CISCO-IP-RAN-BACKHAUL-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-IP-RAN-BACKHAUL-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, CISCO-SMI, PerfHist-TC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoIpRanBackHaulMIB 1.3.6.1.4.1.9.9.483
This MIB provides information on the IP-RAN traffic from cell site to aggregation site in the following situations. In an GSM environment the cell site will be the Base station Transceiver System(BTS) and the aggregation site will be the Base Station Controller(BSC). In the UMTS environment the cell site will be the B-Node and the aggregation site will Radio Network Controller(RNC). There are two typical type backhaul, also know as longhaul, links. The traditional backhaul connection consists of a PPP multilink containing two or more E1 or T1 links or ATM or ATM/IMA. The alternate backhaul is traffic transported using IP cloud. Simple back-to-back configuration --------------------------------- This setup consists of two devices that support a limited number of GSM and UMTS links. They are deployed in pairs and inserted between the existing BTS device and BSC device. BTS site BSC site GSM-Abis GSM-Abis ----|||||||| Backhaul ||||||||---- ----| |---------------| |---- ----| |---------------| |---- |||||||| |||||||| RNC B-Node site RNC UMTS UMTS ----|||||||| Backhaul ||||||||---- ----| |---------------| |---- ----| |---------------| |---- |||||||| |||||||| | | |-----------------------| Alternate backhaul over IP cloud Aggregate node configuration ---------------------------- This configuration consists of one aggregate node located at BSC site and several devices at BTS sites. The aggregate device has a seperate backhaul link to each BTS site. BTS site BSC site Aggregate GSM GSM ----|||||||| Backhaul ||||||||---- ----| |---------------| |---- ----| |---------------| |---- |||||||| | | . | | . . | | . GSM . | | . ----|||||||| Backhaul | |---- ----| |---------------| |---- ----| |---------------| |---- |||||||| |||||||| RNC B-Node UMTS UMTS ----|||||||| Backhaul ||||||||---- ----| |---------------| |---- ----| |---------------| |---- |||||||| | | | Alternate | | | .... | | -------. . | | . IP . | | . Cloud.-----| | . . | | -------. . | | | ...... | | | Backhaul | | UMTS | | | ----|||||||| Backhaul | |---- ----| |---------------| |---- ----| |---------------| |---- |||||||| |||||||| Compression Multiplexing | BSC <---------->|||||||| V ||||||||<---------->BTS . GSM . | |<---->| | . GSM . . A(bis) . | |<---->| | . A(bis) . <---------->|||||||| ||||||||<----------> A A | | ShortHaul BackHaul Multiple E1/T1 Back Haul Links Entries in these tables cannot be created or deleted by the network management system. All entries are created or deleted by the agent. Shorthaul interfaces support the following protocols. Protocol ifType -------- ---------------------------- GSM-Abis propPointToPointSerial(22) UMTS-iub atm(37) UMTS/IMA atmSubInterface(134) aal5(49) ifType.44 = atmIma(107) The following list provides the currently allowed backhaul interfaces types. Additional interfaces types will be added as they are supported. ifType --------------------------- ethernetCsmacd(6) ppp(23) as Multilink bundle pppMultilinkBundle(108) In order to manage the IP-RAN optimization solution, two key factors must be monitored. The first and most important is the amount of traffic sent over the backhaul interface. The second is compression efficiency which has a direct impact amount of traffic placed backhaul link. MIB Structure ------------- The MIB has the following structure. Shorthaul information tables: cirbhInfoTable Shorthaul Alarm Information tables cirbhGsmAlarmTable cirbhUmtsConnectionTable cirbhUmtsAlarmTable Shorthaul statistics tables cirbhStatsTable cirbhErrorsTable(deprecated) cirbhShortHaulHistoryTable(obsolete) cirbhCongestionTable cirbhGsmErrorsTable(replaces cirbhErrorsTable) cirbhUmtsErrorsTable(replaces cirbhErrorsTable) Backhaul information tables cirbhBackHaulTable(obsolete) Backhaul statistics tables cirbhBackHaulHistoryTable(obsolete) cirbhBackHaulStatsTable(obsolete) cirbhBackHaulStatsHistoryTable(deprecated) Abbreviations: A-bis Interface between BSC and BTS AAL2 ATM Adaptation Layer type 2 AAL5 ATM Adaptation Layer type 5 AIM Advanced Interface Module AgNode Aggregation Node ALCAP Access Link Control Application Part AMR Adaptive Multi-Rate speech codec ATM Asynchronous Transfer Mode BCH Broadcast Channel BSC Base Station Controller. BTS Base Station Transceiver System CDF CID Definition Field CID Channel IDentification CPCH Common Packet Channel DCH Dedicated Channel DSCH Downlink Shared Channel DTX Discontinuous Transmission (mechanism) FACH Forward Link Access Channel GSM Global System for Mobile communications IMA Inverse Multiplexing for ATM Iub Node B to RNC interface OC3 Optical Carrier 3 OSF OffSet Field LAPD Link Access Protocol on Dm Channel O&M Operations and Maintenance MLPPP Multi-Link PPP MS Mobile Station (Handset) NBAP Node B Application Part NNI Network to Network Interface Node-B Node B PCH Paging Channel PVC Permanent Virtual Circuit RAN Radio Access Network SVC Switched Virtual Circuit RACH Random Access Channel RNC Radio Network Controller SAR Segment Assembly Reassembly SDC Traffic Channel SDH Signaling Channel SPVC Soft Permanent Virtual Circuit SSCOP Service Specific Connection Oriented Protocol STC Signaling Transport Converter STM-1 Synchronous Transport Module type 1 TRAU Transcoder Unit UMTS Universal Mobile Telecommunications System UNI User to Network Interface USCH Uplink Shared Channel UTRAN UMTS Terrestrial Radio Access Network VCI Virtual Channel Identifier VPI Virtual Path Identifier
         ciscoIpRanBackHaulMIBNotifs 1.3.6.1.4.1.9.9.483.0
             ciscoIpRanBackHaulGsmAlarm 1.3.6.1.4.1.9.9.483.0.1
This notification is generated whenever the values of the specified objects change.
             ciscoIpRanBackHaulUmtsAlarm 1.3.6.1.4.1.9.9.483.0.2
This notification is generated whenever the values of the specified objects change.
             ciscoIpRanBackHaulRcvdUtil 1.3.6.1.4.1.9.9.483.0.3
This notification is generated once for the interval specified by the cirbhBackHaulStatsInterval object for the following state transitions. 'acceptable' -> 'warning' 'acceptable' -> 'overloaded' 'warning' -> 'overloaded' At the end of the interval specified by the cirbhBackHaulUtilInterval object another notification will be generated if the current state is different from state sent in last notification.
