CISCO-WWNMGR-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-WWNMGR-MIB
Download as:   
SNMPv2-CONF, SNMPv2-TC, CISCO-ST-TC, SNMPv2-SMI, CISCO-SMI, CISCO-VSAN-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoWwnmgrMIB 1.3.6.1.4.1.9.9.286
The World Wide Name (WWN) in the fibre channel networking technology is equivalent to the MAC address in Ethernet. There are six different types of WWNs defined in ANSI Standard for Fibre Channel Framing and Signalling (FC-FS) Spec Rev 1.4. This mib provides the mechanism to configure and report WWNs for the fibre channel devices connected to a fibre channel switch. GLOSSARY : NAA Network Address Authority (NAA) address formats for WWN. OUI Organization Unique Identifier. VSAN Virtual Storage Area Network, similar to a VLAN.
         ciscoWwnmMIBObjects 1.3.6.1.4.1.9.9.286.1
             wwnmConfigurationGroup 1.3.6.1.4.1.9.9.286.1.1
                 wwnmSecondaryBaseMacAddress 1.3.6.1.4.1.9.9.286.1.1.1 macaddress read-write
The first MAC address used for generating World Wide Names (WWNs) when the default range of WWNs generated from supervisor MAC address are exhausted.
                 wwnmSecondaryMacAddressRange 1.3.6.1.4.1.9.9.286.1.1.2 unsigned32 read-write
The number of secondary MAC Addresses starting from and including the wwnmSecondayBaseMacAddress.
                 wwnmType1MaxWwns 1.3.6.1.4.1.9.9.286.1.1.3 unsigned32 read-only
Maximum number of NAA Type 1 WWNs that are available for assignment to internal entities.
                 wwnmType1AvailableWwns 1.3.6.1.4.1.9.9.286.1.1.4 gauge32 read-only
Number of NAA Type 1 WWNs that are currently available for assignment to internal entities.
                 wwnmTypeOtherMaxWwns 1.3.6.1.4.1.9.9.286.1.1.5 unsigned32 read-only
Maximum number of total WWNs of types NAA Type 2 and Type 5 WWNs available for assignment to internal entities.
                 wwnmTypeOtherAvailableWwns 1.3.6.1.4.1.9.9.286.1.1.6 gauge32 read-only
Sum of number of NAA Type 2 and Type 5 WWNs currently available for assignment to the internal entities.
                 wwnmType1ReservedWwns 1.3.6.1.4.1.9.9.286.1.1.7 unsigned32 read-only
Number of NAA Type 1 WWNs that are reserved for internal purposes.
                 wwnmTypeOtherReservedWwns 1.3.6.1.4.1.9.9.286.1.1.8 unsigned32 read-only
Number of total WWNs of types NAA Type 2 and Type 5 WWNs reserved for internal purposes.
                 wwnmVsanWwnTable 1.3.6.1.4.1.9.9.286.1.1.9 no-access
This table provides an option to configure user specified WWN for the VSANs. To enable the fibre channel switch to interoperate with other vendor switches on a VSAN, user needs to configure a WWN (based on the other vendor switch OUI) for the corresponding VSAN. To create a new entry in this table for a VSAN, a corresponding entry for that VSAN should exists in the vsanTable. Also, the value of the corresponding instance of vsanAdminState should be in 'suspended' state and the VSAN should interoperate in mode 4 (represented by vsanInterOperValue '4'). An entry from this table can be removed by any one of the following ways, a. Setting the corresponding instance wwnmVsanWwnRowStatus value to 'destroy'. b. Deleting the corresponding VSAN from vsanTable. c. Changing the corresponding VSAN configuration from interoperate mode 4 (represented by vsanInterOperValue '4') to any other value.
                     wwnmVsanWwnEntry 1.3.6.1.4.1.9.9.286.1.1.9.1 no-access
An entry (conceptual row) in this table. Each entry of this table represents the WWN configuration set for a VSAN.
