CISCO-ATM-CONN-INFO-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-ATM-CONN-INFO-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, CISCO-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoAtmConnInfoMIB 1.3.6.1.4.1.9.9.9999
The MIB module for providing the parameters configured on an ATM interface. Terminologies used: SVC : Switched Virtual Channel SPVC : Soft Permanent Virtual Circuit SPVP : Soft Permanent Virtual Path SVPC : Switched Virtual Path Connection DAX : Connection with endpoints on the same ATM switch P2p : Point-to-point connection P2mp : Point-to-multi-point connection Root : The root of point-to-multipoint connection, which is associated with a VPI/VCI Leaf : Usually one point-to-multipoint connection consists of one root and one or more leaves. Leaf is the branch point for point to multipoint connection that is associated with a VPI/VCI Party: One or more party is associated with each leaf, all parties are associated with the same VPI/VCI that its leaf belongs to Source Via Node Destination ------- ------- ------- A| |B C| |D E| |F --+-----+----------+-----+------------+-----+-- | | | | | | ------- ------- ------- Each active connection has two terminating endpoints. In the above diagram, Endpoints A and F are terminating. Of these the master endpoint of the connection initiates the routing of the call and is considered the calling party. The slave endpoint is the called party which receives calls and is the destination of a call. Any endpoints that are created either on Via nodes or on the node with the terminating endpoint in order to have a complete connections between endpoints A and F are said to be intermediate endpoints. In the above diagram, endpoints B, C, D and E are intermediate endpoints.
           caciMIBNotifications 1.3.6.1.4.1.9.9.9999.0
           caciMIBObjects 1.3.6.1.4.1.9.9.9999.1
               caciAtmConnInfo 1.3.6.1.4.1.9.9.9999.1.1
                   caciIfInfo 1.3.6.1.4.1.9.9.9999.1.1.1
                       caciConnInfoTable 1.3.6.1.4.1.9.9.9999.1.1.1.1 no-access
The Connection Statistics table. This table has the number of connections per interface.
                           caciConnInfoEntry 1.3.6.1.4.1.9.9.9999.1.1.1.1.1 no-access
An entry in the caciConnInfoTable. Each entry in ifTable with ifType values: atm(37), atmLogical(80) or atmVirtual(149) has an associated entry in this table.
                               caciGeneralConnEPCategory 1.3.6.1.4.1.9.9.9999.1.1.1.1.1.1 cacigeneralconnepcategory no-access
The general connection or endpoint category on this ATM switch.
                               caciNumUsedConns 1.3.6.1.4.1.9.9.9999.1.1.1.1.1.2 gauge32 read-only
This object specifies the total number of used connections of type caciGeneralConnEPCategory on this interface.
                   caciP2pConns 1.3.6.1.4.1.9.9.9999.1.1.2
                       caciP2pConnTable 1.3.6.1.4.1.9.9.9999.1.1.2.1 no-access
The table contains number of connection per CaciP2pConnCategory.
                           caciP2pConnEntry 1.3.6.1.4.1.9.9.9999.1.1.2.1.1 no-access
An entry in the table specifying the number of connections for the corresponding CaciP2pConnCategory.
                               caciP2pConnectionCategory 1.3.6.1.4.1.9.9.9999.1.1.2.1.1.1 cacip2pconncategory no-access
The connection category.
                               caciP2pTotalConns 1.3.6.1.4.1.9.9.9999.1.1.2.1.1.2 gauge32 read-only
The total number of P2p connections of type CaciP2pConnCategory configured on this ATM switch.
                   caciP2pEndpoints 1.3.6.1.4.1.9.9.9999.1.1.3
                       caciP2pEndpointTable 1.3.6.1.4.1.9.9.9999.1.1.3.1 no-access
The table contains number of endpoints per CaciP2pEndpointCategory.
                           caciP2pEndpointEntry 1.3.6.1.4.1.9.9.9999.1.1.3.1.1 no-access
An entry in the table specifying the number of endpoints for the corresponding CaciP2pEndpointCategory.
                               caciP2pEndptCategory 1.3.6.1.4.1.9.9.9999.1.1.3.1.1.1 cacip2pendpointcategory no-access
The point to point endpoint category.
                               caciP2pTotalConfEndpoints 1.3.6.1.4.1.9.9.9999.1.1.3.1.1.2 gauge32 read-only
The number of total P2p enpoints of type CaciP2pEndpointCategory configured on this ATM switch.
                   caciP2pIntEndpoints 1.3.6.1.4.1.9.9.9999.1.1.4
                       caciP2pIntEndpointTable 1.3.6.1.4.1.9.9.9999.1.1.4.1 no-access
The table contains number of endpoints per CaciP2pIntEndpointCategory.