             ciscoIpRanBackHaulSentUtil 1.3.6.1.4.1.9.9.483.0.4
This notification is generated once for the interval specified by the cirbhBackHaulStatsInterval object for the following state transitions. 'acceptable' -> 'warning' 'acceptable' -> 'overloaded' 'warning' -> 'overloaded' At the end of the interval specified by the cirbhBackHaulUtilInterval object another notification will be generated if the current state is different from state sent in last notification.
         ciscoIpRanBackHaulMIBObjects 1.3.6.1.4.1.9.9.483.1
             cirbhScalars 1.3.6.1.4.1.9.9.483.1.1
                 cirbhSnmpTrafficMode 1.3.6.1.4.1.9.9.483.1.1.1 integer read-write
This object describes the mode of SNMP traffic for this device in relationship to connectivity to network management station. This will be used to define default behavior for the device based on the on available bandwidth for management. 'undefined' : Traffic mode is not defined. 'inBand' : SNMP traffic uses same physical interfaces as voice traffic. 'outOfBand' : SNMP traffic does not use same physical interfaces as voice traffic. Enumeration: 'outOfBand': 3, 'undefined': 1, 'inBand': 2.
                 cirbhLocation 1.3.6.1.4.1.9.9.483.1.1.2 integer read-write
This object provides information on location of the device to aid in topology display. 'undefined' : not defined. 'aggSite' : Located at Base Station Controller or or Radio Network Controller site. 'cellSite' : Located at Base Station Transceiver System or Node B site. Enumeration: 'aggSite': 2, 'undefined': 1, 'cellSite': 3.
                 cirbhBackHaulStatsInterval 1.3.6.1.4.1.9.9.483.1.1.3 unsigned32 read-write
The length of the interval used to collect statistics in the cirbhBackHaulStatsTable.
                 cirbhBackHaulStatsEntries 1.3.6.1.4.1.9.9.483.1.1.4 unsigned32 read-write
The maximum number of entries in the cirbhBackHaulStatsTable table.
                 cirbhBackHaulAcceptableThreshold 1.3.6.1.4.1.9.9.483.1.1.5 unsigned32 read-write
This object is used to specify a level of traffic below which the instances of the cirbhBackHaulRcvdUtilState and cirbhBackHaulSentUtilState objects are marked as 'acceptable'. All changes to this threshold will take effect at the end of the current interval. The value for this object must be less than the values specified by cirbhBackHaulOverloadedThreshold and cirbhBackHaulWarningThreshold objects.
                 cirbhBackHaulWarningThreshold 1.3.6.1.4.1.9.9.483.1.1.6 unsigned32 read-write
This object is used to specify a level of traffic were the instances of the cirbhBackHaulRcvdUtilState and cirbhBackHaulSentUtilState objects are marked as 'warning'. All changes to this threshold will take effect at the end of the current interval. The value for this object must be greater than the value specified for the cirbhBackHaulAcceptableThreshold object. Also, the value for this object must be less than or equal to value of the cirbhBackHaulOverloadedThreshold object.
                 cirbhBackHaulOverloadedThreshold 1.3.6.1.4.1.9.9.483.1.1.7 unsigned32 read-write
This object is used to specify a level of traffic were the instances of the cirbhBackHaulRcvdUtilState and cirbhBackHaulSentUtilState objects are marked as 'overloaded'. Changes to this threshold will take effect at the end of the current interval. The value for this object must be greater than the value specified for the cirbhBackHaulAcceptableThreshold object. Also, the value for this object must be greater than or equal to value of the cirbhBackHaulWarningThreshold object. This object will be used to determine the state of the cirbhBackHaulRcvdUtilState and cirbhBackHaulSentUtilState objects.
                 cirbhBackHaulUtilInterval 1.3.6.1.4.1.9.9.483.1.1.8 unsigned32 read-write
The length of the interval used to suppress generation of the ciscoIpRanBackHaulRcvdUtil and ciscoIpRanBackHaulSentUtil notifications. Notification will not be suppressed when zero value is specified.
             cirbhObjects 1.3.6.1.4.1.9.9.483.1.2
                 cirbhShortHaul 1.3.6.1.4.1.9.9.483.1.2.1
                     cirbhShortHaulInfo 1.3.6.1.4.1.9.9.483.1.2.1.1
                         cirbhInfoTable 1.3.6.1.4.1.9.9.483.1.2.1.1.1 no-access
This table provides information on interface used to establish shorthaul connection to BTS or BSC or node B site.
                             cirbhInfoTableEntry 1.3.6.1.4.1.9.9.483.1.2.1.1.1.1 no-access
Each entry describes the information used to route GSM and UMTS packets across backhaul for a single GSM or UMTS link.
                                 cirbhInfoProtocol 1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.1 cirbhprotocol read-only
Protocol used to indicate type of shorthaul.
                                 cirbhInfoLocalAddrType 1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.2 inetaddresstype read-only
The type of address specified in the corresponding instance of cirbhConfigLocalIpAddr object.
                                 cirbhInfoLocalAddr 1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.3 inetaddress read-only
The local address used to route traffic across backhaul.
                                 cirbhInfoLocalPortNumber 1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.4 inetportnumber read-only
The local port number used to distinguish traffic from this interface when transported over backhaul connection.
                                 cirbhInfoRemoteAddrType 1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.5 inetaddresstype read-only
The type of address in the in the corresponding instance of the cirbhInfoRemoteAddr object.
                                 cirbhInfoRemoteAddr 1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.6 inetaddress read-only
The remote IP address used to route traffic across backhaul.
                                 cirbhInfoRemotePortNumber 1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.7 inetportnumber read-only
The remote port number used to distinguish traffic from this interface when transported over backhaul connection.
                                 cirbhInfoAdjectSerialNum 1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.8 snmpadminstring read-only
This object provides the serial number of the adjacent device supporting the other side of this shorthaul. This object contains the same value as the corresponding entPhysicalSerialNum object on the adjacent device. The type of object like chassis or module is provided by the cirbhInfoAdjectVendorType object.
                                 cirbhInfoAdjectVendorType 1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.9 autonomoustype read-only
This object provides the vendor type of the adjacent device supporting other end of this shorthaul. This objectcontains the same value as the corresponding entPhysicalVendorType object on the adjacent device.
