CMC-MIB: View SNMP OID List / Download MIB

VENDOR: CMC


 Home MIB: CMC-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cmc 1.3.6.1.4.1.44
       cmc_prod 1.3.6.1.4.1.44.1
           cmc_adapt 1.3.6.1.4.1.44.1.1
           cmc_system 1.3.6.1.4.1.44.1.2
           cmc_soft 1.3.6.1.4.1.44.1.3
       cmc_mgmt 1.3.6.1.4.1.44.2
           cmc_mib 1.3.6.1.4.1.44.2.1
               cmc_ip 1.3.6.1.4.1.44.2.1.4
                   cmcIpInAdminDiscards 1.3.6.1.4.1.44.2.1.4.1 counter read-only
The number of incoming datagrams dropped due to administrative prohibitions.
                   cmcIpOutAdminDiscards 1.3.6.1.4.1.44.2.1.4.3 counter read-only
The number of outgoing datagrams dropped due to administrative prohibitions.
                   cmcIpFiltStatus 1.3.6.1.4.1.44.2.1.4.4 integer read-write
The status of IP Filtering. Enumeration: 'disabled': 1, 'enabled': 2.
                   cmcIpFilterTable 1.3.6.1.4.1.44.2.1.4.5 no-access
A list of IP Filter table entries.
                       cmcIpFiltEntry 1.3.6.1.4.1.44.2.1.4.5.1 no-access
An IP Filter table entry containing objects that describe datagram transmission/reception restrictions. Creation of an IP Filter table entry requires the presence of the cmcIpFiltName and cmcIpFiltMode objects along with at least one of the following objects: cmcIpFiltSAddr cmcIpFiltSPort cmcIpFiltDAddr cmcIpFiltDPort cmcIpFiltProto cmcIpFiltIfIndex
                           cmcIpFiltName 1.3.6.1.4.1.44.2.1.4.5.1.1 octet string read-write
Name of filter entry. This is an ASCII string up to 6 octets long.
                           cmcIpFiltPriority 1.3.6.1.4.1.44.2.1.4.5.1.2 integer read-only
The priority of the entry. The highest priority entry (1) is searched first. The second highest priority entry (2) is searched next, and so on.
                           cmcIpFiltSAddr 1.3.6.1.4.1.44.2.1.4.5.1.3 ipaddress read-write
Source IP address for the filter entry
                           cmcIpFiltSMask 1.3.6.1.4.1.44.2.1.4.5.1.4 ipaddress read-write
Source IP mask for the filter entry.
                           cmcIpFiltSPort 1.3.6.1.4.1.44.2.1.4.5.1.5 integer read-write
Source port for the filter entry.
                           cmcIpFiltDAddr 1.3.6.1.4.1.44.2.1.4.5.1.6 ipaddress read-write
Destination IP address for the filter entry.
                           cmcIpFiltDMask 1.3.6.1.4.1.44.2.1.4.5.1.7 ipaddress read-write
Destination IP mask for the filter entry.
                           cmcIpFiltDPort 1.3.6.1.4.1.44.2.1.4.5.1.8 integer read-write
Destination port for the filter entry.
                           cmcIpFiltProto 1.3.6.1.4.1.44.2.1.4.5.1.9 integer read-write
Protocol to filter.
                           cmcIpFiltMode 1.3.6.1.4.1.44.2.1.4.5.1.10 integer read-write
Mode of the filter entry. Enumeration: 'nodial': 3, 'deny': 2, 'allow': 1.
                           cmcIpFiltErrMsg 1.3.6.1.4.1.44.2.1.4.5.1.11 integer read-write
Configuration object used to control the transmission of ICMP error messages when datagrams are administratively filtered. Enumeration: 'enable': 1, 'disable': 2.
                           cmcIpFiltType 1.3.6.1.4.1.44.2.1.4.5.1.12 integer read-write
The type of the IP Filter Table entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the cmcIpFilterTable. The invalid(2) value is not supported for row creates. The netmgt(3) value is the default value for row creates. Enumeration: 'local': 1, 'netmgmt': 3, 'invalid': 2.
