CORIANT-GROOVE-MIB: View SNMP OID List / Download MIB

SNMP MIB for Groove G30 release 2.1.0

The management object instance which the alarm or condition is reported against.

Identifies the current standing conditions which cause alarms and/or events.

Indicates if the alarm or event location is near end or far end.

Specifies the direction of an event/occurrence in the system, Ingress, Egress, NA.

Indicates the time-period increments during which PM data is collected.

Indicates if an alarm is service affecting or non-service affecting. NSA indicates non-service affecting. SA indicates service affecting.

Indicates the notification code (severity level) associated with the alarm type of service affecting.

Indicates the occurrence date and time of the alarm by the month of the year, the day of the month, hour of the day, the minute of the hour, and the second of the minute.

Describes the condition that caused the alarm.

Alarm condition types, for example, standing or transient. Enumeration: 'standing': 1, 'transient': 2.

Indicates the last severity level associated with the alarm type, which provides the info of alarm severity declared and cleared.

The description in alarm notification to provide additional information.

Indicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exactly same as MO. Entity type have smaller granularity referring to different service functions, e.g. 100GBase-R, 40GBase-R, 100GBase-R, ODU4, ODU2, ODU3, OTU4, OTUC2... Separate functions will have different entity types so that profile can be set differently for different service function which is more corresponding to user application.

Alarm profile defines the severity profile of alarm and event.

Entry of alarmProfileTable

alarm profile identifier which uniquely specify alarm profile. alarm profile 1 is supported firstly and applicable to all entities implicitly.

The list includes alarm/event entries of an alarm-profile.

Entry of alarmProfileENTRTable

Identifies the current standing conditions which cause conditions and/or events.

Indicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exactly same as MO. Entity type have smaller granularity referring to different service functions, e.g. 100GBase-R, 40GBase-R, 100GBase-R, ODU4, ODU2, ODU3, OTU4, OTUC2... Separate functions will have different entity types so that profile can be set differently for different service function which is more corresponding to user application.

Indicates the time-period increments during which PM data is collected.

Indicates the notification code (severity level) associated with the condition type of service affecting.

Indicates the notification code (severity level) associated with the condition type of non-service affecting.

The list includes active standing alarms.

Entry of standingConditionTable

The management object instance which the alarm or condition is reported against.

Identifies the current standing conditions which cause alarms and/or events.

Indicates if the alarm or event location is near end or far end.

Specifies the direction of an event/occurrence in the system, Ingress, Egress, NA.

Indicates the time-period increments during which PM data is collected.

Indicates if an alarm is service affecting or non-service affecting. NSA indicates non-service affecting. SA indicates service affecting.

Indicates the notification code (severity level) associated with the alarm type of service affecting.

Indicates the occurrence date and time of the alarm by the month of the year, the day of the month, hour of the day, the minute of the hour, and the second of the minute.

Describes the condition that caused the alarm.

Indicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exactly same as MO. Entity type have smaller granularity referring to different service functions, e.g. 100GBase-R, 40GBase-R, 100GBase-R, ODU4, ODU2, ODU3, OTU4, OTUC2... Separate functions will have different entity types so that profile can be set differently for different service function which is more corresponding to user application.

Network Element's system identification code. Note that this is unique identifier for each NE. default value :

Name assigned to this particular NE. A readable name for the NE. It can be used for NE. But not expected to be used by NM for unique NE identification The different function from ne-id is that user can keep ne-id unchanged, which uniquely identifies the NE, and update ne-name if necessary. default value :

Type of the NE default value :GROOVE_G30

Name of the location of this particular NE

Name or CLLI of the site where this NE is located

The altitude of the Network Element in meters UNITS:meters

Vendor name of this NE default value :Coriant

Ambient temperature sensed by the primary shelf for NE level

The attribute will enable/disable the alarm reporting for unknown pluggables present on the NE. default value :enabled

Current power consumption of the system.

Derived maximal power consumption around room temperature.

The attribute will enable/disable factory reset button function on the NE. default value :enabled

The baud rate of console port default value :9600 Enumeration: 't115200': 12, 't9600': 6, 't57600': 11, 't38400': 8, 't19200': 7.

NULL

Entry of shelfTable

Identifier of the shelf. It shall be an integer number and assigned implicitly by the system or setting through coder on the shelf.

Name of the location of this particular shelf.

shelf inlet temperature

shelf outlet temperature

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

NULL

Entry of slotTable

Identifier of the slot. It shall be an integer number and assigned implicitly by the system.

Equipment type for each slot/subslot according to the actually equipping. Needs to be re-defined in the project specific model. default value :empty

Defined all the equipment types which can be installed on the slot/subslot. This is a leaf list, encode by some leafs.

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

Card is a container carried by a slot.

Entry of cardTable

The attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model.

The attribute indicates an additional field to identify the module.

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. default value :unknown Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

The fan speed of percentage. Conditions:required-type = 'FAN'

The traffic switching type of card. Conditions:(required-type != 'FAN') and (required-type != 'PSU') default value :otn Enumeration: 'optical': 2, 'otn': 0, 'tdm': 1, 'packet': 3.

Temperature at the monitoring point.

Specify the card mode, e.g. normal or regen. default value :normal Enumeration: 'notApplicable': 0, 'regen': 2, 'normal': 1.

NULL

Entry of subslotTable

Identifier of the subslot.

Equipment type for each slot/subslot according to the actually equipping. Needs to be re-defined in the project specific model. default value :empty

Defined all the equipment types which can be installed on the slot/subslot. This is a leaf list, encode by some leafs.

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

Subcard is a container carried by a subslot.

Entry of subcardTable

The attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model.

The attribute indicates an additional field to identify the module.

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. default value :unknown Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

Temperature at the monitoring point.

NULL

Entry of portTable

The identifier is defined to uniquely identify the port.

Defined all the pluggable types which can be equipped on the port. Needs to be re-defined in the project specific model. This is a leaf list, encode by some leafs. Conditions:(port-type != 'optical') and (port-type != 'otdr') and (port-type != 'optical-nomon')

Pluggable type for each port according to the actually equipping. Needs to be re-defined in the project specific model. Conditions:port-type != 'optical' default value :empty

Received optical power

Transmitted optical power

Optical power of the selected channel on coherent receiver, which will be different from the rx-optical-power when multiple channels input simultaneously.

Received optical power of lane 1.