                                 cirbhInfoBackhaulRxIfIndex 1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.10 interfaceindexorzero read-only
This object provides the ifIndex of the interface used to receive traffic from destination.
                                 cirbhInfoBackhaulTxIfIndex 1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.11 interfaceindexorzero read-only
This object provides the ifIndex of the interface used to sent traffic to destination.
                                 cirbhInfoShBulkLastIndex 1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.12 cirbhhistoryindex read-only
The latest value of the cirbhShortHaulBulkHistory object from the cirbhShortHaulBulkHistory table.
                                 cirbhInfoOptimizeTraffic 1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.13 truthvalue read-only
This object indicate whether the traffic received and sent for this shorthaul interface is optimized.
                     cirbhShortHaulAlarmInfo 1.3.6.1.4.1.9.9.483.1.2.1.2
                         cirbhGsmAlarmTable 1.3.6.1.4.1.9.9.483.1.2.1.2.1 no-access
This table provides alarm information for GSM-Abis interfaces.
                             cirbhGsmAlarmTableEntry 1.3.6.1.4.1.9.9.483.1.2.1.2.1.1 no-access
Each entry represents the set of alarms that apply to GSM interface.
                                 cirbhGsmAlarmConnectState 1.3.6.1.4.1.9.9.483.1.2.1.2.1.1.1 cirbhconnectgsmstate read-only
The state of the connection for GSM interface.
                                 cirbhGsmAlarmLocalState 1.3.6.1.4.1.9.9.483.1.2.1.2.1.1.2 cirbhalarmstate read-only
The local alarm state.
                                 cirbhGsmAlarmRemoteState 1.3.6.1.4.1.9.9.483.1.2.1.2.1.1.3 cirbhalarmstate read-only
The remote alarm state.
                                 cirbhGsmAlarmRedundancyState 1.3.6.1.4.1.9.9.483.1.2.1.2.1.1.4 cirbhredundancystate read-only
The redundancy state of the interface
                         cirbhUmtsConnectionTable 1.3.6.1.4.1.9.9.483.1.2.1.2.2 no-access
This table provides information associated with UMTS connection between BTS and BSC.
                             cirbhUmtsConnectionTableEntry 1.3.6.1.4.1.9.9.483.1.2.1.2.2.1 no-access
Each Entry represents the set of alarms that apply to UMTS interfaces.
                                 cirbhUmtsConnectionState 1.3.6.1.4.1.9.9.483.1.2.1.2.2.1.1 cirbhconnectumtsstate read-only
The state of the connection between the UMTS interfaces.
                                 cirbhUmtsConnectionRedundState 1.3.6.1.4.1.9.9.483.1.2.1.2.2.1.2 cirbhredundancystate read-only
The redundancy state of the interface.
                                 cirbhUmtsConnectionRootIfIndex 1.3.6.1.4.1.9.9.483.1.2.1.2.2.1.3 interfaceindexorzero read-only
The root interface used to transport and receive UMTS traffic as follows. ATM: ATM0/0.0-aal5 layer -> ATM0/0-atm layer. IMA ATM0/IMA0.1-aal5 layer -> ATM0/IMA0
                         cirbhUmtsAlarmTable 1.3.6.1.4.1.9.9.483.1.2.1.2.3 no-access
This table provides information on alarm states for UMTS-ATM interfaces.
                             cirbhUmtsAlarmTableEntry 1.3.6.1.4.1.9.9.483.1.2.1.2.3.1 no-access
Each entry provides information about the alarms for each ATM interface used to configure the shorthaul UMTS interface.
                                 cirbhUmtsAlarmRxLocalState 1.3.6.1.4.1.9.9.483.1.2.1.2.3.1.1 cirbhalarmstate read-only
The local receive alarm state.
                                 cirbhUmtsAlarmRxRemoteState 1.3.6.1.4.1.9.9.483.1.2.1.2.3.1.2 cirbhalarmstate read-only
The remote receive alarm state.
                                 cirbhUmtsAlarmTxLocalState 1.3.6.1.4.1.9.9.483.1.2.1.2.3.1.3 cirbhalarmstate read-only
The local transmit alarm state.
                                 cirbhUmtsAlarmTxRemoteState 1.3.6.1.4.1.9.9.483.1.2.1.2.3.1.4 cirbhalarmstate read-only
The remote transmit alarm state.
                     cirbhShortHaulStats 1.3.6.1.4.1.9.9.483.1.2.1.3
                         cirbhStatsTable 1.3.6.1.4.1.9.9.483.1.2.1.3.1 no-access
This table provides measurements on bytes and packets sent or received on a per interface basis. It is important to note that this table shares the same index with the cirbhInfoTable table the ifIndex can be used to associate information from both tables.
                             cirbhStatsTableEntry 1.3.6.1.4.1.9.9.483.1.2.1.3.1.1 no-access
This entry provides measurements on shorthaul interfaces to allow compression efficency to be calculated.
                                 cirbhStatsRcvdSamples 1.3.6.1.4.1.9.9.483.1.2.1.3.1.1.1 counter32 read-only
For GSM-Abis interfaces, the count of samples received on interface. For UMTS interfaces, the number of packets received on interface.
                                 cirbhStatsSentSamples 1.3.6.1.4.1.9.9.483.1.2.1.3.1.1.2 counter32 read-only
For GSM-Abis interfaces, the count of samples sent on interface. For UMTS interfaces, the number of packets sent on this interface.
                                 cirbhStatsRcvdBackHaulPackets 1.3.6.1.4.1.9.9.483.1.2.1.3.1.1.3 counter32 read-only
The count of packets received from backhaul that contained data for this interface.
                                 cirbhStatsSentBackHaulPackets 1.3.6.1.4.1.9.9.483.1.2.1.3.1.1.4 counter32 read-only
The count of packets transmitted on backhaul that contained data from this interface.
                                 cirbhStatsRcvdBackHaulBytes 1.3.6.1.4.1.9.9.483.1.2.1.3.1.1.5 counter32 read-only
The count of bytes received from backhaul that contained data for this interface.
                                 cirbhStatsSentBackHaulBytes 1.3.6.1.4.1.9.9.483.1.2.1.3.1.1.6 counter32 read-only
The count of bytes transmitted on backhaul that contained data from this interface.
                         cirbhErrorsTable 1.3.6.1.4.1.9.9.483.1.2.1.3.2 no-access
This table provides information on the errors that can be encountered during the compression and decompression of UMTS and GSM-Abis traffic. UMTS ------------------- | GSM Links -------- --------------| | IP based Multi-link(backhaul) --------------| |----------------------------- --------------| |----------------------------- --------
                             cirbhErrorsTableEntry 1.3.6.1.4.1.9.9.483.1.2.1.3.2.1 no-access
Each entry provides account of various types of errors encountered on GSM and UMTS interfaces.
