CISCO-FLASH-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-FLASH-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoFlashMIB 1.3.6.1.4.1.9.9.10
This MIB provides for the management of Cisco Flash Devices.
       ciscoFlashMIBObjects 1.3.6.1.4.1.9.9.10.1
           ciscoFlashDevice 1.3.6.1.4.1.9.9.10.1.1
               ciscoFlashDevicesSupported 1.3.6.1.4.1.9.9.10.1.1.1 unsigned32 read-only
Number of Flash devices supported by the system. If the system does not support any Flash devices, this MIB will not be loaded on that system. The value of this object will therefore be atleast 1.
               ciscoFlashDeviceTable 1.3.6.1.4.1.9.9.10.1.1.2 no-access
Table of Flash device properties for each initialized Flash device. Each Flash device installed in a system is detected, sized, and initialized when the system image boots up. For removable Flash devices, the device properties will be dynamically deleted and recreated as the device is removed and inserted. Note that in this case, the newly inserted device may not be the same as the earlier removed one. The ciscoFlashDeviceInitTime object is available for a management station to determine the time at which a device was initialized, and thereby detect the change of a removable device. A removable device that has not been installed will also have an entry in this table. This is to let a management station know about a removable device that has been removed. Since a removed device obviously cannot be sized and initialized, the table entry for such a device will have ciscoFlashDeviceSize equal to zero, and the following objects will have an indeterminate value: ciscoFlashDeviceMinPartitionSize, ciscoFlashDeviceMaxPartitions, ciscoFlashDevicePartitions, and ciscoFlashDeviceChipCount. ciscoFlashDeviceRemovable will be true to indicate it is removable.
                   ciscoFlashDeviceEntry 1.3.6.1.4.1.9.9.10.1.1.2.1 no-access
An entry in the table of flash device properties for each initialized flash device. Each entry can be randomly accessed by using ciscoFlashDeviceIndex as an index into the table. Note that removable devices will have an entry in the table even when they have been removed. However, a non-removable device that has not been installed will not have an entry in the table.
                       ciscoFlashDeviceIndex 1.3.6.1.4.1.9.9.10.1.1.2.1.1 unsigned32 no-access
Flash device sequence number to index within the table of initialized flash devices. The lowest value should be 1. The highest should be less than or equal to the value of the ciscoFlashDevicesSupported object.
                       ciscoFlashDeviceSize 1.3.6.1.4.1.9.9.10.1.1.2.1.2 unsigned32 read-only
Total size of the Flash device. For a removable device, the size will be zero if the device has been removed. If the total size of the flash device is greater than the maximum value reportable by this object then this object should report its maximum value(4,294,967,295) and ciscoFlashDeviceSizeExtended must be used to report the flash device's size.
                       ciscoFlashDeviceMinPartitionSize 1.3.6.1.4.1.9.9.10.1.1.2.1.3 unsigned32 read-only
This object will give the minimum partition size supported for this device. For systems that execute code directly out of Flash, the minimum partition size needs to be the bank size. (Bank size is equal to the size of a chip multiplied by the width of the device. In most cases, the device width is 4 bytes, and so the bank size would be four times the size of a chip). This has to be so because all programming commands affect the operation of an entire chip (in our case, an entire bank because all operations are done on the entire width of the device) even though the actual command may be localized to a small portion of each chip. So when executing code out of Flash, one needs to be able to write and erase some portion of Flash without affecting the code execution. For systems that execute code out of DRAM or ROM, it is possible to partition Flash with a finer granularity (for eg., at erase sector boundaries) if the system code supports such granularity. This object will let a management entity know the minimum partition size as defined by the system. If the system does not support partitioning, the value will be equal to the device size in ciscoFlashDeviceSize. The maximum number of partitions that could be configured will be equal to the minimum of ciscoFlashDeviceMaxPartitions and (ciscoFlashDeviceSize / ciscoFlashDeviceMinPartitionSize). If the total size of the flash device is greater than the maximum value reportable by this object then this object should report its maximum value(4,294,967,295) and ciscoFlashDeviceMinPartitionSizeExtended must be used to report the flash device's minimum partition size.
                       ciscoFlashDeviceMaxPartitions 1.3.6.1.4.1.9.9.10.1.1.2.1.4 unsigned32 read-only
Max number of partitions supported by the system for this Flash device. Default will be 1, which actually means that partitioning is not supported. Note that this value will be defined by system limitations, not by the flash device itself (for eg., the system may impose a limit of 2 partitions even though the device may be large enough to be partitioned into 4 based on the smallest partition unit supported). On systems that execute code out of Flash, partitioning is a way of creating multiple file systems in the Flash device so that writing into or erasing of one file system can be done while executing code residing in another file system. For systems executing code out of DRAM, partitioning gives a way of sub-dividing a large Flash device for easier management of files.
                       ciscoFlashDevicePartitions 1.3.6.1.4.1.9.9.10.1.1.2.1.5 unsigned32 read-only
Flash device partitions actually present. Number of partitions cannot exceed the minimum of ciscoFlashDeviceMaxPartitions and (ciscoFlashDeviceSize / ciscoFlashDeviceMinPartitionSize). Will be equal to at least 1, the case where the partition spans the entire device (actually no partitioning). A partition will contain one or more minimum partition units (where a minimum partition unit is defined by ciscoFlashDeviceMinPartitionSize).
                       ciscoFlashDeviceChipCount 1.3.6.1.4.1.9.9.10.1.1.2.1.6 integer32 read-only
Total number of chips within the Flash device. The purpose of this object is to provide information upfront to a management station on how much chip info to expect and possibly help double check the chip index against an upper limit when randomly retrieving chip info for a partition.
                       ciscoFlashDeviceName 1.3.6.1.4.1.9.9.10.1.1.2.1.7 displaystring read-only
Flash device name. This name is used to refer to the device within the system. Flash operations get directed to a device based on this name. The system has a concept of a default device. This would be the primary or most used device in case of multiple devices. The system directs an operation to the default device whenever a device name is not specified. The device name is therefore mandatory except when the operation is being done on the default device, or, the system supports only a single Flash device. The device name will always be available for a removable device, even when the device has been removed.
                       ciscoFlashDeviceDescr 1.3.6.1.4.1.9.9.10.1.1.2.1.8 displaystring read-only
Description of a Flash device. The description is meant to explain what the Flash device and its purpose is. Current values are: System flash - for the primary Flash used to store full system images. Boot flash - for the secondary Flash used to store bootstrap images. The ciscoFlashDeviceDescr, ciscoFlashDeviceController (if applicable), and ciscoFlashPhyEntIndex objects are expected to collectively give all information about a Flash device. The device description will always be available for a removable device, even when the device has been removed.
                       ciscoFlashDeviceController 1.3.6.1.4.1.9.9.10.1.1.2.1.9 displaystring read-only
Flash device controller. The h/w card that actually controls Flash read/write/erase. Relevant for the AGS+ systems where Flash may be controlled by the MC+, STR or the ENVM cards, cards that may not actually contain the Flash chips. For systems that have removable PCMCIA flash cards that are controlled by a PCMCIA controller chip, this object may contain a description of that controller chip. Where irrelevant (Flash is a direct memory mapped device accessed directly by the main processor), this object will have an empty (NULL) string.
                       ciscoFlashDeviceCard 1.3.6.1.4.1.9.9.10.1.1.2.1.10 instancepointer read-only
This object will point to an instance of a card entry in the cardTable. The card entry will give details about the card on which the Flash device is actually located. For most systems, this is usually the main processor board. On the AGS+ systems, Flash is located on a separate multibus card such as the MC. This object will therefore be used to essentially index into cardTable to retrieve details about the card such as cardDescr, cardSlotNumber, etc.
