CTRON-IP-ROUTER-MIB: View SNMP OID List / Download MIB

VENDOR: ENTERASYS NETWORKS INC.


 Home MIB: CTRON-IP-ROUTER-MIB
Download as:   
ROUTER-OIDS, SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 nwIpRouter 1.3.6.1.4.1.52.4.2.2.2.3.1
     nwIpMibs 1.3.6.1.4.1.52.4.2.2.2.3.1.1
         nwIpMibRevText 1.3.6.1.4.1.52.4.2.2.2.3.1.1.1 displaystring read-only
Indicates the current revision level of the IP MIB in textual format.
     nwIpComponents 1.3.6.1.4.1.52.4.2.2.2.3.1.2
         nwIpSystem 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1
             nwIpSysConfig 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1.1
                 nwIpSysRouterId 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1.1.1 ipaddress read-write
The IP Address used to uniquely identify the host (device) running IP Routing Services. The value of nwIpSysRouterId is equal to the highest IP Address in the IP Address Table.
             nwIpSysAdministration 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1.2
                 nwIpSysAdminStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1.2.1 integer read-write
Sets the administrative state of IP Routing Services system-wide. Enabled(3) causes IP Routing Services to become active on all router ports configured and enabled for IP Routing Services. Disabled(2) causes IP Routing Services to become inactive system-wide. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 nwIpSysOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1.2.2 integer read-only
Indicates the operating condition of IP Routing Services, system-wide. The value of nwIpSysOperStatus indicates any problem with your IP Routing Services configuration. A value of 6 indicates that regardless of the value of nwIpSysAdminStatus,IP Routing Services is not operating because of an invalid configuration. Enumeration: 'pending-disable': 4, 'invalid-config': 6, 'enabled': 3, 'disabled': 2, 'other': 1, 'pending-enable': 5.
                 nwIpSysAdminReset 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1.2.3 integer read-write
Resets IP Routing Services, system-wide. Reset (2) forces a restart of IP Routing Services without a graceful shutdown on any active router ports, without affecting any other routing services. Enumeration: 'reset': 2, 'other': 1.
                 nwIpSysOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1.2.4 timeticks read-only
Indicates the elapsed time, in hundredths of a second, that nwIpSysOperStatus has been in its current administrative state.
                 nwIpSysVersion 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1.2.5 displaystring read-only
Indicates the current revision level of the IP Routing Services firmware, in textual format.
         nwIpForwarding 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2
             nwIpFwdSystem 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1
                 nwIpFwdCounters 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1
                     nwIpFwdCtrAdminStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.1 integer read-write
Sets the administrative state of the aggregate (system-wide) IP packet and byte counters. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to become inactive. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                     nwIpFwdCtrReset 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.2 integer read-write
Resets the aggregate (system-wide) IP packet and byte counters. Reset (2) resets the IP aggregate counters to 0. nwIpFwdCtrOperationalTime is also reset to 0. Enumeration: 'reset': 2, 'other': 1.
                     nwIpFwdCtrOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.3 timeticks read-only
Indicates the elapsed time, in hundredths of a second, that nwIpFwdCtrAdminStatus has been in the current state.
                     nwIpFwdCtrInPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.4 counter read-only
Indicates the total number of IP packets that have been received, system-wide, during nwIpFwdCtrOperationalTime.
                     nwIpFwdCtrOutPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.5 counter read-only
Indicates the total number of IP packets that have been transmitted, system-wide, during nwIpFwdCtrOperationalTime.
                     nwIpFwdCtrFwdPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.6 counter read-only
Indicates the total number of IP packets that have been forwarded, system-wide, during nwIpFwdCtrOperationalTime.
                     nwIpFwdCtrFilteredPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.7 counter read-only
Indicates the total number of IP packets that have been administratively filtered, system-wide, during nwIpFwdCtrOperationalTime.
                     nwIpFwdCtrDiscardPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.8 counter read-only
Indicates the total number of IP packets that have been discarded, system-wide, during nwIpFwdCtrOperationalTime.
                     nwIpFwdCtrAddrErrPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.9 counter read-only
Indicates the total number of IP packets that have been discarded, system-wide, during nwIpFwdCtrOperationalTime, because of addressing errors in the IP header.
                     nwIpFwdCtrLenErrPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.10 counter read-only
Indicates the total number of IP packets that have been discarded, system-wide, during nwIpFwdCtrOperationalTime, because an invalid packet length is contained in the IP header.
                     nwIpFwdCtrHdrErrPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.11 counter read-only
Indicates the total number of IP packets that have been discarded, system-wide, during nwIpFwdCtrOperationalTime, because of an invalid IP header.
                     nwIpFwdCtrInBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.12 counter read-only
Indicates the total number of bytes in the IP packets that have been received, system-wide, during nwIpFwdCtrOperationalTime.
                     nwIpFwdCtrOutBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.13 counter read-only
Indicates the total number of bytes in the IP packets that have been transmitted, system-wide, during nwIpFwdOperationalTime.
                     nwIpFwdCtrFwdBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.14 counter read-only
Indicates the total number of bytes in the IP packets that have been forwarded, system-wide, during nwIpFwdCtrOperationalTime.
                     nwIpFwdCtrFilteredBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.15 counter read-only
Indicates the total number of bytes in the IP packets that have been administratively filtered, system-wide, during nwIpFwdCtrOperationalTime.
                     nwIpFwdCtrDiscardBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.16 counter read-only
Indicates the total number of bytes in the IP packets that have been discarded, system-wide, during nwIpFwdCtrOperationalTime.
                     nwIpFwdCtrHostInPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.17 counter read-only
Indicates the total number of IP packets that have been successfully delivered to the local host, during nwIpFwdCtrOperationalTime.
                     nwIpFwdCtrHostOutPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.18 counter read-only
Indicates the total number of IP packets that have been forwarded by the local host, during nwIpFwdCtrOperationalTime.
                     nwIpFwdCtrHostDiscardPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.19 counter read-only
Indicates the total number of IP packets that have been discarded by the local host, during nwIpFwdCtrOperationalTime.
                     nwIpFwdCtrHostInBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.20 counter read-only
Indicates the total number of IP packets that have been received by the local host, during nwIpFwdCtrOperationalTime.
                     nwIpFwdCtrHostOutBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.21 counter read-only
Indicates the total number of IP packets that have been transmitted by the local host, during nwIpFwdCtrOperationalTime.
                     nwIpFwdCtrHostDiscardBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.22 counter read-only
Indicates the total number of bytes in the IP packets that have been discarded by the local host, during nwIpFwdCtrOperationalTime, due to a lack of host resources.
             nwIpFwdInterfaces 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2
                 nwIpFwdIfConfig 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1
                     nwIpFwdIfTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1 no-access
This table contains an entry for each router port. This table is indexed by nwIpFwdIfIndex, which indicates the value of MIB 2 ifindex which identifies the router port for which each entry exists.
                         nwIpFwdIfEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1 no-access
Each entry specifies the IP Routing Services configuration for the router port for which the entry exists.
                             nwIpFwdIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.1 integer read-only
Indicates the value of MIB 2 ifindex, which identifies the router port.
                             nwIpFwdIfAdminStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.2 integer read-write
Sets the administrative state of IP Routing Services on the router port for which the entry exists. Enabled (3) causes IP Routing Services to become active. Disabled (2) causes it to become inactive. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                             nwIpFwdIfOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.3 integer read-only
Indicates the current operating condition of IP Routing Services on the router port for which the entry exists. The value of nwIpFwdIfOperStatus indicates any problem with the configuration of IP routing Services on the router port. A value of 6 indicates that regardless of the value of nwIpFwdIfAdminStatus, IP Routing Services is not operating because of an invalid port-level configuration. Enumeration: 'pending-disable': 4, 'invalid-config': 6, 'enabled': 3, 'disabled': 2, 'other': 1, 'pending-enable': 5.
                             nwIpFwdIfOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.4 timeticks read-only
Indicates the elapsed time, in hundredths of a second, that nwIpFwdIfOperStatus has been in its current state.
                             nwIpFwdIfControl 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.5 integer read-write
This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting this object has no effect. Enumeration: 'add': 2, 'other': 1, 'delete': 3.
                             nwIpFwdIfMtu 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.6 integer read-write
Specifies the Maximum Transmission Unit (MTU) for IP packets on the router port for which the entry exists. This includes the IP header and data, but does not include framing.