                           cmcIpFiltMoveOper 1.3.6.1.4.1.44.2.1.4.5.1.13 octet string read-write
Configuration object used to move IP Filter table entries (to obtain a different priority for the entry). Parameters are defined as: Octet 0 describes the move operation [1, 2] = [Before, After] Octets 1 - 6 contain an existing IP Filter Entry name.
                           cmcIpFiltUseCount 1.3.6.1.4.1.44.2.1.4.5.1.14 integer read-write
The number of times the IP Filter Table entry has been referenced.
                           cmcIpFiltDirection 1.3.6.1.4.1.44.2.1.4.5.1.15 integer read-write
The flow direction for the filter entry. Enumeration: 'both': 1, 'outgoing': 3, 'incoming': 2.
                           cmcIpFiltIfIndex 1.3.6.1.4.1.44.2.1.4.5.1.16 integer read-write
The interface index associated with the filter entry. This value is equivalent to the ifIndex object.
               cmc_ipx 1.3.6.1.4.1.44.2.1.5
                   cmc_ipx_ipx 1.3.6.1.4.1.44.2.1.5.1
                       cmc_ipx_ipxSystem 1.3.6.1.4.1.44.2.1.5.1.1
                           ipxSysTable 1.3.6.1.4.1.44.2.1.5.1.1.1 no-access
The IPX System table.
                               ipxSysEntry 1.3.6.1.4.1.44.2.1.5.1.1.1.1 no-access
Each entry corresponds to one instance of IPX running on the system.
                                   ipxSysInstance 1.3.6.1.4.1.44.2.1.5.1.1.1.1.1 integer read-write
The unique identifier of the instance of IPX to which this row corresponds. The value may be written only when creating a new entry in the table.
                                   ipxSysExistState 1.3.6.1.4.1.44.2.1.5.1.1.1.1.2 integer read-write
The validity of this entry in the IPX system table. Setting this field to off indicates that this entry may be deleted from the system table at the IPX implementation's discretion. Enumeration: 'on': 2, 'off': 1.
                                   ipxSysIntNetNumExists 1.3.6.1.4.1.44.2.1.5.1.1.1.1.3 integer read-only
Indicates whether this instance of IPX has an internal network number. Enumeration: 'yes': 2, 'no': 1.
                                   ipxSysIntNetNum 1.3.6.1.4.1.44.2.1.5.1.1.1.1.4 netnumber read-write
The IPX internal network number of this instance of IPX. This value is undefined if the value of ipxSysIntNetNumExists is no.
                                   ipxSysName 1.3.6.1.4.1.44.2.1.5.1.1.1.1.5 octet string read-write
The readable name for this system.
                                   ipxSysMaxPathSplits 1.3.6.1.4.1.44.2.1.5.1.1.1.1.6 integer read-write
The maximum number of path with equal routing metric value which this instance of IPX may split between when forwarding packets.
                                   ipxSysMaxHops 1.3.6.1.4.1.44.2.1.5.1.1.1.1.7 integer read-write
The maximum number of hops a packet may take.
                                   ipxSysVersionMajor 1.3.6.1.4.1.44.2.1.5.1.1.1.1.8 integer read-only
The major version number of IPX supported.
                                   ipxSysVersionMinor 1.3.6.1.4.1.44.2.1.5.1.1.1.1.9 integer read-only
The minor version number of IPX supported.
                                   ipxSysInReceives 1.3.6.1.4.1.44.2.1.5.1.1.1.1.10 counter read-only
The total number of IPX packets received, including those received in error.
                                   ipxSysInTooManyHops 1.3.6.1.4.1.44.2.1.5.1.1.1.1.11 counter read-only
The number of IPX packets discarded due to exceeding the maximum hop count.
                                   ipxSysInHdrErrors 1.3.6.1.4.1.44.2.1.5.1.1.1.1.12 counter read-only
The number of IPX packets discarded due to errors in their headers, including any IPX packet with a size less than the minimum of 30 bytes.
                                   ipxSysInUnknownSockets 1.3.6.1.4.1.44.2.1.5.1.1.1.1.13 counter read-only
The number of IPX packets discarded because the destination socket was not open.
                                   ipxSysInFiltered 1.3.6.1.4.1.44.2.1.5.1.1.1.1.14 counter read-only
The number of incoming IPX packets discarded due to filtering.