                       ciscoFlashDeviceProgrammingJumper 1.3.6.1.4.1.9.9.10.1.1.2.1.11 integer read-only
This object gives the state of a jumper (if present and can be determined) that controls the programming voltage called Vpp to the Flash device. Vpp is required for programming (erasing and writing) Flash. For certain older technology chips it is also required for identifying the chips (which in turn is required to identify which programming algorithms to use; different chips require different algorithms and commands). The purpose of the jumper, on systems where it is available, is to write protect a Flash device. On most of the newer remote access routers, this jumper is unavailable since users are not expected to visit remote sites just to install and remove the jumpers when upgrading software in the Flash device. The unknown(3) value will be returned for such systems and can be interpreted to mean that a programming jumper is not present or not required on those systems. On systems where the programming jumper state can be read back via a hardware register, the installed(1) or notInstalled(2) value will be returned. This object is expected to be used in conjunction with the ciscoFlashPartitionStatus object whenever that object has the readOnly(1) value. In such a case, this object will indicate whether the programming jumper is a possible reason for the readOnly state. Enumeration: 'unknown': 3, 'notInstalled': 2, 'installed': 1.
                       ciscoFlashDeviceInitTime 1.3.6.1.4.1.9.9.10.1.1.2.1.12 timestamp read-only
System time at which device was initialized. For fixed devices, this will be the system time at boot up. For removable devices, it will be the time at which the device was inserted, which may be boot up time, or a later time (if device was inserted later). If a device (fixed or removable) was repartitioned, it will be the time of repartitioning. The purpose of this object is to help a management station determine if a removable device has been changed. The application should retrieve this object prior to any operation and compare with the previously retrieved value. Note that this time will not be real time but a running time maintained by the system. This running time starts from zero when the system boots up. For a removable device that has been removed, this value will be zero.
                       ciscoFlashDeviceRemovable 1.3.6.1.4.1.9.9.10.1.1.2.1.13 truthvalue read-only
Whether Flash device is removable. Generally, only PCMCIA Flash cards will be treated as removable. Socketed Flash chips and Flash SIMM modules will not be treated as removable. Simply put, only those Flash devices that can be inserted or removed without opening the hardware casing will be considered removable. Further, removable Flash devices are expected to have the necessary hardware support - 1. on-line removal and insertion 2. interrupt generation on removal or insertion.
                       ciscoFlashPhyEntIndex 1.3.6.1.4.1.9.9.10.1.1.2.1.14 physicalindex read-only
This object indicates the physical entity index of a physical entity in entPhysicalTable which the flash device actually located.
                       ciscoFlashDeviceNameExtended 1.3.6.1.4.1.9.9.10.1.1.2.1.15 displaystring read-only
Extended Flash device name whose size can be upto 255 characters. This name is used to refer to the device within the system. Flash operations get directed to a device based on this name. The system has a concept of a default device. This would be the primary or most used device in case of multiple devices. The system directs an operation to the default device whenever a device name is not specified. The device name is therefore mandatory except when the operation is being done on the default device, or, the system supports only a single Flash device. The device name will always be available for a removable device, even when the device has been removed.
                       ciscoFlashDeviceSizeExtended 1.3.6.1.4.1.9.9.10.1.1.2.1.16 counterbasedgauge64 read-only
Total size of the Flash device. For a removable device, the size will be zero if the device has been removed. This object is a 64-bit version of ciscoFlashDeviceSize.
                       ciscoFlashDeviceMinPartitionSizeExtended 1.3.6.1.4.1.9.9.10.1.1.2.1.17 counterbasedgauge64 read-only
This object provides the minimum partition size supported for this device. This object is a 64-bit version of ciscoFlashDeviceMinPatitionSize.
               ciscoFlashChips 1.3.6.1.4.1.9.9.10.1.1.3
                   ciscoFlashChipTable 1.3.6.1.4.1.9.9.10.1.1.3.1 no-access
Table of Flash device chip properties for each initialized Flash device. This table is meant primarily for aiding error diagnosis.
                       ciscoFlashChipEntry 1.3.6.1.4.1.9.9.10.1.1.3.1.1 no-access
An entry in the table of chip info for each flash device initialized in the system. An entry is indexed by two objects - the device index and the chip index within that device.
                           ciscoFlashChipIndex 1.3.6.1.4.1.9.9.10.1.1.3.1.1.1 integer32 no-access
Chip sequence number within selected flash device. Used to index within chip info table. Value starts from 1 and should not be greater than ciscoFlashDeviceChipCount for that device. When retrieving chip information for chips within a partition, the sequence number should lie between ciscoFlashPartitionStartChip & ciscoFlashPartitionEndChip (both inclusive).
                           ciscoFlashChipCode 1.3.6.1.4.1.9.9.10.1.1.3.1.1.2 displaystring read-only
Manufacturer and device code for a chip. Lower byte will contain the device code. Upper byte will contain the manufacturer code. If a chip code is unknown because it could not be queried out of the chip, the value of this object will be 00:00. Since programming algorithms differ from chip type to chip type, this chip code should be used to determine which algorithms to use (and thereby whether the chip is supported in the first place).
                           ciscoFlashChipDescr 1.3.6.1.4.1.9.9.10.1.1.3.1.1.3 displaystring read-only
Flash chip name corresponding to the chip code. The name will contain the manufacturer and the chip type. It will be of the form : Intel 27F008SA. In the case where a chip code is unknown, this object will be an empty (NULL) string. In the case where the chip code is known but the chip is not supported by the system, this object will be an empty (NULL) string. A management station is therefore expected to use the chip code and the chip description in conjunction to provide additional information whenever the ciscoFlashPartitionStatus object has the readOnly(1) value.
                           ciscoFlashChipWriteRetries 1.3.6.1.4.1.9.9.10.1.1.3.1.1.4 counter32 read-only
This object will provide a cumulative count (since last system boot up or initialization) of the number of write retries that were done in the chip. If no writes have been done to Flash, the count will be zero. Typically, a maximum of 25 retries are done on a single location before flagging a write error. A management station is expected to get this object for each chip in a partition after a write failure in that partition. To keep a track of retries for a given write operation, the management station would have to retrieve the values for the concerned chips before and after any write operation.
                           ciscoFlashChipEraseRetries 1.3.6.1.4.1.9.9.10.1.1.3.1.1.5 counter32 read-only
This object will provide a cumulative count (since last system boot up or initialization) of the number of erase retries that were done in the chip. Typically, a maximum of 2000 retries are done in a single erase zone (which may be a full chip or a portion, depending on the chip technology) before flagging an erase error. A management station is expected to get this object for each chip in a partition after an erase failure in that partition. To keep a track of retries for a given erase operation, the management station would have to retrieve the values for the concerned chips before and after any erase operation. Note that erase may be done through an independent command, or through a copy-to-flash command.
                           ciscoFlashChipMaxWriteRetries 1.3.6.1.4.1.9.9.10.1.1.3.1.1.6 unsigned32 read-only
The maximum number of write retries done at any single location before declaring a write failure.
                           ciscoFlashChipMaxEraseRetries 1.3.6.1.4.1.9.9.10.1.1.3.1.1.7 unsigned32 read-only
The maximum number of erase retries done within an erase sector before declaring an erase failure.
               ciscoFlashPartitions 1.3.6.1.4.1.9.9.10.1.1.4
                   ciscoFlashPartitionTable 1.3.6.1.4.1.9.9.10.1.1.4.1 no-access
Table of flash device partition properties for each initialized flash partition. Whenever there is no explicit partitioning done, a single partition spanning the entire device will be assumed to exist. There will therefore always be atleast one partition on a device.
                       ciscoFlashPartitionEntry 1.3.6.1.4.1.9.9.10.1.1.4.1.1 no-access
An entry in the table of flash partition properties for each initialized flash partition. Each entry will be indexed by a device number and a partition number within the device.