                             nwIpFwdIfForwarding 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.7 integer read-write
Controls forwarding of IP packets on the router port for which the entry exists. Enabled (3) causes IP packets to be forwarded. Disabled (2) prevents IP packets from being forwarded. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                             nwIpFwdIfFrameType 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.8 integer read-write
Specifies the framing type for IP packets forwarded on the router port for which the entry exists. Enumeration: 'encapenetsnap': 11, 'encaptrsnap': 14, 'localtalk': 7, 'nativewan': 8, 'other': 1, 'encapfddisnap': 16, 'slip': 5, 'snap': 3, 'ethernet': 2, 'encapenet': 9, 'canonical': 17.
                             nwIpFwdIfAclIdentifier 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.9 integer read-write
Specifies the Access Control ID of the access control list in effect for the IP packets being routed on the router port for which the entry exists. A value of 0 indicates that no access control list is in effect.
                             nwIpFwdIfAclStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.10 integer read-write
Controls the operation of any access control list configured for IP traffic for the IP packets being routed on the router port for which the entry exists. Enabled (3) applies the access control list, indicated by nwIpFwdIfAclIdentifier to all IP traffic being routed on the port. Disabled (2) prevents the access control list from being applied. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                             nwIpFwdIfCacheControl 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.11 integer read-write
Controls IP Address caching on the router port for which the entry exists. IP Address caching speeds-up the switching process. When IP Addresses caching is enabled, IP Addresses used for address validation, filtering, and forwarding are stored in the cache. This cache is checked first before doing a full route table lookup, which speeds up the switching process. Enabled (3) turns on IP Address caching. Disabled (2 turns it off. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
                             nwIpFwdIfCacheEntries 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.12 counter read-only
Indicates the number of entries in the IP Address cache on the router port for which the entry exists.
                             nwIpFwdIfCacheHits 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.13 counter read-only
Indicates the number of times entries in the IP Address Cache have been used to provide the IP Address required to validate, filter, or forward an IP packet on the router port.
                             nwIpFwdIfCacheMisses 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.14 counter read-only
Indicates the number of times the IP Address required to validate, filter, or forward an IP packet on the router port was not found in the IP Address cache.
                     nwIpAddressTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2 no-access
This table contains an entry for each IP Address assigned to each router port.
                         nwIpAddrEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1 no-access
Each entry specifies the IP addressing information for the logical IP network for which the entry exists.
                             nwIpAddrIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.1 integer read-write
Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.
                             nwIpAddrIfAddress 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.2 ipaddress read-write
This is the IP Address assigned to the logical IP network for which the entry exist. As multiple IP Addresses may be assigned to a single router port, all addresses assigned to the port must be of the same subnet.
                             nwIpAddrIfControl 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.3 integer read-write
Set this object to add or delete this entry from the table. Enumeration: 'add': 2, 'other': 1, 'delete': 3.
                             nwIpAddrIfAddrType 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.4 integer read-write
Specifies whether the IP address, nwIpAddrIfAddress, is the primary, workgroup or secondary IP address for the IP router port for which the entry exists. A primary or workgroup address must be specified before a router port can be enabled. Enumeration: 'workgroup': 4, 'other': 1, 'primary': 2, 'secondary': 3.
                             nwIpAddrIfMask 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.5 ipaddress read-write
Specifies the Subnet Mask for the logical IP network for which the entry exists.
                             nwIpAddrIfBcastAddr 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.6 integer read-write
Specifies the IP broadcast address type for the logical IP network for which the entry exists. A router port may be configured to send IP broadcasts using the all-ones-based format or the all-zeros-based format. nwIpAddrIfBcastAddr determines the value of the broadcast portion of the IP broadcast address being used to address broadcast packets. Enumeration: 'ones': 3, 'other': 1, 'zeros': 2.
                 nwIpFwdIfCounters 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2
                     nwIpFwdIfCtrTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1 no-access
This table contains an entry for each router port configured and enabled for IP Routing Services.
                         nwIpFwdIfCtrEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1 no-access
Each entry indicates the packet and byte count of IP packets on the router port for which the entry exists.
                             nwIpFwdIfCtrIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.1 integer read-only
Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.
                             nwIpFwdIfCtrAdminStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.2 integer read-write
Sets the administrative state of the per-port IP packet and byte counters on the router port for which the entry exists. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to become inactive. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                             nwIpFwdIfCtrReset 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.3 integer read-write
Resets the per-port IP packet and byte counters on the router port for which the entry exists. Reset (2) resets the counters to 0. nwIpFwdIfCtrOperationalTime is also reset to 0. Enumeration: 'reset': 2, 'other': 1.
                             nwIpFwdIfCtrOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.4 timeticks read-only
Indicates the elapsed time, in hundredths of a second, that the per-port IP packet and byte counters have been active on the router port for which the entry exists.
                             nwIpFwdIfCtrInPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.5 counter read-only
Indicates the total number of IP packets that have been received, during nwIpFwdIfCtrOperationaltime, on the router port for which the entry exists.
                             nwIpFwdIfCtrOutPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.6 counter read-only
Indicates the total number of IP packets that have been transmitted, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.
                             nwIpFwdIfCtrFwdPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.7 counter read-only
Indicates the total number of IP packets that have been forwarded during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.
                             nwIpFwdIfCtrFilteredPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.8 counter read-only
Indicates the total number of IP packets that have been administratively filtered, during nwIpFwdIfCtrOperationalTime, on the IP router port for which this entry exists.
                             nwIpFwdIfCtrDiscardPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.9 counter read-only
Indicates the total number of IP packets that have been discarded (dropped), during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.
                             nwIpFwdIfCtrAddrErrPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.10 counter read-only
Indicates the total number of IP packets that have been discarded, because of addressing errors in the IP header, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.
                             nwIpFwdIfCtrLenErrPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.11 counter read-only
Indicates the total number of IP packets that have been discarded, because an invalid packet length was contained in the IP header, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.
                             nwIpFwdIfCtrHdrErrPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.12 counter read-only
Indicates the total number of IP packets that have been discarded, because of an invalid IP header, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.
                             nwIpFwdIfCtrInBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.13 counter read-only
Indicates the total number of bytes in the IP packets that have been received, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.
                             nwIpFwdIfCtrOutBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.14 counter read-only
Indicates the total number of bytes in the IP packets that have been transmitted, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.
                             nwIpFwdIfCtrFwdBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.15 counter read-only
Indicates the total number of bytes in the IP packets that have been forwarded, on the router port for which the entry exists, during nwIpFwdIfCtrOperationalTime.
                             nwIpFwdIfCtrFilteredBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.16 counter read-only
Indicates the total number of bytes in the IP packets that have been administratively filtered, during nwIpFwdIfCtrOperationalTime, on the IP router port for which the entry exists.
                             nwIpFwdIfCtrDiscardBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.17 counter read-only
Indicates the total number of bytes in the IP packets that have been discarded, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.
                             nwIpFwdIfCtrHostInPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.18 counter read-only
Indicates the total number of IP packets that have been successfully delivered to the local host, that were received on the router port for which the entry exists, during nwIpFwdIfCtrOperationalTime.
                             nwIpFwdIfCtrHostOutPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.19 counter read-only
Indicates the total number of IP packets that have been transmitted by the local host, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.
                             nwIpFwdIfCtrHostDiscardPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.20 counter read-only
Indicates the total number of IP packets discarded by the local host due to a lack of host resources, that were received on the router port for which the entry exists, during nwIpFwdIfCtrOperationalTime.
                             nwIpFwdIfCtrHostInBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.21 counter read-only
Indicates the total number of bytes in the IP packets that have been successfully delivered to the local host, that were received on the router port for which the entry exists, during nwIpFwdIfCtrOperationalTime.
                             nwIpFwdIfCtrHostOutBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.22 counter read-only
Indicates the total number of bytes in the IP packets that have been transmitted by the local host, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.
                             nwIpFwdIfCtrHostDiscardBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.23 counter read-only
Indicates the total number of bytes in the IP packets that have been discarded by the local host due to a lack of host resources, that were received on the router port for which the entry exists, during nwIpFwdIfCtrOperationalTime.
         nwIpTopology 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4
             nwIpDistanceVector 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1
                 nwIpRip 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1
                     nwIpRipSystem 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1
                         nwIpRipConfig 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1
                             nwIpRipAdminStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.1 integer read-write
Sets the administrative state of the RIP routing protocol system-wide. Enabled (3) causes RIP to become active on all router ports configured and enabled for IP Routing Services. Disabled (2) causes RIP to become inactive. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                             nwIpRipOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.2 integer read-only
Indicates the current operating condition of the RIP routing protocol system-wide. The value of nwIpRipOperStatus indicates any problem with your RIP configuration. A value of 6 indicates that regardless of the value of nwIpRipAdminStatus, RIP is not operating because of an invalid configuration. Enumeration: 'pending-disable': 4, 'invalid-config': 6, 'enabled': 3, 'disabled': 2, 'other': 1, 'pending-enable': 5.
                             nwIpRipAdminReset 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.3 integer read-write
Resets the RIP routing protocol. Reset (2) forces a system-wide restart of the protocol system-wide without a graceful shutdown on any active router ports. Enumeration: 'reset': 2, 'other': 1.
                             nwIpRipOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.4 timeticks read-only
Indicates the elapsed time, in hundredths of a second, that nwIpRipOperStatus, has been in its current state.
                             nwIpRipVersion 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.5 displaystring read-only
Indicates the current revision level of the RIP routing protocol firmware, in textual format.
                             nwIpRipStackSize 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.6 integer read-write
Specifies the stack size of the RIP routing protocol thread. In order for a change of this value to take effect, the protocol (nwIpRipAdminReset), IP Routing Services (nwIpSysAdminReset), or the device running Routing Services must be reset.
                             nwIpRipThreadPriority 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.7 integer read-write
Specifies the run-time execution priority of the RIP routing protocol thread. In order for a change of this value to take effect, RIP (nwIpRipAdminReset), IP Routing Services (nwIpAdminReset), or the device running Routing Services must be reset.
                             nwIpRipDatabaseThreshold 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.8 integer read-write
Specifies the run-time maximum number of RIP entries that can be held in the RIP route table.
                             nwIpRipAgeOut 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.9 integer read-write
Specifies the amount of time, in seconds, that an inactive route table entry will be allowed to remain in the RIP route table before it is aged-out.
                             nwIpRipHoldDown 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.10 integer read-write
Specifies the amount of time (in seconds) to wait before removing an entry from the route table, after receiving an update indicating that the destination has become unreachable. All routers exchanging RIP routing protocol information must have the same hold down time. The time must be long enough to allow all participating routers to receive the same update.
                         nwIpRipCounters 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2
                             nwIpRipCtrAdminStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.1 integer read-write
Sets the administrative state of the aggregate (system-wide) RIP routing protocol packet and byte counters. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to become inactive. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                             nwIpRipCtrReset 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.2 integer read-write
Resets the aggregate (system-wide) RIP routing protocol packet and byte counters. Reset (2) resets the RIP aggregate counters to 0. nwIpRipCtrOperationalTime is also reset to 0. Enumeration: 'reset': 2, 'other': 1.
                             nwIpRipCtrOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.3 timeticks read-only
Indicates the elapsed time, in hundredths of a second, that nwIpRipCtrAdminStatus has been in the current state.
                             nwIpRipCtrInPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.4 counter read-only
Indicates the total number of RIP packets that have been received, system-wide, during nwIpRipCtrOperationalTime.
                             nwIpRipCtrOutPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.5 counter read-only
Indicates the total number of RIP packets that have been transmitted, system-wide, during nwIpRipCtrOperationalTime.
                             nwIpRipCtrFilteredPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.6 counter read-only
Indicates the total number of RIP packets that have been administratively filtered, system-wide, during nwIpRipCtrOperationalTime.
                             nwIpRipCtrDiscardPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.7 counter read-only
Indicates the total number of RIP packets that have been discarded, system-wide, during nwIpRipCtrOperationalTime.
                             nwIpRipCtrInBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.8 counter read-only
Indicates the total number of bytes in the RIP packets that have been received, system-wide, during nwIpRipCtrOperationalTime.
                             nwIpRipCtrOutBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.9 counter read-only
Indicates the total number of bytes in the RIP packets that have been transmitted, system-wide, during nwIpRipCtrOperationalTime.
                             nwIpRipCtrFilteredBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.10 counter read-only
Indicates the total number of bytes in the RIP packets that have been administratively filtered, system-wide, during nwIpRipCtrOperationalTime.
                             nwIpRipCtrDiscardBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.11 counter read-only
Indicates the total number of bytes in the RIP packets that have been discarded, system-wide, during nwIpRipCtrOperationalTime.
                     nwIpRipInterfaces 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2
                         nwIpRipIfConfig 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1
                             nwIpRipIfTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1 no-access
This table contains an entry for each router port. Each entry can contain different values, allowing the routing protocol configuration to vary from router port to router port. This table is indexed by nwIpRipIfIndex, which indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.
                                 nwIpRipIfEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1 no-access
Each entry contains the RIP routing protocol configuration for the router port for which the entry exists.
                                     nwIpRipIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.1 integer read-only
Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.
                                     nwIpRipIfAdminStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.2 integer read-write
Sets the administrative state of the RIP routing protocol on the router port for which the entry exists. Enabled (3) causes RIP to become active on the router port. Disabled (2) causes RIP to become inactive on the router port. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                                     nwIpRipIfOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.3 integer read-only
Indicates the current operating condition of the RIP routing protocol on the router port for which the entry exists. The value of nwIpRipIfOperStatus indicates any problem with your RIP configuration on the router port. A value of 6 indicates that regardless of the value of nwIpRipIfAdminStatus, RIP is not operating on the port because of an invalid configuration. Enumeration: 'disabled': 2, 'pending-disable': 4, 'other': 1, 'enabled': 3, 'pending-enable': 5.
                                     nwIpRipIfOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.4 timeticks read-only
Indicates the elapsed time, in hundredths of a second, nwIpRipIfOperStatus, has been in its current state.
                                     nwIpRipIfVersion 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.5 integer read-write
Indicates the revision level of the RIP routing protocol firmware on the router port for which the entry exists, in textual format.
                                     nwIpRipIfAdvertisement 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.6 integer read-write
Sets the interval, in seconds, at which RIP advertises the RIP route table on the router port for which the entry exists.
                                     nwIpRipIfFloodDelay 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.7 integer read-write
Sets the length of time, in seconds, that the RIP routing protocol should wait after discovering that a directly connected route has gone down, before flooding updates (triggered updates) on the router port for which the entry exists. A value of 0 specifies that if a directly connected route goes down, updates should be sent immediately.
                                     nwIpRipIfRequestDelay 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.8 integer read-write
Sets the length of time, in hundredths of a second, that the RIP routing protocol should wait after receiving a route request packet, before sending a response on the router port for which the entry exists. A value of 0 specifies that if a route request packet is received on the port, a response should be sent immediately.
                                     nwIpRipIfPriority 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.9 integer read-write
This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting this object has no effect.
                                     nwIpRipIfHelloTimer 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.10 integer read-write
This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interfaced to all the Cabletron Routing Services protocol-specific MIBs. Setting this object has no effect.
                                     nwIpRipIfSplitHorizon 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.11 integer read-write
Sets the operating condition of Split Horizon on the router port for which the entry exists. When Split Horizon is enabled, the RIP routing protocol keeps track of which router port route information is received on, and prevents information about a route form being sent back out the same router port it was received on. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                                     nwIpRipIfPoisonReverse 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.12 integer read-write
Sets the operating condition of Poison Reverse on the router port for which the entry exists. When Poison Reverse is enabled, the RIP routing protocol advertises any downed route as unreachable during the period of time that it must wait before removing the route from the route table. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                                     nwIpRipIfSnooping 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.13 integer read-write
Controls the operation of RIP Snooping on the router port. When RIP Snooping is enabled the RIP routing protocol operates in passive mode so that it receives route information, builds and maintains a route table, but does not advertise the route table or send updates on the router port for which the entry exists. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                                     nwIpRipIfType 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.14 integer read-only
Indicates whether the directly connected network segment does or does not support broadcast media access. If broadcast media access is supported, RIP advertisements are sent out one broadcast packet per router port. If broadcast media is not supported, RIP advertisements are sent directly to each neighbor router access. Enumeration: 'bma': 2, 'other': 1, 'nbma': 3.
                                     nwIpRipIfXmitCost 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.15 integer read-write
This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting this object has no effect.
