SHORTTHRESHOLD for bounds checking for this value
     sfpsBlockSourceAPILongThreshold 1.3.6.1.4.1.52.4.2.4.2.2.14.4.8 integer read-write
The number of packets per a LONGPERIOD that will result in a node being blocked. See SHORTTHRESHOLD for bounds checking for this value.
     sfpsBlockSourceAPILongPeriod 1.3.6.1.4.1.52.4.2.4.2.2.14.4.9 integer read-write
The sample period to use for determining if any given node has exceeded the LONGTHRESHOLD. See SHORTTHRESHOLD for bounds checking for this value.
     sfpsBlockSourceAPIReapUserCnxs 1.3.6.1.4.1.52.4.2.4.2.2.14.4.10 integer read-write
The sample period to use for determining if any given node has exceeded the LONGTHRESHOLD. See SHORTTHRESHOLD for bounds checking for this value.
     sfpsBlockSourceExcludeTable 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1 no-access
The format of the UnblockableOnly Table is exactly the same as the SourceBlocker Table. The only difference is that the entries in this table are only a subset of the entries in the SourceBlocker Table. Only the entries that have an UNBLOCKABLEFLAG set to 'unblockable' will show up in this table.
         sfpsBlockSourceExcludeEntry 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1 no-access
Entry in the BlockSourceOnly table indexed by a counter.
             sfpsBlockSourceExcludeIndex 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.1 integer read-only
The index into the table
             sfpsBlockSourceExcludeMAC 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.2 sfpsaddress read-only
The MAC address of the node.
             sfpsBlockSourceExcludeElapTimeShort 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.3 timeticks read-only
The elapsed time (seconds) in the current short-threshold period.
             sfpsBlockSourceExcludeNumCallsShort 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.4 integer read-only
The number of packets seen from the node during the elapsed time for the short-threshold
             sfpsBlockSourceExcludeElapTimeLong 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.5 timeticks read-only
The elapsed time (seconds) in the current long-threshold period
             sfpsBlockSourceExcludeNumCallLong 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.6 integer read-only
The number of packets seen from the node during the elapsed time for the long-threshold.
             sfpsBlockSourceExcludeBlockFlag 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.7 integer read-only
Describes whether the node is blocked or not. There are three possible integer values for this field: 0-notBlocked, 1-Blocked, 2-WouldBeBlocked. The WouldBeBlocked value is used to represent a node that would be in the blocked state if the SourceBlocker was enabled. A node can get into this state only if the blocker is disabled. If the blocker is enabled at this point, the node will be blocked, and a connection filter will be put in place when the next packet is received from this node Enumeration: 'wouldBeBlocked': 2, 'blocked': 1.
             sfpsBlockSourceExcludeUnBlockableFlag 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.8 integer read-only
Flags a node as either Blockable(0) or Unblockable(1). When a node is unblockable, it will never be blocked regardless of the number of packets it sends. The default setting is blockable. Any node can be changed to unblockable via the Source Blocker API (SBAPI). Enumeration: 'unblockable': 1.
             sfpsBlockSourceExcludeFilterPresent 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.9 integer read-only
Flags whether or not a connection filter is in place for the given node. (This attribute cannot be changed on its own and is therefore used only for diagnostic purposes. It is used internally so that only one filter connection will be mapped per node.)
             sfpsBlockSourceExcludeNext 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.10 integer read-only
If this node entry (instance) is part of a hash chain, the NEXT leaf will contain the index to the next node entry in the chain. Otherwise, it will contain -1
             sfpsBlockSourceExcludeBlockSourceOnlyIndex 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.11 integer read-only
Contains the index into the BlockSourceOnly table or the UnblockableOnly table depending on the entry flags. If the 'blocked' flag is set, this value represents the index into the BlockSourceOnly table. If the 'unblockable' flag is set, this value represents the index into the UnblockableOnly table. Otherwise, this value is set to -1 (representing that it is not used
     sfpsBlockSourceStatsNumBlocks 1.3.6.1.4.1.52.4.2.4.2.2.14.6.1 integer read-only
     sfpsBlockSourceStatsNumCollisions 1.3.6.1.4.1.52.4.2.4.2.2.14.6.2 integer read-only
The number of hash collisions resulting in a chain of nodes. (diagnostic only.)
     sfpsBlockSourceStatsLongestChain 1.3.6.1.4.1.52.4.2.4.2.2.14.6.3 integer read-only
The maximum number of nodes in a linked list chain (including the hash bucket itself) due to hashing collisions. (diagnostic only.)
     sfpsBlockSourceStatsNumEntries 1.3.6.1.4.1.52.4.2.4.2.2.14.6.4 integer read-only
The number of entries in the SourceBlocker table. (Each new node that is heard has its own entry.
     sfpsBlockSourceStatsMaxNumEntries 1.3.6.1.4.1.52.4.2.4.2.2.14.6.5 integer read-only
The maximum number of entries that can fit in the SourceBlocker Table. (This currently mirrors the size of the Directory's NodeTable.)
     sfpsBlockSourceStatsSizeOfObj 1.3.6.1.4.1.52.4.2.4.2.2.14.6.6 integer read-only
The size of the SourceBlocker object itself (in bytes.)
     sfpsBlockSourceStatsHashModValue 1.3.6.1.4.1.52.4.2.4.2.2.14.6.7 integer read-only
The value that is used for the modulus operation in the hashing algorythm.
     sfpsBlockSourceStatsHashSlotsSize 1.3.6.1.4.1.52.4.2.4.2.2.14.6.8 integer read-only
The amount of storage used for the hash buckets (in bytes.)
     sfpsBlockSourceStatsTableSize 1.3.6.1.4.1.52.4.2.4.2.2.14.6.9 integer read-only
The amount of storage used for the SourceBlocker Table (in bytes.)
     sfpsBlockSourceStatsBlockSourceOnlySize 1.3.6.1.4.1.52.4.2.4.2.2.14.6.10 integer read-only
The amount of storage used for the Blocks-Only index array (in bytes.)
     sfpsBlockSourceStatsUnblockableSize 1.3.6.1.4.1.52.4.2.4.2.2.14.6.11 integer read-only
The amount of storage used for the Unblockable-Only index array (in bytes.)
     sfpsBlockSourceStatsPortMaskSize 1.3.6.1.4.1.52.4.2.4.2.2.14.6.12 integer read-only
The amount of storage used for the port mask object (in bytes.)
     sfpsBlockSourceStatsTotalHeapBytes 1.3.6.1.4.1.52.4.2.4.2.2.14.6.13 integer read-only
The total amount of heap memory used for all data storage (above) including the SourceBlocker object itself (in bytes.)
 sfpsDHCPServerVLANName 1.3.6.1.4.1.52.4.2.4.2.2.15.1 octet string read-write
 sfpsDHCPServerVLANSingleFloodStatus 1.3.6.1.4.1.52.4.2.4.2.2.15.2 integer read-write
Enumeration: 'on': 1, 'off': 2.
 sfpsDHCPServerVLANVersion 1.3.6.1.4.1.52.4.2.4.2.2.15.3 integer read-only
 sfpsATalkAMRVLANControlName 1.3.6.1.4.1.52.4.2.4.2.2.16.1 octet string read-write
 sfpsATalkAMRVLANControlVersion 1.3.6.1.4.1.52.4.2.4.2.2.16.2 integer read-only