Received optical power of lane 2.

Received optical power of lane 3.

Received optical power of lane 4.

Transmitted optical power lane 1.

Transmitted optical power lane 2.

Transmitted optical power lane 3.

Transmitted optical power lane 4.

Supported direction of the optical port.

The name of the port. default value :unspecified

The type of port. Needs to be provided upon Port creation Enumeration: 'client': 1, 'opticalNomon': 6, 'clientSubport': 3, 'line': 2, 'otdr': 5, 'optical': 4.

The working mode of port. For client side: CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable. Default is 100GBE when card created. CHM2: applicable to port 3 to 11; possible values are: 40GBE, subport, not-applicable; applicable to subport 1 to 4; possible values are: 10GBE, not-applicable. Default is not-applicable. For Line side: CHM1/CHM2: possible values are: QPSK_100G, 16QAM_200G, 8QAM_300G. Default is 16QAM_200G. non applicable : there shall not be service created on the port or subport subport: the port shall create four subports under the port to support 4x10G. 40GBE: 40GBE service shall be created on the port with default mapping GMP. 10GBE: 10GBE service shall be created on the subport with default mapping BMP with fixed stuff. 100GBE: 100GBE service shall be created on the subport with default mapping GMP. QPSK_100G: 100G OTU4 service with DP-QPSK coherent modulation format shall be created on the port. 16QAM_200G: 200G OTUC2 service with DP-16QAM coherent modulation format shall be created on the port. 8QAM_300G: 300G OTUC3 service with DP-8QAM coherent modulation format shall be created on the coupled two line ports. Note 4x10G is to create subport managed objects under the port. Each subport can support a 10G service. Restrictions: Changing Port mode shall be allowed only if the impacted port or subport object is administratively down. Changing a 'subport' port mode of a port to be other value shall only be allowed only if port-modes of all the subports under the port are 'not-applicable'. If there is explicitly cross-connection is created associated with the ODU of the port, change port mode of the port shall be denied. If the port mode is a coupled port mode, e.g. 8QAM_300G, port mode can only be edited on the lower number of port within the coupled ports. The other port (or ports if more than two) will have read-only port mode value same as this lowest number port. When port/subport is set to admin down, laser will be shutdown, ingress side will insert proper maintenance signal. Conditions:(port-type != 'optical') and (port-type != 'otdr') and (port-type != 'optical-nomon') default value :not-applicable

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

Path/service name of cross-connection related facility.

Indicate neighbour port/facility entity to which the current port/facility is connected to.

The configurable mode of the Alarm Report Control (ARC). default value :nalm-qi Enumeration: 'nalmQi': 2, 'alm': 1, 'nalm': 3.

The current mode of the Alarm Report Control (ARC). Enumeration: 'nalmQi': 2, 'alm': 1, 'nalm': 3.

Additional information about the Alarm Report Control (ARC) when the main state is in the NALM-QI state default value :nalm-nr Enumeration: 'notApplicable': 0, 'nalmNr': 2, 'nalmCd': 1.

The holdoff timer value in minutes of the ARC. Range is 0 - 10080 minutes UNITS:minutes default value :1440

The remaining timer value (format: xxd-xxh:xxm:xxs) before the alarm is reported.

Indicates the port is connected externally or not. default value :no

NULL

Entry of subportTable

The identifier is defined to uniquely identify the subport.

The name of the port. default value :unspecified

The type of port. Needs to be provided upon Port creation Enumeration: 'client': 1, 'opticalNomon': 6, 'clientSubport': 3, 'line': 2, 'otdr': 5, 'optical': 4.

The working mode of port. For client side: CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable. Default is 100GBE when card created. CHM2: applicable to port 3 to 11; possible values are: 40GBE, subport, not-applicable; applicable to subport 1 to 4; possible values are: 10GBE, not-applicable. Default is not-applicable. For Line side: CHM1/CHM2: possible values are: QPSK_100G, 16QAM_200G, 8QAM_300G. Default is 16QAM_200G. non applicable : there shall not be service created on the port or subport subport: the port shall create four subports under the port to support 4x10G. 40GBE: 40GBE service shall be created on the port with default mapping GMP. 10GBE: 10GBE service shall be created on the subport with default mapping BMP with fixed stuff. 100GBE: 100GBE service shall be created on the subport with default mapping GMP. QPSK_100G: 100G OTU4 service with DP-QPSK coherent modulation format shall be created on the port. 16QAM_200G: 200G OTUC2 service with DP-16QAM coherent modulation format shall be created on the port. 8QAM_300G: 300G OTUC3 service with DP-8QAM coherent modulation format shall be created on the coupled two line ports. Note 4x10G is to create subport managed objects under the port. Each subport can support a 10G service. Restrictions: Changing Port mode shall be allowed only if the impacted port or subport object is administratively down. Changing a 'subport' port mode of a port to be other value shall only be allowed only if port-modes of all the subports under the port are 'not-applicable'. If there is explicitly cross-connection is created associated with the ODU of the port, change port mode of the port shall be denied. If the port mode is a coupled port mode, e.g. 8QAM_300G, port mode can only be edited on the lower number of port within the coupled ports. The other port (or ports if more than two) will have read-only port mode value same as this lowest number port. When port/subport is set to admin down, laser will be shutdown, ingress side will insert proper maintenance signal. Conditions:(port-type != 'optical') and (port-type != 'otdr') and (port-type != 'optical-nomon') default value :not-applicable

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

Path/service name of cross-connection related facility.

Indicate neighbour port/facility entity to which the current port/facility is connected to.

The configurable mode of the Alarm Report Control (ARC). default value :nalm-qi Enumeration: 'nalmQi': 2, 'alm': 1, 'nalm': 3.

The current mode of the Alarm Report Control (ARC). Enumeration: 'nalmQi': 2, 'alm': 1, 'nalm': 3.

Additional information about the Alarm Report Control (ARC) when the main state is in the NALM-QI state default value :nalm-nr Enumeration: 'notApplicable': 0, 'nalmNr': 2, 'nalmCd': 1.

The holdoff timer value in minutes of the ARC. Range is 0 - 10080 minutes UNITS:minutes default value :1440

The remaining timer value (format: xxd-xxh:xxm:xxs) before the alarm is reported.

Received optical power

Transmitted optical power

Indicates the port is connected externally or not. default value :no

Represents the Pluggable object

Entry of pluggableTable

The attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model.