                                     nwIpRipIfAclIdentifier 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.16 integer read-write
Specifies the Access Control ID of the access control list in effect for RIP routing protocol packets on the router port for which the entry exists. A value of 0 indicates that there is no access control list in effect for RIP routing protocol packets on the router port.
                                     nwIpRipIfAclStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.17 integer read-write
Controls the operation of the access control list identified by nwIpRipIfAclIdentifier. Enabled (3) applies the access control list to all RIP routing protocol packet traffic on the router port for which the entry exists. Disabled (2) prevents the access control list from being applied. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                         nwIpRipIfCounters 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2
                             nwIpRipIfCtrTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1 no-access
This table contains an entry for each router port.This table is indexed by nwIpRipIfCtrIfIndex which indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.
                                 nwIpRipIfCtrEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1 no-access
Each entry indicates the current packet and byte count of RIP routing protocol packets on the router port for which the entry exists.
                                     nwIpRipIfCtrIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.1 integer read-only
Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.
                                     nwIpRipIfCtrAdminStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.2 integer read-write
Sets the administrative state of the RIP packet and byte counters on the router port for which this entry exists. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to become inactive. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                                     nwIpRipIfCtrReset 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.3 integer read-write
Resets the per-port RIP packet and byte counters on the router port for which this entry exists. Reset (2) resets the counters to 0. nwIpRipIfCtrOperationalTime is also reset to 0. Enumeration: 'reset': 2, 'other': 1.
                                     nwIpRipIfCtrOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.4 timeticks read-only
Indicates the elapsed time, in hundredths of a second, that nwIpRipIfCtrAdminStatus has been in the current state.
                                     nwIpRipIfCtrInPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.5 counter read-only
Indicates the total number of RIP routing protocol packets that have been received, during nwIpRipIfCtrOperationalTime, on the router port for which the entry exists.
                                     nwIpRipIfCtrOutPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.6 counter read-only
Indicates the total number of RIP packets that have been transmitted, during nwIpRipIfCtrOperationalTime, on the router port for which the entry exists.
                                     nwIpRipIfCtrFilteredPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.7 counter read-only
Indicates the total number of RIP packets that have been administratively filtered during nwIpRipIfCtrOperationalTime, on the router port for which the entry exists.
                                     nwIpRipIfCtrDiscardPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.8 counter read-only
Indicates the total number of RIP routing protocol packets that have been discarded, during nwIpRipIfCtrOperationalTime. that were received through the router port for which the entry exists.
                                     nwIpRipIfCtrInBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.9 counter read-only
Indicates the total number of bytes in the RIP routing protocol packets that have been received, during nwIpRipIfCtrOperationalTime, on the router port for which this entry exists.
                                     nwIpRipIfCtrOutBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.10 counter read-only
Indicates the total number of bytes in the RIP routing protocol packets that have been transmitted, during nwIpRipIfCtrOperationalTime, on the router port for which the entry exists.
                                     nwIpRipIfCtrFilteredBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.11 counter read-only
Indicates the total number of bytes in the RIP routing protocol packets that have been administratively filtered, during nwIpRipIfCtrOperationalTime, on the router port for which the entry exists.
                                     nwIpRipIfCtrDiscardBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.12 counter read-only
Indicates the total number of bytes in the RIP routing protocol packets that have been discarded during nwIpRipIfCtrOperationalTime, that were received on the router port for which the entry exists.
                     nwIpRipDatabase 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3
                         nwIpRipRouteTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1 no-access
This table contains the RIP route table. This table contains an entry for each route learned through the RIP routing protocol. Only the best routes from this table are added to the IP forwarding table to be used for packet switching.
                             nwIpRipRouteEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1 no-access
Each entry describes the RIP route to the destination network for which the entry exists.
                                 nwIpRipRtNetId 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.1 ipaddress read-only
This is the primary index into the RIP route table. This number indicates the IP Address of the destination for which the entry exists.
                                 nwIpRipRtIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.2 integer read-only
This is a secondary index into IP-RIP route table. This number corresponds to the value of MIB 2 ifindex, which identifies the router port for which the entry exists.
                                 nwIpRipRtSrcNode 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.3 ipaddress read-only
This is a secondary index into the RIP route table. This number indicates the IP Address of the source router from which this route was learned. A value of 0.0.0.0 indicates that the source is on the network segment directly connected to the router port, nwIpRipRtIfIndex.
                                 nwIpRipRtMask 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.4 ipaddress read-only
Indicates the Subnet Mask of the IP Address for which the entry exists.
                                 nwIpRipRtHops 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.5 integer read-only
Indicates the number of hops required to reach the destination for which the entry exists.
                                 nwIpRipRtAge 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.6 timeticks read-only
Indicates the amount of time, in seconds, since an update has been received for the route for which the entry exists.
                                 nwIpRipRtType 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.7 integer read-only
Indicates whether the destination network is directly connected through the router port specified by nwIpRipRtIfIndex, or is indirectly connected through another router, specified by nwIpRipRtSrcNode. Enumeration: 'remote': 4, 'direct': 3, 'invalid': 2, 'other': 1, 'static': 5, 'ospf': 6.
                                 nwIpRipRtFlags 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.8 integer read-only
Specifies properties of the RIP route. The bit mask is as follows: source-changed (1), best-source (2), local net (4), net-down (8), update-fib-only (16).
                     nwIpRipFilters 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.4
             nwIpLinkState 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2
                 nwIpOspf 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1
                     nwIpOspfSystem 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1
                         nwIpOspfConfig 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.1
                             nwIpOspfAdminStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.1.1 integer read-write
Sets the administrative state of the OSPF routing protocol. enabled(3) causes OSPF to become active on any IP configured router ports. disabled(2) causes OSPF to perform a graceful shutdown on any active IP configured router ports. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                             nwIpOspfOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.1.2 integer read-only
Indicates the current operating condition of OSPF. Enumeration: 'disabled': 2, 'pending-disable': 4, 'other': 1, 'enabled': 3, 'pending-enable': 5.
                             nwIpOspfAdminReset 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.1.3 integer read-write
Resets OSPF. reset(2) will force a restart of OSPF on any active IP router ports, configured for OSPF, without a graceful shutdown, without affecting any other routing services. Enumeration: 'reset': 2, 'other': 1.
                             nwIpOspfOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.1.4 timeticks read-only
Indicates the amount of time (#of time ticks) that OSPF has been in its current operational state.
                             nwIpOspfVersion 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.1.5 displaystring read-only
Indicates the current Cabletron revision level of OSPF in textual format, not the OSPF version supported.
                             nwIpOspfStackSize 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.1.6 integer read-write
Specifies the stack size for the OSPF thread. In order for a change of this value to take effect, OSPF (nwIpOspfAdminStatus), IP (nwIpSysAdminStatus), or the device itself must be reset.
                             nwIpOspfThreadPriority 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.1.7 integer read-write
Specifies the run-time execution priority of the OSPF protocol thread. In order for a change of this value to take effect, OSPF or the IP routing services, or the device must be reset.
                         nwIpOspfCounters 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2
                             nwIpOspfCtrAdminStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.1 integer read-write
Sets the operating condition of the aggregate (device-wide) OSPF packet and byte counters. enable (3) causes these counters to become active on any router ports running OSPF. disabled (2) cause these counters to become inactive on any router port running OSPF. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                             nwIpOspfCtrReset 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.2 integer read-write
Resets the aggregate (device-wide) OSPF packet and byte counters. reset(2) resets the aggregate OSPF counters to 0 and nwIpOspfCtrOperationalTime to 0. Enumeration: 'reset': 2, 'other': 1.
                             nwIpOspfCtrOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.3 timeticks read-only
Indicates the amount of time (# of time ticks) that the aggregate OSPF packet and byte counters have been active.
                             nwIpOspfCtrInPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.4 counter read-only
Indicates the total number of OSPF packets that have been received, device-wide, during nwIpOspfCtrOperationalTime.
                             nwIpOspfCtrOutPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.5 counter read-only
Indicates the total number of OSPF packets that have been transmitted, device-wide, during nwIpOspfCtr- Operational-Time.
                             nwIpOspfCtrFilteredPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.6 counter read-only
Indicates the total number of OSPF packets that have been administratively filtered, device-wide, during nwIpOspfCtrOperationalTime.
                             nwIpOspfCtrDiscardPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.7 counter read-only
Indicates the total number of OSPF packets that have been discarded, device-wide, during nwIpOspfCtrOperationalTime.
