CISCO-MGX82XX-PXM-CLOCK-MIB: View SNMP OID List / Download MIB

VENDOR: STRATACOM


 Home MIB: CISCO-MGX82XX-PXM-CLOCK-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, BASIS-MIB, CISCOWAN-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
     pxmClockConfig 1.3.6.1.4.1.351.110.3.16
           pxmPrimaryMuxClockSource 1.3.6.1.4.1.351.110.3.16.1 cmpclocksourcetype read-only
This object identifies the source of the Primary Mux Clock for PXM card.
           pxmPrimaryInbandClockSourceLineNumber 1.3.6.1.4.1.351.110.3.16.2 integer32 read-only
This object indicates the inband line number. This is applicable when pxmPrimaryMuxClockSource is pxmInbandClock1(1) or pxmServiceModuleClock2 (5).
           pxmPrimarySMClockSourceSlotNumber 1.3.6.1.4.1.351.110.3.16.3 integer32 read-only
This object indicates the service module slot number. This is applicable when pxmPrimaryMuxClockSource is pxmServiceModuleClock1(2) or pxmServiceModuleClock2(6).
           pxmSecondaryMuxClockSource 1.3.6.1.4.1.351.110.3.16.4 cmpclocksourcetype read-only
This object identifies the source of the Secondary Mux Clock for PXM card.
           pxmSecondaryInbandClockSourceLineNumber 1.3.6.1.4.1.351.110.3.16.5 integer32 read-only
This object indicates the inband line number. This is applicable when pxmSecondaryMuxClockSource is pxmInbandClock1(1) or pxmServiceModuleClock2 (5).
           pxmSecondarySMClockSourceSlotNumber 1.3.6.1.4.1.351.110.3.16.6 integer32 read-only
This object indicates the service module slot number. This is applicable when pxmSecondaryMuxClockSource is pxmServiceModuleClock1(2) or pxmServiceModuleClock2(6).
           pxmCurrentClock 1.3.6.1.4.1.351.110.3.16.7 cmpcurrentclock read-only
This object represents the clock source currently selected for PXM card. primary(1): The primary clock source is described by pxmPrimaryMuxClockSource secondary(2): The secondary clock source is described by pxmSecondaryMuxClockSource. intOscillator(3): Current clock is internal oscillator.
           pxmPreviousClock 1.3.6.1.4.1.351.110.3.16.8 cmpcurrentclock read-only
This object represents the clock source previously selected for PXM card.
           pxmExtClockPresent 1.3.6.1.4.1.351.110.3.16.9 cmpclockexistence read-only
Status of External T1/E1 Clock on PXM card.
           pxmExtClkSrcImpedance 1.3.6.1.4.1.351.110.3.16.10 cmpclockimpedance read-only
Impedance on external clock input for PXM card.
           pxmExtClkConnectorType 1.3.6.1.4.1.351.110.3.16.11 cmpclockconnectortype read-only
This object describes the type of connector available for connecting the external clock source to the PXM.
           pxmClkStratumLevel 1.3.6.1.4.1.351.110.3.16.12 integer read-only
This object describes the lowest stratum level provided by the interface the external clock source to the PXM back card. Enumeration: 'stratumLevel3E': 4, 'stratumLevel3': 5, 'stratumLevel2': 3, 'stratumLevel1': 2, 'stratumLevel4E': 7, 'stratumLevel4': 6, 'stratumUnknown': 1.
           pxmClkErrReason 1.3.6.1.4.1.351.110.3.16.13 integer read-only
This object gives more information about clock status. The possible values are : goodClk(1) : Clock is good unkownReason(2) : reason not known noClkSignal(3) : Loss of signal(LOS) on clock source freqTooHigh(4) : frequency drifted too high freqTooLow(5) : frequency drifted too low excessiveJitter(6) : jitter has exceeded the tolerance missingCard (7) : no clock hardware found missingLogicalIf(8): Logical Interface missing or not operational noClock (9): No clock. Enumeration: 'missingLogicalIf': 8, 'goodClk': 1, 'unknownReason': 2, 'noClkSignal': 3, 'excessiveJitter': 6, 'missingCard': 7, 'freqTooLow': 5, 'noClock': 9, 'freqTooHigh': 4.
           pxmExtClock2Present 1.3.6.1.4.1.351.110.3.16.14 cmpclockexistence read-only
This object indicates the status of external T1/E1 Clock on port 2 of PXMUI-S3 back card.
           pxmExtClk2SrcImpedance 1.3.6.1.4.1.351.110.3.16.15 cmpclockimpedance read-only
This object provides the impedance on external clock input on port 2 of PXMUI-S3 back card.
           pxmExtClk2ConnectorType 1.3.6.1.4.1.351.110.3.16.16 cmpclockconnectortype read-only
This object describes the type of connector available for connecting the external clock source to the port 2 of PXM-UI-S3 back card of PXM.
 ciscoMgx82xxPxmClockMIB 1.3.6.1.4.1.351.150.72
The MIB module to describe the clock configuration in Processor Switch Module(PXM) in MGX82xx product. Back cards supported for PXM1: PXM-UI : T1 Clock port, E1 Clock Port PXM-UI-S3 : External Clock1 for T1/E1 Clock input.
       cmpClockMIBConformance 1.3.6.1.4.1.351.150.72.2
           cmpClockMIBGroups 1.3.6.1.4.1.351.150.72.2.1
               cmpClockInfoGroup 1.3.6.1.4.1.351.150.72.2.1.1
The collection of objects which are used for providing information on PXM Clock configuration.
               cmpPrimaryClockInfoGroup 1.3.6.1.4.1.351.150.72.2.1.2
The collection of objects which are used for providing information on Primary Clock configuration.
               cmpSecondaryClockInfoGroup 1.3.6.1.4.1.351.150.72.2.1.3
The collection of objects which are used for providing information on Secondary Clock configuration.
               cmpExtClockInfoGroup 1.3.6.1.4.1.351.150.72.2.1.4
The collection of objects which are used for providing general information on PXM Clock configuration.
           cmpClockMIBCompliances 1.3.6.1.4.1.351.150.72.2.2
               cmpClockCompliance 1.3.6.1.4.1.351.150.72.2.2.1
The compliance statement for objects related to PXM Clock mib.