                                 cirbhErrorsBhPeerNotReadyDrops 1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.1 counter32 read-only
The count of packets dropped on backhaul because peer was not ready.
                                 cirbhErrorsBhPeerNotActiveDrops 1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.2 counter32 read-only
The count of packets dropped on backhaul because peer was reachable but not in active state.
                                 cirbhErrorsBhInvalidPackets 1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.3 counter32 read-only
The number of backhaul packets that were received and dropped because they contained invalid information.
                                 cirbhErrorsBhLostRcvdPackets 1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.4 counter32 read-only
The number of backhaul packets expected to be received but never arrived.
                                 cirbhErrorsBhLostSentPackets 1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.5 counter32 read-only
The number of backhaul packets sent but never were received by peer.
                                 cirbhErrorsBhMissedPackets 1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.6 counter32 read-only
The value of this object is the sum total of the values of the corresponding instances of the following objects: cirbhErrorsBhMissedLatePackets cirbhErrorsBhMissedLostPackets cirbhErrorsBhMissedNoMemPackets cirbhErrorsBhMissedResetPackets
                                 cirbhErrorsBhMissedLatePackets 1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.7 counter32 read-only
The number of packets missed on backhaul because they arrived past the allowed time frame.
                                 cirbhErrorsBhMissedLostPackets 1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.8 counter32 read-only
The number of packets missed on backhaul because they were lost on backhaul.
                                 cirbhErrorsBhMissedNoMemPackets 1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.9 counter32 read-only
The number of packets missed on backhaul for lack of available memory to allocate packet.
                                 cirbhErrorsBhMissedResetPackets 1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.10 counter32 read-only
The number of packets missed on backhaul because the of a reset event.
                                 cirbhErrorsDecompFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.11 counter32 read-only
The number of times information contained in packet could not be decompressed.
                                 cirbhErrorsCompFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.12 counter32 read-only
The number of times the information contained in the packet could not be compressed. This counter is incremented for all types of compression errors.
                                 cirbhErrorsCompNoPacketFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.13 counter32 read-only
The number of times compression failed because packet was unavailable.
                                 cirbhErrorsCompNoIntFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.14 counter32 read-only
The number of times compression failed because route to peer was not available.
                                 cirbhErrorsCompIntDownFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.15 counter32 read-only
The number of times compression failed because interface was down.
                                 cirbhErrorsCompEncapFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.16 counter32 read-only
The number of times compression failed because of encapsulation errors.
                                 cirbhErrorsCompQosDrops 1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.17 counter32 read-only
The number of times compression failed because of quality of service errors or traffic load.
                         cirbhShortHaulHistoryTable 1.3.6.1.4.1.9.9.483.1.2.1.3.3 no-access
This table provides historical information on the amount of backhaul traffic contributed by each interface.
                             cirbhShortHaulHistoryTableEntry 1.3.6.1.4.1.9.9.483.1.2.1.3.3.1 no-access
Each entry represents the average traffic for last second. Each entry provides information on traffic rates for raw and compressed data.
                                 cirbhShortHaulHistory 1.3.6.1.4.1.9.9.483.1.2.1.3.3.1.1 cirbhhistoryindex no-access
An index used to access history of cirbhShortHaulHistoryTable objects.
                                 cirbhShortHaulRcvdRate 1.3.6.1.4.1.9.9.483.1.2.1.3.3.1.2 cirbhrawinterfacerate read-only
The rate of traffic received from this interface to be sent on backhaul prior to compression.
                                 cirbhShortHaulSentRate 1.3.6.1.4.1.9.9.483.1.2.1.3.3.1.3 cirbhrawinterfacerate read-only
The rate of traffic sent out from this interface after traffic was decompressed.
                                 cirbhShortHaulRcvdCompressRate 1.3.6.1.4.1.9.9.483.1.2.1.3.3.1.4 cirbhcommpressinterfacerate read-only
The rate of traffic received into this interface to be sent on backhaul after compression.
                                 cirbhShortHaulSentCompressRate 1.3.6.1.4.1.9.9.483.1.2.1.3.3.1.5 cirbhcommpressinterfacerate read-only
The rate of traffic received from backhaul and prior to decompression.
                                 cirbhShortHaulTimeStamp 1.3.6.1.4.1.9.9.483.1.2.1.3.3.1.6 timestamp read-only
Time when sample was collected.
                                 cirbhShortHaulRcvdUtilization 1.3.6.1.4.1.9.9.483.1.2.1.3.3.1.7 cirbhshorthaulutilization read-only
Amount of traffic that was receive from backhaul before decompression express as load on E1 or T1.
                                 cirbhShortHaulSentUtilization 1.3.6.1.4.1.9.9.483.1.2.1.3.3.1.8 cirbhshorthaulutilization read-only
Amount of traffic that was send on after compression express as load on E1 or T1.
                         cirbhCongestionTable 1.3.6.1.4.1.9.9.483.1.2.1.3.4 no-access
This table provides information on congestion mechanism for shorthaul interfaces.
                             cirbhCongestionTableEntry 1.3.6.1.4.1.9.9.483.1.2.1.3.4.1 no-access
Each entry represents single shorthaul interface.
                                 cirbhCongestionEnabled 1.3.6.1.4.1.9.9.483.1.2.1.3.4.1.1 truthvalue read-only
This object indicates congestion mechanisms have been enabled for shorthaul interface.
                                 cirbhCongestionDrops 1.3.6.1.4.1.9.9.483.1.2.1.3.4.1.2 counter32 read-only
This object provide the number packets or cells that were dropped due to congestion. When the cirbhInfoProtocol is 'gsmAbis' object indicates the number of packets dropped. When the cirbhInfoProtocol is 'umtsIub' object indicates the number of cells dropped.
                                 cirbhCongestionDroppedBytes 1.3.6.1.4.1.9.9.483.1.2.1.3.4.1.3 counter32 read-only
The number of bytes dropped due to congestion control mechanisms.
                                 cirbhCongestionEvents 1.3.6.1.4.1.9.9.483.1.2.1.3.4.1.4 counter32 read-only
The number of times congestion mechanism was engaged.
                                 cirbhCongestionActive 1.3.6.1.4.1.9.9.483.1.2.1.3.4.1.5 truthvalue read-only
This object indicates whether congestion mechanism is active.