                             nwIpOspfCtrInBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.8 counter read-only
Indicates the total number of bytes in the OSFP packets that have been received, device-wide, during nwIpOspfCtrOperationalTime.
                             nwIpOspfCtrOutBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.9 counter read-only
Indicates the total number of bytes in the OSPF packets that have been transmitted, device-wide, during nwIpOspfCtrOperationalTime.
                             nwIpOspfCtrFilteredBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.10 counter read-only
Indicates the total number of bytes in the OSPF packets that have been administratively filtered, device-wide, during nwIpOspfCtrOperationalTime.
                             nwIpOspfCtrDiscardBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.11 counter read-only
Indicates the total number of bytes in the OSPF packets that have been discarded, during nwIpOspfCtrOperationalTime.
                     nwIpOspfInterfaces 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2
                         nwIpOspfIfConfig 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1
                             nwIpOspfIfTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1 no-access
This table contains the OSPF configuration information for each IP router port
                                 nwIpOspfIfEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1 no-access
Each entry specifies the OSPF configuration information for the IP router port for which the entry exists.
                                     nwIpOspfIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.1 integer read-only
This is the primary index into the OSPF interface table. This number corresponds to the index into the MIB-2 Interface Table which describes the router port for which the entry exists.
                                     nwIpOspfIfAdminStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.2 integer read-write
Sets the administrative state of OSPF on the IP router port for which the entry exists. enabled(3) causes OSPF to become active on the router port. disabled(2) causes OSPF to become inactive on the router port. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                                     nwIpOspfIfOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.3 integer read-only
Sets the administrative state of OSPF on the IP router port for which the entry exists. enabled(3) causes OSPF to become active on the router port. disabled(2) causes OSPF to become inactive on the router port. Enumeration: 'disabled': 2, 'pending-disable': 4, 'other': 1, 'enabled': 3, 'pending-enable': 5.
                                     nwIpOspfIfOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.4 timeticks read-only
Indicates the elapsed time, in hundredths of a second, that nwIpOspfIfAdminStatus has been in its current state.
                                     nwIpOspfIfVersion 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.5 integer read-write
Indicates the OSPF protocol revision level supported on the router port.
                                     nwIpOspfIfSnooping 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.6 integer read-write
Controls the operation of OSPF Snooping on the IP router port for which the entry exists.OSPF Snooping is operating OSPF in passive mode, so it receives route information, builds and maintains a route information table, but does not advertise. enable (3) turns on OSPF Snooping. disable (2) turns it off. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                                     nwIpOspfIfType 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.7 integer read-only
Specifies whether the attached network segment does or does not support broadcast media access. bma (2) indicates that route advertisements can be sent as broadcasts. nbma (3) indicates that route advertisements must be addresses directly to each neighbor. Enumeration: 'bma': 2, 'other': 1, 'nbma': 3.
                                     nwIpOspfIfAclIdentifier 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.8 integer read-write
Specifies the Access Control List ID of the access control list applied to OSPF traffic on the IP router port for which the entry exists. A value of 0 indicates that no Access List applies.
                                     nwIpOspfIfAclStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.9 integer read-write
Controls the operation of the access list configured for OSPF traffic on the IP router port for which the entry exists. enabled(3) causes the access list to be applied. disabled(2) causes the access list not to be applied. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                         nwIpOspfIfCounters 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2
                             nwIpOspfIfCtrTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1 no-access
This table contains the OSPF packet and byte counter for each configured OSPF router port.
                                 nwIpOspfIfCtrEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1 no-access
Each entry specifies the OSPF packet and byte counter for for the router for which the entry exists.
                                     nwIpOspfIfCtrIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.1 integer read-only
This is the primary index into the OSPF interface counter table. This number corresponds to the index into the MIB-2 Interface Table which describes the router port for which the entry exists.
                                     nwIpOspfIfCtrAdminStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.2 integer read-write
Sets the administrative state of the OSPF packet and byte counters on the IP router port for which the entry exists. enabled(3) causes these counters to become active on the router port. disabled(2) turns these counters off. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                                     nwIpOspfIfCtrReset 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.3 integer read-write
Resets the OSPF packet and byte counters on the router port for which the entry exists. reset (2) resets the interface-specific counters to 0 and nwIpOspfIfCtrOperationalTime to 0. Enumeration: 'reset': 2, 'other': 1.
                                     nwIpOspfIfCtrOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.4 timeticks read-only
Indicates the amount of time (# of time ticks) that the interface-specific OSPF packet and byte counters have been active on the router port for which the entry exists.
                                     nwIpOspfIfCtrInPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.5 counter read-only
Indicates the total number of OSPF packets that have been received, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime.
                                     nwIpOspfIfCtrOutPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.6 counter read-only
Indicates the total number of OSPF packets that have been transmitted, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime.
                                     nwIpOspfIfCtrFilteredPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.7 counter read-only
Indicates the total number of OSPF packets that have been administratively filtered, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime.
                                     nwIpOspfIfCtrDiscardPkts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.8 counter read-only
Indicates the total number of OSPF packets that have been discarded, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime.
                                     nwIpOspfIfCtrInBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.9 counter read-only
Indicates the total number of bytes in the OSPF packets that have been received, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime.
                                     nwIpOspfIfCtrOutBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.10 counter read-only
Indicates the total number of bytes in the OSPF packets that have been transmitted, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime.
                                     nwIpOspfIfCtrFilteredBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.11 counter read-only
Indicates the total number of bytes in the OSPF packets that have been administratively filtered, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime
                                     nwIpOspfIfCtrDiscardBytes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.12 counter read-only
Indicates the total number of bytes in the OSPF packets that have been discarded, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime.
                     nwIpOspfDatabase 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.3
                     nwIpOspfFilters 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.4
         nwIpFib 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5
             nwIpFibSystem 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.1
                 nwIpRipRoutePriority 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.1.1 integer read-write
Specifies the route priority assigned to routes learned by the RIP routing protocol.
                 nwIpOSPFRoutePriority 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.1.2 integer read-write
Specifies the route priority assigned to routes learned by the OSPF routing protocol.
                 nwIpStaticRoutePriority 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.1.3 integer read-write
Specifies the route priority assigned to routes learned by statically configured routes..
             nwIpOspfFib 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2
                 nwIpOspfFibControl 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.1
                     nwIpOspfForward 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.1.1 integer read-only
The total number of valid Cabletron IP OSPF FIB entries to include static, dynamic, RIP and BGP4 type routes.
                     nwIpOspfLeakAllStaticRoutes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.1.2 integer read-write
Add all static routes in the IP FIB to the Cabletron IP OSPF FIB for advertisement in OSPF routing protocol announcements. Enumeration: 'disabled': 2, 'enabled': 1.
                     nwIpOspfLeakAllRipRoutes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.1.3 integer read-write
Add all RIP routes in the IP FIB to the Cabletron IP OSPF FIB for advertisement in OSPF routing protocol announcements.
                     nwIpOspfLeakAllBgp4Routes 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.1.4 integer read-write
Add all BGP4 routes in the IP FIB to the Cabletron IP OSPF FIB for advertisement in OSPF routing protocol announcements.
                 nwIpOspfFibEntries 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2
                     nwIpOspfStaticTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1 no-access
A table of statically configured entries in the Cabletron IP OSPF FIB.
                         nwIpOspfStaticEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1 no-access
A list of information for each static entry in the Cabletron IP OSPF FIB.
                             nwIpOspfStaticDest 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.1 ipaddress read-only
The network Address of a static route leaked from the IP FIB into the Cabletron IP OSPF FIB.
                             nwIpOspfStaticForwardMask 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.2 ipaddress read-only
The network mask of a static route leaked from the IP FIB into the Cabletron IP OSPF FIB.
                             nwIpOspfStaticNextHop 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.3 ipaddress read-only
The next hop address of a static route leaked from the IP FIB into the Cabletron IP OSPF FIB. A value of 0.0.0.0 indicates that packets for the external destination should be forwarded to the advertising router.
                             nwIpOspfStaticMetric 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.4 integer read-write
The Cabletron IP OSPF advertised cost of reaching the leaked static route.
                             nwIpOspfStaticMetricType 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.5 integer read-write
The Cabletron IP OSPF metric type to be advertised using OSPF: Autonomous System External type 1 (1) or Autonomous System External type 2 (2).