                           ciscoFlashPartitionIndex 1.3.6.1.4.1.9.9.10.1.1.4.1.1.1 unsigned32 no-access
Flash partition sequence number used to index within table of initialized flash partitions.
                           ciscoFlashPartitionStartChip 1.3.6.1.4.1.9.9.10.1.1.4.1.1.2 integer32 read-only
Chip sequence number of first chip in partition. Used as an index into the chip table.
                           ciscoFlashPartitionEndChip 1.3.6.1.4.1.9.9.10.1.1.4.1.1.3 integer32 read-only
Chip sequence number of last chip in partition. Used as an index into the chip table.
                           ciscoFlashPartitionSize 1.3.6.1.4.1.9.9.10.1.1.4.1.1.4 unsigned32 read-only
Flash partition size. It should be an integral multiple of ciscoFlashDeviceMinPartitionSize. If there is a single partition, this size will be equal to ciscoFlashDeviceSize. If the size of the flash partition is greater than the maximum value reportable by this object then this object should report its maximum value(4,294,967,295) and ciscoFlashPartitionSizeExtended must be used to report the flash partition's size.
                           ciscoFlashPartitionFreeSpace 1.3.6.1.4.1.9.9.10.1.1.4.1.1.5 gauge32 read-only
Free space within a Flash partition. Note that the actual size of a file in Flash includes a small overhead that represents the file system's file header. Certain file systems may also have a partition or device header overhead to be considered when computing the free space. Free space will be computed as total partition size less size of all existing files (valid/invalid/deleted files and including file header of each file), less size of any partition header, less size of header of next file to be copied in. In short, this object will give the size of the largest file that can be copied in. The management entity will not be expected to know or use any overheads such as file and partition header lengths, since such overheads may vary from file system to file system. Deleted files in Flash do not free up space. A partition may have to be erased in order to reclaim the space occupied by files. If the free space within a flash partition is greater than the maximum value reportable by this object then this object should report its maximum value(4,294,967,295) and ciscoFlashPartitionFreeSpaceExtended must be used to report the flash partition's free space.
                           ciscoFlashPartitionFileCount 1.3.6.1.4.1.9.9.10.1.1.4.1.1.6 gauge32 read-only
Count of all files in a flash partition. Both good and bad (deleted or invalid checksum) files will be included in this count.
                           ciscoFlashPartitionChecksumAlgorithm 1.3.6.1.4.1.9.9.10.1.1.4.1.1.7 integer read-only
Checksum algorithm identifier for checksum method used by the file system. Normally, this would be fixed for a particular file system. When a file system writes a file to Flash, it checksums the data written. The checksum then serves as a way to validate the data read back whenever the file is opened for reading. Since there is no way, when using TFTP, to guarantee that a network download has been error free (since UDP checksums may not have been enabled), this object together with the ciscoFlashFileChecksum object provides a method for any management station to regenerate the checksum of the original file on the server and compare checksums to ensure that the file download to Flash was error free. simpleChecksum represents a simple 1s complement addition of short word values. Other algorithm values will be added as necessary. Enumeration: 'simpleChecksum': 1, 'undefined': 2, 'simpleCRC': 3.
                           ciscoFlashPartitionStatus 1.3.6.1.4.1.9.9.10.1.1.4.1.1.8 integer read-only
Flash partition status can be : * readOnly if device is not programmable either because chips could not be recognized or an erroneous mismatch of chips was detected. Chip recognition may fail either because the chips are not supported by the system, or because the Vpp voltage required to identify chips has been disabled via the programming jumper. The ciscoFlashDeviceProgrammingJumper, ciscoFlashChipCode, and ciscoFlashChipDescr objects can be examined to get more details on the cause of this status * runFromFlash (RFF) if current image is running from this partition. The ciscoFlashPartitionUpgradeMethod object will then indicate whether the Flash Load Helper can be used to write a file to this partition or not. * readWrite if partition is programmable. Enumeration: 'readWrite': 3, 'readOnly': 1, 'runFromFlash': 2.
                           ciscoFlashPartitionUpgradeMethod 1.3.6.1.4.1.9.9.10.1.1.4.1.1.9 integer read-only
Flash partition upgrade method, ie., method by which new files can be downloaded into the partition. FLH stands for Flash Load Helper, a feature provided on run-from-Flash systems for upgrading Flash. This feature uses the bootstrap code in ROMs to help in automatic download. This object should be retrieved if the partition status is runFromFlash(2). If the partition status is readOnly(1), the upgrade method would depend on the reason for the readOnly status. For eg., it may simply be a matter of installing the programming jumper, or it may require execution of a later version of software that supports the Flash chips. unknown - the current system image does not know how Flash can be programmed. A possible method would be to reload the ROM image and perform the upgrade manually. rxbootFLH - the Flash Load Helper is available to download files to Flash. A copy-to-flash command can be used and this system image will automatically reload the Rxboot image in ROM and direct it to carry out the download request. direct - will be done directly by this image. Enumeration: 'unknown': 1, 'rxbootFLH': 2, 'direct': 3.
                           ciscoFlashPartitionName 1.3.6.1.4.1.9.9.10.1.1.4.1.1.10 displaystring read-only
Flash partition name used to refer to a partition by the system. This can be any alpha-numeric character string of the form AAAAAAAAnn, where A represents an optional alpha character and n a numeric character. Any numeric characters must always form the trailing part of the string. The system will strip off the alpha characters and use the numeric portion to map to a partition index. Flash operations get directed to a device partition based on this name. The system has a concept of a default partition. This would be the first partition in the device. The system directs an operation to the default partition whenever a partition name is not specified. The partition name is therefore mandatory except when the operation is being done on the default partition, or the device has just one partition (is not partitioned).
                           ciscoFlashPartitionNeedErasure 1.3.6.1.4.1.9.9.10.1.1.4.1.1.11 truthvalue read-only
This object indicates whether a partition requires erasure before any write operations can be done in it. A management station should therefore retrieve this object prior to attempting any write operation. A partition requires erasure after it becomes full free space left is less than or equal to the (filesystem file header size). A partition also requires erasure if the system does not find the existence of any file system when it boots up. The partition may be erased explicitly through the erase(5) command, or by using the copyToFlashWithErase(1) command. If a copyToFlashWithoutErase(2) command is issued when this object has the TRUE value, the command will fail.
                           ciscoFlashPartitionFileNameLength 1.3.6.1.4.1.9.9.10.1.1.4.1.1.12 integer32 read-only
Maximum file name length supported by the file system. Max file name length will depend on the file system implemented. Today, all file systems support a max length of at least 48 bytes. A management entity must use this object when prompting a user for, or deriving the Flash file name length.
                           ciscoFlashPartitionSizeExtended 1.3.6.1.4.1.9.9.10.1.1.4.1.1.13 counterbasedgauge64 read-only
Flash partition size. It should be an integral multiple of ciscoFlashDeviceMinPartitionSize. If there is a single partition, this size will be equal to ciscoFlashDeviceSize. This object is a 64-bit version of ciscoFlashPartitionSize
                           ciscoFlashPartitionFreeSpaceExtended 1.3.6.1.4.1.9.9.10.1.1.4.1.1.14 counterbasedgauge64 read-only
Free space within a Flash partition. Note that the actual size of a file in Flash includes a small overhead that represents the file system's file header. Certain file systems may also have a partition or device header overhead to be considered when computing the free space. Free space will be computed as total partition size less size of all existing files (valid/invalid/deleted files and including file header of each file), less size of any partition header, less size of header of next file to be copied in. In short, this object will give the size of the largest file that can be copied in. The management entity will not be expected to know or use any overheads such as file and partition header lengths, since such overheads may vary from file system to file system. Deleted files in Flash do not free up space. A partition may have to be erased in order to reclaim the space occupied by files. This object is a 64-bit version of ciscoFlashPartitionFreeSpace
                           ciscoFlashPartitionLowSpaceNotifThreshold 1.3.6.1.4.1.9.9.10.1.1.4.1.1.15 percent read-write
This object specifies the minimum threshold value in percentage of free space for each partition. If the free space available goes below this threshold value and if ciscoFlashPartionLowSpaceNotifEnable is set to true, ciscoFlashPartitionLowSpaceNotif will be generated. When the available free space comes back to the threshold value ciscoFlashPartionLowSpaceRecoveryNotif will be generated.
                   ciscoFlashFiles 1.3.6.1.4.1.9.9.10.1.1.4.2
                       ciscoFlashFileTable 1.3.6.1.4.1.9.9.10.1.1.4.2.1 no-access
Table of information for files in a Flash partition.