Indicating the exact form factor of the pluggable. default value :Unrecognized

Indicating interface type of the pluggable. default value :

The type of laser frequency. Only tx-lo-independent type support och-os rx-frequency working Conditions:required-type = 'CFP2' default value :not-available Enumeration: 'txLoIndependent': 2, 'notAvailable': 3, 'txLoShared': 1.

The attribute Identifies the Hardware Version of the module that populates the slot.

Vendor information.

This is the value of serial number stored in EEPROM of the equipment.

Current Firmware (FW) version on the equipment.

Identifies the Part Number of the equipment.

Identifies the CLEI code number of the equipment. The CLEI code is a 10-character code that identifies communications equipment. It describes product type, features, source document, and associated drawings and vintages.

The attribute indicates an additional field to identify the module.

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. default value :unknown Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

Temperature at the monitoring point.

The list of optical amplifier on an equipment.

Entry of amplifierTable

User-defined name assigned to identify a specific amplifier in the device

Identifier of the supporting input port.

Identifier of the supporting output port.

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

Configuration for enable or disable the amplifier. default value :disabled

Enable or disable the function of automatic shutdown per input LOS. default value :enabled

Control mode of the amplifier. default value :auto Enumeration: 'auto': 2, 'manual': 1.

The operating mode of the amplifier default value :constant-gain Enumeration: 'constantGain': 2, 'constantPower': 1.

Type of the amplifier. default value :variable-gain-EDFA Enumeration: 'fixedGainEdfa': 1, 'variableGainEdfa': 2.

Setting gain to the amplifier for constant-gain mode in manual control mode.

Operating gain of the amplifier, which is the actually configured gain on the amplifier.

The value is used for adjustment of gain when the amplifier in automatic control mode, the automatically caculated gain will include offset of this attribute. default value :0.0

The minimum of settable gain.

The maximum of settable gain. UNITS:dB

Monitored aggregation signal output power. UNITS:dBm

Monitored aggregation total output power including both signal and ASE. UNITS:dBm

Monitored aggregation input power. UNITS:dBm

Configurable optical attenuation at output of the amplifier. default value :0.0

Monitored optical power after output VOA. UNITS:dBm

The list of optical tdc on an equipment.

Entry of tdcTable

User-defined name assigned to identify a specific tdc in the device

Identifier of the supporting input port.

Identifier of the supporting output port.

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

Control mode of the tunable dispersion compensation; Manual: CD value will be decided per configured CD value; Auto: system will automatically decide the CD value per measured chromatic dispersion in the span. default value :auto Enumeration: 'auto': 2, 'manual': 1.

Indicating the reference wavelength of the TDC. UNITS:MHz

Indicating the actual reference wavelength of the TDC. UNITS:MHz

The minimum of supported wavelength. UNITS:MHz

The maximum of supported wavelength. UNITS:MHz

The setting value of Chromatic Dispersion. UNITS:ps/nm default value :0

The value will be used to adjust target chromatic dispersion by adding the value with auto decided dispersion in auto tdc mode. UNITS:ps/nm

The actual value of Chromatic Dispersion. UNITS:ps/nm

The minimum of supported chromatic dispersion. UNITS:ps/nm

The maximum of supported chromatic dispersion. UNITS:ps/nm

NULL

Entry of inventoryTable

The equipment type that the inventory data refers to Enumeration: 'slot': 2, 'shelf': 1, 'subcard': 7, 'pluggable': 5, 'subslot': 6, 'port': 4, 'card': 3.

Identifier of the shelf.

Identifier of the slot.

Identifier of the subslot.

Identifier of the port.

The attribute Identifies the Hardware Version of the module that populates the slot.

This is the value of module type stored in EEPROM of the equipment.

Vendor information.

This is the value of serial number stored in EEPROM of the equipment.

Current Firmware (FW) version on the equipment.

Identifies the Part Number of the equipment.

Identifies the CLEI code number of the equipment. The CLEI code is a 10-character code that identifies communications equipment. It describes product type, features, source document, and associated drawings and vintages. CLEI codes have 4 data elements: - Characters 1 to 4: Define family or subfamily of product. - Characters 5 to 7: Define features. - Character 8: Manufacturer and System ID. - Characters 9 and 10: Identifies version, issue, and release #.

Indicating interface type of the pluggable. default value :

The equipment manufacture date get from equipment. format is mm/dd/yyyy. When there is no date information show nothing Conditions:(equipment-type = 'shelf') or (equipment-type = 'card') or (equipment-type = 'subcard') or (equipment-type = 'pluggable') default value :

This is the value of manufacturer number stored in EEPROM of the equipment.

Attributes related with LED Applicable to Shelf, FAN, PSU, CHM1, CHM2, CHM1G, OCC2 in DCI.

Entry of ledTable

The attribute indicates the equipment type to identify the module. for example, if the card is CHM1, 'CHM1' shall be used. DCI supporting LEDs: CHM1, CHM2, SHELF, FAN

Identifier of the shelf.

Identifier of the slot.

The functional name of LED. DCI NE: location_led port(n)_led (CHM1: n = 1 to 6, CHM2 n = 1 to 12, e.g. Port12) active_led power_led fault_led status_led subslot(n)_led

Current LED status. DCI NE: For Location_LED: OFF, BLINK For others: red, red-blink,green,green-blink,amber,amber-blink,off,notAvailable Enumeration: 'amber': 8, 'amberBlink': 9, 'off': 2, 'blink': 3, 'green': 6, 'greenBlink': 7, 'notAvailable': 1, 'redBlink': 5, 'red': 4.

Identifier of the subslot.

The detailed information of temperature in each monitoring-point of current module

Entry of temperatureDetailsTable

The point of temperature monitoring. It could be the sensor or chip internal.

Temperature at the monitoring point.

The lowest temperature threshold of this monitoring point in working mode.

The highest temperature threshold of this monitoring point in working mode.

Container of OTDR.

Entry of otdrTable

Indicating the current status of the OTDR. default value :not-available Enumeration: 'notAvailable': 0, 'measuring': 2, 'idle': 1, 'fail': 4, 'finished': 3.

Indicating the time remaining in current measurement running. UNITS:second default value :0

Error message produced when the measurement ends with error.

