CM-SAT-MIB: View SNMP OID List / Download MIB

VENDOR: ADVA AG OPTICAL NETWORKING


 Home MIB: CM-SAT-MIB
Download as:   
SNMPv2-CONF, CM-FACILITY-MIB, SNMPv2-SMI, CM-SA-MIB, CM-COMMON-MIB, CM-ENTITY-MIB, ADVA-MIB, SNMPv2-TC, IEEE8021-CFM-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cmServiceActivationMIB 1.3.6.1.4.1.2544.1.12.28
This module defines the Service Activation MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
       cmServActivationObjects 1.3.6.1.4.1.2544.1.12.28.1
           satControlTable 1.3.6.1.4.1.2544.1.12.28.1.1 no-access
A list of entries for the control of SAT Control.
               satControlEntry 1.3.6.1.4.1.2544.1.12.28.1.1.1 no-access
A conceptual row in the satControlTable.
                   satControlIndex 1.3.6.1.4.1.2544.1.12.28.1.1.1.1 integer32 no-access
The index of the Service Activation Test.
                   satControlName 1.3.6.1.4.1.2544.1.12.28.1.1.1.2 displaystring read-write
The alias of the Service Activation Test.
                   satControlTestMode 1.3.6.1.4.1.2544.1.12.28.1.1.1.3 serviceactivationtestmode read-write
The mode of the Service Activation Test.
                   satControlTestProcedures 1.3.6.1.4.1.2544.1.12.28.1.1.1.4 satprocedureslist read-write
A List of Service Activation Test procedures.
                   satControlConfigTestDuration 1.3.6.1.4.1.2544.1.12.28.1.1.1.5 integer32 read-write
The duration of CIR step test, expressed in seconds.
                   satControlConfigCIRTestStepNum 1.3.6.1.4.1.2544.1.12.28.1.1.1.6 integer32 read-write
The number of steps in CIR step test.
                   satControlConfigCIRTestStepDuration 1.3.6.1.4.1.2544.1.12.28.1.1.1.7 integer32 read-write
The duration of each CIR step test.
                   satControlPerfTestDuration 1.3.6.1.4.1.2544.1.12.28.1.1.1.8 integer32 read-write
The duration of the SAT Performance Test, expressed in minutes.
                   satControlStatus 1.3.6.1.4.1.2544.1.12.28.1.1.1.9 satstatus read-only
The overall SAT Control Test Status.
                   satControlAction 1.3.6.1.4.1.2544.1.12.28.1.1.1.10 sattestaction read-write
The start/stop action of the SAT Control.
                   satControlStorageType 1.3.6.1.4.1.2544.1.12.28.1.1.1.11 storagetype read-only
The type of storage configured for this entry.
                   satControlRowStatus 1.3.6.1.4.1.2544.1.12.28.1.1.1.12 rowstatus read-only
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of satControlRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with satControlRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The satControlRowStatus object may be modified if the associated instance of this object is equal to active(1).
                   satControlFailCause 1.3.6.1.4.1.2544.1.12.28.1.1.1.13 displaystring read-only
The information about the reason of the Test failure.
                   satControlTestStartTime 1.3.6.1.4.1.2544.1.12.28.1.1.1.14 dateandtime read-only
The start time of this SAT Control.
                   satControlFlpduTagOverride 1.3.6.1.4.1.2544.1.12.28.1.1.1.15 truthvalue read-write
Whether permit user to configure FLPDU explicitly. Disabled: FLPDUs tag is inherited from SCM of MEP. Enabled: User can configure FLPDUs tag explicitly, which will override the VLAN tags from MEP.
           satStreamTable 1.3.6.1.4.1.2544.1.12.28.1.2 no-access
A list of entries for the control of SAT Streams.
               satStreamEntry 1.3.6.1.4.1.2544.1.12.28.1.2.1 no-access
A conceptual row in the satStreamTable.
                   satStreamIndex 1.3.6.1.4.1.2544.1.12.28.1.2.1.1 integer32 no-access
The index of the Service Activation Test Stream.