                           ciscoFlashFileEntry 1.3.6.1.4.1.9.9.10.1.1.4.2.1.1 no-access
An entry in the table of Flash file properties for each initialized Flash partition. Each entry represents a file and gives details about the file. An entry is indexed using the device number, partition number within the device, and file number within the partition.
                               ciscoFlashFileIndex 1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.1 unsigned32 no-access
Flash file sequence number used to index within a Flash partition directory table.
                               ciscoFlashFileSize 1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.2 unsigned32 read-only
Size of the file in bytes. Note that this size does not include the size of the filesystem file header. File size will always be non-zero.
                               ciscoFlashFileChecksum 1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.3 checksumstring read-only
File checksum stored in the file header. This checksum is computed and stored when the file is written into Flash. It serves to validate the data written into Flash. Whereas the system will generate and store the checksum internally in hexadecimal form, this object will provide the checksum in a string form. The checksum will be available for all valid and invalid-checksum files.
                               ciscoFlashFileStatus 1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.4 integer read-only
Status of a file. A file could be explicitly deleted if the file system supports such a user command facility. Alternately, an existing good file would be automatically deleted if another good file with the same name were copied in. Note that deleted files continue to occupy prime Flash real estate. A file is marked as having an invalid checksum if any checksum mismatch was detected while writing or reading the file. Incomplete files (files truncated either because of lack of free space, or a network download failure) are also written with a bad checksum and marked as invalid. Enumeration: 'deleted': 1, 'valid': 3, 'invalidChecksum': 2.
                               ciscoFlashFileName 1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.5 displaystring read-only
Flash file name as specified by the user copying in the file. The name should not include the colon (:) character as it is a special separator character used to delineate the device name, partition name, and the file name.
                               ciscoFlashFileType 1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.6 flashfiletype read-only
Type of the file.
                               ciscoFlashFileDate 1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.7 dateandtime read-only
The time at which this file was created.
                       ciscoFlashFileByTypeTable 1.3.6.1.4.1.9.9.10.1.1.4.2.2 no-access
Table of information for files on the manageable flash devices sorted by File Types.
                           ciscoFlashFileByTypeEntry 1.3.6.1.4.1.9.9.10.1.1.4.2.2.1 no-access
An entry in the table of Flash file properties for each initialized Flash partition. Each entry represents a file sorted by file type. This table contains exactly the same set of rows as are contained in the ciscoFlashFileTable but in a different order, i.e., ordered by the type of file, given by ciscoFlashFileType; the device number, given by ciscoFlashDeviceIndex; the partition number within the device, given by ciscoFlashPartitionIndex; the file number within the partition, given by ciscoFlashFileIndex.
                               ciscoFlashFileByTypeSize 1.3.6.1.4.1.9.9.10.1.1.4.2.2.1.1 unsigned32 read-only
This object represents exactly the same info as ciscoFlashFileSize object in ciscoFlashFileTable.
                               ciscoFlashFileByTypeChecksum 1.3.6.1.4.1.9.9.10.1.1.4.2.2.1.2 checksumstring read-only
This object represents exactly the same info as ciscoFlashFileChecksum object in ciscoFlashFileTable.
                               ciscoFlashFileByTypeStatus 1.3.6.1.4.1.9.9.10.1.1.4.2.2.1.3 integer read-only
This object represents exactly the same info as ciscoFlashFileStatus object in ciscoFlashFileTable. Enumeration: 'deleted': 1, 'valid': 3, 'invalidChecksum': 2.
                               ciscoFlashFileByTypeName 1.3.6.1.4.1.9.9.10.1.1.4.2.2.1.4 displaystring read-only
This object represents exactly the same info as ciscoFlashFileName object in ciscoFlashFileTable.
                               ciscoFlashFileByTypeDate 1.3.6.1.4.1.9.9.10.1.1.4.2.2.1.5 dateandtime read-only
This object represents exactly the same info as ciscoFlashFileDate object in ciscoFlashFileTable.
           ciscoFlashOps 1.3.6.1.4.1.9.9.10.1.2
               ciscoFlashCopyTable 1.3.6.1.4.1.9.9.10.1.2.1 no-access
A table of Flash copy operation entries. Each entry represents a Flash copy operation (to or from Flash) that has been initiated.
                   ciscoFlashCopyEntry 1.3.6.1.4.1.9.9.10.1.2.1.1 no-access
A Flash copy operation entry. Each entry consists of a command, a source, and optional parameters such as protocol to be used, a destination, a server address, etc. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. The station should then create the associated instance of the row status object. It must also, either in the same or in successive PDUs, create the associated instance of the command and parameter objects. It should also modify the default values for any of the parameter objects if the defaults are not appropriate. Once the appropriate instances of all the command objects have been created, either by an explicit SNMP set request or by default, the row status should be set to active to initiate the operation. Note that this entire procedure may be initiated via a single set request which specifies a row status of createAndGo as well as specifies valid values for the non-defaulted parameter objects. Once an operation has been activated, it cannot be stopped. Once the operation completes, the management station should retrieve the value of the status object (and time if desired), and delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing.
                       ciscoFlashCopySerialNumber 1.3.6.1.4.1.9.9.10.1.2.1.1.1 integer32 no-access
Object which specifies a unique entry in the table. A management station wishing to initiate a copy operation should use a pseudo-random value for this object when creating or modifying an instance of a ciscoFlashCopyEntry.
                       ciscoFlashCopyCommand 1.3.6.1.4.1.9.9.10.1.2.1.1.2 integer read-only
The copy command to be executed. Mandatory. Note that it is possible for a system to support multiple file systems (different file systems on different Flash devices, or different file systems on different partitions within a device). Each such file system may support only a subset of these commands. If a command is unsupported, the invalidOperation(3) error will be reported in the operation status. Command Remarks copyToFlashWithErase Copy a file to flash; erase flash before copy. Use the TFTP or rcp protocol. copyToFlashWithoutErase Copy a file to flash; do not erase. Note that this command will fail if the PartitionNeedErasure object specifies that the partition being copied to needs erasure. Use the TFTP or rcp protocol. copyFromFlash Copy a file from flash using the TFTP, rcp or lex protocol. Note that the lex protocol can only be used to copy to a lex device. copyFromFlhLog Copy contents of FLH log to server using TFTP protocol. Command table Parameters copyToFlashWithErase CopyProtocol CopyServerAddress CopySourceName CopyDestinationName (opt) CopyRemoteUserName (opt) CopyNotifyOnCompletion (opt) copyToFlashWithoutErase CopyProtocol CopyServerAddress CopySourceName CopyDestinationName (opt) CopyRemoteUserName (opt) CopyNotifyOnCompletion (opt) copyFromFlash CopyProtocol CopyServerAddress CopySourceName CopyDestinationName (opt) CopyRemoteUserName (opt) CopyNotifyOnCompletion (opt) copyFromFlhLog CopyProtocol CopyServerAddress CopyDestinationName CopyNotifyOnCompletion (opt) Enumeration: 'copyToFlashWithoutErase': 2, 'copyToFlashWithErase': 1, 'copyFromFlhLog': 4, 'copyFromFlash': 3.