                                 cirbhCongestionDuration 1.3.6.1.4.1.9.9.483.1.2.1.3.4.1.6 counter32 read-only
This object provides number of seconds interface was congested.
                         cirbhGsmErrorsTable 1.3.6.1.4.1.9.9.483.1.2.1.3.5 no-access
This table provides information on the errors that can be encountered during the compression and decompression of GSM-Abis traffic.
                             cirbhGsmErrorsTableEntry 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1 no-access
Each entry represents single shorthaul interface.
                                 cirbhGsmErrorsPeerNotReadyDrops 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.1 counter32 read-only
The count of packets dropped on backhaul because peer was not ready.
                                 cirbhGsmErrorsPeerNotActiveDrops 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.2 counter32 read-only
The count of packets dropped on backhaul because peer was reachable but not in active state.
                                 cirbhGsmErrorsInvalidPackets 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.3 counter32 read-only
The number of backhaul packets that were received and dropped because they contained invalid information.
                                 cirbhGsmErrorsLostRcvdPackets 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.4 counter32 read-only
The number of backhaul packets expected to be received but never arrived.
                                 cirbhGsmErrorsLostSentPackets 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.5 counter32 read-only
The number of backhaul packets sent but never were received by peer.
                                 cirbhGsmErrorsMissedPackets 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.6 counter32 read-only
The value of this object is the sum total of the values of the corresponding instances of the following objects: cirbhGsmErrorsMissedLatePackets cirbhGsmErrorsMissedLostPackets cirbhGsmErrorsMissedNoMemPackets cirbhGsmErrorsMissedResetPackets
                                 cirbhGsmErrorsMissedLatePackets 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.7 counter32 read-only
The number of packets missed on backhaul because they arrived past the allowed time frame.
                                 cirbhGsmErrorsMissedLostPackets 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.8 counter32 read-only
The number of packets missed on backhaul because they were lost on backhaul.
                                 cirbhGsmErrorsMissedNoMemPackets 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.9 counter32 read-only
The number of packets missed on backhaul for lack of available memory to allocate packet.
                                 cirbhGsmErrorsMissedResetPackets 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.10 counter32 read-only
The number of packets missed on backhaul because the of a reset event.
                                 cirbhGsmErrorsDecompFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.11 counter32 read-only
The number of times information contained in packet could not be decompressed.
                                 cirbhGsmErrorsCompFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.12 counter32 read-only
The number of times the information contained in the packet could not be compressed.
                                 cirbhGsmErrorsCompNoPacketFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.13 counter32 read-only
The number of times compression failed because packet was unavailable.
                                 cirbhGsmErrorsCompNoIntFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.14 counter32 read-only
The number of times compression failed because route to peer was not available.
                                 cirbhGsmErrorsCompIntDownFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.15 counter32 read-only
The number of times compression failed because interface was down.
                                 cirbhGsmErrorsCompEncapFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.16 counter32 read-only
The number of times compression failed because of encapsulation errors.
                                 cirbhGsmErrorsCompQosDrops 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.17 counter32 read-only
The number of times compression failed because of quality of service errors or traffic load.
                                 cirbhGsmErrorsFastSendFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.18 counter32 read-only
Fast send failures.
                                 cirbhGsmErrorsTxPacketFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.19 counter32 read-only
Unable to transmit GSM packet.
                                 cirbhGsmErrorsTxNoBuffers 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.20 counter32 read-only
Unable to allocate buffer for transmission.
                                 cirbhGsmErrorsTxResets 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.21 counter32 read-only
Transmission interface resets.
                                 cirbhGsmErrorsOverruns 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.22 counter32 read-only
Packet was missed because backhaul jitter buffer was ran out of available space.
                                 cirbhGsmErrorsInterruptFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.23 counter32 read-only
Packet was lost because of interrupt failure.
                                 cirbhGsmErrorsLateArrivals 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.24 counter32 read-only
Count of GSM packets that arrived later than the allowed time.
                                 cirbhGsmErrorsEarlyArrivals 1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.25 counter32 read-only
Count of GSM packets that arrived earlier than the allowed time.
                         cirbhUmtsErrorsTable 1.3.6.1.4.1.9.9.483.1.2.1.3.6 no-access
This table provides information on the errors that can be encountered during the compression and decompression of UMTS-Iub traffic.
                             cirbhUmtsErrorsTableEntry 1.3.6.1.4.1.9.9.483.1.2.1.3.6.1 no-access
Each entry represents single shorthaul interface.
                                 cirbhUmtsErrorsPeerNotReadyDrops 1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.1 counter32 read-only
The count of packets dropped on backhaul because peer was not ready.
                                 cirbhUmtsErrorsInvalidPackets 1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.2 counter32 read-only
The number of backhaul packets that were received and dropped because they contained invalid information.
                                 cirbhUmtsErrorsDecompFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.3 counter32 read-only
The number of times information contained in packet could not be decompressed.
                                 cirbhUmtsErrorsCompFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.4 counter32 read-only
The number of times the information contained int the packet could not be compressed.
                                 cirbhUmtsErrorsCompNoPacketFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.5 counter32 read-only
The number of times compression failed because packet was unavailable.
                                 cirbhUmtsErrorsCompNoIntFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.6 counter32 read-only
The number of times compression failed because route to peer was not available.
                                 cirbhUmtsErrorsCompIntDownFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.7 counter32 read-only
The number of times compression failed because interface was down.
                                 cirbhUmtsErrorsCompEncapFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.8 counter32 read-only
The number of times compression failed because of encapsulation errors.
                                 cirbhUmtsErrorsCompQosDrops 1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.9 counter32 read-only
The number of times compression failed because of quality of service errors or traffic load.
                                 cirbhUmtsErrorsShorthaulPakFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.10 counter32 read-only
Unable to allocate packet used to send data on shorthaul interface.
                                 cirbhUmtsErrorsUmtsEncapFailures 1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.11 counter32 read-only
The UMTS encapsulate failures.
                                 cirbhUmtsErrorsLocalPvcDrops 1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.12 counter32 read-only
Packet dropped because local PVC was unavailable.
                                 cirbhUmtsErrorsRemotePvcDrops 1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.13 counter32 read-only
Packet dropped because remote PVC was unavailable.
                                 cirbhUmtsErrorsBackhaulDrops 1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.14 counter32 read-only
Packets dropped on backhaul.
                         cirbhShortHaulBulkTable 1.3.6.1.4.1.9.9.483.1.2.1.3.7 no-access
This table provides historical information on the amount of backhaul traffic contributed by each interface.