Indicating the current status of the OTDR laser. default value :not-available Enumeration: 'notAvailable': 0, 'disabled': 2, 'enabled': 1.

0 indicates that the card is not measuring any port; non-zero indicates the OTDR port number where a measurement is currently taking place. default value :0

Containing attributes of OTDR port.

Entry of otdrPortTable

OTDR measurement range. UNITS:km default value :auto

Indicates pulse width to be used in otdr measurement. UNITS:nano-second default value :auto

Indicating OTDR measurement speed. default value :auto Enumeration: 'auto': 6, 'medium': 3, 'slow': 4, 'precision': 5, 'fast': 1.

Specifies the group index of refraction (IOR) of the fiber to be measured. default value :auto

Indicating fiber type to be measured. default value :auto Enumeration: 'allwave': 5, 'ssmf': 1, 'leaf': 2, 'puresilica': 8, 'twc': 4, 'drakall': 12, 'unknown': 0, 'twplus': 13, 'twrs': 3, 'teralight': 11, 'pslc': 15, 'ls': 7, 'auto': 16, 'dsf': 6, 'twreach': 9, 'vistacor': 10, 'twminus': 14.

Indicates the last otdr measurement date and time on the port. default value :0000-00-00T00:00:00Z

Specifies the OTDR data sampling resolution. UNITS:meter default value :auto

The list of optical protection switch (ops) on an equipment.

Entry of opsTable

The name assigned to identify a specific ops in the device

Identifier of the working port of the OPS.

Identifier of the protection port of the OPS

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

Indicates the status of the protection switch. Enumeration: 'signalFailureOnProtection': 7, 'forceSwitchToWorking': 4, 'signalDegradeOnProtection': 9, 'forceSwitchToProtection': 3, 'noRequest': 11, 'waitToRestore': 12, 'lockoutOfProtection': 5, 'signalDegradeOnWorking': 8, 'notApplicable': 0, 'manualSwitchToWorking': 2, 'manualSwitchToProtection': 1, 'doNotRevert': 10, 'signalFailureOnWorking': 6.

Indicating the active port of the protection switch. default value :unknown Enumeration: 'unknown': 3, 'protection': 2, 'working': 1.

Revertive behavior of the aps. If True, then automatically revert after protection switch once the fault is restored. default value :no

Wait To Restore, valid values: 0-3600 seconds. A value of zero will switch back immediately, after expiration of the timer, the working is restored and a norequest state is transmitted. UNITS:second default value :300

The switching threshold of the working port which indicates the optical power threshold of signal degrade. default value :-18.0

The switching threshold of the protection port which indicates the optical power threshold of signal degrade. default value :-18.0

The switching threshold of the working port, power level below it will lead to loss of signal. default value :-23.0

The switching threshold of the protection port, power level below it will lead to loss of signal. default value :-23.0

The hold off time of the protection switch. UNITS:milliseconds default value :0

Specifies the band of the signal going through the optical protection switch unit. UNITS:nm default value :1550 Enumeration: 't1310': 2, 't1550': 1.

NULL

Entry of subportStatisticsTable

The start time of statistics monitor default value :0000-00-00T00:00:00.000Z

NULL

Entry of portStatisticsTable

The start time of statistics monitor default value :0000-00-00T00:00:00.000Z

NULL

Entry of subcardStatisticsTable

The start time of statistics monitor default value :0000-00-00T00:00:00.000Z

NULL

Entry of cardStatisticsTable

The start time of statistics monitor default value :0000-00-00T00:00:00.000Z

NULL

Entry of shelfStatisticsTable

The start time of statistics monitor default value :0000-00-00T00:00:00.000Z

Represents the 10GBE object.

Entry of eth10gTable

The FEC working type of etyn port. default value :auto

The FEC working state of etyn port. default value :disabled

Specifies the minimum transmit IPG value. default value :8

Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value :disabled

The mapping mode of client port packets into ODUk. default value :not-applicable Enumeration: 'bmpFixedstuff': 5, 't40gbmpOdu2e': 3, 'notApplicable': 0, 'bmp': 6, 'amp': 7, 'gfpF': 2, 'gmp': 1, 'preamble': 4.

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

The switching of client-shutdown. default value :no

The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0

The switching of near end ALS. default value :no

The switching of defect BERSD-ODU trig ALS default value :disabled

The enable switching of loopback function. default value :disabled

The type mode of loopback function default value :none Enumeration: 'terminal': 1, 'none': 0, 'facility': 2.

The type mode of test signal. default value :NONE

The enable switching of test signal function default value :NONE

Path/service name of cross-connection related facility.

Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. Note: txOnly and txAndRx modes are not supported. default value :disabled Enumeration: 'disabled': 4, 'notApplicable': 0, 'rxonly': 2.

The value of ODU2 upi in PREAMBLE mapping mode. default value :not-applicable Enumeration: 'notApplicable': 0, 'g709': 1, 'gsupp43': 2.

Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no

Test signal status for current facility.

Entry of testSignalFacilityStatusTable

The test result of PRBS Synchronization default value :not-applicable Enumeration: 'notApplicable': 0, 'outSync': 2, 'inSync': 1, 'errSync': 3.

The time duration of signal test UNITS:seconds

The counting of bit error by PRBS Synchronization

List of LLDP neighbors.

Entry of lldpRemoteSystemTable

This attribute represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system.

This attribute describes the source of a chassis identifier. The enumeration 'chassisComponent(1)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a chassis component (i.e., an entPhysicalClass value of 'chassis(3)'). The enumeration 'interfaceAlias(2)' represents a chassis identifier based on the value of ifAlias object (defined in IETF RFC 2863) for an interface on the containing chassis. The enumeration 'portComponent(3)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component (i.e., entPhysicalClass value of 'port(10)' or 'backplane(4)'), within the containing chassis. The enumeration 'macAddress(4)' represents a chassis identifier based on the value of a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001. The enumeration 'networkAddress(5)' represents a chassis identifier based on a network address, associated with a particular chassis. The encoded address is actually composed of two fields. The first field is a single octet, representing the IANA AddressFamilyNumbers value for the specific address type, and the second field is the network address value. The enumeration 'interfaceName(6)' represents a chassis identifier based on the value of ifName object (defined in IETF RFC 2863) for an interface on the containing chassis. The enumeration 'local(7)' represents a chassis identifier based on a locally defined value. Enumeration: 'macaddress': 4, 'networkaddress': 5, 'interfacename': 6, 'interfacealias': 2, 'chassiscomponent': 1, 'local': 7, 'portcomponent': 3.