                   satStreamName 1.3.6.1.4.1.2544.1.12.28.1.2.1.2 displaystring read-write
The alias of the Service Activation Test Stream.
                   satStreamTestPort 1.3.6.1.4.1.2544.1.12.28.1.2.1.3 variablepointer read-write
The related port of the Service Activation Test Stream.
                   satStreamTestDirection 1.3.6.1.4.1.2544.1.12.28.1.2.1.4 satdirection read-write
The direction of the Service Activation Test Stream.
                   satStreamDestMacAddress 1.3.6.1.4.1.2544.1.12.28.1.2.1.5 macaddress read-write
This object describes the destination MAC address of FLPDU.
                   satStreamFramePayloadType 1.3.6.1.4.1.2544.1.12.28.1.2.1.6 satframepayloadtype read-write
The type of Payload of the Frame Loss PDU.
                   satStreamCustomFramePayload 1.3.6.1.4.1.2544.1.12.28.1.2.1.7 displaystring read-write
This object describes the customized frame payload.
                   satStreamFrameSizeList 1.3.6.1.4.1.2544.1.12.28.1.2.1.8 displaystring read-write
This object describes a list of Frame Sizes used in FLPDU.
                   satStreamSacProfileId 1.3.6.1.4.1.2544.1.12.28.1.2.1.9 variablepointer read-write
This object describes the related Service Acceptance Criteria (SAC) Profile Id.
                   satStreamSrcMepId 1.3.6.1.4.1.2544.1.12.28.1.2.1.10 variablepointer read-write
This object describes the Local MEP related with SAT Test Stream.
                   satStreamDestMepType 1.3.6.1.4.1.2544.1.12.28.1.2.1.11 mepdestinationtype read-write
This object describes the type of Destination MEP, which can be based on MEP id or MAC Address.
                   satStreamDestMepId 1.3.6.1.4.1.2544.1.12.28.1.2.1.12 integer32 read-write
This object describes the destination MEP id.
                   satStreamDestMepMacAddr 1.3.6.1.4.1.2544.1.12.28.1.2.1.13 macaddress read-write
This object describes the Destination MEP's MAC Address.
                   satStreamDmmPacketSize 1.3.6.1.4.1.2544.1.12.28.1.2.1.14 integer32 read-write
This object describes the Delay Measurement Message (DMM) frame size.
                   satStreamDmmPacketInterval 1.3.6.1.4.1.2544.1.12.28.1.2.1.15 esaprobepktintervaltype read-write
This object describes the Delay Measurement Message (DMM) frame generation interval.
                   satStreamOverallResult 1.3.6.1.4.1.2544.1.12.28.1.2.1.16 satresult read-only
This object describes the test result.
                   satStreamAction 1.3.6.1.4.1.2544.1.12.28.1.2.1.17 sattestaction read-write
This object describes the operation on this test.
                   satStreamStatus 1.3.6.1.4.1.2544.1.12.28.1.2.1.18 satstatus read-only
This object describes the test status of this Test Stream.
                   satStreamCurrentTestProcedure 1.3.6.1.4.1.2544.1.12.28.1.2.1.19 satprocedurestype read-only
This object describes the current test procedure.
                   satStreamCurrentConfigCirTestStep 1.3.6.1.4.1.2544.1.12.28.1.2.1.20 integer32 read-only
This object describes the current step number of CIR Test.
                   satStreamInner1VlanId 1.3.6.1.4.1.2544.1.12.28.1.2.1.21 vlanid read-write
This object describes the Inner1 VLAN Id.
                   satStreamInner1VlanPri 1.3.6.1.4.1.2544.1.12.28.1.2.1.22 vlanpriority read-write
This object describes the Inner1 VLAN Priority.
                   satStreamInner1VlanEnabled 1.3.6.1.4.1.2544.1.12.28.1.2.1.23 truthvalue read-write
This object describes whether the Inner1 VLAN enabled.