                             cirbhShortHaulBulkTableEntry 1.3.6.1.4.1.9.9.483.1.2.1.3.7.1 no-access
Each entry represents the average traffic for last second. Each entry provides information on traffic rates for raw and compressed data.
                                 cirbhShortHaulBulkHistory 1.3.6.1.4.1.9.9.483.1.2.1.3.7.1.1 cirbhhistoryindex no-access
An index used to access history of cirbhShortHaulBulkDataTable objects.
                                 cirbhShortHaulBulkTimeStamp 1.3.6.1.4.1.9.9.483.1.2.1.3.7.1.2 timestamp read-only
Time when sample was collected.
                                 cirbhShortHaulBulkBaseUnit 1.3.6.1.4.1.9.9.483.1.2.1.3.7.1.3 unsigned32 read-only
The Base Unit is an integer used to provide a range of bytes rates provided in the cirbhShortHaulBulkUtil object. All values in the cirbhShortHaulBulkUtil object share the same base unit.
                                 cirbhShortHaulBulkUtil 1.3.6.1.4.1.9.9.483.1.2.1.3.7.1.4 octet string read-only
This object provides the amount of traffic transmitted in a particular shorthaul. The object contains 1 to 128 pairs. The length of the octet string can be used to calculate number of pairs. The information is in the following format were each rate is stored as single byte. [rx,tx] * 128 The approximated rate can be calculated by multiplying value from cirbhShortHaulBulkUtil times value in the cirbhShortHaulBulkBaseUnit.
                 cirbhBackHaul 1.3.6.1.4.1.9.9.483.1.2.2
                     cirbhBackHaulInfo 1.3.6.1.4.1.9.9.483.1.2.2.1
                         cirbhBackHaulTable 1.3.6.1.4.1.9.9.483.1.2.2.1.1 no-access
This table provides information on backHaul links.
                             cirbhBackHaulEntry 1.3.6.1.4.1.9.9.483.1.2.2.1.1.1 no-access
Each entry represents a backhaul link between BSC and a particular BTS site.
                                 cirbhBackHaulAdjectSerialNum 1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.1 snmpadminstring read-only
This object provides the serial number of the adjacent device supporting the backhaul connection. This object contains the same value as the corresponding entPhysicalSerialNum object. The type of object like chassis or module is provided by the cirbhBackHaulAdjectVendorType object.
                                 cirbhBackHaulAdjectVendorType 1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.2 autonomoustype read-only
This object provides the vendor type of the adjacent device supporting backhaul connection. This object contains the same value as the corresponding entPhysicalVendorType object.
                                 cirbhBackHaulRcvdUtilState 1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.3 cirbhbackhaulutilizationstate read-only
The utilization state for traffic received on backhaul multilink. The following objects will be used to calculate link utilization state: cirbhBackHaulAcceptableThreshold cirbhBackHaulWarningThreshold cirbhBackHaulOverloadedThreshold
                                 cirbhBackHaulSentUtilState 1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.4 cirbhbackhaulutilizationstate read-only
The utilization state for traffic transmitted on backhaul multilink. The following objects will be used to calculate link utilization state: cirbhBackHaulAcceptableThreshold cirbhBackHaulWarningThreshold cirbhBackHaulOverloadedThreshold
                                 cirbhBackHaulRcvdUtil 1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.5 cirbhbackhaulutilization read-only
The average receive utilization of the link over the last second.
                                 cirbhBackHaulSentUtil 1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.6 cirbhbackhaulutilization read-only
The average transmit utilization of the link over the last second.
                         cirbhBackHaulShortHaulTable 1.3.6.1.4.1.9.9.483.1.2.2.1.2 no-access
This table lists the associations between shorthaul and backhaul interfaces.
                             cirbhBackHaulShortHaulEntry 1.3.6.1.4.1.9.9.483.1.2.2.1.2.1 no-access
An entry indicates a single association between a backhaul and shorthaul interface.
                                 cirbhBackHaulShortHaulBhIndex 1.3.6.1.4.1.9.9.483.1.2.2.1.2.1.1 interfaceindex no-access
This object indicates the backhaul interface.
                                 cirbhBackHaulShortHaulShIndex 1.3.6.1.4.1.9.9.483.1.2.2.1.2.1.2 interfaceindex no-access
This object indicates the shorthaul interface.
                                 cirbhBackHaulShortHaulTimestamp 1.3.6.1.4.1.9.9.483.1.2.2.1.2.1.3 timestamp read-only
This object indicates the value of sysUpTime when the entry was created.
                     cirbhBackHaulStats 1.3.6.1.4.1.9.9.483.1.2.2.2
                         cirbhBackHaulHistoryTable 1.3.6.1.4.1.9.9.483.1.2.2.2.1 no-access
This table provides historical information on traffic distribution on backhaul interface.
                             cirbhBackHaulHistoryEntry 1.3.6.1.4.1.9.9.483.1.2.2.2.1.1 no-access
Each entry provides information on the utilization of backhaul interface. The utilization is broken down by protocol and by direction. An entry is updated in this table every second.
                                 cirbhBackHaulHistoryIndex 1.3.6.1.4.1.9.9.483.1.2.2.2.1.1.1 cirbhhistoryindex no-access
An index used to access history of cirbhBackHaulHistoryTable objects.
                                 cirbhBackHaulHistoryRcvdUtil 1.3.6.1.4.1.9.9.483.1.2.2.2.1.1.2 cirbhbackhaulutilization read-only
The average receive utilization of link over the last second.
                                 cirbhBackHaulHistorySentUtil 1.3.6.1.4.1.9.9.483.1.2.2.2.1.1.3 cirbhbackhaulutilization read-only
The average transmit utilization of link over the last second.
                                 cirbhBackHaulHistoryRcvdAbisUtil 1.3.6.1.4.1.9.9.483.1.2.2.2.1.1.4 cirbhbackhaulutilization read-only
The average receive utilization of link over the last second that consisted of GSM-Abis traffic.
                                 cirbhBackHaulHistorySentAbisUtil 1.3.6.1.4.1.9.9.483.1.2.2.2.1.1.5 cirbhbackhaulutilization read-only
The average transmit utilization of link over the last second that consisted of GSM-Abis traffic.
                                 cirbhBackHaulHistoryRcvdUmtsUtil 1.3.6.1.4.1.9.9.483.1.2.2.2.1.1.6 cirbhbackhaulutilization read-only
The average receive utilization of link over the last second that consisted of UMTS traffic.
                                 cirbhBackHaulHistorySentUmtsUtil 1.3.6.1.4.1.9.9.483.1.2.2.2.1.1.7 cirbhbackhaulutilization read-only
The average transmit utilization of link over the last second that consisted of UMTS traffic.