                             nwIpOspfStaticStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.6 integer read-write
By setting this OID to inactive for a particular static route, the static route will be added to the IP OSPF FIB but not advertised. Setting this OID to active for a particular static route, the static route will be advertised by the OSPF router. By setting this OID to delete for a particular static route, the entry will no longer be advertised using OSPF and will be deleted from the IP OSPF FIB. Enumeration: 'active': 2, 'inactive': 1, 'delete': 3.
                     nwIpOspfDynamicTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.2
                     nwIpOspfRipTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.3
                     nwIpOspfBgp4Table 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.4
         nwIpEndSystems 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6
             nwIpHostsSystem 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.1
                 nwIpHostsTimeToLive 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.1.1 integer read-only
Indicates the amount of time (number of minutes) that an entry can remain in the ARP cache.
                 nwIpHostsRetryCount 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.1.2 counter read-only
Indicates the maximum number of times IP Routing Services will retry each attempt to resolve a host address.
             nwIpHostsInterfaces 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2
                 nwIpHostCtlTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1 no-access
This table contains the control information for maintaining a cache of IP host addresses on each router port. Note that the of actual entries are maintained by the IP Address Translation Table (Net-to-Media) of MIB 2.
                     nwIpHostCtlEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1 no-access
Each entry contains the control information for maintaining the cache on each router port.
                         nwIpHostCtlIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.1 integer read-only
Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.
                         nwIpHostCtlAdminStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.2 integer read-write
This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol specific MIBS. Setting this object has no effect. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
                         nwIpHostCtlOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.3 integer read-only
Indicates the current operating condition of the IP Host Address cache on the router port for which the entry exists. Enumeration: 'disabled': 2, 'pending-disable': 4, 'other': 1, 'enabled': 3, 'pending-enable': 5.
                         nwIpHostCtlOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.4 timeticks read-only
Indicates the elapsed time, in hundredths of a second, that nwIpHostCtlOperStatus has been in the current state.
                         nwIpHostCtlProtocol 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.5 integer read-write
Controls the operation of the ARP protocol on the router port for which the entry exists. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
                         nwIpHostCtlSnooping 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.6 integer read-write
Controls ARP Snooping on the router port for which the entry exists. Given the ARP protocol is enabled, nwIpHostCtlProtocol=3, setting nwIpHostCtlIfSnooping to enabled (3) turns on ARP Snooping. When ARP Snooping is enabled the source IP and physical addresses of all ARP packets received on the router port are added to the MIB 2 Net-to-Media Table. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
                         nwIpHostCtlProxy 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.7 integer read-write
Controls the operations of Proxy ARP on the router port for which the entry exists. Given the ARP protocol is enabled, nwIpHostCtlProtocol=3, setting nwIpHostCtlProxy to enabled (3) turns on Proxy ARP. When Proxy ARP is enabled on a router port, and an ARP request is received, requesting the address for an IP host whose network address is listed on the IP route table, then IP Routing Services sends a Proxy ARP response, with the physical address of the receiving router port in place of the requested host's physical address. Based on this proxy response, the requesting host will then forward packets to the router port, and IP Routing Services will then forward them to the correct destination. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
                         nwIpHostCtlCacheMax 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.8 integer read-write
Indicates the maximum number of entry slots the cache can consist of. nwIpHostCtlCacheMax cannot be set to less than 16. Setting this value does not allocate any memory for the cache.
                         nwIpHostCtlCacheSize 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.9 integer read-only
Indicates the current number of entry slots in the cache. The cache automatically resizes to accommodate all entries up to the maximum number of entries set by nwIpHostCtlCacheMax.
                         nwIpHostCtlNumStatics 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.10 counter read-only
Indicates the total number of static entries in the cache on the router port for which the entry exists. Static entries remain in the cache until they are administratively removed.
                         nwIpHostCtlNumDynamics 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.11 counter read-only
Indicates the number of dynamic entries in the cache on the router port for which the entry exists. Dynamic entries area added and aged out by the ARP protocol.
                         nwIpHostCtlCacheHits 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.12 counter read-only
Indicates the number of times an entry in the cache has been used to successfully provide the physical address required to forward an IP packet on the router port for which the entry exists.
                         nwIpHostCtlCacheMisses 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.13 counter read-only
Indicates the number of times the physical address required to forward an IP packet has not been found in the cache on the router port for which the entry exists.
             nwIpHostsToMedia 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3
                 nwIpHostMapTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1 no-access
The Ip Address translation table used for mapping an IP address to physical address, framing, port and circuit identifier, if applicable.
                     nwIpHostMapEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1 no-access
Each entry contains one IpAddress to 'physical' address equivalence, including a circuit identifier if applicable. Also provided is the framing and port number required to converse with this host.
                         nwIpHostMapIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.1 integer read-only
This is the primary (major) index into the HostMap table. This number corresponds to the index into the MIB-2 Interfaces Group which describes the IP router port for which the entry exists.
                         nwIpHostMapIpAddr 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.2 ipaddress read-only
The IpAddress corresponding to the media-dependent 'physical' address and circuit identifier (if applic).
                         nwIpHostMapPhysAddr 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.3 physaddress read-write
The media-dependent 'physical' address. The value of this object is 0 for entries indicating native-wan(8) framing.
                         nwIpHostMapType 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.4 integer read-write
Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the nwIpHostMapTable. That is, it effectively dissasociates the circuit identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant nwIpHostMapType object. Enumeration: 'inactive': 5, 'static': 4, 'other': 1, 'dynamic': 3, 'invalid': 2.
                         nwIpHostMapCircuitID 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.5 integer read-write
The identifier for the virtual circuit present on the interface. On an interface configured for Frame Relay, this number is the DLCI for the IP Address at the end of the circuit. For non-WAN interfaces, the value of this object is zero.
                         nwIpHostMapFraming 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.6 integer read-write
Specifies the framing type required to converse with the host for which this entry exists. Enumeration: 'encapenetsnap': 11, 'encaptrsnap': 14, 'localtalk': 7, 'nativewan': 8, 'other': 1, 'encapfddisnap': 16, 'slip': 5, 'snap': 3, 'ethernet': 2, 'encapenet': 9, 'canonical': 17.
                         nwIpHostMapPortNumber 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.7 integer read-only
The unique value for the logical port number. It's value ranges between 1 and a maximum value which is dependent on both the number of interfaces in the system and the number of circuits present on interfaces which are of WAN type.
         nwIpAccessControl 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7
             nwIpAclValidEntries 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.1 gauge read-only
Indicates the number of valid entries that exist in the access control list table.
             nwIpAclTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2 no-access
This table contains the access control list information for IP traffic. This table contains entries, each of which allows packet forwarding between source/destination pairs to be permitted or denied. The list is identified by the Access Control List ID. Each list may contain multiple entries ordered by sequence number. When an access control list is searched, it is searched in sequence number order and the first match found ends the search. If no match is found, access defaults to permitted.
                 nwIpAclEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1 no-access
Each entry contains IP source/destination access information.
                     nwIpAclIdentifier 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.1 integer read-only
This is the primary (major) index into the IP access control list table. This value identifies the access control list by a unique identifier arbitrarily assigned by the user. All entries that have the same value for nwIpAclIdentifier belong to the same access control list.
                     nwIpAclSequence 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.2 integer read-only
This is the secondary (minor) index into the IP access control list table. This number corresponds to a sequence number used to order multiple entries within the same access control list.
                     nwIpAclPermission 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.3 integer read-write
Specifies whether access is allowed or denied between the source and destination address pair. Note that source and destination are interchangeable when bi-directional control is selected. To remove an existing entry set nwIpAclPermission to invalid (2). Invalid entries disappear after reboot. Enumeration: 'deny': 4, 'invalid': 2, 'permit-bidirectional': 5, 'other': 1, 'permit': 3, 'deny-bidirectional': 6.
                     nwIpAclMatches 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.4 counter read-only
Indicates the number of matches on this entry that have resulted in the permit/deny access restriction being applied as part of the forwarding process.
                     nwIpAclDestAddress 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.5 ipaddress read-write
Specifies the destination IP address used to compare for matches on the access control list.
                     nwIpAclDestMask 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.6 ipaddress read-write
Specifies the mask to be applied to the destination address to determine the portion of the address used to compare for matches on the access control list. Only bits that are matching are used in the comparison. This allows for wild-carding and partial matching.
                     nwIpAclSrcAddress 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.7 ipaddress read-write
Specifies the source address used to compare for matches on the access control list.