This attribute describes the format of a chassis identifier string. Objects of this type are always used with an associated LldpChassisIdSubtype object, which identifies the format of the particular LldpChassisId object instance. If the associated LldpChassisIdSubtype object has a value of 'chassisComponent(1)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a chassis component (i.e., an entPhysicalClass value of 'chassis(3)'). If the associated LldpChassisIdSubtype object has a value of 'interfaceAlias(2)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863) for an interface on the containing chassis. If the particular ifAlias object does not contain any values, another chassis identifier type should be used. If the associated LldpChassisIdSubtype object has a value of 'portComponent(3)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component within the containing chassis. If the associated LldpChassisIdSubtype object has a value of 'macAddress(4)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001. If the associated LldpChassisIdSubtype object has a value of 'networkAddress(5)', then this string identifies a particular network address, encoded in network byte order, associated with one or more ports on the containing chassis. The first octet contains the IANA Address Family Numbers enumeration value for the specific address type, and octets 2 through N contain the network address value in network byte order. If the associated LldpChassisIdSubtype object has a value of 'interfaceName(6)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863) for an interface on the containing chassis. If the particular ifName object does not contain any values, another chassis identifier type should be used. If the associated LldpChassisIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned Chassis ID.

This attribute describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If the associated LldpPortIdSubtype object has a value of 'interfaceAlias(1)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863). If the particular ifAlias object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'portComponent(2)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component. If the associated LldpPortIdSubtype object has a value of 'macAddress(3)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with the port (IEEE Std 802-2001). If the associated LldpPortIdSubtype object has a value of 'networkAddress(4)', then this string identifies a network address associated with the port. The first octet contains the IANA AddressFamilyNumbers enumeration value for the specific address type, and octets 2 through N contain the networkAddress address value in network byte order. If the associated LldpPortIdSubtype object has a value of 'interfaceName(5)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863). If the particular ifName object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'agentCircuitId(6)', then this string identifies an agent-local identifier of the circuit (defined in RFC 3046). If the associated LldpPortIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned port ID. Enumeration: 'interfacealias': 1, 'networkaddress': 4, 'interfacename': 5, 'macaddress': 3, 'agentcircuitid': 6, 'local': 7, 'portcomponent': 2.

This attribute describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If the associated LldpPortIdSubtype object has a value of 'interfaceAlias(1)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863). If the particular ifAlias object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'portComponent(2)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component. If the associated LldpPortIdSubtype object has a value of 'macAddress(3)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with the port (IEEE Std 802-2001). If the associated LldpPortIdSubtype object has a value of 'networkAddress(4)', then this string identifies a network address associated with the port. The first octet contains the IANA AddressFamilyNumbers enumeration value for the specific address type, and octets 2 through N contain the networkAddress address value in network byte order. If the associated LldpPortIdSubtype object has a value of 'interfaceName(5)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863). If the particular ifName object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'agentCircuitId(6)', then this string identifies an agent-local identifier of the circuit (defined in RFC 3046). If the associated LldpPortIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned port ID.

The string value used to identify the description of the given port associated with the remote system.

The string value used to identify the system name of the remote system. sys-name: system name

The string value used to identify the system description of the remote system. sys-desc: system description

This attribute describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeater(1)' indicates that the system has repeater capability. The bit 'bridge(2)' indicates that the system has bridge capability. The bit 'wlanAccessPoint(3)' indicates that the system has WLAN access point capability. The bit 'router(4)' indicates that the system has router capability. The bit 'telephone(5)' indicates that the system has telephone capability. The bit 'docsisCableDevice(6)' indicates that the system has DOCSIS Cable Device capability (IETF RFC 2669 & 2670). The bit 'stationOnly(7)' indicates that the system has only station capability and nothing else. The bit 'cVLANComponent(8)' indicates that the system has C-VLAN component functionality. The bit 'sVLANComponent(9)' indicates that the system has S-VLAN component functionality. The bit 'twoPortMACRelay(10)' indicates that the system has Two-port MAC Relay (TPMR) functionality. sys-cap-supported: supported system capability

This attribute describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeater(1)' indicates that the system has repeater capability. The bit 'bridge(2)' indicates that the system has bridge capability. The bit 'wlanAccessPoint(3)' indicates that the system has WLAN access point capability. The bit 'router(4)' indicates that the system has router capability. The bit 'telephone(5)' indicates that the system has telephone capability. The bit 'docsisCableDevice(6)' indicates that the system has DOCSIS Cable Device capability (IETF RFC 2669 & 2670). The bit 'stationOnly(7)' indicates that the system has only station capability and nothing else. The bit 'cVLANComponent(8)' indicates that the system has C-VLAN component functionality. The bit 'sVLANComponent(9)' indicates that the system has S-VLAN component functionality. The bit 'twoPortMACRelay(10)' indicates that the system has Two-port MAC Relay (TPMR) functionality.

List of management addresses of LLDP neighbor. man:managment, remote management addresses

Entry of remoteManAddressesTable

The type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object.

The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management entity. man: management addr: address

This attribute describes the basis of a particular type of interface associated with the management address. The enumeration 'unknown(1)' represents the case where the interface is not known. The enumeration 'ifIndex(2)' represents interface identifier based on the ifIndex MIB object. The enumeration 'systemPortNumber(3)' represents interface identifier based on the system port numbering convention. man: management addr: address

The integer value used to identify the interface number regarding the management address component associated with the remote system. man: management addr: address

The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent. man: management addr: address oid: object identifier

NULL

Entry of oduTable

Level 1 ODU type

Identifier of level 1 ODU

Level 2 ODU type

Identifier of level 2 ODU

Level 3 ODU type

Identifier of level 3 ODU

Level 4 ODU type

Identifier of level 4 ODU

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

Path/service name of cross-connection related facility.

Tributary slots of ODU, range 1 to 80

Received payload-type of ODU

Transmitter payload-type of ODU

The enable switching of nim function default value :enabled

The enable switching of delay-measurement function default value :disabled

The actual opu configuration type default value :not-applicable Enumeration: 'notApplicable': 0, 'intact': 1, 'mux': 3, 'client': 2.