                                 cirbhBackHaulHistoryTimeStamp 1.3.6.1.4.1.9.9.483.1.2.2.2.1.1.8 timestamp read-only
Time when sample was collected.
                         cirbhBackHaulStatsTable 1.3.6.1.4.1.9.9.483.1.2.2.2.2 no-access
This table provides current information on the utilization of backhaul interface. One second load samples are collected and the corresponding entry is incremented. The provides a distribution of the traffic load. At the end of an interval the information is collected and used to populate entry in the cirbhBackHaulStatsHistoryTable. The interval is specified by the cirbhBackHaulStatsInterval object. The counters in this table increase until the interval ends at which time they are reset.
                             cirbhBackHaulStatsEntry 1.3.6.1.4.1.9.9.483.1.2.2.2.2.1 no-access
Each entry contains the distribution of traffic in the current window specified by the cirbhBackHaulStatsInterval object.
                                 cirbhStatsDirection 1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.1 cirbhtrafficdirection no-access
The direction of traffic on backhaul.
                                 cirbhStatsTrafficType 1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.2 cirbhtraffictype no-access
The type of traffic.
                                 cirbhStats000to009Seconds 1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.3 perfcurrentcount read-only
The total numbers of seconds during which the backhaul link was utilized from 0 to 9 percent.
                                 cirbhStats010to019Seconds 1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.4 perfcurrentcount read-only
The total numbers of seconds during which the backhaul link was utilized from 10 to 19 percent.
                                 cirbhStats020to029Seconds 1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.5 perfcurrentcount read-only
The total numbers of seconds during which the backhaul link was utilized from 20 to 29 percent.
                                 cirbhStats030to039Seconds 1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.6 perfcurrentcount read-only
The total numbers of seconds during which the backhaul link was utilized from 30 to 39 percent.
                                 cirbhStats040to049Seconds 1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.7 perfcurrentcount read-only
The total numbers of seconds during which the backhaul link was utilized from 40 to 49 percent.
                                 cirbhStats050to059Seconds 1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.8 perfcurrentcount read-only
The total numbers of seconds during which the backhaul link was utilized from 50 to 59 percent.
                                 cirbhStats060to069Seconds 1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.9 perfcurrentcount read-only
The total numbers of seconds during which the backhaul link was utilized from 60 to 69 percent.
                                 cirbhStats070to079Seconds 1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.10 perfcurrentcount read-only
The total numbers of seconds during which the backhaul link was utilized from 70 to 79 percent.
                                 cirbhStats080to089Seconds 1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.11 perfcurrentcount read-only
The total numbers of seconds during which the backhaul link was utilized from 80 to 89 percent.
                                 cirbhStats090to100Seconds 1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.12 perfcurrentcount read-only
The total numbers of seconds during which the backhaul link was utilized from 90 to 100 percent.
                                 cirbhStatsTimeStamp 1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.13 timestamp read-only
Time when sample was collected.
                                 cirbhStatsMaxUtilization 1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.14 cirbhbackhaulutilization read-only
The maximum utilization encountered within interval.
                                 cirbhStatsMaxTimeStamp 1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.15 timestamp read-only
Time when cirbhStatsMaxUtilization was recorded.
                 cirbhBackHaulStatsHistoryTable 1.3.6.1.4.1.9.9.483.1.2.12 no-access
This table provides historical information of distribution of load on backhaul interfaces.
                       cirbhBackHaulStatsHistoryEntry 1.3.6.1.4.1.9.9.483.1.2.12.1 no-access
Each entry in this table is the data collected from the cirbhBackHaulStatsTable table.
                           cirbhStatsHistoryIndex 1.3.6.1.4.1.9.9.483.1.2.12.1.1 cirbhhistoryindex no-access
An index used to access each 15 minute entry.
                           cirbhStatsHistoryDirection 1.3.6.1.4.1.9.9.483.1.2.12.1.2 cirbhtrafficdirection no-access
The direction of traffic on backhaul.
                           cirbhStatsHistoryTrafficType 1.3.6.1.4.1.9.9.483.1.2.12.1.3 cirbhtraffictype no-access
The type of traffic in backhaul history table.
                           cirbhStatsHistory000to009Seconds 1.3.6.1.4.1.9.9.483.1.2.12.1.4 perfintervalcount read-only
The total numbers of seconds during which the backhaul link was utilized from 0 to 9 percent.
                           cirbhStatsHistory010to019Seconds 1.3.6.1.4.1.9.9.483.1.2.12.1.5 perfintervalcount read-only
The total numbers of seconds during which the backhaul link was utilized from 10 to 19 percent.
                           cirbhStatsHistory020to029Seconds 1.3.6.1.4.1.9.9.483.1.2.12.1.6 perfintervalcount read-only
The total numbers of seconds during which the backhaul link was utilized from 20 to 29 percent.
                           cirbhStatsHistory030to039Seconds 1.3.6.1.4.1.9.9.483.1.2.12.1.7 perfintervalcount read-only
The total numbers of seconds during which the backhaul link was utilized from 30 to 39 percent.
                           cirbhStatsHistory040to049Seconds 1.3.6.1.4.1.9.9.483.1.2.12.1.8 perfintervalcount read-only
The total numbers of seconds during which the backhaul link was utilized from 40 to 49 percent.
                           cirbhStatsHistory050to059Seconds 1.3.6.1.4.1.9.9.483.1.2.12.1.9 perfintervalcount read-only
The total numbers of seconds during which the backhaul link was utilized from 50 to 59 percent.
                           cirbhStatsHistory060to069Seconds 1.3.6.1.4.1.9.9.483.1.2.12.1.10 perfintervalcount read-only
The total numbers of seconds during which the backhaul link was utilized from 60 to 69 percent.
                           cirbhStatsHistory070to079Seconds 1.3.6.1.4.1.9.9.483.1.2.12.1.11 perfintervalcount read-only
The total numbers of seconds during which the backhaul link was utilized from 70 to 79 percent.
                           cirbhStatsHistory080to089Seconds 1.3.6.1.4.1.9.9.483.1.2.12.1.12 perfintervalcount read-only
The total numbers of seconds during which the backhaul link was utilized from 80 to 89 percent.
                           cirbhStatsHistory090to100Seconds 1.3.6.1.4.1.9.9.483.1.2.12.1.13 perfintervalcount read-only
The total numbers of seconds during which the backhaul link was utilized from 90 to 100 percent.