                     nwIpAclSrcMask 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.8 ipaddress read-write
Specifies the mask to be applied to the source address to determine the portion of the address to be used to compare for matches on the access control list. Only bits that are matching are used in the comparison. This allows for wild-carding and partial matching.
                     nwIpAclProtocol 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.9 integer read-write
Specifies the IP protocols checked to compare for matches on the access control list. Enumeration: 'all': 2, 'other': 1, 'icmp': 3, 'udp': 4, 'tcp': 5.
                     nwIpAclPortNumber 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.10 integer read-write
Specifies the port number used to compare for matches on the access control list. nwIpAclPortNumber only applies if nwIpAclProtocol is equal to 4 or 5, UDP or TCP nwIpAclPortNumber ranges from 0 to 65536. The value 0 is a wildcard which matches any port.
         nwIpFilters 1.3.6.1.4.1.52.4.2.2.2.3.1.2.8
         nwIpRedirector 1.3.6.1.4.1.52.4.2.2.2.3.1.2.9
             nwIpRedirectorSystem 1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1
                 nwIpRedirectTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1 no-access
This table contains an entry for each UDP port configured for UDP broadcast redirection.
                     nwIpRedirectEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1 no-access
Each entry contains the UDP port number of and IP Address to which UDP packets received as LAN broadcasts, should be redirected.
                         nwIpRedirectPort 1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1.1 integer read-only
This is the primary index into the UDP redirector table, identifying the UDP port number of the packets that will be redirected.
                         nwIpRedirectAddress 1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1.2 ipaddress read-write
Sets the IP address to which the UDP broadcast packets matching the UDP redirect port value (nwIpRedirectPort) will be forwarded.
                         nwIpRedirectType 1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1.3 integer read-write
Set this object to enable or disable the redirector feature for the UDP port specified by nwIpRedirectAddress. Enumeration: 'forward': 1, 'delete': 2.
                         nwIpRedirectCount 1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1.4 counter read-only
Indicates how many UDP broadcast packets have been redirected, as specified by this entry.
             nwIpRedirectorInterface 1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.2
         nwIpEvent 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10
               nwIpEventLogConfig 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.1
                   nwIpEventAdminStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.1.1 integer read-write
Sets the administrative state of IP event logging. enabled(3) causes the event log to become active. disabled(2) causes the event log to become inactive. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   nwIpEventMaxEntries 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.1.2 integer read-write
Sets the administrative state of IP event logging. Enabled (3) causes the event log to become active. Disabled (2) causes the event log to become inactive.
                   nwIpEventTraceAll 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.1.3 integer read-write
Enabled (3) allows logging of all event types on all router ports for all protocols and components. Disabled (2) causes the filter table to specify which events to log. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
               nwIpEventLogFilterTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2
                   nwIpEventFilterTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1 no-access
This table contains an entry for each event filter configured for IP Routing Services events.
                       nwIpEventFilterEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1 no-access
Each entry describes an event filter which defines a particular type of event to be logged to the event log. The value of nwIpEventProtocol indicates the value used in either the nwRtgProtocolTable or the nwComponentTable in the Cabletron Routing Services MIB, which identifies the protocol to which the entry exists.
                           nwIpEventFltrProtocol 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.1 integer read-only
Indicates the value of the Cabletron Routing Services MIB nwRtgProtocolInstance or nwComponentRtgInstance which identifies the protocol involved in the event for which the event filter exists.
                           nwIpEventFltrIfNum 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.2 integer read-only
Specifies the router port involved in the event for which the event filter exists.
                           nwIpEventFltrControl 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.3 integer read-write
Set this value to 3 to add the entry to the event filter table. Set this value to 2 to remove the entry from the event filter table. Enumeration: 'add': 3, 'other': 1, 'delete': 2.
                           nwIpEventFltrType 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.4 integer read-write
This 6 bit mask specifies the types of events to be logged. By default all 6 bits are set to 1, indicating that all types of events are to be logged. Setting any bit to 0 removes an event type from this field and prevents that type of event from being logged.Setting any bit to 1 adds an event type to this field and enables that type of event to be logged. Enumeration: 'xmit': 8, 'rcv': 4, 'misc': 1, 'timer': 2, 'diags': 32, 'error': 64, 'event': 16.
                           nwIpEventFltrSeverity 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.5 integer read-write
Specifies the level of severity an event must meet in order to be logged. Controls the amount of event logging by ignoring events of a lower priority than specified by this filter value. `Highmed' ignores only events of the lowest severity. `Highlow' logs all events highest priority through lowest. `Highest' severity causes all events except those of the highest severity to be ignored. `Highmed' severity is the default setting which causes only events of the lowest severity to be ignored. `Highlow' severity logs all events, regardless of severity. Enumeration: 'highmed': 2, 'highest': 1, 'highlow': 3.
                           nwIpEventFltrAction 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.6 integer read-write
Specifies how the events are to be logged. Logging to the `log' stores the events in the event log table (nwIpEventFltrAction). Logging to `trap' sends events out through the trap mechanism. Enumeration: 'log': 1, 'log-trap': 3, 'trap': 2.
               nwIpEventLogTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3
                   nwIpEventTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1 no-access
This table contains an entry for each event that has been logged.
                       nwIpEventEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1 no-access
Each entry contains the information about an event that has been logged to the event table.
                           nwIpEventNumber 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.1 integer read-only
An ordinal value assigned to the event for which the log entry exists. nwIpEventNumber is assigned so that each event in the event log can be uniquely identified by the value of nwIpEventNumber.
                           nwIpEventTime 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.2 timeticks read-only
Indicates the time at which the event was logged to the event log.
                           nwIpEventType 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.3 integer read-only
Indicates the type of event that was logged. Enumeration: 'xmit': 8, 'rcv': 4, 'misc': 1, 'timer': 2, 'diags': 32, 'error': 64, 'event': 16.
                           nwIpEventSeverity 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.4 integer read-only
Indicates the severity that was assigned to the event. Enumeration: 'highmed': 2, 'highest': 1, 'highlow': 3.
                           nwIpEventProtocol 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.5 integer read-only
Indicates the value of the Cabletron Routing Services MIB nwRtgProtocolInstance or nwComponentInstance which indentifies the protocol or component that was involved in the event.
                           nwIpEventIfNum 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.6 integer read-only
Indicates the router port that was involved in the event.
                           nwIpEventTextString 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.7 octet string read-only
Contains the actual text string that was logged.
         nwIpWorkGroup 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11
               nwIpWgDefTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1 no-access
This table has an entry for each workgroup subnet definition. It is indexed by and arbitrary integer indentifier.
                   nwIpWgDefEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1 no-access
Each entry specifies the configuration and status of an individual work group.
                       nwIpWgDefIdentifier 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.1 integer read-only
An index into the definition table, unique to each entry, arbitrarily assigned by the user.
                       nwIpWgDefHostAddress 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.2 ipaddress read-write
The IP address of the IP router host which applies to every interface included in the workgroup.
                       nwIpWgDefSubnetMask 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.3 ipaddress read-write
The subnet mask for the IP address above, thereby defining the subnet which applies to every interface included in the workgroup.
                       nwIpWgDefSecurity 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.4 integer read-write
A security level which applies to this workgroup as a whole. Security applies in conjunction with the range table below, which locks hosts to interfaces and/or physical address. Packets are filtered out if security is violated. For a high (4) security workgroup, a host must reside on the interface and with the physical address configured in a range table entry. For medium (3) security a host must reside on a configured interface, but unless a physical address is also specified in that range entry, the physical address is not constrained. For low (2) security a host is free to reside on any interface with any physical address if not configured in the range table, but if configured must match a configured entry. If security is none (1) the range table does not apply. Enumeration: 'high': 4, 'none': 1, 'medium': 3, 'low': 2.
                       nwIpWgDefFastPath 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.5 integer read-write
Enabled (3) provides a fast path for packets through the router when both source and destination are within this workgroup - done mostly by skipping IP header validation. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                       nwIpWgDefRowStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.6 integer read-write
This status instance does not support `createAndGo.' A row entry should be created by a set of `createAndWait' which brings the status to `notReady.' The missing row info may then be supplied by setting nwIpWgDefHostAddr and nwIpWgDefSubnetMask. If defaults are OK for nwIpWgDefFastPath and nwIpWgDefSecurity this status instance may then be set to `active' to activate the row. Enumeration: 'createAndWait': 5, 'notInService': 2, 'notReady': 3, 'createAndGo': 4, 'active': 1, 'destroy': 6.