The ODUflex rate for special signal type default value :not-applicable Enumeration: 'notApplicable': 0, 'fc8g': 1, 'fc16g': 2.

The expected sapi(Source Access Point Identifier)

The expected dapi(Destination Access Point Identifier)

The expected operator TTI

The transmitter sapi(Source Access Point Identifier)

The transmitter dapi(Destination Access Point Identifier)

The transmitter operator TTI

The tim defect selection mode default value :NONE

The enable switching of inserting AIS by tim function default value :disabled

The received sapi(Source Access Point Identifier)

The received dapi(Destination Access Point Identifier)

The received operator TTI

The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7

The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1

The type mode of test signal. default value :NONE

The enable switching of test signal function default value :NONE

Termination mode for ODU. It works for trace label, nim , Delay Measurement and test signal function validation default value :terminated Enumeration: 'terminated': 0, 'nonTerminated': 1.

Encryption function for the ODU channel.

Entry of oduEncryptionTable

Setting AES-256 encryption on OTN default value :disabled Enumeration: 'disabled': 2, 'enabled': 1, 'enabledNonRevertive': 3.

Specifies the block cipher mode of operation. default value :CTR Enumeration: 'gcm': 2, 'ctr': 1.

The encryption key rotation interval (in minutes) UNITS:minutes default value :30

The encryption status at transmit side of the ODU, which reflects the status of both encryption data and communication sessions.

The encryption status at receive side of the ODU, which reflects the status of both encryption data and communication sessions.

Indicate the associated session for the ODU channel to synchronize keys. default value :none

Specify channel identifier of the encrypted ODU, which shall be unique within the NE.

The time left to rotate the ODU encryption key. UNITS:seconds default value :0

Test signal status on ODU

Entry of testSignalStatusTable

The test result of PRBS Synchronization default value :not-applicable Enumeration: 'notApplicable': 0, 'outSync': 2, 'inSync': 1, 'errSync': 3.

The time duration of signal test UNITS:seconds

The counting of bit error by PRBS Synchronization

Represents the 40GBE object.

Entry of eth40gTable

The FEC working type of etyn port. default value :auto

The FEC working state of etyn port. default value :disabled

Specifies the minimum transmit IPG value. default value :8

Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value :disabled

The mapping mode of client port packets into ODUk. default value :not-applicable Enumeration: 'bmpFixedstuff': 5, 't40gbmpOdu2e': 3, 'notApplicable': 0, 'bmp': 6, 'amp': 7, 'gfpF': 2, 'gmp': 1, 'preamble': 4.

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

The switching of client-shutdown. default value :no

The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0

The switching of near end ALS. default value :no

The switching of defect BERSD-ODU trig ALS default value :disabled

The enable switching of loopback function. default value :disabled

The type mode of loopback function default value :none Enumeration: 'terminal': 1, 'none': 0, 'facility': 2.

The type mode of test signal. default value :NONE

The enable switching of test signal function default value :NONE

Path/service name of cross-connection related facility.

Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. Note: txOnly and txAndRx modes are not supported. default value :disabled Enumeration: 'disabled': 4, 'notApplicable': 0, 'rxonly': 2.

Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no

Represents the 100GBE object.

Entry of eth100gTable

The FEC working type of etyn port. default value :auto

The FEC working state of etyn port. default value :disabled

Specifies the minimum transmit IPG value. default value :8

Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value :disabled

The mapping mode of client port packets into ODUk. default value :not-applicable Enumeration: 'bmpFixedstuff': 5, 't40gbmpOdu2e': 3, 'notApplicable': 0, 'bmp': 6, 'amp': 7, 'gfpF': 2, 'gmp': 1, 'preamble': 4.

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

The switching of client-shutdown. default value :no

The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0

The switching of near end ALS. default value :no

The switching of defect BERSD-ODU trig ALS default value :disabled

The enable switching of loopback function. default value :disabled

The type mode of loopback function default value :none Enumeration: 'terminal': 1, 'none': 0, 'facility': 2.

The type mode of test signal. default value :NONE

The enable switching of test signal function default value :NONE

Path/service name of cross-connection related facility.

Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. Note: txOnly and txAndRx modes are not supported. default value :disabled Enumeration: 'disabled': 4, 'notApplicable': 0, 'rxonly': 2.

Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no

Represents the otu4 object

Entry of otu4Table

The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

Path/service name of cross-connection related facility.

The expected sapi(Source Access Point Identifier)

The expected dapi(Destination Access Point Identifier)

The expected operator TTI

The transmitter sapi(Source Access Point Identifier)

The transmitter dapi(Destination Access Point Identifier)

The transmitter operator TTI

The tim defect selection mode default value :NONE

The enable switching of inserting AIS by tim function default value :disabled

The received sapi(Source Access Point Identifier)

The received dapi(Destination Access Point Identifier)

The received operator TTI

The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7

The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1

The enable switching of loopback function. default value :disabled

The type mode of loopback function default value :none Enumeration: 'terminal': 1, 'none': 0, 'facility': 2.

The switching of client-shutdown. default value :no

The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0

Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no

The switching of near end ALS. default value :no

The switching of defect BERSD-ODU trig ALS default value :disabled

Represents the otu2 object

Entry of otu2Table

The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

Path/service name of cross-connection related facility.

The expected sapi(Source Access Point Identifier)

The expected dapi(Destination Access Point Identifier)

The expected operator TTI

The transmitter sapi(Source Access Point Identifier)

The transmitter dapi(Destination Access Point Identifier)

The transmitter operator TTI

The tim defect selection mode default value :NONE

The enable switching of inserting AIS by tim function default value :disabled

The received sapi(Source Access Point Identifier)

The received dapi(Destination Access Point Identifier)

The received operator TTI

The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7

The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1

The enable switching of loopback function. default value :disabled

The type mode of loopback function default value :none Enumeration: 'terminal': 1, 'none': 0, 'facility': 2.

Represents the otu2e object

Entry of otu2eTable

The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

Path/service name of cross-connection related facility.

The expected sapi(Source Access Point Identifier)

The expected dapi(Destination Access Point Identifier)

The expected operator TTI

The transmitter sapi(Source Access Point Identifier)

The transmitter dapi(Destination Access Point Identifier)

The transmitter operator TTI

The tim defect selection mode default value :NONE

The enable switching of inserting AIS by tim function default value :disabled

The received sapi(Source Access Point Identifier)

The received dapi(Destination Access Point Identifier)

The received operator TTI

The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7

The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1

The enable switching of loopback function. default value :disabled

The type mode of loopback function default value :none Enumeration: 'terminal': 1, 'none': 0, 'facility': 2.