                         wwnmVsanWwn 1.3.6.1.4.1.9.9.286.1.1.9.1.1 fcnameid read-only
The user configurable WWN for a VSAN. For row creation, it is mandatory to set the value of this object to a valid value.
                         wwnmVsanWwnStorageType 1.3.6.1.4.1.9.9.286.1.1.9.1.2 storagetype read-only
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
                         wwnmVsanWwnRowStatus 1.3.6.1.4.1.9.9.286.1.1.9.1.3 rowstatus read-only
The status of this conceptual row. The value of this object cannot be 'active' unless the value of the corresponding instance of 'wwnmVsanWwn' is set to a valid value.
             wwnmNotificationGroup 1.3.6.1.4.1.9.9.286.1.2
                 wwnmNotification 1.3.6.1.4.1.9.9.286.1.2.1
                     wwnmNotificationPrefix 1.3.6.1.4.1.9.9.286.1.2.1.0
                         wwnmType1WwnShortageNotify 1.3.6.1.4.1.9.9.286.1.2.1.0.1
A WWN shortage notification is generated whenever the number of available Type 1 WWNs 'wwnmType1AvailableWwns' reduces to either 20% or 10% or 0% of the maximum number of Type 1 WWNs 'wwnmType1MaxWwns'. After a shortage event is generated for a threshhold (say 20%), another such event will not be generated until after an availability event (see wwnmType1WwnAvailableNotify) is generated for the same threshold.
                         wwnmType1WwnAvailableNotify 1.3.6.1.4.1.9.9.286.1.2.1.0.2
An availability notification is generated whenever the number of available Type 1 WWNs (wwnmType1AvailableWwns) increases to either 25% or 15% or 5% of the maximum number of Type 1 WWNs (wwnmType1MaxWwns) after a wwnmType1WwnShortageNotify notification has been generated for either 20% or 10% or 5% respectively.
                         wwnmTypeOtherWwnShortageNotify 1.3.6.1.4.1.9.9.286.1.2.1.0.3
A WWN shortage notification is generated whenever the number of available Type Other WWNs 'wwnmTypeOtherAvailableWwns' reduces to either 20% or 10% or 0% of the maximum number of Type Other WWNs 'wwnmTypeOtherMaxWwns'. After a shortage event is generated for a threshhold (say 20%), another such event will not be generated until after an availability event (see wwnmType1WwnAvailableNotify) is generated for the same threshold.
                         wwnmTypeOtherWwnAvailableNotify 1.3.6.1.4.1.9.9.286.1.2.1.0.4
An availability notification is generated whenever the number of available Type Other WWNs (wwnmTypeOtherAvailableWwns) increases to either 25% or 15% or 5% of the maximum number of Type Other WWNs (wwnmTypeOtherMaxWwns) after a wwnmTypeOtherWwnShortageNotify notification has been generated for either 20% or 10% or 5% respectively.
         ciscoWwnmMIBConformance 1.3.6.1.4.1.9.9.286.2
             ciscoWwnmMIBCompliances 1.3.6.1.4.1.9.9.286.2.1
                 ciscoWwnmMIBCompliance 1.3.6.1.4.1.9.9.286.2.1.1
The compliance statement for entities which implement the CISCO-WWNMGR-MIB.
                 ciscoWwnmMIBCompliance1 1.3.6.1.4.1.9.9.286.2.1.2
The compliance statement for entities which implement the CISCO-WWNMGR-MIB.
             ciscoWwnmMIBGroups 1.3.6.1.4.1.9.9.286.2.2
                 cwmWwnmConfigurationGroup 1.3.6.1.4.1.9.9.286.2.2.6
A collection of objects for WWN Manager.
                 cwmWwnmNotificationGroup 1.3.6.1.4.1.9.9.286.2.2.8
A collection of notifications for the WWN assignment.
                 cwmWwnmVsanWwnGroup 1.3.6.1.4.1.9.9.286.2.2.9
A collection of objects to represent the configured WWN for the VSANs.