                       ciscoFlashCopyProtocol 1.3.6.1.4.1.9.9.10.1.2.1.1.3 integer read-only
The protocol to be used for any copy. Optional. Will default to tftp if not specified. Since feature support depends on a software release, version number within the release, platform, and maybe the image type (subset type), a management station would be expected to somehow determine the protocol support for a command. Enumeration: 'ftp': 4, 'rcp': 2, 'sftp': 6, 'lex': 3, 'tftp': 1, 'scp': 5.
                       ciscoFlashCopyServerAddress 1.3.6.1.4.1.9.9.10.1.2.1.1.4 ipaddress read-only
The server address to be used for any copy. Optional. Will default to 'FFFFFFFF'H (or 255.255.255.255). Since this object can just hold only IPv4 Transport type, it is deprecated and replaced by ciscoFlashCopyServerAddrRev1.
                       ciscoFlashCopySourceName 1.3.6.1.4.1.9.9.10.1.2.1.1.5 displaystring read-only
Source file name, either in Flash or on a server, depending on the type of copy command. Mandatory. For a copy from Flash: File name must be of the form [device>:][:] where is a value obtained from FlashDeviceName, is obtained from FlashPartitionName and is the name of a file in Flash. A management station could derive its own partition name as per the description for the ciscoFlashPartitionName object. If is not specified, the default Flash device will be assumed. If is not specified, the default partition will be assumed. If a device is not partitioned into 2 or more partitions, this value may be left out. For a copy to Flash, the file name will be as per the file naming conventions and path to the file on the server.
                       ciscoFlashCopyDestinationName 1.3.6.1.4.1.9.9.10.1.2.1.1.6 displaystring read-only
Destination file name. For a copy to Flash: File name must be of the form {device>:][:] where is a value obtained from FlashDeviceName, is obtained from FlashPartitionName and is any character string that does not have embedded colon characters. A management station could derive its own partition name as per the description for the ciscoFlashPartitionName object. If is not specified, the default Flash device will be assumed. If is not specified, the default partition will be assumed. If a device is not partitioned into 2 or more partitions, this value may be left out. If is not specified, it will default to specified in ciscoFlashCopySourceName. For a copy from Flash via tftp or rcp, the file name will be as per the file naming conventions and destination sub-directory on the server. If not specified, from the source file name will be used. For a copy from Flash via lex, this string will consist of numeric characters specifying the interface on the lex box that will receive the source flash image.
                       ciscoFlashCopyRemoteUserName 1.3.6.1.4.1.9.9.10.1.2.1.1.7 displaystring read-only
Remote user name for copy via rcp protocol. Optional. This object will be ignored for protocols other than rcp. If specified, it will override the remote user-name configured through the rcmd remote-username configuration command. The remote user-name is sent as the server user-name in an rcp command request sent by the system to a remote rcp server.
                       ciscoFlashCopyStatus 1.3.6.1.4.1.9.9.10.1.2.1.1.8 integer read-only
The status of the specified copy operation. copyOperationPending : operation request is received and pending for validation and process copyInProgress : specified operation is active copyOperationSuccess : specified operation is supported and completed successfully copyInvalidOperation : command invalid or command-protocol-device combination unsupported copyInvalidProtocol : invalid protocol specified copyInvalidSourceName : invalid source file name specified For the copy from flash to lex operation, this error code will be returned when the source file is not a valid lex image. copyInvalidDestName : invalid target name (file or partition or device name) specified For the copy from flash to lex operation, this error code will be returned when no lex devices are connected to the router or when an invalid lex interface number has been specified in the destination string. copyInvalidServerAddress : invalid server address specified copyDeviceBusy : specified device is in use and locked by another process copyDeviceOpenError : invalid device name copyDeviceError : device read, write or erase error copyDeviceNotProgrammable : device is read-only but a write or erase operation was specified copyDeviceFull : device is filled to capacity copyFileOpenError : invalid file name; file not found in partition copyFileTransferError : file transfer was unsuccessfull; network failure copyFileChecksumError : file checksum in Flash failed copyNoMemory : system running low on memory copyUnknownFailure : failure unknown copyProhibited: stop user from overwriting current boot image file. Enumeration: 'copyFileChecksumError': 15, 'copyInvalidSignature': 18, 'copyProhibited': 19, 'copyUnknownFailure': 17, 'copyOperationSuccess': 2, 'copyNoMemory': 16, 'copyFileOpenError': 13, 'copyInvalidProtocol': 4, 'copyDeviceFull': 12, 'copyInProgress': 1, 'copyInvalidDestName': 6, 'copyInvalidSourceName': 5, 'copyDeviceNotProgrammable': 11, 'copyInvalidServerAddress': 7, 'copyDeviceError': 10, 'copyFileTransferError': 14, 'copyOperationPending': 0, 'copyDeviceBusy': 8, 'copyDeviceOpenError': 9, 'copyInvalidOperation': 3.
                       ciscoFlashCopyNotifyOnCompletion 1.3.6.1.4.1.9.9.10.1.2.1.1.9 truthvalue read-only
Specifies whether or not a notification should be generated on the completion of the copy operation. If specified, ciscoFlashCopyCompletionTrap will be generated. It is the responsibility of the management entity to ensure that the SNMP administrative model is configured in such a way as to allow the notification to be delivered.
                       ciscoFlashCopyTime 1.3.6.1.4.1.9.9.10.1.2.1.1.10 timeticks read-only
Time taken for the copy operation. This object will be like a stopwatch, starting when the operation starts, stopping when the operation completes. If a management entity keeps a database of completion times for various operations, it can then use the stopwatch capability to display percentage completion time.
                       ciscoFlashCopyEntryStatus 1.3.6.1.4.1.9.9.10.1.2.1.1.11 rowstatus read-only
The status of this table entry.
                       ciscoFlashCopyVerify 1.3.6.1.4.1.9.9.10.1.2.1.1.12 truthvalue read-only
Specifies whether the file that is copied need to be verified for integrity / authenticity, after copy succeeds. If it is set to true, and if the file that is copied doesn't have integrity /authenticity attachement, or the integrity / authenticity check fails, then the command will be aborted, and the file that is copied will be deleted from the destination file system.
                       ciscoFlashCopyServerAddrType 1.3.6.1.4.1.9.9.10.1.2.1.1.13 inetaddresstype read-only
This object indicates the transport type of the address contained in ciscoFlashCopyServerAddrRev1. Optional. Will default to '1' (IPv4 address type).
                       ciscoFlashCopyServerAddrRev1 1.3.6.1.4.1.9.9.10.1.2.1.1.14 inetaddress read-only
The server address to be used for any copy. Optional. Will default to 'FFFFFFFF'H (or 255.255.255.255). The Format of this address depends on the value of the ciscoFlashCopyServerAddrType. This object deprecates the old ciscoFlashCopyServerAddress object.
                       ciscoFlashCopyRemotePassword 1.3.6.1.4.1.9.9.10.1.2.1.1.15 displaystring read-only
Password used by ftp, sftp or scp for copying a file to/from an ftp/sftp/scp server. This object must be created when the ciscoFlashCopyProtocol is ftp, sftp or scp. Reading it returns a zero-length string for security reasons.
               ciscoFlashPartitioningTable 1.3.6.1.4.1.9.9.10.1.2.2 no-access
A table of Flash partitioning operation entries. Each entry represents a Flash partitioning operation that has been initiated.
