CISCOSB-Redistribute: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCOSB-Redistribute
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rlRedistribute 1.3.6.1.4.1.9.6.1.101.26.27
       rlRedistTable 1.3.6.1.4.1.9.6.1.101.26.27.1 no-access
Using a routing protocol to advertise routes that are learned by some other means, such as by another routing protocol, static routes, or directly connected routes, is called redistribution. This table is used to configure under which conditions will redistribution occur and which actions (if any) should be done on redistributed route.
           rlRedistEntry 1.3.6.1.4.1.9.6.1.101.26.27.1.1 no-access
.
               rlRedistDstProtocol 1.3.6.1.4.1.9.6.1.101.26.27.1.1.1 rlredistdstprotocol no-access
The protocol to which the routes are exported to
               rlRedistSrcProtocol 1.3.6.1.4.1.9.6.1.101.26.27.1.1.2 rlredistsrcprotocol no-access
The protocol from which the routes are imported from
               rlRedistDstProcessId 1.3.6.1.4.1.9.6.1.101.26.27.1.1.3 integer no-access
Parameter semantic differs according to rlRedistDstProtocol. in OSPF this is an appropriate OSPF process ID to which routes are to be redistributed
               rlRedistSrcProcessId 1.3.6.1.4.1.9.6.1.101.26.27.1.1.4 integer no-access
Parameter semantic differs according to rlRedistSrcProtocol. in BGP and EIGRP keyword, this is an autonomous system number, in range 1 to 65535.. in OSPF, this is an appropriate OSPF process ID from which routes are to be redistributed. 0 means no process ID
               rlRedistMatchType 1.3.6.1.4.1.9.6.1.101.26.27.1.1.5 rlredistmatchtype no-access
Applicable only when rlRedistSrcProtocol is OSPF defines the criteria by which OSPF routes are redistributed into other routing domains. It can be one of the following: rlRedistMatchTypeInternal - Routes that are internal to a specific autonomous system. rlRedistMatchTypeExternalTwo - Routes that are external to the autonomous system, but are imported into OSPF as Type 2 external route. rlRedistMatchTypeExternalOne - Routes that are external to the autonomous system, but are imported into OSPF as Type 1 external route.
               rlRedistRoutMapName 1.3.6.1.4.1.9.6.1.101.26.27.1.1.6 displaystring no-access
Specifies the route map that should be interrogated to filter the importation of routes from this source routing protocol to the current routing protocol. If not specified, all routes are redistributed. If this keyword is specified, but no route map tags are listed, no routes will be imported.
               rlRedistAsNumber 1.3.6.1.4.1.9.6.1.101.26.27.1.1.7 integer read-write
Autonomous system number for the redistributed route. Number in range from 1 to 65535. 0 means no AS number defined
               rlRedistMetricTransparent 1.3.6.1.4.1.9.6.1.101.26.27.1.1.8 truthvalue read-write
Redistribute routes without changing the metric
               rlRedistMetricValue 1.3.6.1.4.1.9.6.1.101.26.27.1.1.9 integer read-write
When redistributing from one OSPF process to another OSPF process on the same router, the metric will be carried through from one process to the other if no metric value is specified. When redistributing other processes to an OSPF process, the default metric is 20 when no metric value is specified.
               rlRedistMetricType 1.3.6.1.4.1.9.6.1.101.26.27.1.1.10 rlredistmetrictype read-write
Parameter semantic differs according to rlRedistSrcProtocol. In OSPF specifies the external link type associated with the default route advertised into the OSPF routing domain. It can be one of two values: 1 - Type 1 external route 2 - Type 2 external route
               rlRedistSubnets 1.3.6.1.4.1.9.6.1.101.26.27.1.1.11 truthvalue read-write
For redistributing routes into OSPF, the scope of redistribution for the specified protocol
               rlRedistOnlyNSSA 1.3.6.1.4.1.9.6.1.101.26.27.1.1.12 truthvalue read-write
Sets the nssa-only attribute for all routes redistributed into OSPF.
               rlRedistRowStatus 1.3.6.1.4.1.9.6.1.101.26.27.1.1.13 rowstatus read-only
Row Status