                   satStreamInner1ValnEtherType 1.3.6.1.4.1.2544.1.12.28.1.2.1.24 integer32 read-write
This object describes the Inner2 VLAN EtherType.
                   satStreamInner2VlanId 1.3.6.1.4.1.2544.1.12.28.1.2.1.25 vlanid read-write
This object describes the Inner2 VLAN Id.
                   satStreamInner2VlanPri 1.3.6.1.4.1.2544.1.12.28.1.2.1.26 vlanpriority read-write
This object describes the Inner2 VLAN Priority.
                   satStreamInner2VlanEnabled 1.3.6.1.4.1.2544.1.12.28.1.2.1.27 truthvalue read-write
This object describes whether the Inner2 VLAN enabled.
                   satStreamInner2VlanEtherType 1.3.6.1.4.1.2544.1.12.28.1.2.1.28 integer32 read-write
This object describes whether the Inner2 VLAN ether type.
                   satStreamOuterVlanId 1.3.6.1.4.1.2544.1.12.28.1.2.1.29 vlanid read-write
This object describes the Outer VLAN Id.
                   satStreamOuterVlanPri 1.3.6.1.4.1.2544.1.12.28.1.2.1.30 vlanpriority read-write
This object describes the Outer VLAN Priority.
                   satStreamOuterVlanEnabled 1.3.6.1.4.1.2544.1.12.28.1.2.1.31 truthvalue read-write
This object describes whether the Outer VLAN enabled.
                   satStreamOuterVlanEtherType 1.3.6.1.4.1.2544.1.12.28.1.2.1.32 integer32 read-write
This object describes whether the Outer VLAN Ethertype.
                   satStreamDeiEnabled 1.3.6.1.4.1.2544.1.12.28.1.2.1.33 truthvalue read-write
This object describes whether the DEI enabled.
                   satStreamGreenPcp 1.3.6.1.4.1.2544.1.12.28.1.2.1.34 integer32 read-write
This object describes the PCP value for Green Packets.
                   satStreamYellowPcp 1.3.6.1.4.1.2544.1.12.28.1.2.1.35 integer32 read-write
This object describes the PCP value for Yellow Packets.
                   satStreamColorMode 1.3.6.1.4.1.2544.1.12.28.1.2.1.36 policercolormode read-write
This object describes the color mode for Policing test.
                   satStreamCirLo 1.3.6.1.4.1.2544.1.12.28.1.2.1.37 unsigned32 read-write
This object describes CIR low 32 bits.
                   satStreamCirHi 1.3.6.1.4.1.2544.1.12.28.1.2.1.38 unsigned32 read-write
This object describes CIR high 32 bits.
                   satStreamEirLo 1.3.6.1.4.1.2544.1.12.28.1.2.1.39 unsigned32 read-write
This object describes EIR low 32 bits.
                   satStreamEirHi 1.3.6.1.4.1.2544.1.12.28.1.2.1.40 unsigned32 read-write
This object describes EIR high 32 bits.
                   satStreamCbs 1.3.6.1.4.1.2544.1.12.28.1.2.1.41 unsigned32 read-write
This object describes CBS.
                   satStreamEbs 1.3.6.1.4.1.2544.1.12.28.1.2.1.42 unsigned32 read-write
This object describes CBS.
                   satStreamStorageType 1.3.6.1.4.1.2544.1.12.28.1.2.1.43 storagetype read-only
The type of storage configured for this entry.
                   satStreamRowStatus 1.3.6.1.4.1.2544.1.12.28.1.2.1.44 rowstatus read-only
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of satStreamRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with satStreamRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The satStreamRowStatus object may be modified if the associated instance of this object is equal to active(1).
                   satStreamDmmPktPriority 1.3.6.1.4.1.2544.1.12.28.1.2.1.45 vlanpriority read-write
This object describes the Dmm packet priority.
                   satStreamMFactor 1.3.6.1.4.1.2544.1.12.28.1.2.1.46 unsigned32 read-write
The M factor is used in test result validation. It is added to allow for the effect of the traffic policer's CBS and EBS settings and test time. Roughly, it equals to EBS/Test Duration, user should configure its value based on experience test.