                                   ipxSysInCompressDiscards 1.3.6.1.4.1.44.2.1.5.1.1.1.1.15 counter read-only
The number of incoming IPX packets discarded due to decompression errors.
                                   ipxSysInDiscards 1.3.6.1.4.1.44.2.1.5.1.1.1.1.16 counter read-only
The number of IPX packets received but discarded die to processing decision.
                                   ipxSysInDelivers 1.3.6.1.4.1.44.2.1.5.1.1.1.1.17 counter read-only
The total number of IPX packets delivered locally, including packets from local applications.
                                   ipxSysNETBIOSPackets 1.3.6.1.4.1.44.2.1.5.1.1.1.1.18 counter read-only
Number of NETBIOS packets.
                                   ipxSysForwPackets 1.3.6.1.4.1.44.2.1.5.1.1.1.1.19 counter read-only
The number of IPX packets forwarded.
                                   ipxSysOutRequests 1.3.6.1.4.1.44.2.1.5.1.1.1.1.20 counter read-only
The number of IPX packets supplied locally for transmission, not including any packets counted in ipxForwPackets.
                                   ipxSysOutNoRoutes 1.3.6.1.4.1.44.2.1.5.1.1.1.1.21 counter read-only
The number of outgoing IPX packets discarded because no route was found.
                                   ipxSysOutFiltered 1.3.6.1.4.1.44.2.1.5.1.1.1.1.22 counter read-only
The number of outgoing IPX packets discarded due to filtering.
                                   ipxSysOutCompressDiscards 1.3.6.1.4.1.44.2.1.5.1.1.1.1.23 counter read-only
The number of outgoing IPX packets discarded due to compression errors.
                                   ipxSysOutMalformedRequests 1.3.6.1.4.1.44.2.1.5.1.1.1.1.24 counter read-only
The number of IPX packets supplied locally contained errors in their structure.
                                   ipxSysOutDiscards 1.3.6.1.4.1.44.2.1.5.1.1.1.1.25 counter read-only
The number of outgoing IPX packets discarded due to processing decision.
                                   ipxSysOutPackets 1.3.6.1.4.1.44.2.1.5.1.1.1.1.26 counter read-only
The total number of IPX packets transmitted.
                                   ipxSysCircCount 1.3.6.1.4.1.44.2.1.5.1.1.1.1.27 counter read-only
The number of circuits known to this instance of IPX.
                                   ipxSysDestCount 1.3.6.1.4.1.44.2.1.5.1.1.1.1.28 counter read-only
The number of currently reachable destinations known to this instance of IPX.
                                   ipxSysServCount 1.3.6.1.4.1.44.2.1.5.1.1.1.1.29 counter read-only
The number of services known to this instance of IPX.
                                   ipxSysResourceFailures 1.3.6.1.4.1.44.2.1.5.1.1.1.1.30 counter read-only
The number of times this instance of IPX has been unable to obtain needed resources (memory, etc.).
                                   ipxSysConfigSockets 1.3.6.1.4.1.44.2.1.5.1.1.1.1.31 counter read-only
The configured maximum number of sockets that may be opened at one time.
                                   ipxSysMaxOpenSockets 1.3.6.1.4.1.44.2.1.5.1.1.1.1.32 counter read-only
The maximum number of IPX sockets actually open at one time by this system.
                                   ipxSysOpenSocketFails 1.3.6.1.4.1.44.2.1.5.1.1.1.1.33 counter read-only
The number of IPX soclet open calls which failed.
                       cmc_ipx_ipxCircuit 1.3.6.1.4.1.44.2.1.5.1.2
                           ipxCircTable 1.3.6.1.4.1.44.2.1.5.1.2.1 no-access
The Circuit Table.
                               ipxCircEntry 1.3.6.1.4.1.44.2.1.5.1.2.1.1 no-access
Each entry corresponds to one circuit known to the system.
                                   ipxCircSysInstance 1.3.6.1.4.1.44.2.1.5.1.2.1.1.1 integer read-write
The unique identifier of the instance of IPX to which this entry corresponds. This value may be written only when creating a new entry in the table.
                                   ipxCircIndex 1.3.6.1.4.1.44.2.1.5.1.2.1.1.2 integer read-write
The identifier of ths circuit, unique within the instance of IPX. This value may be written only when creating a new table entry.