                   ciscoFlashPartitioningEntry 1.3.6.1.4.1.9.9.10.1.2.2.1 no-access
A Flash partitioning operation entry. Each entry consists of the command, the target device, the partition count, and optionally the partition sizes. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. The station should then create the associated instance of the row status object. It must also, either in the same or in successive PDUs, create the associated instance of the command and parameter objects. It should also modify the default values for any of the parameter objects if the defaults are not appropriate. Once the appropriate instances of all the command objects have been created, either by an explicit SNMP set request or by default, the row status should be set to active to initiate the operation. Note that this entire procedure may be initiated via a single set request which specifies a row status of createAndGo as well as specifies valid values for the non-defaulted parameter objects. Once an operation has been activated, it cannot be stopped. Once the operation completes, the management station should retrieve the value of the status object (and time if desired), and delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing.
                       ciscoFlashPartitioningSerialNumber 1.3.6.1.4.1.9.9.10.1.2.2.1.1 integer32 no-access
Object which specifies a unique entry in the partitioning operations table. A management station wishing to initiate a partitioning operation should use a pseudo-random value for this object when creating or modifying an instance of a ciscoFlashPartitioningEntry.
                       ciscoFlashPartitioningCommand 1.3.6.1.4.1.9.9.10.1.2.2.1.2 integer read-only
The partitioning command to be executed. Mandatory. If the command is unsupported, the partitioningInvalidOperation error will be reported in the operation status. Command Remarks partition Partition a Flash device. All the prerequisites for partitioning must be met for this command to succeed. Command table Parameters 1) partition PartitioningDestinationName PartitioningPartitionCount PartitioningPartitionSizes (opt) PartitioningNotifyOnCompletion (opt) Enumeration: 'partition': 1.
                       ciscoFlashPartitioningDestinationName 1.3.6.1.4.1.9.9.10.1.2.2.1.3 displaystring read-only
Destination device name. This name will be the value obtained from FlashDeviceName. If the name is not specified, the default Flash device will be assumed.
                       ciscoFlashPartitioningPartitionCount 1.3.6.1.4.1.9.9.10.1.2.2.1.4 unsigned32 read-only
This object is used to specify the number of partitions to be created. Its value cannot exceed the value of ciscoFlashDeviceMaxPartitions. To undo partitioning (revert to a single partition), this object must have the value 1.
                       ciscoFlashPartitioningPartitionSizes 1.3.6.1.4.1.9.9.10.1.2.2.1.5 displaystring read-only
This object is used to explicitly specify the size of each partition to be created. The size of each partition will be in units of ciscoFlashDeviceMinPartitionSize. The value of this object will be in the form: :...: If partition sizes are not specified, the system will calculate default sizes based on the partition count, the minimum partition size, and the device size. Partition size need not be specified when undoing partitioning (partition count is 1). If partition sizes are specified, the number of sizes specified must exactly match the partition count. If not, the partitioning command will be rejected with the invalidPartitionSizes error .
                       ciscoFlashPartitioningStatus 1.3.6.1.4.1.9.9.10.1.2.2.1.6 integer read-only
The status of the specified partitioning operation. partitioningInProgress : specified operation is active partitioningOperationSuccess : specified operation is supported and completed successfully partitioningInvalidOperation : command invalid or command-protocol-device combination unsupported partitioningInvalidDestName : invalid target name (file or partition or device name) specified partitioningInvalidPartitionCount : invalid partition count specified for the partitioning command partitioningInvalidPartitionSizes : invalid partition size, or invalid count of partition sizes partitioningDeviceBusy : specified device is in use and locked by another process partitioningDeviceOpenError : invalid device name partitioningDeviceError : device read, write or erase error partitioningNoMemory : system running low on memory partitioningUnknownFailure : failure unknown Enumeration: 'partitioningUnknownFailure': 11, 'partitioningInvalidPartitionCount': 5, 'partitioningInvalidPartitionSizes': 6, 'partitioningInvalidOperation': 3, 'partitioningInvalidDestName': 4, 'partitioningNoMemory': 10, 'partitioningInProgress': 1, 'partitioningDeviceOpenError': 8, 'partitioningDeviceError': 9, 'partitioningOperationSuccess': 2, 'partitioningDeviceBusy': 7.
                       ciscoFlashPartitioningNotifyOnCompletion 1.3.6.1.4.1.9.9.10.1.2.2.1.7 truthvalue read-only
Specifies whether or not a notification should be generated on the completion of the partitioning operation. If specified, ciscoFlashPartitioningCompletionTrap will be generated. It is the responsibility of the management entity to ensure that the SNMP administrative model is configured in such a way as to allow the notification to be delivered.
                       ciscoFlashPartitioningTime 1.3.6.1.4.1.9.9.10.1.2.2.1.8 timeticks read-only
Time taken for the operation. This object will be like a stopwatch, starting when the operation starts, stopping when the operation completes. If a management entity keeps a database of completion times for various operations, it can then use the stopwatch capability to display percentage completion time.
                       ciscoFlashPartitioningEntryStatus 1.3.6.1.4.1.9.9.10.1.2.2.1.9 rowstatus read-only
The status of this table entry.
               ciscoFlashMiscOpTable 1.3.6.1.4.1.9.9.10.1.2.3 no-access
A table of misc Flash operation entries. Each entry represents a Flash operation that has been initiated.
                   ciscoFlashMiscOpEntry 1.3.6.1.4.1.9.9.10.1.2.3.1 no-access
A Flash operation entry. Each entry consists of a command, a target, and any optional parameters. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. The station should then create the associated instance of the row status object. It must also, either in the same or in successive PDUs, create the associated instance of the command and parameter objects. It should also modify the default values for any of the parameter objects if the defaults are not appropriate. Once the appropriate instances of all the command objects have been created, either by an explicit SNMP set request or by default, the row status should be set to active to initiate the operation. Note that this entire procedure may be initiated via a single set request which specifies a row status of createAndGo as well as specifies valid values for the non-defaulted parameter objects. Once an operation has been activated, it cannot be stopped. Once the operation completes, the management station should retrieve the value of the status object (and time if desired), and delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing.
                       ciscoFlashMiscOpSerialNumber 1.3.6.1.4.1.9.9.10.1.2.3.1.1 integer32 no-access
Object which specifies a unique entry in the table. A management station wishing to initiate a flash operation should use a pseudo-random value for this object when creating or modifying an instance of a ciscoFlashMiscOpEntry.
                       ciscoFlashMiscOpCommand 1.3.6.1.4.1.9.9.10.1.2.3.1.2 integer read-only
The command to be executed. Mandatory. Note that it is possible for a system to support multiple file systems (different file systems on different Flash devices, or different file systems on different partitions within a device). Each such file system may support only a subset of these commands. If a command is unsupported, the miscOpInvalidOperation(3) error will be reported in the operation status. Command Remarks erase Erase flash. verify Verify flash file checksum. delete Delete a file. undelete Revive a deleted file . Note that there are limits on the number of times a file can be deleted and undeleted. When this limit is exceeded, the system will return the appropriate error. squeeze Recover space occupied by deleted files. This command preserves the good files, erases out the file system, then restores the preserved good files. format Format a flash device. Command table Parameters erase MiscOpDestinationName MiscOpNotifyOnCompletion (opt) verify MiscOpDestinationName MiscOpNotifyOnCompletion (opt) delete MiscOpDestinationName MiscOpNotifyOnCompletion (opt) undelete MiscOpDestinationName MiscOpNotifyOnCompletion (opt) squeeze MiscOpDestinationName MiscOpNotifyOnCompletion (opt) format MiscOpDestinationName MiscOpNotifyOnCompletion (opt) Enumeration: 'format': 6, 'undelete': 4, 'verify': 2, 'erase': 1, 'squeeze': 5, 'delete': 3.