           satResultStatsTable 1.3.6.1.4.1.2544.1.12.28.1.3 no-access
A list of entries for the control of SAT Result Statistics.
               satResultStatsEntry 1.3.6.1.4.1.2544.1.12.28.1.3.1 no-access
A conceptual row in the satResultStatsTable.
                   satResultStatsTestType 1.3.6.1.4.1.2544.1.12.28.1.3.1.1 satprocedurestype no-access
The Test Type of the Service Activation Test.
                   satResultStatsStepNumber 1.3.6.1.4.1.2544.1.12.28.1.3.1.2 integer32 no-access
The Test step number of the Service Activation Test.
                   satResultStatsSessionId 1.3.6.1.4.1.2544.1.12.28.1.3.1.3 unsigned32 read-only
The session id of the Service Activation Test.
                   satResultStatsStartTime 1.3.6.1.4.1.2544.1.12.28.1.3.1.4 dateandtime read-only
The start time of the Service Activation Test.
                   satResultStatsEndTime 1.3.6.1.4.1.2544.1.12.28.1.3.1.5 dateandtime read-only
The end time of the Service Activation Test.
                   satResultStatsStatus 1.3.6.1.4.1.2544.1.12.28.1.3.1.6 satstatus read-only
The Status of the Service Activation Test.
                   satResultStatsResult 1.3.6.1.4.1.2544.1.12.28.1.3.1.7 satresult read-only
This object describes SAT whether pass.
                   satResultStatsMinIRGMeasured 1.3.6.1.4.1.2544.1.12.28.1.3.1.8 counter64 read-only
This object describes the minimum Information Rate (IR) for Green Packets.
                   satResultStatsAvgIRGMeasured 1.3.6.1.4.1.2544.1.12.28.1.3.1.9 counter64 read-only
This object describes the average Information Rate (IR) for Green Packets.
                   satResultStatsMaxIRGMeasured 1.3.6.1.4.1.2544.1.12.28.1.3.1.10 counter64 read-only
This object describes the maximum Information Rate (IR) for Green Packets.
                   satResultStatsMinIRYMeasured 1.3.6.1.4.1.2544.1.12.28.1.3.1.11 counter64 read-only
This object describes the minimum Information Rate (IR) for Yellow Packets.
                   satResultStatsAvgIRYMeasured 1.3.6.1.4.1.2544.1.12.28.1.3.1.12 counter64 read-only
This object describes the average Information Rate (IR) for Yellow Packets.
                   satResultStatsMaxIRYMeasured 1.3.6.1.4.1.2544.1.12.28.1.3.1.13 counter64 read-only
This object describes the maximum Information Rate (IR) for Yellow Packets.
                   satResultStatsFlrGMeasured 1.3.6.1.4.1.2544.1.12.28.1.3.1.14 integer32 read-only
This object describes the Frame Loss Ratio (FLR) for Green Packets. From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost. For the earlier release, If its value is 260001, it means 26.0001% frame lost.
                   satResultStatsFlrYMeasured 1.3.6.1.4.1.2544.1.12.28.1.3.1.15 integer32 read-only
This object describes the Frame Loss Ratio (FLR) for Yellow Packets. From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost. For the earlier release, If its value is 260001, it means 26.0001% frame lost.
                   satResultStatsFlrGCounts 1.3.6.1.4.1.2544.1.12.28.1.3.1.16 counter64 read-only
This object describes the Frame Loss (FL) count for Green Packets.
                   satResultStatsFlrYCounts 1.3.6.1.4.1.2544.1.12.28.1.3.1.17 counter64 read-only
This object describes the Frame Loss (FL) count for Yellow Packets.
                   satResultStatsMinFTDGMeasured 1.3.6.1.4.1.2544.1.12.28.1.3.1.18 unsigned32 read-only
This object describes the minimum Frame Transfer Delay (FTD) for Green Packets.