                                   ipxCircExistState 1.3.6.1.4.1.44.2.1.5.1.2.1.1.3 integer read-write
The validity of this circuit entry. A circuit with this value set to off may be deleted from the table at the IPX implementation's discretion. Enumeration: 'on': 2, 'off': 1.
                                   ipxCircOperState 1.3.6.1.4.1.44.2.1.5.1.2.1.1.4 integer read-write
The operational state of the circuit. Enumeration: 'on': 2, 'off': 1.
                                   ipxCircIfIndex 1.3.6.1.4.1.44.2.1.5.1.2.1.1.5 integer read-write
The value of IfIndex for the interface used by this circuit. This value may be written only when creating a new entry in the table.
                                   ipxCircName 1.3.6.1.4.1.44.2.1.5.1.2.1.1.6 octet string read-write
The readable name for the circuit.
                                   ipxCircInfo 1.3.6.1.4.1.44.2.1.5.1.2.1.1.7 octet string read-write
Additional readable information for the circuit. The content of this field is implementation defined.
                                   ipxCircType 1.3.6.1.4.1.44.2.1.5.1.2.1.1.8 integer read-write
The type of the circuit. Enumeration: 'unnumberedRIP': 5, 'wanWS': 7, 'wanRIP': 4, 'dynamic': 6, 'broadcast': 2, 'other': 1, 'ptTopt': 3.
                                   ipxCircLocalMaxPacketSize 1.3.6.1.4.1.44.2.1.5.1.2.1.1.9 integer read-write
The maximum size (including header), in bytes, that the system supports locally in this circuit.
                                   ipxCircCompressState 1.3.6.1.4.1.44.2.1.5.1.2.1.1.10 integer read-write
The compression state on the circuit. This value may be written only when creating a new entry in the table. Enumeration: 'on': 2, 'off': 1.
                                   ipxCircCompressSlots 1.3.6.1.4.1.44.2.1.5.1.2.1.1.11 integer read-write
The number of compression slots available on this circuit. This value may be written only when creating a new entry in the table.
                                   ipxCircCompressedSent 1.3.6.1.4.1.44.2.1.5.1.2.1.1.12 counter read-only
The number of compressed packets sent.
                                   ipxCircUncompressedSent 1.3.6.1.4.1.44.2.1.5.1.2.1.1.13 counter read-only
The number of packets sent without being compressed even though compression was turned on for this circuit.
                                   ipxCircMediaType 1.3.6.1.4.1.44.2.1.5.1.2.1.1.14 octet string read-only
The media type used on this circuit.
                                   ipxCircNetNumber 1.3.6.1.4.1.44.2.1.5.1.2.1.1.15 netnumber read-only
The IPX network number to which this circuit is bound.
                                   ipxCircStateChanges 1.3.6.1.4.1.44.2.1.5.1.2.1.1.16 counter read-only
The number of times the circuit has changed state.
                                   ipxCircInitFails 1.3.6.1.4.1.44.2.1.5.1.2.1.1.17 counter read-only
The number of times that initialization of this circuit has failed.
                                   ipxCircDelay 1.3.6.1.4.1.44.2.1.5.1.2.1.1.18 integer read-only
The period of time, in milliseconds, that it takes to transmit one byte of data, excluding protocol headers, to a destination on the other end of the circuit, if the circuit is free of other traffic.
                                   ipxCircThroughput 1.3.6.1.4.1.44.2.1.5.1.2.1.1.19 integer read-only
The amount of data, in bits per second, that may flow through the circuit if there is no other traffic.
                       cmc_ipx_ipxForwarding 1.3.6.1.4.1.44.2.1.5.1.3
                           ipxDestTable 1.3.6.1.4.1.44.2.1.5.1.3.1 no-access
The Destination Table contains information about all known destinations.
                               ipxDestEntry 1.3.6.1.4.1.44.2.1.5.1.3.1.1 no-access
Each entry corresponds to one destination.
                                   ipxDestSysInstance 1.3.6.1.4.1.44.2.1.5.1.3.1.1.1 integer read-write
The unique identifier of the instance of IPX to which this row corresponds. This value may be written only when creating a new entry with ipxDestProtocol equal to static.