                       nwIpWgDefOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.7 integer read-only
The operational status of this workgroup definition entry. It will be `disabled' if this entry's row status is not active. It will be `subnetConflict' if there is a conflict with an existing active entry in this workgroup definition table. Enumeration: 'disabled': 2, 'internalError': 4, 'subnetConflict': 3, 'ok': 1.
                       nwIpWgDefNumActiveIntf 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.8 integer read-only
The number of interfaces (ports) in this workgroup which have an operational status nwIpWgIfOperStatus of `OK' in the IP Work Group Interface table below.
                       nwIpWgDefNumTotalIntf 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.9 integer read-only
The number of interfaces (ports) in this workgroup which have an administrative status nwIpWgIfRowStatus of `active' in the IP Work Group Interface table below.
               nwIpWgIfTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2 no-access
This table contains an entry for each port in a workgroup. It is indexed by the workgroup identifier and the MIB-II interface indentifier.
                   nwIpWgIfEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1 no-access
Each entry specifies the association of a router port to a defined workgroup.
                       nwIpWgIfDefIdent 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.1 integer read-only
The workgroup identifier. This is the primary index into the IP Work Group Interface Table, matching the index into the Definition Table above.
                       nwIpWgIfIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.2 integer read-only
The interface number. This is the secondary index into the IP Work Group Interface Table, matching the primary index into the MIB-2 IfTable which describes the router port.
                       nwIpWgIfNumActiveHosts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.3 integer read-only
The number of hosts known to be active on this interface in this workgroup. These hosts are visible in the IP Work Group Host Table below. Hosts age out and become inactive in approximately 10 minutes if not rediscovered thrugh ARP.
                       nwIpWgIfNumKnownHosts 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.4 counter read-only
The number of hosts seen on this interface in this workgroup since this interface entry was last activated.
                       nwIpWgIfRowStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.5 integer read-write
This status instance supports `createAndGo' semantics to create an active entry. Enumeration: 'createAndWait': 5, 'notInService': 2, 'notReady': 3, 'createAndGo': 4, 'active': 1, 'destroy': 6.
                       nwIpWgIfOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.6 integer read-only
The operational status of this interface (port) entry. It will be `disabled' if this entry's row status is not active. It will be `workgroupInvalid' if either there is no workgroup defined for this entry's nwIpWgIfDefIdent or if the operational status for the workgroup in the definition table is not ok. It will be `addressConflict' if an entry in nwIpAddressTable is a conflict with the workgroup address of the definition. If there is no conflict and this entry's row status has just been activated, this operational status will be `resetRequired'. It will be `linkDown' if there are no physical connections on this interface and `routingDown' if routing or forwarding has been adminstratively disabled. If unspecified internal problems occur the status will be `internalError'. Enumeration: 'ok': 1, 'addressConflict': 4, 'internalError': 8, 'linkDown': 6, 'workgroupInvalid': 3, 'disabled': 2, 'routingDown': 7, 'resetRequired': 5.
               nwIpWgRngTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3 no-access
This table locks ranges of IP hosts (addresses) to ports. Entries in this table represent explicit permissions. The host(s) represented by a range entry may exchange packets with this router if it (they) match the port specified in the entry. Optionally physical address may be locked as well. This table functions in concert with the workgroup security level as defined in the IP Work Group Definition Table entry. For hosts not entered in this table the default for a low security workgroup is to permit packet exchange, whereas the default for medium and high security is to deny packet exchange.
                   nwIpWgRngEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1 no-access
Each entry configures a range of host IP addresses to be associated with a given interface ( port ). If the range consists of a single host address the entry may optionally specify a physical address. The entry is indexed by the range and the port. Ranges may not overlap. However a range may be duplicated on different ports. The address range must lie within the subnet defined for a given workgroup and thus the entry acquires the security level of that workgroup. If security is violated, packets to and from a given host IP address will be filtered out passing through the router. The source and destination IP packet addresses are checked against ranges in the range table during packet forwarding and must match as follows: For a high (4) security workgroup, a host must match a single host range entry - it must reside on the port with the physical address as configured in that entry. For a medium (3) security workgroup, a host must match a range entry in that it resides on that port, but unless a physical address is also specified in that entry, the physical address is not constrained. For a low (2) security workgroup, a host is free to reside on any port with any physical address as long as its IP address does not lie within the range of any entry in the range table, but if it does fall in a range then it must completely match that entry, or another entry with the duplicate range. Match completely means match the port and, if a physical address is specified, match that as well.
                       nwIpWgRngBegHostAddr 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.1 ipaddress read-only
The beginning (lower) IP address of the address range. This is the primary index into the IP Work Group Range Table.
                       nwIpWgRngEndHostAddr 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.2 ipaddress read-only
The ending (higher) IP address of the address range. This is the secondary index of the IP Work Group Range Table.
                       nwIpWgRngIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.3 integer read-only
The interface number. This is the tertiary index into the IP Work Group Interface Table, matching the primary index into the MIB-2 IfTable which describes the router port.
                       nwIpWgRngPhysAddr 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.4 octet string read-write
The physical address of the host with the IP address given in the nwIpWgRngBegHostAddr for this conceptual row entry. Only single host range entry in which nwIpWgRngEndHostAddr is the same as nwIpWgRngBegHostAddr may set a physical address.
                       nwIpWgRngRowStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.5 integer read-write
This status instance supports `createAndGo' semantics to create an active entry. Enumeration: 'createAndWait': 5, 'notInService': 2, 'notReady': 3, 'createAndGo': 4, 'active': 1, 'destroy': 6.
                       nwIpWgRngOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.6 integer read-only
The operational status of this range table entry. It will be `disabled' if this entry's row status is not active. It will be `workgroupInvalid' if either there is no workgroup or if the operational status for the workgroup in the definition table associated with this address range is not ok. It will be `interfaceInvalid' if this interface is not in the workgroup interface table or if operational status of the interface entry is not ok. It will be `physAddrRequired' if the security level of the associated workgroup is high and no physical address has been specified for this entry. Enumeration: 'ok': 1, 'interfaceInvalid': 4, 'internalError': 6, 'workgroupInvalid': 3, 'disabled': 2, 'physAddrRequired': 5.
               nwIpWgHostTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4 no-access
A read only status table for hosts in workgroups. It has the information similar to a net-to-media table.
                   nwIpWgHostEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1 no-access
Each entry shows a workgroup host. Entry is indexed by IP address and interface (port). It gives the workgroup and the physical address found for the host.
                       nwIpWgHostHostAddr 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.1 ipaddress read-only
The host IP address. This is the primary index to the IP Work Group Host Table.
                       nwIpWgHostIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.2 integer read-only
The interface (port) number. This is the secondary index to the IP Work Group Host Table, matching the primary index to the MIB-2 IfTable which describes the router port.
                       nwIpWgHostDefIdent 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.3 integer read-only
The workgroup identifier. This corresponds to the primary index into the IP Work Group Interface Table.
                       nwIpWgHostPhysAddr 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.4 octet string read-only
The physical address of the host with the IP address given in the nwIpWgHostHostAddr for this conceptual row entry.
                       nwIpWgHostStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.5 integer read-only
This status of the host with respect to the workgroup. The host may be `unknown' if ARP has not discovered on which port it resides. The status of `invalid-multiple' means the same host IP address was later found duplicated on another port. The status of `invalid-physaddr' means the host matched an entry in the IP Work Group Range Table with respect to range and port, but did not match that entry for physical address. If the workgroup was high security this status would result even if no physical address was given in the range entry. The status of `invalid-range' could either mean that, in a high or medium security workgroup, the host was not in the range of any entry in the IP WORK GROUP Range Table, or that it was not in the range of an entry with a matching port. The status of `invalid-interface' could mean the port was physically down or just not in service in the IP Work Group Interface Table. The status of `invalid-workgroup' could mean the workgroup does not exist or is not in service in the IP Work Group Definition Table. The status of `invalid-expired' means the host became inactive and aged out on the port on which it was learned. Enumeration: 'unknown': 2, 'invalid-multiple': 4, 'invalid-interface': 7, 'other': 1, 'invalid-range': 6, 'invalid-workgroup': 8, 'valid': 3, 'invalid-expired': 9, 'invalid-physaddr': 5.
         nwIpClientServices 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12