                   satResultStatsAvgFTDGMeasured 1.3.6.1.4.1.2544.1.12.28.1.3.1.19 unsigned32 read-only
This object describes the average Frame Transfer Delay (FTD) for Green Packets.
                   satResultStatsMaxFTDGMeasured 1.3.6.1.4.1.2544.1.12.28.1.3.1.20 unsigned32 read-only
This object describes the maximum Frame Transfer Delay (FTD) for Green Packets.
                   satResultStatsIMinFDVGMeasured 1.3.6.1.4.1.2544.1.12.28.1.3.1.21 unsigned32 read-only
This object describes the minimum Frame Delay Variation (FDV) for Green Packets.
                   satResultStatsIAvgFDVGMeasured 1.3.6.1.4.1.2544.1.12.28.1.3.1.22 unsigned32 read-only
This object describes the average Frame Delay Variation (FDV) for Green Packets.
                   satResultStatsIMaxFDVGMeasured 1.3.6.1.4.1.2544.1.12.28.1.3.1.23 unsigned32 read-only
This object describes the maximum Frame Delay Variation (FDV) for Green Packets.
                   satResultStatsISyncErrorsNum 1.3.6.1.4.1.2544.1.12.28.1.3.1.24 unsigned32 read-only
The number of (time) Synchronization Errors between SAT Control and SAT Responder in the current Test.
                   satResultStatsIfNegFLG 1.3.6.1.4.1.2544.1.12.28.1.3.1.25 truthvalue read-only
This object means whether negative green frame loss. True: negative loss of green packets occurs, which means receiving more green packets than expected. False: negative loss of green packets doesn't occur, which means not receiving more green packets than expected.
                   satResultStatsIfNegFLY 1.3.6.1.4.1.2544.1.12.28.1.3.1.26 truthvalue read-only
This object means whether negative yellow frame loss. True: negative loss of yellow packets occurs, which means receiving more yellow packets than expected. False: negative loss of yellow packets doesn't occur, which means not receiving more yellow packets than expected.
                   satResultStatsAvgIRT 1.3.6.1.4.1.2544.1.12.28.1.3.1.27 counter64 read-only
This object describes Average IR of total packets, non distinguishing green or yellow. Only valid for color blind test.
                   satResultStatsFlrTMeasured 1.3.6.1.4.1.2544.1.12.28.1.3.1.28 integer32 read-only
This object describes the Frame Loss Ratio (FLR) for Total Packets. No distinguish color, negative value means receiving much more packets than expected. Only valid for color blind test. If its value is 26000001, it means 26.000001% frame lost.
                   satResultStatsFlTCounts 1.3.6.1.4.1.2544.1.12.28.1.3.1.29 counter64 read-only
This object describes the Frame Loss (FL) count for Total Packets.
                   satResultStatsIfNegFLT 1.3.6.1.4.1.2544.1.12.28.1.3.1.30 truthvalue read-only
This object means whether negative total frame loss. True: negative loss of green packets occurs, which means receiving more green packets than expected. False: negative loss of green packets doesn't occur, which means not receiving more green packets than expected.
           satSacProfileTable 1.3.6.1.4.1.2544.1.12.28.1.4 no-access
A list of entries for the control of SAT Service Acceptance Criteria (SAC) Profile.
               satSacProfileEntry 1.3.6.1.4.1.2544.1.12.28.1.4.1 no-access
A conceptual row in the satSacProfileTable.
                   satSacProfileIndex 1.3.6.1.4.1.2544.1.12.28.1.4.1.1 integer32 no-access
The index of SAT Service Acceptance Criteria (SAC) Profile.
                   satSacProfileAlias 1.3.6.1.4.1.2544.1.12.28.1.4.1.2 displaystring read-write
The alias of SAT Service Acceptance Criteria (SAC) Profile.
                   satSacProfileFLR 1.3.6.1.4.1.2544.1.12.28.1.4.1.3 integer32 read-write
The Frame Loss Ratio (FLR) acceptance criteria of this SAC Profile. From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost. For the earlier release, If its value is 260001, it means 26.0001% frame lost.