                                   ipxDestNetNum 1.3.6.1.4.1.44.2.1.5.1.3.1.1.2 netnumber read-write
The IPX network number of the destination. This value may be written only when creating a new entry with ipxDestProtocol equal to static.
                                   ipxDestProtocol 1.3.6.1.4.1.44.2.1.5.1.3.1.1.3 integer read-write
The routing protocol from which knowledge of this destination was obtained. This value may be written only when creating a new entry with ipxDestProtocol equal to static. Enumeration: 'static': 5, 'other': 1, 'local': 2, 'rip': 3, 'nlsp': 4.
                                   ipxDestCost 1.3.6.1.4.1.44.2.1.5.1.3.1.1.4 integer read-write
The cost to reach this destination. The meaning of the cost value is dependent on the routing protocol (i.e. Cost = delay in ticks for RIP, Cost = total path default cost for NLSP, etc.). This value may be written only when creating a new entry with ipxDestProtocol equal to static.
                                   ipxDestHopCount 1.3.6.1.4.1.44.2.1.5.1.3.1.1.5 integer read-write
The number of hops necessary to reach the destination. This value may be written only when creating a new entry with ipxDestProtocol equal to static.
                                   ipxDestNextHopCircIndex 1.3.6.1.4.1.44.2.1.5.1.3.1.1.6 integer read-write
The unique identifier of the circuit used to read the next hop. This value may be written only when creating a new entry with ipxDestProtocol equal to static.
                                   ipxDestNextHopNICAddress 1.3.6.1.4.1.44.2.1.5.1.3.1.1.7 octet string read-write
The NIC address of the next hop. This value may be written only when creating a new entry with ipxDestProtocol equal to static.
                                   ipxDestNextHopNetNum 1.3.6.1.4.1.44.2.1.5.1.3.1.1.8 netnumber read-write
The IPX network number of the next hop. This value may be written only when creating a new entry with ipxDestProtocol equal to static.
                                   ipxDestType 1.3.6.1.4.1.44.2.1.5.1.3.1.1.9 integer read-only
Indicates whether the destination is a network of a router. Enumeration: 'unknown': 1, 'router': 4, 'network': 5, 'nlspLevel1Router': 2.
                       cmc_ipx_ipxServices 1.3.6.1.4.1.44.2.1.5.1.4
                           ipxServTable 1.3.6.1.4.1.44.2.1.5.1.4.1 no-access
The table of services, indexed by name and type.
                               ipxServEntry 1.3.6.1.4.1.44.2.1.5.1.4.1.1 no-access
Each entry corresponds to one service.
                                   ipxServSysInstance 1.3.6.1.4.1.44.2.1.5.1.4.1.1.1 integer read-write
The unique identifier of the instance of IPX to which this entry corresponds. This value may be written only when creating entries with the value of ipxServProtocol equal to static.
                                   ipxServName 1.3.6.1.4.1.44.2.1.5.1.4.1.1.2 octet string read-write
The service name. This value may be written only when creating entries with value of ipxServProtocol equal to static.
                                   ipxServTypeValue 1.3.6.1.4.1.44.2.1.5.1.4.1.1.3 octet string read-write
The service type's hexadecimal value. This value may be written only when creating entries with the value of ipxServProtocol equal to static.
                                   ipxServType 1.3.6.1.4.1.44.2.1.5.1.4.1.1.4 integer read-write
The service type. This value may be written only when creating entries with the value of ipxServProtocol equal to static. Enumeration: 'unknown': 1.
                                   ipxServProtocol 1.3.6.1.4.1.44.2.1.5.1.4.1.1.5 integer read-write
The protocol from which knowledge of this service was obtained. This valuemay be written only when creating entries with ipxServProtocol equal to static. Enumeration: 'static': 5, 'other': 1, 'local': 2, 'sap': 6, 'nlsp': 4.
                                   ipxServNetNum 1.3.6.1.4.1.44.2.1.5.1.4.1.1.6 netnumber read-write
The IPX network number portion of the IPX address of the service. This value may be written only when creating entries with the value of ipxServProtocol equal to static.