Represents the FC8G object.

Entry of fc8gTable

The mapping mode of client port packets into ODUk. default value :not-applicable Enumeration: 'bmpFixedstuff': 5, 't40gbmpOdu2e': 3, 'notApplicable': 0, 'bmp': 6, 'amp': 7, 'gfpF': 2, 'gmp': 1, 'preamble': 4.

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

The switching of client-shutdown. default value :no

The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0

The switching of near end ALS. default value :no

The switching of defect BERSD-ODU trig ALS default value :disabled

The enable switching of loopback function. default value :disabled

The type mode of loopback function default value :none Enumeration: 'terminal': 1, 'none': 0, 'facility': 2.

The type mode of test signal. default value :NONE

The enable switching of test signal function default value :NONE

Path/service name of cross-connection related facility.

Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no

Represents the FC16G object.

Entry of fc16gTable

The mapping mode of client port packets into ODUk. default value :not-applicable Enumeration: 'bmpFixedstuff': 5, 't40gbmpOdu2e': 3, 'notApplicable': 0, 'bmp': 6, 'amp': 7, 'gfpF': 2, 'gmp': 1, 'preamble': 4.

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

The switching of client-shutdown. default value :no

The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0

The switching of near end ALS. default value :no

The switching of defect BERSD-ODU trig ALS default value :disabled

The enable switching of loopback function. default value :disabled

The type mode of loopback function default value :none Enumeration: 'terminal': 1, 'none': 0, 'facility': 2.

The type mode of test signal. default value :NONE

The enable switching of test signal function default value :NONE

Path/service name of cross-connection related facility.

Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no

Represents the OC192 object.

Entry of oc192Table

The mapping mode of client port packets into ODUk. default value :not-applicable Enumeration: 'bmpFixedstuff': 5, 't40gbmpOdu2e': 3, 'notApplicable': 0, 'bmp': 6, 'amp': 7, 'gfpF': 2, 'gmp': 1, 'preamble': 4.

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

The switching of client-shutdown. default value :no

The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0

The switching of near end ALS. default value :no

The switching of defect BERSD-ODU trig ALS default value :disabled

The enable switching of loopback function. default value :disabled

The type mode of loopback function default value :none Enumeration: 'terminal': 1, 'none': 0, 'facility': 2.

The type mode of test signal. default value :NONE

The enable switching of test signal function default value :NONE

Path/service name of cross-connection related facility.

The expected trc(trail trace identification)

The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'

The received trc(trail trace identification)

The enable switching of inserting AIS by tim function default value :disabled

The enable switching of tim defect monitor mode default value :disabled

NULL default value :Generic-AIS Enumeration: 'msAis': 1, 'genericAis': 0, 'aisL': 2.

Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no

Represents the STM64 object.

Entry of stm64Table

The mapping mode of client port packets into ODUk. default value :not-applicable Enumeration: 'bmpFixedstuff': 5, 't40gbmpOdu2e': 3, 'notApplicable': 0, 'bmp': 6, 'amp': 7, 'gfpF': 2, 'gmp': 1, 'preamble': 4.

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

The switching of client-shutdown. default value :no

The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0

The switching of near end ALS. default value :no

The switching of defect BERSD-ODU trig ALS default value :disabled

The enable switching of loopback function. default value :disabled

The type mode of loopback function default value :none Enumeration: 'terminal': 1, 'none': 0, 'facility': 2.

The type mode of test signal. default value :NONE

The enable switching of test signal function default value :NONE

Path/service name of cross-connection related facility.

The expected trc(trail trace identification)

The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'

The received trc(trail trace identification)

The enable switching of inserting AIS by tim function default value :disabled

The enable switching of tim defect monitor mode default value :disabled

NULL default value :Generic-AIS Enumeration: 'msAis': 1, 'genericAis': 0, 'aisL': 2.

Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no

Represents the otuc2 object

Entry of otuc2Table

The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

Path/service name of cross-connection related facility.

The expected sapi(Source Access Point Identifier)

The expected dapi(Destination Access Point Identifier)

The expected operator TTI

The transmitter sapi(Source Access Point Identifier)

The transmitter dapi(Destination Access Point Identifier)

The transmitter operator TTI

The tim defect selection mode default value :NONE

The enable switching of inserting AIS by tim function default value :disabled

The received sapi(Source Access Point Identifier)

The received dapi(Destination Access Point Identifier)

The received operator TTI

The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7

The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1

Represents the otuc3 object

Entry of otuc3Table

The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

Path/service name of cross-connection related facility.

The expected sapi(Source Access Point Identifier)

The expected dapi(Destination Access Point Identifier)

The expected operator TTI

The transmitter sapi(Source Access Point Identifier)

The transmitter dapi(Destination Access Point Identifier)

The transmitter operator TTI

The tim defect selection mode default value :NONE

The enable switching of inserting AIS by tim function default value :disabled

The received sapi(Source Access Point Identifier)

The received dapi(Destination Access Point Identifier)

The received operator TTI

The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7

The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1

Represents the och-os MO

Entry of ochOsTable

Currently och-os modulation format Enumeration: 'dpQpsk': 1, 'dp8qam': 3, 'dp16qam': 2, 'nrz': 6, 'notApplicable': 0.

Currently line-encoding mode Enumeration: 'nonDifferential': 1, 'differential': 2.

The laser frequency. For tx-lo-independent laser-type, it set the tx laser frequency only. UNITS:MHz default value :0

The actual laser frequency. If rx-frequency is 0, it reflects both Rx and Tx frequency for coherent interface. UNITS:MHz default value :0

The rx laser frequency. Special for 0 means it is same as tx laser frequency. Conditions:possible-pluggable-types != 'SFP+' UNITS:MHz default value :0

The actual rx laser frequency for coherent interface with separating Lo laser from Tx. 0 means Lo and Tx share the same laser where 'frequency' attriute will indicate both Tx and Rx. Conditions:possible-pluggable-types != 'SFP+' UNITS:MHz default value :0

The enable switching of output laser. default value :disabled

This is to support adjustable optical power of Line side. default value :1.0

This is the actual transmitting optical power of Line side. default value :-99.0

The FEC type of och-os default value :SDFEC25

This is to support configurable optical attenuation at receiver side which is based on the hardware capability on the port. default value :0.0

Transmitter filter roll off factor. default value :0.2

Preemphasis of transmitted signal. default value :enabled

Preemphasis of transmitted signal. default value :1.0

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

The enable switching of loopback function. default value :disabled

The type mode of loopback function default value :none Enumeration: 'terminal': 1, 'none': 0, 'facility': 2.