                       ciscoFlashMiscOpDestinationName 1.3.6.1.4.1.9.9.10.1.2.3.1.3 displaystring read-only
Destination file, or partition name. File name must be of the form [device>:][:] where is a value obtained from FlashDeviceName, is obtained from FlashPartitionName and is the name of a file in Flash. While leading and/or trailing whitespaces are acceptable, no whitespaces are allowed within the path itself. A management station could derive its own partition name as per the description for the ciscoFlashPartitionName object. If is not specified, the default Flash device will be assumed. If is not specified, the default partition will be assumed. If a device is not partitioned into 2 or more partitions, this value may be left out. For an operation on a partition, eg., the erase command, this object would specify the partition name in the form: [device>:][:]
                       ciscoFlashMiscOpStatus 1.3.6.1.4.1.9.9.10.1.2.3.1.4 integer read-only
The status of the specified operation. miscOpInProgress : specified operation is active miscOpOperationSuccess : specified operation is supported and completed successfully miscOpInvalidOperation : command invalid or command-protocol-device combination unsupported miscOpInvalidDestName : invalid target name (file or partition or device name) specified miscOpDeviceBusy : specified device is in use and locked by another process miscOpDeviceOpenError : invalid device name miscOpDeviceError : device read, write or erase error miscOpDeviceNotProgrammable : device is read-only but a write or erase operation was specified miscOpFileOpenError : invalid file name; file not found in partition miscOpFileDeleteFailure : file could not be deleted; delete count exceeded miscOpFileUndeleteFailure : file could not be undeleted; undelete count exceeded miscOpFileChecksumError : file has a bad checksum miscOpNoMemory : system running low on memory miscOpUnknownFailure : failure unknown miscOpSqueezeFailure : the squeeze operation failed miscOpNoSuchFile : a valid but nonexistent file name was specified miscOpFormatFailure : the format operation failed Enumeration: 'miscOpFileOpenError': 9, 'miscOpNoMemory': 13, 'miscOpInProgress': 1, 'miscOpFileChecksumError': 12, 'miscOpInvalidDestName': 4, 'miscOpFormatFailure': 20, 'miscOpFileUndeleteFailure': 11, 'miscOpSqueezeFailure': 18, 'miscOpDeviceBusy': 5, 'miscOpFileDeleteFailure': 10, 'miscOpNoSuchFile': 19, 'miscOpUnknownFailure': 14, 'miscOpDeviceOpenError': 6, 'miscOpOperationSuccess': 2, 'miscOpDeviceNotProgrammable': 8, 'miscOpDeviceError': 7, 'miscOpInvalidOperation': 3.
                       ciscoFlashMiscOpNotifyOnCompletion 1.3.6.1.4.1.9.9.10.1.2.3.1.5 truthvalue read-only
Specifies whether or not a notification should be generated on the completion of an operation. If specified, ciscoFlashMiscOpCompletionTrap will be generated. It is the responsibility of the management entity to ensure that the SNMP administrative model is configured in such a way as to allow the notification to be delivered.
                       ciscoFlashMiscOpTime 1.3.6.1.4.1.9.9.10.1.2.3.1.6 timeticks read-only
Time taken for the operation. This object will be like a stopwatch, starting when the operation starts, stopping when the operation completes. If a management entity keeps a database of completion times for various operations, it can then use the stopwatch capability to display percentage completion time.
                       ciscoFlashMiscOpEntryStatus 1.3.6.1.4.1.9.9.10.1.2.3.1.7 rowstatus read-only
The status of this table entry.
           ciscoFlashMIBTrapPrefix 1.3.6.1.4.1.9.9.10.1.3
               ciscoFlashMIBTraps 1.3.6.1.4.1.9.9.10.1.3.0
                   ciscoFlashCopyCompletionTrap 1.3.6.1.4.1.9.9.10.1.3.0.1
A ciscoFlashCopyCompletionTrap is sent at the completion of a flash copy operation if such a trap was requested when the operation was initiated.
                   ciscoFlashPartitioningCompletionTrap 1.3.6.1.4.1.9.9.10.1.3.0.2
A ciscoFlashPartitioningCompletionTrap is sent at the completion of a partitioning operation if such a trap was requested when the operation was initiated.
                   ciscoFlashMiscOpCompletionTrap 1.3.6.1.4.1.9.9.10.1.3.0.3
A ciscoFlashMiscOpCompletionTrap is sent at the completion of a miscellaneous flash operation (enumerated in ciscoFlashMiscOpCommand) if such a trap was requested when the operation was initiated.
                   ciscoFlashDeviceChangeTrap 1.3.6.1.4.1.9.9.10.1.3.0.4
A ciscoFlashDeviceChangeTrap is sent whenever a removable Flash device is inserted or removed.
                   ciscoFlashDeviceInsertedNotif 1.3.6.1.4.1.9.9.10.1.3.0.5
A ciscoFlashDeviceInsertedNotif notification is sent whenever a removable Flash device is inserted.
                   ciscoFlashDeviceRemovedNotif 1.3.6.1.4.1.9.9.10.1.3.0.6
A ciscoFlashDeviceRemovedNotif notification is sent whenever a removable Flash device is removed.
                   ciscoFlashDeviceInsertedNotifRev1 1.3.6.1.4.1.9.9.10.1.3.0.7
A ciscoFlashDeviceInsertedNotif notification is sent whenever a removable Flash device is inserted ciscoFlashDeviceInsertedNotifRev1 depcrecates ciscoFlashDeviceInsertedNotif since it uses ciscoFlashDeviceName as a varbind which is deprecated
                   ciscoFlashDeviceRemovedNotifRev1 1.3.6.1.4.1.9.9.10.1.3.0.8
A ciscoFlashDeviceRemovedNotif notification is sent whenever a removable Flash device is removed. ciscoFlashDeviceRemovedNotifRev1 depcrecates ciscoFlashDeviceRemovedNotif since it uses ciscoFlashDeviceName as a varbind which is deprecated
                   ciscoFlashPartitionLowSpaceNotif 1.3.6.1.4.1.9.9.10.1.3.0.9
A ciscoFlashPartitionLowSpaceNotif notification is sent when the percentage of free space in a flash partition falls below ciscoFlashPartitionLowSpaceNotifThreshold.This notification will be generated when the value of ciscoFlashPartitionLowSpaceNotifEnable is true. ciscoFlashPartitionName indicates the name of the flash partition for which this notification has been sent. ciscoFlashPartitionFreeSpaceExtended indicates the free space available with in the flash partition. ciscoFlashPartitionLowSpaceNotifThreshold indicates the minimum threshold value in percentage of free space for each partition.
                   ciscoFlashPartitionLowSpaceRecoveryNotif 1.3.6.1.4.1.9.9.10.1.3.0.10
A ciscoFlashPartitionLowSpaceRecoveryNotif notification is sent whenever the free space in a flash partition becomes normal once it has gone low. This notification will be generated when the value of ciscoFlashPartitionLowSpaceNotifEnable is true. This trap is generated as a recovery notification for ciscoFlashPartitionLowSpaceNotif. ciscoFlashPartitionName indicates the name of the flash partition for which this notification has been sent. ciscoFlashPartitionFreeSpaceExtended indicates the free space available with in the flash partition. ciscoFlashPartitionLowSpaceNotifThreshold indicates the minimum threshold value in percentage of free space for each partition.
           ciscoFlashCfg 1.3.6.1.4.1.9.9.10.1.4
               ciscoFlashCfgDevInsNotifEnable 1.3.6.1.4.1.9.9.10.1.4.1 truthvalue read-write
Specifies whether or not a notification should be generated on the insertion of a Flash device. If the value of this object is 'true' then the ciscoFlashDeviceInsertedNotif notification will be generated. If the value of this object is 'false' then the ciscoFlashDeviceInsertedNotif notification will not be generated. It is the responsibility of the management entity to ensure that the SNMP administrative model is configured in such a way as to allow the notification to be delivered.