                                   ipxServNode 1.3.6.1.4.1.44.2.1.5.1.4.1.1.7 octet string read-write
The node portion of the IPX address. This value may be written only when creating entries with the value of ipxServProtocol equal to static.
                                   ipxServSocket 1.3.6.1.4.1.44.2.1.5.1.4.1.1.8 octet string read-write
The socket portion of the IPX address of the service. This value may be written only when creating entries with the value of ipxServProtocol equal to static.
                   cmc_ipx_filter 1.3.6.1.4.1.44.2.1.5.2
                       cmcIpxFiltStatus 1.3.6.1.4.1.44.2.1.5.2.1 integer read-write
The status of IPX Filtering. Enumeration: 'disabled': 1, 'enabled': 2.
                       cmc_ipx_filt_packet 1.3.6.1.4.1.44.2.1.5.2.2
                           cmcIpxFilterTable 1.3.6.1.4.1.44.2.1.5.2.2.1 no-access
A list of IPX Filter table entries.
                               cmcIpxFiltEntry 1.3.6.1.4.1.44.2.1.5.2.2.1.1 no-access
An IPX Filter table entry containing objects that describe ipx packet transmission / reception restrictions. Creation of an IPX Filter table entry requires the presence of the cmcIpxFiltName and cmcIpxFiltMode objects along with at least one of the following objects: cmcIpxFiltSAddr cmcIpxFiltDAddr cmcIpxFiltPktType cmcIpxFiltIfIndex
                                   cmcIpxFiltName 1.3.6.1.4.1.44.2.1.5.2.2.1.1.1 octet string read-write
Name of filter entry. This is an ASCII string up to 6 octets long. This object is required in SET PDUs.
                                   cmcIpxFiltSAddr 1.3.6.1.4.1.44.2.1.5.2.2.1.1.2 ipxaddress read-write
Source IPX address. This object is required in SET PDUs.
                                   cmcIpxFiltDAddr 1.3.6.1.4.1.44.2.1.5.2.2.1.1.3 ipxaddress read-write
Destination IPX address. This object is required in SET PDUs.
                                   cmcIpxFiltPktType 1.3.6.1.4.1.44.2.1.5.2.2.1.1.4 integer read-write
Protocol to filter. This object is required in SET PDUs.
                                   cmcIpxFiltMode 1.3.6.1.4.1.44.2.1.5.2.2.1.1.5 integer read-write
Mode of the filter entry. This object is required in SET PDUs. Enumeration: 'nodial': 3, 'deny': 2, 'allow': 1.
                                   cmcIpxFiltType 1.3.6.1.4.1.44.2.1.5.2.2.1.1.6 integer read-write
The type of the IPX Filter Table entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the cmcIpxFilterTable. Enumeration: 'local': 1, 'netmgmt': 3, 'invalid': 2.
                                   cmcIpxFiltMoveOper 1.3.6.1.4.1.44.2.1.5.2.2.1.1.7 octet string read-write
Configuration object used to move IPX Filter table entries. Parameters are defined as: Octet 0 describes the move operation [1, 2] = [Before, After] Octet 1 - 6 contain the IPX Filter Entry name.
                                   cmcIpxFiltUseCount 1.3.6.1.4.1.44.2.1.5.2.2.1.1.8 integer read-write
The number of times the IPX Filter Table entry has been referenced.
                                   cmcIpxFiltDirection 1.3.6.1.4.1.44.2.1.5.2.2.1.1.9 integer read-write
The flow direction for the filter entry. This object must be specified along with an interface. Enumeration: 'both': 1, 'outgoing': 3, 'incoming': 2.
                                   cmcIpxFiltIfIndex 1.3.6.1.4.1.44.2.1.5.2.2.1.1.10 integer read-write
The interface index associated with the filter entry. This value is equivalent to the ifIndex object.
                                   cmcIpxFiltPriority 1.3.6.1.4.1.44.2.1.5.2.2.1.1.11 integer read-only
The priority of the entry. The highest priority entry (1) is searched first. The second highest priority entry (2) is searched next, and so on.