Path/service name of cross-connection related facility.

Value of Differential Group Delay UNITS:ps

Value of Chromatic Dispersion UNITS:ps/nm

Current value of OSNR. The result could be OSNR value with dB

Current value of Q-factor

Current value of PreFEC Bit Error Ratio. default value :-99.0

low value of chromatic dispersion search range. UNITS:ps/nm default value :-45000

high value of chromatic dispersion search range. UNITS:ps/nm default value :45000

When the attribute value is set to yes, the transmit laser will be shutdown if the whole service of the direction has signal failure, the function mainly used in regeneration node to propagate signal failure as LOS. default value :no

Specify if enable fast SOP (state of polarization) change tracking; if enabled, the interface will tolerate very fast SOP and transient. default value :disabled

Represents the 10GWAN_SONET object.

Entry of wan10gSonetTable

The mapping mode of client port packets into ODUk. default value :not-applicable Enumeration: 'bmpFixedstuff': 5, 't40gbmpOdu2e': 3, 'notApplicable': 0, 'bmp': 6, 'amp': 7, 'gfpF': 2, 'gmp': 1, 'preamble': 4.

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

The switching of client-shutdown. default value :no

The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0

Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no

The switching of near end ALS. default value :no

The switching of defect BERSD-ODU trig ALS default value :disabled

The enable switching of loopback function. default value :disabled

The type mode of loopback function default value :none Enumeration: 'terminal': 1, 'none': 0, 'facility': 2.

The type mode of test signal. default value :NONE

The enable switching of test signal function default value :NONE

Path/service name of cross-connection related facility.

The expected trc(trail trace identification)

The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'

The received trc(trail trace identification)

The enable switching of inserting AIS by tim function default value :disabled

The enable switching of tim defect monitor mode default value :disabled

NULL default value :Generic-AIS Enumeration: 'msAis': 1, 'genericAis': 0, 'aisL': 2.

Represents the 10GWAN_SDH object.

Entry of wan10gSdhTable

The mapping mode of client port packets into ODUk. default value :not-applicable Enumeration: 'bmpFixedstuff': 5, 't40gbmpOdu2e': 3, 'notApplicable': 0, 'bmp': 6, 'amp': 7, 'gfpF': 2, 'gmp': 1, 'preamble': 4.

The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up Enumeration: 'down': 2, 'up': 1.

The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up Enumeration: 'down': 2, 'up': 1.

Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. Bits: 'unknown': 14, 'measuring': 17, 'none': 0, 'busy': 8, 'lowerLayerDown': 3, 'laserSafetyShutoff': 16, 'firmwareLoading': 18, 'loopback': 11, 'softwareUpgrade': 12, 'mismatch': 2, 'hibernation': 9, 'inTest': 10, 'failed': 1, 'idle': 7, 'connected': 19, 'shutdown': 5, 'initializing': 13, 'notPresent': 4, 'degraded': 6, 'incomplete': 15.

User defined alias for this entity. Must be an alphanumeric string with dash or underscore

The switching of client-shutdown. default value :no

The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0

Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no

The switching of near end ALS. default value :no

The switching of defect BERSD-ODU trig ALS default value :disabled

The enable switching of loopback function. default value :disabled

The type mode of loopback function default value :none Enumeration: 'terminal': 1, 'none': 0, 'facility': 2.

The type mode of test signal. default value :NONE

The enable switching of test signal function default value :NONE

Path/service name of cross-connection related facility.

The expected trc(trail trace identification)

The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'

The received trc(trail trace identification)

The enable switching of inserting AIS by tim function default value :disabled

The enable switching of tim defect monitor mode default value :disabled

NULL default value :Generic-AIS Enumeration: 'msAis': 1, 'genericAis': 0, 'aisL': 2.

NULL

Entry of eth10gStatisticsTable

The start time of statistics monitor default value :0000-00-00T00:00:00.000Z

the statistics seconds counting for signal loss UNITS:seconds

the statistics bits counting for error bit forward error correction UNITS:bits

the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks

the statistics Times counting for input signal symbol errors UNITS:Events

the statistics counting for input signal drop events UNITS:events

the statistics counting for input signal octets UNITS:octets

the statistics counting for input signal packets UNITS:packets

the statistics counting for input broadcast packets UNITS:packets

the statistics counting for input multicast packets UNITS:packets

the statistics counting for input CRC error packets UNITS:packets

the statistics counting for input undersize packets UNITS:packets

the statistics counting for input oversize packets UNITS:packets

the statistics counting for input fragment packets UNITS:packets

the statistics counting for input jabber packets UNITS:packets

the statistics counting for input 64 octets packets UNITS:packets

the statistics counting for input 65 to 127 octets packets UNITS:packets

the statistics counting for input 128 to 255 octets packets UNITS:packets

the statistics counting for input 256 to 511 octets packets UNITS:packets

the statistics counting for input 512 to 1023 octets packets UNITS:packets

the statistics counting for input 1024 to 1518 octets packets UNITS:packets

the statistics Times counting for output signal symbol errors UNITS:Events

the statistics counting for output signal drop events UNITS:events

the statistics counting for output signal octets UNITS:octets

the statistics counting for output signal packets UNITS:packets

the statistics counting for output broadcast packets UNITS:packets

the statistics counting for output multicast packets UNITS:packets

the statistics counting for output CRC error packets UNITS:packets

the statistics counting for output undersize packets UNITS:packets

the statistics counting for output oversize packets UNITS:packets

the statistics counting for output fragment packets UNITS:packets

the statistics counting for output jabber packets UNITS:packets

the statistics counting for output 64 octets packets UNITS:packets

the statistics counting for output 65 to 127 octets packets UNITS:packets

the statistics counting for output 128 to 255 octets packets UNITS:packets

the statistics counting for output 256 to 511 octets packets UNITS:packets

the statistics counting for output 512 to 1023 octets packets UNITS:packets