                           cirbhStatsHistoryTimeStamp 1.3.6.1.4.1.9.9.483.1.2.12.1.14 timestamp read-only
End time when sample was collected.
                           cirbhStatsHistoryMaxUtilization 1.3.6.1.4.1.9.9.483.1.2.12.1.15 cirbhbackhaulutilization read-only
The maximum utilization encountered within interval.
                           cirbhStatsHistoryMaxTimeStamp 1.3.6.1.4.1.9.9.483.1.2.12.1.16 timestamp read-only
Time when cirbhStatsHistoryMaxUtilization was recorded.
                           cirbhStatsHistoryAverage 1.3.6.1.4.1.9.9.483.1.2.12.1.17 cirbhbackhaulutilization read-only
The average utilization over the specified time period.
             cirbhNotifEnables 1.3.6.1.4.1.9.9.483.1.3
                 cirbhGsmAlarmNotifEnabled 1.3.6.1.4.1.9.9.483.1.3.1 truthvalue read-write
This object specifies whether the agent should generate the ciscoIpRanBackHaulGsmAlarm defined in this MIB module. 'true' Indicates that ciscoIpRanBackHaulGsmAlarm notification is to be generated. 'false' Indicates that ciscoIpRanBackHaulGsmAlarm notification generation is disabled.
                 cirbhUmtsAlarmNotifEnabled 1.3.6.1.4.1.9.9.483.1.3.2 truthvalue read-write
This object specifies whether the agent should generate the ciscoIpRanBackHaulUmtsAlarm defined in this MIB module. 'true' Indicates that ciscoIpRanBackHaulUmtsAlarm notification is to be generated. 'false' Indicates that ciscoIpRanBackHaulUmtsAlarm notification generation is disabled.
                 cirbhUtilNotifEnabled 1.3.6.1.4.1.9.9.483.1.3.3 truthvalue read-write
This object specifies whether the agent should generate the ciscoIpRanBackHaulRcvdUtil or ciscoIpRanBackHaulSentUtil defined in this MIB module. 'true' Indicates that ciscoIpRanBackHaulRcvdUtil and ciscoIpRanBackHaulSentUtil notifications are to be generated. 'false' Indicates that ciscoIpRanBackHaulRcvdUtil and ciscoIpRanBackHaulSentUtil notifications generation is disabled.
         ciscoIpRanBackHaulMIBConform 1.3.6.1.4.1.9.9.483.2
             ciscoIpRanBackHaulMIBCompliances 1.3.6.1.4.1.9.9.483.2.1
                 ciscoIpRanBackHaulMIBCompliance 1.3.6.1.4.1.9.9.483.2.1.1
The compliance statement for entities which implement the CISCO-IP-RAN-BACKHAUL-MIB.my managment information base.
                 ciscoIpRanBackHaulMIBComplianceRev1 1.3.6.1.4.1.9.9.483.2.1.2
The compliance statement for entities which implement the CISCO-IP-RAN-BACKHAUL-MIB.my managment information base.
                 ciscoIpRanBackHaulMIBComplianceRev2 1.3.6.1.4.1.9.9.483.2.1.3
The compliance statement for entities which implement the CISCO-IP-RAN-BACKHAUL-MIB.my managment information base.
                 ciscoIpRanBackHaulMIBComplianceRev3 1.3.6.1.4.1.9.9.483.2.1.4
The compliance statement for entities which implement the CISCO-IP-RAN-BACKHAUL-MIB.my managment information base.
             ciscoIpRanBackHaulMIBGroups 1.3.6.1.4.1.9.9.483.2.2
                 ciscoIpRanBackHaulScalarsGroup 1.3.6.1.4.1.9.9.483.2.2.1
Cisco IP RAN Input Scalars Group.
                 ciscoIpRanBackHaulConfigGroup 1.3.6.1.4.1.9.9.483.2.2.2
Cisco IP RAN Configuration Group.
                 ciscoIpRanBackHaulStatsGroup 1.3.6.1.4.1.9.9.483.2.2.3
Cisco IP RAN Backhaul Statistics Group.
                 ciscoIpRanBackHaulAlarmGroup 1.3.6.1.4.1.9.9.483.2.2.4
Cisco IP RAN Alarm Group.
                 ciscoIpRanBackHaulErrorsGroup 1.3.6.1.4.1.9.9.483.2.2.5
Cisco protocol errors Group.
                 ciscoIpRanBackHaulHistoryGroup 1.3.6.1.4.1.9.9.483.2.2.6
Cisco IP RAN Utilization History Group.
                 ciscoIpRanBackHaulNotifGroup 1.3.6.1.4.1.9.9.483.2.2.7
Cisco IP RAN Notifications.
                 ciscoIpRanBackHaulShortHaulGroup 1.3.6.1.4.1.9.9.483.2.2.8
Cisco IP RAN Backhaul to Shorthaul Group.
                 ciscoIpRanBackHaulAlarmGroupSup1 1.3.6.1.4.1.9.9.483.2.2.9
Additional objects for Cisco IP RAN Alarm Group.
                 ciscoIpRanBackHaulScalarsGroupRev2 1.3.6.1.4.1.9.9.483.2.2.10
Cisco IP RAN Input Scalars Group.
                 ciscoIpRanBackHaulConfigGroupSup2 1.3.6.1.4.1.9.9.483.2.2.11
Cisco IP RAN Configuration Group Sup2.
                 ciscoIpRanBackHaulHistoryGroupRev2 1.3.6.1.4.1.9.9.483.2.2.12
Cisco IP RAN Utilization History Group.
                 ciscoIpRanBackHaulNotifGroupRev2 1.3.6.1.4.1.9.9.483.2.2.13
Cisco IP RAN Notifications.
                 ciscoIpRanBackHaulCongestionGroup 1.3.6.1.4.1.9.9.483.2.2.14
Cisco IP RAN congestion object group.
                 ciscoIpRanBackHaulGsmErrorsGroup 1.3.6.1.4.1.9.9.483.2.2.15
Cisco GSM-Abis protocol errors Group.
                 ciscoIpRanBackHaulUmtsErrorsGroup 1.3.6.1.4.1.9.9.483.2.2.16
Cisco UMTS-Iub protocol errors Group.
                 ciscoIpRanBackHaulConfigGroupSup3 1.3.6.1.4.1.9.9.483.2.2.17
Cisco IP RAN Configuration Group for Optimization.
                 ciscoIpRanBackHaulHistoryGroupRev3 1.3.6.1.4.1.9.9.483.2.2.18
Cisco IP RAN Utilization History Group.