                                   cmcIpxFiltState 1.3.6.1.4.1.44.2.1.5.2.2.1.1.12 integer read-write
The validity of this entry in the IPX Packet Filter table. Setting this field to off indicates that this entry may be deleted from the table. Enumeration: 'on': 2, 'off': 1.
                       cmcIpxFiltRIPStatus 1.3.6.1.4.1.44.2.1.5.2.3 integer read-write
The status of IPX RIP Filtering. Enumeration: 'disabled': 1, 'enabled': 2.
                       cmc_ipx_filt_rip 1.3.6.1.4.1.44.2.1.5.2.4
                           cmcIpxFilterRIPTable 1.3.6.1.4.1.44.2.1.5.2.4.1 no-access
A list of IPX Filter RIP table entries.
                               cmcIpxFiltRIPEntry 1.3.6.1.4.1.44.2.1.5.2.4.1.1 no-access
An IPX RIP Filter table entry containing objects that describe datagram transmission/ reception restrictions. Creation of an IPX RIP Filter table entry requires the presence of the cmcIpxFiltRIPName and cmcIpxFiltRIPMode objects
                                   cmcIpxFiltRIPName 1.3.6.1.4.1.44.2.1.5.2.4.1.1.1 octet string read-write
Name of RIP filter entry. This is an ASCII string up to 6 octets long. This object is required in SET PDUs.
                                   cmcIpxFiltRIPNetworkNum 1.3.6.1.4.1.44.2.1.5.2.4.1.1.2 netnumber read-write
Network address. This object is required in SET PDUs.
                                   cmcIpxFiltRIPMoveOper 1.3.6.1.4.1.44.2.1.5.2.4.1.1.3 octet string read-write
Configuration object used to move IPX RIP Filter table entries. Parameters are defined as: Octet 0 describes the move operation [1, 2] = [Before, After] Octet 1 - 6 contain the IPX RIP Filter name.
                                   cmcIpxFiltRIPMode 1.3.6.1.4.1.44.2.1.5.2.4.1.1.4 integer read-write
Mode of the filter entry. This object is required in SET PDUs. Enumeration: 'nodial': 3, 'deny': 2, 'allow': 1.
                                   cmcIpxFiltRIPType 1.3.6.1.4.1.44.2.1.5.2.4.1.1.5 integer read-write
The type of the IPX RIP Filter Table entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the cmcIpxFilterRIPTable. Enumeration: 'local': 1, 'netmgmt': 3, 'invalid': 2.
                                   cmcIpxFiltRIPUseCount 1.3.6.1.4.1.44.2.1.5.2.4.1.1.6 integer read-write
The number of times the IPX RIP Filter Table entry has been referenced.
                                   cmcIpxFiltRIPDirection 1.3.6.1.4.1.44.2.1.5.2.4.1.1.7 integer read-write
The flow direction for the filter entry. This object must be specified along with an interface. Enumeration: 'both': 1, 'outgoing': 3, 'incoming': 2.
                                   cmcIpxFiltRIPQueryType 1.3.6.1.4.1.44.2.1.5.2.4.1.1.8 integer read-write
The type of packet entry. This object must be specified along with an interface. Enumeration: 'request': 1, 'response': 2.
                                   cmcIpxFiltRIPIfIndex 1.3.6.1.4.1.44.2.1.5.2.4.1.1.9 integer read-write
The interface index associated with the filter entry.
                                   cmcIpxFiltRIPPriority 1.3.6.1.4.1.44.2.1.5.2.4.1.1.10 integer read-only
The priority of the entry. The highest priority entry (1) is searched first. The second highest priority entry (2) is searched next, and so on.
                                   cmcIpxFiltRIPState 1.3.6.1.4.1.44.2.1.5.2.4.1.1.11 integer read-write
The validity of this entry in the IPX RIP Filter table. Setting this field to off indicates that this entry may be deleted from the table. Enumeration: 'on': 2, 'off': 1.
                       cmcIpxFiltSAPStatus 1.3.6.1.4.1.44.2.1.5.2.5 integer read-write
The status of IPX SAP Filtering. Enumeration: 'disabled': 1, 'enabled': 2.
                       cmc_ipx_filt_sap 1.3.6.1.4.1.44.2.1.5.2.6
                           cmcIpxFilterSAPTable 1.3.6.1.4.1.44.2.1.5.2.6.1 no-access
A list of IPX Filter SAP table entries.