                   satSacProfileFTD 1.3.6.1.4.1.2544.1.12.28.1.4.1.4 unsigned32 read-write
The Frame Transfer Delay (FTD) acceptance criteria of this SAC Profile.
                   satSacProfileFDV 1.3.6.1.4.1.2544.1.12.28.1.4.1.5 unsigned32 read-write
The frame transfer delay variation of SAT Service Acceptance Criteria (SAC) Profile.
                   satSacProfileStorageType 1.3.6.1.4.1.2544.1.12.28.1.4.1.6 storagetype read-only
The type of storage configured for this entry.
                   satSacProfileRowStatus 1.3.6.1.4.1.2544.1.12.28.1.4.1.7 rowstatus read-only
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of satSacProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with satSacProfileRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The satSacProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
           satResponderSessionTable 1.3.6.1.4.1.2544.1.12.28.1.5 no-access
A list of entries for the control of SAT Responder Session.
               satResponderSessionEntry 1.3.6.1.4.1.2544.1.12.28.1.5.1 no-access
A conceptual row in the satResponderSessionTable.
                   satResponderSessionIndex 1.3.6.1.4.1.2544.1.12.28.1.5.1.1 unsigned32 no-access
The index of the entry.
                   satResponderSessionId 1.3.6.1.4.1.2544.1.12.28.1.5.1.2 unsigned32 read-only
The id of active test session negotiated between SAT Responder and SAT Control.
                   satResponderSessionControlMepMacAddr 1.3.6.1.4.1.2544.1.12.28.1.5.1.3 macaddress read-only
This object describes the Control MEP's MAC Address.
                   satResponderSessionMepId 1.3.6.1.4.1.2544.1.12.28.1.5.1.4 variablepointer read-only
The local MEP Id.
                   satResponderSessionStorageType 1.3.6.1.4.1.2544.1.12.28.1.5.1.5 storagetype read-only
The type of storage configured for this entry.
                   satResponderSessionRowStatus 1.3.6.1.4.1.2544.1.12.28.1.5.1.6 rowstatus read-only
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of satResponderSessionRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with satResponderSessionRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The satResponderSessionRowStatus object may be modified if the associated instance of this object is equal to active(1).
           networkElementSatParamsTable 1.3.6.1.4.1.2544.1.12.28.1.6 no-access
Entries may be auto discovered, or can be explicitly created by SNMP Manager. Each remotely discovered shelf is represented as a row in this table.
               networkElementSatParamsEntry 1.3.6.1.4.1.2544.1.12.28.1.6.1 no-access
A conceptual row in the networkElementSatParamsTable.
                   neSatParamsEtherType 1.3.6.1.4.1.2544.1.12.28.1.6.1.1 unsigned32 read-write
This object describes the SAT System EtherType.
           satCfmMepExtTable 1.3.6.1.4.1.2544.1.12.28.1.7 no-access
This objects describe the SAT responder whether enabled on the MEP.
               satCfmMepExtEntry 1.3.6.1.4.1.2544.1.12.28.1.7.1 no-access
A conceptual row in the satCfmMepExtTable.
                   satCfmMepSatResponderEnabled 1.3.6.1.4.1.2544.1.12.28.1.7.1.1 truthvalue read-write
This objects describes the SAT Responder whether enabled on the MEP.
       cmServActivationNotifications 1.3.6.1.4.1.2544.1.12.28.2
       cmServActivationConformance 1.3.6.1.4.1.2544.1.12.28.3
           cmServActivationCompliances 1.3.6.1.4.1.2544.1.12.28.3.1
               cmServActivationCompliance 1.3.6.1.4.1.2544.1.12.28.3.1.1
Describes the requirements for conformance to the CM SAT group.
           cmServActivationGroups 1.3.6.1.4.1.2544.1.12.28.3.2
               cmSatGroup 1.3.6.1.4.1.2544.1.12.28.3.2.1
A collection of objects used to manage the CM SAT functionality.