               ciscoFlashCfgDevRemNotifEnable 1.3.6.1.4.1.9.9.10.1.4.2 truthvalue read-write
Specifies whether or not a notification should be generated on the removal of a Flash device. If the value of this object is 'true' then the ciscoFlashDeviceRemovedNotif notification will be generated. If the value of this object is 'false' then the ciscoFlashDeviceRemovedNotif notification will not be generated. It is the responsibility of the management entity to ensure that the SNMP administrative model is configured in such a way as to allow the notification to be delivered.
               ciscoFlashPartitionLowSpaceNotifEnable 1.3.6.1.4.1.9.9.10.1.4.3 truthvalue read-write
This object specifies whether or not a notification should be generated when the free space falls below the threshold value on a flash partition and on recovery from low space. If the value of this object is 'true' then ciscoFlashPartitionLowSpaceNotif and ciscoFlashPartitionLowSpaceRecoveryNotif notifications will be generated. If the value of this object is 'false' then the ciscoFlashPartitionLowSpaceNotif and ciscoFlashPartitionLowSpaceRecoveryNotif notifications will not be generated. It is the responsibility of the management entity to ensure that the SNMP administrative model is configured in such a way as to allow the notifications to be delivered.
       ciscoFlashMIBConformance 1.3.6.1.4.1.9.9.10.2
           ciscoFlashMIBCompliances 1.3.6.1.4.1.9.9.10.2.1
               ciscoFlashMIBCompliance 1.3.6.1.4.1.9.9.10.2.1.1
The compliance statement for entities that support the Cisco Flash MIB.
               ciscoFlashMIBComplianceRev1 1.3.6.1.4.1.9.9.10.2.1.2
The compliance statement for entities that support the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev2.
               ciscoFlashMIBComplianceRev2 1.3.6.1.4.1.9.9.10.2.1.3
The compliance statement for entities that support the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev3.
               ciscoFlashMIBComplianceRev3 1.3.6.1.4.1.9.9.10.2.1.4
The compliance statement for entities that support the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev4.
               ciscoFlashMIBComplianceRev4 1.3.6.1.4.1.9.9.10.2.1.5
The compliance statement for entities that support the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev5.
               ciscoFlashMIBComplianceRev5 1.3.6.1.4.1.9.9.10.2.1.6
The compliance statement for entities that support the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev6.
               ciscoFlashMIBComplianceRev6 1.3.6.1.4.1.9.9.10.2.1.7
The compliance statement for entities that support the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev7.
               ciscoFlashMIBComplianceRev7 1.3.6.1.4.1.9.9.10.2.1.8
The compliance statement for entities that support the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev8.
               ciscoFlashMIBComplianceRev8 1.3.6.1.4.1.9.9.10.2.1.9
The compliance statement for entities that support the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev9.
               ciscoFlashMIBComplianceRev9 1.3.6.1.4.1.9.9.10.2.1.10
The compliance statement for entities that support the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev10.
               ciscoFlashMIBComplianceRev10 1.3.6.1.4.1.9.9.10.2.1.11
The compliance statement for entities that supports the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev11.
               ciscoFlashMIBComplianceRev11 1.3.6.1.4.1.9.9.10.2.1.12
The compliance statement for entities that supports the Cisco Flash MIB.
           ciscoFlashMIBGroups 1.3.6.1.4.1.9.9.10.2.2
               ciscoFlashDeviceInfoGroup 1.3.6.1.4.1.9.9.10.2.2.1
A collection of objects providing mandatory Flash device level information.
               ciscoFlashDeviceOptionalInfoGroup 1.3.6.1.4.1.9.9.10.2.2.2
A collection of optional objects providing Flash device level information.
               ciscoFlashChipInfoGroup 1.3.6.1.4.1.9.9.10.2.2.3
A collection of objects providing Flash chip level information.
               ciscoFlashPartitionInfoGroup 1.3.6.1.4.1.9.9.10.2.2.4
A collection of objects providing Flash partition level information. Where a Flash device has not been partitioned or does not support partitioning, a partition is synonymous with the entire device.
               ciscoFlashFileInfoGroup 1.3.6.1.4.1.9.9.10.2.2.5
A collection of objects providing Flash file level information.
               ciscoFlashCopyOpGroup 1.3.6.1.4.1.9.9.10.2.2.6
A collection of objects providing the ability to copy files to and from a Flash partition.
               ciscoFlashPartitioningOpGroup 1.3.6.1.4.1.9.9.10.2.2.7
A collection of objects providing the ability to partition a Flash device.
               ciscoFlashMiscOpGroup 1.3.6.1.4.1.9.9.10.2.2.8
A collection of objects providing the ability to perform misc operations (erase, file verification, etc) in a Flash device.
               ciscoFlashNotifGroup 1.3.6.1.4.1.9.9.10.2.2.9
The set of notification defined by this MIB.
               ciscoFlashFileInfoGroupRev1 1.3.6.1.4.1.9.9.10.2.2.10
A collection of objects providing Flash file level information.
               ciscoFlashNotifGroupRev1 1.3.6.1.4.1.9.9.10.2.2.11
The set of notification defined by this MIB.
               ciscoFlashDeviceInfoGroupRev1 1.3.6.1.4.1.9.9.10.2.2.12
A collection of objects providing mandatory Flash device level information.
               ciscoFlashDeviceOptionalInfoGroupRev1 1.3.6.1.4.1.9.9.10.2.2.13
A collection of optional objects providing Flash device level information. This deprecates ciscoFlashDeviceOptionalInfoGroup object group.
               ciscoFlashCopyOpGroupRev1 1.3.6.1.4.1.9.9.10.2.2.14
A collection of objects providing the ability to copy files to and from a Flash partition. This group is deprecated by new group ciscoFlashCopyOpGroupRev2.
               ciscoFlashDeviceInfoGroupRev2 1.3.6.1.4.1.9.9.10.2.2.15
A collection of objects providing mandatory Flash device level information.
               ciscoFlashCopyOpGroupRev2 1.3.6.1.4.1.9.9.10.2.2.16
A collection of objects providing the ability to copy files to and from a Flash partition. This Group deprecates ciscoFlashCopyOpGroupRev1.
               ciscoFlashNotifGroupRev2 1.3.6.1.4.1.9.9.10.2.2.17
The set of notification defined by this MIB. ciscoFlashNotifGroupRev2 object is superseded by ciscoFlashNotifGroupRev3.
               ciscoFlashCopyOpGroupRev3 1.3.6.1.4.1.9.9.10.2.2.18
A collection of objects providing the ability to copy files to and from a Flash partition. This Group supplements ciscoFlashCopyOpGroupRev2.
               ciscoFlashFileInfoGroupSupp1 1.3.6.1.4.1.9.9.10.2.2.19
A collection of objects providing Flash file level information in addition to the objects found in ciscoFlashFileInfoGroupRev1.
               ciscoFlashFileTypeInfoGroup 1.3.6.1.4.1.9.9.10.2.2.20
A collection of objects providing Flash file information which are sorted by file type.
               ciscoFlashDeviceInfoExtGroup 1.3.6.1.4.1.9.9.10.2.2.21
A collection of objects providing high capacity mandatory Flash device level information.
               ciscoFlashPartitionInfoExtGroup 1.3.6.1.4.1.9.9.10.2.2.22
A collection of objects providing haigh capacity Flash partition level information.
               ciscoFlashDeviceInfoExtGroupSupRev1 1.3.6.1.4.1.9.9.10.2.2.23
A collection of objects providing high capacity mandatory Flash device level information. This Group is supplement to ciscoFlashDeviceInfoExtGroup.
               ciscoFlashPartitionInfoGroupRev1 1.3.6.1.4.1.9.9.10.2.2.24
A collection of objects providing Flash partition level information. Where a Flash device has not been partitioned or does not support partitioning, a partition is synonymous with the entire device.
               ciscoFlashNotifGroupRev3 1.3.6.1.4.1.9.9.10.2.2.25
The set of notification defined by this MIB.