                               cmcIpxFiltSAPEntry 1.3.6.1.4.1.44.2.1.5.2.6.1.1 no-access
An IPX SAP Filter table entry containing objects that describe datagram transmission/ reception restrictions. Creation of an IPX SAP Filter table entry requires the presence of the cmcIpxFiltSAPName and cmcIpxFiltSAPMode objects
                                   cmcIpxFiltSAPName 1.3.6.1.4.1.44.2.1.5.2.6.1.1.1 octet string read-write
Name of SAP filter entry. This is an ASCII string up to 6 octets long. This object is required in SET PDUs.
                                   cmcIpxFiltSAPServerName 1.3.6.1.4.1.44.2.1.5.2.6.1.1.2 octet string read-write
Name of SAP server.
                                   cmcIpxFiltSAPServerType 1.3.6.1.4.1.44.2.1.5.2.6.1.1.3 integer read-write
The types of servers to filter.
                                   cmcIpxFiltSAPMoveOper 1.3.6.1.4.1.44.2.1.5.2.6.1.1.4 octet string read-write
Configuration object used to move IPX SAP Filter table entries. Parameters are defined as: Octet 0 describes the move operation [1, 2] = [Before, After] Octet 1 - 6 contain the IPX SAP Filter name.
                                   cmcIpxFiltSAPMode 1.3.6.1.4.1.44.2.1.5.2.6.1.1.5 integer read-write
Mode of the filter entry. This object is required in SET PDUs. Enumeration: 'nodial': 3, 'deny': 2, 'allow': 1.
                                   cmcIpxFiltSAPType 1.3.6.1.4.1.44.2.1.5.2.6.1.1.6 integer read-write
The type of the IPX SAP Filter Table entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the cmcIpxFilterSAPTable. Enumeration: 'local': 1, 'netmgmt': 3, 'invalid': 2.
                                   cmcIpxFiltSAPUseCount 1.3.6.1.4.1.44.2.1.5.2.6.1.1.7 integer read-write
The number of times the IPX SAP Filter Table entry has been referenced.
                                   cmcIpxFiltSAPDirection 1.3.6.1.4.1.44.2.1.5.2.6.1.1.8 integer read-write
The flow direction for the filter entry. This object must be specified along with an interface. Enumeration: 'both': 1, 'outgoing': 3, 'incoming': 2.
                                   cmcIpxFiltSAPQueryType 1.3.6.1.4.1.44.2.1.5.2.6.1.1.9 integer read-write
The type of packet entry. This object must be specified along with an interface. Enumeration: 'request': 1, 'response': 2.
                                   cmcIpxFiltSAPIfIndex 1.3.6.1.4.1.44.2.1.5.2.6.1.1.10 integer read-write
The interface index associated with the filter entry.
                                   cmcIpxFiltSAPPriority 1.3.6.1.4.1.44.2.1.5.2.6.1.1.11 integer read-only
The priority of the entry. The highest priority entry (1) is searched first. The second highest priority entry (2) is searched next, and so on.
                                   cmcIpxFiltSAPState 1.3.6.1.4.1.44.2.1.5.2.6.1.1.12 integer read-write
The validity of this entry in the IPX SAP Filter table. Setting this field to off indicates that this entry may be deleted from the table. Enumeration: 'on': 2, 'off': 1.
           cmc_trapA 1.3.6.1.4.1.44.2.6
               cmc_trapB 1.3.6.1.4.1.44.2.6.6
                   cmc_trapC 1.3.6.1.4.1.44.2.6.6.5
                       cmc_trapD 1.3.6.1.4.1.44.2.6.6.5.3
                           cmc_trapE 1.3.6.1.4.1.44.2.6.6.5.3.10
                                   cmcConnectionEstablished 1.3.6.1.4.1.44.2.6.6.5.3.100.1
A cmcConnectionEstablished(1) trap is generated when a wide area network connection is established on a dynamic link. The variable-binding contains the ifIndex value of the effected interface.
                                   cmcConnectionTerminated 1.3.6.1.4.1.44.2.6.6.5.3.100.2
A cmcConnectionTerminated(2) trap is generated when a wide area network connection is terminated on a dynamic link. The variable-binding contains the ifIndex value of the effected interface.