                           caciP2pIntEndpointEntry 1.3.6.1.4.1.9.9.9999.1.1.4.1.1 no-access
An entry in the table specifying the number of endpoints for the corresponding CaciP2pIntEndpointCategory.
                               caciP2pIntEndptCategory 1.3.6.1.4.1.9.9.9999.1.1.4.1.1.1 cacip2pintendpointcategory no-access
The point to point intermediate endpoint category.
                               caciP2pTotalIntEndpoints 1.3.6.1.4.1.9.9.9999.1.1.4.1.1.2 gauge32 read-only
The total number of P2p intermediate enpoints of type CaciP2pIntEndpointCategory present on this ATM switch.
                   caciP2mpConns 1.3.6.1.4.1.9.9.9999.1.1.5
                       caciP2mpConnTable 1.3.6.1.4.1.9.9.9999.1.1.5.1 no-access
The table contains number of connection per CaciP2mpConnCategory.
                           caciP2mpConnEntry 1.3.6.1.4.1.9.9.9999.1.1.5.1.1 no-access
An entry in the table specifying the number of connections for the corresponding CaciP2mpConnCategory.
                               caciP2mpConnectionCategory 1.3.6.1.4.1.9.9.9999.1.1.5.1.1.1 cacip2mpconncategory no-access
The point to multi point connection category.
                               caciP2mpTotalConfConns 1.3.6.1.4.1.9.9.9999.1.1.5.1.1.2 gauge32 read-only
The total number of P2mp connections of type CaciP2mpConnCategory configured on this ATM switch.
                   caciGeneric 1.3.6.1.4.1.9.9.9999.1.1.6
                       caciP2pTotalConfConns 1.3.6.1.4.1.9.9.9999.1.1.6.1 unsigned32 read-only
This object specifies the total point to point connections that are configured on this ATM switch.
                       caciP2pMaxPossibleConns 1.3.6.1.4.1.9.9.9999.1.1.6.2 unsigned32 read-only
This object specifies the upper limit of the point to point and point to multipoint connections that are allowed to be configured on this ATM switch.
                       caciMaxPossibleEndpoints 1.3.6.1.4.1.9.9.9999.1.1.6.3 unsigned32 read-only
This object specifies the upper limit of all the possible endpoints that are allowed to be configured on this ATM switch.
                       caciGenericEndpointTable 1.3.6.1.4.1.9.9.9999.1.1.6.4 no-access
The table contains number of connection per CaciATMEndpointCategory.
                           caciGenericEndpointEntry 1.3.6.1.4.1.9.9.9999.1.1.6.4.1 no-access
An entry in the table specifying the number of connections for the corresponding CaciATMEndpointCategory.
                               caciATMEndpointCategory 1.3.6.1.4.1.9.9.9999.1.1.6.4.1.1 caciatmendpointcategory no-access
Endpoint category corresponding to CaciATMEndpointCategory.
                               caciTotalEndpoints 1.3.6.1.4.1.9.9.9999.1.1.6.4.1.2 gauge32 read-only
The total number of endpoints of caciATMEndpointCategory configured on this ATM switch.
           ciscoAtmConnInfoMIBConformance 1.3.6.1.4.1.9.9.9999.2
               ciscoAtmConnInfoMIBCompliances 1.3.6.1.4.1.9.9.9999.2.1
                   ciscoAtmConnInfoMIBCompliance 1.3.6.1.4.1.9.9.9999.2.1.1
The Compliance statement for ciscoAtm management group.
               ciscoAtmConnInfoMIBGroups 1.3.6.1.4.1.9.9.9999.2.2
                   ciscoConnInfoConfMIBGroup 1.3.6.1.4.1.9.9.9999.2.2.1
Objects used for representing connection statistical details about an interface.
                   ciscoP2pConnsMIBGroup 1.3.6.1.4.1.9.9.9999.2.2.2
Objects used for representing the point to point connections of a particular CaP2pConnCategory.
                   ciscoP2pEndpointsMIBGroup 1.3.6.1.4.1.9.9.9999.2.2.3
Objects used for representing the point to point endpoints of a particular CaP2pEndpointCategory.
                   ciscoP2pIntEndpointsMIBGroup 1.3.6.1.4.1.9.9.9999.2.2.4
Objects used for representing the point to point intermediate endpoints of a particular CaP2pIntEndpointCategory.
                   ciscoP2mpConnsMIBGroup 1.3.6.1.4.1.9.9.9999.2.2.5
Objects used for representing the point to multi point connections of a particular CaP2mpConnCategory.
                   ciscoTotalConnsMIBGroup 1.3.6.1.4.1.9.9.9999.2.2.6
Objects used for representing the total connections on the ATM switch.
                   ciscoTotalEndpointsMIBGroup 1.3.6.1.4.1.9.9.9999.2.2.7
Objects used for representing the total endpoints on the ATM switch.